5000 Series Receiver Systems
Modular multi-channel receiver system for demanding musical and broadcast applications Large mainframe houses up to 8 true diversity receiver modules Small mainframe houses up to 3 true diversity receiver modules Several mainframes can be daisy-chained Indication of transmitter battery status (SK 50/250 and SKM 5000 only) HiDyn plus noise reduction system Mikroport computer display for remote controlling large systems

Tips for Use

Technical Data (Overall System)
Channels per mainframe Frequency range Switching bandwidth Setting of receiving frequencies Frequency response THD Signal-to-noise ratio Noise reduction system Headphone output RF input AF output Housing Weight (fully equipped) max. - 960 MHz (UHF) 138 - 260 MHz (VHF) 24 MHz (UHF band) 7 MHz (VHF band) in 5 kHz steps 40 - 20,000 Hz typ. 0.5 % 117 dB(A) HiDyn plus

1/ (6.3mm) jack socket 4

2 x N-type socket 8 x XLR-3 M 1 x 25-pin sub-D 19, 4 U approx. 25 kg
NT 20-1 Plug-in mains unit for EM 1046 DI Display interface
EM 1046 DI Display interface for Mikroport computer display (supplied with software)

EM 1046 DI

SUPPLY

DISPLAY

DATA IN

- COMP

EM 1046 AO-Z Balancing card, Transformer for the sub-D AF output of the output module

6242/1 HAUF ST E

ST 6242/1 HAUFE
EM 1046 LI Line interface for Mikroport computer display

ST 6242 HAUFE/1

ST 6242/ HAUFE 1

48846 48845

B 1 MB
EM 1046 CI Chassis interface for Mikroport computer display

T S 2/1 E 4F 62 AU H

B A A1 A2 AS 212 CC
EM 1046 SA Power supply module, 230 V AC/120 V AC
EM 1046 AO-X AF output module, 2 AF outputs per channel (XLR, sub-D)
EM 1046 RI RF input module
EM 1046 ASP Antenna splitter module (3 versions)
EM 1046 CC 12 Blanking plate 12 TE, for closing off unused spaces at the rear
EM 20-NT Plug-in mains unit for EM 203 Mainframe EM 1046 MF Mainframe, for up to 8 receiver modules EM 203 MF Mainframe, for up to 3 receiver modules, fitted with I/O module at the rear
+ 12V - 12V + 5V DC - A DC - B OL - A OL - B

REMOTE

+ 20 dB

+ 12 dBu

EM 1046 FA Fan assembly (not pictured)
EM 1046 RX-UHF Receiver module 450 - 960 MHz
EM 1046 RX-VHF Receiver module 138 - 260 MHz
EM 1046 CC 10 Blanking plate, 10 TE, for closing off unused spaces at the front
The EM 1046 MF is a large mainframe for housing up to 8 receiver modules. The mainframe features two integral active 1-to-8 antenna splitters. The back panel houses the power supply module, RF input module and AF output module. The Mikroport computer display can be connected via an interface module. Additional antenna splitter modules are available for multiple mainframe systems. 19 rackmount ears supplied.

EM 1046 MF

Technical Data
Monitor output Gain Output level Housing Dimensions Weight Mainframe for up to 8 receiver modules
1/ (6.3 mm) jack socket 4
+ 20 dB adjustable, + 20 dB switchable max. 18 dBm / 600 , short circuit-proof, load 50 19, 4 U approx. 490 x 190 x 450 mm approx. 9 kg (empty) Cat. no. 03220

Product Variants

EM 203 MF
The EM 203 MF mainframe is used for smaller 5000 series receiver systems. At the front, up to three receiver modules can be housed. The back panel is equipped with an I/O module. The EM 203 MF features two integral passive 1-to-3 antenna splitters. The EM 20-NT plug-in mains unit is not included in the supply schedule, please order separately!
Monitor output Gain Output level Plug-in mains unit Dimensions
+ 20 dB adjustable, + 20 dB switchable max. 18 dBm / 600 , short circuit-proof, load 50 EM 20-NT (not included in the supply schedule) approx. 200x190x360mm approx. 2.5 kg (empty) Cat. no. 03692