MD 441 U

MD 441 U Microphone
The MD 441 U is a microphone of exceptional quality: its acoustic properties come as close as possible to those of a condenser microphone. Accurate signal response and low distortion are ensured, even with the highest sound pressure levels. Surface: all metal body with black simulated leather finish, sound inlet basket: nickel plated

FeaturesBenefits

Excellent feedback rejection Excellent sound quality Spring capsule mountinglow sensitivity to handling noise Hum compensating coilreduces electrical interference Five position bass roll-off switchcompensates for proximity effect Brilliance (treble boost) switchadded speech intelligibility Integral pop filter

Technical Data

Pick-up pattern Frequency response Sensitivity (free field, no load) (1 kHz) Nominal impedance Min. terminating impedance Dimensions in inches Weight super-cardioid 3020,000 Hz 1.8 mV/Pa 2 dB 200 1k 10.63 x 1.3 x 1.4 approx.15.87 oz

Optional Accessories

Locking stand adapter 21' XLR microphone adapter Foam windshield MZA 441 MC21N MZW 441
1 Flexible stand adapter MZQ 441
Architects Specifications
Super-cardioid studio microphone, hum compensating coil, five position bass control, brilliance switch, integral pop filter, frequency response 3020,000 Hz, sensitivity (free field, no load) 1.8 mV/Pa 2 dB at 1 kHz, nominal impedance 200 , min. terminating impedance 1 k, dimensions 270 x 33 x 36 mm, weight approx. 450 g.
Sennheiser Electronic Corporation, 1 Enterprise Drive, Old Lyme, CT 06371 Telephone: 860-434-9190 Fax: 860-434-1759 Web: http://www.sennheiserusa.com
Sennheiser Mexico: Av. Xola 613, PH6, Col. Del Valle 03100, Mexico, DF. Telephone: (525) 639-0956. Fax: (525) 639-9482 Sennheiser Canada: 221 Labrosse Ave, Pte-Claire, PQ H9R 1A3. Telephone: 514-426-3013. Fax: 514-426-3953 Manufacturing Plant:Am Labor 1, 30900 Wedemark, Germany