s Front panel

01. (CD) Disc Tray 02. (CD) Disc Skip Button 03. (CD) Disc Number Select Buttons 04. (CD) Open/Close Button 05. Extra Bass Indicator 06. Spectrum Analyzer/Volume Level Indicator 07. (CD) Disc Number Indicators 08. (CD/TUNER) Memory Indicator 09. (TAPE 2) Record Indicator 10. (CD) Play Indicator 11. (CD) Music Schedule Indicators 12. (CD) More Tracks Indicator 13. (CD) Pause Indicator 14. (TAPE) Play Indicator 15. (CD) Repeat Indicator 16. Dynamic PTY Indicator 17. Programme Type Indicator 18. Traffic Information Indicator 19. EON Indicator 20. Traffic Programme Indicator 21. Sleep Indicator 22. RDS Indicator 23. FM Stereo Mode Indicator 24. Traffic Announcement Indicator 25. FM Stereo Indicator 26. Timer Record Indicator 27. Timer Play Indicator 28. On/Stand-by Button 29. Clock Button 30. Timer/Sleep Button 31. Dimmer Button 32. Phantom Button 33. Normal Button 34. Bypass Button 35. (TUNER) Programme Type/Traffic Information

Search Button

36. (TUNER) EON Button 37. (TUNER) ASPM Button 38. (TUNER) Display Mode Selector Button 39. (TUNER) Station Selector Button 40. Volume Control 41. Extra Bass/Demo Mode Button 42. Equalizer Mode Selector Button 43. Headphone Socket 44. Function Selector Buttons 45. Tuning and Time Up/Down Buttons 46. (CD) Track Down/Review Button
(TUNER) Preset Down Button (TAPE 2) Rewind Button 47. Memory/Set Button 48. (CD/TAPE) Stop Button 49. Timer Set Indicator 50. (CD) Play/Repeat Button (TAPE) Play Button 51. (TAPE 2) Record Pause Button 52. (CD) Track Up/Cue Button (TUNER) Preset Up Button (TAPE 2) Fast Forward Button
53. (TAPE 1) Cassette Compartment 54. (TAPE 2) Cassette Compartment 4

s Rear panel

01. AC Power Lead 02. CD Digital Output Socket 03. FM 75 Ohms Aerial Socket 04. AM Loop Aerial Socket 05. Video/Auxiliary (Audio Signal) Input Sockets 06. Front Speaker Terminals 07. Center Speaker Terminals 08. Surround Speaker Terminals

s Front speaker

11. Super Tweeter 12. Tweeter 13. Woofer 14. Bass Reflex Ducts 15. Speaker Wire

s Centre speaker

11. Full-Range Speaker 12. Speaker Wire

s Surround speaker

s Remote control
01. Remote Control Transmitter LED 02. Surround Level Buttons 03. Centre Level Buttons 04. Dolby Pro Logic Button 05. Test Tone Button 06. Balance Control Buttons

q Tuner control section

07. Preset Up/Down Buttons

q CD control section

08. Memory Button 09. Pause Button 10. Stop Button 11. Play/Repeat Button 12. Clear Button 13. Track Down/Review Button 14. Random Button 15. Track Up/Cue Button 16. Disc Skip Button

q Tape control section

17. (TAPE 1) Play Button 18. (TAPE 1/2) Stop Button 19. (TAPE 2) Record Pause Button 20. (TAPE 2) Rewind Button 21. (TAPE 2) Play Button 22. (TAPE 2) Fast Forward Button

q Common section

23. Equalizer Mode Button 24. Function Selector Buttons 25. On/Stand-by Button 26. Extra Bass Button 27. Volume Up/Down Buttons

PREPARATION FOR USE

q Unplug the AC power lead from the AC socket before connecting or disconnecting any component.

s Speaker connection

Black Red White line Connect the speaker wires to the SPEAKER terminals as shown.

Front speakers

q Connect the black wire to the minus () terminal, and the red wire to the plus (+) terminal.
Centre speaker and surround speakers
q Connect the wire with the white line to the minus () terminal and the plain wire to the plus (+) terminal. Caution: q Do not mix the right channel and left channel wiring when connecting the speakers to the unit. q Do not let bare speaker wires touch each other as this may damage the amplifier and/or speakers. q Do not allow any objects to fall into or to be placed in the bass reflex ducts. q Do not stand or sit on the speakers. If the speakers fall or collapse, you may be injured. q When you use speakers other than the speakers included with this unit, if their impedance is lower than that specified for each speaker type, the unit may be damaged. Front speakers: 6 ohms Centre speaker: 6 ohms Surround speakers: 12 ohms

Front speaker (Right)

Front speaker (Left)

Centre speaker

Surround Surround speaker speaker (Right) (Left)

Placing the speakers

To enjoy the surround effect, add the extra speakers in addition to the front speakers. Position them as shown in the illustration.
Centre speaker TV Main unit

TV monitor location:

Place the centre speaker near the T.V. The close proximity of this speaker will not adversely affect the monitor as the speaker is shielded. q Depending on the particular location of a TV monitor, colour variations may appear on the TV monitor screen. If this occurs, move the systems speakers away from the TV monitor and turn it off. After 15 - 30 minutes, turn on the TV monitor again. The TV monitors own demagnetising function should eliminate the variations. If the colour variations still appear, move the system further away from the TV monitor. q If any kind of magnet or an electromagnet is placed too close to the TV monitor and the system, irregular colours may appear on the TV monitor screen.

Surround speaker (Left)

Surround speaker (Right)
Example: When installed on the wall Surround speaker Wall 60 - 90 cm (23" - 35")

q Surround speakers

The surround speakers should be installed on the wall. lnstall them 60 - 90 cm (23" - 35") above the height of your ears when seated, if possible. When the surround speakers are installed vertically, the speaker badge will be upside down. In this case, you can adjust the badge to face the proper direction. Just turn it by hand. Badge
Example: When installed vertically

32 mm (1-1/4")

s To mount the surround speakers on the wall
The design of the surround speakers allows them to be hung on the wall. Be sure to use the type and size of screw that is shown to the left.
8-9 mm (3/8") 3.2 mm (1/8") 5 mm (3/16") Min. 22 mm (7/8") 9 mm (3/8")
1 Make a hole in the wall using a drill. 2 Drive a wall mount plug into the hole using a hammer. Drive
the wall mount plug in until it is flush with the wall surface.
3 Drive one screw into the wall mount plug for each speaker
as shown in the illustration. q Drive the screws, so there is about a 5 mm (3/16") space between the wall and the head of the screw.
4 Mount the surround speaker on the wall so that the screw
head is inserted into the slot on the surround speaker.

Wall surface

Wall mounting screw

(Front speaker only)

s Removing the speaker grilles
1 Remove the lower part of the speaker grille first. 2 Remove the upper part of the speaker grille.
q The speaker grilles on the centre and surround speakers are not removable.
Caution: When the speaker grilles are removed, the speaker diaphragms are exposed. Make sure nothing comes into contact with the speaker diaphragms.
s Mounting the speaker grilles
Fit the four posts on the speaker grille into the mounting holes and push them lightly with the palm of your hand to secure.

s Aerial connection

Supplied FM aerial
Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.

Supplied AM loop aerial

FM aerial AM loop aerial Connect the AM loop aerial wire to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied). Notes: q Do not place the aerial on the main unit as it may result in noise pickup from the internal digital electronics. Place the aerial away from the unit for better reception. q If the AM loop aerial and the FM aerial wire are placed near the AC power lead, interference may result.

External FM aerial

External FM aerial Use an external FM aerial if you require better reception. Consult your dealer.
s Connecting the AC power lead
q After connecting the speakers, plug the AC power lead into a convenient AC socket. q Unplug the AC power lead from the AC socket if the unit will not be in used for a prolonged period of time.

AC 230-240 V, 50 Hz

To an AC socket

s Demo mode

(Main unit operation) When the AC power lead is first connected, the unit will enter the demonstration mode.
To cancel the demonstration mode:
When the unit is in the stand-by mode (demonstration mode), press the X-BASS/DEMO button. q The demonstration mode will be cancelled and the unit will be in the low power consumption mode.
To return to the demonstration mode:
When the unit is in the stand-by mode, press the X-BASS/DEMO button again. Notes: q When the unit is in the low power consumption mode, the display will disappear. q When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode.
s To change the brightness of the display
(Main unit operation) Press the DIMMER button. q The display will be made dimmer.
To return to the original brightness:
Press the DIMMER button again.

When bright

When dark
q When inserting or removing the batteries, push them towards the battery terminals. q Installing the batteries incorrectly may cause the unit to malfunction.
Precautions for battery use:

COMPACT DISC OPERATION

s CD playback

12 cm (5")

8 cm (3")
1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the OPEN/CLOSE button to open the disc tray. 4 Place the CD(s) on the disc tray, label side up.
Caution: Do not stack CDs in the tray. This can damage the player and the CDs.
q CDs can be placed on any open position on the disc tray. q Be sure to place 8 cm (3") CD(s) in the middle of the disc trays.
5 When loading a third disc, press the DISC SKIP button to
turn the disc tray, then place the CD in the open position.
6 Press the OPEN/CLOSE button to close the disc tray.
q The total number of tracks and the total playing time for one disc will be displayed. At this time, the disc number indicator is flashing. q The music schedule will be displayed only for the number of tracks on the disc. q If the CD contains more than 15 tracks, C will appear.
7 Press the desired disc number button (DISC-1 DISC-3). 8 Press the 0/R ( 0R ) button.
q Playback will begin from track 1 on the disc you have selected to play. q After the disc finishes playing, the next disc will automatically play. q When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played. q When the last track on the third disc has finished playing, the unit will stop automatically.

To interrupt playback:

1 Press the CD 6 button on the remote control. q 6 will appear. 2 Press the 0R button to resume playback from the same point. Music schedule More tracks indicator

To stop playback:

Press the s (CD s) button.

To remove the CDs:

Whilst in the stop mode, press the OPEN/CLOSE button. q The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc.

After use:

Total number of tracks Total playing time Press the ON/STAND-BY button to enter the stand-by mode.

s Cue and review

1 Load a disc and begin playback. 2 Hold down the 2 ( ) button for audible fast forward, and hold down the 3 ( ) button for audible fast reverse.
3 Normal playback will resume when the 2 ( ) or
3 ( ) button is released. Notes: q When the end of the disc is reached whilst cueing, END will appear in the display and CD operation will be paused. (Even though the next disc has been loaded, the disc will not be switched.) Press the 3 ( ) button for fast reverse or press the s (CD s) button to stop CD operation. q If the beginning of the disc is reached whilst reviewing, the mode will automatically switch to normal playback at that point.

s Random play

The tracks on the disc(s) can be played in random order automatically.
1 Load a disc(s) and close the disc tray. 2 Press the RANDOM button to begin random play.

q R will appear.

s Disc number selection
1 When stopped, press the DISC SKIP button. 2 Press the 0/R ( 0R ) button.
q The next disc playback will begin, after which each following disc will be played sequentially. Notes: q When the DISC SKIP button is pressed during playback, playback will begin automatically from the next disc. (It is not necessary to press the 0/R ( 0R ) button.) q When one of the disc number buttons (DISC-1 DISC-3) is pressed during playback, playback of the selected disc will begin automatically. (It is not necessary to press the 0/R ( 0R ) button.)
Notes: q If you press the 4 ( ) button during random play, you can move to the next track. On the other hand, the 5 ( ) button does not allow you to move to the previous track. The beginning of the track being played will be located. q When using random play, be sure to press the s (CD s) button after you are through listening. Otherwise, the disc(s) will play continuously. q In random play the unit will select and play tracks automatically. (You cannot select the order of the tracks.)

To cancel random play:

Press the 0/R ( 0R ) button. q R will go out. Caution: q Do not carry the unit with discs left in the disc trays. The discs may come loose inside the unit and they may be damaged or cause damage to the unit. This may also cause malfunctions. q Do not place two CDs in one disc position. q Do not push the disc tray whilst it is moving. q Do not attempt to turn the disc tray by hand. This may cause malfunctions. q If the power fails whilst the tray is open, wait until the power is restored. q If the disc tray is stopped forcibly, ERR will appear in the display and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the stand-by mode and then turn the power on again. q If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. q If a disc is damaged, dirty, or loaded upside down, the disc will be skipped and the next disc will automatically play.

s Repeat play

All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 3 discs:
Press the 0/R ( 0R ) button twice. q R will appear.
To repeat a programmed sequence:

Repeat indicator

1 Programme a sequence of up to 32 tracks. 2 Press the 0/R ( 0R ) button twice.

To cancel repeat play:

Press the 0/R ( 0R ) button again. q R will go out. Note: q When using repeat play, be sure to press the s (CD s) button after you are through listening. Otherwise, the CD(s) will play continuously.

RADIO OPERATION

s Tuning
1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the desired frequency band. (FM ST, FM or AM)
4 Press the TUNING/TIME (X or W) button to tune into the

desired station.

Manual tuning:
Press the TUNING/TIME (X or W) button as many times as required to adjust the frequency shown on the display to the frequency of the desired station.

Auto tuning:

When the TUNING/TIME (X or W) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Notes: q When radio interference occurs during auto scan tuning, auto scan tuning may stop automatically at that point. q If a weak station signal is found during auto scan tuning, the station will be skipped. q To stop the auto tuning, press the TUNING/TIME (X or W) button again. q When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light, Finally, the station name will appear.
5 To receive an FM stereo transmission, press the TUNER
(BAND) button so that the ST indicator on the display lights up. q j will appear when an FM broadcast is in stereo.
6 If the FM reception is weak, press the TUNER (BAND) button so that the ST indicator goes out. q Although the reception changes to monaural, the sound becomes clearer.
Press the ON/STAND-BY button to enter the stand-by mode. Note: q The last station tuned in will be recalled, even after changing the tuning band or the function, or after switching the unit to the stand-by mode.

s Preset tuning

You can store up to 40 stations in memory (40 stations consisting of any combination of FM and AM stations you like) and recall them at the push of a button.
To enter stations into memory:
1 Perform steps 1 - 6 in the Tuning section. 2 Press the MEMORY/SET button.
q MEMORY and the preset channel number will flash. make the preset channel number flash in the display. q Store the stations in memory, in order, starting with preset channel 1.

s Information Provided by RDS
With the CD-DP2500H, you can display three types of RDS service. To show them in the display, press the DISPLAY MODE button. Each time you press the DISPLAY MODE button, the display will change to show the following information.
PS (Programme Service): Station names commonly known will be displayed. NO PS appears if no signal is being received. PTY (Programme Type): Programme type will be displayed. NO PTY appears if no signal is being received. Radio text will be displayed. RT (Radio Text): NO RT appears if no signal is being received. Station frequencies. Station Frequency:
Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and TA (Traffic Announcement) With the CD-DP2500H, you can search for and receive the following PTY, TP and TA signals.

NEWS: AFFAIRS:

Short accounts of facts, events and publicly expressed views, reportage and actuality. Topical programme expanding or enlarging upon the news, generally in different presentation style or concept, including debate, or analysis. Programmes whose purpose is to impart advice in the widest sense. Programme concerned with any aspect of sport. Programme intended primarily to educate, of which the formal element is fundamental. All radio plays and serials. Programmes concerned with any aspect of national or regional culture, including language, theatre, etc. Programmes about the natural sciences and technology. Used for mainly speech-based programmes usually of light-entertainment nature, not covered by other categories. Examples include: quizzes, panel games, personality interviews. Commercial music, which would generally be considered to be of current popular appeal, often featuring in current or recent record sales charts. Contemporary modern music, usually written and performed by young musicians. Cur rent contemporary music considered to be easy-listening, as opposed to Pop, Rock or Classical, or one of the specialized music styles, Jazz, Folk or Country. Music in this category is often but not always, vocal, and usually of short duration. Classical Musical for general, rather than specialist appreciation. Examples of music in this category are instrumental music, and vocal or choral works. phonies, chamber music etc., and including Grand Opera.

FINANCE:

Stock Market reports, commerce, trading etc. primarily for entertainment and interest, rather than where the objective is to educate.
CHILDREN: For programmes targeted at a young audience,

SOCIAL:

INFO: SPORT: EDUCATE: DRAMA: CULTURE:
Programmes about people and things that influence them individually or in groups. Includes: sociology, history, geography, psychology and society. Any aspect of beliefs and faiths, involving a God or Gods, the nature of existence and ethics. Involving members of the public expressing their views either by phone or at a public forum. Features and programmes concerned with travel to near and far destinations, package tours and travel ideas and opportunities. Not for use for Announcements about problems, delays, or roadworks affecting immediate travel where TP/TA should be used. Programmes concerned with recreational activities in which the listener might participate. Examples include, Gardening, Fishing. Antique collecting, Cooking, Food & Wine etc. Polyphonic, syncopated music characterised by improvisation. Songs which originate from, or continue the musical tradition of the American Southern States. Characterised by a straightforward melody and narrative story line. Current Popular Music of the Nation or Region in that countrys language, as opposed to International Pop which is usually US or UK inspired and in English. Music from the so-called golden age of popular music. Music which has its roots in the musical culture of a particular nation, usually played on acoustic instruments. The narrative or story may be based on historical events or people. presented in an investigative style.

RELIGION: PHONE IN: TRAVEL:

SCIENCE: VARIED:

LEISURE:

JAZZ: COUNTRY:

POP M:

ROCK M: EASY M:

NATION M:

OLDIES: FOLK M:

LIGHT M:
CLASSICS: Performances of major orchestral works, sym-
DOCUMENT: Programme concerned with factual matters, TEST: ALARM !:
Broadcast when testing emergency broadcast equipment or receivers. Emergency announcement made under exceptional circumstances to give warning of events causing danger of a general nature. No programme type (receive only). Broadcasts which carry traffic announcements. Traffic announcements are being broadcast at present.

OTHER M:

Musical styles not fitting into any of the other categories. Particularly used for specialist music of which Rhythm & Blues and Reggae are examples. logical information.
WEATHER: Weather reports and forecasts and Meteoro-

NONE: TP: TA:

Note: q When the unit is in the EON stand-by mode and a programme is selected, the unit will display TI instead of TA.
s ASPM (Auto Station Program Memory)
It is recommended that you store stations in memory using ASPM. (This memory can be used for PTY searches, station select and EON switching.) When the ASPM button is pressed, whilst tuned to the FM band, the RDS (Radio Data System) function will automatically search for new RDS stations. Up to 40 stations can be stored in memory. (If you have already stored some stations in memory, the number of new stations you can store will be less.)
1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the FM ST or FM
4 Press and hold down the ASPM button for at least 3 seconds. 1 After ASPM has flashed for about 4 seconds, scanning will start. (87.50 - 108.00 MHz) 2 When an RDS station is found, the RDS will appear for a short time and the station will be stored in memory. 3 After scanning, the number of stations that have been automatically stored in memory will be displayed for 4 seconds, and then END will appear for 4 seconds. Notes: q Only RDS stations will be stored in memory in numerical order. q If the same station is broadcasting on different frequencies, the transmission with the strongest broadcast frequency will be stored in memory. q Any station which has the same frequency as one which has been already stored in memory will not be stored again. q The ASPM operation can be repeated until END appears. q If a 40th station is stored in memory during a scan, the scanning will stop at that station. The number of stations and END will each be displayed for 4 seconds. q If no stations have been stored in memory, END will appear for about 4 seconds. q If 40 stations have already been stored in memory and the ASPM button is pressed, END will appear immediately and the scan will be aborted. If you want to redo the ASPM operation from the beginning, erase the preset memory, and then perform steps 1 - 4. q If the RDS station broadcast signals are very weak, station names may not be stored in memory.

(4 seconds)

To stop the ASPM operation before it is complete:
Press the ASPM button whilst it is scanning for stations. q The stations that have already been stored in memory will be kept there.
s To specify station names and select stations manually (station select)
You can receive a desired station by specifying the station name (BBC R1, BBC R2, etc.) from among the stations that have been stored in memory. (ASPM is convenient for storing stations in memory.) Before starting this operation, you must store one or more station names in memory.
4 Press the STATION button.
q STATION and SELECT will appear alternately for about 6 seconds.
5 Within 6 seconds, press the PRESET (X or W) button to
select a desired station name you want. q Each time the button is pressed, the station name will appear. If the button is held down for more than 0.5 seconds, the station name will continuously change.
6 Whilst the selected station name is flashing (within 6 seconds), press the STATION button again. q After the selected station name has been lit for 1 second, the preset station which corresponds to the selected station name will be recalled.
To cancel the station select operation:
Press the STATION button whilst STATION and SELECT appear alternately.
To try to store a station name again, if the wrong name was stored in memory by mistake:
When you store station names in memory using the ASPM function, the correct station names may not actually be stored if there is lots of noise or if the RDS station signal is too weak. In this case, try storing station names in memory using the following procedure.
1 Press the STATION button. 2 Within 6 seconds, press the PRESET (X or W) button to
Notes: q When there are no station names stored in memory, you cannot use this function. In this case, when the STATION button is pressed, NOTHING will flash for 5 seconds, and the unit will return to the original display. q This function can only be used when the FM band has been selected. q The same station name can be stored in different preset channels. Therefore, when you are choosing a station name from the presets, the same station name may be encountered more than once. q In a certain area or during certain time periods, the station names selected using the station select function may temporarily be different from the name of the station you are actually receiving. check whether the station names are correct.

s Notes for Radio text

q The radio text for 8 characters will be displayed steadily for 4 seconds and then it will scroll across the display. q If you tune into a station which is not broadcasting any radio text, even if it is an RDS station, when you switch to the radio text position NO RT will be displayed. q Whilst radio text data is being received or when the text contents change, RT will be displayed.
s Notes for RDS operation
If any of the following events occur, it does not mean that the unit is faulty. q PS, NO PS and a station name appear alternately, and the unit does not operate properly. q If a particular station is not broadcasting properly or a station is conducting tests, the RDS reception function may not work properly. q When you receive an RDS station whose signal is too weak, information like the station name may not be displayed, even if RDS is lit.

s EON-PTY

1 Tune in the desired RDS station (when a station name is

being displayed).

2 Press the EON button when EON appears.
3 Whilst they are being displayed, select the desired
programme type using the PRESET (X or W) button. q The selected programme type will flash.
4 Within 4 seconds, press the PTY.TI SEARCH button.
q The selected programme type and WAITING will be displayed for 2 seconds each. q PTY will appear, and the unit will enter the EON-PTY stand-by mode.
5 When a programme of the type specified starts on an ON
(other network) station, the unit will automatically switch to the station broadcasting the selected programme type, and PTY will flash.
6 When the programme specified for the ON station is over,
the unit will automatically return to the original station you were tuned to. Note: q If the EON button is pressed when EON is not displayed, NO EON will appear for 5 seconds to indicate that the unit cannot enter the EON stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. (Programme type WAITING)
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4 seconds, press it again. The EON stand-by mode will be cancelled. q PTY will go out.
About the PTYI (Dynamic PTY Indicator):
PTYI (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is being received. Dynamic PTY indicates that the PTY for the station tuned in, or the PTY referenced in the EON data, is assessed whenever the programme changes and may be changed. PTYI Lights up Goes out Meaning Tuned into a dynamic PTY station. Tuned into a static PTY.

Note: q When PTYI appears, if you press the DISPLAY MODE button to display the programme type, you can check the type of programme you are actually receiving.

s EON-TI

3 Whilst they are being displayed, select the TI (Traffic Information) using the PRESET (X or W) button. q The selected TI will flash.
q TI and WAITING will appear for 2 seconds each. q TI will appear, and the unit will enter the EON-TI standby mode.
5 When a TA specifed starts on an ON (other network) station, the unit will automatically switch to that station, and TI will flash.
6 When the traffic announcement is over, the unit will automatically return to the original station you were tuned to. Note: q If the EON button is pressed when EON is not displayed, NO EON will appear for 5 seconds to indicate that the unit cannot enter the EON stand-by mode.
When in the EON stand-by mode, press the EON button. (TI WAITING)
When in the EON stand-by mode, press the EON button. Within 4 seconds, press it again. The EON stand-by mode will be cancelled. q TI will go out. Note: q If neither TP nor TA appear, then even if EON appears the unit cannot enter the EON-TI stand-by mode. In this condition, if the PTY.TI SEARCH button is pressed after TI is selected, NO TI will flash for 4 seconds.
About the TP and TA indicators
TP indicator Not lit Not lit Lit TA indicator Not lit Lit Not lit Meaning This programme does not carry traffic announcements nor does it refer, via EON, to a programme that does. This programme carries EON information about another programme which gives traffic information. This programme carries traffic announcements but none are being broadcast at present and may also carry EON information about other traffic announcements. A traffic announcement is being broadcast on this programme at present.
In the following cases, the EON stand-by mode will be cancelled. q When the unit is set in the stand-by mode q When the unit is switched to another band in the EON standby mode q When you change the FM station whilst in the EON standby mode q When a preset call is made Notes: q During the same programme as the specified PTY (or TA) is being broadcast on the station you are receiving, the unit will not switch to other network station. q If there are more than two other network stations you want to listen to, compare the strength of each stations signal and tune in the station with the strongest signal. (EON-AF) However, if the frequency of other network station has been stored in the preset channel memory, the unit will switch to that preset channel. q If you want to cancel the reception of an ON (other network) station which was tuned in by the EON system and return to the original station you were receiving, press the EON button. q After the unit returns to the original station, the stand-by mode will still be active. (The TI or PTY will remain lit.) q The unit will not switch from the ON station to another network station. The unit returns to the original station. q When the unit switches automatically to other network station, if there is any problem with this station or the station cannot be received properly WEAK SIG will appear and the unit will return to the original station. q Even if the unit switches from the station you are listening to directly to some other network station, if the signals from the other network stations are very weak, the unit will search for the station with the strongest signal and switch to it. However, if the signals from all the other network stations are very weak, or if the tuning conditions are very bad (due to electrical noise), the unit will stop searching, WEAK SIG will be displayed, and the unit will return to the original station you were receiving.

mode after the playback. If you select TUNER or VIDEO/ AUX, it will enter the stand-by mode one hour after the timer playback starts. Note: q When performing timer playback using an external unit connected to the VIDEO/AUX (1 or 2) socket, only the power of the main unit will be turned off automatically. (The power of the external unit will not be turned off.)

s Timer recording

1 Press the ON/STAND-BY button to turn the power on.
q Load a cassette for recording into the TAPE 2 cassette compartment. select the desired function, and then adjust the sound volume using the VOLUME control.
2 Press the TUNER (BAND) or VIDEO/AUX (1 V 2) button to 3 Press the TIMER/SLEEP button repeatedly until f REC
) button to set the minute start time, then press the MEMORY/SET button. q The unit will enter the stand-by mode automatically, then the timer set indicator will light up and finally f REC will disappear. start. q The volume will increase gradually.
6 When the preset time is reached, the timer recording will 7 When the recording tape reaches its end, the timer recording will end, and the unit will enter the stand-by mode.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power on.
To change the programmed contents:
Start again from step 1. Note: q Once the time is set, the setting will be retained until a new time is entered.

s Sleep operation

The radio, compact disc and cassette deck can all be turned off automatically.
1 Play back the desired sound source. 2 Press the TIMER/SLEEP button repeatedly until SLEEP

is displayed.

To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME (X or W) button to adjust the time. (Maximum: 3 hours - Minimum: 1 minute) The amount of sleep time can also be changed during the sleep operation. q 3 hours - 5 minutes 5-minute intervals q 5 minutes - 1 minute 1-minute intervals
3 Press the MEMORY/SET button. 4 The unit will enter the stand-by mode automatically after
the preset sleep time has elapsed. Note: q Once the sleep time is set, it will remain the same duration until the setting is changed.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button.