Video demonstrating the amazing Sanyo PLC-XU41 Home cinema projector for sale on projector-store.com.
Sponsored by: http://www.DiscountTVLamps.com - Sanyo POA LMP93 Projector Lamp Replacement Video Guide Here is a video ...
INSTALLATION INSTRUCTIONS SLB-131 HANGER BRACKET
for EIKI LC-SB22, LC-XB23, SANYO PLC-XU70, XU73, Prior to assembly, unpack carton and verify contents. For security installation, use security hardware package inside the ALL-POINTSTM Security Kit. Follow the instructions below for attaching the bracket to the projector using either standard hardware or security hardware. If you are missing any of the following components, please contact Customer Service at 1-800-582-6480
(1) (4) (1)
SLB-131 Bracket 10 - 24 Thumb Nuts.5" X.194" X.5" Nylon Spacer
(4) (3) (1)
M4 Flatwashers M4 x 10mm Pan Head Screws M4 x 20mm Pan Head Screws
1. 2. Turn projector upside down on a flat surface. Place the SLB-131 bracket onto the bottom of the projector lining up the four holes in the bracket with the four threaded inserts in the bottom of the projector. Using the three M4 X10mm mounting screws and M4 washers, start them into the mounting holes by hand Slid the one nylon spacer between the bracket and ...