01-05 13L-M100B/150B.p65e 2 4/23/99, 6:19 PM
Important Information (Continued)
WARNING - FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate this equipment.

Supplied Accessories

Infrared Remote Control/Part Number RRMCG1324CESA (13L-M100B) RRMCG1324CESB (13L-M150B)

Size AA Dry Batteries

Before Operating Your Television
Location For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided. Do not place the back of the television set in a place where free airflow will be restricted. Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using magnets or any other magnetic substance, such as iron are kept well away from this TV set. Power Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an electrician. Do not defeat the safety feature of the polarized plug.
Note: If the set will not be used for a long period, such as during a vacation, unplug the set from the wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the POWER BUTTON in the OFF position.) Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off either the TV or the radio. If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received due to the interference of the TV.
L Before using the television, prepare the Remote Control To use the remote control, insert batteries first. Insert the batteries Pull up Battery Cover
With your thumb nail, pull up the slit as indicated by the arrow to remove the back cover. Insert two batteries (size AA). Be sure to match the battery e/d terminals with the e/d marks inside the compartment.
01-05 13L-M100B/150B.p65e 3 4/23/99, 6:19 PM

Antenna Connections

Antennas The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems: 1. A 75 ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied). 2. A 300 ohm system is a flat twin-lead cable that can be attached to a 75 ohm terminal through a 300-75 ohm ADAPTOR (not supplied). F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)

OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor antenna. A: Using a VHF/UHF combination outdoor antenna. B: Using separate VHF and/or UHF outdoor antenna. Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the TV set. A. Combination VHF/UHF Antennas
VHF/UHF ANTENNA 300/75-ohm ADAPTOR (Not supplied)

300-ohm twin-lead

B. Separate VHF/UHF Antenna
REAR OF TV VHF UHF ANTENNA ANTENNA

VHF/UHF ANTENNA or

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

75-ohm coaxial cable

COMBINER

ANT/CABLE 75

(not supplied)

IN OUT or

REAR OF TV
01-05 13L-M100B/150B.p65e 4 4/23/99, 6:19 PM
Antenna Connections (Continued)
CABLE TV (CATV) CONNECTION
A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR. Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Place your TV on channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. Please note: RF switch equipped with position A/B (not provided) is required. A position on the RF switch (not supplied) : You can view all unscrambled channels using the TVs channel keys. B position on the RF switch (not supplied) : You can view the scrambled channels via the converter/ descrambler using the converters channel keys. RF switch (not supplied)

A OUT IN B

Two-set signal splitter (not supplied) OUT IN Cable TV converter/ descrambler (not supplied)

Cable TV Line

Note: Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
01-05 13L-M100B/150B.p65e 5 4/23/99, 6:19 PM
Quick Reference Control Operation

L Location of Controls

Front Panel

(ENGLISH)

VOL +

VIDEO IN AUDIO

VIDEO/AUDIO IN TERMINALS SENSOR AREA FOR REMOTE CONTROL

POWER VOL + CH

POWER Press On. Press again Off. VOLUME UP/DOWN (+) Increases sound. () Decreases sound.
CHANNEL UP/DOWN (8) Selects next higher channel. (9) Selects next lower channel.
Basic Remote Control Functions

Description of Adjustment Items
Selected item VOL UP (+) button VOL DOWN () button VOLUME (+)/() CHANNEL UP (8)/ DOWN (9) MENU
PICTURE TINT COLOR BRIGHT SHARP FAVORITE COLOR RESET
To increase contrast To make skin tones greenish To increase color intensity To increase brightness To increase sharpness
To decrease contrast To make skin tones purplish To decrease color intensity To decrease brightness To decrease sharpness
To choose a RED, BLUE or STANDARD COLOR TONE. To return all adjustments to factory preset levels.
Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the ADJUST.

mark to VIDEO

Press VOL (+) or () to access PICTURE adjust mode.

P I C T URE

(PICTURE adjust mode)
Press CH UP (8) or DOWN (9) to select the desired mode. (Refer to the diagram below.)
PICTURE TINT COLOR BRIGHT

FAVORITE COLOR

: CH UP (8)

: CH DOWN (9)

Press VOL (+) or () to adjust the setting.
VOL UP (+) increase contrast VOL DOWN () decrease contrast
Repeat steps 4 to 5 to adjust other settings.

Press MENU to exit. 11

Closed Caption
L HOW TO SET CLOSED CAPTION Your TV is equipped with an internal Closed Caption decoder. Closed Caption is a system which allows you to view conversations, narration, and sound effects in TV programs and home videos as subscript on your TV screen as shown on the right. Not all the programs and videos will offer closed caption. Please look symbol to ensure that captions will be shown. for the Closed Caption broadcast can be viewed in two modes: CAPTION and TEXT. For each mode, two channels are available, CH1 and CH2: The [CAPTION] mode subscripts dialogues and commentaries of TV dramas and news programs while allowing clear view of the picture. The [TEXT] mode displays over the picture other various information (such as TV program schedule, weather forecast, etc.) that is independent of the TV programs.
VOLUME (+)/() CHANNEL UP (8)/ DOWN (9) MENU
Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the mark to CLOSED CAPTION.
Press VOL (+) or () to access CLOSED CAPTION setting mode.
C L O S E D C A P T I ON MOD E DA T A : C A P T I ON : CH 1
(CLOSED CAPTION setting mode)
Press CH UP (8) or DOWN (9) to move the MODE or DATA.

mark to either

Press VOL (+) or () to change the CLOSED CAPTION setting.

MODE :

CAPTION TEXT OFF

DATA :

CH 1 CH 2
Note: If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION] mode automatically. Pressing MUTE again will return the set to its previous condition. Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with your set. If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION broadcast, the closed captions will disappear momentarily. When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen may become dark and blank. Should this occur, set the Closed Caption mode to OFF.
12-16 13L-M100B/150B.p65e

4/23/99, 6:31 PM

Parent Control (V-CHIP Operation)
L V-CHIP This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is to prevent your children from watching violence or sexual scenes that may be harmful. Restriction of TV programs includes two characters that contain information about the programs MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted by age and contents. Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for complete control. [1] MPAA RATING RATING G PG age base PG-13 R NC-17 X GENERAL AUDIENCES. All ages admitted. PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate for children under 13. RESTRICTED. Under 17 requires accompanying parent or adult guardian. NO ONE 17 AND UNDER ADMITTED. X Rating is an older rating that is unified with NC-17 but may be encoded on older movies data.Note:
MPAA RATING (Example) Example 1. PG-13 in the age based RATING is blocked, this will automatically block the high ratings R, NC17, X also.

1. User setting

G PG PG-13 R NC-17 X BLOCK BLOCK BLOCK BLOCK age base

2. Block table

G PG PG-13 R NC-17 X not to block not to block Select block autoblock autoblock autoblock
Example 2. R in the age based RATING is blocked, this will automatically block the high rating NC-17, X also.
G PG PG-13 R NC-17 X BLOCK BLOCK BLOCK
G PG age base PG-13 R NC-17 X not to block not to block not to block Select block autoblock autoblock
Note: MPAA RATING is only age based ratings.
12-16 13L-M100B/150B.p65e 13 4/23/99, 6:31 PM
Parent Control (V-CHIP Operation Continued)
[2] TV PARENTAL GUIDELINES

RATING

content base
FV V S L D (Fantasy (Violence) (Sexual (Adult (Sexually Violence) Situation) Language) Suggestive Dialog) X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

TV-Y (All children)

TV-Y7 (Direct to Older Children) TV-G (General Audience)
age TV-PG (Parental Guidance base Suggested) TV-14 (Parents Strongly Cautioned) TV-MA (Mature Audience Only)
X : Content Rating can be set but this Rating is not normally broadcast by TV Station. X : Content Rating can be set. TV-PARENTAL GUIDELINES (Example) Example 1. If TV-Y7 in age based-rating is BLOCK then this will automatically block the higher ratings TV-G, TV-PG, TV-14 and TV-MA. Furthermore, the D, L, S, V, FV in CONTENT are automatically block for TV-Y7 as well unless you choose to unblock for each one.
TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA BLOCK BLOCK BLOCK BLOCK BLOCK age base
TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA

FV V S L D

BLOCK CONTENT (D L S V FV)

Select block

autoblock
Example 2. All item in the age based RATING is not blocked, D in content based ratings will be blocked as below. (2. Block table)
TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA age base

BLOCK CONTENT (D

Age-based ratings can be modified by the content-based ratings but only in the combinations indicated by an X in the table above. Choosing lower age-based rating blocks the higher age-based ratings regardless of content ratings settings. If you set TV-Y and TV-Y7 to BLOCK, CONTENT will display all item. [3] ADDITIONAL MODE Besides the above MPAA RATINGS and TV PARENTAL GUIDELINES new ratings systems data can be downloaded when they become available. (See page 18.)

L HOW TO SET V-CHIP

REMOTE KEYPAD VOLUME (+)/() CHANNEL UP (8)/ DOWN (9)

[1] MPAA RATING

Press CH UP (8) or DOWN (9) to move the CONTROL.

mark to PARENT

Press VOL (+) or () to access PARENT CONTROL mode, then press VOL (+) or () to access V-CHIP select mode.

PARENT VCH I P

CON T RO L B L OC K

(PARENT CONTROL mode)

Press VOL (+) or () to access MPAA RATING.
MP A A T V GU I D E L I N E S
DOWN L O A D : O F F S T A TUS : OF F

(V-CHIP select mode)

Press CH UP (8) or DOWN (9) to move the mark to "PG", then press VOL (+) or () to select BLOCK. If you set PG to BLOCK, PG-13, R, NC-17 and X are automatically blocked.

G PG PG R NC X

: : B LOCK : B LOCK : B LOCK : B LOCK : B LOCK MENU : RETURN
Repeat pressing MENU to return V-CHIP select mode exit.
Ex. If you set G to BLOCK , all RATING are automatically blocked. If you set X to BLOCK, G, PG, PG-13, R and NC-17 are not blocked. 15
12-16 13L-M100B/150B.p65e 15 05/25/1999, 5:42 PM

[2] TV GUIDELINES

Repeat steps 1 to 3 of [1] MPAA RATING. Press CH UP (8) or DOWN (9) to move the GUIDELINES. mark to TV
Press VOL (+) or () to access TV GUIDELINES mode.
TVY TVY7 TVG TVPG TV TVMA
: : B LOCK : B LOCK : B LOCK : B LOCK : B LOCK : ( D L S V FV )

BLOCK CONTENT

Press CH UP (8) or DOWN (9) to move the mark to TVY7, then press VOL (+) or () to select BLOCK. If you set TV-Y7 to BLOCK, TV-G, TV-PG, TV-14 and TV-MA are automatically blocked, then CONTENT D, L, S, V and FV are also.

MENU : RETURN

(TV GUIDELINES mode)
Repeat pressing MENU to exit.
If you want to change BLOCK CONTENT, press CH UP (8) or DOWN (9) to move the mark to BLOCK CONTENT.
Press VOL (+) or () to access CONTENT RATING mode, then press CH UP (8) or DOWN (9) to move each CONTENT item and press VOL (+) or () to select BLOCK or (unblock) for each one.

D L S V FV

: : : : :
B L OC K B L OC K B L OC K B L OC K B L OC K ME NU : R E T URN

(CONTENT RATING mode)

Repeat pressing MENU to return TV GUIDELINES mode, V-CHIP select mode to exit.
Ex. If you set TV-14 to BLOCK, TV-MA are automatically blocked. CONTENT D, L, S and V are automatically blocked by an X in the table on page 14. 16
12-16 13L-M100B/150B.p65e 16 4/23/99, 6:31 PM
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK
Press CH UP (8) or DOWN (9) to move the mark to STATUS, then press VOL (+) or () to activate ON the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)
DOWN L O A D : O F F S T A TUS : ON
Press MENU, then INPUT SECRET No. will be displayed.

I NPUT S E CRE T No.

Enter the 4-digit SECRET No. using the REMOTE KEYPAD.

I NPUT 1 S E CRE T 4 No.

Press MENU and SECRET No. is registered.

L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
V-CHIP HAS BEEN ACTIVATED will be displayed if you watch the program with Program Rating data as same as you configured.
23 V CH I P HA S B E EN ACT I VA T ED TVY7 FV
V-CHIP HAS BEEN ACTIVATED will not be displayed if STATUS is not configured to ON.
Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then V-CHIP BLOCK temporarily will be canceled. If the wrong SECRET No. is chosen, SECRET No. IS INCORRECT will be displayed. Input the SECRET No. again in this case.

I NPUT

S E CRE T
If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again. 17
17-19 13L-M100B/150B.p65e 17 4/23/99, 6:36 PM
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)
Repeat steps 1 to 3 of [1] MPAA RATING, then INPUT SECRET No. will be displayed.

I NPUT

S E CRE T
Enter the 4-digit SECRET No. using the REMOTE KEYPAD and the V-CHIP select mode will be displayed. Repeat configuration of the V-CHIP BLOCK.
L If you intend to change or forget your Secret No., clear the original Secret No. and set up a new one.
Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated], then INPUT SECRET No. will be displayed.
Press and hold both CH UP (8) and DOWN (9) on the TV set simultaneously until the message INPUT SECRET No. disappears.

CHANNEL UP/DOWN buttons

Press MENU two times to exit.
[3]-A. Additional mode (DOWNLOAD) There will be an additional new rating system. In that case, please set up as follows. Subsequently the new rating system will set up automatically.
Repeat steps 1 to 3 of [1] MPAA RATING.
Press CH UP (8) or DOWN (9) to move the DOWNLOAD.

mark to

Press VOL (+) or () to DOWNLOAD : ON.
DOWN L O A D : ON S T A TUS : OF F
Repeat pressing MENU to return exit.
17-19 13L-M100B/150B.p65e

4/23/99, 6:36 PM

L DOWNLOAD V-CHIP DATA
REMOTE KEYPAD VOLUME (+)/() CHANNEL UP (8)/ DOWN (9) MENU
If you watch the program with New Rating System Data, DOWNLOAD screen will be displayed.
P L E A S E WA I T NOW D O W N L O A D I NG V CH I P D A T A

(DOWNLOAD screen)

DOWNLOAD screen will disappear, if DOWNLOAD is finished.
DOWNLOAD would not be started, if you dont watch the program with New Rating System

Data. [3]-B. Additional mode (Example)
Repeat steps 1 to 2 of [4] Additional mode. Press CH UP (8) or DOWN (9) to move the English Ratings, then press VOL (+) or (). mark to Cdn.
MPAA TV GU I DE L I NES Cd n. E n g l i s h R a t i n g s Cd n. F r e n c h Ra t i n g s
DOWNLOAD : ON STATUS : ON
(After download the rating data)
You can select BLOCK or (unblock) from each RATING mode by pressing CH UP (8) or DOWN (9) and VOL (+) or ().

C C8+ G PG 1 4+ 1 8+

: : B LOCK : : B LOCK : : B LOCK
I ND I V I DUAL BLOCK MENU : RETURN
(ENGLISH INDIVIDUAL BLOCK mode)
You can select BLOCK or (unblock) from each RATING mode by pressing CH UP (8) or DOWN (9) and VOL (+) or () if you select Cdn. French Ratings in step 2.

G 8+ 1 3+ 1 6+ 1 8+

: : B LOCK : : B LOCK :
(FRENCH INDIVIDUAL BLOCK mode)
In additional mode Including two types (English mode, French mode), altogether you are able to download 4 kinds of mode. 19
17-19 13L-M100B/150B.p65e 19 4/23/99, 6:37 PM

Energy Save

L This feature lets you lower the power consumption of your TV set which in turn saves you money and minimizes the impact on the environment. When this feature is turned on, it reduces the brightness of the TV to a level that consumes approximately 20% less energy than when the feature is turned off. The reduction in brightness will be less noticeable under low room lighting conditions.
Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the mark to ENERGY SAVE.
Press VOL (+) or () to access ENERGY SAVE select mode.

E N E RG Y SAVE : OF F

(ENERGY SAVE select mode)
Press VOL (+) or () to select ON.

E N E RG Y SAVE : ON

20-22 13L-M100B/150B.p65e 20 4/23/99, 6:38 PM

Set Up

L EZ SETUP By operating the channel presetting functions, you can preset your TV to the desired channels for viewing.
Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the UP.

mark to SET

Press VOL (+) or () to access SET UP mode, then press CH UP (8) or DOWN (9) to move the mark to CH SETTING.
Press VOL (+) or () to access CH SETTING mode.
E Z SE TUP A I R / CAB L E CH S E ARCH C H MEMOR Y

(CH SETTING mode)

Press VOL (+). The tuner will automatically search for the broadcasting and cable TV channels. (The CH No. will automatically increase when it appears.) If you want to stop the EZ SETUP process once it has started, press VOL (). Search will be canceled. To cancel EZ SETUP Press VOL (). Once EZ SETUP is completed, the smallest channel number memorized will be displayed.

20-22 13L-M100B/150B.p65e

4/23/99, 6:38 PM

Set Up (Continued)
L CHANNEL SETTING If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel.
Press VOL (+) or () to access SET UP mode. Press CH UP (8) or DOWN (9) to move the SETTING.

mark to CH

Press CH UP (8) or DOWN (9) to move the mark to AIR/ CABLE, then press VOL (+) or () to access AIR/CABLE mode.
Press CH UP (8) or DOWN (9) to move the desired mode.
AIR CABLE STD CABLE HRC CABLE IRC

mark to the

A I R / CAB L E AIR CAB L E CAB L E CAB L E

STD HRC I RC

(AIR/CABLE mode)
Note: Receivable channels of your TV set are: AIR channels: VHF: 2 through 13. UHF: 14 through 69.
CABLE channels: 1 (HRC and IRC mode only) 2 through 125 (STD, HRC and IRC)
20-22 13L-M100B/150B.p65e 22 4/23/99, 6:39 PM
L Saving broadcast TV channels into memory.

1.1 1.2 1.3 1.4

Press MENU to access MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the mark to SET UP. Press VOL (+) or () to access SET UP mode, then press CH UP (8) or DOWN ( 9 ) to move the mark to CH SETTING. Press VOL (+) or () to access CH SETTING screen. Press CH UP (8) or DOWN (9) to move the mark to CH SEARCH, then press VOL (+) or () to access CH SEARCH screen.

(START)

Press VOL (+). The tuner will search through all available channels in your area and add them into the TVs memory.

(STOP)

S E ARCH 12 S T ART : + S T OP :

2.2 2.3

Press VOL (). CH SEARCH will stop at the current channel and will not add any higher channels. Press MENU to exit.

(CH SEARCH mode)

Adding weak or additional channels or erasing unwanted channels from TV memory.

1.1 1.2 1.3

Press MENU to access MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the mark to SET UP. Press VOL (+) or () to access SET UP mode, then press CH UP (8) or DOWN ( 9 ) to move the mark to CH SETTING. Press VOL (+) or () to access CH SETTING mode, then press CH UP (8) or DOWN (9) to move the mark to CH MEMORY. Press VOL (+) or () to access CH MEMORY. Use CH UP (8) or DOWN (9) or REMOTE KEYPAD to select each desired channel to add or erase.

2.1 2.2

Press VOL (+) to add a channel to the TVs memory or press VOL () to erase a channel from the TVs memory.
23-25 13L-M100B/150B.p65e 23 4/23/99, 6:41 PM

VOL (+) To add channel 12 to the TV memory

C H MEMOR Y AIR 12

CH MEMOR Y AIR 12 TO ADD
(CH MEMORY unmemorized channel)
VOL () To erase channel 12 from the TV memory

ERASE :

(CH MEMORY memorized channel)
Note: If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the previously memorized channels will be lost.
L BLUE SCREEN Automatically turns the screen blue if a broadcast signal is not received.
Press VOL (+) or () to access SET UP mode.
B L UE SCRE EN L A NG U A G E C H S E T T I NG
Press VOL (+) or () to access BLUE SCREEN select mode.

S CR E E N : OF F

(BLUE SCREEN select mode)

S CR E E N : ON

Note: Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN OFF. While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the BLUE SCREEN is turned on.
23-25 13L-M100B/150B.p65e 24 4/23/99, 6:41 PM
Using the Video and Audio Input Jacks
L Connecting video equipment for playback of video material. When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen on the television screen. Connecting video device equipped with video output terminal.

CONNECTIONS

VIDEO EQUIPMENT
(Front connection terminals of TV)

CAMCORDER

To VIDEO OUTPUT To AUDIO OUTPUT

TV GAME

L To watch video material playback. Press the Remotes INPUT to select VIDEO INPUT mode to which the video equipment you want to playback is connected. The external VIDEO INPUT mode will change as follows each time the INPUT is pressed.
AIR or CABLE INPUT (Front)
INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to the lowest channel.
Note: When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the television or the equipment being connected. It is the intent of SHARP that this product be used in full compliance with the copyright law of the United States and that prior permission be obtained from copyright owners whenever necessary. For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used. The connection cords can be obtained from your local video store.

23-25 13L-M100B/150B.p65e 25 4/23/99, 6:41 PM
Before Calling for Service
Check these items and see if you can correct trouble with a slight adjustment of the controls. PROBLEM No Playback of VCR and Disk Player No Picture or Sound from External Video/Audio Products Remote Control Doesnt Work Bars on Screen Picture Distorted Picture Rolls Vertically No Color Poor Reception on Some Channels Weak Picture Lines or Streaks in Picture Ghosts in Picture Picture Blurred Sound OK, Picture Poor Picture OK, Sound Poor No Picture or Sound Dark and Blank Picture External Electrical Noise Interfering with TVs Operation X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

(Dark and Blank Picture)

4/24/99, 11:24 AM

QUICK SERVICE CHECK LIST

POSSIBLE REMEDY Try a new channel, if OK, then possible station X X X X X X X X X X X X X X X X X trouble. Is TV plugged in? Power at outlet? Is TVs POWER button on? X X X X X X X X X X X X X X X X X Is antenna connected to terminal on the back of X X X X X X X X X X X X X X X X X the set? If outside antenna is being used, check for X X X X X X X X X X X X X X X X X broken wire. Check for local interference or external electrical noise.
Turn off with POWER button and then turn it on X X X X X X X X X X X X X X X X X after about a minute. Adjust COLOR control. Adjust PICTURE control. X X X X X X X X X X X X X X X X X Check external Video/Audio products: look for loose/broken connection leads. (Refer to page X X X X X X X X X X X X X X X X X 25) Check batteries of Remote Control. Change Closed Caption mode to OFF / Energy Save mode to OFF.
Unplug the TV and plug it in again after 2 X X X X X X X X X X X X X X X X X minutes.
Note: When viewing in TEXT mode, if no TEXT broadcast is being received, the screen
may become dark and blank. Should this occur, set the Closed Caption mode to OFF.
26-28[Bk] 13L-M100B/150B.p65e 26
Antes de llamar al servicio de reparaciones
Verifique estos items para ver si usted mismo puede solucionar el problema. PROBLEMA El vdeo o el reproductor de discos de video no reproducen imgenes El equipo de video/audio externo no produce imgenes ni sonido El mando a distancia no funciona Barras en la pantella Imagen distorsionada La imagen se desplaza verticalmente No hay color Mala recepcin de algunos canales Imagen dbil Franjas en la imagen Imagen fantasma Imagen borrosa Sonido adecuado, imagen mala Sonido adecuado, sonido malo No hay imagen ni sonido Imagen oscura y en blanco Interferencia de ruido elctrico externo con el funcionamento del televisor X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

(Imagen oscura y en blanco)
LISTA DE COMPROBACIONES DE SERVICIORAPIDO
POSIBLE SOLUCIN Pruebe con otro canal y si todo est bien, el problema puede ser de la emisora. Est conectado el televisor? Llega electricidad al tomacorrientes? Est conectado el interruptor del televisor? Est conectado la antena al terminal del panel posterior del televisor? Si utiliza una antena exterior, cercirese de que el cable no est daado. Compruebe si hay interferencia local. Desconecte el interruptor POWER y vuelva a conectarlo despus de transcurrir un minuto. Ajuste el control de COLOR. Ajuste el control de MATIZ. Verifique los productos externos de Video/Audio, revise si hay gufas de conexiones sueltas o rotas. Compruebe el estado de las pilas del mando a distancia. Desactive (OFF) el modo CLOSED CAPTION / Desactive (OFF) el modo Ahorro de Energa (Energy Save) Desenchufe el televisor y vuelva a enchufarlo despes de 2 minutos.
Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la pantalla puede
ponerse en blanco y negro. Si ocurriera sto, ponga el modo CLOSED CAPTION en OFF.
26-28[Bk] 13L-M100B/150B.p65e 27 4/24/99, 11:24 AM

Calling for Service

For location of the nearest Sharp Authorized Service, or to obtain product literature accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.

Limited Warranty

CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the Product), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Model Specific Section Your Product Model Number & Description:

HAMMERHEAD GT200
Figue F1-1 F1-2 F1-3 F1-4 F1-5 F1-6 F1-7 F1-8 F1-9 F1-10 F1-11 F1-12 F1-13 F1-14 F1-15 F1-16 F1-17 F1-18 F1-19 F1-20 F1-21 F1-22 F1-23 F1-24 F4-1 F4-2 F4-3 F4-4 F4-5 F4-6 F4-7 F4-8 F4-9 F4-10 F4-11 F4-12 F4-13 F4-14 F4-15 F4-16 F4-17 F4-18 F4-19 F4-20 F4-21 F4-22 F4-23 F4-24 Part Number M200-0101 98056-57713-00 M150-1001010 M150-1001004 M150-1001005 M150-1001210 M150-1001220 M150-1001103 M150-1001201 M200-0110 M200-0111 M150-1001006 M150-B-1003075 95500-06001-KAS M200-0115 M150-1001007 M150-1003007 M200-0118 M150-1001310 M150-1001302 M150-1001303 M150-1001305 M150-1001306 M200-0124 M200-0401 M150-1003320 M150-1003014 M200-0404 M200-0405 M200-0406 M200-0407 M200-0408 M200-0409 M200-0410 M200-0411 M200-0412 M200-0413 M200-0414 M200-0415 M200-0416 M200-0417 M200-0418 M200-0419 M200-0420 M200-0421 M200-0422 M200-0423 M200-0424 Description CYLINDER HEAD SUBASSY SPARK PLUG (C7HSA NGK) CYLINDER HEAD GASKET CARBURETOR INSULATOR GASKET CARBURETOR INSULATOR PIPE COMP. IN INSULATOR BAND HEAD COVER GASKET O-RING 27X2 BREATHER TUBE STUD BOLT M6X18 STUD BOLT M6X50 FLANGE BOLT M6X25 FLANGE NUT M6-ZN. D CYLINDER HEAD COVER COMP. DOWEL PIN 10X16 CYLINDER HEAD BOLT FLANGE M6X100 IN VALVE VALVE STEM SEAL VALVE SPRING OUTER SEAT VALVE OUTER, INNER SPRING VALVE SPRING RETAINER VALVE COTTER EX. VALVE CRANKCASE ASSY. R. FRONT HANGER BUSHING CRANKCASE GASKET CRANKCASE ASSY. L. REVERSE CABLE FIX PLATE CRANKCASE SEAL WASHER 8 BOLT M812 WASHER 12 DRAIN PLUG BOLT M12 DOWEL PIN 814 STUD BOLT M8200 STUD BOLT M8209 BOLT M650 BOLT M6X20 DOWEL PIN 9X14 RUBBER TUBE CONNECTOR BOLT M752 BOLT M772 BOTL M765 BEARING 6203 BEARING 6202 BEARING 6204 OIL SEAL 20326

Page 1 of 9

F5-1 F5-2 F5-3 F5-4 F5-5 F5-6 F5-7 F5-8 F5-9 F5-10 F5-11 F5-12 F5-13 F6-1 F6-2 F6-3 F6-4 F6-5 F6-6 F6-7 F6-8 F6-9 F6-10 F7-1 F7-2 F7-3 F7-4 F7-5 F7-6 F7-7 F7-8 F7-9 F8-1 F8-2 F8-3 F8-4 F8-5 F8-6 F8-7 F8-8 F8-9 F8-10 F8-11 F8-12 F8-13 F9-1 F9-2 F9-3 F9-4 F9-5 F11-1 F11-2
M200-0501 M150-1004007 M150-1004011 M150-1004009 M150-1004013 M200-0506 M150-1040005 M150-1004008 M150-1004002 M150-1004003 M150-1004006 M150-1004001 M150-1004200 M150-1005004 M150-1005003 M200-0603 M200-0604 M200-0605 M200-0606 M200-0607 M200-0608 M150-1001007 M200-0610 M200-0701 M200-0702 M200-0703 M200-0704 M200-0705 M200-0706 M200-0707 M200-0708 M200-0709 M200-0801 M150-1009002 M200-0803 M200-0804 M200-0805 M200-0806 M150-1009103 M200-0808 M150-1009402 M150-1003075 ST3.5X13 GB845 M200-0812 M200-0813 M150-1021000 M150-1020002 M150-1020001 M200-0904 M200-0905 M200-1101 M200-1102
CRANKSHAFT & CONROD ASSY. NUT M12X1.25 WASHER 12-149HV 12-140HV LOCKING NUT WASHER KICK DRIVE GEAR WASHER 12 NUT M12 WOODRUFF KEY PISTON PIN CLIP PISTON PIN PISTON PISTON RING SET TAPPET ADJUSTING NUT TAPPET ADJUSTING SCREW VALVE ROCKER ARM EX ROCKER ARM SHAFT CAMSHAFT CHAIN CAMSHAFT COMP. 16T IN ROCK ARM SHAFT COMP. STOPPER PLATE COMP. DOWEL PIN 10X16 CAMSHAFT HOLDER LFFT CRAKCASE COVER LEFT COVER GASKET DOWEL PIN 812 HEX COLUMN STARTING MOTOR SEAL PIECE BUSHING BOLT M121.25 VENT COVER BOLT M640 FAN COVER COMP. STARTER CABLE CLAMPER CARBURETOR COOLING DUCT LOWER SHROUD LOWER SHROUD SEAL UPPER SHROUD COMP. HIGH TENSION CORD CLIP UPPER SHROUD SEAL SCREW ST4.8X16-F BOLT M6X25 SCREW ST3.513-F DUST COVER BOLT M6X14 CHAIN OIL PUMP FLANGE NUT M6 SPROCKET OIL PUMP DRIVEN BOLT M6X30 OIL PUMP SUBASSY. OIL COOLER ALUMINUM WASHER

Page 2 of 9

F11-3 F11-4 F11-5 F11-6 F11-7 F11-8 F12-1 F12-2 F12-3 F12-4 F13-1 F13-2 F13-3 F13-4 F13-5 F16-1 F16-2 F16-3 F16-4 F16-5 F16-6 F16-7 F16-8 F16-9 F16-10 F16-11 F16-12 F16-13 F17-11 F17-1 F17-2 F17-3 F17-4 F17-5 F17-6 F17-7 F17-8 F17-9 F17-10 F17-12 F17-13 F18-1 F18-2 F18-3 F18-4 F18-5 F18-6 F18-7 F18-8 F18-9 F18-10 F18-11
M200-1103 M200-1104 M200-1105 M200-1106 M200-1107 M200-1108 M150-1051200-8 M150-1051100 M150-1051100-3 M150-1051100-4 M150-1060001 M150-1060002 M150-1060003 M150-1060004 M200-1305 M200-1601 M200-1602 M200-1603 M200-1604 M200-1605 M200-1606 M200-1607 M200-1608 M200-1609 M200-1610 M200-1611 M200-1612 M200-1613 M200-1711 M200-1701 M200-1702 M200-1703 M200-1704 M200-1705 M200-1706 M200-1707 M200-1708 M200-1709 M200-1710 M200-1712 M200-1713 8.070.067-C 8.070.069-C 8.070.065-C 8.070.070 7.010.017 8.040.005 9.908.055N 8.010.047 8.010.086 9.220.008 6.000.144
OIL TUBE (1) OIL TUBE (2) HOLLOW BOLT CHAIN GUIDE PLATE CHAIN TENSIONER TENSIONER FIX BOLT STATOR COMP. FLYWHEEL COMP. COOLING FAN COMP. FLANGE BOLT M6x18 FLANGE STARTING CLUTCH STARTER REDUCTION GEAR SHAFT STARTER REDUCTION GEAR FLANGE BOLT M6X16 STARTER MOTOR ASSY. GEARBOX COVER GEARBOX COVER GASKET BEARING 6202 THIRD SHAFT BEARING 6005 OIL SEAL 30477 OUTPUT SHAFT FINAL GEAR SHAFT CIRCLIP 25 SHIFT DISC SECOND SHAFT BEARING 6301 DRIVE SHAFT REVERSE CABLE COIL PLATE LOCKING FLANGE NUT SHIFT YOKE HEAD WASHER CIRCLIP SHIFT YOKE SHIFT YOKE SHAFT SHAFT FIX BOLT FLAT WASHER 6 O-RING ( 1.5) SHAFT SPRING SHAFT WASHER (10.619.21) FLANGE BOLT M512 C.B.C. REAR CROSS BAR (CARBON) C.B.C. FRONT CROSS BAR (CARBON) C.B.C. SIDE BAR (CARBON) FRAME COMP.(B.R.S.) TUBE SEAT 25 REAR VIEW MIRROR SPRING SOCKET BOLT M8X1.25X55 R-WASHER REAR MIRROR MOUNT LOCKING FLANGE NUT M8 FRONT REFLECTOR

Page 3 of 9

F18-12 F18-13 F18-14 F18-15 F18-16 F18-17 F18-18 F18-19 F18-20 F18-21 F18-22 F18-23 F18-24 F18-25 F18-26 F18-27 F18-28 F18-29 F18-30 F18-31 F18-32 F18-33 F18-34 F18-1 F18-2 F18-3 F19-1 F19-2 F19-3 F19-4 F19-5 F19-6 F19-7 F19-8 F19-9 F19-10 F19-11 F19-12 F19-13 F19-14 F19-15 F19-16 F19-17 F19-18 F19-19 F19-20 F19-21 F19-22 F19-23 F19-24 F19-25 F19-26
6.000.084 6.000.083 6.000.102 7.020.012 6.000.009 9.108.045 9.220.008 6.000.415 9.700.004 6.000.089 6.000.090 6.000.091 6.000.232 6.000.399 6.000.400 9.106.014 8.010.049 9.090.001 7.010.034-SS 6.000.067 9.100.640 9.210.006 9.100.525 8.070.067-O 8.070.069-O 8.070.065-O 7.010.041 9.100.612 8.030.024 7.020.010-GT 6.000.122 7.010.026 9.700.020 9.700.120 9.100.825 9.400.008 6.000.093-250 4.000.008-250 9.108.025 9.900.016 4.000.008 9.200.010 7.020.002-250 8.010.157-250 6.000.062-250 9.300.010 9.400.010 9.800.010 9.500.215 4.000.054 8.020.014 9.220.008

REAR MIRROR ASSY. FOAM PADDING FRONT FENDER BRACKET,R. RUBBER FOOT PLATE HEADLIGHT UNIT FLANGE BOLT M8 x 1.25 x 45 LOCKING NUT BIKINI TOP BANJO BOLT M10x24 BRAKE HOSE ASSY. L. 34" BRAKE HOSE ASSY. R. 43" BRAKE HOSE ASSY. RR. 75" THROTTLE CABLE COMP. REVERSE CABLE COMP. PARKING BRAKE CABLE COMP. FLANGE BOLT M6X14 HEADLIGHT RUBBER MOUNTING HEADLIGHT BULB 35W/35W/ 12V FENDER, FRONT L/R FRONT FENDER BRACKET, L. BOLT M6 x 40 NYLON LOCKING FLANGE NUT M6 BOLT M5X25 C.B.C. REAR CROSS BAR (ORANGE) C.B.C. FRONT CROSS BAR (ORANGE) C.B.C. SIDE BAR (ORANGE) STEERING BOLT COVER BOLT STRAP M6x12 SPINDLE BRACKET STEERING WHEEL STEERING SHAFT BUSH. STEERING SHAFT SPECIAL WASHER 20 CIRCLIP 20 BOLT M8x25 LOCKING WASHER 8 STEERING KNUCKLE STEERING GEAR FLANGE BOLT M8x1.25x25 ROUND NUT M16x1.5 STEERING BALL JOINT NUT M10 BALL JOINT DUST COVER. L. TIE ROD ROD END FLAT WASHER 10 LOCKING WASHER 10 CASTLE NUT M10 COTTER PIN 2x15 TILT STEERING HOUSING STEERING GEAR BRACKET LOCKING FLANGE NUT. M8

Page 4 of 9

Page 5 of 9
F19-27 F19-28 F19-29 F19-30 F19-31 F19-32 F19-33 F19-34 F19-35 F19-36 F19-37 F19-38 F19-39 F19-40 F19-41 F19-42 F19-43 F19-44 F19-45 F19-46 F19-47 F19-48 F19-49 F19-50 F19-51 F19-52 F19-53 F21-1 F21-2 F21-3 F21-4 F21-5 F21-6 F21-7 F21-8 F21-9 F21-10 F21-11 F21-12 F21-13 F21-14 F21-15 F21-16 F21-17 F21-18 F21-19 F21-20 F21-21 F21-22 F21-23 F21-24 F21-25
9.708.145 8.040.001 9.108.040 9.200.008 4.000.016 9.600.515 9.300.005 9.210.005 4.000.015 9.700.624 8.010.081 9.500.212 6.000.063 9.600.306 7.010.004 8.040.007 9.708.222 6.000.076 9.108.035 7.020.036 7.020.037 8.070.044 8.010.220 7.010.092 9.108.105 7.010.003 8.010.222 2.000.064-C 7.010.017 8.080.053 9.108.020 9.220.008 6.000.145 4.000.029-C 9.108.025 8.010.034 7.020.005 9.300.008 9.210.008 6.000.046 7.020.021 7.020.031 7.020.022 6.000.056 6.000.354 6.000.376 6.000.378 6.000.377 9.700.001 9.700.002 9.700.003 6.000.379
THROTTLE PEDAL BOLT M8x1.25x145 THROTTLE PEDAL RETURN SPRING, L FLANGE BOLT M8x1.25x40 NUT M8 THROTTLE PEDAL COMP. PAN SCREW M5x15 FLAT WASHER 5 NYLON LOCKING NUT M5 BRAKE PEDAL COMP PIN 6x24 SPINDLE PIN COTTER PIN 2X12 BRAKE LAMP SWITCH ASSY. PAN SCREW M3x6 PEDAL BUSH BRAKE PEDAL RETURN SPRING, R BRAKE PEDAL BOLT M8x1.25x222 MASTER CYLINDER FLANGE BOLT M8x1.25x35 THROTTLE PEDAL PAD BRAKER PEDAL PAD MASTER CYLINDER BRACKET ADJUSTING NOB STEERING BUSHING TILT STEERING BOLTING TILT STEERING LOCKING BUSH COLLAR REAR CARGO RACK- CARBON TUBE SEAT 25 RACK SUPPORT ARM FLANGE BOLT M8x1.25x20 LOCKING FLANGE NUT. M8 FUEL TANK CAP COMP. FUEL TANK COMP.-Carbon FLANGE BOLT M8x1.25x25 TANK COLLAR RUBBER MOUNTING FLAT WASHER 8 NYLON LOCKING FLANGE NUT M8 AUTO FUEL COCK ASSY. FUEL TUBE COMP. #1 VACUUM TUBE COMP. FUEL TUBE COMP. #2 FILTER SAFETY BELT COMP. HEAD-REST SEAT COMP R. SEAT COMP. L SPECIAL BOLT, M7/16"x28 BELT WASHER 12 BELT NUT M7/16" SEAT RAIL SET.

Page 6 of 9

F21-26 F21-27 F21-28 F21-29 F21-30 F21-7 F21-1 F22-1 F22-2 F22-3 F22-4 F22-5 F22-6 F22-7 F22-8 F22-9 F22-10 F22-11 F22-12 F22-13 F22-14 F22-15 F22-16 F22-17 F22-18 F22-19 F22-20 F22-21 F22-22 F22-23 F22-24 F22-25 F22-26 F22-27 F22-28 F22-29 F22-30 F22-31 F22-32 F22-33 F22-34 F22-35 F22-36 F22-37 F22-38 F22-39 F22-40 F22-41 F22-42 F22-43 F23-1 F23-2
9.220.008 9.090.002 6.000.387 9.900.840 7.020.032 4.000.029-O 2.000.064-O 9.220.012 8.010.042 7.020.001 8.020.045 8.010.041 9.300.012 9.200.012 6.000.026 9.220.010 9.106.022 9.210.008 9.110.045 8.010.076 9.600.655 7.010.029 2.000.066 9.112.060 9.220.012 8.030.001 7.010.008 8.020.013 9.108.016 9.710.195 8.010.025 7.020.024 9.210.008 9.108.020 8.040.004 6.000.064 9.100.830 6.000.065 8.040.003 8.020.082 9.108.040 9.300.005 9.600.512 9.220.008 7.020.026 6.000.051 6.000.042 8.010.084 9.400.018 9.118.040 4.000.055 9.805.003
LOCKING FLANGE NUT M8 TAIL LIGHT BULB. TAIL LIGHT BOLT SHARP M8X1.25X40 COVER TUBE FUEL TANK COMP.-Orange REAR CARGO RACK- ORANGE LOCKING FLANGE NUT M12 ENGINE MOUNTING LINK WASHER ENGINE MOUNTING LINK CUSHION ENGINE MOUNTING LINK SPACER ENGINE MOUNTING LINK COLLAR FLAT WASHER 12 NUT M12 ENGINE MOUNTING BOLT PLATE LOCKING FLANGE NUT M10 FLANGE BOLT M6x22 LOCKING NYLON NUT M6 BOLT-WASHER M10x1.25x45 ENGINE MOUNTING BOLT PLATE COLLAR PAN SCREW M6x55 ELECTRIC ASSY. COVER REAR SWING ARM ASSY. UPPER FLANGE BOLT M12x1.25x60 LOCKING FLANGE NUT M12 SWING ARM DOG BONE CON ROD BUSH CONROD SPACER FLANGE BOLT M8x1.25x16 FLANGE BOLT M10x1.25x195 ENGINE MOUNT COLLAR REVERSE LEVER COVER LOCKING NYLON NUT M8 FLANGE BOLT M8x1.25x20 CABLE SPRING LEVER BRACKET BOLT M8x30 REVERSE, PARKING BRAKE LEVER LEVER SPRING LEVER SPACER FLANGE BOLT M8x1.25x40 FLAT WASHER 5 PAN SCREW M5x12 LOCKING FLANGE NUT M8 LEVER. GREEN / BLACK COVER CABLE ROD ADJUSTING PARKING BRAKE/REVERSE LEVER ASSY. TOW BALL LOCKING WAHSER 18 BOLT M18x40 AIR CLEANER ASSY. TAPPING SCREW M5X16
F23-3 F23-4 F23-5 F23-6 F23-7 F23-8 F23-9 F23-10 F23-11 F23-12 F23-13 F23-14 F23-15 F23-16 F23-17 F23-18 F23-19 F23-20 F23-21 F23-22 F23-23 F23-24 F23-25 F23-26 F24-1 F24-2 F24-3 F24-4 F24-5 F24-6 F24-7 F24-8 F24-9 F24-10 F24-11 F24-12 F24-13 F24-14 F24-15 F24-16 F24-17 F24-18 F24-19 F24-20 F24-21 F24-22 F24-23 F24-24 F24-25 F25-1 F25-2 F25-3
7.010.087 6.000.388 7.010.088 6.000.389 6.000.390 8.020.228 9.040.016 6.000.024 2.000.065 6.000.393 9.040.027 8.020.236 6.000.410 8.020.230 9.108.020 9.110.030 9.220.008 8.020.234 9.110.010 9.845.005 8.020.235 8.020.020 8.020.238 7.010.095 9.110.040 9.220.010 6.000.006 9.908.100 6.000.101-GT 9.210.006 9.108.045 9.906.016 7.010.031 9.908.012 6.000.068-GT 7.010.006 8.010.028 7.020.022 6.000.229 7.010.094 7.010.028 7.020.086 7.020.020 6.000.382 2.000.042-GT 9.220.012 7.020.008 9.112.060 7.010.064 9.108.022 8.010.053 9.220.008

AIR CLEANER COVER AIR CLEANER ELEMENT AIR CLEANER CASE COMP AIR CLEANER BREATHE TUBE AIR CLEANER DUCT AIR CLEANER CLAMP EX.PIPE GASKET CARBURETOR GT200 Motor SPRING MUFFLER JOINT NUT M6 MUFFLER CLAMP MUFFLER HEADER MUFFLER COMP. FLANGE BOLT M8X1.25X20 BOLT WASHER M10X1.25X30 FLANGE NUT M8 AIR FILTER MOUNTING PLATE A BOLT WASHER M10X1.25X10 TAP BOLT AIR FILTER MOUNTING PLATE B ENGINE MOUNTING PLATE PIPE CLAMP CHAIN GUARD FLANGE BOLT M10x1.25x40 LOCKING FLANGE NUT M10 CUSHION ASSY. RR BOLT STRAP M8x1.25x100 REAR FENDER BRACKET, L LOCKING NYLON NUT M6 FLANGE BOLT M8x1.25x45 FLANGE BOLT M6x16 DISC. RR COVER BOLT STRAP M8x1.25x12 REAR FENDER BRACKET, R SWING ARM BUSHING SWING ARM COLLAR RR. BRAKE PAD SET CALIPER ASSY. RR CHAIN DISC GUARD BATTERY COVER BATTERY BAND BATTERY LOWER CUSHION BATTERY (YTX12-BS) RR. LOWER SWING ARM COMP. LOCKING FLANGE NUT M12 SWING ARM CUSHION BUSHING FLANGE BOLT M12x1.25x60 REAR FENDER L/R FLANGE BOLT M8x1.25x22 BRAKE DISC. RR LOCKING FLANGE NUT M8

Page 7 of 9

F25-4 F25-5 F25-6 F25-7 F25-8 F25-9 F25-10 F25-11 F25-12 F25-13 F25-14 F25-15 F25-16 F25-17 F25-18 F25-19 F25-20 F25-21 F25-22 F25-23 F25-24 F25-25 F25-26 F25-27 F26-1 F26-2 F26-3 F26-4 F26-5 F26-6 F26-7 F26-8 F26-9 F26-10 F26-11 F26-12 F26-13 F26-14 F26-15 F26-16 F26-17 F26-18 F26-19 F26-20 F26-21 F26-22 F26-23 F27-1 F27-2 F27-3 F27-4 F27-5
8.010.231 7.060.040 8.010.077 9.108.027 9.040.006 8.030.008 9.030.006 8.020.028 9.108.040 9.040.007 9.710.031 8.010.089B 7.020.035 6.000.105 8.010.118 6.000.052-GT 9.700.016 9.800.016 9.500.430 7.020.039 6.000.383 6.000.149 9.600.308 7.050.001 7.010.093 6.000.411 6.000.159 6.000.020-J 6.000.395 6.000.396 9.100.620 9.210.006 6.000.124 6.000.035 6.000.267 9.210.005 9.600.525 6.000.025 7.010.061 9.600.615 9.300.006 9.210.005 4.000.038-GT 9.106.014 8.020.197 9.210.006 6.000.268 9.090.007 9.090.008 9.090.009 9.090.010 9.090.011
REAR AXLE DRIVE CHAIN 56 REAR SPROCKET 39TEETH FLANGE BOLT M8x1.25x27 DUST SEAL 50X34-7 AXLE BRG HOUSING COMP. RR BEARING 6206 BEARING BASE FLANGE BOLT M8x1.25x40 DUST SEAL 42X30-7 TIRE BOLT M10x1.25x31 REAR AXLE HUB TIRE. RR 21x10-10 RIM. RR CAP LUG NUT M10 REAR WHEEL ASSY. R WHEEL SPACER. RR. 16 CASTLE NUT M16 COTTER PIN 4X30 COVER. RR. HUB REAR WHEEL ASSY. L CHAIN MASTER LINK SCREW M3X8 MAGNETIC STEEL SWITCH PANEL COVER HEADLIGHT SWITCH ENGINE STOP BUTTON IGNITION START SWITCH WIRE HARNESS. SOCKET COMP BOLT M6x20 NYLON LOCKING NUT M6 REGULATE RECTIFIER COMP. STARTING RELAY C.D.I. UNIT COMP. NYLON LOCKING NUT M5 ROUND HEAD BOLT M5x25 IGNITION COIL COMP. BOLT COVER PAN SCREW M6X15 WASHER 6 NYLON LOCKING NUT M6 SPEEDOMETER BOLT M6X14 SENSOR BRACKET NYLON LOCKING NUT M6 SENSOR PARKING BRAKE LABEL REVERSE LEVER LABEL CHAIN GUARD LABEL NO LONG HAIR LABEL WARNING LABEL

Page 8 of 9

F27-6 F27-7 F27-8 F27-9 F27-10 F27-11 F27-12 F27-13 F27-14 F27-15 F27-16 F27-17 F27-18 F27-19 F27-20