Reviews & Opinions
Independent and trusted. Read before buy Sharp AL-1631!

Sharp AL-1631

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sharp AL-1631, size: 2.0 MB
Related manuals
Sharp AL-1631 Operation Manual

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sharp AL-1631Sharp AL 1631 Monochrome Laser - Copier

250 sheets, Up to 16 ppm copy, 20.4 in x 19.4 in x 15 in

When you need a high-quality digital laser copier, the Sharp AL-1631 is your answer. With a brisk up to 16 pages per minute output, Scan Once Print Many technology, and time saving automatic document feeder, the AL-1631 can handle the demands of any small office or workgroup.

 

[ Report abuse or wrong photo | Share your Sharp AL-1631 photo ]

Video review

V deo Recarga do Toner Sharp AL1000 AL1642CS AL1645 AL1651CS Treinamento ValeJet ...

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
banjoman 3:49pm on Friday, October 8th, 2010 
You are reading about a very good copier, made by Sharp. This very good machine was developed for the office, not the home. It is very easy to use.
mauriz 11:01pm on Thursday, August 19th, 2010 
Would recommend Price. Decent options, nothing fancy. Well built, have had for almost a year now without anything breaking. Very easy to use, enlarges, shrinks, sheet feeder. Have to wait for warm up before copy can be made. Good print quality quick and seems reliable sorta annoying to put in toner cart
enja 6:42am on Monday, May 24th, 2010 
Stay Away! Product while it appears to be original equipment is not. Poor Longevity I have a dental office; so the copier gets occasional use--about maybe 10 copies per day. In the beginning.
kpen 7:08pm on Saturday, April 17th, 2010 
Not a bad copier I have worked in offices for 34 years as office manager, secretary, etc.. Sharp service STINKS Sharp has THE WORST service I have ever dealt with. I had the AL-1551.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Power off methods

If not used for a certain period of time, the unit will automatically enter auto power shut-off mode (p.54) in order to minimize power consumption. In cases where the machine will not be used for a long time, turn off the power switch and remove the power cord from the outlet.
Type of paper feeding Paper tray

LOADING PAPER

Follow the steps below to load paper into the tray.
For best results, use only paper recommended by SHARP. Type of media Standard paper Size Letter (8-1/2" x 11") Legal (8-1/2" x 14") Invoice (5-1/2" x 8-1/2") Letter (8-1/2" x 11") Legal (8-1/2" x 14") Invoice (5-1/2" x 8-1/2") Weight 15 lbs. to 21 lbs. (56g/m2 to 80g/m2) 14 lbs. to 34.5 lbs.** (52g/m2 to 128g/m2)

Multi-bypass tray

Standard paper and thick paper
Special Transparency Letter (8-1/2" x 11") media film Envelope* Commercial 10 (4-1/8" x 9-1/2") Monarch (3-7/8" x 7-1/2")
* Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive, patches or synthetic materials. Do not use envelopes that are filled with air or envelopes that have labels or stamps attached. These will cause physical damage to the unit. ** For paper weighing from 28 to 34.5 lbs. (105g/m2 to 128g/m2), 8-1/2" x 11" is the maximum size that can be fed through the multi-bypass tray. Special papers such as transparency film, labels and envelopes must be fed one sheet at a time through the multi-bypass tray.

LOADING THE PAPER TRAY

Raise the handle of the paper tray and pull the paper tray out until it stops.
Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray.
Store the pressure plate lock which has been removed in step 2. To store the pressure plate lock, rotate the lock to fix it on the relevant location.

Pressure plate lock

Adjust the paper guides on the paper tray to the copy paper width and length. Squeeze the lever of paper guide A and slide the guide to match with the width of the paper. Move paper guide B to the appropriate slot as marked on the tray.

Paper guide B

Paper guide A
Fan the paper and insert it into the tray. Make sure the edges go under the corner hooks.
Do not load paper above the maximum height line ( the line will cause a paper misfeed. ). Exceeding

) key to select the multi-bypass tray.
Note for loading envelopes
Envelopes must be fed narrow side into the feed slot at a time. Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive, patches or synthetic materials. Do not use envelopes that are filled with air or envelopes that have labels or stamps attached. Envelopes of which the surface is not flat because of embossing may cause the copies/prints to become smudged. Under high humidity and temperature conditions the glue flaps on some envelopes may become sticky and be sealed closed when copied/printed. Use only envelopes which are flat and crisply folded. Curled or poorly formed envelopes may be poorly printed or may cause misfeeds. Be sure to select either Com10, DL, C5 or Monarch on the paper size setting of the printer driver. (For detailed information on printer driver, refer to the online manual.) It is recommended that you perform a test print before performing the actual copied/ printed job.
INSTALLING THE SOFTWARE (AL-1641CS)
This chapter explains how to install the software that allows the AL-1641CS to be used as a printer and scanner, and the procedures for using the printer and scanner functions. The following term is used in this chapter.

CD-ROM

Means the supplied CD-ROM with the SHARP Personal MFP series software.
SOFTWARE FOR THE SHARP PERSONAL MFP SERIES
The supplied CD-ROM includes software for this unit.

MFP driver

Scanner driver
Permits you to operate scanning function of this unit with TWAIN-compliant and WIA-compliant application.

Printer driver

Enables you to use the printer function of this unit with your computer.

Print Status Window

The print state and information on current printing are displayed on the status monitor window.

Sharpdesk

An integrated software environment that makes it easy to manage document and image files and launch applications.

Button Manager

Button Manager enabling the SCANNER ( ) key located on the unit. The scanning feature is only available with Windows 98/Me/2000/XP using a USB connection. For users running Windows 95/NT4.0 or using a parallel connection, only printing is available.

INSTALLING THE SOFTWARE

The following term is used in this section.
Means the unit as a printer and scanner. For this description, it is assumed that the mouse is configured for right hand operation. To print or scan, the MFP must be in the online state. The scanner feature only works when using a USB interface cable. If any error message appears, solve the problem following the instructions on the screen. After your problem is solved, the installing procedure will be continued. Depending on your problem, you may have to exit the installer. In this case, click the "Cancel" button to exit the installer. After solving your problem, reinstall the software from the beginning.
Installing onto Windows XP (USB/parallel interface)
Before starting the installation, make sure the USB or parallel interface cable is not connected to the MFP.
Insert the supplied CD-ROM into your CD-ROM drive. Click the "start" button, click "My Computer" ( double-click the CD-ROM ( ) icon. ), and then
When any of "Found New Hardware Wizard" messages appear during the software installation, be sure to click the "Cancel" button.
Double-click the "setup" (

) icon.

If the language selection screen appears after you double click the "setup" icon, select the language you wish to use and click the "Next" button. (Normally, the correct language is selected automatically.)
Select the software packages to be installed, and then click the "Next" button.
The software packages with checkmark ( ) on the list on the screen will be installed. Click the "Display README" button to show the information on the selected package.
If you are using the parallel interface connection, do not select the Button Manager checkbox because this feature is not supported with the parallel interface. If the following screen appears, click the "OK" button. Review the contents in "BEFORE INSTALLATION" (p.20), and then select only appropriate the software packages to be installed.

The procedure for loading paper is the same as for loading copy paper. See "LOADING PAPER" (p.14).
Open the document you intend to print, and select "Print" from the application's "File" menu. Make sure that "SHARP AL-1641CS" is selected as the current printer. If you intend to change any print setting, click the "Preferences" button to open the setting dialog.
On Windows 95/98/Me/NT 4.0, click the "Properties" button. On Windows 2000, the "Properties" button does not appear. Set your preferences by switching the tab in the "Print" dialog box.
Specify the print settings including the number of copies, media type, and print quality, and then click the "Print" button to start printing.
On Windows 95/98/Me/NT 4.0, click the "OK" button to start printing. For details on print settings, see the online manual or the help file for the printer driver. If copying is being performed when printing is started, copying will continue. After copying is complete, printing will be executed when the clear ( ) key is pressed twice, the ONLINE key is pressed to switch the unit to the online state or approximately 60 seconds (auto clear time)* elapse. * The auto clear time varies with a user program setting. See "USER PROGRAMS" (p.55). Preheat mode and auto power shut-off mode will be canceled when printing is started. If the paper size specified from the software application is larger than the paper size in the printer, part of the image that is not transferred to the paper may remain on the surface of the drum. In this case, the backside of the paper may become dirty. If this occurs, change to the correct size paper and print two or three pages to clean the image. If you start a print job while a scan job is in progress, the print data will be stored in the unit's memory. When the scan job is completed, printing will begin.

USING THE SCANNER MODE

The scanner driver for this unit includes an STI (Still image) driver and WIA (Windows Image Acquisition) driver. You can install software that supports the STI driver and WIA driver to enable scanning using the operation panel of the unit. For problems with the scanner function, see the online manual or the help file for the driver.

Using the Button Manager

Setting up the Button Manager
The Button Manager accessory software supports the STI driver and WIA driver. Setup that is required in Windows to use the Button Manager is explained in the following.

The settings for the Windows Event Manager for the SHARP AL-1641CS device allow the user to take advantage of the Sharp Button Manager to take control of events from Windows and send scanned images to any application that can be selected in Button Manager. This can be done with the Windows OS showing the Event Manager selection dialog or directly into a selected application if the Button Manager is the only allowed handler for device events from the SHARP AL-1641CS. This is done by changing the Windows device settings for the AL-1641CS in the Scanner and Camera device settings in the Control Panel.
This is the Control Panel Properties dialog for "Scanners and Cameras". The AL-1641CS is shown selected.
All About The Windows Event Manager and scanner events in Windows 98, Windows Me, Windows 2000 and Windows XP.
Windows Platforms provide a mechanism for software to handle external events for a scanner device like the SHARP AL-1641CS products. This mechanism is controlled by the device manager on a device basis. Applications that can handle events from a scanner/camera device register with the Windows Event Manager and shown as available in the registered applications. The path an event takes to get to the user's selected application depends upon the event settings for the device.
Scanner AL1641CS SCANNER key pressed. Event Manager Windows OS Event Manager selection dialog Displayed on screen User selects an application. The user application opens.
This is the Windows Event Manager Selection Dialog. Shown are two applications registered to handle the scanner event from the AL-1641CS device.
Using the SCANNER key to begin scanning
Scanning is not possible during a copy job. If the SCANNER ( ) key is pressed during a print job, the scan job will be stored. When scanning an original that has been placed in the SPF, only one original can be placed unless you are using Sharpdesk.

Press the SCANNER (

The unit enters scan mode.

) key.

Place the original you wish to scan on the document glass/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT" (p.47).
Press the right copy quantity key to display the number of the application that you wish to use for scanning.
The application numbers are initially as follows.
Application number SC1 SC2 SC3 SC4 SC5 SC6
Application launched Sharpdesk (Full color) (if installed) Sharpdesk (Monochrome) (if installed) E-mail (your standard e-mail program in the Windows OS you are using) Fax (if a fax program is installed) OCR (if an OCR program is installed) Microsoft Word (if installed)

Select "Acquire Image" from the "File" menu, or click the "Acquire" button ( ).
Set the configuration for scanning (refer to the online manual and help file), and click the "Scan" button.

Scan is started.

Scanning with the "Scanner and Camera Wizard" in Windows XP
Windows XP includes as a standard feature an image scanning function. The procedure for scanning with the "Scanner and Camera Wizard" is explained here. To cancel scanning, click the "Cancel" button in the screen that is displayed.
Click the "start" button, select "Control Panel", and click "Printers and Other Hardware", and then click "Scanners and Cameras" in the start menu. Click the "SHARP AL-1641CS" icon and click "Get picture" in "Imaging Tasks".
The "Scanner and Camera Wizard" appears. Click "Next" and establish the basic settings for scanning.
For information on the settings, see the Windows XP help file. After completing each setting, click "Next".
Select a name, format, and folder for the scanned image.
For information on the image name, file format, and folder, see the Windows XP help file.
Scanning begins. When scanning ends, select the next task you wish to perform.
For information on each selection, see the Windows XP help file. To quit the "Scanner and Camera Wizard", select "Nothing. Im finished working with these pictures." and click "Next".
Click "Finish" in the screen that appears.
The "Scanner and Camera Wizard" closes and the scanned image is saved.
HOW TO USE THE ONLINE MANUAL
The online manual provides detailed instructions for operating the unit as the printer or scanner and a list of methods for dealing with printing or scanner problems. To access the online manual, your computer must have Acrobat Reader 5.0 or a later version. If it is not installed, refer to "Installing Acrobat Reader" (below).

4 Start copying.

Press the start ( ) key.
If you start a print job while a copy job is in progress, the print job will begin when the copy job is completed. The scanning function cannot be used while a copy job is in progress.

About interrupt copying

If you press the start ( ) key to begin a copy job while a print job using the paper tray or multi-bypass tray is in progress, the copy job will begin automatically after the print data in the unit's memory is printed (interrupt copying). When this is done, the print data remaining in the computer is not sent to the unit. When the copy job ends, press the clear ( ) key twice, or press the ON LINE key once to change the unit to the online state (p.31), or wait until the set auto clear time (p.55) elapses. The remaining print data will be sent to the unit and printing will resume.

ORIGINAL PLACEMENT

Using the document glass
The document glass can read up to 8-1/2" x 14" original. Image loss 5/32" (4mm) can occur at the leading and trailing edges of the copies. Also image loss 11/64" (4.5mm) in total can occur along the other edges of the copies. When copying a book or an original which has been folded or a crumpled original, press down the SPF lightly. If the SPF is not securely closed, the copies may be striped or blurred.
Open the SPF, and place the original. Place an original face down on the document glass. Align it with the original scale and the centering ( ) mark. Gently close the SPF.

Original scale

Using the SPF
The SPF is designed to hold up to 30 originals measuring from 5-1/2" x 8-1/2" to 8-1/2" x 14" and weighting from 14 lbs. to 23.9 lbs. (52g/m2 to 90g/m2). Before feeding originals in the document feeder tray, be sure to remove any staples or paper clips from them. Before placing curled or wavy originals into the document feeder tray, be sure to flatten them. If not, original misfeeds may result. The SPF ( ) indicator on the operation panel will light up. If this indicator does not light up, the originals are not properly set or the SPF is not properly closed. Badly damaged originals may misfeed in the SPF. It is recommended that such originals be copied from the document glass. Special originals such as transparency film should not be fed through the SPF, but should be placed directly on the document glass. Image loss (max. 5/32" (4mm)) can occur at the leading and trailing edges of the copies. Also image loss (max. 11/64" (4.5mm) in total) can occur along the other edges of the copies. It can be 15/64" (6mm) (max.) at the trailing edge of the second copy of two-sided copying. To stop continuous copying using the SPF, press the clear ( ) key. Copying using one-sided to one-sided mode(AL-1641CS): Ensure that no indicator is lit among the original to copy indicators.

SPECIAL FUNCTIONS

This chapter describes the special functions of this unit. Use these functions as needed.
ABOUT THE SPECIAL FUNCTIONS OF AL-1641CS

Two sided copying

When copying from one-sided originals to two-sided copies, copying orientation can be selected between Turn on Long Edge and Turn on Short Edge. When making two-sided copies from the document glass, the paper size must be letter. Non-standard size paper cannot be used. When making two-sided copies, the multi-bypass tray cannot be used.

Turn on Long Edge

Turn on Short Edge

Making two-sided copies

Place the original(s) on the document glass or in the SPF. (see "ORIGINAL PLACEMENT" (p.47). Select two-sided copy mode.
When copying in a one-sided to two-sided mode: Use the original to copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge). See the illustrations on page 52.
Select the copy settings. See "SET THE COPY QUANTITY" (p.49), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.49), and "REDUCTION/ENLARGEMENT/ZOOM" (p.51).
Press the start ( ) key. The original is scanned into the unit's memory and the number of the copy quantity blinks in the display. Place the original that you wish to copy onto the rear side of the paper, and press the start ( ) key again. Copying begins. ) key. Copying begins in the selected two-sided copy mode.
Using the SPF Press the start (
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode (page 54)
Reduces toner consumption by approximately 10%.
Power save modes (page 55)
The unit has two power save modes of operation: preheat mode and auto power shut-off mode.

Preheat mode

When the unit enters the preheat mode, the power save ( ) indicator will light up and other indicators will remain on or off as before. In this condition, the fuser in the unit is maintained at a lower heat level, thereby saving power. To copy from the preheat mode, make desired copier selections and press the start ( ) key using the normal copying procedure.

C: Misfeed in the transport area
See "B: Misfeed in the fusing area" (p.65).

Open the front cover.

To open the front cover, see "INSTALLING THE TD CARTRIDGE" (p.10).
Rotate the roller rotating knob in the direction of the arrow and gently remove the misfed paper from the exit area.

Roller rotating knob

Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the start ( ) indicator will light up.

D: Misfeed in the SPF

An original misfeed may occur at one of three locations: if the misfed original is seen from the document feeder tray, (A) in the document feeder tray; if the misfed original is not seen from the document feeder tray, (B) in the exit area or (C) under the document feeder cover. Remove the misfed original following the instructions for each location. (A) Open the document feeder cover and pull the original gently to the left and out from the document feeder tray. Close the document feeder cover. Open and close the SPF to clear the SPF misfeed ( ) indicator. If the misfed original cannot be easily removed, proceed to (C).

Document feeder cover

(B) Open the SPF and rotate the roller to remove the misfed original from the exit area. If the misfed original cannot be easily removed, proceed to (C).

Roller

(C) If the original does not move easily into the exit area, remove it in the direction of the arrow while rotating the knob.
A number may appear in the display after a minus sign, indicating the number of the originals that must be returned to the document feeder tray. Open and close the SPF to clear the SPF misfeed ( ) indicator, and then return the required number of originals. Then press the start ( ) key to resume copying.

SPECIFICATIONS

Model Type Copy/printer system Originals Printer function Scanner function Paper tray Single bypass, Multi-bypass tray Paper output tray SPF Original sizes Original feed Document glass/SPF SPF

APPENDIX

AL-1631 Digital laser copier, desk-top type Dry, electrostatic transfer Sheets, bound documents 250 sheets Multi-bypass tray (50 sheets) 100 sheets SPF Max. 8-1/2" x 14"
AL-1641CS Digital multifunctional system, desk-top type

Available Available

ABOUT SUPPLIES AND OPTIONS
When ordering supplies, please use the correct part numbers as listed below. Be sure to use only genuine SHARP parts and supplies.
For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package.

Supply list

Supply TD cartridge Drum cartridge Part number AL-110TD AL-100DR Usable life Approx. 4,000 sheets * Approx. 18,000 sheets
* Based on copying onto letter-type paper at 5% toned area (The life of the TD cartridge which has been included in the unit at the factory is approximately 2,000 sheets.)

Interface cable

Please purchase the appropriate cable for your computer.

Parallel interface cable

IEEE 1284-Shielded type bi-directional parallel interface cable (6 feet Max.)

USB interface cable

Shielded twisted pair cable, high-speed transmission equivalent (6 feet Max.)
MOVING AND STORING THE UNIT

Moving instructions

When moving the unit, follow the procedure below. When moving this unit, be sure to remove the TD cartridge in advance.
Turn the power switch off and remove the power cord from the outlet. Open the side cover and front cover, in that order. Remove the TD cartridge and close the front cover and side cover, in that order.
To open and close the side cover and front cover, and to remove the TD cartridge, see "TD CARTRIDGE REPLACEMENT" (p.57).
Raise the handle of the paper tray and pull the paper tray out until it stops. Push the center of the pressure plate down until it locks in place and lock the plate using the pressure plate lock which has been stored in the front of the paper tray. Push the paper tray back into the unit. Lock the scan head locking switch (p.9).
When shipping the unit, the scan head locking switch must be locked to prevent shipping damage.
Close the multi-bypass tray and the paper output tray extension, and attach the packing materials and tape which were removed during installation of the unit. See "PREPARING THE UNIT FOR INSTALLATION" (p.8). Pack the unit into the carton. See "CHECKING PACKED COMPONENTS AND ACCESSORIES" (p.8).

Proper storage

Store the supplies in a location that is: clean and dry, at a stable temperature, not exposed to direct sunlight Store paper in the wrapper and lying flat. Paper stored out of the wrapper or in packages standing on end may curl or get damp, resulting in paper misfeeds.

SOFTWARE LICENSE

PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE. BY USING THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. 1. License.

5. Government End Users.

If you are acquiring the Software on behalf of any unit or agency of the United States Government, the following provisions apply. The Government agrees: (i) if the Software is supplied to the Department of Defense (DoD), the Software is classified as "Commercial Computer Software" and the Government is acquiring only "restricted rights" in the Software and its documentation as that term is defined in Clause 252.227-7013 (c)(1) of the DFARS; and (ii) if the Software is supplied to any unit or agency of the United States Government other than DoD, the Government's rights in the Software and its documentation will be as defined in Clause 52.22719 (c)(2) of the FAR or, in the case of NASA, in Clause 18-52.227-86 (d) of the NASA Supplement to the FAR.
6. Limited Warranty on Media.
SHARP warrants the disks on which the Software is recorded to be free from defects in materials and workmanship under normal use for a period of ninety (90) days from the date of purchase as evidenced by a copy of the receipt. The entire liability of SHARP and/or its Licensors and your exclusive remedy will be replacement of the disk which fails to meet the limited warranty provided by this Clause 6. A disk will be replaced when it is returned to SHARP or a SHARP authorized representative with a copy of the receipt. SHARP will have no responsibility to replace a disk damaged by accident, abuse or misapplication. ANY IMPLIED WARRANTIES ON THE DISKS, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO NINETY (90) DAYS FROM THE DATE OF DELIVERY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION.
7. Disclaimer of Warranty on Software.
You expressly acknowledge and agree that use of the Software is at your sole risk. The software and related documentation are provided "AS IS" and without warranty of any kind and SHARP and SHARP'S Licensor(s) (for the purpose of provisions 7 and 8, SHARP and SHARP'S Licensor(s) shall be collectively referred to as "SHARP") EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SHARP DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. FURTHERMORE, SHARP DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE OR RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SHARP OR A SHARP AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT SHARP OR A SHARP AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION, SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.

2. COMPOSITION/INFORMATION ON INGREDIENTS
Substance[ ] Preparation[X] CAS No. Proportion OSHA PEL ACGIH TLV Ingredient Styrene-Acrylate 29497-14-1 35-45% Not listed Not listed copolymer Styrene9003-53-6 35-45% Not listed Not listed homopolymer 3.5mg/m3 Carbon black 1333-86-4 5-10% 3.5mg/m3 Iron oxide 1309-38-2 5-10% Not listed Not listed Polypropylene 9010-79-1 1-5% Not listed Not listed parafrfine 8002-74-2 1-5% Not listed Not listed Metal Complex dye* 109125-51-1 <1% 0.5mg/m3 0.5mg/m3 84179-66-8 MAK-TWA NOHSC-TWA Not listed Not listed Not listed Not listed Not listed Not listed Not listed Not listed Not listed 3mg/m3 Not listed Not listed Not listed Not listed
*EC N0. : 400-110-2, Symbol letter : F, R Phrase : R11

Page: 2/4

3. HAZARDS IDENTIFICATION
Most Important Hazards and Effects of the Products Human Health Effects :There are no anticipated carcinogenic effects from exposure based on animal tests performed using toner. When used as intended according to instructions, studies do not indicate any symptoms of fibrosis will occur. Environmental Effects :No data are available. Specific hazards :Dust explosion (like most finely divided organic powders) Directive 1999/45/EC(Europe) :Not classified as dangerous

4. FIRST-AID MEASURES

Route(s) of Entry :Inhalation? Yes Inhalation Skin Contact Eye Contact Ingestion Skin? No Ingestion? Possible but very unusual.
:Remove to fresh air. If symptoms occur, consult medical personnel. :Wash with soap and water for 15 minutes or until particle is removed. If irritation does occur, consult medical personnel. :Flush eyes immediately with water for 15 minutes. If irritation does occur, consult medical personnel. :Rinse with water and drink several glasses of water. If irritation or discomfort does occur, consult medical personnel.
5. FIRE -FIGHTING MEASURES
Extinguishing Media :water, CO2, foam and dry chemicals Special Fire fighting Procedures :None Fire and Explosion Hazards :Toner material, like most finely divided organic powders, may form an explosive mixture.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions :None Environmental Precautions :None Methods for Cleaning Up :Wipe off with paper or cloth. Do not use vacuum cleaner when a large amount is released. It, like most finely divided organic powders, is capable of creating a dust explosion.

7. HANDLING AND STORAGE

Handling Technical Measures :None Precautions :None Safe Handling Advice :Use of a dust mask is recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust. Try not to disperse the particles. Storage Technical Measures :None Storage Conditions :Keep container closed and Store in a cool and dry place. Keep out of the reach of children. Incompatible Products:None

Page: 3/4

8. EXPOSURE CONTROL / PERSONAL PROTECTION

Acute Toxicity Ingestion (oral) Inhalation Eye irritation Skin irritation Skin sensitizer Mutagenicity Carcinogenicity :LD50 > 2000mg/kg (Rats) :LC50>5.14mg/L (Rats) :Not an irritant (Rabbits) :Not an irritant (Rabbits) :No data :Negative (Ames Test). :In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This classification is given to chemicals for which there is inadequate human evidence, but sufficient animal evidence on which to base an opinion of carcinogenicity. The classification is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats did not show any association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.
Date Issued : Sep. 1, 2003 MSDS No. F-01231 :In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m3) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m3) exposure group, but no pulmonary change was reported in the lowest (1mg/m3) exposure group, the most relevant level to potential human exposures.
13. DISPOSAL CONSIDERATIONS
Waste from Residues :Waste material may be dumped or incinerated under conditions which meet all federal, state and local environmental regulations. Contaminated Packaging :Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations.
NFPA Rating (USA) :Health=1 Flammability=1 Reactivity=0 WHMIS Legislation (Canada) :This product is not a controlled product. References IARC (1996) :IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65, Printing Process And Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149-261 H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-299. The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. However, all materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist.

doc1

SERVICE MANUAL

CODE : 00ZAL1641CS1E
DIGITAL LASER COPIER/ DIGITAL MULTIFUNCTIONAL SYSTEM

(AL-1641CS)

CONTENTS
AL-1631 AL-1641CS AL-1645CS
The AL-1631/AL-1641CS/AL-1645CS Service Manual describes only changed from AL-1215/AL-1530CS/AL-1540CS/AL-1551CS Service Manual. For the common contents, please refer to the AL-1215/AL-1530CS/AL-1540CS/ AL-1551CS Service Manual (Code: 00ZAL1551CS1E) MODEL 3 AL-1631 AL-1641CS AL-1645CS Reference MODEL AL-1215/AL-1540CS (SPF section) AL-1540CS/AL-1551CS (Duplex section) AL-1540CS (without SPF, with Duplex)
[ 1 ] GENERAL. 1 - 1 Parts Guide
Parts marked with are important for maintaining the safety of the machine. Be sure to replace these parts with the replacement parts specified to maintain the safety and performance of the machine.

SHARP CORPORATION

This document has been published to be used for after sales service only. The contents are subject to change without notice.

[1] GENERAL

1. Major functions

Configurations

Item Model AL-1631 AL-1641CS AL-1645CS CPM: SB/MB: 2 tray: SPF: R-SPF: Color scanner: GDI printer: PCL printer: SOPM: Duplex: Memory: FAX: CPM (LT) 16CPM 16CPM 16CPM SB/MB MB MB MB 2 Tray SPF R-SPF Color Scanner GDI printer PCL printer SOPM Duplex Memory 8M 16M 16M FAX

Descriptions of items

Copy speed (Copies Per Minute) SB = Manual feed single bypass, MB = Manual feed multi bypass Second cassette unit. Original feed unit Duplex original feed unit Color scanner function GDI printer function with USB. PCL printer function with USB. Scan Once Print Many function (Many copies are made by one scan.) Auto duplex copy/print function Standard page memory FAX function.

Descriptions of table

: Standard provision : No function or no option available Opt: Option
AL-1645CS AL-1631/AL-1641CS
AL-1631/1641CS/1645CS GENERAL 1 - 1

PARTS GUIDE

CODE:00ZAL1641CSP1
DIGITAL LASER COPIER / DIGITAL MULTIFUNCTIONAL SYSTEM
(For North America and LAG2)
CONTENTS Base plate unit 1 Base plate unit 2 Fusing unit Drive unit Multi manual paper feeding cover unit Multi manual paper feeding unit 250 sheets tray Harness Packing material & accessories Operation PWB MCU PWB Index

9 F G H I

[Note]
J K Original cover unit (AL-1645CS) L SPF exteriors (AL-1631/AL1641CS) SPF transport unit (AL-1631/AL1641CS) M O RSPF SPF pick up unit (AL-1631/AL1641CS) Q Operation panel T Side door unit U Optical frame X LSU unit Y Delivery paper guide unit Z

Exteriors Middle frame

The AL-1645CS/AL-1641CS/AL-1631 Parts Guide describes only changed from AL-1215/AL-1530CS/AL1540CS/ AL-1551CS Parts Guide. For the common parts, please refer to the AL-1215/AL-1530CS/AL1540CS/AL-1551CS Parts Guide (Code: 00ZAL1551CSP1)
MODEL 3 AL-1645CS AL-1641CS AL-1631
Reference MODEL AL-1215 AL-1530CS AL-1540CS AL-1551CS
Because parts marked with "!" is indispensable for the machine safety maintenance and poeration, it must Be replaced with the parts specific to the product specification.
This document has been published to be used for after sales service only. The contents are subject to change without ontice.

DEFINITION

The definition of each Rank is as follows and also noted in the list Rank A : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts Rank B : Performance/function parts (sensors, clutches, and other electrical parts), consumable parts Rank E : Unit parts including PWB Rank D : Preparation parts (External fitting, packing, parts packed together) Rank C : Parts other than the above (excluding sub components of PWB) Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with the parts specific to the product specification. F Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model. F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order. F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.

1 Exteriors

PARTS CODE
GCAB-0061QSZ1 GCOV-0045QSZ2 GCOV-0045QSZ3 CFIX-0021QS06 CFIX-0021QS11 GCAB-0062QSZ2 GCAB-0062QSZ3 GCAB-0026QSJ2 GCAB-0004QSJ1
PRICE NEW RANK MARK AK AG AG AG AH AN AL AZ AX
PART RANK D D D D D D D D D

DESCRIPTION

Left exterior Rear cover SPF Rear cover SPF Glass fixing plate Glass fixing plate Right exterior SPF Right exterior SPF Rear exterior SPF Rear exterior SPF (AL-1631/AL1641CS) (AL-1645CS) (AL-1631/AL1641CS) (AL-1645CS) (AL-1631/AL1641CS) (AL-1645CS) (AL-1631/AL1641CS) (AL-1645CS)

PRP01803

2 Original cover unit (AL-1645CS)

GCOVH0004QSJ1

PRICE NEW RANK MARK AX

PART RANK D OC cover M

PRP01804
5 SPF exteriors (AL-1631/AL1641CS)
LPLTP0011QSJ2 LPLTP0012QSJ2 PCUSS0025QSZ1
PRICE NEW RANK MARK AH AH AQ
PART RANK C Control plate F C Control plate R D OC mat

PRP01805

6 SPF transport unit (AL-1631/AL1641CS)
NBLTT0006QSZ1 NBLTT0003QSZ1 PGIDM0024QSZ3
PRICE NEW RANK MARK AE AF AN
PART RANK B Belt(83MXL4.8) B Belt(B91MXL4.8) C Transport paper guide

PRP01806

7 SPF pick up unit (AL-1631/AL1641CS)
LSTPP0001QSZ1 PPIPP0008QSZZ (Unit) 901 C F R M - R S 5 8
PRICE NEW RANK MARK AD AD BF
PART RANK C Paper stopper R C Clutch sleeve E SPF pick up unit

PRP01807

8 Operation panel
CPNLH0023QS0D CPNLH0023QS0E CPNLH0023QS0F CPNLH0023QS0G CBTN-0050QS02 CBTN-0050QS01 CPWBF0113QSF4 CPWBF0113QSF5
PRICE NEW RANK MARK AR N AR N AT N AT N AF AE BB N BB N
PART RANK D D D D E E E E
Panel Panel Panel Panel Operation Operation Operation Operation (AL-1631) (AL-1641CS) (AL-1645CS IN series) (AL-1645CS AB series) (AL-1631) (AL-1641CS/AL-1645CS) (AL-1631) (AL-1641CS/AL-1645CS)

key R key R PWB PWB

9 Side door unit

PRP01808

LPLTM0043QSZZ LPLTM0132QSZZ NSFTZ0006QSZZ XEPSD30P08X00 NGERH0048QSZZ NGERH0051QSZZ NROLP0025QSZZ MSPRC0050QSZZ NROLP1122FCZZ

PRICE NEW RANK MARK AD AH AG AA AE AE AM AB AF
PART RANK C C C C C C C C C
Earth plate Earth plate PS shaft Screw(38) DUP drive gear DUP drive gear A DUP drive roller DUP pressupe spring PS upper roller (AL-1631) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS)

PRP01809

F Optical frame
DUNT-0276QS11 MLOKZ0004QSZZ MLOKZ0004QSZ1 PGIDM0099QSZ1 PSHEZ0367QSZ1 PDUC-0005QSZ2 RCORF0018QSZZ PSHEZ0389QSZ1 DHAI-0268QSZ1 PSHEZ0401QSZ1 PTPE-0056QSZZ PMLT-0068QSZZ LFIX-0025QSZZ
PRICE NEW RANK MARK BT AD AD AH AD N AD N AR AK AH AG N AD N AC AG N
PART RANK E C C C C C C C C C C C C
Carriage unit Carriage lock Carriage lock Paper guide Cable fixing sheet Fan duct JAG FFC core Scanner sheet CCD-MCU harness Scanner core sheet Double-sided tape Core holder malt CCD harness fixing plate (AL-1631/AL-1641CS) (AL-1645CS)

PRP01810

G LSU unit

DHAI-0282QSZ1

PRICE NEW RANK MARK AG

PART RANK C LSU harness

PRP01811
H Delivery paper guide unit
PGIDM0006QSZ3 DHAI-0282QSZ1
PRICE NEW RANK MARK AM AG
PART RANK C Delivery paper guide C LSU harness

PRP01812

I Middle frame
NBLT-0005QSZZ MSPRC0330QSZZ NFANP0005QSZ2 PGIDM0009QSZ1 LPLTM0133QSZ1 PSPAZ0017QSZZ XEBSD30P10000 XHBSE30P06000 RMOTP0012QSZZ PSHEZ0156QSZZ NBLTT0004QSZ1 PSHEZ0155QSZZ
PRICE NEW RANK MARK AH AC AU AG AE AK AA AA AW AE AF AD
PART RANK B C B C C C C C B C B C
Delivery roller drive belt Hopper spring Fan Harness guide DUP motor sink DUP spacer Screw(310) Screw(36) DUP transport motor Harness protection sheet Belt Sheet (AL-1631)
(AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS)

PRP01813

J Base plate unit 1
QSW-B0017QSZZ LRALP0001QSJ2
PRICE NEW RANK MARK AF AM
PART RANK B Tray detect switch C Base plate rail R

PRP01814

K Base plate unit 2
CPWBX0121QS49 CPWBF0114QSE1 DHAI-0283QSZZ RCORF0026QSZZ
PRICE NEW RANK MARK BY N BA AD AE

PART RANK E E C C

MCU PWB IF PWB MCU-I/F harness Ferrite core (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS) (AL-1641CS/AL-1645CS)

PRP01815

L Fusing unit
CTME-0229FC04 DHAI-0278QSZ1 LBNDJ0037FCZ1 NROLI0014QSZ3 LFRM-0005QSZ1
PRICE NEW RANK MARK AG AK AA BA AQ

PART RANK C C C C D

Separator pawl HL harness 2 Wire band Heart roller Fusing lower frame (100V Series)

PRP01816

M Drive unit
MSPRC0053QSZ1 NGERH0050QSZZ NPLYZ0002QSZZ NGERH0008QSZ3 (Unit) CPLTM0042RSCPLTM0042RS56
PRICE NEW RANK MARK AC AD AC AL BM BM

PART RANK C C C C E E

Pulley spring Ratchet gear(33T) Pulley(17T) Gear(55/19T) Drive unit[Except No.27] Drive unit[Except No.27] (AL-1631) (AL-1631) (AL-1631)
(AL-1631) (AL-1641CS/AL-1645CS)

PRP01817

O Multi manual paper feeding cover unit

CSW-M0016RS51

PART RANK E Side door detect switch unit

PRP01818

Q Multi manual paper feeding unit
PGIDM0014QSJ1 MHNG-0002QSZ1 PCOVP0019QSJ2 LSOU-0002QSJ1 LSOU-0003QSJ1
PRICE NEW RANK MARK AF AC AL AL AH

PART RANK C C D D D

DUP upper guide Arm hinge Multi tray front cover Multi tray 1 Multi tray 2

PRP01819

T 250 sheets tray
LPLTM2642FCG2 LPLTP5107FCZ1 LPLTP5108FCZ1 LSTPP0161FCZ1 GCASP0001QSJ3
PRICE NEW RANK MARK AD AG AG AB AZ
Tray rear plate 250 tray side plate F 250 tray side plate R Rotation plate stopper 250 Tray case

PRP01820

U Harness
DHAI-0283QSZZ DHAI-0278QSZ1
PRICE NEW RANK MARK AD AK
PART RANK C MCU-I/F harness C HL harness 2
(AL-1641CS/AL-1645CS) (100V Series)

PRP01821

X Packing material & accessories
SPAKA0409QSZZ SPAKA0408QSZZ TINSE1161QSZZ TINSS1172QSZZ SPAKA0406QSZZ SPAKA0405QSZZ SPAKC0403RS20 SPAKC0403RS21 SPAKC0402RS35 SPAKA0064RSZ1 SPAKA0051RSZZ TTAG-0006QSZ1 CLEVP0016QS02 SPAKA0432QSZZ CDSKA0019QS39 CDSKA0019QS40 SSAKA0430QCZZ
PRICE NEW RANK MARK AR AN AS N AY N AS AN AY N AY N AY N AC AC AD AF AC BC N AN N AA
PART RANK D D D D D D D D D D D D C D D D D
Top packing SPF Top packing SPF Operation manual Operation manual Bottom packing Bottom packing Packing case Packing case Packing case OC packing(SPF) OC packing(SPF) Scanner fixing tag JAG Pressure block lever SPF protect sheetn JAG CD-ROM CD-ROM Vinyl bag(80450) (AL-1631/AL-1641CS) (AL-1645CS) (AL-1631/AL-1641CS) (AL-1645CS) (AL-1631/AL-1641CS) (AL-1645CS) (AL-1631) (AL-1641CS) (AL-1645CS) (AL-1631/AL-1641CS) (AL-1645CS)
(AL-1631/AL-1641CS) (AL-1641CS) (AL-1645CS) (AL-1645CS AB Series Panel only)

PRP01822

Y Operation PWB

QSW-P0001ESZZ QSW-P0001ESZZ QSW-P0001ESZZ QSW-P0001ESZZ VHD1SS133++-1 VHP1LHEE-002A VHP1LHLE-002A VHP1LHLE-002A VHP1LHLE-002A VHP1LHLE-002A VHP1LHLE-002A VRS-CY1JD102J VRS-CY1JD102J (Unit) CPWBF0113QSF4 CPWBF0113QSF5
PRICE NEW RANK MARK AC AC AC AC AA AC AC AC AC AC AC AA AA BB BB N N
PART RANK B B B B B B B B B B B C C E E
Tact swtch(SKQNAB010) Tact swtch(SKQNAB010) Tact swtch(SKQNAB010) Tact swtch(SKQNAB010) Diode(1SS133) LED(Red)(1LHEE-002A) LED(Green)(LTL-1LHLE-002A) LED(Green)(LTL-1LHLE-002A) LED(Green)(LTL-1LHLE-002A) LED(Green)(LTL-1LHLE-002A) LED(Green)(LTL-1LHLE-002A) Resistor(1/16W 1.0K 5%) Resistor(1/16W 1.0K 5%) Operation PWB Operation PWB [CLK,PSW,1UPK,10UPK,ZUPK] [ZDWK,MAGK,CRSK,BPK,EXUPK] [EXDWK,EXMODK] (AL-1641CS/AL-1645CS)[OLK,DUPK,SCNK] [D301310] [SJAL,TPL,DPL,JPL] [RPL,PML,ZPL,2ENR,1ENR] [NOR,1RE,2RE,3RE,SPFL] [CS1L,BPL,EXD,EXN] [EXL,AE,ME,PE] (AL-1641CS/AL-1645CS)[ONLL,SCNL,DAA1,DAA2] [R317,335,338,340] [R352,357,360] (AL-1631) (AL-1641CS/AL-1645CS)

Z MCU PWB

QCNCM2401SC0D RCRUB0013QSZ1 RFILZ0004QSZZ RFILZ0004QSZZ TLABZ4201FCZZ VCCCCZ1HH470J VCCCCZ1HH470J VCKYCY1HB104K VCKYCY1HB104K VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VHDKDS121++-1 VHDKDS121++-1 VHIP2010ASR-1 VRS-CY1JD103J VRS-CY1JD103J VRS-CY1JD103J VRS-CY1JD103J VRS-CY1JD103J VRS-CY1JD103J VRS-CY1JD103J VRS-CY1JD103J VRS-CY1JD103J VRS-CZ1JD562J VRS-HT3DA101J RFILN0043FCZZ VCCCCY1HH470J VHDKDS120++-1 VHDKDS120++-1 VSKTC3198++-1 (Unit) CPWBX0121QS49
PRICE NEW RANK MARK AC AN AM AM AC AA AA AA AA AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AC AC AN AA AA AA AA AA AA AA AA AA AA AA AC AA AC AC AB BY N
PART RANK C B C C D C C C C C C C C C C C C C C C C C C C C B B B C C C C C C C C C C C C C B B B E
Connector(4pin) Cristal(24MHz) Filter(ZJSR5101-223) Filter(ZJSR5101-223) Version label Capacitor(50WV 47pF) Capacitor(50WV 47pF) Capacitor(50WV 0.10F) Capacitor(50WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Capacitor(16WV 0.10F) Diode(KDS121) Diode(KDS121) IC(P2010ASR) Resistor(1/16W 10K 5%) Resistor(1/16W 10K 5%) Resistor(1/16W 10K 5%) Resistor(1/16W 10K 5%) Resistor(1/16W 10K 5%) Resistor(1/16W 10K 5%) Resistor(1/16W 10K 5%) Resistor(1/16W 10K 5%) Resistor(1/16W 10K 5%) Resistor(1/16W 5.6K 5%) Resistor(2W 100 5%) Filter(ZJSR5101-102) Capacitor(50WV 47PF) Diode(KDS120 RTK) Diode(KDS120 RTK) Transistor(KTC3198+) MCU PWB [CN106,CN103] [X102] [L101,L113,L123,L124,L125] [L126,L127] [For IC111] [C126,C315,C316,C317,C318] [C319,C320,C321,C166,C341] [C277,C313,C314,C339,C209,C210] [C213,C334,C335,C301] [C101,C107,C108,C110,C111] [C112,C113,C114,C115,C124] [C128,C129,C130,C131,C132] [C133,C134,C135,C136,C137] [C138,C140,C141,C142,C143] [C144,C145,C146,C147,C148] [C149,C150,C151,C152,C153] [C154,C155,C156,C157,C158] [C159,C160,C161,C162,C164] [C168,C170,C173,C176,C177] [C178,C179,C180,C181,C182] [C183,C184,C185,C187,C189] [C193,CA95,C196,C198,C199] [C205,C207,C220,C260,C283] [C285,C288,C289,C308,C323] [C328] [D116,D117,D118,D125,D126] [D130,D131,D132,D136] [IC101] [R108,R111,R112,R115,R122] [R123,R124,R125,R126,R127] [R128,R137,R140,R141,R146] [R147,R148,R172,R189,R208] [R209,R210,R212,R213,R221] [R222,R224,R228,R233,R234] [R238,R242,R248,R249,R250] [R266,R263,R269,R271,R283] [R284,R290,R286] [R239] [R225] [L103,L110] [C336] [D121,D122,D123,D128,D129] [D133,D134,D135,D137] [Q109]

8- 5 8- 5 28- 102 28- 103 1- 13 1- 13 7- 901 28- 17 17- 901 17- 901 8- 1 8- 1 8- 1 8- 1 29- 901 8- 8 29- 901 8- 8 15- 5 15- 4 30- 901 19- 4 16- 21
PRICE NEW PART RANK MARK RANK
NROLP0025QSZZ NROLP1122FCZZ NSFTZ0006QSZZ [P] PCOVP0019QSJ2 PCUSS0025QSZ1 PDUC-0005QSZ2 PGIDM0006QSZ3 PGIDM0009QSZ1 PGIDM0014QSJ1 PGIDM0024QSZ3 PGIDM0099QSZ1 PMLT-0068QSZZ PPIPP0008QSZZ PSHEZ0155QSZZ PSHEZ0156QSZZ PSHEZ0367QSZ1 PSHEZ0389QSZ1 PSHEZ0401QSZ1 PSPAZ0017QSZZ PTPE-0056QSZZ [Q] QCNCM2401SC0D QSW-B0017QSZZ QSW-P0001ESZZ [R] RCORF0018QSZZ RCORF0026QSZZ RCRUB0013QSZ1 RFILN0043FCZZ RFILZ0004QSZZ RMOTP0012QSZZ [S] SPAKA0051RSZZ SPAKA0064RSZ1 SPAKA0405QSZZ SPAKA0406QSZZ SPAKA0408QSZZ SPAKA0409QSZZ SPAKA0432QSZZ SPAKC0402RS35 SPAKC0403RS20 SPAKC0403RS21 SSAKA0430QCZZ [T] TINSE1161QSZZ TINSS1172QSZZ TLABZ4201FCZZ TTAG-0006QSZ1 [V] VCCCCY1HH470J VCCCCZ1HH470J VCKYCY1HB104K VCKYCZ1CF104Z VHD1SS133++-1 VHDKDS120++-1 VHDKDS121++-1 VHIP2010ASR-1 VHP1LHEE-002A VHP1LHLE-002A VRS-CY1JD102J VRS-CY1JD103J VRS-CZ1JD562J VRS-HT3DA101J VSKTC3198++-1 [X] XEBSD30P10000 XEPSD30P08X00 XHBSE30P06000

9- 24 9- 26 9- 32 45

[C] CBTN-0050QS01 CBTN-0050QS02 CDSKA0019QS39 CDSKA0019QS40 CFIX-0021QS06 CFIX-0021QS11 CFRM-0011RS58 CLEVP0016QS02 CPLTM0042RS55 CPLTM0042RS56 CPNLH0023QS0D CPNLH0023QS0E CPNLH0023QS0F CPNLH0023QS0G CPWBF0113QSF4 " CPWBF0113QSF5 " CPWBF0114QSE1 CPWBX0121QS49 " CSW-M0016RS51 CTME-0229FC04 [D] DHAI-0268QSZ1 DHAI-0278QSZ1 " DHAI-0282QSZ1 " DHAI-0283QSZZ " DUNT-0276QS11 [G] GCAB-0004QSJ1 GCAB-0026QSJ2 GCAB-0061QSZ1 GCAB-0062QSZ2 GCAB-0062QSZ3 GCASP0001QSJ3 GCOV-0045QSZ2 GCOV-0045QSZ3 GCOVH0004QSJ1 [L] LBNDJ0037FCZ1 LFIX-0025QSZZ LFRM-0005QSZ1 LPLTM0043QSZZ LPLTM0132QSZZ LPLTM0133QSZ1 LPLTM2642FCG2 LPLTP0011QSJ2 LPLTP0012QSJ2 LPLTP5107FCZ1 LPLTP5108FCZ1 LRALP0001QSJ2 LSOU-0002QSJ1 LSOU-0003QSJ1 LSTPP0001QSZ1 LSTPP0161FCZ1 [M] MHNG-0002QSZ1 MLOKZ0004QSZ1 MLOKZ0004QSZZ MSPRC0050QSZZ MSPRC0053QSZ1 MSPRC0330QSZZ [N] NBLT-0005QSZZ NBLTT0003QSZ1 NBLTT0004QSZ1 NBLTT0006QSZ1 NFANP0005QSZ2 NGERH0008QSZ3 NGERH0048QSZZ NGERH0050QSZZ NGERH0051QSZZ NPLYZ0002QSZZ NROLI0014QSZ3
AM AF AG AL AQ AD AM AG AF AN AH AC AD AD AE AD AK AG AK AD AC AF AC AR AE AN AC AM AW AC AC AN AS AN AR AC AY AY AY AA AS AY AC AD AA AA AA AB AA AC AC AN AC AC AA AA AA AA AB AA AA AA
C C C D D C C C C C C C C C C C C C C C C B B C C B C C B D D D D D D D D D D D D D D D C C C C B B B B B B C C C C B C C C
AE AF BC AN AG AH BF AF BM BM AR AR AT AT BB BB BB BB BA BY BY AG AG AH AK AK AG AG AD AD BT AX AZ AK AN AL AZ AG AG AX AA AG AQ AD AH AE AD AH AH AG AG AM AL AH AD AB AC AD AD AB AC AC AH AF AF AE AU AL AE AD AE AC BA

N N N N N N N N N N

E E D D D D E C E E D D D D E E E E E E E E C C C C C C C C E D D D D D D D D D C C D C C C C C C C C C D D C C C C C C C C B B B B B C C C C C C
30- 8 14- 26 29- 3 10- 32 15- 31 30- 24 30- 126 30- 26 13- 35 28- 14 28- 14 28- 9 28- 9 28- 1 28- 1 28- 23 28- 10 28- 10 28- 10 28- 104 28- 7 28- 7 30- 36 28- 15 30- 127 30- 41 30- 49 30- 51 29- 9 30- 128 30- 56 30- 76 29- 12 29- 13 29- 16 30- 90 30- 109 30- 120 30- 129 13- 33 9- 21 13- 34

All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic; mechanical; photocopying; recording or otherwise without prior written permission of the publisher.
Trademark acknowledgements
Microsoft Windows operating system is a trademark or copyright of Microsoft Corporation in the U.S.A. and other countries. Windows 95, Windows 98, Windows Me, Windows NT 4.0, Windows 2000, and Windows XP are trademarks or copyrights of Microsoft Corporation in the U.S.A. and other countries. IBM and PC/AT are trademarks of International Business Machines Corporation. Acrobat Reader Copyright 1987- 2002 Adobe Systems Incorporated. All rights reserved. Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated. All other trademarks and copyrights are the property of their respective owners.
SHARP CORPORATION Digital Document System Group Products Quality Assurance Department Yamatokoriyama, Nara 639-1186, Japan
2003 November Printed in Japan

 

Technical specifications

General
Device TypeCopier
Copier TypeDigital
Printing TechnologyLaser - monochrome
Width20.4 in
Depth19.4 in
Height15 in
Weight41.9 lbs
Copying
Max Copying SpeedUp to 16 ppm
Max Copying ResolutionUp to 600 x 600 dpi
Gray Scale Half-Tones256
Max Document Enlargement400%
Max Document Reduction25%
Document & Media Handling
Max Original SizeLegal (8.5 in x 14 in)
Original TypeSheets
Document Feeder Capacity30 sheets
Min Copy Size3.5 in x 5.5 in
Max Copy SizeLegal (8.5 in x 14 in)
Supported Media TypePlain paper
Standard Media Capacity250 sheets
Bypass Feeder Capacity50 sheets
Document & Media Handling DetailsPaper cassette - 250 sheets Bypass tray - 50 sheets ADF - 30 sheets
Power
Power Consumption Operational1000 Watt
Miscellaneous
First Copy Out Time B/W9.6 sec
Universal Product Identifiers
BrandSharp
Part NumberAL-1631
GTIN00074000074651

 

Tags

FS200 VVX 2000 VZ800 Digital Laser Copier System MS-7528 SGH-C260L Strd311 PN50C680g5F 50PC3D Error Codes Audition 1 RS 2400 KX-FP320E Urei 525 E1000 KX-TCD545GM Omniswitch CLI HTS3500S Lugf02-90-S LE32A451 F12560QD Kdnx5000J-KD-nx5000 DNS3000 DCR-TRV410 H4 Error MRP-F300 F65010IM VGC-LM2E SA-XR25 SA10003 LC-32D43U PD-F605 Navirad V1 A-965 DS Lite HDR-CX500V ZB403 I845 Aerodr Perfection V10 CQ-C1100VN CAR KIT SE-150PCI TX-21S3T DFX-8000 GD910 50PG3500 QC5170 7600DYE Servers 800- 1000 SPH-A660 NP-N220-ja01 Restoreit 7 B 321 Deskjet 5100 M1000 LA26C450e1M PSS16 TS-4N PRO PSR-S900-s700 W1100 SD254 PM-3000 Drum Pentax SF1 272 C 29FD1RL VP-L700U Ypg-635 F350-2005 Machine CDX-2180 DES-815 KH 2355 1700-500 335 CH Clock Pocket DJ 114EQ X-18H Repair K510I CDA-9825 Toner DCR-HC28E 52DC2D Stylus 1000 Journe F810 EWV601 Nokia 6234 Fuser Black ASH NN-CT857 ICF-SW1000T Vintage2-AE1 Samsung I450 Navpilot 520 GR-D30 XD-AX10 Driver CVP-109-CVP-107-cvp-105 DSC-T100 C534N AQ09NSA Powermax 230 Model 4073

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101