ELECTRONIC PRINTING CALCULATOR CALCULADORA IMPRESORA ELECTRNICA
OPERATION MANUAL MANUAL DE MANEJO

EL-2196BL

Note: Each time the key is used in the subtraction, 1 will be subtracted from the count. The count is printed when the memory is recalled. Pressing of the key clears the counter. Note: The counter has a maximum capacity of 3 digits (up to 999). If the count exceeds the maximum, the counter will recount from zero.
en la resta, Notas: Cada vez que se use la tecla 1 ser restado de la cuenta. La cuenta queda impresa al llamarse la memoria. Apretando la tecla se borra el contador. Nota: El contador tiene una capacidad de un mximo de 3 cifras (hasta 999). Si la cuenta excede el mximo, el contador vuelve a contar partiendo de cero.
NON-ADD/SUBTOTAL KEY: Non-add When this key is pressed right after an entry of a number in the Print mode, the entry is printed on the left-hand side with the symbol #. This key is used to print out numbers not subjects to calculation such as code, date, etc. Subtotal Used to get subtotal(s) of additions and/ or subtractions. When pressed following the or key, the subtotal is printed with the symbol and the calculation may be continued. By pressing this key even in the Non-print mode, the displayed number is printed with the symbol P. When the POWER SWITCH; PRINT / ITEM COUNT MODE SELECTOR is set , P or PIC position, and Date or Clock is displayed, press this key to print the displayed contents, including # symbol, from the left side of the paper roll. Example: Date printing #2004 (when the date is September 15, 2004) Clock printing # A (when the time is 10:30 a.m.) #- - - - - - - - - - - P (when the time is 6:25 p.m.) When the Date / Clock printing is complete, the Calculation mode is restored.
TECLA DE NO SUMA/TOTAL PARCIAL: No-suma Cuando se aprieta esta tecla inmediatamente despus de haber ingresado un nmero en el modo de impresin, el nmero registrado se imprime a la izquierda, junto con el smbolo #. Esta tecla se usa para imprimir nmeros que no estn sujetos a clculos como, por ejemplo, cdigos, fechas, etc. Total parcial Se usa para obtener uno o varios totales parciales de sumas y/o restas. Cuando se aprieta a continuacin de la tecla o , se imprimir el total parcial junto con el smbolo pudindose seguir con los clculos. Al apretar esta tecla, incluso en el modo de no impresin, se imprimir el nmero que aparece en la exhibicin con el smbolo P. Cuando el INTERRUPTOR DE LA ALIMENTACIN; SELECTOR DEL MODO DE IMPRESIN / MODO PARA CONTAR ARTCULOS est en la posicin o P o PIC, y est visualizndose la fecha o la hora, pulse esta tecla para imprimir el contenido visualizado, incluyendo el smbolo #, desde el lado derecho del rollo de papel. Ejemplo: Impresin de la fecha #2004 (cuando la fecha sea el 15 desetiembre de 2004) Impresin del reloj # A (cuando la hora sea 10:30 a.m.) #- - - - - - - - - - - P (cuando la hora sea 6:25 p.m.) Cuando finalice la impresin de la fecha / hora, volver al modo de clculo. SMBOLOS DEL VISUALIZADOR: M : Un nmero ha sido guardado en la memoria. : El valor del display es negativo. E : Error desbordamiento de la capacidad. : Aparece cuando un nmero est en la memoria de total global.

DECIMAL SELECTOR:

WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
SELECTOR DECIMAL: Prefija el nmero de lugares decimales de la respuesta. En F, la respuesta aparecer en la exhibicin en el sistema decimal flotante.
Presets the number of decimal places in the answer. In the F position, the answer is displayed in the floating decimal system.
CONSTANT/ADD MODE SELECTOR: K: The following constant functions will be performed: Multiplication: The calculator will automatically remember the first number entered (the multiplicand) and instruction. Division: The calculator will automatically remember the second number entered (the divisor) and instruction. : Neutral A: Use of the Add mode permits addition and subtraction of numbers without an entry of the decimal point. When the Add mode is activated, the decimal point is automatically positioned according to the decimal selector setting. , and will automatically override the Use of Add mode and decimally correct answers will be printed at the preset decimal position.

INK RIBBON REPLACEMENT

1.Remove the paper roll from the calculator. (Tear the paper and remove it from the print mechanism by using.) 2.Turn the power off before replacing ribbon. 3.Remove the printer cover. (Fig. 1) 4.Remove the old ribbon by pulling it up. 5.Insert the new ribbon. 6.With the black side of the ribbon facing upwards, place one of the reels on the reel shaft on the right. (Fig. 2) Make sure that the reel is securely in place. 7.Thread the ribbon around the outside of the metal guides. (Fig. 3) 8.Take up any slack by manually turning one of the reels. 9.Replace the printer cover. (Fig. 4) 10.Replace the paper roll.
CAMBIO DE LA CINTA ENTINTADA
1.Quitar el rollo de papel de la calculadora. (Cortar el papel y sacarlo del mecanismo impresor usando.) 2.Desconecte el aparato antes de cambiar la cinta. 3.Sacar la tapa de la impresora. (Fig. 1) 4.Retire el rollo viejo empujando hacia arriba. 5.Introduzca la cinta nueva. 6.Con el lado negro de la cinta mirando para arriba, colocar uno de los carretes en el eje del carrete de la izquierda. (Fig. 2) Asegurarse de que el carrete est firmemente colocado en su lugar. 7.Pasar la cinta por la parte exterior de las quas metlicas. (Fig. 3) 8.Estirar cualquier parte de cinta floja girando con la mano uno de los carretes. 9.Volver a poner la tapa de la impresora. (Fig. 4) 10. Volver a poner el rollo de papel.
SHARP will not be liable nor responsible for any incidental or consequential economic or property damage caused by misuse and/or malfunctions of this product and its peripherals, unless such liability is acknowledged by law.
USING THE CALCULATOR FOR THE FIRST TIME
First, pull out the insulation sheet for the memory protection battery (installed for retaining the date/time/tax rate information). Reset the calculator to initialize the unit's state, then adjust the date and time before using the calculator.
UTILIZACIN DE LA CALCULADORA POR PRIMERA VEZ
En primer lugar, tire de la lmina aislante para la pila de proteccin de la memoria (instalada para conservar la informacin sobre la fecha/hora/tasa de impuestos). Reponga la calculadora para inicializar el estado de la unidad, y despus ajuste la fecha y la hora antes de utilizarla. Extraccin de la lmina aislante, y reposicin 1. Tire de la lmina aislante para la pila de proteccin de la memoria.
Removing the insulation sheet, and resetting 1. Pull out the insulation sheet for the memory protection battery.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

PAPER ROLL REPLACEMENT

Never insert paper roll if torn. Doing so will cause paper to jam.
CAMBIO DEL ROLLO DEL PAPEL
Nunca introduzca un rollo de papel roto. Esto causar atascos del papel. Corte siempre en primer lugar el borde anterior. 1) Introduzca el borde del papel del rollo de papel en la abertura. (Fig. 1) 2) Conecte la alimentacin y haga avanzar el papel. (Fig. 2) apretando 3) Introduzca el rollo de papel en el soporte. (Fig. 3)
2. Press the RESET switch located on the back of the unit. (See RESETTING THE UNIT.) * The clock starts, indicating the current date and time as January 1, 2005, 12:00:00 a.m. Adjusting date and time Example: When the date is September 15, 2004, and the time is 3:38 p.m.
2. Pulse el interruptor RESET situado en la parte posterior de la unidad. (Consulte "REPOSICIN DE LA UNIDAD".) * El reloj se pondr en funcionamiento, indicando la fecha y la hora actuales con 1 de enero, 2005, 12:00:00 a.m. Ajuste de la fecha y la hora Ejemplo: Cuando la fecha sea el 15 de septiemre de 2004, y la hora las 3:38 p.m. Operacin

RATE GT SET

Always cut leading edge with scissors first. 1) Insert the leading edge of the paper roll into the opening. (Fig. 1) 2) Turn the power on and feed the paper by pressing (Fig. 2) 3) Insert the paper roll to the paper holder. (Fig. 3)

Operation

Display

Visualizacin

DO NOT PULL PAPER BACKWARDS AS THIS MAY CAUSE DAMAGE TO PRINTING MECHANISM.

9-15-2004 3-P 0.

(see GRAND TOTAL / RATE SETTING MODE SELECTOR) * When the adjustment is complete, the clock starts at 3:38:00 p.m.
(consulteSELECTOR DEL MODO DE TOTAL GLOBAL / FIJACIN DE TASA) * Cuando finalice el ajuste, el reloj comenzar a funcionar a las 3:38:00 p.m.
CLOCK / CALENDAR KEY: Each time this key is pressed, the mode switches. Calculation mode Date display mode Clock display mode Calculation mode Use this key also to adjust date and time (see GRAND TOTAL / RATE SETTING MODE SELECTOR).

NO TIRAR DEL PAPEL HACIA ATRS PUES PUEDE OCASIONAR DAOS AL MECANISMO DE IMPRESIN.

ERRORS

There are several situations which will cause an overflow or an error condition. When this occurs, E will be displayed. The contents of the memory at the time of the error are retained. If an 0E is displayed at the time of the error, must be used to clear the calculator. If an E with any numerals except zero is displayed, the error may be cleared with or and the calculation can still be continued. Also, in rare cases, printing may stop midway and the indication E appear on the display. This is not a malfunction but is caused when the calculator is exposed to strong electromagnetic noise or static electricity from an external source. Should this occur, press the key and then repeat the calculation from the beginning.

ERRORES

Existen diversos casos en los que ocurre un exceso de capacidad o una condicin de error. Al producirse esto, aparecer E. Los contenidos de la memoria, en el momento del error, quedan retenidos. Si, al ocurrir el error, se visualiza el smbolo 0E, se deber usar para borrar la calculadora. Si se visualiza el smbolo E con cualquier nmero (excepto el cero), se puede borrar el error con o pudindose continuar el clculo. Adems, en casos muy raros, la impresin puede pararse en la mitad, y en el visualizador puede aparecer la indicacin E. Esto no significa mal funcionamiento, sino que se debe a que la calculadora ha estado expuesta a ruido electromagntico intenso o electricidad esttica de una fuente externa. Cuando ocurra esto, presione la tecla y despus repita el clculo desde el principio. Condiciones de error: 1. Entrada de ms de 12 cifras o de 11 decimales. Este error puede borrarse con o. 2. Cuando la parte entera de un resultado excede las 12 cifras. 3. Cuando la parte entera del contenido de la memoria o la memoria del total global supere12 dgitos. ) (Ej. 4. Cuando se divide un nmero cualquiera por un divisor de cero. (Ej. )

EL-2196BL(U1U)-1

PAPER FEED KEY

OPERATING CONTROLS

POWER SWITCH; PRINT / ITEM COUNT MODE SELECTOR: OFF: Power off. :Power ON. Set to the non-print mode. P: Power ON. Set to the print mode. PIC: Power ON. Set to the print and item count mode. 1) The counter will count the number of times that the key has been pressed in addition. Note: Each time the key is used in subtraction, 1 will be subtracted from the count. The count is printed when the calculated result is obtained. , , or key clears Pressing of the the counter. 2) When the grand total/rate setting mode selector is in the ON position (GT), the counter will count the number of times that the calculation results have been stored in the grand total memory. To print and clear the count, press the key. 3) The memory item counter will count the number of times that the key has been pressed in the addition.

CONTROLES DE FUNCIONAMIENTO
INTERRUPTOR DE CORRIENTE; SELECTOR DEL MODO DE IMPRESIN / MODO PARA CONTAR ARTCULOS: OFF: Apagado (OFF) : Encendido (ON). Fija el modo de no impresin. P: Encendido (ON). Fija el modo de impresin. PIC: Encendido (ON). Fija el modo de impresin y de cuenta de articulos. 1) El contador contar las veces que se ha apretado la tecla en la suma. en la resta, Nota: Cada vez que se use la tecla se restar 1 de la cuenta. La cuenta queda impresa cuando se obtiene el resultado calculado. Al apretar la tecla , , o se borra el contenido del contador. 2) Cuando est activado el selector del modo de total global/fijacin de tipos (posicin GT), el contador contar el nmero de veces que se han almacenado los resultados de clculo en la memoria del total global. Para imprimir y borrar la cuenta, apretar la tecla. 3) El contador de artculos en memoria contar el nmero de veces que la tecla ha sido apretada en la suma.
LAST DIGIT CORRECTION KEY GRAND TOTAL KEY CLEAR ENTRY KEY TOTAL KEY: Press this key twice, followed by , to print the set tax rate. The tax rate is printed with the symbol TX. MULTIPLICATION KEY DIVISION KEY MINUS EQUAL KEY PLUS EQUAL KEY CHANGE SIGN KEY MARKUP KEY MEMORY TOTAL CLEAR KEY MEMORY SUBTOTAL RECALL KEY MEMORY PLUS KEY MEMORY MINUS KEY TAX-INCLUDING KEY PRE-TAX KEY PERCENT KEY
Error conditions: 1. Entry of more than 12 digits or 11 decimals. This error can be cleared with or. 2. When the integer portion of an answer exceeds 12 digits. 3. When the integer portion of the contents of the memory or grand total memory exceeds12 digits. ) (Ex. 4. When any number is divided by zero. (Ex. )

Page 1

04.10.15, 2:01 PM

, , , , , , , , , , ,

REPLACEMENT OF BATTERY FOR MEMORY PROTECTION
Time for battery replacement Life of the memory protection battery is approximately 2,500 hours at 25C(77F) with the power plug not connected to the socket. * When the memory protection battery is weak, the date/ time setting is initialised (1/1/2005, 12:00:00 a.m.). Verify the date/time setting in the date/clock display mode when connecting the power plug to the socket. If the date/time setting is modified or incorrect, promptly replace the memory protection battery with new one. (The life of the pre-installed battery may be shorter than expected because of the time the calculator spends during shipment.)

MARKUP AND MARGIN

Markup and Profit Margin are both ways of calculating percent profit. Profit margin is percent profit vs. selling price. Markup is percent profit vs. cost. Cost is the cost. Sell is the selling price. GP is the gross profit. Mkup is the percent profit based on cost. Mrgn is the percent profit based on selling price.
PERCENT CHANGE/CAMBIO PORCENTUAL
Calculate the dollar difference (a) and the percent change (b) between two yearly sales figures $1,500 in one year and $1,300 in the previous year. Calcular la diferencia en dlares (a) y el cambio porcentual (b) entre dos cifras de ventas anuales, $1.500 en un ao y $1.300 el ao anterior.
INCREMENTO PORCENTUAL Y MARGEN
Tanto la funcin del incremento porcentual como la del margen de beneficio son formas de calcular el beneficio porcentual. El margen de beneficio es el beneficio porcentual con respecto al precio de venta. El incremento porcentual es el beneficio porcentual con respecto al coste. Cost es el coste. Sell es el precio de venta. GP es el beneficio bruto. Mkup es el beneficio porcentual basado en el coste. Mrgn es el beneficio porcentual basado en el precio de venta.
To find Para encontrar Mrgn Mkup Sell Cost Sell Cost Knowing Sabiendo Sell, Cost Sell, Cost Cost, Mrgn Sell, Mrgn Cost, Mkup Sell, Mkup Cost Sell Cost Sell Cost Sell Operation Operacin Sell Cost Mrgn Mrgn Mkup Mkup

1500 1300

1,500.00 200.00

1,50000 + 1,(a)

1538 %C (b) 15.38
Method of battery replacement Use one lithium battery (CR2032). Caution: Replacing the battery will clear the date and time settings, and the stored tax rate. 1) Turn the power switch OFF and unplug the power supply plug from the outlet. 2) Remove the battery cover on the back of the unit. (Fig. 1) 3) Remove the exhausted battery and install one new lithium battery. Wipe the battery well with a dry cloth and place the plus + side upward. (Fig. 2) 4) Replace the battery cover by reversing the removal procedure. 5) Press the RESET switch on the back of the unit (See RESETTING THE UNIT).
ITEM COUNT CALCULATION/ CLCULO DE CUENTA DE ARTCULOS
Bill No. N de factura 5 Total Number of bills Cantidad de facturas 1 (a) Amount Importe $100.55 $200.00 $200.00 $400.55 $500.65 (b)

CALCULATION EXAMPLES

1. Set the decimal selector as specified in each example. The rounding selector should be in the 5/4 position unless otherwise specified. 2. The constant/add mode selector and grand total/rate setting mode selector should be in the position (off) unless otherwise specified. 3. The print/item count mode selector should be in the P position unless otherwise specified. 4. If an error is made while entering a number, press or and enter the correct number. 5. Negative values are printed with symbol in red.

EXAMPLE: EJEMPLO: Operation Operacin
When on October 20, 2005, 1:52:00 p.m. En el 20 de octubre de 2005, a las 1:52:00 p.m.
100 100. 300. 600. 003 #10202005 500 #152 - - - - - - - - - - - - P 600. 500. 100. 600. + 600. + 500 + +

Display Visualizacin

10-20-2005. 0.

Print Impresin

200 300
Precautions on battery use Do not leave an exhausted battery in the equipment. Do not expose the battery to water or flame, and do not take it apart. Store batteries out of the reach of small children.

1-P. 0.

5. TX 5000 % 5.000
*1 : If the date is not shown on the display, press to show the date. *1 : Si la fecha no se muestra en el visualizador, pulse para hacer que se indique.
Notes for handling Lithium batteries: CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions.
Notas para el manejo de las bateras de litio: PRECAUCIN Peligro de explosin si reemplaza incorrectamente la batera. Reemplcela por otra igual o de tipo equivalente recomendada por el fabricante. Deshgase de las bateras de acuerdo con las instrucciones del fabricante.
MIXED CALCULATION/CLCULOS MIXTOS

(240 + 180 + 180 75) 8 =

240. 420. 600. 75 525. 240 + 180 + 180 + 525. = 4,200 4,200.
ADDITION AND SUBTRACTION WITH ADD MODE/ SUMA Y RESTA CON MODO DE SUMA
12.45 + 16.24 + 19.35 5.21 =

1,200 G 1,200.

---------------------------------------------

MEMORY/MEMORIA

Operation Operacin

1935 521

TX 840 840.

Display Visualizacn

12.45 28.69 48.04 42.83

1245 + 1624 + 1935 +

= +)= ) = Total
* 3,588.M 25.M 72.M 576.M 001 125.M 46. = 3,588 +M = 25 +M = 576 M 3,037 M 3,037.M 001 3,037 M 3,037.M 840 525

SPECIFICATIONS

Operating capacity: 12 digits Power supply: Operating: AC: 120V, 60Hz Memory backup: 3V. (DC) (Lithium battery CR2032 1) Memory Protection Battery lifespan: About 2,500 hours (While at 25C(77F), and the power plug is not connected to the socket.) CLOCK SECTION Accuracy: Within 90 seconds per month average (at 25C(77F)) Items to be displayed: month, day, year, hour, minute, second, a.m. A, p.m. P Items to be printed: month, day, year, hour, minute, a.m. A, p.m. P Time system: 12-hour PRINTING SECTION Printer: Mechanical printer Printing speed: Approx. 3.7 lines/sec. (at room temperature of 25C (77F)) Printing paper: 57 mm(2-1/4") - 58 mm(2-9/32") wide 80 mm(3-5/32") in diameter (max.) Operating temperature: 0C 40C (32F 104F) Power consumption: 116 mA Dimensions: 222 mm (W) 327 mm (D) 79 mm (H) (8-3/4" (W) 12-7/8" (D) 3-1/8" (H)) Weight: Approx. 1.84 kg (4.06 lb.) (with battery) Accessories: 1 lithium battery(installed), 1 battery replacement date label (attached on the unit's back body), 1 paper roll, 1 ink ribbon (installed), and operation manual

LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the Product), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Your Product : Warranty Period for this Product : Electronic Calculator Six (6) months parts and labor from date of purchase.

PERCENT/PORCENTAJES

100 25% =
ADD-ON AND DISCOUNT/ RECARGOS Y DESCUENTOS
A 5% add-on to 100./ Un 5% de recargo sobre 100.

www.sharpusa.com

% Increase Incremento 10500 New amount Nueva cantidad 500
For your convenience, Genuine Sharp Supplies. Accessories, and additional Sharp Products can be purchased from the Authorized Sharp Reseller where you purchased your product or on-line at:
WARNING THE VOLTAGE USED MUST BE THE SAME AS SPECIFIED ON THIS CALCULATOR. USING THIS CALCULATOR WITH A HIGHER VOLTAGE THAN THAT WHICH IS SPECIFIED IS DANGEROUS AND MAY RESULT IN A FIRE OR OTHER TYPE OF ACCIDENT CAUSING DAMAGE. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE RESULTING FROM USE OF THIS CALCULATOR WITH A VOLTAGE OTHER THAN THAT WHICH IS SPECIFIED.

100 100. % 2500 25.00

EL VOLTAJE UTILIZADO DEBE SER EL ESPECIFICADO EN ESTA CALCULADORA. ES PELIGROSO USAR ESTA CALCULADORA CON UN VOLTAJE SUPERIOR AL ESPECIFICADO YA QUE PODRA PRENDERSE FUEGO O PRODUCIRSE OTRO TIPO DE ACCIDENTES CON DAOS PERSONALES. NO NOS HACEMOS RESPONSABLES DE CUALQUIER DAO QUE PUEDA OCASIONARSE AL UTILIZAR ESTA CALCULADORA CON UN VOLTAJE SUPERIOR AL ESPECIFICADO.

www.sharpplace.com

(123 1368) 100 =
123. 123 1,368 % 899 8.99

105.00

Additional Items Excluded Any consumable items such as paper, maintenance cartridge, ink from Warranty Coverage : cartridges supplied with the Product or to any equipment or any hardware, software, firmware, fluorescent lamp, power cords, covers, rubber parts, or peripherals other than the Product. Where to Obtain Service : At a Sharp Authorized Servicer located in the United States. To find out the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP.
A 10% discount on 100./ Un 10% de descuento sobre 100.

100. % 9000 90.00 1000

What to do to Obtain Service : Ship (prepaid) or carry in your Product to a Sharp Authorized Servicer. Be sure to have proof of purchase available. If you ship or mail the Product, be sure it is packaged carefully. TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.

FOR YOUR RECORDS..

For your assistance in reporting this electronic calculator in case of loss or theft, please record below the model number and serial number which are located on the bottom of the unit. Please retain this information. Model Number Date of Purchase Serial Number Place of Purchase

Printing Calculator Mail-in Rebate Calculator Calculator Calculator Calculator Calculator
on Sharp Printing Calculators
Models: EL-1750V, EL-1801V, EL-1197PIII, EL-2196BL, and EL-2630PIII Offer Valid 1/1/11 through 4/2/11
See back panel for details.
*Does not apply to purchases made at OfficeMax, Staples, Staples.com, or membership warehouse clubs.

Mail-in Rebate*

To receive your rebate check you must:
1. Purchase a qualifying SHARP brand Printing Calculator from eligible stores between 1/1/11 and 4/2/11 2. Enclose a clear copy of your dated sales receipt. Keep the original for your records. 3. Enclose the original UPC symbol cut from the package (including the numbers below the UPC symbol).
Cut out the UPC symbol and numbers below it found on the back panel
For rebate questions call: 1-866-745-5452 or check your status online at: www.rebate-zone.com/sharp Name Address City Store Name Email Address
(will be used to confirm receipt of this submission)

Model Purchased

7400012345
4. Enclose this completed coupon. Rebate offer and qualifying models: $5 $10 $15 EL-1750V or EL-1801V EL-1197PIII, EL-2196BL EL-2630PIII Sharp Printing Calculator Rebate Dept. H640374 P.O. Box 100489 White Bear Lake, MN 55110-0489
Thank you for your business. If you would like to receive future emails from Sharp Electronics on special money saving offers and product information, please check the space provided.
OFFER APPLIES ONLY TO MODELS LISTED. Offer is available only on purchases of a qualifying SHARP Printing Calculator from eligible stores (not valid at Staples, Staples.com, OfficeMax or Membership warehouse clubs) and cannot be combined with any other rebate offer. SHARP distributors and dealers may not participate in this offer. This coupon must accompany your request. Sales receipt must be dated between January 1, 2011 and April 2, 2011. Please allow 6-8 weeks for receipt of check. Limit one rebate per household, except where prohibited by law. Requests for rebate must be postmarked on or before May 2, 2011. Offer subject to availability. Void where prohibited. Offer good only on purchases within U.S., its territories, and possessions. Not responsible for lost or misdirected mail.

Send to:

Sharp is a registered trademark of Sharp Corporation.