Contents

Trademarks Dear SHARP customer Important Safety Precautions Supplied accessories Quick guide Attaching the stand Setting the TV Inserting the batteries Using the remote control unit Cautions regarding the remote control unit Remote control unit TV (Front/Side view) TV (Rear view) Turning on the power Standby mode Turning off the power Initial auto installation (Analogue) Initial auto installation (DTV) Using external equipment Connecting a VCR Connecting a game console or camcorder Connecting a DVD player Connecting a decoder Connecting a PC Menu operations Common operations AV Mode Picture menu OPC Picture adjustments Advanced Audio menu Audio adjustments Sound Wide Power Control menu No Signal Off No Operation Off Power Management Setup menu Auto Installation Programme Setup Auto Search Manual Adjust Sort Erase Programme Child Lock Input Label Position PC Setup HDMI Audio Select HDMI Auto View
WSS (Wide Screen Signalling) 4:3 Mode Rotate Language Supply Voltage Option menu DNR (Digital Noise Reduction) Input Select Audio Only Colour System Useful features WIDE MODE Using the analogue programme list Freezing the image while watching Teletext function DTV menu operations DTV common operations About using the character set screen Language Programme Setup Installation Auto Installation Carrier Scan Carrier Setup System Setup OSD Setup Child Lock Accessories Version (Software version) Software Upgrade Common Interface Inserting a CA card Useful features (DTV) About EPG Using the EPG Using the EPG Timer Using the ESG Using the digital programme list Displaying subtitles Viewing a service banner Using the multi audio function Using the MHEG5 application (UK only) Appendix Troubleshooting RS-232C port specifications Specifications PC compatibility chart (EXT 5 only) End of life disposal

Trademarks

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. The HD ready Logo is a trademark of EICTA. The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project.

Dear SHARP customer

Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of troublefree operation of your product, please read the Important Safety Precautions carefully before using this product.
Important Safety Precautions
CleaningUnplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moistureDo not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock. StandDo not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturers instructions. Use only the mounting hardware recommended by the manufacturer. When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart. VentilationThe vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for builtin installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturers instructions are followed. The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass. Heat sourcesKeep the product away from heat sources such as radiators, heaters, stoves and other heatgenerating products (including amplifiers). To prevent fire, never place any type of candle or naked flames on the top or near the TV set. To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items. Do not display a still picture for a long time, as this could cause an afterimage to remain. There is power consumption always if main plug is connected. ServicingDo not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified person to perform servicing.

Due to the large variation in transmitted volume levels in RADIO mode, some stations will produce distortion if the volume level is set too high.
23 PC Directly select the PC terminal as an INPUT SOURCE. MENU Display the MENU screen. RETURN Return to the previous menu screen. Colour (Red/Green/Yellow/Blue) TELETEXT: Select a page. (See page 18.) DTV: The coloured buttons are used to select correspondingly to the coloured items in the menu screen. [ (Subtitle for Teletext) TV/External: To turn the subtitles on and off. DTV: Display the subtitle selection screen. (See page 24.) k (Reveal hidden Teletext) (See page 18.) v (Top/Bottom/Full) Switch the Teletext image to Top, Bottom or Full. 1 (Subpage) (See page 18.)

3 (Hold)

(See page 18.) SLEEP Set the sleep timer on (in units of 30 min. up to max. 2 hr. 30 min.) and off.
Using K on the remote control unit DTV mode: Press K to open the multi audio screen. (See page 24.) Analogue TV mode: Each time you press K, the mode switches as illustrated in the following tables.
NICAM TV broadcasts selection Signal Stereo Bilingual Selectable items NICAM STEREO, MONO NICAM CH A, NICAM CH B, NICAM CH AB, MONO NICAM MONO, MONO A2 TV broadcasts selection Signal Stereo Bilingual Monaural Monaural Selectable items STEREO, MONO CH A, CH B, CH AB MONO
* The volume can be individually set for the speaker and headphones output for each input (TV, DTV, EXT 1, EXT 2, EXT 3, EXT 4, EXT 5).

TV (Front/Side view)

a Power button MENU button b (Input Source) button P (r/s) (Channel buttons) i (e/f) (Volume buttons)
Operation without a remote control unit
TV control panel buttons OPC indicator B (Standby/On) indicator OPC sensor Remote control sensor b Pr Ps ik il Remote control buttons OK a b d c

TV (Rear view)

AC INPUT terminal
EXT 5 terminals COMMON INTERFACE slot EXT 4 (HDMI/AUDIO) terminals Headphone jack EXT 1 (RGB) terminal
Round lock for Kensington Security Standard slot
RS-232C terminal EXT 3 (Component) terminals
Antenna input terminal (DVB-T 5V=/80mA)

EXT 2 terminals

Only if you use an active terrestrial antenna, select On(5V) under Supply Voltage. (See page 16.)
Regarding the headphone jack
Use headphones with a stereo mini plug ( 3.5 mm). Be sure to unplug headphones from the jack when they are not in use. The speakers do not output volume when headphones are plugged in. You can set the volume to different levels for each input source. 6

WARNING:

Make sure that the volume is turned down before using or connecting earphones and headphones. Listen to audio at moderate levels. Excessive sound pressure from earphones and headphones can cause hearing loss.

Turning on the power

When the Power of the TV is OFF (B indicator is off), Press a on the TV.
The B indicator on the TV changes to green.

You do not need to do anything during the auto search.
The setup menu disappears and you can watch the programme on channel 1.
When the TV is in Standby ( B indicator is Red), Press B on the remote control unit.
The B indicator on the TV changes from red to green.
Initial auto installation (DTV)
Digital Video Broadcasting is a transmission scheme. It is much more than a simple replacement for existing analogue television transmission. DVB provides more stations, clearer picture quality and other services displayed on the screen. It also allows a range of new features and services including subtitles and multiple audio tracks. To watch DTV broadcasts, follow the procedures below to scan all available services in your area.

Standby mode

Press B on the remote control unit.
The TV enters standby mode and the image on the screen disappears. The B indicator on the TV changes from green to red.

Turning off the power

Press a on the TV.
The B indicator on the TV turns off. When the TV is turned off by a, you cannot turn on the power by pressing B on the remote control unit.
Press DTV or b to access the DTV mode. Press DTV MENU and the DTV Menu screen displays. Press c/d to select Installation. Press a/b to select Auto Installation, and then press OK. If you have already set the PIN, enter it here. If not, enter the factory preset PIN 1234.
See page 14 for setting PIN. A confirmation message displays. To start the search, select Yes.

Display status indicator

Off Red Green Power off The TV is in standby mode. The TV is on.
If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet. Weak electric power is still consumed even when a is turned off. In DTV input mode, if the power is turned off immediately after a setting change from the menu screen, the new setting or channel information may not be memorised.
The TV starts scanning all available DTV and radio services in your area.
The language and country settings used in this operation are the settings you have already set while executing the Initial auto installation (Analogue). If you want to reconfigure the country setting, for instance after moving to another country, conduct Auto Installation from the Setup menu again. The services are stored according to the channel number information embedded in the stream (if available). If the information is not available, the services are stored according to the order in which they were received. If you would like to sort the order, it is possible to arrange it as explained in page 20. To cancel the scan in progress, press END. You cannot select any DTV-related menu items unless Auto Installation has been completed.

Items marked * cannot be adjusted when PC Input (including HDMI-PC Input (see page 1)) is selected.

Picture menu

Adjust the picture of each AV MODE to your preference with the following picture settings (DYNAMIC(FIXED) cannot be adjusted).

Advanced

Menu Operation: B or C (page 9)

TV/DTV/AV only

This TV provides various advanced functions for optimising the picture quality.
DYNAMIC C. M. S.-Hue C. M. S.-Saturation C. M. S.-Value Colour Temp. R [ Y [ G [ C [ B [ M [ Reset 0] 0] 0] 0] 0] 0] + + + + + +

*1 *1 *2 *1

Film Mode 3D - Y/C Monochrome I/P Setting
Item marked *1 cannot be adjusted when EXT4 or EXT5 is selected in the INPUT SOURCE menu. Item marked *2 cannot be adjusted when PC input (including HDMI-PC Input (see page 1)) is selected.
G C. M. S. (Colour Management System)
Colour tone is managed using the six-colour adjustment setting. Item
C. M. S.-Hue: This is a standard to adjust the colour either more reddish or more bluish in tone. C. M. S.-Saturation: Increases or decreases the saturation of a selected colour. C. M. S.-Value: A higher value makes the image brighter. A lower value makes the image darker.

G I/P Setting

Adjust the image and input signal can give you a more beautiful picture. Item
Interlace: Display finely detailed images for TV or video, etc. Progressive: Display smooth images for still images or graphics, etc.

G Colour Temp.

Adjust the colour temperature to give the best white image. Item
High: White with bluish tone Mid-High: Intermediate tone between High and Middle Middle: Natural tone Mid-Low: Intermediate tone between Middle and Low Low: White with reddish tone

Audio menu

Audio DYNAMIC Treble Bass Balance Sound Wide Reset [ + 3] [ + 2] [ 0] L + + R

G Film Mode

Automatically detect a film-based source (originally encoded at 24/25 frames/second, depending on the vertical frequency), analyses it then recreates each still film frame for high-definition picture quality.

Audio adjustments

Repeat steps 1 to 4 in Programme Setup. Press a/b to select Yes, and then press OK. Press a/b/c/d to select the channel you want to erase, and then press OK. Press OK to erase the selected programme. All the subsequent programmes move up. Repeat steps 3 and 4 until all desired channels are erased.

Input Label

You can assign each input source a label you like.
Press b to select the desired input source. Press MENU and the MENU screen displays. Press c/d to select Setup. Press a/b to select Input Label, and then press OK. Press a/b to select characters and c/d to move to the desired digit to label the input source.
When you want to change the input label to the default name, select CLEAR on the Input Label screen.

Child Lock

Allows you to use a PIN to protect certain settings from being accidentally changed.

Changing the PIN

Press MENU and the MENU screen displays. Press c/d to select Setup. Press a/b to select Child Lock, and then press OK. If you have already set the PIN under Child Lock, enter it here.
Repeat step 5 above until the name is fully spelt out, and then press OK.
The name can be 6 characters or less. When you want to set an input source name of less than 6 characters, press MENU to exit from the labelling menu.
You cannot change the label if the input source is TV or DTV.

Change PIN Reset New PIN

Reconfirm

Position

Menu Operation: C (page 9)
Press a/b to select Change PIN, and enter the 4-digit number as a PIN using 09. Enter the same 4-digit number as in step 4 to confirm.
When setting the PIN, Reset in the Menu will be selectable and operational.
For adjusting a pictures horizontal and vertical position. Item
H-Pos.: Centres the image by moving it to the left or right. V-Pos.: Centres the image by moving it up or down.
To view a locked channel (Lock setting in Programme Setup Manual Adjust is set to On), you must enter a PIN. (See page 13 and page 19 for locking channels from viewing in analogue TV and DTV mode.) When you select a locked channel, a PIN prompt message pops up. Press OK to display the PIN input window.
Adjustments are stored separately according to input source. Depending on the input signal type a position setting may not be available.

PC Setup

For adjusting a PC image.
Only H-Pos. and V-Pos. in Fine Sync. are available when the HDMI-PC input (see page 1) is selected.

HDMI Audio Select

Menu Operation: A (page 9) Select Digital for audio signal via the HDMI terminal. Select Analogue for audio signal via the AUDIO jack. NOTE

Option DNR Input Select Audio Only Colour System
DNR (Digital Noise Reduction)
Produce a clearer image. (Off, High, Low)
This function is available when TV, DTV, EXT1, EXT2 or EXT3 is selected in the INPUT SOURCE menu.

Useful features

WIDE MODE
You can select the picture size.
You can select the picture size. Selectable picture size varies with the type of signal received. Item (for SD (Standard-Definition) signal)
Normal: For 4:3 standard pictures. A side bar appears on each side. Zoom 14:9: For 14:9 letterbox pictures. A thin side bar appears on each side, and you may see bars on the top and bottom with some programmes. Panorama: In this mode the picture is progressively stretched toward each side of the screen. Full: For 16:9 squeeze pictures. Cinema 16:9: For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Cinema 14:9: For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

Press f.

The WIDE MODE menu displays.
Press f or a/b to select a desired item on the menu.
Can also be adjustable when the HDMI-PC input (see page 1) is selected. Connect the PC before making adjustments. (See page 9.) Selectable picture size may vary with input signal type.
Normal: Keeps the original aspect ratio by filling the screen up to the top and bottom. Full: An image fully fills the screen. Dot by Dot: Detects the resolution of the signal and displays an image with the same number of pixels on the screen.
Item (for HD (High-Definition) signal)
Full: Display with the Overscan image. Crop all sides of screen.

G Manual Selection

Using the analogue programme list
You can also select the desired channel from programme list instead of using 09 numeric buttons or P (r/s). rs
The WIDE MODE menu displays. The menu lists the wide mode options selectable for the type of video signal currently received.
Press f or a/b while the WIDE MODE menu displays on the screen.
As you toggle down the options, each is immediately reflected on the screen. No need to press OK.

G Auto Selection

If you set WSS and 4:3 Mode in the Setup menu on page 15, the optimum WIDE MODE is automatically chosen for every broadcast, VCR or DVD containing the WSS information.
Press OK when no other menu screen is displayed. (Except when an external input source is selected.) Press a/b to select the desired channel to tune in, and then press OK.
Freezing the image while watching
Allows you to capture and freeze one frame from a moving image that you are watching.

DTV menu operations

DTV common operations
DTV menu screen 4 Press DTV or b to access the DTV mode. Press DTV MENU and the DTV Menu screen displays. Press c/d to select the desired menu, and then press OK if necessary.
From this point, menu operations differ depending on the item you are going to adjust. See the respective section of the menu operation. You cannot select any DTV-related menu items unless Auto Installation has been completed. Press RADIO to switch between DTV and Radio mode. To exit the current screen without saving the change, press END.
To customise the language preference for audio and MHEG5 application.
To configure various settings for each service.

Installation

To scan all services available in your area, or to label/ erase/re-scan the selected carrier.
E DTV common menu operation

System Setup

To configure On-Screen Display and Child Lock settings.

Accessories

To display the current version of the software or to allow the software upgrade to take place.

Common Interface

To display the current Common Interface details.
About using the character set screen
In some cases you may be prompted to enter characters. See below for details. Sample Alpha Numerical Character Set screen 1 2
+ 6 A L W b m x FAV ! , 7 B M X c n y ~ 8 C N Y d o z Select

0.9 OK END

Configure various settings for each service. Press the preassigned 19 numeric buttons to access each of the functions explained below.
Press OK while the cursor is on Programme Setup. Press a/b to select the desired service.

#. 9 D O Z e p

$ / ; E P [ f q

% 0 : F Q \ g r

& 1 < G R ] h s

2 _ H S ^ i t

( 3 > I T ` j u

) 4 ? J U = k v

* 5 @ K V a l w
Press 19 on the remote control to select the functions below. Sample Programme Setup screen
S.No Services BBC BBC News BBC 1 BBC 2 Fav 1 Lock Skip Erase Move

6 Input area Space

1. 3. 5. 7. 9.

Fav Move Skip Erase View

2. 4. 6. 8.
Lock Move To Select Label
To add or overwrite with a space.
Character select area YELLOW (Select) button
Press to move between the input area and character select area.
The picture window shows a blank image if Radio services are listed.

a/b/c/d button

Press to move the cursor.

G Favourite

Assign services to 4 different favourite groups.

OK button

While in the input area: Confirms the new name. While in the character select area: Confirms the input of a character.
Press 1 on the remote control. A selection box displays. Press a/b to register the selected service to any of the 4 favourite groups (None, Fav 1. Fav 4) and then press OK. An icon displays indicating the favourite status.

Press OK to register the change.

EXAMPLE:

Moving 002 ZDF ahead of 001 ARD. Default order: Press a/b to select the desired service in 001rs002rs003rs004. Sorted order: Press a/b to select the desired service in 002rs001rs003rs004.
ARD ZDF SAT. 1 RTL 002 ZDF ARD SAT. 1 RTL

G Erase

Erase the selected service(s) from the memory.
Press 7 on the remote control. An icon displays indicating the service to be erased.
Pressing 7 will turn the erase icon on and off. Do not press END to exit the screen here if you wish to register the change.
A confirmation message displays.

G Move To

Use this function to change the position of two selected services.
Press c/d to select Yes, and then press OK.

G Label

Change individual service names.
Press 4 on the remote control. Enter the number you want to change to using 09 numeric buttons, and then press OK. The positions of the selected services are switched.
Do not press END to exit the screen here if you wish to register the change. You cannot enter a service number that is not listed.
Press 8 on the remote control. A character set screen displays. Enter new name for the service. See page 19 for operations using the character set screen.

G View

Tune to the service shown in the picture window.
Press OK again, the message Successfully updated displays. The change is now registered.
ZDF ARD SAT. 1 RTL 001 RTL ARD SAT. 1 ZDF
Press 9 on the remote control.
The image shown in the picture window changes.
Press END to exit the Programme Setup screen to view the image in full screen.

G Skip

Services that are set to skip will not be picked up when pressing P (s/r).
This section describes how to reconfigure the DTV settings after conducting Initial auto installation (DTV) on page 7.
Press 5 on the remote control. An icon displays indicating the service to be skipped.
Pressing 5 will turn the skip icon on and off. Do not press END to exit the screen here if you wish to register the change.
The TV automatically detects and stores all available services in your area. See Initial auto installation (DTV) on page 7 for details. NOTE

To view paid TV broadcasting, you need to make a contract with a service provider. Please contact a service provider for details.
Do not disconnect the AC cord when the software upgrade is in progress, as this may cause the upgrade to fail. If problem arises ask a qualified service personnel before the software upgrade period expires.

Useful features (DTV)

About EPG
With the Electronic Programme Guide (EPG), you can check the schedule of DTV and Radio events, view detailed information about them, tune to an event currently on-air and set a timer for future events. General EPG screen 1 2
070 BBC News The Bold and Beautiful 16/04/2005

Using the EPG Timer

When the Timer is set, the TV automatically tunes to a preset TV event when its on-air time begins.
Press EPG. Press a/b/c/d to select the desired event to be preset from the Event name list, and then press OK (OK/Timer).
Select an event not yet started.

07:00 07:30 ***

Services BBC News The B *** *** *** *** *** 07:00 *** *** *** *** *** 08:00 *** *** *** *** 09:00
Press RED (Timer Mode), and then press a/b to select the desired parameter (Once, Daily, Weekly, or Monthly), and then press OK.
Once set, the preset event is indicated with an orange background in the EPG event name list. To cancel the preset, select the event and press GREEN (Delete Timer).
S.No Service name BBC News Mode Once Once Daily Weekly Monthly Date Time Duration

BBC 1 BBC 2 CBBC Channel

Service name Event name * Programme information Picture window Service list

04/11/05 07:00 00:30

This function cannot be set for locked services or when Child Lock applies. (See pages 19 and 21.) Up to 8 events can be preset using the Timer function. If you are watching another event, an alarm message displays on the screen a few seconds before the preset time. The TV power may not come on for several seconds if you preset an event using the EPG Timer and if the AC cord has been disconnected. When you set the EPG Timer, the power consumption during the standby mode will be higher (16 W or more) than normal. You can reduce the power consumption by turning off the TV or removing the AC cord, but the EPG Timer will not operate in this case.
Shows the list of all services currently available.

Event name list

Shows the names of current events in a grid of rows and columns. You can check scheduled event information up to several days ahead, depending on conditions. If a received programme does not contain a name, either No event name or a blank space will be displayed. However, the programme can still be watched.

Using the EPG

Press EPG.
Pressing RADIO will switch between DTV and Radio mode.
G When using the EPG Timer for recording:
Make sure to set the timer of your recording equipment as well. Do not switch channels while recording. If the TV is in standby mode when the preset on-air time nears, it will output signals for recording without displaying images on the screen.
Press a/b/c/d to access the desired service or event.
There is a slight lag from the time of the a/b/c/d operations to the time the Programme information and Picture window display is affected. The image shown in the picture window changes.
In the Service list: 1 Press a/b to scroll the page up/down. Or, 2 Press RED (Page l) or GREEN (Page k) to skip to the previous/next page in one step. In the Event name list: 1 Press c/d to scroll the page left/right. Or, 2 Press YELLOW (Prev. Day) or BLUE (Next Day) to skip to the previous/next day in one step.

Using the ESG

The Electronic Service Guide (ESG) is a simplified version of EPG, giving you only essential information of current events for faster access.

Press ESG.

The ESG screen displays.
Press a/b to select a desired service, and then press OK.
The TV will show the image in full screen.
To watch an event currently on-air, press OK (OK/ Timer).
The TV will show the image in full screen. Selecting an event that has not yet started will activate the EPG Timer mode instead.
Basic operation procedures are similar to EPG operations. ESG does not provide information about future events, or access to Timer function.
Pressing p opens the EPG Description screen that provides more
information about the selected event. Press p or END to exit.
Using the digital programme list
Select services by using the Programme List instead of using 09 numeric buttons or P (s/r).

Service banner

BBC 1 07:00 08:00 Business news

E R TYUI O

1 BBC 07:45 04/11/2005 MHEG
Press OK when no other menu screen is displayed. (Except when an external input source is selected.)
Fav Type S.No Services CBBC Channel BBC News BBC 1 BBC 2 Canal + UK Gold Carrier Freq FFT GI QAM BBC 538000 kHz 8K 1/All

Viewing a service banner

A service banner shows event names, start/end time of event, and other useful information.

Press p.

Appendix

Troubleshooting

Problem

No power.

Possible Solution
Check if you pressed B on the remote control unit. (See page 7.) If the indicator on the TV lights up red, press B. Is the AC cord disconnected? (See page 3.) Check if you pressed a on the TV. (See page 7.) External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after first turning the power off, or unplugging the AC cord and re-plugging it in after 1 or 2 minutes. Are batteries inserted with polarity (e, f) aligned? (See page 4.) Are batteries worn out? (Replace with new batteries.) Are you using it under strong or fluorescent lighting? Is a fluorescent light illuminated to remote control sensor?

Unit cannot be operated.

Remote control unit does not operate.

Picture is cut off.

Is the image position correct? (See page 14.) Are screen mode adjustments (4:3 Mode/WSS) such as picture size made correctly? (See pages 15 and 17.) Adjust the picture tone. (See pages 10 and 11.) Is the room too bright? The picture may look dark in a room that is too bright. Check the colour system setting. (See pages 13 and 16.) The units internal temperature has increased. Remove any objects blocking vent or clean. Check the power control setting. (See page 12.) Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off. Is connection to other components correct? (See pages 8 and 9.) Is input signal type selected correctly after connection? (See page 16.) Is the correct input source selected? (See page 8.) Is non-compatible signal being input? (See page 27.) Is picture adjustment correct? (See pages 10 and 11.) Is the antenna connected properly? (See page 3.) Is On selected in Audio Only? (See page 16.)
Strange colour, light colour, or dark, or colour misalignment. Power is suddenly turned off.

No picture.

No sound.
Is the volume too low? (See pages 5 and 6.) Make sure that headphones are not connected. (See page 6.) Check if you pressed e on the remote control unit. (See page 5.) Check if Monochrome is set to On. If so, set it to Off. (See page 11.)
The DTV menu screen is displayed in monochrome and hard to select the item.
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction. Storage temperature: 20C to e60C.

Rating table for Child Lock
Broadcasted rating Useradjusted rating

AGE 18

Universal Parental X-rated

X-rated

Universal

Parental

LCD COLOUR TELEVISION LCD-FARBFERNSEHGERT TLVISEUR COULEUR CRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIN EN COLOR LCD OPERATION MANUAL BEDIENUNGSANLEITUNG MODE DEMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO
Printed on environmentally friendly paper Auf kologischem Papier gedruckt Imprim sur papier cologique Stampato su carta ecologica Afgedrukt op ecologisch papier Impreso en papel ecolgico
Printed in Spain Gedruckt in Spanien Imprim en Espagne Stampato in Spagna Gedrukt in Spanje Impreso en Espaa

TINS-D222WJZZ

08P06-SP-NG

ESPAOL

NEDERLANDS

ITALIANO

FRANAIS

DEUTSCH

LC-19D1E LC-19D1S
D222WJZZ OPERATION MANUAL / BEDIENUNGSANLEITUNG / MODE DEMPLOI / MANUALE DI ISTRUZIONI / GEBRUIKSAANWIJZING / MANUAL DE MANEJO

ENGLISH

LC-19D1E/LC-19D1S

462.0 (462,0)

75.0 68.2 (68,2) (75,0) 49.0 (49,0)

411.8 (411,8)

360.0 (360,0) 320.0 (320,0)

232.4 (232,4)

218.0 (218,0)

40.0 (40,0)

240.0 (240,0)

196.0 (196,0)

DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. Before replacing the plug cover make sure that: If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires. IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

100.0 (100,0)

SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type.

2.5 10.0 (2,5) (10,0)

17.5 (17,5)

MODE DEMPLOI

TV/AV uniquement TV/DTV/AV uniquement TV uniquement PC uniquement
Les illustrations et lOSD (On-Screen Display = affichages lcran) dans ce mode demploi sont fournis titre explicatif et peuvent tre lgrement diffrents des oprations relles. Les abrviations (-BK, -WH, etc.) la fin du nom du modle reprsentent la couleur du coffret du tlviseur. : ces icnes que vous trouverez tout au long de ce mode demploi indiquent quune rubrique du menu peut tre rgle ou ajuste uniquement dans le mode dentre slectionn. PC uniquement fait rfrence la prise EXT 5 d'entre PC et ne comprend pas l'entre PC (entre PC HDMI) sur la prise EXT 4 (HDMI). PC HDMI : Entre PC (RVB) sur la prise EXT 4 (HDMI). L'entre PC HDMI est compatible avec VGA.

Table des matires

Marques Cher client SHARP Prcautions de Scurit Importantes Accessoires fournis Guide rapide Pose du socle Mise en place du tlviseur Insertion des piles Utilisation de la tlcommande Prcautions sur la tlcommande Tlcommande Tlviseur (Vue frontale/latrale) Tlviseur (Vue de dos) Mise sous tension Mode dattente Mise hors tension Auto installation initiale (Analogue) Auto installation initiale (DTV) Utilisation dappareils externes Raccordement dun magntoscope Raccordement dune console de jeu ou dun camscope Raccordement dun lecteur DVD Raccordement dun dcodeur Raccordement dun ordinateur Oprations du menu Oprations courantes MODE AV Menu Image OPC Rglages de limage Avanc Menu Audio Rglages audio Son tendu Menu Commande alimentation Aucun sgn arrt Pas dop. arrt Gestion alim. Menu Installation Autoinstallation Installation programme Recherche auto Rglage manuel Tri Effacer chane Verrouil. Enfant Etiquet. dentre Position Installation PC Slect. Audio HDMI Visionnement auto HDMI WSS (Signalisation Grand cran) Mode 4:3 Rotation Langue Tension alim. Menu Options Rduction bruit (Rduction numrique des parasites) Slection dentre Audio seul Syst. Couleur Fonctions pratiques Mode Gr. cran Utilisation de la liste des programmes analogues Arrt sur image pendant le visionnement Fonction Tltexte Oprations du menu DTV Oprations DTV communes A propos de lcran Srie de caractres Langue Configuration programme Installation Autoinstallation Balayage oprateur Configuration oprateur Configuration systme Configuration OSD Verrouil. Enfant Accessoires Version (Version du logiciel) Mise niveau du logiciel Interface commune Insertion dune carte CA Fonctions pratiques (DTV) A propos dEPG Utilisation de EPG Utilisation de la minuterie EPG Utilisation de ESG Utilisation de la liste des programmes numriques Affichage des sous-titres Consultation dune bannire de service Utilisation de la fonction multiaudio Utilisation de lapplication MHEG5 (Royaume-Uni uniquement) Annexe Guide de dpannage Spcifications du port RS-232C Fiche technique Tableau des ordinateurs compatibles (EXT 5 uniquement) Mise au rebut en fin de vie 28