# Sharp EL-531VH

# Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.

Download
(English) Sharp EL-531VH, size: 86 KB |
Related manualsSharp EL-531VH Operation Manual Sharp EL-531VH Operation-examples |

*Download*and complete offer, you will get access to list of direct links to websites where you can download this manual.

### About

**About Sharp EL-531VH**

Here you can find all about Sharp EL-531VH like manual and other informations. For example: user manual, instructions, calculator standard deviation.

Sharp EL-531VH manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sharp EL-531VH please write about it to help other people.

[

**Report abuse**or wrong photo | Share your Sharp EL-531VH photo ]

### User reviews and opinions

ShakaZ |
2:14pm on Monday, August 30th, 2010 |

Great value / easy to use Do not let the price fool you, this calculator can do it all. | |

eASYkILL |
4:06pm on Sunday, August 22nd, 2010 |

Good calculator Bought this calculator for my daughter, as it was the one recommended by her school. |

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

### Documents

ENGLISH

#### SCIENTIFIC CALCULATOR

EL-509V EL-509VH

#### MODEL EL-531V EL-531VH

OPERATION MANUAL

PRINTED IN CHINA / IMPRIM EN CHINE 00KUP (TINSK0424THZZ)

The multi-line memory is cleared by the following operations: @c, @F (including the Automatic Power Off feature), mode change, RESET, @`, @?, constant calculation, angle conversion/change, coordinate conversion, numerical value storage to the temporary memories and independent memory, and input/deletion of statistical data.

#### Chain Calculations

This calculator allows the previous calculation result to be used in the following calculation. For example, you can calculate by = and s=. The previous calculation result will not be recalled after entering multiple instructions.

Calculation ranges 10-99 ~ 9.9999999991099 and 0. If the absolute value of an entry or a final or intermediate result of a calculation is less than 1099, the value is considered to be 0 in calculations and in the display.

Priority Levels in Calculation

This calculator performs operations according to the following priority: Functions preceded by their argument (x-1, x2, n!, etc.) Implied multiplication of a memory value (2Y, etc.) Yx, x Functions followed by their argument (sin, cos, etc.) Implied multiplication of a function (2sin30, etc.) nCr, nP r , +, =, M+, M, M, |DEG, |RAD, |GRAD, DATA, CD, r, xy and other calculation ending instruction If parentheses are used, parenthesized calculations have precedence over any other calculations.

#### Fraction Calculations

BATTERY REPLACEMENT Notes on Battery Replacement

Improper handling of batteries can cause electrolyte leakage or explosion. Be sure to observe the following handling rules: Replace both batteries at the same time. Do not mix new and old batteries. Make sure the new batteries are the correct type. When installing, orient each battery properly as indicated in the calculator. Batteries are factory-installed before shipment, and may be exhausted before they reach the service life stated in the specifications.

#### INTRODUCTION

About operation examples, please refer to the attached sheet. Refer to the number on the right of each title for use. After reading this manual, store it in a convenient location for future reference. Note: Some of the models described in this manual may not be available in some countries.

This calculator performs arithmetic operations and memory calculations using a fraction, and conversion between a decimal number and a fraction. In all cases, a total of up to 10 digits including integer, numerator, denominator and the symbol (l) can be entered. If the number of digits to be displayed is greater than 10, the number is converted to and displayed as a decimal number. A decimal number, variable, or exponent cannot be used in a fraction.

Time, Decimal and Sexagesimal Calculations

#### Operational Notes

To ensure trouble-free operation, please observe the following points: 1. Do not carry the calculator in the back pocket of slacks or trousers. 2. Do not subject the calculator to extreme temperatures. 3. Do not drop it or apply excessive force. 4. Clean only with a soft, dry cloth. 5. Do not use or store the calculator where fluids can splash onto it. o Press the RESET switch only in the following cases: When using for the first time After replacing the batteries To clear all memory contents When an abnormal condition occurs and all keys are inoperative. If service should be required on this calculator, use only a SHARP servicing dealer, SHARP approved service facility, or SHARP repair service where available.

INITIAL SETUP Mode Selection

Normal mode (NORMAL): @m0 Used to perform arithmetic operations and function calculations. Single-variable statistics mode (STAT x): @m1 Used to perform 1-variable statistical calculations. Two-variable statistic mode (STAT xy): @m2 Used to perform 2-variable statistical calculations. When executing mode selection, temporary memories, statistical data and last answer memory will be cleared even when reselecting the same mode.

Conversion between decimal and sexagesimal numbers can be performed. In addition, the four basic arithmetic operations and memory calculations can be carried out using the sexagesimal system.

When to Replace the Batteries

If the display has poor contrast, the batteries require replacement.

#### Coordinate Conversions

Y y 0 x X P (x,y) Y P (r, ) r 0

Before performing a calculation, select the angular unit.

#### Caution

Keep batteries out of the reach of children. Exhausted batteries left in the calculator may leak and damage the calculator. Explosion risk may be caused by incorrect handling. Batteries must be replaced only with others of the same type. Do not throw batteries into a fire as they may explode.

#### Rectangular coord.

Polar coord.

The calculation result is automatically stored in memories X and Y. Value of r or x: X memory Value of or y: Y memory

#### Replacement Procedure

1. 2. 3. 4. Turn the power off by pressing @ F. Remove two screws. (Fig. 1) Slide the battery cover slightly and lift it to remove. [EL-509V/EL-531V] Remove the used batteries by prying them with a ball-point pen or other similar pointed device. (Fig. 2) [EL-509VH/EL-531VH] Remove used batteries. Install two new batteries. [EL-509V/EL-531V] Make sure the + side facing up. [EL-509VH/EL-531VH] First insert the side to the spring. (Fig. 3) Replace the back cover and screws. Press the RESET switch (on the back). Make sure that the display appears as shown below. If the display does not appear as shown, remove the batteries reinstall them and check the display once again.

#### Modify Function

Selecting the Display Notation and Decimal Places

The calculator has four display notation systems for displaying calculation results. When FIX, SCI, or ENG symbol is displayed, the number of decimal places can be set to any value between 0 and 9. Displayed values will be reduced to the corresponding number of digits.

1000003= [Floating point] 100000/3= [Fixed decimal point] @f [TAB set to 2] @i 2 [SCIentific notation] @f [ENGineering notation] @f [Floating point] @f 33333.33333 33333.33333 33333.33 3.33104 33.33103 33333.33333

#### Hard Case

In this calculator, all calculation results are internally obtained in scientific notation with up to 12 digits for the mantissa. However, since calculation results are displayed in the form designated by the display notation and the number of decimal places indicated, the internal calculation result may differ from that shown in the display. By using the modify function, the internal value is converted to match that of the display, so that the displayed value can be used without change in subsequent operations.

#### STATISTICAL CALCULATIONS

Press @ m 1 to select single-variable statistics mode and @ m 2 to select two- variable statistics mode. The following statistics can be obtained for each statistical calculation (refer to the table below):

#### 6. 7.

DISPLAY

Equation Display Mantissa Symbol

If the value for floating point system does not fit in the following range, the calculator will display the result using scientific notation system: 0.000000001 | x | 9999999999

Single-variable statistical calculation

#### Statistics of

Exponent

#### (12) (13)

(Fig. 1)

#### (Fig. 2)

(Fig. 3)

Determination of the Angular Unit

In this calculator, the following three angular units can be specified.

#### DEG ()

(During actual use not all symbols are displayed at the same time.) If the value of mantissa does not fit within the range 0.000000001 9999999999, the display changes to scientific notation. The display mode can be changed according to the purpose of the calculation.

Linear regression calculation

#### Press G

GRAD (g) RAD (Radians)

Statistics of and and, in addition, estimate of y for a given x (estimate y) and estimate of x for a given y (estimate x)

: Appears when the entire equation cannot be displayed. Press </> to see the remaining (hidden) section. : Appears when @ is pressed, indicating that the functions shown in orange are enabled. : Indicates that h has been pressed and the hyperbolic functions are enabled. If @ H are pressed, the symbols 2ndF HYP appear, indicating that inverse hyperbolic functions are enabled.

#### 2ndF HYP

SCIENTIFIC CALCULATIONS

Press @ m 0 to select the normal mode. In each example, press to clear the display. And if the FIX, SCI, or ENG indicator is displayed, clear the indicator by pressing @ f.

ALPHA: Indicates that @ K or O (R) has been pressed, and entry (recall) of memory contents and recall of statistics can be performed. FIX/SCI/ENG: Indicates the notation used to display a value and changes each time @ f are pressed. DEG/RAD/GRAD: Indicates angular units and changes each time G is pressed.

#### Arithmetic Operations

The closing parenthesis ) just before = or ; may be omitted.

#### Constant Calculations

x sx x n x x2 y sy y y y2 xy r a b

Mean of samples (x data) Sample standard deviation (x data) Population standard deviation (x data) Number of samples Sum of samples (x data) Sum of squares of samples (x data) Means of samples (y data) Sample standard deviation (y data) Population standard deviation (y data) Sum of samples (y data) Sum of squares of samples (y data) Sum of products of samples (x, y) Correlation coefficient Coefficient of regression equation (y=a+bx) Coefficient of regression equation (y=a+bx)

Automatic Power Off Function

This calculator will turn itself off to save battery power if no key is pressed for approximately 10 minutes.

#### SPECIFICATIONS

Calculations: Scientific calculations, statistical calculations, etc. Internal calculations: Mantissas of up to 12 digits Pending operations: 16 calculations 8 numeric values (4 numeric values in STAT mode) Power source: 3V (DC): [EL-509V/EL-531V] Alkaline batteries (LR44) 2 [EL-509VH/EL-531VH] Heavy duty manganese batteries (size AA or R6) 2 Power consumption: 0.0006 W Operating time: [EL-509V/EL-531V] Approx. 2500 hours [EL-509VH/EL-531VH] Approx. 15000 hours when continuously displaying 55555. at 25C (77F). Varies according to use and other factors. Operating temperature: 0C 40C (32F 104F) External dimensions: [EL-509V/EL-531V] 78.6 mm (W) 152 mm (D) 10.5 mm (H) 3-3/32 (W) 5-31/32 (D) 13/32 (H) [EL-509VH/EL-531VH] 78.6 mm (W) 166 mm (D) 19.5 mm (H) 3-3/32 (W) 6-17/32 (D) 25/32 (H) Weight: [EL-509V/EL-531V] Approx. 75 g (0.166 lb) (Including batteries) [EL-509VH/EL-531VH] Approx. 115 g (0.254 lb) (Including batteries) Accessories: Batteries 2 (installed), operation manual, operation examples sheet, quick reference card and hard case

: Appears when statistics mode is selected. : Indicates that a numerical value is stored in the independent memory.

In the constant calculations, the addend becomes a constant. Subtraction and division are performed in the same manner. For multiplication, the multiplicand becomes a constant. When performing calculations using constants, constants will be displayed as K.

Entered data are kept in memory until @ c or @ m 1 (2) are pressed. Before entering new data, clear the memory contents. [Data Entry] Single-variable data Data k Data & frequency k (To enter multiples of the same data) Two-variable data Data x & Data y k Data x & Data y & frequency k (To enter multiples of the same data x and y.) [Data Correction] Correction prior to pressing k: Delete incorrect data with. Correction after pressing k: Press > to confirm the latest entry and press @ J to delete it.

#### Functions

BEFORE USING THE CALCULATOR Key Notation Used in this Manual

In this manual, key operations are described as follows: e

Refer to the operation examples of each function. Before starting calculations, specify the angular unit. The results of inverse trigonometric functions are displayed within the following range: = sin1 x, = tan1 x

#### DEG RAD GRAD

= cos1 x

#### 0 0 200

To specify e : To specify ln : To specify x :

#### @e I @KX

100 100

#### 90 90

Functions that are printed in orange above the key require @ to be pressed first before the key. When you specify the memory, press @K first. Numbers are not shown as keys, but as ordinary numbers.

#### Random Numbers

A pseudo-random number with three significant digits can be generated by pressing @ ` =. To generate the next random number, press =. You can perform this function in the normal and statistics modes. Random numbers use memory Y. Each random number is generated on the basis of the value stored in memory Y (pseudo-random number series).

Statistical Calculation Formulas

#### Power On and Off

Press to turn the calculator on, and @F to turn it off.

#### Clearing Methods

There are three clearing methods as follows: Clearing operation @c RESET : Clear : Retain *1 Independent memory M. *2 Temporary memories A-D, X and Y, statistical data, and last answer memory. Entry (Display) M*1 A-D, X,Y*2 STAT, ANS

Refer also to the operation examples sheet. In the statistical calculation formulas, an error will occur when: the absolute value of the intermediate result or calculation result is equal to or greater than 1 10100. the denominator is zero. an attempt is made to take the square root of a negative number.

#### Angular Unit Conversions

(5) ERROR AND CALCULATION RANGES Errors

An error will occur if an operation exceeds the calculation ranges, or if a mathematically illegal operation is attempted. When an error occurs, pressing < (or >) automatically moves the cursor back to the place in the equation where the error occurred. Edit the equation or press to clear the equation.

Each time @ g are pressed, the angular unit changes in sequence.

#### Memory Calculations

This calculator has 6 temporary memories (A-D, X and Y), one independent memory (M) and one last answer memory. Independent memory and temporary memories are only available in the normal mode. [Temporary memories (A-D, X and Y)] A stored value can be recalled as a value or variable for the use in equations. In case you store an infinite decimal in the memory, recall it as a variable to obtain accurate answers. Ex.) 1/3OY 3*RY= 3*@KY= (0.3333.is stored to Y)

FOR MORE INFORMATION ABOUT THIS CALCULATOR

Visit our Web site. http://sharp-world.com/calculator/

Error Codes and Error Types

#### Syntax error (Error 1):

An attempt was made to perform an invalid operation. Ex. 2 @{ Calculation error (Error 2): The absolute value of an intermediate or final calculation result equals or exceeds 10100. An attempt was made to divide by 0. The calculation ranges were exceeded while performing calculations. Depth error (Error 3): The available number of buffers was exceeded. (There are 8 buffers* for numeric values and 16 buffers for calculation instructions). *4 buffers in STAT mode. Equation too long (Error 4): The equation exceeded its maximum input buffer (142 characters). An equation must be shorter than 142 characters.

#### Editing the Equation

Press < or > to move the cursor. You can also return to the equation after getting an answer by pressing > (<). See below for Multi-line playback function. If you need to delete a number, move the cursor to the number you wish to delete then press d. The number under the cursor will be deleted. If you need to insert a number, move the cursor to the place immediately after where you wish to insert the number then enter the number.

#### 0.999999999 1.

[Independent memory (M)] In addition to all the features of temporary memories, a value can be added to or subtracted from an existing memory value. [Last answer memory (ANS)] The calculation result obtained by pressing = or any other calculation ending instruction is automatically stored in the last answer memory. Note: Calculation results from the functions indicated below are automatically stored in memories X or Y. For this reason, when using these functions, be careful with the use of memories X and Y. Random numbers. Y memory r, xy. X memory, Y memory Temporary memories and last answer memory are cleared even when the same mode is reselected.

Multi-line Playback function

This calculator is equipped with a function to recall previous equations. Equations also include calculation ending instructions such as = and a maximum of 142 characters can be stored in memory. When the memory is full, stored equations are deleted in the order of the oldest first. Pressing [ will display the previous equation and the answer. Further pressing [ will display preceding equations (after returning to the previous equation, press ] to view equations in order). In addition, @[ can be used to jump to the oldest equation.

#### Calculation Ranges

Refer also to the operation examples sheet. Within the ranges specified, this calculator is accurate to 1 in the least significant digit of the mantissa. When performing continuous calculations (including chain calculations), errors accumulate leading to reduced accuracy.

EL-509V(H)/531V(H) (K0424T)_ENGLISH_1

#### 9 0. , 9 0. , 9 0. ,

MODEL NO: SHARP EL-531VH or EL-531RH (ADVANCED D.A.L) STEP ONE: Select the statistics mode. Select MODE, this is done by pressing 2ndF followed by the DRG button and then select option 1 which is STATX. The modes are generally written on the top of the calculator. Make sure STAT x is on the screen. STEP TWO: Input the Data The simplest case is one variable. To input 3, 5, 4, 7, 1 you must do the following: 3[M+] 5[M+] 4[M+] 7[M+] 1[M+] Each time you enter a unit of data the calculator shows the count of the data entered so far. So if youve done the above, your calculator should show 5 or n=5. STEP THREE: Statistical Calculations x is the sample mean: [RCL] [4] xn the population standard deviation: [RCL] [6] xn1 the sample standard deviation: [RCL] [5] x2 the sum of squares of the sample data: [RCL] [+/-] x the sum of the sample data: [RCL] [.] n the number of items in the sample: [RCL] [0] STEP FOUR: Clearing the Data In order to start calculations on a new dataset the current memory must be cleared by selecting CA. This is done by pressing SHIFT and then DEL. STEP FIVE: Getting out of STAT Mode This is done by selecting 2ndF, MODE and then option 0 on the calculator which is NORMAL. Try the following: Try to get the mean and standard deviation of 37.75, 38, 37, 38.5, and 37.5. You should get a mean of 37.75 and a standard deviation of 0.5.

MODEL NO: SHARP EL-506W or EL-546W or EL-531W STEP ONE: Select the statistics mode. This is done by pressing the MODE button, selecting STAT which is option 1 and then select SD which is option 0 on this calculator.

STEP TWO: Input the Data The simplest case is one variable. To input 3, 5, 4, 7, 1 you must do the following: 3[M+] 5[M+] 4[M+] 7[M+] 1[M+] Each time you enter a unit of data the calculator shows the count of the data entered so far. So if youve done the above, your calculator should show 5 or n=5. STEP THREE: Statistical Calculations x is the sample mean: [RCL] [4] xn the population standard deviation: [RCL] [6] xn1 the sample standard deviation: [RCL] [5] x2 the sum of squares of the sample data: [RCL] [+/-] x the sum of the sample data: [RCL] [.] n the number of items in the sample: [RCL] [0] STEP FOUR: Clearing the Data In order to start calculations on a new dataset the current memory must be cleared by selecting CA. This is done by pressing SHIFT and then DEL. STEP FIVE: Getting out of STAT Mode This is done by selecting 2ndF, MODE and then option 0 on the calculator which is NORMAL. Try the following: Try to get the mean and standard deviation of 37.75, 38, 37, 38.5, and 37.5. You should get a mean of 37.75 and a standard deviation of 0.5.

MODEL NO: CASIO fx-83 WA STEP ONE: Select the statistics mode. This is done by pressing the MODE button and selecting SD which is option 2 on this calculator. STEP TWO: Input the Data The simplest case is one variable. To input 3, 5, 4, 7, 1 you must do the following: 3[M+] 5[M+] 4[M+] 7[M+] 1[M+] STEP THREE: Statistical Calculations x is the sample mean: [SHIFT] [1] [=] xn the population standard deviation: [SHIFT] [2] [=] xn1 the sample standard deviation: [SHIFT] [3] [=] x2 the sum of squares of the sample data: [ALPHA] [(-)] [=] x the sum of the sample data: [ALPHA] [ ,,,] [=] n the number of items in the sample: [ALPHA] [hyp] STEP FOUR: Clearing the Data In order to start calculations on a new dataset the current memory must be cleared. This is done by pressing ALPHA, then MCL and nally =. STEP FIVE: Getting out of STAT Mode This is done by selecting MODE and then COMP which is option 1. Try the following: Try to get the mean and standard deviation of 37.75, 38, 37, 38.5, and 37.5. You should get a mean of 37.75 and a standard deviation of 0.5.

MODEL NO: CASIO fx-83 ES STEP ONE: Select the statistics mode. This is done by pressing the MODE button, then selecting STAT which is option 2 on this calculator and then 1-VAR which is option 1 on this calculator. STEP TWO: Input the Data The simplest case is one variable. To input 3, 5, 4, 7, 1 you must do the following: 3[=] 5[=] 4[=] 7[=] 1[=] STEP THREE: Statistical Calculations x is the sample mean: [AC] [SHIFT] [1] [5] [2] [=] xn the population standard deviation: [AC] [SHIFT] [1] [5] [3] [=] xn1 the sample standard deviation: [AC] [SHIFT] [1] [5] [4] [=] x2 the sum of squares of the sample data: [AC] [SHIFT] [1] [4] [1] [=] x the sum of the sample data:[AC] [SHIFT] [1] [4] [2] [=] n the number of items in the sample: [AC] [SHIFT] [1] [5] [1] [=] STEP FOUR: Clearing the Data In order to start calculations on a new dataset the current memory must be cleared. This is done by pressing SHIFT, then CLR which is 9 on the calculator then press MEMORY which is option 2, then press YES which is = and nally AC. STEP FIVE: Getting out of STAT Mode This is done by selecting MODE and then COMP which is option 1.

MODEL NO: CASIO fx-83MS or fx-85MS STEP ONE: Select the statistics mode. This is done by pressing the MODE button, then selecting SD which is option 2 on this calculator. STEP TWO: Input the Data The simplest case is one variable. To input 3, 5, 4, 7, 1 you must do the following: 3[=] 5[=] 4[=] 7[=] 1[=] STEP THREE: Statistical Calculations x is the sample mean: [AC] [SHIFT] [2] [1] [=] xn the population standard deviation: [AC] [SHIFT] [2] [2] [=] xn1 the sample standard deviation: [AC] [SHIFT] [2] [3] [=] x2 the sum of squares of the sample data: [AC] [SHIFT] [1] [1] [=] x the sum of the sample data:[AC] [SHIFT] [1] [2] [=] n the number of items in the sample: [AC] [SHIFT] [1] [3] [=] STEP FOUR: Clearing the Data In order to start calculations on a new dataset the current memory must be cleared. This is done by pressing SHIFT, then CLR, then SCL which is option 1 and nally =. STEP FIVE: Getting out of STAT Mode This is done by selecting MODE and then COMP which is option 1.

### Tags

BX1800
Black
SCX-7645P
Recording AMP
Darkness
BH-202
G-470
Easyshare C913
Intermatic T101
S350DL
167MT
0 Plus
RM250
CL-1 Nimh
XR-1300R
Display
PPD01
BDV-IT1000
Argos
Stratego 2002
60HP-2005
Rs 1500
EHD72100X
Tiger Hunt
H6300
85394
0 3
PRO1250
JBL L96
CQ-VD7005N
**Instructions**
Asus P2LB
TI-30X IIB
MC-808WAR
FE925N
PS400
EP15A
Gdvdr320hdmib
PSC 2410
RU-27FB31C
TEO-S125-2000
EW543F
JET-LAB 490
Premiere 6
DEH-2000MPB
LE32B650t2wxxc
Dynax 40
SPA400
LAV48380
MS 3200
Nuvi 370
PSR-215
Kxtg8521E
DR-4010C
F5D7230-4
Mazda 626
Guanti
DTR320-00
MG250DFX
SA7000C
IV-150
Enduro 8
Power 4
R-657
**User Manual**
DPF-V1000N
BX BW
DP2800
Roadnavigator RN10
Toughbook CF51
LE37A656
Pioneer A-C3
Anti-virus 2011
LXT410VP3
TF-DVD5000
Loader
HD103UJ Y
HF-310
Monitor 3313
GT-S3600
Braun 720
Blue Easy
CLP-315 ETS
10X-blackberry W-GM
MP3222
KX-TGA830RU
Nokia 2260
8000I
Printer
Kdpdr50J-KD-pdr50
WX-C570
Treo 750V
TD-C70145E
**Calculator Standard Deviation**
Nokia 6555
LW20M25CP
90-250MM
X10 Mini
BAR998HGN
E2316
Gpsmap 3206
DV4006
MD 7455

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

#### Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101