k Do not use during a storm.
i To avoid the risk of electric shock, quickly turn off the printer and unplug the power cord from the power outlet.
k Do not place on an unstable surface.
i The printer may fall, resulting in damage to the printer or injury. i If the printer has fallen and its body is damaged, turn it off, unplug the power cord from the power outlet, and take it to the dealer for repair. Using the printer after its body has been damaged may cause a fire or electric shock.
DVP-P1_E.book Page 6 Wednesday, July 23, 2003

CAUTION

k Do not stand the printer on its side.
i The printer should be in its correct horizontal position when in use. i If the printer is operated while set on its side, the paper feed and/or discharge may not work properly and cause a malfunction.
k Do not use where there is risk of explosion.
i Do not use the printer in a location where there is explosive gas or any other flammable material in the air. Doing so may cause a fire or an explosion.
k Cautions when carrying the printer.
i Be careful not to drop the printer or subject it to strong shock or vibration. i Unplug the power cord from the power outlet, and disconnect any other equipment from the printer.
k If the printer is not going to be used for a long period of time.
i For safetys sake, unplug the power cord from the power outlet, and remove the ink ribbon and paper from the printer.
DVP-P1_E.book Page 7 Wednesday, July 23, 2003
k Cautions during use and storage.
i This printer is a precision instrument. When using or storing the printer, make sure to avoid the following locations to avoid damage. h Places in direct sunlight h Places where humidity and temperature are high h Places that may get wet h Places close to an air conditioner or heater h Inside a car h Places where there is dust and dirt h Places where there is a fire burning h Places where volatile products are stored h Places subject to vibration Operating environment: h For details about the optimum operating environment, please see Specifications on page 48.
k Do not obstruct the ventilation holes.
i Do not obstruct the ventilation holes, for example by placing the printer in a spot with poor ventilation, or covering it with a table cloth. If the ventilation holes are blocked, the inside of the printer may become overheated and cause a fire.
k Do not place heavy objects on top of the printer. i The printer may topple over and fall, possibly causing injury. In addition, a heavy object on the printer may damage it.
DVP-P1_E.book Page 8 Wednesday, July 23, 2003
k Do not remove the paper tray during printing.
i During printing, the paper is moving back and forth within the printer. If you attempt to touch the paper, it may result in injury. Do not touch the paper tray until printing is finished. Do not remove the paper tray and put your fingers or hands in the paper tray slot.

k Do not insert your fingers in the printer.
i Your fingers may be pinched or burned. Be especially careful with regard to this point when children are present.
DVP-P1_E.book Page 9 Wednesday, July 23, 2003
About the AC adapter CAUTION
k Make sure the rated voltage of AC adapter matches the line voltage in your area.
i Fire and/or electrocution could result from connecting the AC adapter to a line voltage other than that for which it is rated. DVP-P1EX: 220V to 240V DVP-P1U: 100V to 120V

V~120V 100 V~240V 2 200

k Do not damage the power cord.
i Do not put heavy objects on the power cord or place heat-producing appliances near it. Do not bend or modify the power cord, or use staples to affix it, as doing so may damage the power cord and cause a fire or electric shock. i If the power cord is damaged, consult with your dealer about obtaining a replacement cord.
k When moving the printer, disconnect the AC adapter.
i If you attempt to move the printer without disconnecting the AC adapter, the AC adapter or power cord may be damaged.
k Do not allow dust etc. to build up on the power cord or power outlet.
i A build up of dust may cause a short circuit or generate heat and cause a fire. i Take special care when the printer is used in a humid room, in a place where vapors are readily condensed, in the kitchen, or in a place where dust easily accumulates. i Periodically unplug the power cord from the power outlet, and remove any dust or dirt adhering between the prongs.
k Do not wrap the AC adapter in cloth or the like.
i If the AC adapter is wrapped in cloth, the resulting heat generated may cause a fire. Even when the printer is not being operated, the AC adapter generates some heat. For this reason, once the printer is set up, it should never be covered with a cloth or the like.

DVP-P1_E.book Page 10

k Caution when connecting the AC adapter.
i Securely plug the power cord all the way into the power outlet. If the power cord is not fully plugged in, heat may be generated and cause a fire. i Do not use a bundled power cord, as the heat generated may cause a fire. i When using an extension cord, make sure that the total wattage of the connected devices does not exceed the rated value of the extension cord. If the power load exceeds the rated value, it may cause a fire. Before using an extension cord with the printer, make sure to read all its accompanying instructions. i Do not leave the supplied AC adapters power cord plugged into the power outlet while the other end is not plugged into the printers power socket. The loose end can cause electrocution if touched with wet hands or if handled by children. i Use only the supplied power cord. If a different power cord is used, it may be rated for a different current load, and that may cause a fire. i The supplied AC adapter is for exclusive use with this printer. Do not use it with other devices, as doing so may cause a fire or electric shock.

k When unplugging the power cord, be sure to hold the power plug and slowly pull it out of the power outlet.
i Pulling the cord portion may damage the power cord and cause a fire or electric shock.
k Do not touch the power cord plug with wet hands, or you risk receiving an electric shock.

DVP-P1_E.book Page 11

CAUTION Other items
k Caution concerning the card.
i The card may be warm immediately after use. Before removing the card, turn off the power to the printer and wait for it to cool down. i Keep out of the reach of children. If the card is inserted incorrectly, it may cause an accident to occur.

DVP-P1_E.book Page 12

FOR CORRECT USE OF YOUR PRINTER

k Maintenance

i Cleaning 1 Turn off the power, and remove the power plug from the power outlet. 2 Use a soft cloth to gently wipe the printer clean. To remove stains 3 Moisten a cloth with a solution of water and a mild detergent. Wring the cloth out well before using it to wipe the printer. Follow by polishing with a soft, dry cloth. 4 Remove any dust from the ventilation holes on the front panel h Dust entering the printer from the ventilation holes will adhere to the prints and diminish their quality. i Caution h Never use benzine or thinner to clean the printer, as doing so may cause deformation or paint peeling. Also, before using a chemically treated dustcloth to clean the printer, make sure to read all accompanying instructions. h Do not allow pesticides or flammable substances to come into contact with the printer or paper tray. Also, do not allow rubber or vinyl objects to contact the printer for a long period. They may cause deformation, discoloration, or paint peeling.
k When not using the printer for a long period
h Remove the power cord. However, when the power is interrupted for a long time, the printer functions may begin to not work properly. Periodically turn on the printer and use it to maintain the functions.
k Caution concerning condensation
h Using the printer or card with condensation inside it may damage it. i If condensation seems likely to form h Place the printer in a plastic bag and seal it, and then wait until the printer has reached the ambient temperature. i Be careful of condensation under the following conditions h When moving the printer suddenly from a cold place to a warm place. h When the ambient temperature changes drastically, such as when a heater is turned on to quickly heat the room. h When the printer is placed in the path of cool air from an air conditioner. h When the printer is placed in a location of high humidity.

DVP-P1_E.book Page 13

k Caution concerning undesired interference
h The printer may create undesired interference if used close to a television or radio. To avoid this type of interference, make sure the cores on the supplied power cord and AC adapter are not removed.

DVP-P1_E.book Page 16

SEPARATELY SOLD ACCESSORIES
Postcard paper and ink ribbon (sets)
i Postcard paper and ink ribbon set (50 sheets) h A set of 50 postcards and one ink ribbon product number: DVP-P1EX: DVP-IPK50 DVP-P1U: DVP-IPK50U i Postcard paper and ink ribbon set (100 sheets) h A set of 100 postcards and one ink ribbon product number: DVP-P1EX: DVP-IPK100 DVP-P1U: DVP-IPK100U NOTE About the ink ribbon life i The ink ribbon that comes in a set can be used only for the number of sheets that comes in the set. It cannot be used to print more than the specified number.

DVP-P1_E.book Page 17

in d ex
SPECIAL FEATURES OF THE PRINTER
This printer is designed to print pictures taken with a digital camera, combining beautiful print results with easy-to-use operation. It also incorporates various useful functions for printing images on postcards and L size paper.
Beautiful and durable prints
i The dye sublimation printer uses an exclusive ink ribbon to produce beautiful prints that are highly resistant to UV light. The fade resistance is equal to that of standard lab-processed photo prints. i The exclusive print paper is water-resistant. Keep your prints clean by immediately and gently blotting any drops of water with a soft cloth, and they will not be damaged. i Postcards made exclusively for this printer are sold separately. In addition to standard options such as date imprinting and borderless printing, with this printer you can specify extra-sharp images. * The preservation of prints which have been saturated in water cannot be guaranteed.

DPOF compliant

i You can have your prints produced following the printing specifications (number of prints, date imprinting, index print) set within your digital camera.
Print from various types of memory cards
i Prints can be made directly from many of the various types of digital camera memory cards simply by inserting the card into the printer. i This printer is compatible with the following cards: h SD Memory Card h MultiMedia Card h CompactFlash h Microdrive h SmartMedia (3.3V) h Memory Stick (An adapter is required to use Memory Stick Duo.)
Direct prints from your digital camera (PictBridge)

Power indicator

POWER button

LCD monitor

CAUTION Do not turn off the printer while it is printing. i If the printer is turned off while it is in the middle of printing, the paper will stop moving and may cause a paper jam. Turn off the printer only after printing is completed. Use only the supplied AC adapter i To prevent damage to your printer, do not use an AC adapter other than the one supplied with the printer.

DVP-P1_E.book Page 22

INSTALL THE INK RIBBON
The ink ribbon is not supplied with this printer. Please purchase a separately sold postcard and ink ribbon set.

About the ink ribbon

i When installing the ink ribbon, do not touch the ribbon. If the ribbon is smudged with fingerprints or dirt, the resulting print quality may be inferior. i The guarantee term for the ink ribbon quality is as follows: Unopened ink ribbon stored in a dark place: Temperature 40C or lower. i The ink ribbon can print only the number of sheets that comes with it. i The number of prints is indicated on the ink ribbon. Ribbon
Number of prints indication
How to install the ink ribbon
Open the ink ribbon slot cover. Install the ink ribbon. 1 Turn the cassette spindle in the direction of the arrow to take up the ribbon slack. 2 Insert the ink ribbon into the ink ribbon slot from the direction indicated by the arrow. 2-2 h Firmly push it all the way in. 13 Close the ink ribbon slot cover.
CAUTION When printing is finished i Be sure to remove the ink ribbon from the printer.

DVP-P1_E.book Page 23

How to remove the ink ribbon
Open the ink ribbon slot cover.
Remove the ink ribbon. 1 Lift the lock lever. 2 Lift out the ink ribbon.
CAUTION Cautions when replacing the ink ribbon i Do not insert fingers into the ink ribbon slot. Immediately after printing, the inside of the printer is very hot. If fingers etc. are inserted into the ink ribbon slot, they may get burned. i When removing the ink ribbon, take care not damage the ribbon by touching it. Do not rewind the ink ribbon i Once used, the ink ribbon cannot be used again even if it is rewound.

DVP-P1_E.book Page 24

LOADING THE PAPER
The paper and ink ribbon are not supplied with this printer. Please purchase the separately sold postcard paper and ink ribbon set.

About the paper

i This printer can print only the exclusive postcard paper. Using paper other than that specified may cause paper jams. Also, you will not be able to obtain the best prints. i The ink ribbon can print only the number of sheets that comes with it. When loading the paper, take care to load it correctly oriented and with the print surface facing down. i Once a paper is printed, do not reinsert it in the printer, as doing so may result in damage. i If the paper is not to be used for a while, remove it from the paper tray. i Only one side of the paper is suitable for printing. i Load the paper with the print side facing down. i A maximum of 50 sheets can be loaded in the paper tray.

How to load the paper

Open the cover of the paper tray.
Confirm the print side. h The print side of the paper is shiny, and the non-print side indicates a place for writing the address.

DVP-P1_E.book Page 25

Insert the paper in the paper tray. h Insert the paper with the print side facing down, and with the top edge near the pull-handle side of the paper tray.
NOTE i Images captured with the camera held vertically are rotated 90 degrees and printed. Image captured with the camera held vertically Image captured with the camera held horizontally

DVP-P1_E.book Page 26

Installing the paper tray
Open the paper tray slot cover. Slowly insert the paper tray into the paper tray slot. h Slowly insert it all the way in. Close the paper tray slot cover.
k To remove the paper tray h Open the paper tray slot cover, grasp the paper tray pull-handle, and pull out the paper tray.
Pull handle CAUTION When printing is finished i Be sure to remove the paper from the paper tray.

DVP-P1_E.book Page 27

INSERT THE CARD
Cards that can be used with this printer
i The cards listed below can be used with this printer: i Only one card can be inserted at a time. h SD Memory Card/MultiMedia Card h CompactFlash/Microdrive h SmartMedia (except for SmartMedia cards that operate at 5V) h Memory Stick (An adapter is required to use Memory Stick Duo.) Note that only card data which was recorded in the DCF compliant format can be printed. Image data which was saved on a computer cannot be printed.

How to insert the card

Turn on the power (see page 21). Open the card slot cover.

Card slot cover

DVP-P1_E.book Page 28
Insert the card. MEMORY CARD indicator h Choose the correct slot for your type of card. Slot A h Take care that the card is oriented correctly, and firmly push it all the way in. Slot A: SmartMedia, SD Memory Card, MultiMedia Card, Memory Stick Slot B: CompactFlash, Microdrive h When a card is inserted, the MEMORY CARD indicator will light.

2-1 2-2

h For index prints, the following information can be confirmed. Date that upper left image was photographed Date that lower right image was photographed
2003. 06. 03 2003. 06. 03

Page number

XXX-XXXX File number* Folder number*
* In PictBridge printing, these are not printed.

100- 0001

0 -0 2

0 -0 3

0 -0 4

0 -0 5

100- 0006

0 -0 7

0 -0 8

0 -0 9

0 -1 0

100- 0011

0 -1 2

0 -1 3

0 -1 4

0 -1 5

100- 0016

0 -1 7

0 -1 8
NOTE Damaged or incompatible data i If the data for an image is damaged, or if the image format is not supported by this printer, a s mark is printed instead of the image.

DVP-P1_E.book Page 32

INDEX SELECT PRINTS
Select the desired image data from the index images on the LCD monitor and print them. You can select several images and specify the number of prints for each image.
Set the printer to the Index Select print mode (see page 29). h The print page as well as the index image and folder number are shown on the LCD monitor.
HINT How to use the index prints i The printed images on the index print (see page 30) correspond to the index images. Having the index print to refer to makes it easier to select the images you want to print.

DVP-P1_E.book Page 33

Specify the image to print and the number of prints. 1 Press the MENU button and move the menu pointer [g] to [Image Number]. 2 Press the [+] or [] button to select the image to print. h When [+] or [] is pressed, the Index Navi moves. Use the Index Navi to specify the image you wish to print. h If you press the [+] and [] COPIES buttons at the same time for about 2 seconds, the number of prints specified in step (3) is applied to all the images. 3 Press the [+] or [] COPIES button to specify the number of prints. h The number of prints for the currently selected image (Quantity) and the total number of prints (Total) are shown on the LCD monitor. h A maximum of 19 prints can be specified. h You can press the CANCEL button to cancel the settings.

2-2 2-1

2-3 2-2 2-1

Index Navi

Number of prints
Total number of prints Press the PRINT button. h The PRINT indicator lights, and printing begins. h During printing, the remaining number of prints (Remains) is shown.
NOTE If the total number of prints indication does not show more than [99]. i The indication for the total number of prints cannot show more than 99. However, you can specify more 100 or more prints. i When the specified total number of prints is 100 or more, the total number of prints indication appears as [w]. During printing the remaining number of prints indication also appears as [w]; when the remaining number of prints becomes 99, the correct number is shown on the display. You can specify borderless prints, date imprint, and sharpness printing (see page 42).

DVP-P1_E.book Page 34

ID-SIZE PRINTS
ID-size images can be printed on one sheet of paper. A set of three 30mm 24mm images and three 45mm 35mm images is printed on one sheet of paper.
Set the printer to the ID Size print mode (see page 29). h The image number and number of prints is shown on the LCD monitor.

DVP-P1_E.book Page 35

Specify the image you wish to print and the number of prints. 1 Press the MENU button, and move the menu pointer [g] to [Image Number]. 2 Press the [+] or [] button to display the number of the image you wish to print. 3 Press the [+] or [] COPIES button to specify the number of prints. h The total number of prints (Total) is shown on the LCD monitor. h A maximum of 19 prints can be specified. Press the PRINT button. h The PRINT indicator lights, and printing begins. h During printing, the remaining number of prints (Remains) is shown.
Total number of prints NOTE You can specify sharpness printing (see page 42).

DVP-P1_E.book Page 36

PRINT ONE IMAGE
The data for one image can be printed on one sheet, or you can make multiple prints.
Set the printer to the One Image print mode (see page 29). h The image number is shown on the LCD monitor.

DVP-P1_E.book Page 37

Specify the image to print and the number of prints. 1 Press the MENU button to move the menu pointer [g] to [Image Number]. 2 Press the [+] or [] button to select the image to print. 3 Press the [+] or [] COPIES button to specify the number of prints. h The total number of prints (Total) is shown on the LCD monitor. h A maximum of 19 prints can be specified.

2-3 2-1 2-1 2-2 2-2

Press the PRINT button. h The PRINT indicator lights, and printing begins. h During printing, the remaining number of prints (Remains) is shown.
NOTE You can specify borderless prints, date imprint, and sharpness printing (see page 42).

DVP-P1_E.book Page 38

PRINT ALL IMAGES
You can print all the images on the card.
Set the printer to the All Image print mode (see page 29). h The image number and total number of images (Total) is shown on the LCD monitor.

Total number of images

DVP-P1_E.book Page 39
Remaining number of prints
NOTE If the total number of prints indication appears as [w]. i The indication for the total number of prints cannot show more than 99. However, when the remaining number of prints becomes 99, the correct number is shown on the display. You can customize the setting. You can specify borderless prints, date imprint, and sharpness printing (see page 42).

DVP-P1_E.book Page 40

DPOF PRINTING
You can print the images according to the DPOF settings set with your camera, for example. DPOF-standard printing --index prints and printer-controlled settings, for example-- is possible. (DPOF trimming is not available.)
Set the printer to the DPOF print mode (see page 29). h The DPOF settings are shown on the LCD monitor.

Number of index prints

Total number of prints

DVP-P1_E.book Page 41

NOTE If the total number of prints indication does not show more than [99]. i The indication for the total number of prints cannot show more than 99. However, you can specify 100 or more prints. i When the specified total number of prints is 100 or more, the total number of prints indication appears as [w]. During printing the remaining number of prints indication also appears as [w]; when the remaining number of prints becomes 99, the correct number is shown on the display. If printing does not begin. i It is not possible to print if there are 1980 or more DPOF specified prints. Decrease the number of specified prints and repeat the procedure. You can specify borderless prints and sharpness printing (see page 42).

DVP-P1_E.book Page 42

OTHER PRINT SETTINGS
The following printing functions are available: Borderless prints [Borderless*]: The image is printed with no white border around the picture. Date imprint [Date]: The date the image was captured is imprinted in the corner. Sharpness printing [Sharpness]: The images are printed with extra-sharp outlines. * Due to the difference in the respective horizontal-to-vertical ratios of the digital image and the paper, the upper and lower portions of the image may be cropped in borderless prints.
Set the printer to the desired print mode (see page 29). h The settings that can be customized differ depending on the selected print mode. Index print mode: Not available. Index Select, All Image, and One Image print modes: Borderless prints, date imprint, and sharpness printing can be specified. ID Size print mode: Sharpness printing can be specified. DPOF print mode: Borderless prints and sharpness printing can be specified. Specify the image and the number of prints. Index Select print mode: (see page 32) ID Size print mode: (see page 34) Print one Image mode: (see page 36) All Image print mode: (see page 38) DPOF print mode: (see page 40) Specify printing functions. 1 Press the MENU button to move the menu pointer [g] to the [Setting] menu. 2 Press the [+] or [] button. h Press the [+] or [] button to check the checkbox for the desired print functions. Press the PRINT button. h The PRINT lamp lights and printing starts.

3-1 3-2

DVP-P1_E.book Page 43
PRINTING k About date imprinting i You can select the format of the imprinted date. 1 Select the [Mode] menu. 2 Press the [+] and [] COPIES buttons at the same time for about 2 seconds. h The screen to select the date format appears. 3 Press the [+] or [] COPIES button. h Each time the button is pressed, the date format changes. Specify the desired format.

[u] is shown on the LCD monitor, and the INK RIBBON indicator is lit. [u] is shown on the LCD monitor, the PAPER indicator is lit or flashing and the INK RIBBON indicator is lit.
The ink ribbon is depleted.
The paper tray is empty or there is a paper jam in the printer, and the ink ribbon is depleted.
The card image(s) cant be read and the MEMORY CARD indicator is lit red or orange.
More than one card is inserted in the printer: The MEMORY CARD indicator is lit orange. The inserted card is defective: The MEMORY CARD indicator is lit red. The SmartMedia is inserted incorrectly: The MEMORY CARD indication is lit red.

DVP-P1_E.book Page 46

TROUBLESHOOTING Problem or indication Printing is not possible, although the card is correctly inserted and the procedure was correctly followed. Cause Solution
The inserted card has defecNot a malfunction. Use a card tive or has unreadable image that works properly, take the data. In this case, the printer photos again, and print them. will operate differently depending on the selected print mode. All Image print mode i When defective image data is read, [v] is shown on the LCD monitor. i The defective image is skipped, and the next image is read. i Defective image data is not printed. Index print mode i The defective image is skipped, and the next image is read. i Defective image data is printed as a s mark. i Images are printed except for defective image data. DPOF print mode i When defective image data is read, [v] is shown on the LCD monitor. i The defective image is skipped, and the next image is read. i Images are printed except for defective image data.
[w] is shown instead of the number of prints indication on the LCD monitor.
The card inserted has 1981 or more images recorded. There is no recorded image data on the card. The card was recorded using a camera that does not conform to the DCF standard.
i Do not record more than 1980 images on one card. i Insert a card in which image data has been recorded. i Insert a card that was recorded using a camera that conforms to the DCF standard.

DVP-P1_E.book Page 47

TROUBLESHOOTING Problem or indication A TIFF image cannot be printed. Cause i The image is a 16-bit TIFF image that was saved using a computers image processing application. * This printer cannot recognize TIFF images that do not conform to the DCF standard. i The amount of image data is large. * The higher the resolution and the lower the compression ratio, the more beautiful the prints that can be produced. However, when the amount of image data is large, it takes more time to read, and the start of printing is delayed. i The paper used is not the specified paper. * There is a paper jam. i In very rare cases you may not be able to print an image even though it conforms to the DCF standard, or the printing may be distorted. The images in the index print are not in order by date. The printed image is small. The images were edited on a computer. Solution i When saving a TIFF image on your computer, specify an 8-bit TIFF file.

The printing speed is slow.
i Make the image resolution lower or the compression ratio higher.
The print is blurred or smudged.
i Use the specified paper.
i Change the conditions when photographing. i Select borderless printing (see page 42).
Not a malfunction. The dates of images that were edited on a computer are not recognized. Not a malfunction. Images having a resolution of pixels or less are printed without being enlarged. In addition, they cannot be printed as borderless prints. Install a new ink ribbon, and press the PRINT button to resume printing.
The image printed has a resolution is pixels or less.
The paper supply The ink ribbon is depleted. was depleted and more paper was inserted in the paper tray, but printing does not resume.

DVP-P1_E_06.fm

Page 48
Monday, September 8, 2003

4:02 PM

SPECIFICATIONS

Printer

Dye-sublimation printer 310 dpi 100 mm 148 mm (about 4" 6") True borderless Paper feed Automatic feeding from paper cassette Paper cassette Maximum 50 sheets Printing time About 40 seconds/page (for borderless prints, excluding image processing time) (except for index prints and ID-size prints) Ink Ribbon cartridge Print up to 100 sheets (when using DVP-IPK100/U) Gradations 8-bit/color LED indications Power, MEMORY CARD, INK RIBBON, PRINT Card slot CF type I/II, SmartMedia (3.3V), SD Card, Memory Stick Image format JPEG/TIFF format (DCF, DPOF, Exif 1.0 - 2.2 compliant) Note: Designed mainly by the Japan Electronics and Information Technology Industries Association (JEITA), DCF (Design rules for camera file system) is standard for digital still camera image files to provide interoperability between digital photography devices for the images stored on removable memory cards. However, rt is not guaranteed that all devices will support the DCF standard. Image size Maximum 12,000,000 pixels (Maximum 10,000,000 pixels for TIFF) Print mode Index, Index select, One, All, DPOF, PictBridge, ID photo Print option Borderless on/off, Date on/off, sharpness on/off Paper feed Automatic paper feed (maximum 50 sheets) Ambient Temperature 10 to 35C (operating) environment 10 to 55C (storage) (recomHumidity 35 to 80% (operating, no condensation) mended) 10 to 90% (storage, no condensation) Power supply (AC adapter) AC100-120V (DVP-P1U), AC220-240V (DVP-P1EX) DC in DC 24V Power consumption 82 W Weight 2.2 Kg Dimensions (W H D) 162 mm * Even if an image format complies with the DCF standard, complete compatibility is not guaranteed. Printing system Resolutions Paper size

DVP-P1_E.book Page 49

AC adapter specifications
Power supply DVP-P1EX (VAR-P1EX): AC220V 240V, 50/60Hz, 0.45A DVP-P1U (VAR-P1): AC100V 120V, 50/60Hz, 0.85A Rated power DC24V, 3A Operating environment 0C 40C Storage environment 20C 85C Dimensions and Weight 150 mm (excluding protrusions) (W H D) 450g (excluding power cord)

Power cord specifications
Rated DVP-P1EX (VAR-P1EX): AC250V, 2.5A DVP-P1U (VAR-P1): AC125V, 10A i When using the AC adapter abroad, the power cord may need to be replaced in accordance with local requirements.
Paper tray specifications
Size Capacity 100 mm 148 mm (about 4" 6") (Postcard size) 50 sheets max.
Postcard paper and ink ribbon specifications
DVP-IPK50/U DVP-IPK100/U Storage conditions (DVP-IPK50/U, DVP-IPK100/U) Paper Ink ribbon Paper Ink ribbon Temperature 50 postcards For printing 50 postcards 100 postcards For printing 100 postcards Less than 40C

DVP-P1_E.book Page 50

DVP-P1_Es.book

Page 51

3:30 PM
ol_DVP-P1_E_Cover4.fm Page 1

4:08 PM

,,2169 2427.3083

3,7 5,0 6,5 6,5 7,5 6,5 6,5 20,0 30,0 40,0 3,7 5,0 5,0 12,4 8,7 6,5 3,7 6,5 6,5 3,7 3,7 5,0 6,2 6,2 6,2 6,2 6,2 6,2 6,2 3,7 7,4 4,9 3,7 5,0 3,7 3,7 3,7 5,0 3,7 12,5 7,4 7,4 7,4 10,0 10,0 10,0 6,2 6,2 6,2 7,4 5,0 7,4 7,4 12,4 25,0 5,0 3,7 12,5 7,4 12,5 7,5
Malkari Max et la formule secrte Max et Marie font des courses Max sur la lune Mega clips et icons 1 Mega clips et icons 2 Mia 3-Juste temps Minskies Monstres et Cie-Billard extra Monstres et Cie-Bowling Machine Monstres et Cie-Catapulte Attaque Monstres et Cie-Flipper frayeur Moop & Dreadly - Le trsor de l'ile Bing-Bon Motocross Madness 2 Mystery III - Exil Nascar Revolution Nuclear Strike OfficeHelp PacMax Classics Passion Pinball Permis de conduire de A Z Photo Gallery 1 Print Atelier Racing Simulation 2 Rayman 2 - The Gread Escape Revenant FR Road Rash Rollcage RollerCoaster - Tycoon RollerCoaster - Tycoon 2 RollerCoaster - Tycoon 2 Gold Edition Screen Savers Sim Ant FR Sim Copter Sim Earth FR Sim Farm FR Sim Golf Sim Life FR Sim Tower Sim Tunes Streets of Sim City The F,A,Premier League Football Manager The F,A,Premier League Stars Theme Hospital Theme Park World Thunder Brigade Top Series - FIFA 2001 Top Series - Sim City 3000 World Edition Top Series - Theme park Inc, Ubi Soft Exclusive - Crimson Skies Ubi Soft Exclusive - Midtown Madness Ultra Entertainment - Mastermind Ultra Entertainment - Rubik's Games VIP Versailles Wallpaper 1 Warbirds Warm Up FR Worms Reinforcements Xtreme Arcade Games Xtreme Brain Games
3,7 7,5 7,5 7,5 3,7 3,7 12,5 3,7 5,0 5,0 5,0 5,0 15,0 5,0 4,0 6,2 6,5 12,5 6,2 7,4 24,8 3,7 7,4 4,0 5,0 5,0 6,5 4,9 5,0 26,5 21,5 3,7 6,2 6,2 6,2 6,2 6,2 6,2 6,2 6,2 6,5 6,5 6,5 6,5 6,5 3,7 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 3,7 3,7 5,0 5,0 5,0 5,0
Xtreme Space Games TV - VIDEO - AUDIO - DVD - SAT TVC SANYO 36 CM + RADIO TVC NOKIA 3724 OCE TV STAND NOKIA METAL TV STAND NOKIA S522 TV STAND SANYO 28DN5 VCR SIEMENS FM 739 V6 DVD NORTEK NDVX2503 TV LCD SANYO 26LC33 TV LCD SANYO 19LD86DVC ACCESSOIRES VIDEO-AUDIO ACCU CAMERA NOKIA ZOOM 6V 1,9AH ADAPTATEUR ALLUME-CIGARES 1,5-12V ADAPTER POUR CHARGE 3 ACCUS SUPPORT TORCHE PIECES DETACHEES TV THT NOKIA THT NOKIA THT THT THT PHILIPS THT PHILIPS THT MULTITECH TRIPLEUR NOKIA LIBRAIRIE MA LIVRE PC TECHNIQUE BIOS LE GUIDE PC TOOLS 7,1 MA RAPIDO PCTOOLS PROGRAMMES MA SUPER DRIVERS WIN 97 MA LIRE ECRIRE ET COMPTER MA VIDEO MACHINE MA SUPER DRIVERS II MA REGLAGES WIN95 MA SUPER DRIVERS WIN 95 MA CLIPPARTS SPORTS COLLECTION MA CARTES SON MA SUPERDRIVERS 2000 MS ENCARTA 2000 FR SYMANTEC PCTOOLS + SYMANTEC NORTON 2000 MCAFEE 2000 TOOLBOX CD SHAREWARE CD PHILIPS FILMS DE LEGENDE HAUPPAUGE TOOLKIT RUBANS MAC TA IMPRIMANTE NEC IMPRIMANTE OLIVETTI IMPRIMANTE OLIVETTI IMPRIMANTE LEXMARK CALCULATRICE PHILIPS ROULEAU ENCREUR CALCULATRICE IMPRIMANTE CMD 1224 IMPRIMANTE CMS MPS803 IMPRIMANTE SEICOSHA IMPRIMANTE NEC P2200 IMPRIMANTE CMD 4023 IMPRIMANTE OLIVETTI DM105 IMPRIMANTE EPSON