AR-150E

CODE: 00ZAR150E/A2E

DIGITAL COPIER

AR-120E AR-150E
This Service Manual describes only the differences from the AL-1000. For the common items with the AL-1000, please refer to the AL-1000 manual.

CONTENTS

[ 1 ] GENERAL

. 1 - 1

[ 2 ] SPECIFICATIONS. 2 - 1 [ 3 ] CONSUMABLE PARTS. 3 - 1 [ 4 ] SIMULATIONS. 4 - 1 G PARTS GUIDE
Parts marked with are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

SHARP CORPORATION

This document has been published to be used for after sales service only. The contents are subject to change without notice.

[1] GENERAL

1. Major functions
Item CPM Model AR-120E AR-150E 12CPM 15CPM SB SB SB/MB 2 Tray SPF R-SPF FAX GDI with USB GDI without USB Opt Opt PCL with USB SOPM Duplex
Descriptions of items CPM: Copy speed (Copies Per Minute) SB/MB: SB = Manual feed single bypass, MB = Manual feed multi bypass 2 tray: Second cassette unit. SPF: Original feed unit R-SPF: Duplex original feed unit FAX: FAX function. GDI with USB: GDI printer function with USB. GDI without USB: GDI printer function without USB. PCL with USB: PCL printer function with USB. SOPM: Scan Once Print Many function (Many copies are made by one scan.) Duplex: Auto duplex copy function Descriptions of table : Standard provision : No function or no option available

2. System Configuration

(AR-120E)
Options (AL-10PK/AL-11PK)
Printer board. 1 Memory. 1

(AR-150E)

Printer driver (CD-ROM). 1

Screwdriver. 1

Screws. 4

Operation manual. 1

Interface cable. 1 (for IBM PC/AT or compatible computers)
AR-150E, the memory has been already installed in the machine and is not supplied in the printer upgrade kit(AL-10PK). 1 1

[2] SPECIFICATIONS

1. Copy mode

A. Type

Type Desk-top
(1) Paper feed section of the copier
Paper feed size Paper feed capacity Detection Weight A4, B5, A5, 8.5" 14", 8.5" 11", 8.5" 5.5" 250 sheets (56 80g/m2 equivalent) (lbs.) Paper empty detection available 56 80g/m2 (15 lbs. 21 lbs.) Recycled paper

B. Machine composition

AR-120E AR-150E 12 cpm / 1 tray / SB 15 cpm / 1 tray / SB / SOPM

Special paper

(2) Manual paper feed section
Paper feed size A4 A6, 11" 17" 8.5" 5.5" 1 sheets (Single bypass feed tray) Size detection not available, paper empty detection available 52 128g/m2 (lbs.) Recycled paper, OHP film, labels Paper feed capacity Detection Weight Special paper

(1) Option

Machine GDI printer expansion kit Model AL-10PK (for AR-150E) AL-11PK (AR-120E) Power supply Supplied by the copier. Supplied by the copier.

C. Copy speed

(1) Continuous copy speed (Sheets/min)
a. AR-120E Paper size AB system Inch system A4 B5 8.5" 14" 8.5" 11" Normal Enlargement (200%) Reduction (50%) 10 12

G. Multi copy

Max. number of multi copy 99 sheets

H. Warmup time

Warmup time Pre-heat Approx. 0 sec (Condition: Standard condition) Available
I. Copy magnification ratio
Fixed magnification ratio AB system: 50, 70, 81, 100, 141, 200% Inch system: 50, 64, 78, 100, 129, 200% 50 200%
b. AR-150E Paper size AB system Inch system A4 B5 8.5" 14" 8.5" 11" Normal Enlargement (200%) Reduction (50%) 12 15

Zooming

J. Print density
Density mode No. of manual adjustment Auto/Manual/Photo 5 steps (Manual/Photo)

D. First copy time

First copy time 9.6 sec

K. Void width

Void area Image loss Leading edge Lead edge 1 4mm, rear edge 4mm or less, both sides 4mm or less Same size: 3.0mm or less Enlarge: 1.5mm or less Reduction: 6.0mm or less

E. Document

Max. document size Document reference position Detection (Platen) B4, 10" 14" Left side center None

L. Auto duplex

Standard/Option Not installable

F. Paper feed

Copy size (Max. Min.) Paper feed system (A4 A6) 8.5" 14" 8.5" 5.5" AR-120E AR-150E 1 cassette + Single manual paper feed

M. Paper exit/finishing

Paper exit section capacity Face down 100 sheets

N. Additional functions

Auto paper selection (APS) Auto magnification ratio selection Binding margin 1 set 2 copy Edge erase Center erase Cover insertion Index paper insertion OHP index paper insertion Job memory Auditor Key operator program Communication conformity Process control Toner save mode Pre-heat mode Auto power shut off mode No No No No No No No No No No No No No No Yes (Time setup/cancel can be made with the user simulation.) Yes (Time setup can be made with the user simulation.) Yes (Time setup/cancel can be made with the user simulation.)

S. Power consumption

Max. power consumption About 1.0KWh EnergyStar standard (The second level conformity) Pre-heat Auto power shut off About 40Wh 18wh

T. Digital performance

Resolution Reading Writing Gradation 400 dpi 600 dpi 256 gradations / 8 bits

U. Maintenance lamp

The maintenance lamp is provided in this model. (Not provided in the AL series)

O. Other specifications

Photoconductor type Photoconductor drum dia. Copy lamp Developing system Charging system Transfer system Separation system Fusing system Cleaning system OPC (Organic Photo Conductor) 30mm Xenon lamp Dry 2-component magnetic brush development Saw teeth charging (+) DC corotron () DC corotron Heat roller Contact blade

P. Package form

Body Body/Accessaries

Q. External view

External dimensions (W D H) Occupying area (W D) Weight 292.445mm 607.6 445mm (AR-120E/150E) about 17.2 kg (AR-120E/150E)

R. Power source

Voltage Frequency AC110V/120V/127V/220V/230V/240V 50/60Hz common

[3] CONSUMABLE PARTS

1. Supply system table

A. Middle East, Africa

NO 1 Name Developer cartridge (Black) <With IC> Content Toner/developer cartridge (Toner 238g, Developer 190g) IC chip Polyethene Bag Drum cartridge Tonar/developer Kit (Black) <with IC> Drum cartridge Polyethene Bag Toner bottle (Toner 228g) Filling Hose IC chip Toner cap Developer bottle (Developer 190g) DV blade 8 Waste toner box Protective cover Drum kit Blade kit Toner kit Waste toner box MG cover Drum Drum fixing plate Blade Brush sheet (F/R) Toner bottle (Toner 228g) Filling Hose Toner cap Each 72K AR-150LT 1 Life setting by A4 6% document AR-150CB 1 250K AR-150TB AR-150MG AR-150LR 1 72K DM-150LI 1 Life setting by A4 6% document 25K AR-150DM 5 Life 7.2K Product name AR-150DC Package 5 Remark Life setting by A4 6% document

B. LAG (Latin America)

NO 1 DV unit Name Developer unit Content 1 Life 1 Product name AR-151DW Package 10 Remark 1Usable corresponding to 5 times of remanufacturing
Drum cartridge Tonar/developer Kit (Black)
Drum cartridge Polyethene Bag Toner bottle (Toner 228g) Filling Hose IC chip Toner cap Developer bottle (Developer 190g) DV blade

10 Each 1 10

25K 78K

AR-151DM DM-151LI

Life setting by A4 6% document
Waste toner box Protective cover Drum kit
Waste toner box MG cover Drum Drum fixing plate
AR-150TB AR-150MG 250K AR-150LR

1 AR151LR = AR151RL 10

Blade kit Toner kit
Blade Brush sheet (F/R) Toner bottle (Toner 228g) Filling Hose Toner cap

AR-150CB 78K AR-150LT

2. Consumable parts refill procedure
[External view check points] Check for breakage of the four pins (*) and the ATC sensor connector of the DV BOX unit.
2) Remove the DVF cover unit. When removing, be careful not to break the two pins.

ATC sensor connector

Check for breakage of molt and suede. (For reattachment, refer to the reattachment procedure.)
3) Remove the THBOX unit.

DV molt F

DV molt

DV molt R

Side sheet F

Side sheet R

A. TD cartridge
1) Remove the waste toner box unit
4) Remove the DV blade. Remove excessive glue. Remove together with the base PET.
AR-150E 5) Tilt the DV box unit and rotate the DV18T clockwise to remove developer. 11) Face the toner supply port of the TH box unit upward, and press and insert the refill hose into the toner supply port with the toner bottle kept straight up. Hold the left side of the TH box with your hand. Press and insert the refill hose completely.
6) Clean the DV box unit by sucking or blowing with a vacuum cleaner to remove developer from the MG roller and toner from the DV box unit. Check that there is no toner or no foreign material attached to the connector and the gear. 7) Shake the developer bottle 10 times up and down, and remove the bottle cap and supply developer into the DV box unit. Slowly slant the bottle to supply developer evenly. Check the label to insure that developer is suitable for the model.
12) Lift the toner bottle and shake it left and right and supply toner until the bottle and the filling hose are empty. It takes about one minute to fill toner completely in TH BOX UN from lifting the toner bottle to emptying the bottle and the hose. If toner remains in the hose, when removing the hose from TH BOX UN, the remaining toner may disperse. Use great care for that.
8) Install the THBOX unit. Insert two bosses of TH box on the drive side into the positioning hole of the DV box and fix together. 9) Remove the toner cap, look into the toner supply port and stop the THD Mylar at the position shown in the figure below. (Rotate the THK gear on the rear side of the TH box counterclockwise to rotate the TM shaft.) 10) Shake the toner box 20 times up and down, and remove the bottle cap and install the refill hose. Check the label to insure that toner is suitable for the model.
13) Check that there is no toner remaining in the bottle and remove the hose, and slowly pull and remove the hose. (If there is any toner remaining in the bottle or the hose, perform toner supply again.) Bend the refill hose and remove it from the TH box unit without dispersing toner. Attach the toner cap. Attach the toner cap with the toner supply port of the TH box unit faced upward. 14) Clean the DV box unit with alcohol and attach the DV blade. After drying the unit, attach the DV blade. After attachment, check that there is no scratch and waves on the DV blade. After attachment, be careful not to damage the DV blade. Check that there is no foreign material in the DV blade and the section.

15) Install the DVF cover to the DV-TH box unit. 16) Clean the waste toner box unit and install it to the DV box unit. (Check that there is no toner in the waste toner box) Be careful of the pawl.
AR-150E 17) Replace the IC connector. Check that there is no oil on the IC connector pins. (Do not touch with fingers.)
Put a white mark on the above position. At that time, put marking for checking of the number of refilling. 18) Check the operations of the DV lever and the toner box shutter. 19) Shake the DV box unit 5 times horizontally. Rotate the DV18T clockwise and check developer state on the MG roller. (Visually check that developer state is normal and there is no foreign material.) 20) Install the MG cover. Put the unit straight with the MG roller on the upper side. Rotate the DV18T several times forward and reverse to store developer on the MG roller into the inside. Check that there is no developer on the MG roller surface, and install the MG cover. Note: When attaching the MG cover, be careful not to wind around the DV blade.
Note for MG cover installation When installing, check that there is no breakage and peel-off of the MG cover sheet and the MG cover molt attached to the MG cover. Check that there is no winding into the DV blade, deformation and scratches of DV molt F and R.
[The reattachment procedure]
Remove the side sheets on the both sides of DV box unit. Clean the DV box unit with alcohol and reattach the side sheets F and R to the both sides.

0.0 0.5

DV box unit F side

DV box unit R side

.Remove glue completely before reattaching.After drying alcohol, attach the side sheet F,R.
Remove the DV molt F,R and DV molt and clean with alcohol. After attaching the DV molt F and R, attach the DV molt with the DV molt R edge as the reference.
DV molt F attachment reference (DV box edge) DV molt attachment 0 reference (DV box edge)
DV molt R attachment 0.5 reference (DV box edge)
DV molt attachment reference (DV box edge) 0.5
DV molt attachment reference (DV box edge)
.Do not allow clearance between DV molt and DV molt F. (Pull and attach them. Overlap may be allowed.).Remove glue completely before reattaching.After drying alcohol, attach the DV side sheet. When attaching the DV molt F, projection in the arrow direction is not allowed. When attaching the DV molt R, 0 projection in the arrow direction is not allowed. 0.5

B. Drum unit

1) Check the external view. Check for damage or cracks on the boss and the boss hole. Check to insure that the waste toner pipe shutter slides smoothly. Check to insure that the star ring and the CRU washer rotate smoothly.
3) Remove the drum fixing plate and the photoconductor drum. (Note) Dispose the drum fixing plate which was removed.

LO C K

4) Check the cleaning blade and the red felt for no damage. If there is any damage, execute all procedures from item 5) and later. If there is no damage, execute the procedure of item 12). 5) Remove the main charger. (Cleaning the screen grid and the sawteeth.)
2) Remove the drum cover. (4 Lock Tabs)
6) Remove the cleaning blade. Note: Dispose the cleaning blade which was removed.
AR-150E 7) Clean the cleaning section and the waste toner pipe to remove waste toner completely with a vacuum cleaner. 8) Remove the felt and duplex tape completely. Note: Be careful not to scratch or bend the sub blade. 9) Attach the cleaning blade. Securely insert the plate section of the cleaning blade into the dove and fix it with a screw. Do not touch the cleaning blade rubber with your hand. When attaching the cleaning blade, press the cleaning blade in the arrow direction and attach. 12) Attach the drum fixing plate and the photoconductor drum. Apply grease to the inside of the photoconductor drum. (Dia. 2)

10) Attach the felt.

Attach the drum from (b). (Prevention against the sub blade edge breakage) Attach the drum so that its position with the sub blade is as shown. 13) Attach the detection gear. Note: The detection gear is not installed to the drum cartridge packed with the main body. Add a new one.
Attach the mocket with slightly pressing section A of the cleaning blade. Do not touch the tip of the cleaning blade. Do not put the mocket under the cleaning blade. Do not put the mocket on the sub blade. Do not press the sub blade with the mocket. 11) Attach the main charger. Securely set the MC holder on the projection of the process frame. Securely insert two projections of the MC holder into the groove in the process frame. When attaching the MC holder assy, be careful not to make contact with the cleaning blade.

14) Attach the drum cover. Note: After attaching the drum cover, do not make a copy. When attaching the drum cover, engage the detection gear 20T rib with the 30T gear rib, and attach the drum cover to the process frame. 15) Mark the number of times of recycling on the side of the cover with white paint. Max. times of recycling: 5 times
Note: Another method of cleaning the drum counter is available with SIM 24-07.

[4] SIMULATIONS

The following items are added in this model. (Not provided in the AL series.)

1. List of simulations

Main code 5 Lamp ON check Sub code 01 Maintenance cycle setup Contents Operation panel display check (Maintenance lamp added) Fusing lamp ON + cooling fan high speed/low speed Copy lamp ON
Maintenance counter clear Counter setup (In maintenance) Counter display
Maintenance counter Maintenance preset value Total counter Drum counter P-ROM version display Scanner counter
2. Contents of simulations
Main code Sub code Contents Maintenance counter clear Maintenance cycle setup Details of operation When the PRINT switch is pressed, the maintenance count value is cleared and the value (000000) is displayed. The code of the currently set maintenance cycle value is displayed (initial display), and the set data is stored. Key operation/Display Code 02 Maintenance counter display Maintenance reset value display Total counter display 3,000 pages 6,000 pages 9,000 pages 13,000 pages 18,000 pages Free (999,999 pages) Default Setup
The display method is similar to the total counter display. The quantity corresponding to the code set with 21-01 is displayed. The display method is similar to the total counter display. The total counter value is displayed in 3 digits x 2 times repeatedly. Display (example: 12345) 012 Blank 345 Blank 012 0.7s 0.3s 0.7s 1.0s 0.7s
Drum counter display P-ROM version display Scanner counter display
The display method is similar to the total counter display. The P-ROM version is displayed in 3 digits on the value display section. (In the AR model, the 100% zoom lamp is displayed.) The display method is similar to the total counter display.
COPYRIGHT 1999 BY SHARP CORPORATION
All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

AR-150EP2

PARTS GUIDE

CODE:00ZAR150E/P2E

DIGITAL COPIER

CONTENTS

AR-120E AR-150E
1 Exteriors 3 Operation panel 4 Side door unit 5 Optical frame Optical frame Delivery paper guide unit F Middle frame G Base plate unit 1 H Base plate unit 2 I Fusing unit J Drive unit K Single manual paper feeding cover unit
(except Pakistan,Philippines)
M Single manual paper feeding unit
(except Pakistan,Philippines,L2,L4)
N Multi manual paper feeding unit O Socket holder unit P TC case unit Q 250 sheets tray R Harness S Packing material & accessories T MCU PWB U Operation PWB Z DC power supply PWB [ DV cartridge unit
L Multi manual paper feeding cover unit
The AR-120E/AR-150E Parts Guide describes only the parts changed from AL-1000/AL-1200 Parts Guide. For then common parts, please refer to the AL-1000/AL-1200 Parts Guide.

SHARP CORPORATION

This document has been published to be used for after sales service only. The contents are subject to change without notice.

DEFINITION

The definition of each Rank is as follows and also noted in the list A : Parts necessary to be stocked as High usage parts. B : Parts necessary to be stocked as Standard usage parts. C : Low usage parts. D : Parts necessary for refurbish. E : Unit parts recommended to be stocked for efficient after sales service. Please note that the lead time for the said parts may be longer than normal parts. S : Consumable parts. Please note that the following parts used in Copier under the same description are classified into A or B Rank depending upon the place used. Example : Gear made of Metal, Sprocket, Bearing, Belt made of Rubber, Spring clutch mechanism. A Rank : The parts which may be with the revolution or loading. B Rank : Parts similar to A Rank parts, but are not included in Rank A. Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with the parts specific to the product specification.
F Other than this Parts Guide, please refer to documents Service Manual (including Circuit Diagram) of this model. F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order. F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.
} These parts are supplied by SMF.

6 Optical frame 2

FCP04165

12 Base plate unit 2

FCP04166

10 Middle frame

16 Multi manual paper feeding cover unit
18 Multi manual paper feeding unit

19 Socket holder unit

FCP04167

1 Exteriors

PARTS CODE
TLABH0167QSZZ TLABH0214QSZZ 20 T L A B Z Q S Z Z
PRICE NEW RANK MARK AF AG N AD
PART DESCRIPTION RANK C Operation instruction label (Except Russia,LAG2,LAG4,Pakistan,Philippnes) C Operation instruction label (Russian) C Class 1 label (Except Brazil,LAG2)

3 Operation panel

PFILZ0007QS13 PFILZ0007QS12 PFILZ0007QSZ8 CBTN-0004QS04 JBTN-0008QSZ1 CPNLC0002QS48 CPNLC0002QS49
PRICE NEW RANK MARK AS AS N AS N AG AG AV N AV N

PART RANK B B B C C D D

DESCRIPTION
Filter (Inch series)(LAG4,LAG2,L2,L4) Filter (Inch series)(Pakistan,Philippines) Filter (AB series) Operation key R Operation key L Operation panel (AR-150E) Operation panel (AR-120E)

4 Side door unit

MSPRD0076QSZ1 LFRM-0003QSZ1 NSFTZ0006QSZ1 CHLDZ0010QS52
PRICE NEW RANK MARK AD AP AG AU

PART RANK C C C E

Earth spring Side door inner frame PS shaft Transcription holder unit

5 Optical frame 1

NO. PARTS CODE
3 CREFL0003QS32 PRICE NEW RANK MARK BQ PART RANK E Copy lamp unit
RCORF0002QSZZ PGSK-1004DCZZ PSHEZ0074QSZZ PGSK-0001QSZZ PGSK-0006QSZZ PSHEZ0081QSZ1 PSHEZ0082QSZZ PSHEZ0072QSZZ PSHEZ0141QSZZ PGUMS0004QSZZ
PRICE NEW RANK MARK AE AF AE AG AE AD AB AE AC AA
PART RANK C C C C C C C C C C
Ferrite core Gasket Optical protection sheet Gasket (Except Saudi Arabia,Brazil,LAG2) Gasket (Except Saudi Arabia,Brazil,LAG2) Cabinet hook seet A Cabinet hook seet B Core holding mylar Core holding mylar Table glass cushion
9 Delivery paper guide unit
NROLP0008QSZZ 1 NROLP0046QSZZ PRICE NEW RANK MARK AD AC PART RANK C Delivery roller upper (Inch series) C Delivery roller upper (AB series)
7 NCPL-0006QSZZ 12 N F A N P Q S Z L F R M - Q S Z Z LPINS0009QSZZ 26 LPINS0008QSZZ 31 P M L T - Q S Z Z PRICE NEW RANK MARK AC AX AZ N AD AD AC PART RANK C B C C C C
Hopper cupling Fan Middle frame DV guide pin (Indonesia,Thailand,LAG3,Singapore,Malaysia,Hong Kong,Brazil,Philippines) DV guide pin (Other countries) Cushion

11 Base plate unit 1

MSPRC0161QSZZ PSHEZ2026FCZ1 LHLDZ0017QSZZ MSPRC0047QSZZ PCOVP0013QSZZ MSPRC0037QSZZ PSHEZ2174FCZZ
PRICE NEW RANK MARK AF N AB AD AA AD AB AB

PART RANK C C C C C C C

Clutch spring Sheet M1 (Pakistan,LAG2.L2,L4) Pressure plate holder (Pakistan,LAG2.L2,L4) Pressure plate spring (Pakistan,LAG2.L2,L4) Multi cover (Pakistan,LAG2.L2,L4) Transport lower roller spring (Pakistan,LAG2.L2,L4) Paper feeding sheet (Pakistan,LAG2.L2,L4)
4 CPWBF0013QS52 DHAI-0039QSZZ 6 DHAI-0064QSZ2 CPWBX0062TS5F 8 CPWBX0062QS5C CPWBX0062QS5D 9 LPLTM0017QSZ3 CPWBF0017QSCPWBF0017QSP S H E Z Q S Z Z 27 P M L T - Q S Z Z PRICE NEW RANK MARK BL BD AV AC N AC N AC N AQ BU BU AD AC PART RANK E C C E E E C E E C C
GDI memory PWB 6MB (AR-150E) Center frame harness (100V series) Center frame harness (200V series) MCU PWB (AR-150E L2,L4) MCU PWB (AR-120E) MCU PWB (AR-150E) PWB holder DC power supply PWB (120V/127V)(SaudiArabia,Brazil,LAG2) DC power supply PWB (200V series)(Other countries) Sheet (200V series) Core fixing cushion

13 Fusing unit

DHAI-0030QSZDHAI-0058QSZT C A U H F C Z P S H E Z Q S Z 1 PRICE NEW RANK MARK AN AL AF AC PART RANK C C C C
HL harness 2 (100V series) HL harness 2 (200V series) High temperature caution label PG earth sheet

14 Drive unit

20 C P L T M Q S RPLU-0016QSZZ 22 RPLU-0001QSZZ 26 P T M E - Q S Z 1 PRICE NEW RANK MARK AY AN AN AD PART RANK C B B B
Main drive plate PS solenoid (L2,L4) PS solenoid (Other countries) Roller pawl
15 Single manual paper feeding cover unit(except Pakistan,Philippines)
3 PCOVP0012QSZMSPRP0110QSZ1 PRICE NEW RANK MARK AK AD PART RANK C Single upper cover C Door switch spring
3 PCOVP0023QSZMSPRP0110QSZPSHEZ0075QSZZ PRICE NEW RANK MARK AK AD AC PART RANK C Multi upper cover C Door switch spring C MB upper guide sheet
17 Single manual paper feeding unit(except Pakistan,Philippines,L2,L4)
LBNDJ0013FCZ1 CPLTM0023QS02 MSPRC0039QSZ1 MSPRC0038QSZ1 MSPRC0109QSZZ
PRICE NEW RANK MARK AA AF AC AC AC

PART RANK C C C C C

Wire band PF plate 1 Earth spring Actuator spring Earth spring
25 C P L T M Q S 50 M S P R C Q S Z Z PRICE NEW RANK MARK AG AC PART RANK C Paper feed plate 1 C Spring
1 LHLDZ0009QSDZ 9 LBNDJ0013FCZ1 PRICE NEW RANK MARK AG AA PART RANK C HV interface holder C Wire band

20 TC case unit

3 PSHEP0019QSZL H L D Z Q S Z 1 (Unit) 901 C H L D Z Q S PRICE NEW RANK MARK AC AL AU PART RANK C TC sheet C TC holder E Transcription holder unit

sheets tray

PRICE NEW RANK MARK BD PART RANK E 250 Tray unit
(Unit) 901 C C A S P Q S 5 3

22 Harness

3 DHAI-0064QSZ2 PRICE NEW RANK MARK AV PART RANK C Center frame harness (200V series)
23 Packing material & accessories

! ! ! ! ! ! ! !

QACCD7618QCZZ QACCR7621QCZZ QACCB7521QCZZ QACCV6621QCN1 QACCJ9610QCZZ QACCF7620QCZZ QACCB7620QCZZ QACCB7622QCN1 TINSS0381TSZZ TINSE0378QSZZ TINSZ0379QSZZ TINSF0380QSZZ TINSE0382QSZZ TINSR0383QSZZ SSAKA2341QSZZ SPAKC0052TS6C SPAKC0052QS63 SPAKC0052QS64 TCAUH0007QSZZ TLABZ0106QSZZ TCAUS0009QSZZ QCNW-0122FCZZ QPLGA0002QCZZ QTANP0096FCZZ PHOG-1023CCZZ QPLGA4171CCZZ QPLGA0001QCZZ GCOVZ0149FCZZ

[R225,R227,R230,R241,R242, R243,R245,R250,R254,R256] [R269,R274,R275,R281,R293, R300,R341,R342] [R322,R325] [R320,R321] [R312,R298] [R280] [R255] [R213] [R235,R260,R263,R266,R267, R268,R270,R271] [R292,R305,R313,R317] [R209,R216,R296] [R204,R205,R208,R210,R307,R308] [R332] [R221] [R299] [R259] [R309] [R217,R236,R302] [R334] [R101] [R104,R105] [R102] [R249] [R219,R224,R318,R338] [R222] [R202,R203] [R212] [R211,R201] [Q201,Q203] [Q204] [Q202]
116 V R S - C Y 1 J D 3 J VRS-CY1JD203J VRS-CY1JD205J VRS-CY1JD242J VRS-CY1JD301J VRS-CY1JD331J VRS-CY1JD332J VRS-CY1JD333J VRS-CY1JD470J VRS-CY1JD470J VRS-CY1JD472J VRS-CY1JD473J VRS-CY1JD512J VRS-CY1JD621F VRS-CY1JD621J VRS-CY1JD680J VRS-CY1JD751J VRS-CY1JD752J VRS-CY1JD912J VRS-HT3DA102J VRS-HT3DA1R0J VRS-HT3DAR22J VRS-TP2BD121J VRS-TP2BD151J VRS-TP2BD221J VRS-TP2BD241J VRS-TP2BD432J VRS-TP2BD472J VS2SA1036KQRC VSDTA143XK/-1 VSDTC114EKA-1 (Unit) CPWBX0062TS5F 901 C P W B X Q S 5 D CPWBX0062QS5C

25 Operation PWB

4 QSW-P0005QSZZ VHP1LHEE-002A VHP1LHEE-002A 14 VHP1LHEE-002A VHP1LHEE-002A 15 V H P 1 L H L E - 2 A (Unit) CPWBF0014QSCPWBF0014QS52 AC AC AC AC AC AC BR BR B B B B B B E E

QSW-P0005QSZZ

PRICE NEW RANK MARK AC

PART RANK B

Tact switch (B3F-6102)(LAG4,LAG2,L2,L4) [CLK,PSW,1UPK,10UPK,ZUPK,ZDWK,MAGK,CRSK,EXUPK,EXDWK,EXMODK] Tact switch (B3F-6102)(Other countries) [CLK,PSW,1UPK,10UPK,ZUPK,ZDWK,MAGK,CRSK,EXUPK,EXDWK,EXMODK,BPK] LED(Green) (LAG4,LAG2,L2,L4) [RPL,ONLL,ZPL,1ENR,2ENR,NOR,1RE,2RE,3RE,] LED(Green) (LAG4,LAG2,L2,L4) [CS1L,EXD,EXN,EXL,AE,ME,PE,PML] LED(Green) (Other countries) [RPL,ONLL,ZPL,1ENR,2ENR,NOR,1RE,2RE,3RE,] LED(Green) (Other countries) [CS1L,EXD,EXN,EXL,AE,ME,PE,PML,BPL] LED(Red) [TPL,MPL,DPL,JPL] Operation PWB (LAG4,LAG2,L2,L4) Operation PWB (Other countries)

30 DC power supply PWB

PRICE NEW RANK MARK BU BU

PART RANK E E

DC power supply PWB (120V/127V)(Saudi Arabia,Brazil,LAG2) DC power supply PWB (200V series)(Other countries)
(Unit) CPWBF0017QSCPWBF0017QS37

31 DV cartridge unit

CBOX-0007JSCBOX-0007YS53 CBOX-0007YS51 CBOX-0002RSCBOX-0002QS53 PRICE NEW RANK MARK AX BL BL BF BF N PART RANK E E E E E

VRS-CY1JD102J " VRS-CY1JD103F VRS-CY1JD103J " VRS-CY1JD105F VRS-CY1JD122J VRS-CY1JD152J VRS-CY1JD202J VRS-CY1JD203J " VRS-CY1JD205J VRS-CY1JD242J VRS-CY1JD301J VRS-CY1JD331J VRS-CY1JD332J VRS-CY1JD333J VRS-CY1JD470J " VRS-CY1JD472J VRS-CY1JD473J VRS-CY1JD512J VRS-CY1JD621F VRS-CY1JD621J VRS-CY1JD680J VRS-CY1JD751J VRS-CY1JD752J VRS-CY1JD912J VRS-HT3DA102J VRS-HT3DA1R0J VRS-HT3DAR22J VRS-TP2BD121J VRS-TP2BD151J VRS-TP2BD221J VRS-TP2BD241J VRS-TP2BD432J VRS-TP2BD472J VS2SA1036KQRC VSDTA143XK/-1 VSDTC114EKA-1
24-107 24-108 24-109 24-110 24-111 24-112 24-113 24-114 24-115 24-116 24-117 24-118 24-119 24-120 24-121 24-122 24-123 24-124 24-125 24-126 24-127 24-128 24-129 24-130 24-131 24-132 24-133 24-134 24-135 24-136 24-137 24-138 24-139 24-140 24-141 24-142 24-143 24-144 24-145 24-146
AF AF } } } } } } AF AG AD AF AB AA AA AA AA AA AA AA AA AA AA AA AA AC AB AB AA AA AB AA AC AB AA AA AA AA AA AA AA AA AA AA AA AB AC AB AB AC AB AB AA AX AZ AZ AN AE AY BE AC AG AF AT AD AF AQ AF AF AH AG AG AE AC AC AF AA AA AA AA

N N N N N N N N

C C D D D D D D C C C C D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B B B B B B B B B B B B B B B B B B B B B B B B B B B C C C C
AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AB AA AA AA AB AB AC
C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B B

AR-150E

COPYRIGHT 1999 BY SHARP CORPORATION
All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
SHARP CORPORATION Digital Document Systems Group Quality & Reliability Control Center Yamatokoriyama, Nara 639-1186, Japan
1999 December Printed in Japan N