LIMITED EDITION

SLQ023

$ 5,700

Red-accented leather case also contains an actual gear from a Formula 1 race car.
Hour, minute and small second hands Alarm can be set on a 12-hour basis with two small hands Chronograph can measure up to 60 minutes in 1/5 second increments, after 60 minutes it will start counting again from 0 repeatedly up to 12 hours Alarm hands can indicate the time in a different time zone Screwdown crown and caseback Anti-glare sapphire crystal

SNA749

Designed in conjunction with the Formula One Honda Racing Team.

1/100 SECOND

RETROGRADE CHRONOGRAPH
Hour, minute and small second hands Chronograph can measure up to 40 minutes in 1/100 second increments repeatedly up to 120 minutes Analog chronograph measures split time Screwdown crown and caseback Demonstration mode Anti-glare sapphire crystal

SPC001

SPC003
ANALOG/DIGITAL ALARM CHRONOGRAPH, COUNTDOWN TIMER
Digital second hand Two alarms Chronograph can measure up to 24 hours in 1/1000 second increments Chronograph measures split, lap and accumulated elapsed time Memory recall (up to 100 records) Countdown timer Anti-glare sapphire crystal

SNJ019

WORLD TIMER ANALOG/DIGITAL ALARM CHRONOGRAPH
Hour, minute and second hands Analog second hand always synchronized with digital display Month, date and day 12-24 hour changeover 1-channel world alarm Chronograph can measure up to 100 hours in 1/1000 second increments World time: city name display, local time display, daylight savings time adjustment, time transfer function Hourly time signal capability Fully automatic calendar Anti-glare sapphire crystal

SNJ007

SNA481

SRL001

SRL002
Twelve diamonds Second hand subdial

RETROGRADE DAY INDICATOR

31-day calendar display 24-hour display Cabochon crown Sapphire crystal

SNT001

SNT002

LE GRAND SPORT

SRK009

SRK010

SRK012

Second hand subdial

SXDA24

SXDA22

SXDA26

SXDA28

Twenty-eight diamonds Mother-of-pearl dial
Eight diamonds Mother-of-pearl dial

SKK637

SXD799

SKK638

SXDA02

SKK640

SXDA04

SKK511

SXD629

SKK512

SXD630

SKK514

SXD632

SKK538

Forty-two diamonds Cabochon crown Sapphire crystal

SUJC48

SUJC50
Mother-of-pearl dial Cabochon crown Sapphire crystal

SXGM46

SXGM48

SXD642

Four diamonds

Ten diamonds

SLC033

SLC028

SXE586

Titanium

Hour, minute and second hands Automatic power generator

KINETIC

Power reserve indicator function 6-month K.E.S.U. Screwdown See-Thru caseback Greenwich Mean Time indicator (24 hour hand)

SUN005

SUN007
Hour, minute and second hands Automatic power generator Power reserve indicator function 6-month K.E.S.U. One way rotating elapsed timing bezel Screwdown See-Thru caseback

SKA381

SKA382
Hour, minute and second hands Automatic power generator Power reserve indicator function 6-month K.E.S.U. Screwdown See-Thru caseback

SKA379

SKA380

SKA245

SKA192
One way rotating elapsed timing bezel
Hour, minute and second hands Automatic power generator Power reserve indicator function 6-month K.E.S.U.

SKA347

SKA348

SKA366

Screwdown See-Thru caseback

SKA296

SKA294
Titanium Screwdown See-Thru caseback

SKH640

SKH676

SKH677

SNQ067
Once set, the calendar automatically adjusts for odd and even months including February of leap years Indicates month, date and year Battery life indicator

SNQ068

SNQ070
Once set, the calendar automatically adjusts for odd and even months including February of leap years up to February 28, 2100 Indicates month, date and number of years since last leap year High accuracy yearly loss/gain rate of less than 20 seconds Battery life indicator Magnified date window

SMD008

SNQ047

SNQ007

SNQ008

SNQ046

SNQ010

SNQ012

SNQ045

SNQ072

FLIGHT COMPUTER
SEIKO FLIGHT COMPUTER WATCHES ARE FITTED WITH A ROTARY SLIDE RULE BEZEL FOR RAPID CALCULATIONS AND CONVERSIONS OF FLIGHT DATA AS REQUIRED BY PILOTS. THE ROTARY SLIDE RULE CONSISTS OF A BEZEL RULER AND A DIAL RULER, BOTH OF WHICH PROVIDE A WIDE VARIETY OF COMPUTATIONS AND CONVERSIONS OUTLINED BELOW.

CHRONOGRAPHS

CONVERSION SCALES
DISTANCE: Nautical Miles Statute Miles Kilometers FUEL VOLUME CONVERSION: US gallons Imperial gallons Liters WEIGHT CONVERSION: Pounds Kilograms FUEL VOLUME-TO-WEIGHT CONVERSION: Fuel pounds US gallons Imperial gallons Oil pounds US gallons Imperial gallons

HOW TO SET THE TIME/CALENDAR
1. Unscrew the crown (if screwdown type) and pull out to the first click. 2. Turn crown counter clockwise until the previous days date appears. 3. Pull crown out to the second click when the second hand is at the 12 oclock position. The second hand stops on the spot. 4. Turn crown clockwise until the present date appears. 5. Set the hour and minute hands to present time. Be sure AM and PM are set accordingly. 6. Push crown back in to the normal position in accordance with a time signal. 7. Screw in (if screwdown type) the crown. Notes: Do not set the date between 10:00 AM and 2:00 AM, otherwise it may not change properly. If it is necessary to set the date during that time period, first advance the time ahead of 2:00 AM, set the date and then reset the correct time. The date changes instantly when the hands move past the 12 oclock marker at midnight. When the date is set by turning the hands, however, it may change gradually between 2:00 AM and 6:00 AM. This is not a malfunction.

Continued on page 66

WATCH OPERATION

REMARKS ON THE K.E.S.U.

Continued from page 65
When setting the hour hand, check that AM/PM is set correctly. The watch is designed so that the calendar changes once in 24 hours. Turn the hands past the 12 oclock marker to determine whether the watch is set for the AM or PM period. If the date changes the time is set for the AM period. If the date does not change, the time is set for the PM period. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute. When setting the time, make sure that the second hand is moving at one-second intervals. It is necessary to adjust the date at the end of February and 30-day months. In this case, pull the crown out to the first click and turn it counter-clockwise until the desired date appears.
The chronograph can measure up to 12 hours, 6 minutes and 12.2 seconds in 1/10 second increments. The measured time is indicated by small hands that move independently of the hands for time indication.
TIPS ON READING THE HANDS
The minute hand turns a full circle in 30 minutes. The indicated scale, therefore, should be read differently depending on the position of the hour hand. Ex.) The minute hand indicates 10: Measured time is either 10 minutes or 40 minutes. Check the position of the hour to decide which to choose. 1 hour and 10 minutes (The hour hand is nearer to the 1-hour marker) 1 hour and 40 minutes (The hour hand is nearer to the 2-hour marker) Ex.) 1 hour 55 minutes 50 seconds and 9/10th: Second hand reading (The second hand almost points to 51 but should be read as 50 as the 1/10 second hand indicates 9) Minute hand reading (The minute hand almost points to 26 but should be read as 55 as the measured seconds are 50 and the hour hand is nearer to the 2-hour marker. Refer to the first example in this section)

Do not pull the crown out to the second click position with the intention of stopping the second hand just to save energy. By doing so, a large amount of current flows through the built-in Integrated Circuit. Therefore, pulling the crown out to the second click position will not save energy but, in fact, consume more energy than usual.
When the second hand starts moving at two-second intervals instead of the normal one-second intervals, the watch will run down in approximately 12 hours.
HOW TO SET THE TIME AND CALENDAR
1. Unscrew crown and pull out to the first click position. 2. Turn crown counterclockwise until the previous days date appears. 3. Pull crown out to the second click position. 4. Turn counter-clockwise to advance the hour and minute hands past 12:00 AM. Doing so will advance the date to the current date. 5. Set hour and minute hands to the desired time taking AM or PM into consideration. 6. Push crown back in to the unscrewed position. 7. Screw in the crown.

HOW TO USE STOPWATCH

The stopwatch can measure up to 45 minutes in 1/5 second increments. After 48 minutes, the stopwatch stops automatically. 1. Press button A to start, stop and restart the stopwatch. 2. Press button B to reset the stopwatch. 3. Do not press buttons A and B at the same time, or press one of the two buttons while keeping the other pressed.

START/ STOP

Standard measurement START STOP RESET
Accumulated elapsed time measurement RESET START STOP RESTART STOP RESET

SNL036 P. 6

SNL038 P. 6

SEIKO SERIES SNP (7D48)

N N N N N N N N N Hour, minute and second hands. Date calendar. Automatic power generator. Automatic energy saving function. Time Relay function. Perpetual Calendar. Energy depletion forewarning function. Overcharge prevention function. 4-year energy storage.
DISPLAY AND BUTTON OPERATION
Minute hand Big calendar Hour hand Clockwise (upward) First click position: calendar adjustment
Year display dial Second click position: Time settings Counterclockwise (downward) 24-hour indicator
Second hand Month indicator
Orientation of the displays of year, month and 24-hour indicator may vary depending on the model.

KINETIC AUTO RELAY

This watch is equipped with an Automatic Generating System, the unique technology developed by Seiko, which generates electrical energy to power the watch by utilizing the movement of the arm or wrist, and stores it in the KINETIC ENERGY STORAGE UNIT (K.E.S.U.).

POWER SAVE FUNCTION

In order to conserve the stored electrical energy, the watch automatically enters power save mode to stop the hands from moving approximately 24 hours after the watch is taken off the wrist. In a case that the fully charged watch enters the power save mode, the time relay function of the watch remains operable for approximately four years.

TIME RELAY FUNCTION

When the watch is in power save mode, swinging the watch several times will activate the time relay function, which automatically resets the watch hands to the correct time that has been retained inside the watch.
PERPETUAL CALENDAR FUNCTION
Once set, the calendar automatically adjusts for odd and even months including February of leap years until the year 2100. While the watch is in power save mode, the perpetual calendar continues to function (the calendar continues to properly advance). Even if the watch is completely stopped due to a shortage of stored electrical energy, the calendar can be manually adjusted by simple procedures.

HOW TO CHARGE THE WATCH

When using the watch for the first time after it is purchased, be sure to charge the K.E.S.U. (Kinetic Energy Storage Unit) sufficiently by swinging the watch from side to side before setting the time and other functions. 1. Swing the watch from side to side approximately 500 times at the rate of twice per second. This will start the watch and the second hand will move at one-second intervals. Swinging the watch 200 times further will reserve approximately one day of power. 2. Set the time/calendar and put on the watch. Note: Wearing the watch continuously for 12 hours will accumulate power to run the watch for approximately one and a half additional days. As a general guideline, if you wear the watch every day for 12 hours over a period of a week, the power to run the watch for approximately ten days will be additionally secured. If the watch enters the power save mode, this amount of energy will keep the watch running for approximately one month and a half.

SNP007 P. 4

SNP008 P. 4

2015. 2099

KINETIC/ KINETIC GMT

SEIKO SERIES SKA (5M62), SKH (5M42), SUN (5M65)
N N N N N N N Automatic power generator. Power reserve indicator function. Energy depletion forewarning function. Overcharge prevention function. 6-month K.E.S.U. Hour, minute and second hands. 24 hour hand (5M65 only) - Capable of indicating Greenwich Mean Time (GMT) or used as dual time indicator.
Reserve energy indicator Button A Normal position First Click Second Click Crown

HOW TO CHARGE THE WATCH:

When using the watch for the first time after it is purchased, be sure to charge the K.E.S.U. (Kinetic Energy Storage Unit) sufficiently by swinging the watch side to side before setting the time and other functions. 1. Swing the watch from side to side approximately 250 times at the rate of twice per second. This will start the watch and the second hand will move at one-second intervals. Swinging the watch 200 times further will reserve approximately one additional day of power. 2. Set the time/calendar and put on the watch. Note: Wearing the watch continuously for 12 hours will accumulate power to run the watch for approximately one and a half additional days. As a general guideline, if you wear the watch every day for 12 hours over a period of a week, the power to run the watch for approximately ten days will be additionally secured. If the watch enters the power save mode, this amount of energy will keep the watch from running for approximately one month and a half.
HOW TO SET TIME AND DATE:
Unscrew (if screwdown type) the crown by turning it counter-clockwise and pull out to the first click position. Turn the crown clockwise until the previous days date appears. Pull the crown out to the second click. Turn the crown to advance the hands until the date changes to the next day. The time is set for the A.M. period. Keep advancing the hands to set the correct time. Push the crown back into the original position. Screw in crown (if screwdown type).
HOW TO USE THE 24-HOUR HAND (5M65):
Because this watch is designed with an hour hand that can move separately from the other hands, setting procedures are a bit different. You can set the watch in two different modes: The 24-hour hand shows 24-hour time and acts as an AM/PM indicator while the hour hand shows 12-hour time OR The 24-hour hand shows the time in a different time zone from the time shown by the hour hand. 1. Pull the crown out to the second click position when the second hand is at the 12 oclock position. 2a. For a single time zone, so the 24-hour hand indicates AM/PM, turn the crown in either direction to set the minute hand and 24-hour hand to the current time in your area, using the 24-hour marks on the dial. OR 2b.To use the 24-hour hand to indicate time in another zone, turn the crown in either direction to set the minute hand and the 24-hour hand to the time in another area, using the 24-hour marks on the dial. 3. Push the crown back to normal position. 4. Now pull the crown out to the first click position and rotate it in either direction, moving the hour hand around the dial (it moves in one hour increments) until both the date and hour are correct for your area. 5. Push the crown back to normal position.

PROCEDURES TO CHECK AND ADJUST CALENDAR
STEP 1 Pull out to first click.
STEP 2 ZERO-MATCHING THE SECOND POSITION Press and hold button for 2 seconds, the second hand moves to the initially set zero position which should be exactly at 12 oclock. If not, adjust it by turning the crown. The calendar disk also moves to the initially set zero position within this step. Date window will display the number 1. If not, adjustment can be made by following instructions in step 3. STEP 3 ZERO-MATCHING THE CALENDAR DISK Press the button. The calendar disk swings back and forth for one time to show that you are now adjusting the zero position of the calendar disk. The calendar disk should show the initially set zero position which is 1. If not, adjust it by turning the crown.

2 seconds

Continued on page 73

Continued from page 72

STEP 4 ADJUSTING THE DATE Press the button. The second hand moves to 9 oclock position to show that you are now adjusting the date. The calendar disk moves to the initially set current date. Adjust it, if necessary, by turning the crown. STEP 5 ADJUSTING THE MONTH Press the button. The second hand moves to 10 oclock position to show that you are now adjusting the month. The calendar disk moves to the initially set current month. Adjust it, if necessary, by turning the crown. STEP 6 ADJUSTING THE YEAR Press the button. The second hand moves to 11 oclock position to show that you are now adjusting the year. The calendar disk moves to the initially set current year. Adjust it, if necessary, by turning the crown (the calendar displays the last 2 digits of the Christian Era until 2031).
STEP 7 COMPLETING THE ADJUSTMENT The calendar adjustment is completed by pushing the crown back to the normal position. Hour, minute and second hands will advance to correct time.

BATTERY LIFE INDICATOR

When the second hand starts moving at two-second intervals instead of the normal one-second interval, replace the battery with a new one as soon as possible. Otherwise, the watch will stop operating in a couple of days. The time accuracy is not affected even if the second hand is moving at two-second intervals. While the second hand is moving at two-second intervals, the date will not change. This is not a malfunction.
CHECKING AND ADJUSTMENT OF THE CALENDAR AFTER BATTERY CHANGE
After the battery is replaced with a new one, be sure to check that the calendar is correct. If the watch does not indicate the year, month and date correctly, adjust the calendar. (See HOW TO CHECK AND ADJUST THE CALENDAR.)

SNQ067 P. 25

Hour hand Scroll window Minute hand

Mode indicator

: City name scrolls from right to left in TIME/CALENDAR SETTING display
and WORLD TIME and ALARM modes.

HOW TO CHANGE THE MODE

1. Press button A repeatedly to select mode. The mode name scrolls from right to left. (Time/Calendar World Time Chronograph Alarm)
HOW TO SET TIME AND CALENDAR
N Set the digital time first before setting the analog time, as the second hand is governed by the digital time. N Once the time and calendar of your area are set in the Time/Calendar mode, the time and calendar of the other 28 cities covered in the World Time mode will be automatically set. 1. Press button A to show Time/Calendar mode (wait for display to show). 2. Press button B for 2 to 3 seconds to show Time/Calendar display. 3. Press button D to select the city representing your area. 4. Press button C to select an item (flashing) to be adjusted. With each press of the button, the flashing item changes over in the following order: (City, Second, Minute, Hour, Date, Month, Year, 12-/24 hour display, Second Set, Hour Set, Display Select). 5. Press button D to adjust the selected item: When in the Second Set display, press button D to reset second hand to point to the 12 oclock position. When in the Hour Set display, press button A or D repeatedly to set Hour and Minute hands to match the digital time. When in the Display Set display, press button D to select either the Day/Date or the Time/Calendar display. Press button B to return to Time/Calendar mode. After returning to Time/Calendar mode, if the Day/Date display was selected, it will appear when the second hand passes the 12:00 position twice. * For silent button operation: Press button A to show Time/Calendar mode (wait for display to show). Press button C to turn On/Off.
HOW TO SET WORLD TIME MODE
1. Press button A to show World Time mode. 2. Press button C to select the name of city whose time/calendar you wish to know. Time of the city is displayed in the digital display window and the second hand points to the city on the bezel while the hour and minute hands show the time of your area (home time). 3. Press button D for 2 to 3 seconds to set daylight saving time, if it is in effect in the selected city. * The daylight saving time indicator appears and the digital time advances one hour from the standard time. To return to the standard time display, press button D again for 2 to 3 seconds. * Daylight saving time can be set independently for each city except Greenwich.
HOW TO SET TIME TRANSFER FUNCTION
The time displayed in the Time/Calendar mode can easily be replaced with the time of the city selected in the World Time mode. 1. Press button A to show World Time mode. 2. Press button C to select the desired city. 3. Press button B for 2 seconds to transfer the time of the city selected in World Time mode to Time/Calendar mode. *A beep sounds and the hour and minute hands automatically turn to indicate the transferred time. The mode returns to Time/Calendar mode with the transferred city name shown in the scroll window.

Continued on page 76

Continued from page 75

HOW TO USE CHRONOGRAPH

Stopwatch measures up to 100 hours in 1/1000 second increments. Before using the stopwatch, reset the digital counter to read 00:0000000 by pressing button D. Press button A to show Chronograph mode.

1. STANDARD MEASUREMENT

Press button C to start. Press button C to stop. Press button D to reset.
2. ACCUMULATED ELAPSED TIME MEASUREMENT
Press Press Press Press Press button button button button button C to start. C to stop. C to restart. C to stop. D to reset.

3. LAP TIME MEASUREMENT

Press Press Press Press Press Press Press Press button button button button button button button button C to start. D for lap 1. D to release. D for lap 2. D to release. C for final lap / stop. D for total time / stop. D to reset.
4. TIMING OF TWO COMPETITORS
Press Press Press Press Press button button button button button C to start. D for lap (finish time of the first finisher). C to stop (time difference between first and second competitor). D to stop (finish time of the second competitor). D to reset.

HOW TO SET ALARM TIME

1. 2. 3. 4. Press button A to show Alarm mode. Press button B for 2 to 3 seconds to show Alarm setting display. Press button D to select the city for which you wish to set the alarm. Press button C to select an item (flashing) to be adjusted. With each press of the button, a flashing item changes over in the following order: (Hour, Minute, City) 5. Press button D to adjust the selected item. 6. Press button B to return to alarm mode.
HOW TO ENGAGE/DISENGAGE ALARM
1. Press button A to show alarm mode. 2. Press button C to alternately engage and disengage alarm. * The alarm sounds at the designated time for 20 seconds. To stop it manually, press any one of the four buttons. * To test the alarm, press and hold buttons C and D at the same time in the Time/Calendar mode.

TIME CALENDAR MODE

SNAA61 P 33.

SNAA62 P 33.

SNAA63 P. 33

SNAA64 P. 33

SNA283 P. 34

SNA695 P 34.

SNA696 P 34.

SNAA30 P. 34

SNAB15 P. 35

SNAB19 P. 35

1/100 SECOND, RETROGRADE CHRONOGRAPH

SEIKO SERIES SPC (7T82)

N Hour, Minute and Small Second Hand N Date Hour hand N 4 Chronograph hands: 1/100-second, 1/10-second, second and minute hands. N 40-minute dial with a retrograde minute hand capable of timing for 120 minutes. When the minute counting reaches 40 minutes, the chronograph Small minute hand immediately returns and continues counting from second hand 41 minutes and again after 80 minutes. N 1/100 second high speed movement: The chronograph 1/100-second hand makes 10 full circles in one second. STOPWATCH minute hand N Split time measurement.
STOPWATCH 1/10-second hand STOPWATCH second hand STOPWATCH 1/100-second hand Minute hand

/100 SEC. 1/100 SEC.

10 MIN. 30 IN. 40
a: Normal position b: First click: Date setting c: Second click: Time setting Hand position adjustment
HOW TO SET THE TIME AND CALENDAR:
Unscrew the crown (if screwdown type) and pull out to first click position. Turn the crown counter-clockwise until the previous days date appears. Pull crown out to the second click position. Turn counter-clockwise to advance the hour and minute hands past 12:00 AM. Doing so will advance the date to the current date. Set the hour and minutes hands to the desired time taking AM or PM into consideration. Push crown back to normal position. Screw in the crown (if screwdown type). Note: Do not set the date between 9:00 PM and 1:00 AM Otherwise, the date may not change properly.
CHRONOGRAPH HAND POSITION ADJUSTMENT:
If the Chronograph hands are not in the 0 (12 oclock) position, follow the procedures below to set them to the the 0 (12 oclock) position. Pull the crown out to second click. Press button A for 2-3 seconds. - Chronograph 1/10-second and 1/100-second hands turn a full circle and can now be set to correct position. Press button B repeatedly to set them to the 0 position. Press button A for 2-3 seconds. - Chronograph second hand turns a full circle and can now be set to correct position. Press button B repeatedly to set it to the 0 position. Press button A for 2-3 seconds. - Chronograph minute hand turns a full circle and can now be set to correct position. Press button B repeatedly to set it to the 0 position. Note: Chronograph minute hand turns a full circle passing the 40-minute marker only during the Chronograph hand position adjustment. Push crown back to normal position.

HOW TO USE THE CHRONOGRAPH:
After 3 minutes of timing from a start, the chronograph 1/100-second and 1/10-second hands remain pointing to the 0 position until the watch is stopped or split time measurement is made, at such time, they move to display the measured time. They start to move for a maximum of three minutes after the watch is restarted or the split time display is released. 1. Set crown to normal position. 2. Press button A to Start/Stop/Restart. 3. Press button B to Split/Split Release/Reset.
CHRONOGRAPH DEMONSTRATION:
When the chronograph is reset, pressing button B for 2-3 seconds starts the demonstration of the chronograph hands. If either button A or B is pressed during a demonstration, the demonstration will be stopped and the chronograph will be reset.

SPC001 P 15.

SPC003 P 15.

SPC011 P. 30

SPC012 P. 30

SPC014 P. 30

SEIKO SERIES SPC (7T84)
Mode indicator Center hand Minute hand
0TMRCHR A N Hour, Minute and Small Second Hand. 61 N TIME mode: Hour hand Displays current time. Single time alarm function: Sounds only once at a 0 designated alarm time within 12 hours. a b c 2 N YACHT TIMER modes: a: Normal position 6 Yacht timer combines the functions of a 9 B b: First click: Small second hand count down timer and stopwatch that starts Mode selection operating automatically when timer finishes Small watch Date setting counting down. This function is particularly useful in c: Second click: yacht racing. 5, 6 & 10 minute preset timers are available. Time setting Hand position adjustment N TIMER mode: (TMR) The timer can be set to a maximum of 15 minutes in 1-minute increments N CHRONOGRAPH mode: (CHR) The chronograph can measure 12 hours in 1/5-second increments. When the measurement reaches 12 hours, the chronograph automatically stops. N ALARM mode: (ALM) Daily alarm: set to sound at a designated time everyday on a 12-hour basis. N LOCAL TIME mode: (LOC) The time in another time zone area can be shown in 1-minute increments, offering a dual time display.

MODE SELECT

HOW TO SET THE TIME (MAIN WATCH AND SMALL WATCH) AND CALENDAR:
Unscrew the crown (if screwdown type) and pull out to first click position. Turn the crown clockwise until the previous days date appears. Pull crown out to the second click position when the small second hand is at the 12 oclock position (the small second hand will stop on the spot). Turn clockwise to advance the hour and minute hands past the 12:00 AM. Doing so will advance the date to the current date. Set the hour and minutes hands to the desired time taking AM or PM into consideration. Press button B to set the time for the small watch. - With each press on button B the small watch hands will advance 1 minute. Pressing and holding button B will advance the small hands rapidly. Push crown back to normal position. Screw in the crown (if screwdown type).

Day hand

Date hand
a: Normal position b: First click c: Second click

HOW TO SET TIME AND DAY:

24-hour hand
Unscrew the crown (if screwdown type) and pull out to the second click position. Position of sub dials may vary. Turn the crown clockwise to advance hour and minute hands until day hand is set to the desired day of the week. Once the desired day is indicated, continue to turn the crown to set the hour and minute hands to the desired time taking AM and PM into account (24-hour sub-dial). Push the crown back into the original position. The watch immediately starts ticking. Screw in crown (if screwdown type).
ADVANCED SETTING TECHNIQUES:
1. To advance the day hand quickly, turn back the hour and minute hands 4 to 5 hours beyond the point the day changes (between 11:00 p.m. and 4:00 a.m.) and then advance them again until the day hand is set to the next. a. The day hand will not move back by turning the crown counterclockwise. 2. After the day hand reaches the last day of the week, turn the crown clockwise and the hand will return to the first day of the week. 3. When adjusting the day hand, turn the crown slowly. 4. The 24-hour hand moves correspondingly with the hour hand. 5. When setting the hour hand, check that the 24-hour hand is correctly set. 6. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact time.

CALENDAR ADJUSTMENT:

Pull crown out to first click position. Turn clockwise to set date hand to the desired date. Push crown back to normal position. Note: Do not set the date hand between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly. While setting the date hand, check that it moves properly in one-day increments. It is necessary to adjust the date at the end of February and 30-day months.

SUK007 P. 10

SUK008 P. 10
SEIKO SERIES SNT (5Y66, 5Y67), SRL (6G34)
N N N N Hour, minute and second hands. Retrograde day indicator. 31 day calendar display. 12/24 hour display(s).
Day hand (retrograde day indicator) Hour hand

Minute hand Date hand

Second hand 24-hour hand

HOW TO SET TIME AND DAY

Pull out the crown to the second click. Turn the crown clockwise to advance hour and minute hands until day hand is set to the desired day of the week. Once the desired day is indicated, continue to turn the crown to set the hour and minute hands to the desired time taking AM and PM into account (24 hour sub-dial). Push the crown back into the original position. The watch immediately starts ticking.

Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers
D/PBR Buckle PBR PBR PBR PBR PBR PBR PBR PBR
DL/3-fold w/extender DL/3-fold w/extender
SD SD SD SD SD See-Thru SD See-Thru SD See-Thru SD See-Thru SD See-Thru SD SD SD See-Thru SD See-Thru SD See-Thru SD See-Thru SD SD SD SD
D/PBR D/PBR DL/3-fold DL/3-fold PBR PBR PBR D/PBR D/PBR D/PBR D/PBR D/PBR D/PBR D/PBR PBR PBR PBR 3-fold PBR D/PBR D/PBR D/PBR D/PBR D/PBR D/PBR D/PBR D/PBR D/PBR Buckle Buckle Buckle Buckle D/PBR D/PBR
Snap Snap SD SD SD SD See-Thru SD SD SD SD
Hands, Markers & Bezel Hands, Markers & Bezel 5 Years 5 Years 1-Month K.E.S.U. 10 Years 2-3 Years 2-3 Years Hands & Markers Hands & Markers Hands & Markers Hands & Markers Hands & Markers
DL Buckle PBR PBR PBR DL/PBR DL/PBR DL

NEW MODELS IN BOLD

Hands, Markers & Bezel

Buckle

SNA411 SNA414 SNA481 SNA548 SNA551 SNA552 SNA615 SNA694 SNA695 SNA696 SNA749 SNA765 SNAA01 SNAA02 SNAA03 SNAA05 SNAA30 SNAA61 SNAA62 SNAA63 SNAA64 SNAB15 SNAB19 SND583 SND585 SND586 SND641 SND671 SNF670 SNF672 SNJ007 SNJ017 SNJ018 SNJ019 SNL036 SNL038 SNM035 SNM037 SNP007 SNP008 SNP016 SNP017 SNQ007 SNQ008 SNQ010 SNQ012 SNQ045 SNQ046 SNQ047 SNQ067 SNQ068 SNQ070 SNQ072 SNT001 SNT002
$475.00 $495.00 $550.00 $450.00 $375.00 $395.00 $495.00 $450.00 $325.00 $350.00 $650.00 $425.00 $375.00 $395.00 $425.00 $425.00 $395.00 $325.00 $350.00 $375.00 $395.00 $375.00 $425.00 $295.00 $295.00 $295.00 $325.00 $270.00 $165.00 $165.00 $625.00 $525.00 $535.00 $650.00 $695.00 $695.00 $450.00 $425.00 $695.00 $725.00 $750.00 $775.00 $250.00 $270.00 $270.00 $270.00 $295.00 $270.00 $225.00 $270.00 $295.00 $295.00 $325.00 $375.00 $395.00
Curved H Curved H S S H H Curved H S H H S Curved H HM HM Curved H Curved H H H H H H H H H H H H H H H S H H S S S H H S S S S H H H H H H H H H H H S S 200M SDC 200M SDC 100M SDC 100M 100M 100M 100M 100M 100M 100M 100M SDC 100M 100M 100M 100M 100M 100M 100M 100M 100M 100M 100M 100M 50M 50M 50M 50M 100M 30M 30M 100M 100M 100M 100M 100M 100M 200M SDC 200M SDC 100M 100M 100M 100M 100M 100M 100M 100M 100M 100M 100M 30M 30M 30M 100M 50M 50M
Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Alarm Chronograph Chronograph Chronograph Chronograph Chronograph Chronograph Quartz Quartz Analog/Digital Analog/Digital Analog/Digital Analog/Digital Kinetic Chronograph Kinetic Chronograph Automatic Automatic Kinetic Perpetual Kinetic Perpetual Kinetic Perpetual Kinetic Perpetual Perpetual Calendar Perpetual Calendar Perpetual Calendar Perpetual Calendar Perpetual Calendar Perpetual Calendar Perpetual Calendar Perpetual Calendar Perpetual Calendar Perpetual Calendar Perpetual Calendar Retrograde Day Indicator Retrograde Day Indicator