Cal. 5Y85, 5Y89

INSTRUCTIONS BEDIENUNGSANLEITUNG INSTRUCTIONS ISTRUZIONI INSTRUCCIONES INSTRUES

(P. (S. (P. (P. (P. (P.

3) 9) 15) 21) 27) 33)

English

You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 5Y85/5Y89. For best results, please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz Watch. Please keep this manual handy for ready reference. Sie sind jetzt Besitzer einer SEIKO Analog-Quarzuhr Kal. 5Y85/5Y89. Bitte lesen Sie diese Bedienungsanleitung vor Verwendung der Uhr sorgfltig durch und heben Sie sie gut auf. Vous voici lheureux propritaire dune montre quartz analogique SEIKO Cal. 5Y85/5Y89. Pour obtenir dexcellentes performances de cet article SEIKO, veuillez lire attentivement cette brochure que vous conserverez pour toute rfrence ultrieure. Siete ora in possesso di un orologio SEIKO Analogico al Quarzo Cal. 5Y85/5Y89. Per ottenere i migliori possibili risultati dal Vostro orologio, leggere attentamente le istruzioni di questo manuale prima di utilizzare il Vostro orologio SEIKO analogico al quarzo. Conservare poi il manuale stesso per ogni qualsiasi eventuale futuro riferimento. Enhorabuena por su adquisicin de un reloj SEIKO analgico de cuarzo Cal. 5Y85/5Y89. Para ptimo resultado, lea detenidamente las instrucciones de este folleto antes de usar el reloj. Guarde este manual para consulta posterior. Voc pode sentir-se orgulhoso de possuir um Relgio SEIKO Quartz Anlogo Cal. 5Y85/5Y89. Para obter os melhores resultados, leia atentamente as instrues contidas neste opsculo antes de usar o seu Relgio SEIKO Quartz Anlogo. Queira conservar este manual para referncias futuras.

ENGLISH English

CONTENTS
DAY AND TIME SETTING... DATE SETTING.... NOTES ON USING THE WATCH.... BATTERY CHANGE... SPECIFICATIONS....
For the care of your watch, see TO PRESERVE THE QUALITY OF YOUR WATCH in the attached Worldwide Guarantee and Instruction Booklet.

CAL. 5Y85, 5Y89

DAY AND TIME SETTING

Day hand

Hour hand

Minute hand

Date hand Day hand

c CROWN

Pull out to second click when Second hand is at the 12 oclock position. Turn clockwise to advance Hour and Minute hands until Day hand is set to the desired day of the week. Turn to set the time. Push back completely in accordance with a time signal.

DATE SETTING

Second hand 24-hour hand

a: Normal position

b: First click

c: Second click

Date hand
Pull out to first click. Turn clockwise to set Date hand to the desired date. Push in. 5

NOTES ON USING THE WATCH

To advance the day hand quickly, turn back the hour and minute hands 4 to 5 hours beyond the point the day normally changes, and then advance them again until the day hand is set to the next. * The day hand will not move back by turning the crown counterclockwise. When adjusting the day hand, turn the crown slowly. The 24-hour hand moves correspondingly with the hour hand. When setting the hour hand, check that the 24-hour hand is correctly set. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact time.

BATTERY CHANGE

The miniature battery which powers your watch should last approximately 3 years. However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period. When the battery expires, be sure to replace it as soon as possible to prevent any malfunction. For battery replacement, we recommend that you contact an AUTHORIZED SEIKO DEALER and request SEIKO SR916SW battery.

Do not set the date hand between 9:00 p.m. and 1:00 a.m. Otherwise, it may not turn properly. While setting the date hand, check that it moves properly in one-day increments. It is necessary to adjust the date at the end of February and 30-day months.

WARNING

Do not remove the battery from the watch. If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately.

CAUTION

Never short-circuit, heat or otherwise tamper with the battery, and never expose it to fire. The battery may burst, become very hot or catch fire. The battery is not rechargeable. Never attempt to recharge it, as this may cause battery leakage or damage to the battery. 6 7

SPECIFICATIONS

5 Frequency of crystal oscillator. 32,768 Hz (Hz = Hertz Cycles per second) Loss/gain (Monthly rate).. Less than 20 seconds at normal temperature range (5 C ~ 35 C) (41 F ~ 95 F) Operational temperature range.. 5 C ~ +50 C (23 F ~ 122 F) Driving system.. Step motor Display system Time... 24-hour, hour, minute and second hands Day... Indicated by day hand Date... Indicated by date hand Battery.. SEIKO SR916SW, 1 piece IC (Integrated Circuit).. C-MOS-IC, 1 piece
* The specifications are subject to change without prior notice for product improvement.

CAL. 5Y85 ANALOGUE QUARTZ

ENGLISH

q q q q
Time indicates by the hour, minute and second hands Date indicates by the date hand Day of the week indicates by the day hand The 24-hour hand indicates the hour in the 24-hour indication

DISPLAY AND CROWN

Minute hand Date hand

Day hand

English

a Hour hand

Second hand 24-hour hand

a. Normal position

b. First click

c. Second click

SCREW DOWN CROWN
[for models with screw down crown]

Unlocking the crown

1 Turn Crown counterclockwise until you no longer feel the threads turning. 2 Crown can be pulled out.

Locking the crown

1 Push Crown back in to normal position. 2 Turn Crown clockwise while pressing it lightly until tight.
TIME, DAY AND 24-HOUR HAND SETTING

TIME SETTING

Hour hand Minute hand
CROWN 1 Pull out the crown all the way to the second click when the second hand is at the 12 oclock position. The second hand will stop on the spot. CROWN 2 Turn the crown to set the time and 24-hour hand.
* As the hour and minute hands move, the 24-hour hand changes correspondingly.

Second hand

24-hour hand
3 Push the crown back into the normal position in accordance with a time signal.

DAY SETTING

Hour hand Minute hand Day hand
1 Pull out the crown to the second click. CROWN 2 Turn the crown clockwise to advance the hour and minute hands until the day hand is advanced to the desired day.
* The day hand will not move back.
3 Push the crown back into the normal position.

HOW TO SET THE DATE

Setting the date

Date hand

CROWN 1 Pull out the crown to the first click. 2 Turn the crown clockwise to set the date hand to the desired date. 3 Push in.
NOTES ON OPERATING THE WATCH

TIME/DATE SETTING

q When setting the hour hand and 24-hour hand, check that AM/PM is correctly set. The watch is so designed that the date and day change once in 24 hours. q When setting minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute. q When setting the date, be careful not to pull out the crown to the second click instead of the first click. Otherwise, the second hand stops and the time setting is made necessary. q To advance the day hand quickly, turn back the hour and minute hands about four hours after the day changes to the next, and then advance them again until the day hand is set to the next.

BATTERY CHANGE

Battery life : Approx. 3 years Battery : SEIKO SR916SW
q As the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period. q When the battery expires, be sure to replace it as soon as possible to prevent any malfunction. q We recommend that you contact an AUTHORIZED PULSAR DEALER for battery replacement.

WARNING

q Do not remove the battery from the watch. q If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately. q Never short-circuit, tamper with or heat the battery, and never expose it to fire. The battery may burst, become very hot or catch fire.

CAUTION

q The battery is not rechargeable. Never attempt to recharge it, as this may cause battery leakage or damage to the battery.
TO PRESERVE THE QUALITY OF YOUR WATCH

WATER RESISTANCE

q Water resistance (5 bar)* If WATER RESISTANT 5 BAR q Non-water resistant is inscribed on the case back, your If WATER RESISTANT is not watch is designed and manuinscribed on the case back, your 5 bar WR factured to withstand up to 5 bar watch is not water resistant, and care should be taken not to get it and is suitable for swimming, yachting and taking wet as water may damage the movement. If a shower. the watch becomes wet, we suggest that you q Water resistance (10 bar/15 bar/20 bar)* have it checked by an AUTHORIZED PULSAR If WATER RESISTANT 10 BAR, DEALER or SERVICE CENTER. WATER RESISTANT 15 BAR 10/15/20 or WATER RESISTANT 20 BAR q Water resistance (3 bar) bar WR is inscribed on the case back, If WATER RESISTANT is inscribed on the case back, your watch is your watch is designed and manufactured to designed and manufactured to withstand up to 10 bar/15 bar/20 bar and is withstand up to 3 bar, such as acci- suitable for taking a bath, shallow diving, but not dental contact with splashes of water or rain, but it is for scuba diving. We recommend that you wear a 10 not designed for swimming or diving. PULSAR Divers watch for scuba diving.

* Before using the water resistance 5, 10, 15 or 20 bar watch in water, be sure the crown is pushed in completely. Do not operate the crown when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely. * When taking a shower with the water resistance 5 bar watch, or taking a bath with the water resistance 10, 15 or 20 bar watch, be sure to observe the following: Do not operate the crown when the watch is wet with soapy water or shampoo. If the watch is left in warm water, a slight time loss or gain may be caused. This condition, however, will be corrected when the watch returns to normal temperature.
NOTE: Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water.

TEMPERATURES

Your watch works with stable accuracy within a temperature range of 5 -10C C and 35 C (41 F and 95 F). Temperatures over 60 C (140 F) may cause battery leakage or shorten
the battery life. Do not leave your watch in very low temperatures below 10 C (+14 F) for a long time since the cold may cause a slight time loss or gain. However, the above conditions will be corrected when the watch returns to normal temperature.

MAGNETISM

Your watch will be adversely affected by strong magnetism. Keep it away from close contact with magnetic objects.
CARE OF CASE AND BRACELET
To prevent possible rusting of the case and bracelet caused by dust, moisture and perspiration, wipe them periodically with a soft dry cloth.

SHOCKS & VIBRATION

PERIODIC CHECK
It is recommended that the Light activities will not watch be checked once affect your watch, but be 2-3 every 2 to 3 years. Have careful not to drop your Years your watch checked by an watch or hit it against hard AUTHORIZED PULSAR surfaces, as this may DEALER or SERVICE CENTER to cause damage. ensure that the case, crown, buttons, gasket and crystal seal remain intact. CHEMICALS Be careful not to expose the watch to solvents, mercury, cosmetic spray, detergents, adhesives or paints. Otherwise, the case, bracelet, etc. may become discolored, deteriorated or damaged.

PRECAUTION REGARDING CASE BACK PROTECTIVE FILM
If your watch has a protective film and/or a sticker on the case back, be sure to peel them off before using your watch.