Seiko 7T32 Manual
Seiko 7T32, size: 410 KB
Here you can find all about Seiko 7T32 like manual and other informations. For example: watch, repair, gasket, battery replacement, movement, instructions, battery, chronograph.
Seiko 7T32 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Seiko 7T32 please write about it to help other people. [ Report abuse or wrong photo | Share your Seiko 7T32 photo ]
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
INSTRUCTIONS INSTRUCTIONS INSTRUCCIONES BEDIENUNGSANLEITUNG ISTRUZIONI INSTRUES
(P. (P. (P.
3) 24) 45)
(S. 66) (P. 87)
(P. 109) (130 )
You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 7T32. For best results, please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz Watch. Please keep this manual handy for ready reference. Vous voici lheureux propritaire dune montre quartz analogique SEIKO Cal. 7T32. Pour obtenir dexcellentes performances de cet article SEIKO, veuillez lire attentivement cette brochure que vous conserverez pour toute rfrence ultrieure. Enhorabuena por su adquisicin de un reloj SEIKO analgico de cuarzo Cal. 7T32. Para ptimo resultado, lea detenidamente las instrucciones de este folleto antes de usar el reloj. Guarde este manual para consulta posterior. Sie sind jetzt Besitzer einer SEIKO Analog-Quarzuhr Kal. 7T32. Bitte lesen Sie diese Bedienungsanleitung vor Verwendung der Uhr sorgfltig durch und heben Sie sie gut auf. Siete ora in possesso di un orologio SEIKO Analogico al Quarzo Cal. 7T32. Per ottenere i migliori possibili risultati dal Vostro orologio, leggere attentamente le istruzioni di questo manuale prima di utilizzare il Vostro orologio SEIKO analogico al quarzo. Conservare poi il manuale stesso per ogni qualsiasi eventuale futuro riferimento. Voc pode sentir-se orgulhoso de possuir um Relgio SEIKO Quartz Anlogo Cal. 7T32. Para obter os melhores resultados, leia atentamente as instrues contidas neste opsculo antes de usar o seu Relgio SEIKO Quartz Anlogo. Queira conservar este manual para referncias futuras.
Page FEATURES.... DISPLAY AND CROWNS/BUTTONS... DATE SETTING.... TIME SETTING... ALARM.... STOPWATCH.... TACHYMETER... ADJUSTING THE HAND POSITION... RESETTING THE BUILT-IN IC... BATTERY LIFE INDICATOR... BATTERY CHANGE.... TO PRESERVE THE QUALITY OF YOUR WATCH.. SPECIFICATIONS.... 23
SEIKO ANALOGUE QUARTZ
q Hour & minute hands with small second hand q Date displayed in numerals
q Measures up to 30 minutes in 1/5 second increments. q Can measure repeatedly up to 6 hours.
q Can be set on a 12-hour basis with small alarm hands.
q For models with tachymeter scale
DISPLAY AND CROWNS/BUTTONS
There are three buttons and two crowns.
STOPWATCH minute hand
STOPWATCH 1/5 second hand Minute hand (MAIN TIME)
Hour hand (MAIN TIME) Second hand (MAIN TIME)
ALARM hour hand a: Normal position b: First click
ALARM minute hand c: Second click
Pull out to first click. Turn clockwise until the date for the previous day appears.
NOTES 1 Do not set the date between 9:00 p.m. and 3:00 a.m. Otherwise, the date may not change properly.
* If it is necessary to set the date during that time period, first change the time to any time outside this period, set the date and then reset the correct time.
It is necessary to adjust the date at the end of February and 30-day months.
Pull out to second click and turn until the desired date appears. Push back in to normal position.
Hour hand Minute hand
Pull out to second click when Second hand is at the 12 oclock position. Turn to set Hour and Minute hands. Push back in to normal position in accordance with a time signal.
NOTES 1 When setting Hour hand, check that AM/PM is correctly set.
* The watch is so designed that the date changes once in 24 hours. Turn the hands past the 12 oclock marker to determine whether the watch is set for the A.M. or P.M. period. If the date changes, the time is set for the A.M. period. If the date does not change, the time is set for the P.M. period.
When setting Minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute.
q Alarm time is set on a 12-hour basis. q ALARM hands move independently of MAIN TIME hands.
1 Adjustment of ALARM hands After the main time is adjusted, follow the procedure below, and then set the alarm.
* The following procedure is necessary only after the main time is adjusted. Hour hand (MAIN TIME) Minute hand (MAIN TIME)
Pull out to second click. Turn clockwise or counterclockwise to set ALARM hands to the current time (MAIN TIME). Push back in to normal position.
ALARM minute hand
ALARM hour hand
Alarm time setting
* Once ALARM hands are adjusted to the main time, alarm time setting can be made only by following the procedure below.
Pull out to first click. Press to set ALARM hands to the desired alarm time. Push back in to normal position.
NOTES 3 When setting ALARM minute hand to the current time in 2 , advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute. Alarm hands move quickly if Button C is kept pressed. If CROWN 2 is pulled out to first click within 1 minute after being pushed back in to normal position in 3 , the alarm sounds.
ALARM ENGAGEMENT/DISENGAGEMENT English
Alarm engagement Alarm disengagement
Pull out to first click.
Push back in to normal position.
Designated alarm time
NOTES 1 Alarm rings at the designated time for 20 seconds.
* To stop it manually, press Button A, B or C, or push CROWN 2 back in to normal position.
If CROWN 2 is pulled out to second click, the designated alarm time is canceled with a warning beep.
* In that case, set ALARM hands to MAIN TIME again, push CROWN 2 back in to normal position, and then, pull it out to first click and set the desired alarm time again. However, if CROWN 2 is pushed back in to normal position before the warning beep stops, the designated alarm time will not be canceled.
q Stopwatch measures up to 30 minutes in 1/5 second increments. q After 30 minutes, it will start counting again from 0 repeatedly up to 6 hours.
Before using the stopwatch: Check that CROWNS 1 and 2 are set at normal position. Press Button B to reset STOPWATCH hands to 0 position.
* If the hands do not return to 0 position, follow the procedure in ADJUSTING THE HAND POSITION (page 16).
STOPWATCH 1/5 second hand
1 Standard measurement
START 2 Accumulated elapsed time measurement
* Restart and stop of stopwatch can be repeated by pressing Button A.
3 Split time measurement
RESET SPLIT STOP RELEASE * Measurement and release of split time can be repeated by pressing Button B.
4 Measurement of two competitors
FINISH TIME OF 1ST COMPETITOR
2ND COMPETITOR FINISHES
FINISH TIME OF 2ND COMPETITOR
NOTES 3 If CROWN 1 is pulled out to second click, STOPWATCH hands are reset to 0 position. If CROWN 2 is pulled out to first or second click, STOPWATCH hands are reset to 0 position. When stopwatch has been reset and Button A is pressed before the hands reach 0 position, stopwatch still starts counting when Button A is pressed.
TACHYMETER (for models with tachymeter scale on the dial)
To measure the hourly average speed of a vehicle
Use the stopwatch to determine how many seconds it takes to go 1 km or 1 mile. Tachymeter scale indicated by STOPWATCH second hand gives the average speed per hour.
STOPWATCH second hand: 40 seconds
Tachymeter scale: 90
90 (tachymeter scale figure) x 1 (km or mile) = 90 km/h or mph
* Tachymeter scale can be used only when the time required is less than 60 seconds.
Ex. 2: If the measuring distance is extended to 2 km or miles or shortened to 0.5 km or miles and STOPWATCH second hand indicates 90 on tachymeter scale:
90 (tachymeter scale figure) x 2 (km or mile) = 180 km/h or mph 90 (tachymeter scale figure) x 0.5 (km or mile) = 45 km/h or mph
To measure the hourly rate of operation
Use the stopwatch to measure the time required to complete 1 job. Tachymeter scale indicated by STOPWATCH second hand gives the average number of jobs accomplished per hour.
STOPWATCH second hand: 20 seconds
180 (tachymeter scale figure) x 1 job = 180 jobs/hour
Tachymeter scale: 180
Ex. 2: If 15 jobs are completed in 20 seconds:
180 (tachymeter scale figure) x 15 jobs = 2700 jobs/hour
ADJUSTING THE HAND POSITION
q If STOPWATCH hands will not return to the 12 oclock position when the stopwatch is reset or when the battery is replaced with a new one, follow the procedure below.
Pull out to second click. Press repeatedly to reset STOPWATCH minute hand to the 12 oclock position. Press repeatedly to reset STOPWATCH second hand to the 12 oclock position. Push back in to normal position.
NOTES 1 Hands move quickly if the respective buttons are kept pressed. 2 After adjusting the hand position, set the main time.
RESETTING THE BUILT-IN IC
q In case any of the hands should move improperly, follow the procedure below to adjust the hand movement.
Pull out to second click. Press simultaneously.
NOTE Before using the watch again, be sure to adjust the position of STOPWATCH hands and set the main time and alarm.
BATTERY LIFE INDICATOR
q When the battery nears its end, the small second hand moves at two-second intervals instead of normal one-second intervals to indicate that the battery needs to be replaced with a new one. * If the alarm is used while the second hand is moving at two-second intervals, the watch may stop operating. Therefore, if you see the second hand moving at two-second intervals, replace the battery with a new one as soon as possible.
The miniature battery which powers your watch should last approximately 2 years. However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period. When the battery expires, be sure to replace it as soon as possible to prevent any malfunction. For battery replacement, we recommend that you contact an AUTHORIZED SEIKO DEALER and request SEIKO SR927W battery.
Do not remove the battery from the watch. If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately. 18
TO PRESERVE THE QUALITY OF YOUR WATCH
s WATER RESISTANCE
Condition of use Indication on case back Degree of water resistance* Non-water resistant Accidental contact with water such as rain and splashes Swimming, yachting and taking a shower Taking a bath and shallow diving Scuba diving** and saturation diving
WATER RESISTANT WATER RESISTANT 5 BAR WATER RESISTANT 10/15/20 BAR
q Non-water resistant If the watch becomes wet, have it checked by an AUTHORIZED SEIKO DEALER or SERVICE CENTER. q Water resistant 5/10/15/20 bar Before using in water, be sure the crowns are pushed in completely. Do not operate the crowns and buttons 5 bar WR when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely.
* Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water. ** We recommend that you wear a SEIKO Divers Watch for scuba diving.
When taking a shower with the water resistant 5 bar watch, or taking a bath with the water resistant 10, 15 or 20 bar watch, be sure to observe the following: * Do not operate the crowns or push the buttons when the watch is wet with soapy water or shampoo. * If the watch is left in warm water, a slight time loss or gain may be caused. This condition, however, will be corrected when the watch returns to normal temperature.
Your watch works with stable +60C accuracy within a temperature -10C range of 5C and 35C (41F and 95F). Temperatures over 60C (140F) may cause battery leakage or shorten the battery life. Do not leave your watch in very low temperatures below 10C (+14F) for a long time since the cold may cause a slight time loss or gain. However, the above conditions will be corrected when the watch returns to normal temperature.
Your watch will be adversely affected by strong magnetism. Keep it away from close contact with magnetic objects.
s CARE OF CASE AND BRACELET
To prevent possible rusting of the case and bracelet caused by dust, moisture and perspiration, wipe them periodically with a soft dry cloth.
s SHOCKS & VIBRATION
Light activities will not affect your watch, but be careful not to drop your watch or hit it against hard surfaces, as this may cause damage.
s PERIODIC CHECK
It is recommended that the watch be checked once every 2 to 3 years. Have your watch checked by an AUTHORIZED SEIKO DEALER or SERVICE CENTER to ensure that the case, crowns, buttons, gasket and crystal seal remain intact.
Be careful not to expose the watch to solvents (e.g., alcohol and gasoline), mercury (i.e., from a broken thermometer), cosmetic spray, detergents, adhesives or paints. Otherwise, the case, bracelet, etc. may become discolored, deteriorated or damaged.
s PRECAUTION REGARDING CASE BACK PROTECTIVE FILM
If your watch has a protective film and/or a sticker on the case back, be sure to peel them off before using your watch. Otherwise, perspiration getting in under them may rust the case back.
Frequency of crystal oscillator. 32,768 Hz (Hz = Hertz. Cycles per second) Loss/gain (monthly rate).. Less than 15 seconds at normal temperature range (5C ~ 35C) (41F ~ 95F) Accuracy of alarm.. 1 minute Operational temperature range. 10C ~ +60C (14F ~ 140F) Driving system.. Step motor, 4 pieces Display system Time.. Three hands (Hour, minute and small second hands) Date.. Displayed in numerals. Stopwatch.. Minute and 1/5 second hands The stopwatch can measure up to 30 minutes in 1/5 seconds. Alarm.. Small hour and minute hands The alarm is set on a 12-hour basis. Battery.. SEIKO SR927W, 1 piece IC (Integrated Circuit).. C-MOS-LSI
* The specifications are subject to change without prior notice for product improvement.
Setting Seiko 7T32
Written by GoldSmithWatchWorks Monday, 04 May 2009 21:54 -
Seiko 7T32 All Reset All reset is used when first setting the watch or when there is unusual or erratic operation. A - Pull Crown 1 out to the second click. B -Press Button A and Button B simultaneously. C - Push Crown 1 back in to the normal position. Zeroing the hands After all reset the hands and calendar must be "Zeroed" to provide a starting point for setting the watch. A - Pull Crown 1 out to the second click. B - * Press Button A to move the chrono minute hand to the zero position. C - * Press Button B to move the chrono second hand to the zero position. D - Push Crown 1 back in to the normal position. E - After adjusting the zero positions proceed to adjusting time and calendar. * Keep the button pressed to move the hand rapidly. Setting the Date A - Pull Crown 1 out to the first click. B - Turn the crown clockwise until the date for the previous day appears. C - Pull Crown 1 out to the second click and turn until the desired day appears. D - Push crown 1 back in to the normal position. Note: Do not set the date between 9:00 p.m. and 3:00 a.m. Otherwise the date may not change properly. Note: Since this watch is not a perpetual calendar it will be necessary to reset the date in February and 30 day months. Setting the Time A - Pull Crown 1 out to the second click when the Small Second Hand is at the zero position B - Turn the crown to the correct hour and minute. Make sure that AM/PM is correctly set or the date will change incorrectly. C - When the time signal is at zero push Crown 1 all the way in to start the watch. Note: When setting the Hour hand make sure that AM/PM is correctly set. Note: When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute. Adjustment of Alarm hands A - Pull Crown 2 out to the second click. B - Turn the crown clockwise or counterclockwise to set the alarm hands to the current time on the main hands. C - Push Crown 2 back in to the normal position. Note: When setting Alarm the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute.
Setting Alarm Time A - Pull Crown 2 out to the first click. B - * Press Button C to set alarm hands to the desired alarm time. C - Push Crown 2 back in to the normal position. * Keep the button pressed to move the hand rapidly. Note: If Crown 2 is puled out to the first click within 1 minute after being pushed back in to normal position, the alarm sounds. Alarm Engagement/disengagement To engage the alarm: A - Pull Crown 2 out to the first click. B - The alarm will ring at the designated time for 20 seconds. To stop the alarm press Button A, B, or C, or push crown 2 back in to the normal position. C - Push Crown 2 back in to the normal position. To disengage the alarm: A - Pull Crown 2 out to the second click. B - The designated alarm time will cancelled with a warning beep. If the crown is pushed back in before the warning beep stops the designated alarm time will NOT be cancelled. C - Push Crown 2 back in to the normal position. Using the Chronograph A - Make sure that Crown 1 and 2 are in their normal positions. B - Press Button A to Start/Stop/Restart. C - Press Button B to Split/Split Release/Reset. Using Dual Time Display When the alarm is not in use the small alarm hands can be used to indicate the time in a different time zone. A - Pull Crown 2 out to the 2nd click and turn to set small alarm hands to the time of a different time zone. B - Push Crown 2 back in to the normal position. C - While Dual Time Display is used be sure to keep Crown 2 at the normal position to disengage the alarm.
SMX-F30BP GSA-4167B Lionheart SV650 ICF-CL75IP Minolta 2060 Grandam 1997 MDX1400 Camileo CMT-SP55TC OF Duty CMT-M35WM Xobp12D 11 AK08 Gasket HT-BD2R TM-271A DCR-DVD205 RM-P41 FAV50879 Raymarine ST40 ES-2207 BM 2000 12-inch Instructions KEH-P2800R Watch DVP-S536D Eu R08 PD115 Universel Iden I530 Chronograph AVR 320 TAV-L1 LA40A550p1R YZF-R6-2006 DVP3040K 32LC7D I W DAC-10 Azur 540A 40 BCE C24-F GR-AXM225u-gr-axm225 P-2302HWL-p1 Fostex 160 PC160 Ultra Zoom KS-FX772R TS-WX20LPA MHZ40C T10HP Dj A EK6322B HD D45 Watches A105-S4284 HDR-TG7VE CJ-N76CL Ds-2090AT-TC CDX-GT200S NDT-1 CF18bdazxmm Battery Replacement CAR 1999 Kyocera K323 20003 Automatic-2004 AD-44 775N-CB775c-np- Movement BD370 RA-840BX3 KX-MB271 AR-M160 FC-20 PET712 CP-X417WF KX-T3155 Ericsson Z200 WG511T DSP-AX1400 Cruzer Battery Coolpix 4100 KX-FLM551 Nikon 2000 Fitness T940 Rambla 250I EA3210 SCF260 Repair TC7114 27V530T Traffic XDR-S10DAB SHR-7082P Lafinion 70W 6955 W SV-AV10 Charger WPS54GU2 KD-G152 Zoom Q3V2 2-revelation Siemens AF51 Silverado 2003
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101