CHANGE SIGN KEY: Changes the algebraic sign of a number (i.e., positive to negative or negative to positive). RECALL AND CLEAR MEMORY KEY RECALL MEMORY KEY
TECLA DE CAMBIO DE SIGNO: Cambia el signo algebraico de un nmero (es decir, de positivo a negativo o de negativo a positivo). TECLA DE TOTAL Y BORRADO DE MEMORIA TECLA DE TOTAL PARCIAL EN MEMORIA TECLA DE INCLUSIN DE IMPUESTOS TECLA DE ANTES DE IMPUESTOS TECLA DE TOTAL GLOBAL TECLA DE INTRODUCCIN DEL PRECIO DE COSTE: Pulse esta tecla para introducir el precio de coste. TECLA DE INTRODUCCIN DEL PRECIO DE VENTA: Pulse esta tecla para introducir el precio de venta. TECLA DE INTRODUCCIN DEL MARGEN: Pulse esta tecla para introducir el margen. SMBOLOS DE LA EXHIBICIN: M E : Aparece cuando un nmero se almacena en la memoria. : Aparece cuando el nmero es negativo. : Aparece cuando un nmero est en la memoria de total global. : Aparece cuando se detecta un error o se supera la capacidad.
ELECTRONIC PRINTING CALCULATOR CALCULADORA IMPRESORA ELECTRNICA

EL-1801P

TAX-INCLUDING KEY PRE-TAX KEY GRAND TOTAL KEY
OPERATION MANUAL MANUAL DE MANEJO
COST PRICE ENTRY KEY: Press this key to enter the cost price. SELLING PRICE ENTRY KEY: Press this key to enter the selling price. MARGIN ENTRY KEY: Press this key to enter the margin.
WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
DISPLAY SYMBOLS: M E : Appears when a number is in the memory. : Appears when a number is negative. : Appears when a number is in the grand total memory. : Appears when an overflow or other error is detected.

SHARP CORPORATION

OPERATIONAL NOTES
To insure trouble-free operation of your SHARP calculator, we recommend the following: 1. The calculator should be kept in areas free from extreme temperature changes, moisture, and dust. 2. A soft, dry cloth should be used to clean the calculator. Do not use solvents or a wet cloth. 3. Since this product is not waterproof, do not use it or store it where fluids, for example water, can splash onto it. Raindrops, water spray, juice, coffee, steam, perspiration, etc. will also cause malfunction. 4. If service should be required, use only a SHARP servicing dealer, a SHARP approved service facility or SHARP repair service. 5. If you pull out the power cord to cut electricity completely, the presently stored tax rate will be cleared. 6. Do not wind the AC cord around the body or otherwise forcibly bend or twist it.
PRINTED IN CHINA / IMPRESO EN CHINA 02KT(TINSZ0584EHZZ)

INK ROLLER REPLACEMENT

If printing is blurry even when the ink roller is in the proper position, replace the roller. Ink roller: Type EA-772R WARNING APPLYING INK TO WORN INK ROLLER OR USE OF UNAPPROVED INK ROLLER MAY CAUSE SERIOUS DAMAGE TO PRINTER. 1) Set the power switch to OFF. 2) Remove the printer cover. (Fig. 1) 3) Hold the top of the ink roller and remove the roller by pulling it toward you and then upward. (Fig. 2) 4) Install the new ink roller in the correct position. Make sure that the roller is securely in place. (Fig. 3) 5) Put back the printer cover.
CAMBIO DEL RODILLO ENTINTADOR
Si la impresin queda borrosa aunque est bien colocado el rodillo entintador, reemplace el rodillo. Rodillo entintador: Tipo EA-772R ADVERTENCIA ECHANDO TINTA EN UN RODILLO ENTINTADOR ROTO O USANDO UN RODILLO ENTINTADOR NO AUTORIZADO P U E D E C A U S A R D E T E R I O R O S G R AV E S E N L A IMPRESORA. 1) Poner el interruptor de corriente en OFF. 2) Sacar la tapa de la impresora. (Fig. 1) 3) Sujete la parte superior del rodillo entintador y extraiga el rodillo tirando de l hacia usted y hacia arriba. (Fig. 2) 4) Instalar el nuevo rodillo entintador en la posicin correcta. Cerciorarse de que el rodillo est firmemente colocado en su sitio. (Fig. 3) 5) Poner de nuevo en su lugar la tapa de la impresora.

MEMORY / MEMORIA

= +) = ) = Total *78 46. 3,588.M 46. 78. = 3, 588. +M
COST / SELL / MARGIN CALCULATION CLCULO DE COSTES / VENTAS / MARGENES
EXAMPLE 1: Determine the cost price for 30% margin when the selling price is set at $500. Selling Price Margin Cost price EJEMPLO 1: Determine el precio de coste para un margen del 30% cuando el precio de venta es de 500 pesetas. precio de venta margen precio de coste

500 30

500. 30. 350.
500. 30. % 350. C are also valid. 500 tambin son

125.M 25.M

125. 5. = 25. +M 72. 8. = 576. M 3, 037. M

72.M 576.M

: Entries in the order of : Las entradas en el orden de 30 vlidas.

WARNING

THE VOLTAGE USED MUST BE THE SAME AS SPECIFIED ON THIS CALCULATOR. USING THIS CALCULATOR WITH A HIGHER VOLTAGE THAN THAT WHICH IS SPECIFIED IS DANGEROUS AND MAY RESULT IN A FIRE OR OTHER TYPE OF ACCIDENT CAUSING DAMAGE. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE RESULTING FROM USE OF THIS CALCULATOR WITH A VOLTAGE OTHER THAN THAT WHICH IS SPECIFIED.
EL VOLTAJE UTILIZADO DEBE SER EL ESPECIFICADO EN ESTA CALCULADORA. ES PELIGROSO USAR ESTA CALCULADORA CON UN VOLTAJE SUPERIOR AL ESPECIFICADO YA QUE PODRA PRENDERSE FUEGO O PRODUCIRSE OTRO TIPO DE ACCIDENTES CON DAOS PERSONALES. NO NOS HACEMOS RESPONSABLES DE CUALQUIER DAO QUE PUEDA OCASIONARSE AL UTILIZAR ESTA CALCULADORA CON UN VOLTAJE SUPERIOR AL ESPECIFICADO. 3,037.M
EXAMPLE 2: Determine the selling price for 30% margin when the cost price is set at $350. Cost price Margin Selling Price EJEMPLO 2: Determine el precio de venta para un margen del 30% cuando el precio de coste es de 350 pesetas. precio de coste margen precio de venta
*2 : Press to clear the memory before starting a memory calculation. para cancelar la memoria antes de empezar a *2 : Apretar efectuar un clculo con memoria.

350 30

350. 30. 500.
350. C 30. % 500. are also valid. 350 tambin son
TAX RATE CALCULATIONS / CLCULOS CON EL TIPO DE IMPUESTO

CALCULATION EXAMPLES

1. Set the decimal selector as specified in each example. The rounding selector should be in the 5/4 position unless otherwise specified. 2. The grand total/rate set mode selector should be in the position (off) unless otherwise specified. 3. The print / item count mode selector should be in the P position unless otherwise specified. 4. Press prior to beginning any calculation. 5. If an error is made while entering a number, press or and enter the correct number. 6. After entering a value, press , or to activate the Cost/Sell/Margin Calculation mode. In case of performing different calculation tasks, key must be pressed first to cancel the Cost/Sell/Margin mode. 7. Example procedures are listed in following manner unless otherwise specified.

PERCENT / PORCENTAJES

A. 100 25% = 100. 25.00 100. 25. % 25.00
B. = (%) 123. 8.99 123. 1,368. % 8.99
Caution! The socket outlet shall be installed near the equipment and shall be easily accessible. Aviso! El tomacorriente debe estar instalado cerca del equipo y debe quedar bien accesible.

LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the Product), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Your Product : Warranty Period for this Product : Electronic Calculator Six (6) months parts and labor from date of purchase.

ITEM COUNT CALCULATION CLCULO DE CUENTA DE ARTCULOS
Bill No. N de factura 5 Total Number of bills Cantidad de facturas 1 (a) Amount Importe $100.55 $200.00 $200.00 $400.55 $500.65 (b)
GRAND TOTAL / TOTAL GLOBAL
100 + 200 + 300 = +) 300 + 400 + 500 = Grand total / Total global

www.sharpusa.com

For your convenience, Genuine Sharp Supplies. Accessories, and additional Sharp Products can be purchased from the Authorized Sharp Reseller where you purchased your product or on-line at:
100. 300. 600. 600. 300. 700. 1,200. 1,200. 1,800.
100. 200. 300. 600. 300. 400. 500. 1,200.

+ + + + + + + +

www.sharpplace.com
Additional Items Excluded Any consumable items such as paper, maintenance cartridge, ink from Warranty Coverage : cartridges supplied with the Product or to any equipment or any hardware, software, firmware, fluorescent lamp, power cords, covers, rubber parts, or peripherals other than the Product. Where to Obtain Service : At a Sharp Authorized Servicer located in the United States. To find out the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP. What to do to Obtain Service : Ship (prepaid) or carry in your Product to a Sharp Authorized Servicer. Be sure to have proof of purchase available. If you ship or mail the Product, be sure it is packaged carefully. TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.

100.400.55 500.65

100.55 300.55 500.55 901.10 1,401.75 1,401.75
100.55 + 200.00 + 200.00 + 400.55 + 500.65 + 005. 1,401.75

1,800.

(a) (b)

EL-1801P(U1U)-2

WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

SHARP CORPORATION

PRINTED IN CHINA / IMPRESO EN CHINA 04ET(TINSE0745EH02)
NON-ADD / SUBTOTAL KEY: Non-add When this key is pressed right after an entry of a number in the Print mode, the entry is printed on the left-hand side with the symbol #. This key is used to print out numbers not subjects to calculation such as code, date, etc. Subtotal Used to get subtotal(s) of additions and/or subtractions. When pressed or key, the subtotal is printed with the symbol and the following the calculation may be continued. By pressing this key even in the Non-print mode, the displayed number is printed without any symbol. When the POWER SWITCH; PRINT / ITEM COUNT MODE SELECTOR is set , P or PIC position, and Date or Clock is displayed, press this key to print the displayed contents, including # symbol, from the left side of the paper roll. Example: Date printing #2004 (when the date is September 15, 2004) Clock printing # (when the time is 10:30 a.m.) #- - - - - - - - - - - (when the time is 6:25 p.m.) When the Date / Clock printing is complete, the Calculation mode is restored.

OPERATIONAL NOTES

To insure trouble-free operation of your SHARP calculator, we recommend the following: 1. The calculator should be kept in areas free from extreme temperature changes, moisture, and dust. 2. A soft, dry cloth should be used to clean the calculator. Do not use solvents or a wet cloth. 3. Since this product is not waterproof, do not use it or store it where fluids, for example water, can splash onto it. Raindrops, water spray, juice, coffee, steam, perspiration, etc. will also cause malfunction. 4. If service should be required, use only a SHARP servicing dealer, a SHARP approved service facility or SHARP repair service. 5. Do not operate this unit with the insulation sheet attached; the insulation sheet prevents the battery wear while shipping, and can be found on the back of the unit's body. If the insulation sheet is not removed, the previously set date and time, as well as the tax rate information will be cleared as soon as the AC power is accidentally unplugged. 6. Do not wind the AC cord around the body or otherwise forcibly bend or twist it.

M : Appears when a number is in the memory. E : Appears when a number is negative. : Appears when a number is in the grand total memory. : Appears when an overflow or other error is detected.

INK ROLLER REPLACEMENT

If printing is blurry even when the ink roller is in the proper position, replace the roller. Ink roller: Type EA-772R 2. Press the RESET switch located on the back of the unit. (See RESETTING THE UNIT.) * The clock starts, indicating the current date and time as January 1, 2005, 12:00:00 a.m. 2. Pulse el interruptor RESET situado en la parte posterior de la unidad. (Consulte "REPOSICIN DE LA UNIDAD".) * El reloj se pondr en funcionamiento, indicando la fecha y la hora actuales con 1 de enero, 2005, 12:00:00 a.m. Ajuste de la fecha y la hora Ejemplo: Cuando la fecha sea el 15 de septiemre de 2004, y la hora las 3:38 p.m. Operacin

RATE GT SET

CAMBIO DEL RODILLO ENTINTADOR
Si la impresin queda borrosa aunque est bien colocado el rodillo entintador, reemplace el rodillo. Rodillo entintador: Tipo EA-772R
WARNING APPLYING INK TO WORN INK ROLLER OR USE OF UNAPPROVED INK ROLLER MAY CAUSE SERIOUS DAMAGE TO PRINTER. 1) Set the power switch to OFF. 2) Remove the printer cover. (Fig. 1) 3) Hold the top of the ink roller and remove the roller by pulling it toward you and then upward. (Fig. 2) 4) Install the new ink roller in the correct position. Make sure that the roller is securely in place. (Fig. 3) 5) Put back the printer cover.
Adjusting date and time Example: When the date is September 15, 2004, and the time is 3:38 p.m. Operation
ADVERTENCIA ECHANDO TINTA EN UN RODILLO ENTINTADOR ROTO O USANDO UN RODILLO ENTINTADOR NO AUTORIZADO PUEDE CAUSAR DETERIOROS GRAVES EN LA IMPRESORA. 1) Ponga el interruptor de la alimentacin en OFF. 2) Saque la tapa de la impresora. (Fig. 1) 3) Sujete la parte superior del rodillo entintador y extraiga el rodillo tirando de l hacia usted y hacia arriba. (Fig. 2) 4) Instale el nuevo rodillo entintador en la posicin correcta. Cercirese de que el rodillo est firmemente colocado en su sitio. (Fig. 3) 5) Ponga de nuevo en su lugar la tapa de la impresora.

Display

Visualizacin

9-15-2004 3-P 0.

(see GRAND TOTAL / RATESETTING MODE SELECTOR) * When the adjustment is complete, the clock starts at 3:38:00 p.m.
(consulteSELECTOR DEL MODO DE TOTAL GLOBAL / FIJACIN DE TASA) * Cuando finalice el ajuste, el reloj comenzar a funcionar a las 3:38:00 p.m.

OPERATING CONTROLS

OFF P PIC ON
CONTROLES DE FUNCIONAMIENTO

Fig. 1

Fig. 2

Fig. 3

POWER SWITCH; PRINT / ITEM COUNT MODE SELECTOR:
INTERRUPTOR DE LA ALIMENTACIN; SELECTOR DEL MODO DE IMPRESIN / MODO PARA CONTAR ARTCULOS:

PAPER ROLL REPLACEMENT

Never insert paper roll if torn. Doing so will cause paper to jam. Always cut leading edge with scissors first. 1) Insert the leading edge of the paper roll into the opening. (Fig. 1). (Fig. 2) 2) Turn the power on and feed the paper by pressing 3) Lift the attached metal paper holder up and insert the paper roll to the paper holder. (Fig. 3)
CAMBIO DEL ROLLO DEL PAPEL
Nunca introduzca un rollo de papel roto. Esto causar atascos del papel. Corte siempre en primer lugar el borde anterior. 1) Introduzca el borde del papel del rollo de papel en la abertura. (Fig. 1). (Fig. 2) 2) Conecte la alimentacin y haga avanzar el papel pulsando 3) Levante el soporte metlico para papel incorporado e introduzca el rollo de papel en el soporte. (Fig. 3)
ROUNDING SELECTOR: Example: Set Decimal Selector to 2. = 0.444. , = 0.555. 4 5/0.45 0.44 0.9 0.56 0.56 0.55.
SELECTOR DE REDONDEO: Ejemplo: Fije el selector decimal en 2. = 0.444. , = 0.555. 4 5/0.45 0.44 0.9 0.56 0.56 0.55
or Note: The decimal point floats during successive calculation by the use of If the decimal selector is set to F then the answer is always rounded down ( ).
o Nota: El punto (= coma) decimal flota mientras se hacen clculos sucesivos usando. Si el selector decimal se coloca en F, la respuesta siempre se redondea por defecto ( ).
GRAND TOTAL / RATE SETTING MODE SELECTOR:
SELECTOR DEL MODO DE TOTAL GLOBAL / FIJACIN DE TASA: DO NOT PULL PAPER BACKWARDS AS THIS MAY CAUSE DAMAGE TO PRINTING MECHANISM. NO TIRE DEL PAPEL HACIA ATRS YA QUE PODRA OCASIONAR DAOS AL MECANISMO DE IMPRESIN.
GT: Grand Total : Neutral RATE SET: To set the date, time, and tax rate, set this switch at the RATE SET position. Date: to complete the entry. Enter in the order of month, day and year, then press Use to separate month, day, and year. When is pressed, the number entered is evaluated and displayed as date if the value is within the following range; Error is displayed otherwise, and the previously set date is restored. Month: 1 - 12; day: 1 - 31; Year: 2000 - 2099 (in 4 digits) or 00 - 99 (in 2 digits) Time: to complete the entry. Enter in the order of hour, minutes, then press (There is no entry available for the seconds value. The clock starts at zero second.) If the hour/minute digit is less than 10, it is not necessary to enter the first digit 0. to separate hour and minute values. Use is pressed, the number entered is evaluated and displayed as time if the When value is within the following range; Error is displayed otherwise, and the previously set time is restored. Hour: 0 - 23 (24-hour system for the hour entry), Minute: 0 - 59

If / Si el

Monday / Lunes.. Tuesday / Martes.. Wednesday / Mircoles. Thursday / Jueves. Friday / Viernes..
Total Sales $656.00 for 5 days El total de ventas de los 5 das = $656,00 Then Average Sales = $131.20 / Por lo tanto: Promedio de las ventas = $131,20

RATE ON OFF P PIC GT SET

123.15 241.15 372.73 497.75 656.00

65600

+ + + + +

LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the Product), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Your Product : Warranty Period for this Product : Additional Items Excluded from Warranty Coverage : Electronic Calculator Six (6) months parts and labor from date of purchase.

13120 G 131.20

PRINTING DATE AND TIME IMPRESIN DE LA FECHA Y LA HORA
EXAMPLE: When on October 20, 2005, 1:52:00 p.m. EJEMPLO: En el 20 de octubre de 2005, a las 1:52:00 p.m. *1 10-20-2005. 0. 1-P. 0.
ADDITION AND SUBTRACTION WITH ADD MODE SUMA Y RESTA CON MODO DE SUMA
12.45 + 16.24 + 19.35 5.21 = *2 #10202005 12.45 28.69 48.04 42.83
#152 - - - - - - - - - - - 42.83 *2 : *2 : La was not used in the entries. no ha sido usada en las introducciones.

002 4283

+ + +
Caution! The socket outlet shall be installed near the equipment and shall be easily accessible. Precaucin! La toma de corriente debe estar instalado cerca del equipo y debe quedar bien accesible.
*1 : If the date is not shown on the display, press to show the date. para hacer que se indique. *1 : Si la fecha no se muestra en el visualizador, pulse
MIXED CALCULATIONS / CLCULOS MIXTOS

A. + 12 = 5.

www.sharpusa.com
For your convenience, Genuine Sharp Supplies. Accessories, and additional Sharp Products can be purchased from the Authorized Sharp Reseller where you purchased your product or on-line at:
B. (10 + 2) 5 = 5 10. 12. 12. 60 + + =
Any consumable items such as paper, maintenance cartridge, ink cartridges supplied with the Product or to any equipment or any hardware, software, firmware, fluorescent lamp, power cords, covers, rubber parts, or peripherals other than the Product. At a Sharp Authorized Servicer located in the United States. To find out the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP.

= + 12 + 002 22

Where to Obtain Service :

10. 10. 22.

www.sharpplace.com
What to do to Obtain Service : Ship (prepaid) or carry in your Product to a Sharp Authorized Servicer. Be sure to have proof of purchase available. If you ship or mail the Product, be sure it is packaged carefully. TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.