Front cover Side cover Charger cleaner
TD cartridge Fusing unit release lever
Drum cartridge Transfer charger
AL-1226 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 1

3. Operation panel

Inch system
1 Exposure mode selector key and indicators Use to sequentially select the exposure modes: AUTO, MANUAL or PHOTO. Selected mode is shown by a lit indicator. Alarm indicators Drum replacement required indicator *1 Misfeed indicator TD cartridge replacement required indicator *2 SPF misfeed indicator (AL-1226) 2 Light and dark keys and exposure indicators Use to adjust the MANUAL or PHOTO exposure level. Selected exposure level is shown by a lit indicator. Use to start and terminate user program setting. SPF indicator (AL-1226)
Copy ratio display (%) key
SCANNER key and indicator *3, *4 Power save indicator Lights up when the copier is in a power save mode. Tray select key (AL-1226) Use to select a paper feed station (paper tray or bypass tray). Copy quantity keys Use to select the desired copy quantity (1 to 99). Use to make user program entries.
Copy ratio selector key and copy ratio indicators Use to sequentially select preset reduction/enlargement copy ratios. Selected copy ratio is shown by a lit indicator. Display Displays the specified copy quantity, zoom copy ratio, user program code, and error code. ONLINE key / indicator Lights up when the machine is used as a printer and scanner. *3 Paper feed location indicators Light up to show the selected paper feed station. Zoom keys / indicator Use to select any reduction or enlargement copy ratio from 25% to 400% in 1% increments. Clear key Press to clear the display, or press during a copy run to terminate copying. Press and hold down during standby to display the total number of copies made to date.
Print key and ready indicator Copying is possible when the indicator is on. Use to set a user program. Press to start copying
*1. Photoreceptor Cartridge Replacement indicator After making 17,000 copies, the indicator will be ON, and after 1,000 copier more are made, the indicator starts blinking and machine will hard-stop (after current job) until a new cartridge is installed. End life of photoreceptor cartridge displays 3-digits x 2line (total 6-digits) by pressing CLEAR key for five seconds in user simulation.
*2. Toner Developer Cartridge Replacement When toner density is lower than a specified level, the TONER DEVELOPER CARTRIDGE REPLACEMENT indicator lights up to warn the user. If the Toner Developer Cartridge is not replaced in that time, the Ready Lamp changes to blinking and then start to supply the toner after around 10 copies. (Cartridge replacement lamp continues to light.) If toner density is not back to specific level after two minutes, the READY indicator goes out and Toner Developer indicator starts blinking, and the copier stops.

Exposure (semiconductor laser) OPC layer Pigment layer Aluminum drum

3. Actual print process

Step-1: DC charge A uniform negative charge is applied over the OPC drum surface by the main charging unit. Stable potential is maintained by means of the Scorotron charger. Positive charges are generated in the aluminum layer.
Drum surface charge after the exposure OPC layer Pigment layer Aluminum layer

Non-image area

Image area
About DC5.5KV ( 580V/ 390V)
AL-1226 COPY PROCESS 6 - 2
Step-3: Developing (DC bias) A bias potential is applied to the MG roller in the two component magnetic brush developing method, and the toner is charged negative through friction with the carrier. Non-image area of the drum surface charged with negative potential repel the toner, whereas the laser exposed portions where no negative charges exist, attract the toner. As a result, a visible image appears on the drum surface.
Step-4: Transfer The visible image on the drum surface is transferred onto the print paper by applying a positive charge from the transfer corona to the backside of the print paper.
:Carrier (Magnetized particle) :Toner (Charge negative by friction) (N) (S) Permanent magnet (provided in three locations)

About DC 5.2kV

DC 400V 8V
Step-5: Separation Since the print paper is charged positively by the transfer corona, it is discharged by the separation corona. The separation corona is connected to ground. Step-6: Cleaning Toner remaining on the drum is removed and collected by the cleaning blade. It is transported to the waste toner collecting section in the cleaning unit by the waste toner transport roller.
Toner is attracted over the shadowed area because of the developing bias.
AL-1226 COPY PROCESS 6 - 3
Step-7: Optical discharge (Semiconductor laser) Before the drum rotation is stopped, the semiconductor laser is radiated onto the drum to reduce the electrical resistance in the OPC layer and eliminate residual charge, providing a uniform state to the drum surface for the next page to be printed. When the electrical resistance is reduced, positive charges on the aluminum layer are moved and neutralized with negative charges on the OPC layer.
1) Because the grid potential is at a low level, the drum potential is at about -400V. (Carrier may not be attracted though the carrier is pulled towards the drum by the electrostatic force of -400V. 2) Developing bias (-400V) is applied when the photoconductor potential is switched from LOW to HIGH. 3) Once developing bias (-400V) is applied and the photo conductor potential rises to HIGH, toner will not be attracted to the drum.

PFS ON

RRS OFF

PFS OFF

6) To release the resist roller, the tray paper feed solenoid and the resist solenoid are turned on by the paper start signal to disengage the resist start latch from the clutch sleeve, transmitting rotation of the resist drive gear to the resist roller shaft. Thus the paper is transported by the resist roller. 7) After the resist roller starts rotating, the paper is passed through the pre-transfer guide to the transfer section. Images are transferred on the paper, which is separated from the OPC drum by the drum curve and the separation section.
3) After about 0.1 sec from when the main motor start rotating, the tray paper feed solenoid (PFS) turns on for a moment. This disengages the paper feed latch from the projection of the clutch sleeve, transmitting rotation of the pick-up drive gear to the paper feed roller shaft, rotating the pick-up roller to feed the paper.

RRS ON

8) The paper separated from the drum is passed through the fusing paper guide, the heat roller (fusing section), POD (paper out detector) to the copy tray.
4) After more than half rotation of the pick-up roller, the paper feed latch is brought in contact with a notch on the clutch sleeve, stopping rotation of the pick-up roller. AL-1226 OPERATIONAL DESCRIPTIONS 7 - 5
(2) Manual multi paper feed operation
1) Before paper feed operation, the manual paper feed solenoid (MPFS) is turned OFF as shown in the figure below.
3) When pawl C of the manual paper feed clutch sleeve is engaged with the manual feed latch, the manual feed stopper falls and the manual take-up roller rises. At that time, the manual paper feed roller is rotating.

OFF MPFS

2) When the PRINT button is pressed, the manual paper feed solenoid (MPFS) turns on to disengage the manual paper feed latch. A from the manual paper feed clutch sleeve A, rotating the manual paper feed roller and the manual take-up roller. At the same time, the manual paper feed stopper opens and the manual take-up roller is pressed to the surface of the paper to start paper feeding.

ON MPFS

4) The lead edge of the transported paper is pressed on the resist roller by the transport roller. Then the paper is stopped temporarily to allow synchronization with the lead edge of the image on the OPC drum. From this point, the operation is the same as the paper feed operation from the tray. (Refer to A-5 - 8.) 5) The solenoid turns off to close the gate and return to the initial state.

1) 1) 2)

1) 1) 1)
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 7
5) Remove the PWB insulation mylar and remove the paper transport detection sensor (PPD2).
7) Remove two springs and open the intermediate frame unit.
6) Remove two screws and remove the toner motor.
8) Remove the pulleys on the both sides and remove the paper exit roller.
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 8
9) Pull out the paper exit roller knob and remove the belt.
11) Remove the paper exit roller.
12) Remove the harness guide. 10) Release the belt pulley (a) lock and remove the belt pulley bearing.
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 9
13) Remove five screws and remove the main drive plate and the belt.
15) Remove six screws and remove the LSU unit.
The scan inclination classification is indicated on the right or the left of the LSU production number label according to the classification. When replacing the LSU, add the spacer according to the scan inclination classification. (The spacer is packed together with every LSU.) Scan inclination classification check Scan inclination classification 1: +0.26 +0.5 (White marking on the right of the production number label) Scan inclination classification 2: 0.25 +0.25 (White marking) 14) Remove the parts as shown below, and remove the pressure release solenoid and the paper feed solenoid. Scan inclination classification 3: 0.5 0.26 (White marking on the left of the production number label)
CAUTION:Attach the gears securely
LSU spacer not required Machine front side Add one LSU spacer. Machine rear side Add one LSU spacer.

1) 4) 2) 3)

AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 10
Addition of the spacer Scan inclination classification 1: Add the LSU spacer to the rear side of the machine. Scan inclination classification 2: No need to add the spacer. Scan inclination classification 3: Add the LSU spacer to the front side of the machine.
[Note for assembling the LSU] When installing the LSU, turn the LSU clockwise and fix with screws in order to provide an attachment backlash in the proper direction. Observe the following sequence of fixing screws.
<Machine rear side> Fit the holes and attach.
Insert into the positioning boss.
16) Remove each pawl, and remove the paper exit tray.
<Machine front side>
Fit the holes and attach. 3) Insert into the positioning boss. 1)

Machine front side

AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 11
17) Remove two screws and remove the fusing connector. 18) Remove five screws and the connector, and lift the intermediate frame unit to remove.
21) Remove three screws and remove the TC front paper guide.
22) Remove the screw and the connector, and remove the PPD1 sensor PWB.
19) Remove the screw and the E-ring, and remove the PS semi-circular earth plate and the PS roller unit. 20) Remove the E-ring and remove the spring clutch from the PS roller unit.

PS roller unit

PS semi-circuler semi-circular earth plate
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 12
23) Remove two E-rings and remove the paper feed roller. 24) Remove three E-rings and remove the clutch unit.
Single unit 1) Remove the screw and remove the single upper cover.

Clutch unit

Paper feed roller
2) Remove the screw and remove the side door detection unit.
6. Manual paper feed section
No. Part name Ref. Manual transport roller Cassette detection switch PPD1 sensor PWB Side door detection unit

Wire treatment

AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 13
3) Remove three screws and remove the single manual feed upper frame.
5) Remove the E-ring and remove the manual paper feed transport roller.
6) Remove the cassette detection switch.
4) Remove the PPD1 sensor PWB.
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 14
7) Remove the multi cover.

Multi cover

Multi unit 1) Remove the screw and remove the multi upper cover.
3) Remove three screws and remove the multi paper feed upper frame.
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 15
4) Remove two screws and remove the multi feed bracket unit from the multi paper feed upper frame.
6) Remove the pick-up roller.

2) 1) 1)

7) Cut the binding band and remove the multi paper feed solenoid.
Remove three E-rings and remove the manual paper feed roller B9.

1) 3) 2)

Multi paper feed solenoid

L O CK

AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 16
D. Pressure plate holder attachment
1) Attach the pressure plate holder so that the resin section is not covered with the seal M1-N.
2) Disconnect the connector. 3) Remove two screws, and remove the scanner motor.

Seal M1-N

Pressure plate holder Attachment reference

Attachment reference

4) Remove two screws and one harness, and remove the main motor.

7. Rear frame section

No. Part name Ref. 1 Mirror motor 2 Main motor 3 Exhaust fan motor
5) Remove two screws and one connector, and remove the exhaust fan motor.
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 17

8. Power section

No. Part name Ref. 1 Noise filter PWB 2 Power PWB
9. SPF section (SPF model only)
No. A B C D E F G H I Part name Ref. Sensor PWB Pickup solenoid Clutch Manual paper feed roller, pickup roller Belt SPF motor Paper entry sensor PS roller Paper exit roller
Noise filter PWB 1) Disconnect the connector at two positions. 2) Remove the screw, and remove the noise filter PWB unit.

2) 1) 3) 1)

Pickup unit removal 1) Remove three fixing pawls from the bottom of the machine. 2) Remove the front cover and the rear cover.

Power PWB 1) Disconnect each connector. 2) Remove the screw, and remove the earth line. 3) Remove two screws, and remove the power PWB unit. 1) Remove the belt, the paper feed frame Spring, and two harnesses. 2) Remove the pickup unit.

4) 1) 2) 3) 1)

* When installing the parts, be careful of the hole position of the paper frame Spring.
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 18

A. Sensor PWB

1) Remove two screws from the bottom of the pickup unit. 2) Remove the upper cover.

C. Clutch

1) Remove the E-ring. 2) Remove the pulley and bush. 3) Slide the bush in the arrow direction. 4) Lift the clutch, and 5) remove the clutch.
1) Remove two screws. 2) Remove the sensor PWB. 3) Remove the harness.

1) Remove the E-ring.

2) Remove the parts.

B. Pickup solenoid

1) Remove two screws. 2) Remove the pickup solenoid
* When installing, hang iron core A on the solenoid arm. AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 19
D. Manual paper feed roller, pickup roller
1) Lift the paper stopper. 2) Slide the take-up roller unit. 3) Slide the bushing in the direction of the arrow. 4) Remove the take-up roller unit.

E. Belt

1) Remove the belt.
* When installing the take-up roller, hang the projection of the take-up roller unit on the solenoid arm. 1) Remove the parts. 2) Remove the manual paper feed roller. 3) Remove the pickup roller. 4) Remove the parts.

F. SPF motor

1) Remove the harness. 2) Remove four screws. 3) Remove the drive unit. 4) Remove the belt. 5) Remove two screws. 6) Remove the SPF motor.
Transport unit removal 1) Remove two screws. 2) Remove the document tray unit. 3) Remove five screws. 4) Remove the transport unit.
AL-1226 DISASSEMBLY AND ASSEMBLY 8 - 20

G. Paper entry sensor

1) Loosen the screw. 2) Open the paper exit paper guide. 3) Remove the paper entry sensor. 4) Remove the harness.

8) Set the adjustment mode to Manual with the copy mode select key. 9) Enter the new set value of main scanning direction copy magnification ratio with the copy quantity set key, and press the COPY button. 10) Change the set value and repeat the adjustment until the ratio is within the specified range. When the set value is changed by 1, the magnification ratio is changed by 0.1%.
(3) Sub scanning direction copy magnification ratio
2) Set the copy magnification ratio to 100%. 3) Make a copy on A4 or 81/2" x 11" paper. 4) Measure the length of the copied scale image. a. Cases when the adjustment is required 1) When the scanner unit drive section is disassembled or the part is replaced. 2) When the main PWB is replaced. 3) When the EEPROM in the main PWB is replaced. 4) When "U2" trouble occurs. b. Necessary tools Scale
AL-1226 ADJUSTMENTS 9 - 1
c. Adjustment procedure 1) Set the scale on the document table as shown below. (Use a long scale for precise adjustment.)
B. Image position adjustment
There are following five kinds of image position adjustments, which are made by laser control except for the image scan start position adjustment. For the adjustments, SIM 50 - 01, 50 - 10, 50 - 18 and SIM 50 - 19 are used. No. 7 Adjustment item Print start position Image lead edge void amount Image scan start position Image rear edge void amount SPF image scan start position Center offset Memory reverse position adjustment in duplex copy Simulation 50 - - - - - - - 18
To select the adjustment mode with SIM 50 - 01, use the copy mode select key. The relationship between the adjustment modes and the lighting lamps are as shown in the table below. Adjustment mode Lamp ON
Print start position (Main cassette paper AE, main cassette lamp feed) 2) Set the copy magnification ratio to 100%. 3) Make a copy on A4 or 81/2" x 11" paper. 4) Measure the length of the copied scale image. 5) Calculate the sub scanning direction copy magnification ratio using the formula below. = Copy image dimensions Original dimension X 100 (%) Print start position (2nd cassette paper feed) Image lead edge void quantity Image scan start position Image rear edge void quantity SPF image scan start position AE, 2nd cassette lamp
Print start position (Manual paper feed) AE, manual feed lamp TEXT lamp PHOTO lamp AE, TEXT, PHOTO lamp AE, TEXT lamp
: Supported for the installing model and skipped for non-installing mode. To select the adjustment mode with SIM 50 - 10, use the copy mode select key.

Original (Scale)

HARDDENCD STAINLESS
The relationship between the adjustment modes and the lighting lamps are as shown in the table below. Machine with the multi manual paper feed unit

Adjustment mode

Lamp ON
Print center offset (Main cassette paper AE, main cassette lamp feed) Print center offset (Manual paper feed) AE, manual paper feed lamp OC/document center offset AE, TEXT lamp

Enter the new main code.

The main code is displayed on the COPY QUANTITY display.
All displays on the operation panel go off, and the machine enters the ready state for entering the main code.
The entered value is registered. Press the clear key.
AL-1226 SIMULATION, TROUBLE CODES 10 - 1

2. List of simulations

Sim No. Kind of main code Optical system SPF Individual load operation Lamp ON check Sub code Machine individual load operation Aging High voltage output check 22 Other Trouble reset U2 trouble reset Counter display Operation Mirror scan operation Aging of mirror scanning SPF sensor status display Motor ON Paper feed solenoid ON Operation panel display check Fusing lamp, cooling fan operation check Copy lamp ON Paper feed solenoid ON Resist solenoid ON Warm-up display and aging with jam Intermittent aging Developing bias Main charger (Grid high) Grid voltage (Low) Transfer charger 30 Sensor operation check (Standard provision) Fusing temperature setup Sim No. 26 Kind of main code Various setup Sub code 40 Operation Manual feed setup (R) SPF setup Second cassette setup Machine duplex setup Destination setup Machine conditions check Rear edge void setup CE mark support control ON/OFF Cancel of stop at drum life over Memory capacity check Polygon motor OFF time setup (Time required for turning OFF after completion of printing) Transfer ON timing control setup Side void setup SPF document rear edge read setup Energy-save mode copy lamp setup Fan control select setup Paper sensor status display
None Toner motor aging None Cancel of troubles other than U2 None Cancel of U2 trouble JAM total counter display Total counter display SPF counter display Drum counter display P-ROM version display Copy counter display Printer counter display Scanner mode counter display Scanner counter display SPF JAM counter display JAM total counter clear SPF counter clear Drum counter clear Copy counter clear Printer counter clear Scanner counter clear SPF JAM total counter clear Scanner mode counter clear Main motor operation check (Cooling fan motor rotation check) Polygon motor ON
Fusing temperature setup (Normal copy) Fusing temperature setup 2 Fusing temperature setup in duplex copy Setup of fusing control of postcard size paper Copy density adjustment (300dpi) Copy density adjustment (600dpi) Image contrast adjustment (300dpi) table setup or AE operation mode setup SPF exposure correction Image contrast adjustment (600dpi) Image sharpness adjustment Copier color reproduction setup Front/rear (main scanning) direction and scan (sub scanning) direction magnification ratio adjustment Flash ROM program writing mode Lead edge image position Center offset adjustment Resist quantity adjustment SPF scan position automatic adjustment Polygon motor check (HSYNC output check) Shading check Self print

AL-1226 SIMULATION, TROUBLE CODES 10 - 4
Main Sub Content code code JAM total counter clear When the PRINT switch is pressed, the JAM total count value is reset to 0. 04 SPF counter clear When the PRINT switch is pressed, the SPF count value is reset to 0. 07 Drum counter clear When the PRINT switch is pressed, the drum count value is reset to 0. 08 Copy counter clear When the PRINT switch is pressed, the copy count value is reset to 0. 09 Printer counter clear When the PRINT switch is pressed, the printer count value is reset to 0. 13 Scanner counter clear When the PRINT switch is pressed, the scanner count value is reset to 0. 14 SPF JAM total counter clear When the PRINT switch is pressed, the SPF JAM total count value is reset to 0. 15 Scanner mode counter clear When the PRINT switch is pressed, the scanner mode counter is reset to 0. Main motor operation check (Cooling fan motor rotation check) When the PRINT switch is pressed, the main motor (as well as the duplex motor in the duplex model) is operated for 30 sec. If the developing unit is installed at that time, the developing bias, the main charger, and the grid are outputted together in order to avoid toner consumption. Since, in this case, laser discharge is required when stopping the motor, the polygon motor is rotated at the same time. If the developing unit is not installed, the above high voltage is not outputted and only the motor is rotated. : Do not execute this simulation by forcibly turning ON the door ON/OFF switch. 10 Polygon motor ON (Operation/Procedure) When the START key is pressed, the polygon motor is operated for 30 sec. Manual feed setup (Operation/Procedure) 1. When this simulation is executed, the currently set bypass code number is displayed. 2. Enter the code number corresponding to the bypass and press the START key, and the setting will be changed. Code number 02 Bypass Single bypass Multi bypass
(R) SPF setup When this simulation is executed, the current setup of the SPF code number is displayed. Enter the code number corresponding to the SPF and press the PRINT switch to enable the setup. Code number 2 SPF SPF not installed SPF installed RSPF installed
Second cassette setup (Operation/Procedure) 1. When this simulation is executed, the currently set code number of the second cassette is displayed. 2. Enter the code number and press the start key. The setting is changed. Code number Second cassette Without second cassette With second cassette

AL-1226 ELECTRICAL SECTION 12 - 8
[When the heat roller surface temperature is lower than the set level] 1) Since the thermistor terminal voltage is higher than the set level, the HL signal from the CPU becomes HIGH. 2) The HL signal is turned to be the HLOUT signal through IC124 protect circuit, and inputted to the photo triac coupler on the power PWB. 3) When the internal triac turns on, a pulse is applied to the gate of the external triac. Consequently a current flow from the power source through the heater lamp to the triac, lighting the heater lamp. [When the heat roller surface temperature is higher than the set level] 1) Since the thermistor terminal voltage becomes lower than the set value, the HL signal from the CPU becomes LOW. 2) The HL turns LOW, the photo triac coupler on the power PWB turns OFF, the external triac turns OFF, and the heater lamp turns OFF. [In case of the thermistor open] The voltage at IC120 6pin over the voltage at 5pin to drive the output THOPEN at 7pin to LOW. This is passed to the CPU and the trouble code "H2" is displayed.
(5) Driver circuit (Solenoid)
a. Outline Since the load signal from the CPU or the ASIC cannot drive the load directly, it is passed through the driver IC to drive the load. b. Operation The driver circuit forms a Darlington circuit with transistors. Therefore a large drive current is obtained from a small current (ASIC output current). When the driver input voltage (base resistance input) is HIGH (+3.3V), the transistor turns ON to flow a current in the arrow direction, operating the load. When the driver is ON, the driver output terminal voltage is 0V.
ASIC/CPU OUT PUT LOAD LOAD
(6) Toner supply motor drive circuit
The IC129 is the motor control IC, which generates the pseudo AC waveform with the pulse signals (TM, TM-) outputted from ASIC, driving the toner supply motor.

C212 10u/35V

C213 0.1u/50V
PGND IC129 R187 1kJ (4-D3) (4-D3) (TM) (TM_) R204 47kJ R205 47kJ R188 1kJ 13 Vcc PSAVE VM Rin OUT1 Fin OUT2 VREF RNF NC GND NC FIN NC NC NC NC NC NC NC NC NC NC NC NC NC BA6920FP FIN 15 14

TMB_O TMA_O

(9-A1) (9-A1)
(7) Main motor drive circuit
The main motor is driven by the MMD signal from ASIC. While the main motor is rotating, the MMD signal is driven to HIGH and passed through IC125 to the control circuit in the main motor to rotate the main motor. When the main motor speed reaches the specified rpm, the MMLD signal is turned LOW and passed through IC115 to the CPU.

ASIC MMLD

IC8 I1 O1 I2 O2 I3 O3 I4 O4 I5 O5 I6 O6 I7 O7 COM NC TD62503F 10 9
Control Circuit ( Main Motor)
AL-1226 ELECTRICAL SECTION 12 - 9
(8) Mirror motor control circuit, Duplex motor control circuit
Stepping motors are employed for the mirror motor, the SPF motor, and the duplex motor. The driver for IC127 (for mirror motor) is the bipolar drive L6219DS, and the driver for IC128 (for SPF) is the unipolar drive IC MTD1361F. For control, the SPF outputs the drive signal from the CPU to the IC, and the mirror outputs the drive signal to the IC with the ASIC. They drive each motor in 1-2 phase excitement or 2phase excitement. Each motor switches the motor current value in each magnification ratio. SPF motor drive circuit

TM MIRON

(5-A2) SGS SRRC (5-A2) SPUS (5-A2) SPFS (5-A2) MRPS1 (5-B2) MRPS2 (5-B2) (4-C3) OP_LATCH (4-C3) OP_DATA

(4-C3) (5-B3)

OP_CLK VFMCNT
(5-B3) (5-B4) (5-B4) (5-B4) (5-B2) (5-B1) (5-B4) (5-B2) (5-B1)

(5-B3) (5-B3) (5-B3)

(5-B3) (5-B3) (5-B2)

(4-C3)

(4-C3) (4-C2)

(4-C2) (4-C2)

SPFON MIRCNT
AL-1226 CIRCUIT DIAGRAM 13 - 2

Jaguar ASIC without PCI

D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D5 D3 D2 D1 D0 A9 A256 GND(PLL) VCC(PLL) GND(PLL) VCC(PLL) VCC(CORE/DC) MTR_Y1 MTR_PHASE1 GND(CORE/DC) MTR_I01 MTR_I11 MTR_I21 MTR_PHASE2 VCC(CORE/DC) MTR_I02 MTR_I12 MTR_I22 MTR_Y2 VCC(AC) SYNC# LD# GND(AC) LEND# CPUWR# CPURD# SCANSP SCANST# TRANSST# PRINTST# TMEN TESTPIN4 VCC(CORE/DC) TESTPIN3 TMCLK GND(CORE/DC) TESTPIN2 TESTPIN1 TESTPIN0 CPU_DATA15 CPU_DATA14 CPU_DATA13 CPU_DATA12 CPU_DATA11 CPU_DATA10 VCC(AC) CPU_DATA9 CPU_DATA8 GND(CORE/DC) CPU_DATA7 CPU_DATA6 CPU_DATA5 CPU_DATA4 VCC(CORE/DC) CPU_DATA3 CPU_DATA2 CPU_DATA1 CPU_DATA0 VCC(AC) CPUCS# MEM_INTR GND(AC) ARB_INTR CPU_SYNC# CPU_AD8 CPU_AD7 VCC(AC) RAM_WDE# RAM_CKE RAM_CLK GND(AC) RAM_DATA8 RAM_DATA9 VCC(CORE/DC) RAM_DATA10 RAM_DATA11 GND(CORE/DC) RAM_DATA12 RAM_DATA13 VCC(CORE/DC) RAM_DATA14 RAM_DATA15 RAM_DATA7 GND(CORE/DC) RAM_DATA6 RAM_DATA5 VCC(AC) RAM_DATA4 RAM_DATA3 GND(AC) RAM_DATA2 RAM_DATA1 RAM_DATA0 GND(CORE/DC) VCC(CORE/DC) PFCLK GND(PLL) VCC(PLL) GND(PLL) VCC(PLL) TM2_15M VPOUT VMOUT OEN RCV VPIN VMIN SUSPEND IE1284_PARAD0 GND(AC) IE1284_PARAD1 IE1284_PARAD2 VCC(AC) IE1284_PARAD3 IE1284_PARAD4 IE1284_PARAD5 IE1284_PARAD6 IE1284_PARAD7 IE1284_REV# IE1284_FAULT# IE1284_ACK# IE1284_BUSY GND(CORE/DC) IE1284_PE IE1284_SLCT VCC(CORE/DC) IE1284_INIT IE1284_SLCTIN# IE1284_AUTOFD# IE1284_STB# BR4 BR4 BR4 BR4 BR151 33J 33J 33J 33J HG73C119HF JTG_TMS JTG_TCK CPUNRST /ASIC_RST JTG_TDI (9-B2) (9-B2) (1-B1) (1-B1) (9-B2)

C168 0.1u

(1-D2) D[15.0]
GND OSC-11 13.9867MHz RCV VPIN VMIN SUSPEND

C169 22000p

(9-A2) /VIDEO

R120 100J 1

C170 0.1u
VPOUT VMOUT OEN RCV VPIN VMIN SUSPEND (8-B2) (8-B2) (8-B2) (8-B2) (8-B2) (8-B2) (8-B2) VCC3 PARAD0 PARAD1 PARAD2 PARAD3 PARAD4 PARAD5 PARAD6 PARAD7 REV FAULT /REV /FAULT (8-B2) (8-B2) PARAD[7.0] (8-A2) ACK BUSY PE SLCT INIT SLCTIN AUTOFD STB /ACK BUSY PE SLCT /INIT /SLCTIN /AUTOFD /STB (8-B2) (8-B2) (8-B2) (8-B2) (8-B1) (8-B1) (8-B1) (8-B1)

R122 10kJ

R123 10kJ

R124 10kJ

R125 10kJ

R126 10kJ

VPOUT VMOUT RCV VPIN VMIN SUSPEND PARAD0 PARAD1

C306 1000p

C305 1000p

AL-1226 CIRCUIT DIAGRAM 13 - 10
R304 1.5KJ R359 1.5KJ R335 150J R340 R351 150J R360 1KJ 150J R338 1KJ 6 1KJ 1KJ IC301 D0 D1 D2 D3 D4 D5 D6 D12 R318 R322 R336 R302 R319 R327 R324 R321 100J 100J 100J 100J 100J 100J 100J 100J R357 R308 R312 R313 R314 R310 R309 R317 1KJ R352 VCC D0 D1 D2 D3 D4 D5 D6 D7 100J 100J 100J 100J 100J 100J 13 12
D-GND DRST 5V PSW KIN2 KIN1 OP-STB OP-CLK OP-LATCH OP-DATA SELIN1 SELIN2 SELIN3 D-GND 5VEN PSL ONL D-GND

EXDWK +5V EXMODK

3. I/F PWB

R430 3.3V1

R429 10kJ 100p C426 D402 ZENER_6.2V ICA VCC B 3 GND Y 4 R428 10kJ 0.1u NC7S08M5 C420

C402 3.3V1

47u/16V 3.3V1
5V2 R423 1.5kJ R403 R402 C403 0.1u 24J 24J L403 L404 N.M. N.M. N.M.(1.5kJ) R404 CN+5V 2 D3 D+ 4 GND Shield USB_CN

D401 5V1

11EQS06
L401 IC401 USB_Transceiver 3.3V1 C421 0.1u
7 NC VCC OE# VMO RCV VPO VP D+ VM DSUSPEND SPEED GND NC

C401 +

47u/16V

L405 beads F.G

3.3V1 IC18 Vcc Vcc A8 A7 A6 A5 A4 A3 A2 A1 B8 B7 B6 B5 B4 B3 B2 B41 Vcc-cable Vcc-cable R406 R407 R408 R409 R410 R411 R412 R413
22J 22J 22J 22J 22J 22J 22J 22J
C404 C405 C406 C407 C408 C409 C410 C411 100p 100p 100p 100p 100p 100p 100p 100p
6 A9 A10 A11 A12 A13 A14 A15 A16 A17 C14 C15 C16 C26 Y9 Y10 Y11 Y12 Y23 R426 R425 PLH HLHin R424 10kJ GND GND GND GND 74LVX161284 10kJ HD DIR PLHin HLH 10kJ

5V2 R420

Shield
3.3V 5VEN 5VEN USB_IN D_CONT VPO VMO OEN RCV VPIN VMIN SUSPEND PARAAD0 PARAAD1 PARAAD2 PARAAD3 PARAAD4 PARAAD5 PARAAD6 PARAAD7 REV /FAULT /ACK BUSY PE SLCT /INTI /SLCTIN /AUTOFD /STB IF_DET
/D STB Data 0 Data 1 Data 2 Data 3 Data 4 Data 5 Data 6 Data 7 /ACK BUSY PE SLCT /AUTO FD NC SG FG PLHOUT
D-GND D-GND D-GND D-GND D-GND D-GND D-GND D-GND D-GND D-GND D-GND D-GND /INIT /FAULT D-GND NC HLHIN /SLCT IN
AL-1226 CIRCUIT DIAGRAM 13 - 11
R414 R415 R416 R417 R421 22J 22J 22J 22J 22J C412 C413 C414 C415 C418

35FE-BT-VK-N

IEEE1284_CN F.G
3.3V1 C425 C427 C423 0.1u 0.1u 0.1u 0.1u C424

100p 100p 100p 100p 100p

R405 R418 R419 R422

22J 22J 22J 22J

C422 C416 C417 C419 100p 330p 100p 100p

R427 R401

10kJ N.M.

4. POWER SUPPLY

POWER SUPPLY (220V/240V)

5. NOISE FILTER CIRCUIT

AL-1226 CIRCUIT DIAGRAM 13 - 12

H 10 11

AL-1226 CIRCUIT DIAGRAM 13 - 13

6. ACTUAL WIRING DIAGRAM

ACTUAL WIRING DIAGRAM 1/7
Paper out detecter Resist roller Solenoide Cassette paper Solenoide Cassette detect 2nd cassette

PARTS GUIDE

CODE:00ZAL1226//P1
DIGITAL LASER COPIER/PRINTER

AL-1217 MODEL AL-1226

(AL-1226)

CONTENTS

9 F G H I J K L
Exteriors Original cover unit (AL-1217) SPF exteriors (AL-1226) SPF transport unit (AL-1226) SPF pick up unit (AL-1226) Operation panel Side door unit Optical frame LSU unit Delivery paper guide unit Middle frame Base plate unit 1 Base plate unit 2 Fusing unit Drive unit Single manual paper feeding cover unit (AL-1217)

M N O P Q R S T U V W X

Multi manual paper feeding cover unit (AL-1226) Single manual paper feeding unit (AL-1217) Multi manual paper feeding unit (AL-1226) Socket holder unit TC case unit 250 sheets tray Harness Packing material & accessories Operation PWB MCU PWB IF PWB DC power supply PWB Index
Because parts marked with "!" is indispensable for the machine safety maintenance and poeration, it must Be replaced with the parts specific to the product specification.

SHARP CORPORATION

This document has been published to be used for after sales service only. The contents are subject to change without notice.

DEFINITION

The definition of each Rank is as follows and also noted in the list A: Parts necessary to be stocked as High usage parts. B: Parts necessary to be stocked as Standard usage parts. C: Low usage parts. D: Parts necessary for refurbish. E: Unit parts recommended to be stocked for efficient after sales service. Please note that the lead time for the said parts may be longer than normal parts. S: Consumable parts. Please note that the following parts used in Copier under the same description are classified into A or B Rank depending upon the place used. Example : Gear made of Metal, Sprocket, Bearing, Belt made of Rubber, Spring clutch mechanism. ARank : The parts which may be with the revolution or loading. BRank : Parts similar to A Rank parts, but are not included in Rank A. Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with the parts specific to the product specification. F Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model. F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order. F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.

1 Exteriors

31 501

PARTS CODE

CCAB-0003QS22 LSOU-0001QSJZ XEBSE30P08000 LSOU-0008QSJZ XEBSE40P12000 PTPE-0041QSZZ DHAI-0285QSZZ PSHEZ0369QSZZ XBBSE30P08000 GCAB-0061QSZZ TLABH0387QSZZ GCOV-0045QSZZ GCOV-0045QSZ1 CFIX-0021QS01 PGLSP0007QSZZ PTPE-0040QSZZ PCOVP0040QSJZ GCAB-0062QSZ1 GCAB-0062QSZZ GCAB-0004QSJ1 GCAB-0026QSJ2 TCAUA0770FCZZ PMLT-0024QSZZ PFILZ0002QSZZ PTPE-0044QSZZ PGLSP0008QSZZ PSHEZ0181QSJZ PTPE-0010QSZZ TLABZ0058QSZZ PMLT-0069QSZZ PSHEZ0404QSZZ PTPE-0047QSZZ PTPE-0048QSZZ PTPE-0049QSZZ CFIX-0021RS51
PRICE NEW RANK MARK AS AY AA AH AA AB AK AE AA AK AF AG AG AG AV AC AL AL AL AX AZ AB AC AL AC AH AC AC AD AA AF AC AA AC N BB
PART RANK D D C D C C C C C D C D D D B C D D D D D D C D C B C C D C C C C C E

DESCRIPTION

Front cover Delivery tray Screw(38) Extension tray Screw(412) Glass fixing tape B OP-MCU harness Shading sheet Screw(38) Left exterior Operation instruction label Rear cover SPF Rear cover OC Glass fixing plate Table glass Glass fixing tape A Rear exterior cover SPF Right exterior OC Right exterior Rear exterior Rear exterior SPF Service caution label Fan cushion Ozone filter Slit glass tape SPF glass Rear cabinet maylar Slit glass tape Class 1 label Ground malt Right cabinet ground sheet Ground tape F Ground tape R Right cabinet ground tape Table unit

(AL-1226) (AL-1217)

(AL-1226) (AL-1217) (AL-1226) (AL-1217) (AL-1226)
(AL-1226) (AL-1226) (AL-1226) (AL-1226) (AL-1226) (AL-1226) (AL-1226) (AL-1226) (AL-1226)

AL-1217

AL-1226

PRP01022

2 Original cover unit (AL-1217)
GCOVH0003QSJZ GCOVH0004QSJ1 PCUSS0024QSZZ (Unit) 901 C C O V H R S 5 4
PRICE NEW RANK MARK AL AX N AV BF
PART RANK D OC cover S D OC cover M D OC mat E OC cover unit

3 PRP01023

3 SPF exteriors (AL-1226)
LSOU-0035QSZZ LPLTP0011QSJZ LPLTP0012QSJZ NGERR0377FCZZ XEPSD30P08X00 NGERH0193FCZZ MSPRP0059QSZZ CFRM-0011RS58 XEBSD40P10000 CFRM-0013RS59 LBNDJ0013FCZ1 PSHEZ0384QSZZ PSHEP0063QSZZ MSPRP0113QSZ1 PSHEZ0379QSZZ XEBSD30P08000 MHNG-0017QSZZ XEBSE40P14000 NROLP0011QSZZ PSPO-0001QSZZ NSFTZ0010QSZZ MSPRT0061QSZZ MSPRP0060QSZZ NROLP0010QSZZ NSFTZ0009QSZZ LPLTM0096QSZZ LX-BZ0016QSZZ LSOU-0005QSJ4 PCUSS0025QSZZ PSHEZ0102QSZZ PSHEZ0112QSZZ MSPRC0149QSZZ PSHEZ0386QSZZ PSHEZ0387QSZZ PSHEZ0388QSZZ PSHEZ0383QSZZ CSOU-0035RS51 (Unit) 901 D U N T - R S 2 0

PRICE NEW RANK MARK AR AH AH AD AA AB AD BF AA BP N AA AD AC AD AD AA AQ AA AD AB AE AC AD AD AE AF AC BA AQ AD AE AC AB AB AD AC AZ BX N
PART RANK D C C C C C C E C E C C C C C C C C C C C C C C C C C D D C C C D D C C E E
Original tray Control plate F Control plate R Manual feeding rack gear Screw(38X) Manual feeding gear Control plate spring SPF pick up unit Screw(410) SPF transport unit Wire band Base tray sheet Transport sheet Earth spring OC sheet Screw(38) SPF hinge Screw(414) Delivery roller Sponge Delivery shaft Delivery spring Transport spring Transport roller Transport shaft Base tray reinforce plate Screw(38) Base tray OC mat Motor pressure sheet Delivery earth sheet SPF PS earth spring SPF Rear side mylar A Rear side mylar B OC sheet mylar 2 Book detect sheet SPF original tray unit SPF unit

PRP01024

4 SPF transport unit (AL-1226)
PGIDM0042QSJZ XEBSD30P12000 LX-BZ0012QSZZ NGERH0972FCZZ MARMP0001QSZZ XBPSD30P05K00 RMOTP0013QSZZ DHAI-0290QSZ1 LBNDJ0013FCZ1 MSPRT0064QSZ1 LFRM-0013QSZZ XRESP50-06000 PSHEP3029FCZZ NBLTT0006QSZZ NGERH0047QSZZ LPINS0019QSZZ NBRGC0017QSZZ NBRGM0501FCZZ LFRM-0012QSZZ PSHEZ0039QSZZ LPLTP0013QSZZ MSPRC0062QSZZ MSPRP0065QSZZ PSHEZ2174FCZZ NPLYZ0146FCZZ NBLTT0003QSZZ JKNBZ0004QSZZ MSPRC0063QSZZ PGIDM0024QSZ3 RDTCT0004QSZZ NROLM0023QSZ1 PBRSR0003QSZ2 PGIDH0029QSZZ PSHEP0044QSZZ NROLM0022QSZ1 PCOVP0037QSJZ PCOVP0038QSJ1 XEBSE30P10000 CPLTM0298QS01 MSPRT0294QSZZ (Unit) 901 C F R M - R S 5 9
PRICE NEW RANK MARK AL AA AC AB AF AA BB AN AA AC AG AA AA AG AF AB AC AB AD AG AD AC AD AB AB AG AD AB AN AL AP AG AL AF AL AH AL AA AF AC BP N
PART RANK C C C C C C B C C C C C C B C C C C C C C C C C C B C C C B C B C C C D D C C C E
U-turn paper guide Screw(312) Screw Gear(27T) Drive arm Screw(35K) SPF motor SPF interface harness Wire band Drive arm spring Drive frame E-ring Flange sheet DUP2 Belt(83MXL4.8) Gear(48T/15T) Spring pin(2.5-9) Bearing Metal D Frame R Sheet Plate Pressure spring Open and shut lock spring Paper feeding sheet 22MXL pulley Belt(91MXL4.8) JAM release knob Delivery paper guide spring Transport paper guide Inlet detect sensor Delivery roller Discharge brush Delivery paper guide White sheet PS roller Front cover Rear cover Screw(310) SPF tension plate SPF tension spring SPF transport unit

33 PRP39 7

5 SPF pick up unit (AL-1226)
GCAB-0008QSJZ PSPO-0002QSZZ MARMP0003QSZ1 LSTPP0001QSZZ XEBSD30P08000 CPWBF0009RS51 DHAI-0293QSZZ MLEVP0009QSZZ MLEVP0010QSZZ RPLU-0004QSZ1 XBPSD30P06KS0 MARMP0002QSZZ MSPRT0067QSZ1 XRESP40-06000 NGERH0073QSZZ PPIPP0008QSZZ MSPRC1316FCZ1 LBOSZ1851FCZZ LBSHZ0303FCZZ NSFTZ0012QSZZ LBSHZ0006QSZZ NPLYZ0010QSZZ XRESP30-06000 MSPRT0066QSZ1 PTME-0019QSZZ NROLP0024QSZ1 NGERH0990FCZZ XPSSP20-07000 NGERH0992FCZZ NROLR0922FCZZ NSFTZ0011QSZ2 MSPRC0115QSZZ MARMP0004QSZZ LFRM-0011QSJ2 MSPRD0114QSZ1 (Unit) 901 C F R M - R S 5 8
PRICE NEW RANK MARK AM AC AD AD AA AG AE AD AE AQ AA AD AB AA AE AD AE AC AC AG AC AE AA AC AD AH AB AA AB AR AF AB AF AL AD BF
PART RANK D C C C C E C C C B C C C C C C C C C C C C C C C C C C C C C C C D C E
Open and shut exterior Stopper sponge Stopper arm Paper stopper R Screw(38) SPF sensor PWB Sensor harness Set detect lever ACT Open and shut detect lever ACT PU solenoid Screw(36KS) Solenoid arm Solenoid arm spring E-ring Clutch gear(20T) Clutch sleeve MF clutch spring B STK clutch boss M bushing C Clutch shaft M Bushing 2 20MXL pulley E-ring Clutch pawl spring Clutch pawl Pick up roller Gear(16T) Spring pin(2-7) Gear(20T) Manual feeding roller PF shaft Paper feeding spring Pick up arm Paper feedind frame PF frame spring SPF pick up unit

31 PRP01026

6 Operation panel
CPNLH0023QS31 CPNLH0023QS32 CBTN-0019QS02 JBTN-0020QSZZ JBTN-0005QSZZ CBTN-0050QS01 JBTN-0049QSZZ CPWBF0113QSE1 CPWBF0113QSE7 XEBSD30P08000 GCAB-0063QSZZ XEBSE30P10000 GCAB-0064QSZZ
PRICE NEW RANK MARK AR N AR N AF AC AC AE AF BB BB AA AT AA AN
PART RANK D D E C C E C E E C D C D
Panel Panel Copy key Copy key light % Key Operation key R Operation key L Operation PWB Operation PWB Screw(38) Operation cabinet Screw(310) Operation panel (AL-1217) (AL-1226)

(AL-1217) (AL-1226)

PRP01027

7 Side door unit

GCAB-0007QSJ2 PTME-0004QSZZ MSPRT0029QSZZ PGIDM0008QSZZ LPLTM0043QSZZ MSPRD0076QSZ1 XHBSE30P06000 XEBSE30P06000 LFRM-0003QSJ2 XEBSD30P10000 MSPRC0032QSZZ DHAI-0291QSZZ MSPRC0031QSZZ MSPRC0030QSZZ NSFTZ0006QSZ1 XRESP30-06000 NROLP1122FCZZ CHLDZ0010RS52
PRICE NEW RANK MARK AU AG AC AD AD AD AA AA AN AA AB AC AB AC AG AA AF AU
PART RANK D C C C C C C C D C C C C C C C C E
Side door Lock pawl Lock pawl spring Hinge guide Earth plate Earth spring Screw(36) Screw(36) Side door inner frame Screw(310) Transcription pressure spring TCFB harness PS earth spring PS pressure spring PS shaft E-ring PS upper roller Transcription holder unit

PRICE NEW RANK MARK AC AB AP AD AM AB AF AD AK AG AR AG
PART RANK C C E C C C C C C C C C
Delivery roller upper Delivery roller spring POD sensor PWB Delivery actuator Delivery paper guide Delivery transport roller spring PS upper roller Delivery earth spring OP-MCU harness LSU harness FFC core Panel core sheet

PRP01031

G Middle frame
NROLP0007QSZ1 NBRGC0579FCZZ NROLP0012QSZ2 NPLYZ0001QSZZ NBLT-0005QSZZ LBNDJ0043FCZZ NCPL-0002QSZZ MSPRC0024QSZ1 RMOTD0009QSZZ XEBSD30P10000 XEBSD30P30000 NFANP0005QSZ1 LHLDZ0018QSZZ QSLP-0006QSZZ XEBSD30P06000 QSLP-0005QSZZ XBPSC30P06K00 DHAI-0267QSZZ DHAI-0292QSZZ NBLTT0001QSZZ LFRM-0002QSZZ JKNBZ0001QSZZ DHAI-0287QSZZ DHAI-0276QSZ2 PGIDM0009QSZZ LPINS0301FCZZ DHAI-0271QSZZ LX-BZ3006SC0S XBBSD30P08000 XEBSE40P12000 PMLT-0067QSZZ
PRICE NEW RANK MARK AQ AE AL AE AH AA AC AC AU AA AA BR AE AE AA AE AA AG AF AH AX AE AF AL AG AD AP AA AA AA AC
PART RANK C C C C B C C C B C C B C C C C C C C B D C C C C C C C C C C
Delivery roller lower Roller bearing Delivery trasport roller lower Pulley(22T) Delivery roller drive belt Snap band(SG-130) Hopper cupring S Hopper spring Toner motor Screw(310) Screw(330) Fan TC high voltage holder BC HV electrode plate Screw(M36) TC HV electrode plate Screw(36K) BC harness TC harness Belt 308 Middle frame Roller rotation knob PPD2 interface harness HL harness 1 Harness guide DV guide pin DSV harness Screw(36) Screw(38) Screw(412) Cushion

(200V Series)

10 PRP01075

H Base plate unit 1

CPWBF0116RS51 MLEVP0006QSZZ MSPRC0026QSZ1 XEBSE30P10000 PGIDM0010QSZ1 XRESP50-06000 NROLR0013QSZZ NBRGC0100FCZ1 NGERH0020QSZZ PPIPP0109FCZ1 MSPRC1316FCZ1 XPSSJ20-07000 LBOSZ1851FCZZ XRESP40-06000 LBOSZ1031FCZZ MSPRC0161QSZZ PPIPP0003QSZZ NGERH1132FCZZ NBRGP0562FCZZ CROLP0015QS01 NGERH0022QSZZ NGERH0026QSZZ NGERH0025QSZZ CPLTM0024QS01 LPLTM0046QSZZ QSW-B0003QSZZ DHAI-0269QSZZ GDAI-0001QSJ1 PSHEZ2026FCZ1 LHLDZ0017QSZZ MSPRC0047QSZZ PCOVP0013QSZZ LRALP0001QSJ2 XEBSE40P12000 PSHEZ2174FCZZ XBPSD30P08KS0 PCOVP0007QSJZ DHAI-0270QSZZ XEBSE30P12000 MSPRC0077QSZ1 LPLTM0016QSZZ LX-WZ0023FCZZ XEBSE30P10000 PCOVP0008QSZZ PCOVP0009QSZZ MSPRC0037QSZZ
PRICE NEW RANK MARK AP AD AB AA AG AA AQ AC AG AC AE AA AC AA AC AF AD AH AD AU AC AD AD AG AE AF AD BF AB AD AA AD AM N AA AB AA AE AD AA AB AE AA AA AE AE AB
PART RANK E C C C C C C C C C C C C C C C C C C C C C C C C B C D C C C D C C C C D C C C C C C C C C

PPD1sensor PWB PS front actuator PS front actuator spring Screw(310) TC front guide upper E-ring PS lower roller Bearing 6 Cluth gear(26T) Pipe A MF clutch spring B Spring pin(2-7) STK clutch boss E-ring Clutch boss Clutch spring Clutch sleeve Clutch gear(29T) Bearing Paper feeding roller Gear(33T) Gear(21/29T) W gear(30T) PF plate 2 PS earth plate Tray detect switch CED1 harness Base plate Sheet M1 Pressure plate holder Pressure plate spring Malti cover Base plate rail R Screw(412) Paper feeding sheet Screw(38KS) Sensor cover D-RST harness Screw(312) Front exterior lever spring Front exterior lever plate Washer Screw(310) 2nd gear cover 2nd connector cover Transport lower roller spring
(AL-1226) (AL-1226) (AL-1226) (AL-1226)

(AL-1217)

I Base plate unit 2

4 ! ! 48

LHLDZ0092QSZZ XHBSE30P06000 CPWBX0112QS3A CPWBX0112QS3E CPWBF0114QSE1 RDENC0007QSZZ DHAI-0283QSZ1 XEBSE30P10000 RDENC0006QS13 XBBSE30P06000 XEBSE40P12000 GDAI-0001QSJ1 GLEGG0064FCZZ LPLTM0020QSZZ PSHEZ0390QSZZ RCORF0018QSZZ XBPSN40P06K00 RCORF0021QSZZ LFRM-0062QSZZ RCORF1028LCZZ DHAI-0294QSZZ DHAI-0305QSZ1 CPWBF0122QS31 LHLDC0097QSZZ XEBSD30P10000 DHAI-0276QSZ2 PSHEZ0405QSZZ
PRICE NEW RANK MARK AP AA BW BY BA BG AG AA BN AA AA BF AC AL AL AR AA AK AG AP AK AP AZ AG AA AL AE
PART RANK C C E E E E C C E C C D C C C C C C C C C C E C C C C
PWB holder JAG Screw(36) MCU PWB MCU PWB IF PWB High voltage PWB MCU-I/F harness Screw(310) DC power supply PWB Screw(36) Screw(412) Base plate Rubber foot Base plate reinforce plate F PWB holder sheet FFC core Screw(46K) Core Connector frame Ferrite core Center frame harness Inlet interface harness Noise filter PWB Noise filter holder Screw(310) HL harness 1 Connector ground sheet (AL-1217) (AL-1226)

(200V)

PRP01077

J Fusing unit

PGIDM0023QSZZ VRH-ST2HB157K MSPRD0282QSZZ PBRSR0004QSZ1 PCOVP0010QSZZ MSPRP0033QSZZ LFRM-0004QSZZ LX-BZ0010QSZZ RDTCT0128FCZZ XBPSD30P10KS0 CTME-0229FC04 CTHM-0019DS52 CPWBF0116RS52 MSPRP0034QSZZ PCOVP0011QSZZ DHAI-0280QSZ1 LBNDJ0037FCZ1 LSTPP0116FCZZ NGERH0540FCZ3 NBRGP0567FCZZ NROLI0014QSZ3 RLMPU0011QSZZ MLEVP0015QSZZ NBRGP0260FCZ1 MSPRC0055QSZZ LX-WZ0313FCZZ NROLR0028QSZZ MLEVP0014QSZZ LPLTM0022QSZ4 LFRM-0005QSZ1 XEBSE30P12000 TCAUH0017QSZZ PSHEZ0045QSZ2 PGIDH0026QSZZ PSHEP0023QSZZ LX-BZ0735FCZZ MSPRT0054QSZ1 LPLTP0009QSZZ XRESP30-04000 PSHEP0047QSZZ XEBSE30P08000 LX-BZ0011QSZZ (Unit) 901 D U N T W R S 1 1
PRICE NEW RANK MARK AP AD AH AD AG AD AV AB AR AB AG AT AP AE AK AH AA AA AD AG BA BA AF AD AC AA AZ AF AG AQ N AA AC AC AE AF AA AB AS AA AC AA AB BS
PART RANK C C C B D C D C B C C E E C D C C C C C C B C C C C C C C D C D C C C C C C C C C C E
U-turn guide lower Resistor(1/2W 150M) FU earth wire Discharge brush FU Fusing cover F Copy lamp spring F Fusing upper frame Screw(36) Thermistor Screw(310KS) Separator pawl FU thermostat unit PPD2 sensor PWB Copy lamp spring R Fusing cover R HL harness 2 Wire band Roller stopper Fushing gear(45T) Fusing bearing Heart roller Heater lamp Pressure lever R Pressure bearing N Pressure spring Washer Pressure roller Pressure lever F Scraper Fusing lower frame Screw(312) High temperature caushion label PG earth sheet N2 Fusing front paper guide Fusing front PG sheet Screw Gate spring Turn over gate E-ring Handle label Screw(38) Screw Fusing unit

PRP01078

K Drive unit
XBBSD40P06000 RMOTP0036QSZZ MSPRC0053QSZ1 NGERH0050QSZZ NPLYZ0002QSZZ NGERH0010QSZZ NGERH0009QSZZ NGERH0014QSZZ CGERH0011RS51 NGERH0015QSZZ NGERH0007QSZZ NGERH0016QSZZ NGERH0019QSZZ NGERH0018QSZZ MSPRC0023QSZ1 NGERH0008QSZ3 NGERH0017QSZZ NGERH0012QSZZ NGERH0013QSZZ CPLTM0042QS02 XBBSD30P04000 RPLU-0035QSZZ MSPRC1318FCZ1 PTME-0002QSZZ RPLU-0002QSZZ PTME-0003QSZ1 DHAI-0296QSZZ (Unit) 901 C P L T M R S 5 5
PRICE NEW RANK MARK AA BD AC AD AC AD AD AD AE AD AH AD AD AC AC AL AD AE AG AY AA AL AA AD AN AD AK BM
PART RANK C B C C C C C C E C C C C C C C C C C C C B C C B C C E
Screw(46) Main motor Pulley spring Ratchet gear(33T) Pulley(17T) Gear(28T) Gear(46/16T) Gear(30/15T) MG gear unit Gear(37/15T) Gear(68/26T) Cupring gear(34T) Ratchet gear(21T) Ratchet gear(28T) Ratchet spring Gear(55/19T) Gear(33/20/15T) Gear(20T) Gear(31/17T) Main drive plate Screw(34) Solenoid Spring B PS roller pawl Solenoide Roller pawl Main motor harness Drive unit[Except No.27]

PRP01079

L Single manual paper feeding cover unit (AL-1217)
CCLEZ0005RS51 XEBSE30P08000 PCOVP0012QSJ1 CSW-M0016RS51 XEPSD20P10000 MSPRP0110QSZ1
PRICE NEW RANK MARK AQ AA AH AG AA AD

PART RANK E C C E C C

Charger cleaner unit Screw(38) Single upper cover Side door detect switch unit Screw(210) Door switch spring

PRP01080

M Multi manual paper feeding cover unit (AL-1226)
CCLEZ0005RS51 XEBSE30P08000 PCOVP0023QSJ1 CSW-M0016RS51 XEPSD20P10000 MSPRP0110QSZ1 PSHEZ0075QSZZ
PRICE NEW RANK MARK AQ AA AH AG AA AD AC

PART RANK E C D E C C C

Charger cleaner unit Screw(38) Multi upper cover Side door detect switch unit Screw(210) Door switch spring MB upper guide sheet

5 PRP01081

N Single manual paper feeding unit (AL-1217)

501 502

CPWBF0116RS54 DHAI-0295QSZZ LBNDJ0013FCZ1 XHBSE30P06000 CPLTM0023QS02 NGERH0972FCZZ XRESP40-06000 XEBSE30P08000 NGERH0990FCZZ XPSSJ20-07000 NBRGP0562FCZZ NROLR0016QSZZ LFRM-0006QSJZ MSPRC0039QSZ1 XEBSD30P06KS0 MSPRC0038QSZ1 MLEVP0007QSZZ MSPRC0080QSZZ PGIDM0014QSJZ PGIDM0013QSJZ PGIDM0012QSJZ NSFTZ0007QSZ1 NROLP1122FCZZ LFRM-0007QSJ2 MSPRC0036QSZ1 NGERH0021QSZZ XEPSD30P06X00 MSPRP0079QSZZ XEBSE30P06000 MSPRD0108QSZZ XEBSE40P12000 MSPRC0109QSZZ CFRM-0007RS54 CFRM-0006RS53
PRICE NEW RANK MARK AP AC AA AA AF AB AA AA AB AA AD AT AN AC AA AC AD AB AF AF AF AG AF AL AB AD AA AD AA AC AA AC AX BB
PART RANK E C C C C C C C C C C C D C C C C C C C C C C D C C C C C C C C E E
MFD sensor PWB Manual feeding earth harness Wire band Screw(36) SB plate 1 Gear(27T) E-ring Screw(38) Gear(16T) Spring pin(2-7) Bearing MF transport roller Single manual feed frame Earth spring Screw(36KS) Actuator spring Actuator SB transport earth spring DUP upper guide SB side guide R SB side guide F Roller shaft PS upper roller Single manual feed lower frame MF spring Manual feeding gear Screw(36X) SB earth plate spring Screw(36) SB lower earth spring Screw(412) Spring SB manual feeding lower frame unit Single manual paper feeding unit

PRP31 30

O Multi manual paper feeding unit (AL-1226)
NROLR0922FCZZ XRESP40-06000 NGERH0992FCZZ MARMP0173FCZZ NROLP1008FCZZ XPSSJ20-07000 NGERH0990FCZZ NSFTZ2311FCZZ LBSHZ0303FCZZ LBRC-0055FCZZ XEBSE30P08000 PGIDM0014QSJZ XEBSD30P06000 MSPRC0049QSZZ LBOSZ1851FCZZ MSPRC1315FCZ1 PPIPP0109FCZ1 LBOSZ0118QSZZ NGERH0972FCZZ NGERH0991FCZZ LBNDJ0013FCZ1 DHAI-0295QSZZ XHBSE30P06000 XBPSD30P06KS0 CPLTM0023QS03 PPIPP0175FCZZ MSPRC1316FCZ1 LBOSZ1509FCZ1 RPLU-0003QSZZ MSPRC1318FCZ1 PTME-0179FCZZ PTME-0178FCZ1 MSPRC2175FCZZ XBBSD30P08000 LFRM-0010QSJZ XEBSE40P12000 LSTPP0300FCZZ MARMP0205FCZZ MARMP0204FCZ1 MHNG-0002QSZZ MSPRC0048QSZZ PGIDM0018QSJZ PGIDM0017QSJZ PCOVP0019QSJZ NGERH0021QSZZ LSOU-0002QSJZ LSOU-0003QSJZ MSPRC0109QSZZ CSOU-0002RS56 CFRM-0010RS54
PRICE NEW RANK MARK AR AA AB AC AK AA AB AU AC AK AA AF AA AC AC AD AC AE AB AC AA AC AA AA AG AC AE AD AN AA AC AC AA AA AN AA AB AF AF AC AB AF AF AL AD AL AH AC AX BG
PART RANK C C C C C C C C C C C C C C C C C C C C C C C C C C C C B C C C C C D C C C C C C C C D C D D C E E
Manual feeding roller E-ring Gear(20T) Arm C Roller R Spring pin(2-7) Gear(16T) Cam boss A shaft M bushing C Multi F bracket Screw(38) DUP upper guide Screw(M36) Manual feeding earth spring STK clutch boss Clutch spring A Pipe A Cam boss A1R Gear(27T) Gear(20.20MXL) Wire band Manual feeding earth harness Screw(36) Screw(36K) Paper plate 1 Pipe B MF clutch spring B Cam boss B Multi feeding solenoid Spring B Manual paper feeding pawl B Manual paper feeding pawl A Pawl A spring Screw(38) Multi frame Screw(412) Stopper plate Arm B Arm A Arm hinge Arm C spring MB side guide R MB side guide L Multi tray front cover Manual feeding gear Multi tray 1 Multi tray 2 Spring Multi manual paper feeding tray unit Multi manual paper feeding unit

PRP01083

P Socket holder unit
LHLDZ0009QSAZ CHAI-0298RS51 CHAI-0273RS51 XBPSC30P06ES0 MSPRC0017QSZ1 MSPRC0018QSZ1 MSPRC0016QSZ1 XEBSD30P08000 LBNDJ0013FCZ1
PRICE NEW RANK MARK AF AL AN AA AC AC AC AA AA
PART RANK C C C C C C C C C
HV interface holder MC harness unit GB-MCFB harness unit Screw(36ES) HV terminal spring HV terminal spring HV terminal spring Screw(38) Wire band

Q TC case unit

PRICE NEW RANK MARK AF AE AC AG AA AA AA BG AC AC AC AA AB AL AC AL AU PART RANK C C C C C C C B C C C C C C C D E

PRP01084

PSHEZ0018QSZZ PGIDM0011QSZZ PSHEP0019QSZ1 PGIDH0025QSZ1 XEBSD30P06000 PSHEP0021QSZZ MSPRT0513FCZ1 DWIR-0466CSZZ QSLP-0007QSZZ MSPRC0027QSZZ MSPRC0028QSZZ MSPRC0051QSZ1 PSHEP0020QSZZ LHLDZ0010QSZ1 LFIX-0004QSZZ PCASZ0002QSZZ (Unit) 901 C H L D Z R S 5 2
Discharge plate sheet Separator guige TC sheet TC front guide Screw(M36) TC cover sheet R MC tension spring Charger wire TC electrode plate TC electrode spring BC electrode spring Front guide earth spring TC cover sheet F TC holder Holer fixing plate TC case Transcription holder unit

PRP01085

R 250 sheets tray
LPLTM5106FCZZ PSHEZ4142FCZZ LHLDW1226FCZZ LPLTM2642FCGZ LPLTP5107FCZ1 PTME-0255FCZZ XRESP40-06000 XEBSE30P08000 LX-WZ2028SCZZ NGERH0193FCZZ TLABZ3568FCZZ LPLTP5108FCZ1 PTME-0256FCZZ MSPRC0108QSZZ MSPRC1873FCZ1 MSPRC1145FCZZ LSTPP0161FCZZ GCASP0001QSJ2 (Unit) 901 C C A S P R S 5 5
PRICE NEW RANK MARK AR AC AB AD AG N AG AA AA AA AB AB AG N AG AC AB AA AB AZ BF
PART RANK C C C C C C C C C C D C C C C C C D E
Turning plate 250 Rotation plate sheet Turn fasner Tray rear plate 250 tray side plate F 250 Tray pawl F E-ring Screw(38) Washer(12) Manual feeding gear Indication label 250 tray side plate R 250 Tray pawl R 250 Tray spring Tray spring Stopper spring Rotation plate stopper 250 Tray case 250 Tray unit(Except No.20)

PRP01086

S Harness
DHAI-0283QSZ1 DHAI-0268QSZ1 DHAI-0294QSZZ DHAI-0285QSZZ DHAI-0296QSZZ PSHEZ0390QSZZ DHAI-0287QSZZ DHAI-0276QSZ2 DHAI-0271QSZZ DHAI-0280QSZ1
PRICE NEW RANK MARK AG AH AK AK AK AL AF AL AP AH
PART RANK C C C C C C C C C C
MCU-I/F harness CCD-MCU harness Center frame harness OP-MCU harness Main motor harness PWB holder sheet PPD2 interface harness HL harness 1 DSV harness HL harness 2
(200V Series) (200V Series)

PRP01087

T Packing material & accessories

1 ! ! ! 23 101

SPAKA0408QSZZ SPAKA0409QSZZ QACCB7521QCZZ QACCF7620QCZZ QACCER622QCPZ UBNDA0001FCZZ SSAKA5003CCZZ SSAKZ0002QSZZ TINSE0829QSZZ SSAKA2347QCZZ SPAKA0405QSZZ SPAKA0406QSZZ SPAKC0402RS28 SPAKC0403RS15 LHLDW1226FCZZ TTAG-0002QSZZ SPAKA0051RSZZ SPAKA0064RSZ1 TTAG-0006QSZZ CLEVP0016QS01 SPAKA0411QSZZ SPAKA5116FCZZ TCAUH0007QSZZ SPAKA0432QSZZ CDSKA0019QS32
PRICE NEW RANK MARK AN AR AS AX AQ AA AA AF AU N AB AN AS AT N AU N AB AB AC AC AE AL AE AB AD AC AL
PART RANK D D B B B C D D D D D D D D C D D D D C D D D D D
Top packing OC Top packing SPF AC cord AC cord AC cord AC cable band Vinyl bag(140260mm) Body vinyl bag Operation manual Vinyl bag(240300mm) Bottom packing Bottom packing Packing case Packing case Turn fasner Tray rotation tag OC packing OC packing Scanner fixing tag JAG Pressure block lever Accessories Add A SPF protect sheet Laser caution label SPF protect sheet JAG CD-ROM (AL-1217) (AL-1226) (AL-1217 India) (AL-1217/AL-1226 Other countries) (AL-1217 STCL)

103 104

0AV4000135411 0AV3160034000 0AV5140022000 0AV5190009000 0AV3180000004 0AV3082561300 0AV3090076000 0AV3090077000 0AV3090078000 0AV3090071000 0AV5030123000 0AV5030130000 0AV5030125000 0AV5080010000 0AV5190024000 0AV5040012000 0AV5060085000 0AV5060083000 0AV5050005000 0AV5130008000 0AV7100003000 0AV6114125811 0AV8117730414 0AV8117730514 0AV7414136011 0AV5110012000 0AV5110001000 0AV5110001000 0AV5110006000 0AV5110006000 0AV5110002000 0AV5110002000 0AV5110002000 0AV5110002000 0AV5110004000 0AV5110004000 (Unit) RDENC0006QS13

106 ! 901

PRICE NEW RANK MARK BD AQ AF AL AL AF AF AN AN AN AD AF AG AQ AK AM AF AF AA AC AE AF AB AB AD AB AA AA AA AA AA AA AA AA AA AA BN
PART RANK B B B B B B B B B B B B B B B B A A C C C C C C C C C C C C C C C C C C E
Transformer(N-T01-354-D11) Triac(TM1661PLF113) Power thermistor(M10010T3C) Varistor(ENC471D-14A) Phototriac coupler(S21ME3Y) Photo coupler(PS2561) IC(MM1431ATT) IC(FA3647P) IC(PQ20RX11) IC(PQ3RD23) Connector(B02B-VT) Connector(B04P-XL-R) Connector(B16B-PHDSS-B) Relay(FTR-H1AA024V) Arrestor(RA-102M-C6-Y) Switch(SDDJE30501 10A 250V) Fuse(215RB-10AA-SB 10A/250V) Fuse(215SB-3R15AA-SB 3.15A/250V) Fuse holder(PFC5000-0203) Terminal(TP00370-41) Insulator(M-30AD-D-3) Heatsink(LM41258) Screw(NACPEW-B38ZF B38) Screw(NACPEW-B310ZF B310) Label(LV41360) Jumper wire(RJ-SKA-06 6mm) Jumper wire(RJ-SCA-06 10mm) Jumper wire(RJ-SCA-06 10mm) Jumper wire(RJ-SDA-06 12.5mm) Jumper wire(RJ-SDA-06 12.5mm) Jumper wire(RJ-SEA-06 15mm) Jumper wire(RJ-SEA-06 15mm) Jumper wire(RJ-SEA-06 15mm) Jumper wire(RJ-SEA-06 15mm) Jumper wire(RJ-SGA-06 20mm) Jumper wire(RJ-SGA-06 20mm) DC power supply PWB [T1] [TR1] [TH1] [X1] [PC1] [PC2,PC003] [IC1,IC102] [IC2] [IC101] [IC103] [CN1] [CN2] [CN101] [RL1] [Z1,Z002] [S1] [F1,F003] [F2]
[RJ701,RJ718,RJ724] [RJ712,RJ713,RJ715] [RJ721,RJ725,RJ727] [RJ711,RJ723,RJ726,RJ731] [RJ740,RJ742,RJ744] [RJ702,RJ704,RJ705,RJ714] [RJ719,RJ720,RJ729,RJ730] [RJ732,RJ733,RJ734,RJ735] [RJ737,RJ739,RJ741,RJ743] [RJ703,RJ706,RJ710,RJ722] [RJ728,RJ736,RJ738] (200V)
6- 2 6- 5 1- 1 22- 901 16- 1 17- 1 2- 901 24- 101 1- 13 1- 501 18- 502 18- 501 19- 502 3- 11 5- 901 3- 14 4- 901 15- 9 8- 1 20- 3 20- 2 21- 901 7- 18 24- 17 18- 5 19- 25 12- 24 15- 20 15- 901 8- 2 8- 3 8- 4 4- 40 8- 5 6- 1 6- 1 5- 7 25- 901 6- 8 25- 901 6- 8 13- 5 27- 901 12- 1 14- 13 10- 4 18- 1 13- 44 13- 4 26- 901 13- 4 26- 901 12- 20 19- 501 3- 501 16- 4 17- 4 14- 12 14- 7
PRICE NEW PART RANK MARK RANK
DHAI-0285QSZZ DHAI-0287QSZZ " DHAI-0290QSZ1 DHAI-0291QSZZ DHAI-0292QSZZ DHAI-0293QSZZ DHAI-0294QSZZ " DHAI-0295QSZZ " DHAI-0296QSZZ " DHAI-0303QSZZ DHAI-0305QSZ1 DHAI-0310QSZZ DUNT-0032RS20 DUNT-0276QS11 DUNTK0013QS13 DUNTW0285RS11 DWIR-0466CSZZ [G] GCAB-0004QSJ1 GCAB-0007QSJ2 GCAB-0008QSJZ GCAB-0026QSJ2 GCAB-0061QSZZ GCAB-0062QSZ1 GCAB-0062QSZZ GCAB-0063QSZZ GCAB-0064QSZZ GCASP0001QSJ2 GCOV-0045QSZ1 GCOV-0045QSZZ GCOVH0003QSJZ GCOVH0004QSJ1 GDAI-0001QSJ1 " GLEGG0064FCZZ [J] JBTN-0005QSZZ JBTN-0020QSZZ JBTN-0049QSZZ JKNBZ0001QSZZ JKNBZ0004QSZZ [L] LBNDJ0013FCZ1 " " " " " LBNDJ0037FCZ1 LBNDJ0043FCZZ LBOSZ0118QSZZ LBOSZ1031FCZZ LBOSZ1509FCZ1 LBOSZ1851FCZZ " " LBRC-0055FCZZ LBSHZ0006QSZZ LBSHZ0303FCZZ " LFIX-0004QSZZ LFRM-0002QSZZ LFRM-0003QSJ2 LFRM-0004QSZZ LFRM-0005QSZ1 LFRM-0006QSJZ LFRM-0007QSJ2 LFRM-0010QSJZ LFRM-0011QSJ2 LFRM-0012QSZZ LFRM-0013QSZZ LFRM-0062QSZZ LHLDC0097QSZZ LHLDW1226FCZZ " LHLDZ0009QSAZ LHLDZ0010QSZ1

23- 4 11- 23 23- 7 4- 9 7- 12 11- 19 5- 8 13- 40 23- 3 18- 2 19- 22 15- 27 23- 5 8- 37 13- 41 27- 1 3- 901 8- 6 9- 4 14- 901 21- 17 18
[C] CBTN-0019QS02 CBTN-0050QS01 CCAB-0003QS22 CCASP0001RS55 CCLEZ0005RS51 " CCOVH0004RS54 CDSKA0019QS32 CFIX-0021QS01 CFIX-0021RS51 CFRM-0006RS53 CFRM-0007RS54 CFRM-0010RS54 CFRM-0011RS58 " CFRM-0013RS59 " CGERH0011RS51 CGERH0162QS01 CHAI-0273RS51 CHAI-0298RS51 CHLDZ0010RS52 " CLEVP0016QS01 CPLTM0023QS02 CPLTM0023QS03 CPLTM0024QS01 CPLTM0042QS02 CPLTM0042RS55 CPLTM0288QS01 CPLTM0291QS01 CPLTM0294QS01 CPLTM0298QS01 CPLYZ0028QS01 CPNLH0023QS31 CPNLH0023QS32 CPWBF0009RS51 CPWBF0113QSE1 " CPWBF0113QSE7 " CPWBF0114QSE1 " CPWBF0116RS51 CPWBF0116RS52 CPWBF0116RS53 CPWBF0116RS54 CPWBF0122QS31 CPWBX0112QS3A " CPWBX0112QS3E " CROLP0015QS01 CSOU-0002RS56 CSOU-0035RS51 CSW-M0016RS51 " CTHM-0019DS52 CTME-0229FC04 [D] DHAI-0267QSZZ DHAI-0268QSZ1 " DHAI-0269QSZZ DHAI-0270QSZZ DHAI-0271QSZZ " DHAI-0276QSZ2 " " DHAI-0280QSZ1 " DHAI-0282QSZZ " DHAI-0283QSZ1 " DHAI-0285QSZZ "
AF AE AS BF AQ AQ BF AL AG BB BB AX BG BF BF BP BP AE AN AN AL AU AU AL AF AG AG AY BM BC AG AK AF AM AR AR AG BB BB BB BB BA BA AP AP AP AP AZ BW BW BY BY AU AX AZ AG AG AT AG AG AH AH AD AD AP AP AL AL AL AH AH AG AG AG AG AK AK
E E D E E E E D D E E E E E E E E E E C C E E C C C C C E E E E C E D D E E E E E E E E E E E E E E E E C E E E E E C C C C C C C C C C C C C C C C C C C
AK AF AF AN AC AF AE AK AK AC AC AK AK AD AP AB BX BT BS BS BG AX AU AM AZ AK AL AL AT AN AZ AG AG AL AX BF BF AC AC AC AF AE AD AA AA AA AA AA AA AA AA AE AC AD AC AC AC AK AC AC AC AC AX AN AV AQ AN AL AN AL AD AG AG AG AB AB AF AL
C C C C C C C C C C C C C C C C E E E E B D D D D D D D D D D D D D D D D C C C C C C C C C C C C C C C C C C C C C C C C C D D D D D D D D C C C C C C C C
6- 4 6- 3 6- 6 11- 22 4- 1 14
LHLDZ0017QSZZ LHLDZ0018QSZZ LHLDZ0092QSZZ LHLDZ0093QSZZ LPINS0019QSZZ LPINS0301FCZZ LPLTM0016QSZZ LPLTM0020QSZZ LPLTM0022QSZ4 LPLTM0043QSZZ LPLTM0046QSZZ LPLTM0096QSZZ LPLTM2642FCGZ LPLTM5106FCZZ LPLTP0009QSZZ LPLTP0011QSJZ LPLTP0012QSJZ LPLTP0013QSZZ LPLTP0131QSZZ LPLTP5107FCZ1 LPLTP5108FCZ1 LRALP0001QSJ2 LSOU-0001QSJZ LSOU-0002QSJZ LSOU-0003QSJZ LSOU-0005QSJ4 LSOU-0008QSJZ LSOU-0035QSZZ LSTPF0013QSZZ LSTPP0001QSZZ LSTPP0116FCZZ LSTPP0161FCZZ LSTPP0300FCZZ LX-BZ0010QSZZ LX-BZ0011QSZZ LX-BZ0012QSZZ LX-BZ0016QSZZ LX-BZ0033QSZZ LX-BZ0735FCZZ LX-BZ3006SC0S LX-WZ0023FCZZ LX-WZ0313FCZZ LX-WZ2028SCZZ [M] MARMP0001QSZZ MARMP0002QSZZ MARMP0003QSZ1 MARMP0004QSZZ MARMP0173FCZZ MARMP0204FCZ1 MARMP0205FCZZ MHNG-0002QSZZ MHNG-0017QSZZ MLEVP0005QSZZ MLEVP0006QSZZ MLEVP0007QSZZ MLEVP0009QSZZ MLEVP0010QSZZ MLEVP0014QSZZ MLEVP0015QSZZ MLEVP0047QSE1 MLOKZ0004QSZZ MSPRC0016QSZ1 MSPRC0017QSZ1 MSPRC0018QSZ1 MSPRC0021QSZZ MSPRC0023QSZ1 MSPRC0024QSZ1 MSPRC0026QSZ1 MSPRC0027QSZZ MSPRC0028QSZZ MSPRC0030QSZZ MSPRC0031QSZZ MSPRC0032QSZZ MSPRC0036QSZ1 MSPRC0037QSZZ MSPRC0038QSZ1 MSPRC0039QSZ1 MSPRC0047QSZZ MSPRC0048QSZZ MSPRC0049QSZZ

MSPRC0051QSZ1 MSPRC0053QSZ1 MSPRC0055QSZZ MSPRC0062QSZZ MSPRC0063QSZZ MSPRC0077QSZ1 MSPRC0080QSZZ MSPRC0108QSZZ MSPRC0109QSZZ " MSPRC0115QSZZ MSPRC0149QSZZ MSPRC0153QSZZ MSPRC0161QSZZ MSPRC1145FCZZ MSPRC1315FCZ1 MSPRC1316FCZ1 " " MSPRC1318FCZ1 " MSPRC1873FCZ1 MSPRC2175FCZZ MSPRD0076QSZ1 MSPRD0108QSZZ MSPRD0114QSZ1 MSPRD0281QSZZ MSPRD0282QSZZ MSPRP0033QSZZ MSPRP0034QSZZ MSPRP0059QSZZ MSPRP0060QSZZ MSPRP0065QSZZ MSPRP0079QSZZ MSPRP0110QSZ1 " MSPRP0113QSZ1 MSPRT0019QSZ1 MSPRT0020QSZ1 MSPRT0029QSZZ MSPRT0054QSZ1 MSPRT0061QSZZ MSPRT0064QSZ1 MSPRT0066QSZ1 MSPRT0067QSZ1 MSPRT0283QSZZ MSPRT0284QSZZ MSPRT0294QSZZ MSPRT0513FCZ1 [N] NBLT-0005QSZZ NBLTT0001QSZZ NBLTT0003QSZZ NBLTT0006QSZZ NBLTT0030QSZZ NBLTT0031QSZZ NBRGC0017QSZZ NBRGC0100FCZ1 NBRGC0579FCZZ NBRGM0501FCZZ NBRGP0260FCZ1 NBRGP0562FCZZ " NBRGP0567FCZZ NCPL-0002QSZZ NFANP0005QSZ1 NGERH0007QSZZ NGERH0008QSZ3 NGERH0009QSZZ NGERH0010QSZZ NGERH0012QSZZ NGERH0013QSZZ NGERH0014QSZZ NGERH0015QSZZ NGERH0016QSZZ NGERH0017QSZZ NGERH0018QSZZ NGERH0019QSZZ NGERH0020QSZZ NGERH0021QSZZ "
AD AE AP AC AB AD AE AL AG AD AE AF AD AR AS AH AH AD AD AG AG AM AY AL AH BA AH AR AC AD AA AB AB AB AB AC AC AB AA AA AA AA AA AF AD AD AF AC AF AF AC AQ AD AD AD AD AE AF AF AD AD AC AC AC AB AC AC AB AC AC AC AB AB AB AB AC AC AA AB AC
C C C C C C C C C C C C C C C C C C C C C C D D D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C
AA AC AC AC AB AB AB AC AC AC AB AC AB AF AA AD AE AE AE AA AA AB AA AD AC AD AD AH AD AE AD AD AD AD AD AD AD AB AB AC AB AC AC AC AB AC AC AC AA AH AH AG AG AH AF AC AC AE AB AD AD AD AG AC BR AH AL AD AD AE AG AD AD AD AD AC AD AG AD AD
C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B B B B B C C C C C C C C C B C C C C C C C C C C C C C C C
NGERH0022QSZZ NGERH0025QSZZ NGERH0026QSZZ NGERH0047QSZZ NGERH0050QSZZ NGERH0073QSZZ NGERH0161QSZZ NGERH0193FCZZ " NGERH0540FCZ3 NGERH0972FCZZ " " NGERH0990FCZZ " " NGERH0991FCZZ NGERH0992FCZZ " NGERH1132FCZZ NGERR0377FCZZ NPLYZ0001QSZZ NPLYZ0002QSZZ NPLYZ0010QSZZ NPLYZ0146FCZZ NROLI0014QSZ3 NROLM0022QSZ1 NROLM0023QSZ1 NROLP0007QSZ1 NROLP0010QSZZ NROLP0011QSZZ NROLP0012QSZ2 NROLP0024QSZ1 NROLP0046QSZZ NROLP1008FCZZ NROLP1122FCZZ " " NROLR0013QSZZ NROLR0016QSZZ NROLR0028QSZZ NROLR0922FCZZ " NSFTZ0006QSZ1 NSFTZ0007QSZ1 NSFTZ0009QSZZ NSFTZ0010QSZZ NSFTZ0011QSZ2 NSFTZ0012QSZZ NSFTZ0063QSZZ NSFTZ2311FCZZ [P] PBRSR0002QSZ2 PBRSR0003QSZ2 PBRSR0004QSZ1 PCASZ0002QSZZ PCOVP0007QSJZ PCOVP0008QSZZ PCOVP0009QSZZ PCOVP0010QSZZ PCOVP0011QSZZ PCOVP0012QSJ1 PCOVP0013QSZZ PCOVP0019QSJZ PCOVP0023QSJ1 PCOVP0037QSJZ PCOVP0038QSJ1 PCOVP0040QSJZ PCUSS0024QSZZ PCUSS0025QSZZ PCUSU0026QSZZ PDUC-0005QSZZ PFILZ0002QSZZ PGIDH0025QSZ1 PGIDH0026QSZZ PGIDH0029QSZZ PGIDM0006QSZ2 PGIDM0008QSZZ PGIDM0009QSZZ PGIDM0010QSZ1 PGIDM0011QSZZ

SPAKA0409QSZZ SPAKA0411QSZZ SPAKA0432QSZZ SPAKA5116FCZZ SPAKC0402RS28 SPAKC0403RS15 SSAKA2347QCZZ SSAKA5003CCZZ SSAKZ0002QSZZ [T] TCAUA0770FCZZ TCAUH0007QSZZ TCAUH0017QSZZ TINSE0829QSZZ TLABH0387QSZZ TLABZ0058QSZZ TLABZ3568FCZZ TLABZ4201FCZZ TTAG-0002QSZZ TTAG-0006QSZZ [U] UBNDA0001FCZZ [V] VCCCCY1HH101J VCCCCY1HH201J VCCCCY1HH331J VCCCCZ1HH101J VCCCCZ1HH120J VCCCCZ1HH220J VCCCCZ1HH330J VCCCCZ1HH470J VCEAGA1CW105M VCEAGA1CW106M VCEAGA1CW226M VCEAGA1CW476M " VCEAGA1EW476M VCEAGA1VW106M VCEAGA1VW476M VCEAJU1CW476M VCKYCY1CB104K VCKYCY1CF104Z VCKYCY1HB102K VCKYCY1HB104K VCKYCY1HB223K VCKYCZ1CB223K VCKYCZ1CF104Z VCKYCZ1HB102K VCKYCZ1HB222K VCKYCZ1HB821K VHDDSS133//-1 " VHDKDS121++-1 VHDKDS226++-1 VHEUDZS6.2B-1 VHI28F4BVEB85 VHI74HC151M-1 " VHI74LVX16128 VHIBA6920FP-1 VHID65001AF-1 VHID65503F+-1 VHIEES02L400P VHIH8S2320+-1 VHIHG73C1191C VHIKA7805AP-1 VHIKIA358F+-1 VHIKIA393F+-1 VHIL6219DS+-1 VHILC7935//-1 VHILCX244WM-1 VHIM51957BFP1 VHIMTD1361F-1 VHINC7ST08M-1 VHIP2010ASR-1 VHITD62064AF/ VHIUSB11AMX-1 VHIVHCT244M-1 VHP1LHEE-002A VHP1LHLE-002A VHP3650AG2J-1
AC AS AQ AX AC AB AF AF AB AB AC AC AA AA AB AB AB AC AC AF AF AF AC AD AD AE AE AC AH AE AD AF AC AD AR AR AR AL AK AK AP AD AN AN BN BN BG AL AR AB AC AM AC AC AB AZ AE AE AS AC BA AU BB BD BL AA AB AB AB AN AN AQ AL AC AC AN AS AN
C B B B C C C C C C C C C C C C C C C C C C C C C C C C C C C B B C C C C C C C C B B B E E E B B C C C B B B B B B B B B B B B B B B B B B B B B D D D D D
AR AE AC AB AT AU AB AA AF AB AD AC AU AF AD AB AC AB AE AA AA AA AB AA AA AA AA AA AA AA AB AB AB AA AA AB AB AB AA AA AA AC AB AB AA AA AC AA AA AC AC AC AX AD AD AP AL AG AG AG AY BH AE AE AE AN AN AG AH AR AD AN AM AH AG AC AC AL
D D D D D D D D D D D D D C D D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
26- 20 10- 15 13- 23 8- 32 8- 41 13- 27 9- 8 13- 31 26- 21 26- 22 26- 23 13- 13 28- 901 13- 6 4- 31 14- 9 27- 5 26- 123 26- 24 26- 25 27- 6 26- 26 26- 27 26- 70 27- 13 26- 28 25- 23 14- 22 11- 9 4- 7 15- 2 8- 25 26- 29 26- 30 26- 31 26- 32 15- 25 19- 29 5- 11 15- 22 24- 14 24- 14 24- 9 24- 9 24- 1
VHPGP1A71A1-1 VHVICPN38//-1 VRD-HT2EY151J VRD-HT2EY391J VRD-HT2EY472J VRH-ST2HB157K VRN-VT3ATR68J VRS-CY1JD000J VRS-CY1JD101J VRS-CY1JD102J VRS-CY1JD103J VRS-CY1JD121J VRS-CY1JD151J VRS-CY1JD152J " VRS-CY1JD220J VRS-CY1JD240J VRS-CY1JD332J VRS-CY1JD471J VRS-CY1JD472J VRS-CY1JD511J VRS-CZ1JD000J VRS-CZ1JD100J VRS-CZ1JD101J VRS-CZ1JD102F VRS-CZ1JD102J VRS-CZ1JD103F VRS-CZ1JD103J VRS-CZ1JD105F VRS-CZ1JD113F VRS-CZ1JD122F VRS-CZ1JD122J VRS-CZ1JD152J VRS-CZ1JD153J VRS-CZ1JD202J VRS-CZ1JD203J VRS-CZ1JD220J VRS-CZ1JD241J VRS-CZ1JD242J VRS-CZ1JD272J VRS-CZ1JD301J VRS-CZ1JD303J VRS-CZ1JD330J VRS-CZ1JD332J VRS-CZ1JD393J VRS-CZ1JD432F VRS-CZ1JD471J VRS-CZ1JD472J VRS-CZ1JD473J VRS-CZ1JD511J VRS-CZ1JD563J VRS-CZ1JD621J VRS-CZ1JD751J VRS-CZ1JD752F VRS-CZ1JD752J VRS-HT3DA101J VRS-HT3DA102J VRS-HT3DA1R0J VRS-HT3DAR22J VSKRA119S++-1 VSKRC106S++-1 VSKTA1281++-1 VSKTA1505S+-1 VSKTC3198++-1 [X] XBBSD30P04000 XBBSD30P08000 " XBBSD40P06000 XBBSE30P06000 XBBSE30P08000 XBPSC30P06ES0 XBPSC30P06K00 XBPSD30P05K00 XBPSD30P06KS0 " XBPSD30P08KS0 XBPSD30P10KS0 XBPSN40P06K00 XEBSD30P06000 "

(German) Achtung Explosionsgefahr bei Verwendung inkorrekter Batterien. Als Ersatzbatterien drfen nur Batterien vom gleichen Typ oder vom Hersteller empfohlene Batterien verwendet werden. Entsorgung der gebrauchten Batterien nur nach den vom Hersteller angegebenen Anwerisugen.
CAUTION FOR BATTERY DISPOSAL (For USA,CANADA) Contains lithium-ion battery. Must be disposed of properly. Remove the battery from the product and contact federal or state environmental agencies for information on recycling and disposal options.
COPYRIGHT 2002 BY SHARP CORPORATION
All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted. In any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
SHARP CORPORATION Digital Document Systems Group Products Quality Assurance Department Yamatokoriyama, Nara 639-1186, Japan
2002 August Printed in Japan t