Package contents

Make sure your package includes the following items. For CLT-D6620/CLT-D6620(WH) Base unit (1) Handset (1) Rechargeable battery pack (pre-installed)(1) AC adapter (1) Telephone line cord (1) Belt clip (1) Cleaning cloth (1) This user manual For CLT-D6622/CLT-D6622(WH) Base unit (1) Handset (2) Charging cradle (1) Rechargeable battery pack (pre-installed) (2) AC adapter (2) Telephone line cord (1) Belt clip (2) Cleaning cloth (1) This user manual
For CLT-D6623/CLT-D6623(WH) Base unit (1) Handset (3) Charging cradle (2) Rechargeable battery pack (pre-installed) (3) AC adapter (3) Telephone line cord (1) Belt clip (3) Cleaning cloth (1) This user manual NOTE: Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings.

NAMES AND CONTROLS

Touch handset
1. Receiver 2. LCD Display 3. CID / VOL / / Keys: volume control; view caller ID log; navigate menus and settings 4. : answer and dial calls; activate speakerphone 5. : view, dial previous calls; format area code/long distance numbers 6. 1 - 9: enter numbers and characters 7. : enter special characters 8. : enter numbers and special characters
:activate call waiting; 9. delete text; exit submenu 10. : go to menu; enter setting and confirm ok; mute function during a call 11.Microphone 12. Detachable belt clip 13. Headset jack 14. : end calls; exit to standby mode 15. Speaker 16. : enter phonebook 17. : CONFERENCE / #: toggle capitals and small letters when entering text 18. : INTERCOM: dial internal line

Base Unit (cradle)

1. PAGE: pages handset 2. Charging contacts 3. Charge/In use LED: Line status and voice message indicator

LCD Display symbols

SYMBOL DESCRIPTION Signal within range Key lock activated Ringer silenced Alarm set Small letters activated Message waiting Battery full
TOUCH PHONE USE AND HANDLING
The touch panel handset offers a new experience in telephone communication. This Touch keypad technology is very sensitive and may take a little time to get used to. To avoid accidental key contact while talking,first lift the handset to touch your ear, pause a brief moment, and then move the lower portion of the phone closer to your mouth. The keypad will automatically disable when the receiver first touches your ear. This feature reduces the risk of accidental keypad activation while the phone is held against the side of your face. To properly use your Touch phone, pick it up from the back and sides and cradle it in your hand. While talking, avoid touching the key pad area unnecessarily to prevent accidental triggering of the keypad. It is very easy to tell when the keypad is disabled, as the keypad backlight will be off. To turn keypad backlight on and activate the keypad, touch any of the number keys, wait for the backlight to come on and then dial normally. NOTE: If more than one key area is touched,the keypad may not activate. During a call, the keypad will automatically disable and the backlight will turn off. When the backlight turns off and when you want to end the call, the first key-press key will only wake up the keypad, and a second of the press of the key will be required to terminate the call. When dialing digits, hold the handset away from the LCD area as shown. Touching the LCD display may trigger the automatic keypad lock sensor and prevent you from dialing. If the keypad lock sensor is triggered, a small key will appear in the top left corner of the display. To maximize the touch keypad performance, use the cleaning cloth that supplied with the phone to keep the keypad clean. safety and care Observe the following safety precautions and warnings when setting up and using this product.

Safety and care

LCD panel The LCD panel is made of glass, and may break if the unit is dropped. Place the unit securely on a stable surface.

safety and care

Heat sources Keep the product away from heat sources, such as radiators, stoves, heaters, and other heat-generating products. Water and moisture Do not use the product in or near water or in high moisture areas, such as a bathroom.

Caring for your product

Do not clean any part of your phone with benzene, thinner or other solvent chemicals as this may cause permanent damage that is not covered by the warranty. When necessary, clean it with a damp cloth. Keep your phone away from hot, humid conditions or strong sunlight. Never immerse the unit in water or use your phone outdoors in the rain, or handle it with wet hands. Do not subject the base unit to extreme force, shock, or fluctuations in humidity. Do not tamper with the internal components or disassemble the unit. Every effort has been made to ensure the highest standards of reliability for your phone. However, if something does go wrong, do not try to repair it yourself consult your supplier.

Caution

Dispose of old, defective batteries in an environmentally friendly manner in accordance with the relevant legislation.For information, go to www.rbrc.ca No exposed flames, such as lighted candles, should not be placed near the apparatus. Never use your phone in the open air during a thunderstorm unplug the base unit from the phone line and the main socket when there are storms in your area. Do not install the base unit near a sink, bath or shower, or anywhere else where it could get wet. Electrical equipment can cause serious in jury if used while you are wet or standing in water. If the base unit ever falls into water, do not retrieve it until you have unplugged the power lead from the mains and the phone line plug from the phone socket; then pull it out by the unplugged cables. When handling batteries exercise care. Contact with conductive materials can short the batteries. To avoid the risk of fire, never use non-rechargeable batteries.

Telephone line connection
Once the handset battery is fully charged, connect the telephone line cord to the THE LINE jack on the back of the base. Plug the other end into a telephone outlet.

Low battery warning

The battery icon indicates the battery status: FULL EMPTY
1. If the battery power is low, and the phone is in TALK mode, a warning tone will sound from the handset and ' LOW BATTERY ' will appear on the screen. 2. If the battery is low and the phone is in STANDBY mode, ' LOW BATTERY ' will appear on the screen. Removing and replacing handset battery pack After years of use,all NiMH rechargeable batteries loose the ability to hold a full charge and may need to be replaced. The handset uses 1 NiMH 650 mAh 3.6V (AAA) rechargeable battery pack. Only replace with an approved battery pack available through SANYO. Contact the SANYO Customer Service Center at 1-800-263-2244 to order. WARNING:There is a risk of explosion if battery pack is replaced with an incorrect type. Dispose of used battery pack according to your local waste management guidelines. To install a replacement handset battery pack: 1. Remove the battery door cover on the telephone handset. 2. Insert the battery pack according to polarity engraved as shown. 3. Slide the cover back on so that it clicks firmly into place.
NOTE: Before using the handset and to prolong battery life, place the handset in the base handset cradle and charge for at least 15 hours.

Attaching the belt clip

Belt clip installation 1. Attach the belt clip by inserting the sides of the belt clip into the slots. 2. Snap the ends of the belt clip into place.

BASIC FUNCTIONS

Standby mode and sleep mode
When the handset has been inactive for a while, it will enter sleep mode and the LCD backlight and key lights will switch off. Touch any key to return to standby mode. The LCD backlight and key lights will activate to indicate standby mode. To adjust the time from standby to sleep mode, please refer to HANDSET SETTINGS - CHANGE DISPLAY SETTINGS (page 25). NOTE: If keylock is on you will need to unlock phone to enter standby mode.
Making and receiving calls
To make a call: to get a dial tone. Touch Enter destination phone number using 0 - 9. If you make an error, touch to cancel.

PHONEBOOK

The phonebook can store up to 60 phone numbers (of up to 24 digits) and names (up to 16 characters).

Storing numbers

1. Touch 2. Touch 3. Touch.
.The cursor is pointing to ADD RECORD. again to confirm.
NOTE: When the memory is full, you will hear a beep and 'PHONEBOOK FULL' appears. You cannot store names and numbers. 4. Enter the name using 1 - 9 (see TO INPUT NAMES below). 5. 6. Touch to confirm and save name. Enter the number using 1 - 9, *, #. If you wish to add a pause, touch key at the desired location. 'P' will appear on the screen. Each pause counts as one digit.
7. Touch to confirm and save entry. NOTE: A number can be saved without entering a name. To input names: 1. Touch a number key (0-9) repeatedly within one second until the desired character appears. 2. Touch a different key to input the next character or if the next character uses the same number key, you must wait for 1 second until the cursor move to next digit and then touch the same number key to input character. 3. Repeat steps 1 and 2 until the name is entered.
Using handset keys to enter text Characters are entered by touching the 0 - 9 keys. A consecutive touch of the same key will enter a different character according to the table below: KEY CAPITAL LETTERS SPACE 1 _ - + = ^. , ; : ABC2 DEF3 GHI4 JKL5 MNO6 PQRS7 TUV8 WXYZ ( ) [ ] < > { } * # ? ! $ &% / \ | ~ SMALL LETTERS SPACE 1 _ - + = ^. , ; : abc2 def3 ghi4 jkl5 mno6 pqrs7 tuv8 wxyz9 0()[]<>{} * # ? ! $ &% / \ | ~
Change between capital and small letters To delete the previous character To enter text To exit to the main menu

Deleting numbers

To delete 1 entry: 1. Touch 2. Touch 3. Touch 4. Use. or. or to select DELETE RECORD. or alphabetic search to select the entry you wish to delete.
5. Touch 6. Touch 1. Touch 2. Touch delete. 3. Touch 4. Touch 1. Touch 2. Touch 3. Use 4. Touch. and to select DELETE ALL. to confirm,''DELETE ALL?" shows on screen. and. to confirm delete. or alphabetic search to select the entry you wish to to confirm selection, ''DELETE ?'' shows on screen. to confirm delete.

To delete all entries:

5. Touch again to delete all.

Editing numbers

1. Touch 2. Touch 3. Touch 4. Use 5. Touch 6. Touch . and. and
or alphabetic search to select the entry you wish to edit. to select EDIT RECORD.

to confirm. key to delete characters and then use 0- 9 keys to re-enter the
to confirm.If the name does not need to be modified, touch name, touch to edit the number.
7. Use 0 - 9 keys and key to edit the number,Touch or to move the cursor left or right to edit the number. 8. Touch to confirm.

Calling stored numbers

1. Touch 2. Touch OR . and to scroll to the entry you wish to dial.
Touch the 1 - 9 key corresponding to the 1st letter of the entry and use and to select name you are seeking; for example names beginning with R touch 7 three times.The first location that begins with the letter you entered appears. to dial.

3. Touch

CALLER ID DISPLAY
You must subscribe to Caller ID service through you local telephone company to use these feature.If a caller number matches one of the number in the phonebook, the display will show the name information in the stored memory even if the incoming call does not have the name. NOTE: Check with your local telephone company regarding name service.
Caller ID with call waiting
When you subscribe to Caller ID with Call Waiting service from your telephone company, you are able to see who is calling when you hear the Call Waiting beep. Caller identification information appears on screen after you hear the beep. Touch key to put the current call on hold so that you can answer the incoming call. To return to the first call, touch again.

Call log

The incoming caller information transmitted from the telephone company is received by your phone between the first and second ring and stored in the Call log. If you answer a call before the second ring the caller information may not be stored. When the Call log memory is full, a new call automatically replaces the oldest call in memory.

CALLER ID DISPLAY

Viewing / calling Caller ID records
The call log records the caller name, number and the date / time for the previous 40 calls. To view the call log: 1. Touch or to enter the call log during standby mode. The number of new and total calls will be displayed. or to review individual call details. 2. Use NOTE: The call record is updated in ascending order. The most recent call will be assigned the highest number in the call log. To dial the reviewed number: 1. Use 2. Touch OR or to scroll to the desired Caller ID entry. to call back.

Missed calls

If you miss a call, ' MISSED CALL' will appear on screen during standby mode. To view your missed calls use and to enter and browse the call log (see Viewing / calling caller ID records page 20). After you reviewed the call log, ' MISSED CALL ' will disappear. When you view the Caller ID of your missed calls the following notifications will appear: NEW indicates that the calls have not been reviewed. REPT indicates that you have received repeat calls from this same number.

Message waiting

If you subscribe to a Voice Mail service offered by your local telephone company, the phone alerts you when a voice mail message has been received. will appear on the screen and the backlight will flash. The base unit LED will flash. will disappear and the LED will stop flashing automatically once NOTE: all messages have been checked and deleted. NOTE: You must subscribe to this service from your local telephone company. To manually clear the message waiting indicators: and select the SECURITY SET menu and then the CLEAR MSG 1. Touch WAIT submenu. 2. Use 3. Touch or to select YES. to confirm.

HANDSET SETTING

Navigate handset menus
KEY FUNCTION To scroll up through current menu and submenu To scroll down through current menu and submenu To confirm selection To exit to previous menu To exit and return to standby mode
How to navigate menus: During Standby mode 1. Touch to enter a menu or submenu. to select the setting or menu. indicates selected menu to exit to the and 2. Use or setting.
3. Touch to confirm or select the next menu. Use previous menu.
TIP You cannot enter the menu if you are making a call or have pre-dialed any part of a phone number. When you have changed a setting the handset will beep and exit the menu.

List of submenus:

Standby Language Ring Setting Ringer Volume External Call Internal Call Ringer Tone External Call Internal Call Set Time Clock Setting Enter Time Alarm Off On Enter Time Display Format 12/24hr MM/DD or DD/MM Phone Setup Set Area Code Set Contrast Key Tone Auto Answer Baby Call Off On Enter Number Dial Mode Flash Time Handset Name BackLight Time Security Set Registration Deregistration Clear Msg Wait Select Base Set Default

Change display settings

The handset can display information in English, Spanish, French, Portuguese, Italian, Dutch, German, Danish, Swedish, Norwegian and Finnish. To c hange language: 1. Touch 2. Use 3. Touch and select Language submenu. and to select desired language. to confirm.
To adjust screen contrast: and select the PHONE SETUP menu and then the SET 1. Touch CONTRAST submenu. 2. Use or to change contrast. 3. Touch to confirm. To alter backlight time: and select the PHONE SETUP menu and then the BACKLIGHT 1. Touch TIME submenu. or 2. Use seconds). to change selected backlight time (20, 30, 40, 50 or 60

to confirm. 3. Touch

To assign a name to a handset
1. Touch and select the PHONE SETUP menu and then the HANDSET NAME submenu. 2. Use 1-9 keys to enter a name. (see TO INPUT NAMES Page 16) 3. Touch to confirm.
Change ring and key tones
There is a choice of 10 polyphonic ring melodies and 4 ring tones. You can also choose from 4 key tones. To adjust ring volume: and select the RING SETTING menu and then the RING 1. Touch VOLUME submenu. 2. Use 3. Use 4. Touch NOTE: or or to select ' EXTERNAL CALL ' or ' INTERNAL CALL '. Touch to select volume level. (Select OFF to silence the ring tone). to confirm. will appear to indicate external ring tone is silenced if OFF is to confirm.
selected. To adjust ring tone: and select the RING SETTING menu and then the RING TONE 1. Touch submenu. 2. Use or to select ' EXTERNAL CALL ' or ' INTERNAL CALL '. Touch to confirm. 3. Use or to select ring tone. 4. Touch to confirm. To adjust key tone: and select the PHONE SETUP menu and then the KEY TONE 1. Touch submenu. 2. Use and to select key tone. 3. Touch to confirm.

Handset reception

Interference from other electrical appliances such as televisions,microwave oven or computer should be avoided. If you are out of range or the signal is interrupted will disappear and OUT OF RANGE will be displayed. NOTE: Due to radio interference occasional loss of synchronization between the handset and base unit may occur. If this happens the base unit will very quickly switch to another channel automatically to restore synchronization.

HANDSET SPECIAL FEATURES

In addition to the basic functions, your handset also has a number of special features.

Phone setup

To set the dial mode: If you have Touch-Tone service, do nothing as your phone has been set to Tone prior to shipment. If you do not know which type of service you have, contact your local telephone company. and select the PHONE SETUP menu and then the DIAL MODE 1. Touch submenu. 2. Use or to select PULSE or TONE. 3. Touch to confirm. To change flash time: 1. Touch and select the PHONE SETUP menu and then the FLASH TIME submenu. 2. Use or to change selected flash time (100, 270, 300 or 600ms). 3. Touch to confirm.
Smart key lock and manual key lock
Smart Key Lock prevents the accidental activation of keys during a call. A sensor inside the top of handset where the receiver is located senses when your ear touches the receiver and automatically locks the keypad. To ensure the Smart Key Lock function is activated, make sure to place the handset receiver to your ear first before speaking into the handset microphone and avoid touching the keypad with your fingers until the handset receiver rests on your ear. Smart Key Lock will disengage as soon as you remove the handset receiver from your ear. A manual key lock can also be activated to prevent the accidental triggering of keys during standby mode or sleep mode. To activate / deactivate manual key lock: then immediately touch. will appear to In standby mode touch then indicate key lock is activated. To deactivate manual key lock, touch. immediately NOTE: key functions and the emergency When the keypad is locked, Only the call (911) can be made, enter the emergency number and touch directly.

When the keypad is locked, you will still be able to answer incoming calls, once the call has ended the keypad will remain locked.

Area code

To set area code: and select the PHONE SETUP menu and then the SET AREA 1. Touch CODE submenu. 2. Use 0- 9 to enter your 3-digit area code.

Baby call

Baby call allows you to set a number to automatically dial when any key (apart from ) is touched. To set baby call: and select the PHONE SETUP menu and then the BABY CALL 1. Touch submenu. 2. Use 3. Touch and to select ON. to delete numbers if an to confirm.

to confirm.

4. Use 0 - 9 to enter the baby call number. Touch error is made.
to confirm. 5. Touch If you want to dial other numbers you will need to switch baby call off.To deactivate baby call repeat steps 1 to 3, selecting OFF instead of ON.

Auto answer

When the AUTO ANSWER is set to ON, simply remove the handset from the cradle and the phone automatically answers the call. To set auto answer: and select the PHONE SETUP menu and then the AUTO 1. Touch ANSWER submenu. 2. Use or to select ON or OFF. 3. Touch to confirm.

Clock and alarm setting

If you subscribe to Caller ID service from your local telephone company, the time will be updated automatically when received a call. If you do not subscribe to Caller ID service, you will need to set the time manually. To set the time: and select the SET TIME menu and then the CLOCK SETTING 1. Touch submenu. or to 2. Use 0 - 9 to enter the time. If you make a wrong enter, use to toggle AM / move the cursor to the incorrect digit and re-enter.(Use PM if 12 hour display format is selected). to confirm. 3. Touch To change time display format 1. Touch and select the SET TIME menu and then the DISPLAY FORMAT submenu. 2. Use 3. Touch 4. Use 5. Touch 1. Touch 2. Use or or or to select 12 / 24 hour format. to confirm. to select day-month format 'MM/DD' or ' DD/MM'. to confirm. and select the SET TIME menu and then the ALARM submenu. to select ON.

To set the alarm

3. Touch to confirm. 4. Use 0 - 9 to enter alarm time. to confirm. 5. Touch To switch the alarm to off, repeat steps 1-3, selecting 'OFF' instead of ' ON'. NOTE: indicates alarm is set. When the reminder occurs, your phone will ring. To stop alarm tone, simply touch the keypad. If the keypad is not touched, alarm will ring for 1 minute and then automatically turn off. If the alarm is activated during a call, you will hear two alarm tone and alarm icon flashes.

MULTI HANDSETS FUNCTIONS

If you have more than one handset, you can enjoy an intercom call between handsets. You can also establish a conference call (between two handsets and outside).

Registration

The handset and base unit are factory pre-registered with each other. Therefore, the unit should be in full working order out of the box. When you purchase an additional handset, you have to register it to the base unit in order to make and answer calls. You can register up to 3 more handsets to make and answer calls via the same base unit. Handsets are numbered 1 to 4. If your handset is not registered to the base "NOT REGISTERED" will display on the handset. The handset must first be registered to the base to be used. To register a new handset: and select the SECURITY SET menu and then the 1. Touch REGISTRATION submenu. 2. Use 3. Touch or to select the base number you wish to register to. to confirm.

4. Enter the 4 digit PIN code (default 0000) and touch , you will see the message: 'REGISTERING'. 5. Press and hold the PAGE key on the base until the Charge/In use LED flashes. 6. REGISTRATION ACCEPTED indicates that handset is registered. RETRY? indicates that registration has failed. Touch to retry or to quit. To select a base unit on your handset: Your telephone supports up to 4 base units. After you register 1 handset to 4 base units, bases are numbered 1 to 4, you may select which one to use. 1. Touch and select the SECURITY SET menu and then the SELECT BASE submenu. or to select the base number or AUTO (automatically selects 2. Use the nearest base). to confirm. 3. Touch 4. ACCEPTED indicates that base has been selected. RETRY? indicates to retry or to quit. that selection has failed. Touch
To de-register a handset: and select the SECURITY SET menu and then the 1. Touch DEREGISTRATION submenu. or to select the handset number for de-registration. 2. Use 3. Touch to confirm. Wait for handset to de-register from the base unit. 4. DEREGISTRATION ACCEPTED indicates that handset is de-registered. To make an internal call: 1. Touch 2. Use or to select the handset you wish to call and touch handset number directly. or enter
to answer the call. If you turn 3. The called handset rings and can touch AUTO ANSWER on, simply pick up the handset from the cradle. 4. To end the call, touch on either handset. NOTE: If an external call is received during an internal call, you will hear a ringer tone from the receiver. Touch to termnate the internal call and touch to answer the external call. If the called handset does not answer within two minutes, the operation is canceled. If the called handset is out of range, the calling handset return to standby mode. To transfer an external call: during a call. 1. Touch 2. Use or to select a handset you wish to call and touch or enter the handset number directly. If the selected handset is not available or the called handset does not answer the call within 2 minutes, will return to the external call automatically. NOTE: To cancel the transfer, touct on the calling handset, will return to the external call. 3. The called handset can touch to answer. If you turn AUTO ANSWER on, simply pick up the handset from the cradle. on the NOTE: To toggle between the internal and external call, touch calling handset. 4. To transfer the call, touch on the calling handset or place the handset in the cradle.

To establish a conference call: The phone permits 3-way conversations between 2 handsets and an outside line. 1. During an external call, touch 2. Use or to select a handset you wish to call and touch or enter the handset number directly. 3. The called handset can touch to answer. If you turn AUTO ANSWER on, simply pick up the handset from the cradle. 4. The calling handset can touch to start the conference call, 'CONFERENCE CALL' shows on screen. 5. Touch key on either handset to finish the conference call. The connection will remain between the remaining handset and the external line. RESET To reset the handset default settings: 1. Touch 2. Use 3. Touch and select the Set Default menu. and to select YES. to confirm.
NOTE: All the settings you have made will be restored to the default factory settings if you reset.

DEFAULT SETTINGS

SETTING Language Internal & External Ring Volume External Ring Tone Internal Ring Tone Alarm DEFAULT VALUE English 3 Ring Tone 3 Tone 1 Off
Alarm time12:00AM Display format12-hour Month-Date display format Key Click Tone Smart Key lock Auto Answer Baby call Baby call number Dial Tone Flash Time Handset Name Backlight Time Handset volume Speaker phone volume Set contrast MM / DD Pattern 2 On Off Off Clear Tone Dial 600ms Clear 60 seconds Vol. 1 Vol. 3 8
Area Code clear TROUBLESHOOTING See below for some common problems and their remedies. Whatever the problem, you should first check that: The base unit is connected to the power supply and phone line. The main power is switched on at the socket. The handset battery is installed and has not run out of power. DO NOT attempt any repairs yourself. This will invalidate your warranty.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSES / REMEDIES Out of range of base unit- move your handset closer to the base unit. Interference due to environment- position base unit to reduce interference (move base unit away from other electrical appliances.). De-synchronization has occurred. The base unit will reset synchronization automatically. Handset may not be registered to base unit (see REGISTRATION section Page 30). Ensure unit is not in cradle. Return to standby mode by pressing Phone is in Baby Call mode. To deactivate see BABY CALL section page 28. Check your network subscription to Caller ID. Full name and number (incl. STD code) need to be stored in phonebook for name display. Ring Volume OFF (see CHANGE RING AND KEY TONES section page 26). Make sure that your ear is touching the top section of the handset (receiver) when you are talking. Batteries may need to be replaced. A maximum of 4 units can be registered at time. De-register a handset and try again. Make sure you select a base number that has not been assigned. Only one external call and one internal can take place at once. Make sure no other handset is making a call. Cant make a call / OUT OF RANGE appears on the handset. Cant enter the submenus. Every button I press calls a preset number. Caller ID is not displayed. Handset does not ring. When Im talking on the phone I keep activating other keys. Batteries are low, even if recharged. I cant register my new one handset. I cant make an internal call.

3. INTERFERENCE

CAUTION
This product is intended for use in the USA and CANADA only. Sale or use in other countries may violate local laws. Cordless telephones use radio frequencies to allow mobility. This affects the performance of your phone.

1. NOISE

Electrical pulse noise is present in most homes at one time or another. This is most intense during electrical storms. Certain kinds of electrical equipment, such as light dimmers, fluorescent bulbs, motors, fans, etc., also generate pulse noise. Because radio frequencies are susceptible to this, you may on occasion hear pulse noise through
Electronic circuits activate a relay to connect the unit to your telephone line. These electronic circuits operate in the radio frequency spectrum. While several protection circuits are used to prevent unwanted signals, there may be periods when these unwanted signals enter the base station. You may hear a click or hear the relay activate when you are not using the cordless handset. If this occurs frequently, or relocating the base station. 4. RADIO EQUIPMENT The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions (as set by Industry Canada): (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device. with single-line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request that the user disconnect the equipment. The user should ensure for his own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

NOTICE:

Cordless telephones are radio devices. Communications between the handset and base of your cordless telephone are accomplished by means of radio waves which are broadcast over the open airways. Because of the inherent physical properties of radio waves, your communications can be received by radio receiving devices other than your own cordless telephone unit. Consequently, any communications using your cordless telephone may not be private. The Industry Canada Label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The ministry does not guarantee that the equipment will operate to the users satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of construction. In some cases, the companys inside wiring associated

Users should not attempt to make such connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product. This symbol on the product is used to identify the following important information. Use only with specified SANYO power adaptor. NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. This Class B digital apparatus complies with Canadian ICES-003.

SANYO COMFORT WARRANTY

WARRANTY APPLICATION
SANYO Communications products purchased new, unused in Canada through a SANYO Authorized Dealer are warranted against manufacturing defects in materials and workmanship for ONE YEAR covering parts and labour, from the date of purchase by the original retail purchaser. This warranty only applies in favour of the original retail purchaser of the warranted product. purchased outside Canada. b.Communications products purchased in a used condition. c.Communications products purchased from non SANYO authorized dealer. d.Communications products not intended for Canadian usage or products without appropriate Canadian regulatory approvals. e.Problem due to product set-up and installation. f. Adjustments that are outlined in the Operating Manual. g.Accessory items including antenna and batteries. h.Damage in or due to transportation. i. Damage due to improper maintenance, accident, abuse, misuse or negligence. j. Damage caused by lightning and power surges.
SANYO CANADA INC.S RESPONSIBILITY
During the warranty period, SANYO Canada Inc. will repair, or at our option, replace a Communications product which shows evidence of a manufacturing defect in materials or workmanship. Replacement PARTS are warranted for the remaining portion of the warranty period.

WHAT IS NOT COVERED

a.Communications products
ORIGINAL RETAIL PURCHASERS RESPONSIBILITY
You, the original retail purchaser, must present your original, dated bill-of-sale together with this warranty to SANYO Canada Inc. or to an authorized SANYO Service Depot when you make a claim under this warranty. You, the original retail purchaser, are responsible for any costs of TRANSPORTING the product to and from SANYO Canada Inc. or an authorized SANYO Service Depot. You also are responsible for the cost of any MAINTENANCE necessary in respect of the product. b.In no event shall SANYO Canada Inc. or any of its Authorized Dealers be liable for special or consequential damage arising from the use of this product.

STATUTORY WARRANTIES

The above provisions do not preclude the operation of any applicable provincial statute which in certain circumstances may not allow some of the limitations and exclusions described in this warranty. Where any terms of this warranty are prohibited by such a statute, they shall be deemed null and void but the remainder of this warranty shall remain in effect.

WARRANTY BECOMES VOID

This warranty becomes void if the products serial numbers are altered or removed or if any repair to the product is made other than by SANYO Canada Inc. or by an authorized SANYO Service Depot.
HOW TO OBTAIN WARRANTY SERVICE
Please contact the SANYO Authorized Dealer from whom the product was purchased, or contact us directly at: SANYO Canada Inc. 1-300 Applewood Cres. Concord, Ont. L4K 5C7 (905) 760-9944 1-800-263-2244

LIMITATIONS

a. SANYO Canada Inc. reserves the right to change or improve the design of the model of the product warranted hereunder without incurring any obligation to make any modifications to or to install any improvement in or on the product.

SOS HELP LINE

At SANYO, fulfilling the needs of our customers is a priority. Thats why we created our SOS customer service program that guarantees satisfaction.
NATIONWIDE CUSTOMER SUPPORT
SOS is there to help you. Our friendly and knowledgeable product specialists will quickly answer your questions about setup and use of SANYO telephone products. Simply call toll free from anywhere in Canada to connect to our no-charge, SOS support and service network:
Or visit our website at www.sanyoservice.com, and click the Customer Relations button to get access to our FAQs (Frequently Asked Questions) and other helpful features.

1-800-263-2244

STAY-AT-HOME CONVENIENCE
Its a nuisance making another trip to the store when youre stuck. Now with SOS, all thats necessary is a quick call for your home for product assistance.

HASSLE-FREE EXCHANGE

Should your SANYO telephone require servicing due to a manufacturing defect during the warranty period. SANYO Canada will ship prepaid a replacement unit* within two business days after receiving your defective unit. Consumers are responsible for the shipping costs of the unit back to SANYO. For older, non-current models, replacement units may not be available, in which case our regular warranty conditions will apply.

CORDLESS PHONE BATTERY CROSS REFERENCE CHART
Cordless Phone Model # HT-2231 HT-3400 HT-4100 HT-4200 HT-4210 HT-4400 HT-4410 HT-5200 HT-5210 HT-5300 HT-5310 HT-5320 HT-5500 HT-6000 HT-7000 Merlin MCL-5 Nomad 3000 Nomad 4000A DST-961 DT-911 DT-921 DT-931 DT-941 DT-MH-9012 MH-9934BK CP1218 CP1240 CP530 TC510 Chemistry Voltage Capacity 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 2.4 V 2.4 V 2.4 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V
Phone Brand AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T AT&T Audiovox Audiovox Audiovox Audiovox Audiovox Audiovox Bell South Bell South Bell South Casio Casio Casio Casio

Page 1 of 14

OEM Battery Model # NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiMH NiMH NiMH NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd
V-Tech 5017 V-Tech 5017 V-Tech 5017

BT905 BT3210101

300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 600 mAh 600 mAh 1500mAh 1500mAh 1500mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 1000 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 700 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh
Electrohome Battery Model # ETA246 ETA246 ETA246 ETA246 ETA246 ETA276 ETA276 ETA5017 ETA5017 ETA5017 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA288 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA276 ETA276 ETA276 ETA276 ETA247 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA275 ETA275 ETA275 ETA277 ETA277 ETA246 ETA246

Jan 2006

Cordless Phone Model # TC540 TC725 TC920 CT205 CT2005 213-001-9-001 213-0090-9001 213-009-9001 213-010-9-001 213-021-N-001 523-548-9-001 CP100SA CP110 CP110SA CP115S CP115SA CP120 CP120SA CP130 CP130SA CP140 CP140R CP140S CP140SA CP205SA CP210 CP210RA CP210S CP220 CP220S CP220S CP250CM CP250S CP301S CP302 CP302S CP310 CP310S CP320 CP320S CP330 CP355 CP355S CP440 CP440S CP443 CP443S CP445 CP445S CP447 CP-447S CP450 CP450S CP460 CP460S CP464 CP464S CP468 CP468S CP469 CP469S CP470 CP470S CP471 CP471S CP472 CP472S CP473 CP473S CP474 CP474S CP475 CP475S CP477S CP478 CP478S CP481 CP482 CP482S Chemistry Voltage Capacity 3.6 V 3.6 V 3.6 V 3.6V 3.6V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V

Page 7 of 14

Cordless Phone Model # KX-TG2730 KX-TG2770 KX-TG5100 KX-TG5421S KX-TG5422M KX-TG5431S KX-TG5432M KX-TGA100N KX-TGA2705 KX-TGM240B TX-T3800 TX-T3805 TX-T3815 TX-T3823 TX-T3824 TX-T3850 TX-T3860 TX-T3880 TX-T3910 TX-T3920 TX-T3960 TX-T3980 TX-T4200 TX-T4300 TX-T4350 TX-T4350R TX-T4370 TX-T4400 TD9213 TD9240 TD9241 TD9242 TD9245 TD9246 TD9273 TD9603 TD9614 TD9673 TD9841 TD9844 PMP3850 PMP38560 PMP3875 43-1128 43-1129 43-1130 43-1702 43-1703 43-3512 43-3807 43-3810 43-564 43-681 43-683 43-684 43-686 43-725 43-729 43-CAS1200 CAS125 CAS130 CAS1300 CAS13600 CAS1500 CAS160 CAS170 CAS1700 CAS300 CAS8371 CAS8871 CLT-1300 CLT-1561 Chemistry Voltage Capacity 3.6V 3.6V 3.6V 3.6V 3.6V 3.6V 3.6V 2.4 V 3.6V 3.6V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V
Phone Brand Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Panasonic Philips Philips Philips Philips Philips Philips Philips Philips Philips Philips Philips Philips PhoneMate PhoneMate PhoneMate RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack RadioShack Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo
OEM Battery Model # P-P511A P-P511A P-P511A HHRP104 HHRP104 HHRP104 HHRP104 HHR-P546PA P-P511A HHR-P505PA NiMH NIMH NIMH NIMH NIMH NIMH NIMH NiMH NiMH NIMH NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiMH NiMH NiMH NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd
Electrohome Battery Model # 1500mAh 1500mah 1500mah 850mAH 850mAH 850mAH 850mAH 1500mAh 1500mAh 1000mAH 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 600mAh 600mAh 600mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh ETA511 ETA511 ETA511 ETA504 ** ETA504 ** ETA504 ** ETA504 ** ETA5017 ETA511 ETA288 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA246 ETA538 ** ETA538 ** ETA538 ** ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA248 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242

Electrohome Battery Model # 300 mAh 300 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 600 mAh 600 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh ETA242 ETA242 ETA242 ETA242 ETA275 ETA275 ETA275 ETA275 ETA275 ETA596 ETA275 ETA275 ETA275 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA242 ETA248 ETA242 ETA242 ETA242 ETA275 ETA275 ETA275 ETA275 ETA275 ETA242 ETA275 ETA275 ETA242 ETA242 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275 ETA275

Page 9 of 14

Cordless Phone Model # CLT-9950C CLT-9960 CLT-9965C CLT-A901 CLT-A9011 CLYT-33 CP-3F01 GES-PCF01 H02 PCFSPP-116 SPP-121 SPP-15 SPP-160 SPP-180 SPP-206 SPP-320 SPP-400 SPP-5100 SPP-57 SPP-60 SPP-72 SPP-75 SPP-77 SPP-85 SPP-910 SPP-930 SPP-933 SPP-934 SPP-936 SPP-95 SPP-97 SPP-A11 SPP-A20 SPP-A40 SPP-A400 SPP-A50 SPP-A57 SPP-A700 SPP-A9171 SPP-A941 SPP-A946 SPP-A968 SPP-A974 SPP-A985 SPP-D900 SPP-ID300 SPP-ID400 SPP-ID700 SPP-ID910 SPP-ID930 SPP-ID971 SPP-ID976 SPP-IM977 SPP-IM982 SPP-N1001 SPP-N1021 SPP-N1026 SPP-Q110 SPP-Q120 SPP-Q150 SPP-S9001 SPP-S9101 SPP-S9226 SPP-X9001 FF-1150 FF-1175 FF-1700 FF-1725 FF-1750 FF-650 FF-675 Chemistry Voltage Capacity 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 4.0 V 4.0 V 4.0 V 4.0 V 4.0 V 3.6 V 4.0 V 3.6 V 4.0 V 3.6 V 3.6 V 3.6 V 4.0 V 4.0 V 4.0 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 4.0 V 4.0 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 2.4 V 2.4 V 2.4 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 4.0 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V
Phone Brand Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sanyo Sears Sears Sears Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony S'Western Bell S'Western Bell S'Western Bell S'Western Bell S'Western Bell S'Western Bell S'Western Bell

OEM Battery Model # GES-PCF-01 GES-PCF-01 GES-PCF-01 GES-PCF-01 GES-PCF-01 GES-PCH-01 NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd SLA SLA SLA SLA SLA NiCd NiCd NiCd NiCd NiCd NiCd NiCd SLA SLA NiCd NiCd NiCd NiCd NiCd NiCd SLA SLA NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiMH NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiMh SLA NiCd NiCd NiCd NiCd NiCd NiCd NiCd
Electrohome Battery Model # 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 600 mAh 600 mAh 300 mAh 600 mAh 300 mAh 300 mAh 300 mAh 500 mAh 500 mAh 500 mAh 500 mAh 500 mAh 300 mAh 500 mAh 300 mAh 500 mAh 300 mAh 300 mAh 300 mAh 500 mAh 500 mAh 500 mAh 600 mAh 600 mAh 300 mAh 600 mAh 600 mAh 500 mAh 500 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 1150 mAh 600 mAh 600 mAh 300 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh 300 mAh 600 mAh 600 mAh 1150 mAh 500mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh ETA275 ETA275 ETA275 ETA275 ETA275 ETA242 ETA275 ETA275 ETA248 ETA275 ETA246 ETA246 ETA246 ETA250 ETA250 ETA250 ETA250 ETA250 ETA248 ETA250 ETA248 ETA250 ETA248 ETA248 ETA248 ETA250 ETA250 ETA250 ETA272 ETA272 ETA248 ETA277 ETA272 ETA250 ETA250 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA263 ** ETA277 ETA272 ETA578 ETA272 ETA272 ETA248 ETA248 ETA248 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA279 ** ETA279 ** ETA279 ** ETA248 ETA248 ETA248 ETA263 ** ETA263 ** ETA578 ETA250 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248
BP-T40 BP-T40 BP-T40 BP-T40 BP-T40 BP-T16 BP-T40 BP-T16 BP-T40 BP-T16 BP-T16 BP-T16 BP-T40 BP-T40 BP-T23 BP-T18 BP-T23 BP-T40 BP-T40 BP-T16 BP-T16 BP-T16 BP-T16 BP-T16 BP-T16 BP-T16 BP-T16 BP-T31 BP-T18 BP-T23 BP-T24 BP-T23 BP-T16 BP-T16 BP-T16 BP-T23 BP-T23 BP-T23 BP-T23
BP-T50 BP-T50 BP-T50 BP-T16 BP-T16 BP-T16 BP-T31 BP-T31 BP-T24 BP-T40

Page 10 of 14

Cordless Phone Model # FF-700 FF-905 FF-908 FF-915 FF-925 TP/3AAAT-W FD-9859BK FT-6003 FT-6005 FT-6203 FT-6503 FT-6603 FT-7106 FT-8000 FT-8006 FT-8009 FT-8258BK FT-8505BK FT-8508BK FT-8808BK FT-8809 FT-888 FT-8908 FT-8930 FT-8958BK FT-8980 FT-8981 SG-1700 SX2258 SX2800 SX2808BK SX2930 SX2980 AE-255 AM-468V AM46EV AM-46EV BT-999 CT-301 DX-8200 DX834 DXAI388-2 DXI3286 DXI386-2 DXI665 DXI665S ESX2050 EX17960 EX2100 EX3100 EX3101 EX3102 EX3182 EX3800 EX3810 EX4100 EX4101 EX4102 EX4800 EXA13248A EXA1915 EXA1918 EXA2245 EXA2850 EXA2950 EXA2955 EXA3245 EXA3955 EXA6950 EXA7950 EXA8955 EXAI2246 EXAI2248 EXAI2248i EXAI2980 Chemistry Voltage Capacity 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V

Phone Brand S'Western Bell S'Western Bell S'Western Bell S'Western Bell S'Western Bell Telepower Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Toshiba Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden Uniden
OEM Battery Model # NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd
BT185 BT185 BT185 BT185 BT185 BT905 BT905 BT905 BT185 BT185 BT905 BT905
BT905 BT905 BT905 BT905 BT905 BT905 BT905 BT905 BT905 BT905 BT905 BT905 BT905 BT905 BT905 BT905
300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 600 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh 300 mAh 600 mAh 300 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh
Electrohome Battery Model # ETA248 ETA275 ETA275 ETA275 ETA275 ETA275 ETA277 ETA248 ETA242 ETA242 ETA242 ETA242 ETA242 ETA277 ETA242 ETA274 ETA274 ETA274 ETA274 ETA274 ETA274 ETA274 ETA274 ETA277 ETA274 ETA277 ETA277 ETA277 ETA274 ETA277 ETA274 ETA277 ETA277 ETA277 ETA248 ETA248 ETA248 ETA272 ETA248 ETA248 ETA248 ETA277 ETA277 ETA277 ETA248 ETA248 ETA277 ETA277 ETA277 ETA275 ETA277 ETA277 ETA275 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277

Electrohome Battery Model # 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 800mAh 800mAh 800mAh 800mAh 800mAh 800mAh 800mAh 800mAh 800mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 300 mAh 600 mAh 300 mAh 600mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600mAh 300 mAh 300 mAh 600mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh ETA272 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA277 ETA5446 ETA5446 ETA5446 ETA5446 ETA5446 ETA5446 ETA5446 ETA5446 ETA5446 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA248 ETA275 ETA246 ETA246 ETA246 ETA246 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA246 ETA246 ETA246 ETA246 ETA272 ETA571 ** ETA571 ** ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272

Page 13 of 14

Cordless Phone Model # VT-1922 VT-1922c VT-1923 VT-1930 VT-1930c VT-1932 VT-1940 VT-1951 VT1961 VT-1962 VT1970 VT-1970c VT-1970ci VT-20-2420 VT-20-2431 VT-2400 VT-2418 VT-2420 VT-2421 VT-24-2481 VT-2426 VT-2428 VT-2430 VT-2431 VT-2460 VT-2461 VT-2468 VT-2498 VT-2528 VT-2910 VT-2910C VT-2910C VT-2920 VT-2931 VT-2932 VT-2950ci VT-2960 VT-2961 VT-2962 VT-5820 VT-5831 VT-9000 VT-9060 VT-9060I VT-9105 VT-9108 VT-9109 VT-9110 VT-9111 VT-9112 VT-9113 VT-9115 VT-9116 VT-9117 VT-9118 VT-9119 VT-9121 VT-9122 VT-9123 VT-9126 VT-9127 VT-9140 VT-9141 VT-9151 VT-9152 VT-9155 VT-9161 VT-9162 VT-9171 VT-919AD VT-9241 Chemistry Voltage Capacity 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 2.4 V 2.4 V 2.4 V 3.6 V 2.4 V 2.4 V 2.4 V 3.6 V 3.6 V 2.4 V 2.4V 2.4 V 2.4V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 2.4V 2.4V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V
Phone Brand V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech V-Tech
OEM Battery Model # 80-5074-00-00 80-4280-00-00 80-4280-00-00 80-4032-00-00 80-4280-00-00 80-4280-00-00 80-4280-00-00 80-4032-00-00 80-4280-00-00 80-4032-00-00 80-4280-00-00 80-4280-00-00 80-5017-00-00 80-5017-00-00 80-5017-00-00 80-5074-00-00 80-5017-00-00 80-5017-00-00 80-5017-00-00 80-5074-00-00 80-5074-00-00 80-5017-00-00 80-5017-00-00 80-5017-00-00 80-5017-00-00 80-5071-00-00 80-5074-00-00 80-5074-00-00 80-4032-00-00 80-4032-00-00 80-4280-00-00 80-4032-00-00 80-4280-00-00 80-4280-00-00 80-4032-00-00 80-4032-00-00 80-4280-00-00 80-4280-00-00 80-5017-00-00 80-5017-00-00 80-4032-00-00 80-4032-00-00 80-4280-00-00 80-4280-00-00 80-4280-00-00 80-5071-00-00 80-5074-00-00 80-4280-00-00 80-4280-00-00 80-5074-00-00 80-4280-00-00 80-5038-00-00 80-5038-00-00 80-5074-00-00 80-5074-00-00 80-4280-00-00 80-5038-00-00 80-5074-00-00 80-5074-00-00 80-5074-00-00 80-4032-00-00 80-4280-00-00 80-4280-00-00 80-5074-00-00 80-4280-00-00 80-5074-00-00 80-4280-00-00 80-4280-00-00 80-4032-00-00 80-4280-00-00 NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiMH NiMH NiMH NiCd NiMH NiMH NiMH NiCd NiCd NiMH NiMH NiMH NiMH NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiMH NiMH NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd NiCd

Electrohome Battery Model # 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 1500mAh 1500mAh 1500mAh 300 mAh 1500mAh 1500mAh 1500mAh 300 mAh 300 mAh 1500mAh 1500mAh 1500mAh 1500mAh 600 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 1500mAh 1500mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh 600 mAh 600 mAh 300 mAh 300 mAh 600 mAh 600 mAh 600 mAh ETA246 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA5017 ETA5017 ETA5017 ETA246 ETA5017 ETA5017 ETA5017 ETA246 ETA246 ETA5017 ETA5017 ETA5017 ETA5017 ETA276 ETA246 ETA246 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA272 ETA5017 ETA5017 ETA272 ETA272 ETA272 ETA272 ETA272 ETA246 ETA246 ETA272 ETA272 ETA246 ETA272 ETA246 ETA246 ETA246 ETA246 ETA272 ETA246 ETA246 ETA246 ETA246 ETA272 ETA272 ETA272 ETA246 ETA272 ETA246 ETA246 ETA272 ETA272 ETA272
** These batteries are available as a special order, please see department manager for further details

Page 14 of 14