11 July 2007

By: Roxana Deduleasa, Gadget News Editor
Samsung Takes Glamorous YV-150 Voice Pen to Another Level!
The DAP is going to be marketed this summer
It's not a secret anymore! Samsung has come up with some pretty nice looking MP3 players in the past; some of the nice features applied to the YV-150 voice recorder, too. The recorder features a hands-free microphone and a phone adapter, which proves once again the quality of this device.After the stylish K5 and K3 mp3 versions that created a stir on the market, the new Samsung YV-150 respects the same well crafted piano black design. This pen-like designed DAP is capable of playing MP3, WMA and WMA-DRM music files, and it sports the good old FM tuner as well, while the spoken voice can be recorded in three ways: SP at 32kbps, HQ at 64kbps, and SHQ at 128kbps. The voice activated recording stops the process the moment the subject stops talking. After the recording, five folders allow the user to save the recording, and the integrated file browser allows an easy management of the recordings. The YV-150 voice pen comes with an included text-to-speech program, capable of converting text files into MP3 voice files, so you can comfortably listen to a file on the PC after the transfer.Following the latest trend in the industry of incorporating speakers into the systems, the manufacturers added a small speaker in the recorder, located behind the device. But the most impressive detail is the battery life rated at 66 hours of continuous recording, courtesy of just a couple of AAA sized batteries. The playing time is claimed to be of up to 20 hours.When using the device, you should know that the recording quality also affects the battery life, probably because the signal processor has more work to do. But this will surely kick some asses in the industry, since it comes flavored with 1GB and 2GB storage capacities, not to mention the addition of an SD card, which will definitely extend the joy. The good news is that the player can work with six different languages, including English. All in all, this new DAP/voice recorder proves once again that the fellows from Samsung are into more serious stuff than just some gorgeous design.
Samsung YV-150 Voice Recorder Samsung
Page 1 Copyright (c) 2001-2011 Softpedia. All rights reserved. Softpedia and Softpedia logo are registered trademarks of SoftNews NET SRL.

Operating Instructions For CABLEVISION Remote Control

UR2-CBL-CV04

1 Introduction
The remote control is designed to operate the Scientific-Atlanta Explorer 8000, Pioneer Voyager DVR and the Pace Micro DVR Series set top boxes and the majority of TV's on the market.

3 Button Functions

2 Replacing Batteries
Before you program or operate the remote control, you must install two AA alkaline batteries. STEP1 Remove the battery compartment cover on the back of your remote control. STEP2 Check battery polarity carefully, and install the batteries as shown in the illustration below. STEP3 Replace the battery compartment cover.
STEP3 Point the remote control toward the TV and enter the three-digit code number assigned to your brand from the code tables. *Tip : The TV will turn off when the correct threedigit code number has been entered. You can verify you have selected the correct code by pressing the [MUTE] button, the TV should turn on or turn off. *Note : If there is more than one three-digit number listed for your brand, try one code number at a time until your TV turns off. STEP4 Store the three-digit code number by pressing the [TV] button once again. The iO button will blink twice to confirm that the code has been stored. *Note : Try all the functions on the remote control. If any of the functions do not work as they should, repeat from Step 2 using the next threedigit code number from the same brand list.

B. Auto Search Method.

If the three-digit code numbers assigned to your brand do not turn off your TV or the code tables do not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your TV by the following steps: STEP1 Turn on the TV you wish to operate. STEP2 Press the [TV] button and the [SEL] button simultaneously for 3 seconds. The iO button will turn on. *Tip: The iO button will light on for 20 seconds. The next step must be entered while the iO button is on. STEP3 Press the [CH+] or [CH-] button one step at a time or keep it pressed. The remote will emit a series of Power ON/OFF commands. Release the [CH+] or [CH-] button as soon as the TV turns off. *Tip: You can verify that you selected the correct code by pressing the [MUTE] button. The TV should either turn on or turn off. STEP4 Press the [TV] button to store the code. The iO button will blink twice to confirm that the code has been stored.

4 Operations

Default State : Device Default: Scientific-Atlanta Explorer 8000 Volume Default : TV volume and mute through the TV, with the option of controlling volume and mute through the Cable. Refer to Section D for programming the volume and mute through your Cable.
5 Programming the Remote Control.
A. Three-Digit Code Programming Method.
The remote control can be programmed by pressing in a three digit code number that corresponds to particular manufacturers and brands of TV. The three-digit code numbers are listed in the code table of the instruction manual. STEP1 Turn on the TV you wish to program. STEP2 Press the [TV] button and the [SEL] button simultaneously for 3 seconds. The iO button will turn on indicating the unit is ready to be programmed. *Tip : The iO button will light on for 20 seconds. The next step must be entered while the iO button is on.
Universal Remote Control, Inc.

www.universalremote.com

OCE-0030A Rev 17(05/13/10)
C. To Find the Three Digit Code Number That was Stored in the TV.
STEP1 Press the [TV] button and the [SEL] button simultaneously for 3 seconds.
*Tip: The iO button will light on for 20 seconds. The next step must be entered while the iO button is on. STEP2 Press the [INFO] button. The iO button will blink number of times indicating the number of each digit of the code number. Each digit is separated by a 1 second interval of the iO button being turned off. Example :One blink, three blinks and eight blinks with an interval of 1 second of iO button being turned off, indicates the code number 138. Note :Ten blinks is equal to the number 0.

6 TV Code Tables

MAKER(BRAND) NAME
ADMIRAL ADVENT AIWA AKAI AKIO ALARON ALBATRON AMARK AMERICA ACTION AMERICAN HIGH AMPRO ANAM AOC APEX APEX DIGITAL AQUAVISION ASTAR AUDIOVOX AVION AXION BAYSONIC BELL&HOWELL BENQ BRADFORD BROKSONIC BYDESIGN CAIRN CANDLE CANON CAPEHART CARVER CELEBRITY CETRONIC CINERAL CITIZEN CLASSIC CONCERTO CONTEC CORONADO CRAIG CROSLEY CROWN CURTIS MATHES CXC DAEWOO DAYTRON DELL DENON DIGITAL LIFESTYLE DIGITAL PROJECTION DIGITAL RESEARCH DIGITRON DISNEY DREAMVISION DUMONT DURABRAND DWIN DYNASTY DYNATECH DYNEX ELECTROBAND ELECTROGRAPH ELECTROHOME ELEMENT EMERSON

ENVISION EPSON ESA FISHER FUJITSU FUNAI FUTURETECH GATEWAY GE GEM GIBRALTER GO VIDEO GOLDSTAR GPX GRUNPY H&B HAIER HALL MARK HANNSPREE HARLEY DAVIDSON HARSPER HARMAN KARDON HARVARD HISENSE HITACHI HP HQ HUMAX HYPERION HYUNDAI ILO INFINITY INFOCUS INKEL INSIGNIA INSTANTREPLAY INTEQ JBL JCB JCL JCPENNEY JENSEN JVC KENWOOD KLEGG KLOSS KONKA KREISEN KTV LG LLOYD LODGENET LOEWE LOGIK LUXMAN LXI MAGIN MAGNAVOX MAJESTIC MARANTZ MARTA MATSUI MATSUSHITA MAXENT
CODE NUMBER (3 DIGIT) LIST

080 165

MEGAPOWER MEGATRON MEI MEMOREX METZ MGA MIDLAND MINERVA MINTEK MINUTZ MITSUBISHI MONIVISION MOTOROLA MTC MULTITECH NAD NEC NIKEI NIKKO NIKO NORCENT NORWOOD MICRO NTC NUVISION OLEVIA ONKING ONWA OPTIMUS OPTOMA OPTONICA ORION PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER POLAROID PORTLAND PRISM PRIMA PROSCAN PROTON PROTRON PROVIEW PROX PYLE QUASAR RADIO SHACK RCA REALISTIC REVOLUTION HD RICO RUNCO SABIO SAMPO SAMSUNG SANSEI SANSUI SANYO SCEPTRE SCOTCH SCOTT
SEARS SELECO SEMIVOX SEMP SHARP SHERWOOD SIGNATURE SKYWORTH SOLE SONY SOUNDESIGN SOVA SOYO SPECTRICON SPECTRONIQ SQUAREVIEW SSS STARLITE SUNBRITE TV SUPERSCAN SUPRE MACY SUPREME SV2000 SVA SYLVANIA SYMPHONIC SYNTAX OLEVIA TANDY TATUNG TEAC TECHNICS TECHNOL ACE TECHVIEW TECHWOOD TEKNIKA TELERENT TERA THOMPSON TNCI TMK TOSHIBA TOTEVISION TRUTECH UNITECH UNIVERSAL VENTURER VIDEO CONCEPTS VIDEOSONIC VIDIKRON VIDTECH VIEWSONIC VIORE VISCO VITO VIZIO WARDS WESTINGHOUSE WINBOOK YAMAHA YORK YUPITERU ZENITH ZONDA

121 514

D. Program the Volume Controls.
By following the steps below, the user can program the volume controls (Volume UP, Volume Down and MUTE). The default volume control settings on the remote control is TV volume control. If you wish you can control the volume via your CABLE box, use the following steps. STEP1 Press the [CBL] button and the [SEL] button simultaneously for 3 seconds. The iO button will turn on. *Tip : The iO button will light on for 20 seconds. The next step must be entered while the iO button is on. STEP2 Press the [VOL +] button. STEP3 Press the [CBL] button. The iO button will blink twice to confirm the programming. To return to original state: If you wish you can control the volume via your TV, repeat the above steps by pressing [TV] in STEP3.

E. Low Battery Warning.

When the battery is low (2.0V-2.3V) and needs to be replaced with fresh batteries, the iO button will blink whenever a [DEVICE] button is pressed to turn on equipment.

F. Memory Lock System.

This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control.
G. Write your TV Set-up codes:
Set-up Code Number : For additional information about your remote control, go to www.universalremote.com