Reviews & Opinions
Independent and trusted. Read before buy Sharp LC-26D44E!

Sharp LC-26D44E Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sharp LC-26D44e TV, size: 4.1 MB
Related manuals
Sharp LC-26D44e Annexe 1

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Sharp LC-26D44EAbout Sharp LC-26D44E
Here you can find all about Sharp LC-26D44E like manual and other informations. For example: review.

Sharp LC-26D44E manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sharp LC-26D44E please write about it to help other people.
[ Report abuse or wrong photo | Share your Sharp LC-26D44E photo ]

User reviews and opinions

Comments to date: 7. Page 1 of 1. Average Rating:
spartagirl 3:00pm on Tuesday, September 21st, 2010 
One of the greatest buys of my life, bought it on 09/15/08 and had no problems with it at all, they say its 720p but it works in 1080p.
paulprogrammer 5:07am on Monday, August 30th, 2010 
Sharp picture with Sharp The reason I purchased the Sharp tv was due the good report on the Gadget show. Good TV but MAJOR problems After having this TV for 8 months , with no problems --- All good and a good all round TV . GREAT BUY We originally bought this tv as a second for our bedrom. A little luxurious I know!
PaulDriver 4:50pm on Sunday, August 15th, 2010 
This TV is our first flat panel display after our ancient (but high-end) JVC 27" finally bit the bullet.
sepr0062 11:27pm on Saturday, August 7th, 2010 
It breaks every 3-6 months, remote stops bein...  none to speak of It breaks every 3-6 months, remote stops being recognized by TV.
puposet 5:55pm on Tuesday, August 3rd, 2010 
I just returned the second one in three months. The quality control at Sharp must be non-existant. The first one was faulty out of the box.
oherator399 2:19am on Tuesday, May 25th, 2010 
First , I choose this product because it was in my price range (600-700 $) and also quality range too .
BrainChemistry 11:30am on Tuesday, May 11th, 2010 
Best "True Image" Television for the Money I have owned this Sharp Aquos 32-inch LCD TV for over half a year, and I continue to be impressed with it.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




A2 TV broadcasts selection
NOTE When no signal is input, the sound mode will display MONO.

LC-26D44E-gb.indd 6

2008/02/19 10:21:20

TV (Front view)

B (Standby/On) indicator

TV (Rear view)

i (l/k) (Volume buttons) a (Power button) MENU button b (Input button)
P (s/r) (Programme [channel] buttons)
RS-232C terminal EXT 4 (ANALOGUE RGB/AUDIO) terminals EXT 5 (COMPONENT) terminals EXT 1 (RGB) terminal EXT 2 (RGB) terminal
Antenna input terminal (DVB-T 5V=/80 mA) 7 OUTPUT (AUDIO) terminals 8 EXT 6 (HDMI/AUDIO) terminals 9 EXT 7 (HDMI) terminal 10 COMMON INTERFACE slot 6
11 EXT 3 terminals 12 Headphone jack 13 AC INPUT terminal
NOTE Only if you use an active terrestrial antenna, select On (5V) under Supply Voltage. (See page 18.)

LC-26D44E-gb.indd 7

Turning on the power
Press a on the TV or B on the remote control unit.
Using the analogue programme list
You can also select the desired channel from programme list instead of using 0-9 numeric buttons or P (r/s).

Standby mode

Press B on the remote control unit when the TV is on.
The TV enters standby mode and the image on the screen disappears. The B indicator on the TV changes from green to red. To completely turn off the power to the TV, unplug the AC cord from the AC outlet. However, do not unplug the AC cord unless otherwise instructed.
Press OK when no other menu screen is displayed. (Except external input.) Press a/b to select the desired channel to tune in, and then press OK. Press END to exit the Programme List.
Initial auto installation (DTV)
Digital Video Broadcasting is a transmission scheme. It is much more than a simple replacement for existing analogue television transmission. DVB provides more stations, clearer picture quality and other services displayed on the screen. It also allows a range of new features and services including subtitles and multiple audio tracks. To watch DTV broadcasts, follow the procedures below to scan all available services in your area.

Display status indicator

Off Red Green Power off. The TV is in standby mode. The TV is on.
NOTE If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet. Weak electric power is still consumed even when a is turned off. In DTV input mode, if the power is turned off immediately after a setting change from the menu screen, the new setting or channel information may not be memorised.

This indicates the item currently selected.

Item in brackets

This indicates the current setting for the item.
Item with 4 displayed in grey
This indicates the item cannot be selected for various reasons.
NOTE Menu options differ in the selected input modes, but the operating procedures are the same. The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.
Press to open or close the menu screen. Press to select a desired item on the screen or adjust a selected item. Press to go to the next step or complete the setting. Press to return to the previous step. Press to open or close the DTV Menu screen. Press to exit the menu item.
Operation without a remote control
This function is useful when there is no remote control within your reach.
Press MENU briefly to display the direct control screen. Press P (s/r) instead of a/b or i k/l instead of c/d to select the item. Press b to complete the setting.
NOTE The direct control menu screen will disappear if left unattended for several seconds.

LC-26D44E-gb.indd 11

2008/02/19 10:21:27

Common operations

Menu Operation: A 3 Press MENU and the MENU screen displays. Press c/d to select the desired menu. Press a/b to select the desired menu item, and then press OK (Example: AV Mode, etc.).
Select Reset to reset all adjustment items to the factory preset values.
[Picture] Audio [STANDARD] [+6] [+30] +8 +40 +30 +30 +30 +10
Menu Operation: B Press MENU and the MENU screen displays. Press c/d to select the desired menu. Press a/b to select the desired menu item (Example: Backlight, Contrast, etc.). Press c/d to adjust the item to your desired position.
[Picture. Backlight] Audio [STANDARD] [+6] [+30] +8 +40 +30 +30 +30 +10
Picture AV Mode Backlight Contrast
Brightness [0] Colour Tint [0] [0]
Sharpness [0] Advanced Reset
Press a/b/c/d to select the desired item, and then press OK.

Menu Operation: C

Enter the 4-digit number as a PIN using 0 9. Enter the same 4-digit number as in step 4 to confirm.
The system PIN has been changed successfully displays.
NOTE To view a locked channel, you must enter a PIN. (See this page and page 27 for locking channels from viewing in analogue TV and DTV mode.) When you select a locked channel, a PIN prompt message pops up. Press OK to display the PIN input window.
Channel positions can be sorted freely.

Resetting the PIN

Allow you to reset your PIN to the factory preset 1234.
Repeat steps 1 to 4 in Programme Setup. Press c/d to select Yes, and then press OK. Press a/b/c/d to select the channel you want to move, and then press OK. Press a/b/c/d to move it to the desired position, and then press OK. Repeat steps 3 and 4 until all desired channels are sorted.
Repeat steps 1 to 3 in Changing the PIN. Enter the PIN. Press a/b to select Reset, and then press OK. Press c/d to select Yes, and then press OK.

Erase Programme

An individual programme can be erased.
NOTE As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach. See page 32 for resetting the current PIN to the factory preset 1234 if you lose or forget your PIN.
Repeat steps 1 to 4 in Programme Setup. Press c/d to select Yes, and then press OK. Press a/b/c/d to select the channel you want to erase, and then press OK.
A message screen pops up.

Input Label

You can assign each input source a label you like.
Press c/d to select Yes, and then press OK to erase the selected programme. All the subsequent programmes move up. Repeat steps 3 and 4 until all desired channels are erased.
Press b to select the desired input source. Press MENU and the MENU screen displays. Press c/d to select Setup. Press a/b to select Input Label, and then press OK. Press a/b/c/d to select each character of the new name for the input source, and then press OK. Repeat step 5 above until the name is fully spelt out, and then press OK.
The name can be 6 characters or less. If a label name is less than 6 characters, select END, then press OK.

Child Lock

Allows you to use a PIN to protect certain settings from being accidentally changed.

Changing the PIN

Press MENU and the MENU screen displays. Press c/d to select Setup. Press a/b to select Child Lock, and then press OK.

Change PIN Reset

NOTE You cannot change the label if the input source is TV or DTV.



LC-26D44E-gb.indd 17

2008/02/19 10:21:32


XGA Mode
Menu Operation: C (page 12) For adjusting a pictures horizontal and vertical position.
Item H-Pos.: Centres the image by moving it to the left or right. V-Pos.: Centres the image by moving it up or down. NOTE Adjustments are stored separately according to input source. Depending on the input signal type a position setting may not be available.
Menu Operation: C (page 12) You can select one of the 3 input signals listed below to adjust the picture resolution when the PC input is an XGA signal.

1024 g g g 768

NOTE Depending on the graphics card, resolutions of 1360 g 768 may not display correctly.
WSS (Wide Screen Signalling)


Menu Operation: A (page 12) You can select a language from the Setup menu. Select from among 13 languages. (Dutch, English, Finnish, French, German, Greek, Italian, Polish, Portuguese, Russian, Spanish, Swedish, Turkish)
Menu Operation: A (page 12) WSS allows a television to switch automatically among the different screen formats.
NOTE Use WIDE MODE if an image does not switch to the correct screen format. When the broadcast signal contains no WSS information, the function will not work even if enabled. (See page 20.)

Supply Voltage

4:3 Mode
Menu Operation: A (page 12) The WSS signal has 4:3 auto-switching that allows you to select between Normal and Panorama.
Item Normal: Normal range keeping 4:3 or 16:9 aspect ratio Panorama: Wide image without side bars
Menu Operation: A (page 12) Switch on or off the power to the antenna connected to the antenna input terminal. (See page 4.)

Option menu

[Option] Option Audio Only DNR Input Select [Off] [CVBS] [AUTO]
WSS signal 4:3 screen 4:3 mode Normal 4:3 mode Panorama

Colour System

NOTE HDMI Setup is displayed only when EXT6 or EXT7 is selected from the INPUT SOURCE menu.

Audio Only Fine Sync.

Menu Operation: C (page 12) Ordinarily, the TV automatically adjusts image positions coming from PC (Auto Sync. function). In some cases, however, manual adjustment is needed to optimise the image.
Item H-Pos.: Centres the image by moving it to the left or right. V-Pos.: Centres the image by moving it up or down. Clock: Adjusts when the image flickers with vertical stripes. Phase: Adjusts when characters have low contrast or when the image flickers. NOTE If you need to adjust the image position, adjust the position using your PC. 18

HDMI Setup items Signal Type*

Colour Matrix*

Dynamic Range*


Auto View


Audio Select**


NOTE Refer to your external equipment operation manual for the signal type. Items marked * may be greyed out (with 4) depending on the type of signal input from the external equipment. Item marked ** is only available when EXT6 is selected.

LC-26D44E-gb.indd 19

2008/02/19 10:21:33

Useful features

You can select the picture size.
You can select the picture size. Selectable picture size varies with the type of signal received.
Item (for SD (Standard) signal) Normal: For 4:3 standard pictures. A side bar appears on each side. Zoom 14:9: For 14:9 letterbox pictures. A thin side bar appears on each side, and you may see bars on the top and bottom with some programmes. Panorama: In this mode the picture is progressively stretched toward each side of the screen. Full: For 16:9 squeeze pictures. Cinema 16:9: For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Cinema 14:9: For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Item (for HD (High-Definition) signal) Full: Display with the Overscan image. Crop all sides of screen.

Press f.

The WIDE MODE menu displays.
Press f or a/b to select a desired item on the menu.
NOTE Connect the PC before making adjustments. (See page 10.) Selectable picture size may vary with input signal type.



Manual Selection

The WIDE MODE menu displays. The menu lists the wide mode options selectable for the type of video signal currently received.
Item Normal: Keeps the original aspect ratio in a full screen display. Full: An image fully fills the screen.
Press f or a/b while the WIDE MODE menu displays on the screen.
As you toggle down the options, each is immediately reflected on the screen. No need to press OK.

Auto Selection

If you set WSS and 4:3 Mode in the Setup menu on page 18, the optimum WIDE MODE is automatically chosen for every broadcast, VCR or DVD containing the WSS information.

WSS menu

To enable Auto Selection, set WSS in the Setup menu to On. (See page 18.)

4:3 Mode menu

To set the type of the wide screen, select Normal or Panorama in the 4:3 Mode menu. (See page 18.)

4:3 Mode set to Normal

4:3 Mode set to Panorama
NOTE If the signal contains no WSS information, Auto Selection will not function even when the WSS option is enabled.

LC-26D44E-gb.indd 20

2008/02/19 10:21:34

Still image

You can freeze a motion picture on the screen.

Time display

You can display the time information included in the DTV and Teletext broadcasts.
NOTE Skip step 1 if receiving DTV broadcasts.
Press 3. Press 3 again to exit still image.
NOTE When this function is not available, No still image display available. will display. The still image automatically goes out after 30 minutes.
Select a TV channel providing Teletext information. (The time information is automatically captured.) Press p. The channel display will appear on the TV. Press p again within the several seconds that the channel display is on the screen. Time information will display below the channel display for several seconds. Even when you change the TV channel, you can display the time information with steps 2 and 3 above.

Teletext function

What is Teletext?
Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available.
Turning on and off Teletext
Select a TV channel or external input source providing the Teletext programme. Press m to display the Teletext. Press m again to display the Teletext on the right screen and normal image on the left screen.
Each time you press m, the screen switches as shown below.


NOTE The time display cannot be stored once the power is turned off. When you turn on the power, perform steps 1 to 4 again. If acquired successfully, the time information will appear in the upper-right corner of the screen by pressing MENU.

Button functions

Buttons P (r/s) Colour (Red/ Green/Yellow/ Blue) Description Increase or decrease the page number. Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour (Red/Green/Yellow/Blue) on the remote control unit. Directly select any page from 100 to 899 by using 09.
Reveal or hide hidden information such as an k (Reveal hidden Teletext) answer to a quiz. 3 (Freeze/ Hold) [ (Subtitle for Teletext) Stop updating Teletext pages automatically or release the hold mode. Display the subtitle or exit the subtitle screen. Subtitle will not be displayed when the service does not contain the subtitle information. User for LC-26D44E: Subtitle is set to off when the power is turned on. User for LC-26D44S: Subtitle is set to on when the power is turned on. 1 (Subpage) Reveal or hide subpages. Red button: Move to the previous subpage. Green button: Move to the following subpage. These two buttons are shown on the screen by the signs l and k.

Use space to add a space or overwrite.

1. 3. 5. 7. 9.

Fav Move Skip Erase View

2. 4. 6. 8.

Lock Move To Select Label


To register the new name, press YELLOW (Select) to move the cursor back to the input area. Press OK.
A confirmation message displays.
NOTE The picture window shows a blank image if Radio services are listed.
Press c/d to select Yes, and then press OK.

LC-26D44E-gb.indd 23

2008/02/19 10:21:38
DTV menu operations Favourite
Assign services to 4 different favourite groups.

Move To

Use this function to change the position of two selected services.
Press a/b to select the desired service. Press on the remote control. A selection box displays. Press a/b to register the selected service to any of the 4 favourite groups (None, Fav 1. Fav 4) and then press OK. An icon displays indicating the favourite status.
Do not press END to exit the screen here if you wish to register the change.
Press a/b to select the desired service. Press on the remote control. Enter the number you want to change to using numeric buttons, and then press OK. The positions of the selected services are switched.
Do not press END to exit the screen here if you wish to register the change. You cannot enter a service number that is not listed.
Press OK. Now you can easily select your favourite service from the Programme List. (See page 30.)
Press OK again, the message Successfully updated displays. The change is now registered.
NOTE You cannot register the same service to two different favourite groups.
When the service is locked, you must enter your PIN whenever you tune to the service.
Services that are set to skip will not be picked up when pressing P (r/s).
Press a/b to select the desired service. on the remote control. Press If you have already set the PIN, enter it here. If not, enter the factory preset PIN 1234. An icon displays indicating the service is locked.
Pressing will turn the lock icon on and off. (PIN entry is required when lifting the lock icon.) Do not press END to exit the screen here if you wish to register the change.
Press a/b to select the desired service. on the remote control. An icon Press displays indicating the service to be skipped.
Pressing will turn the skip icon on and off. Do not press END to exit the screen here if you wish to register the change.

Press OK.

NOTE To view services that are set to be skipped, use numeric buttons or select from the Programme List.
NOTE See page 17 for setting the PIN.
Sort the order of the selected service by moving the service position.
Press a/b to select the desired service. on the remote control. An icon Press displays indicating the service to be moved.


NOTE Universal and Parental are the ratings used exclusively in France. X-rated is the rating used exclusively in Spain. For details about ratings see page 34.
Check the version information of the digital module and allow it to be upgraded (when available).
Check the new software version number to confirm the successful upgrade.

Auto upgrade

Software Version
Press c/d to select Accessories. Press OK.
The software version is displayed.
When you tune to the service that provides the upgrade via Over Air Download, a confirmation message displays. Follow the screen prompts.
Check the new software version number to confirm the successful upgrade. NOTE
To scan all carriers for upgrade availability, perform the manual upgrade. The software upgrade may take about 30 minutes, but may take longer (up to 1 hour) depending on the signal status. While updating, you cannot switch to TV or external input mode or enter standby mode using B on the remote control unit. CAUTION Do not disconnect the AC cord when the software upgrade is in progress, as this may cause the upgrade to fail. If problem arises ask a qualified service personnel before the software upgrade period expires.

LC-26D44E-gb.indd 27

2008/02/19 10:21:44
Check the detailed information on the Common Interface module card in use.

Inserting a CA card

A single DVB Common Interface (CI) will be implemented to allow adoption of a Conditional Access (CA) system by means of a plug-in CA module. Scrambled Broadcasting service can be routed via the CA system. If the CA system on the CI module requires a smartcard reader, this reader shall be part of the CI module. When the compatible CA card is inserted, you can view the programme without any operations.
Press OK while the cursor is on Common Interface.
The CI module name is displayed.

CI Module

Module Name


Press OK to access the CI menu.
Detailed information on the CI card in use is displayed.
CA card Common Interface Module
Press a/b to select the item, and then press OK.
Detailed information on the selected item is displayed.
When the compatible card is not inserted:
1 Select the programme which needs the compatible CA card. The caution screen appears. 2 Insert the compatible CA card. The caution screen disappears and you can view the programme.
CA system supported by: Crypto Works Aston CAM VIAccess Nagra Vision Irdeto MR CAM
NOTE To view paid TV broadcasting, you need to make a contract with a service provider. Please contact a service provider for details. The Common Interface Module and the CA card are neither supplied nor optional accessories.
Supplying power to the antenna
You may choose to supply power through the antenna terminal. (See page 4.)

NOTE Once you tune to another service or the power is turned off, the setting returns to the parameter set in the Language menu (page 23).

Displaying subtitles

Set the desired language for the subtitle display and enable/disable the subtitle display.
Press [ when no other menu screen is displayed.


Language Subtitle

English On

Press a/b to select Language, c/d to select the desired language available in the stream, and then press b. Select Subtitle, press c/d to select On or Off.
NOTE When Subtitle is set to On, and the TV is tuned to a service containing both MHEG5 and subtitle data, the subtitle takes priority and subtitle presentation starts automatically. In this case press m to start the MHEG5 presentation.

LC-26D44E-gb.indd 31

2008/02/19 10:21:49




No power.

Possible Solution

Check if you pressed B on the remote control unit. (See page 8.) If the indicator on the TV lights up red, press B. Is the AC cord disconnected? (See page 4.) Check if you pressed a on the TV. (See page 8.) External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after first turning the power off, or unplugging the AC cord and re-plugging it in after 1 or 2 minutes. Are batteries inserted with polarity (e, f) aligned? (See page 5.) Are batteries worn out? (Replace with new batteries.) Are you using it under strong or fluorescent lighting? Is a fluorescent light illuminated to remote control sensor?

Unit cannot be operated.

Remote control unit does not operate.

Picture is cut off.

Is the image position correct? (See page 18.) Are screen mode adjustments (4:3 Mode/WSS) such as picture size made correctly? (See pages 18 and 20.) Adjust the picture tone. (See pages 13 and 14.) Is the room too bright? The picture may look dark in a room that is too bright. Check the colour system setting. (See pages 16 and 19.) Check the HDMI Setup setting. (See page 19.)

When ? is input for some commands, the present setting value responds.
RS-232C serial control cable (cross type, commercially available)

? ? ? ? ?

Communication conditions Set the RS-232C communications settings on the PC to match the TVs communications conditions. The TVs communications settings are as follows:
Baud rate: Data length: Parity bit: Stop bit: Flow control: 9,600 bps 8 bits None 1 bit None

Response code format

Normal response

Return code (0DH)

Problem response (communication error or incorrect command) E R R

LC-26D44E-gb.indd 33

Appendix Commands
CONTROL ITEM POWER SETTING INPUT SELECTION A COMMAND P O W R I I I I I CHANNEL T T D A A G D V T V V D V D D PARAMETER 0 _ _ _ * ? * ? _ _ _ _ _ _ ? * ? _ _ * ? _ _ _ _ _ ? _ _ _ ? _ _ _ _ _ _ _ _ _ _ _ ? * ? _ _ _ _ _ ? _ ? _ _ * ? _ _ _ _ _ ? _ _ _ ? _ _ _ _ _ _ _ _ _ _ _ ? _ ? _ _ _ _ _ ? _ ? _ _ _ ? _ _ _ _ _ ? _ _ _ ? _ _ _ _ _ _ _ _ _ _ _ ? _ ? CONTROL CONTENTS POWER OFF INPUT SWITCHING (Toggle) TV (CHANNEL FIXED) DTV (CHANNEL FIXED) EXT(1 7) 1 to 7, ERR (TV/DTV) TV DIRECT CHANNEL (1 99) 1 to 99 CHANNEL UP CHANNEL DOWN DTV DIRECT CHANNEL (1 to 999) 1 to 999 DTV CHANNEL UP DTV CHANNEL DOWN EXT1 (Y/C) EXT1 (CVBS) EXT1 (RGB) 0 to 2 EXT2 (Y/C) EXT2 (CVBS) EXT2 (RGB) 0 to 2 EXT3 EXT4 EXT5 (COMPONENT) EXT6 (HDMI) EXT7 (HDMI) AV MODE SELECTION (Toggle) STANDARD SOFT ECO USER DYNAMIC 1 to 5 VOLUME (0 60) 0 to 60 TEXT SLEEP TIMER O O O O O O O T T T F F F F F F F E E E T M 0 T M 1 T M 2 T M 3 T M 4 T M 5 T M ? X X X T T T ? * ? _ _ _ _ _ _ ? _ _ ? * ? _ _ _ _ _ _ ? _ _ ? * ? _ _ _ _ _ _ ? _ _ ? _ ? AUDIO CHANGE SURROUND MUTE WIDE MODE CONTROL ITEM POSITION COMMAND H P O S H P O S V V C C P O S P O S L L C K C K E E E E E E E E E E E E E E E E V V V V PARAMETER * ? * ? * ? * ? 1 ? 2 ? 2 ? _ * ? * ? * ? * ? _ _ _ _ _ _ _ _ 0 ? _ _ _ ? _ _ _ ? _ * ? * ? * ? _ ? _ _ _ _ _ _ _ _ _ ? _ _ _ ? _ _ _ ? _ _ ? _ ? _ ? _ ? _ _ _ _ _ _ _ _ _ ? _ _ _ ? _ _ _ ? _ CONTROL CONTENTS H-POSITION AV (f10 e10) AV (f10 e10) V-POSITION AV (f10 e10) AV (f10 e10) CLOCK (0 - 180) 0 to 180 PHASE (0 64) 0 to 64 WIDE MODE (Toggle) NORMAL (AV) ZOOM 14:9 (AV) PANORAMA (AV) FULL (AV) CINEMA 16:9 (AV) CINEMA 14:9 (AV) NORMAL (PC) FULL (PC) 1 to 10 MUTE (Toggle) MUTE ON MUTE OFF 1 to 2 SURROUND (Toggle) SURROUND ON SURROUND OFF 1 to 2 SOUND SELECT (ST/Bilingual/ mono) OFF 30 m 1 h 00 m 1 h 30 m 2 h 00 m 2 h 30 m 0 to 150 TEXT OFF TEXT CHANGE (Toggle) 0 to 1 DIRECT PAGE JUMP (100 899) 100 to 899



D W _ ? 2 ? 5 ? *







NOTE If an underbar (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
Rating table for Child Lock
Useradjusted rating Broadcasted rating
AGE 4 5 6 7 8 9 10 11 Parental 12 13 14 15 16 X-rated 17 18
Universal Parental X-rated
Broadcasted rating Useradjusted rating


LC-26D44E-gb.indd 34

2008/02/19 10:21:53

Item LCD panel Resolution Video Colour System TV Function TV-Standard Receiving Channel Analogue Digital VHF/UHF CATV 26o LCD COLOUR TV, Model: LC-26D44E, LC-26D44S 26o Advanced Super View & BLACK TFT LCD 1,049,088 pixels (1,366 g 768) PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 CCIR (B/G, I, D/K, L, L) DVB-T (2K/8K OFDM) E2E69ch, F2F10ch, I21I69ch, IR AIR Jch, (Digital: E5E69ch) Hyper-band, S1S41ch Auto Preset 99 ch, Auto Label, Auto Sort NICAM/Acd/m2 (in Dynamic Mode) 60,000 hours (in Standard Mode) H : 176 V : 176 10W g 2 (100 mm g 35 mm) g 2 Antenna RS-232C EXT 1 EXT 2 EXT 3 EXT 4 EXT 5 EXT 6 EXT 7 C. I. (Common Interface) OUTPUT Headphones OSD language Power Requirement Power Consumption Weight Operating temperature UHF/VHF 75q Din type (Analogue & Digital) 9 pin mini D-sub SCART (AV input, Y/C input, RGB input, TV output) SCART (AV input/output, Y/C input, RGB input, AV Link) S-VIDEO (Y/C input), RCA pin (AV input) 3.5 mm jack (Audio input), 15 pin mini D-sub (PC) Audio in, Component in HDMI, 3.5 mm jack (Audio input) HDMI EN50221, R206001 RCA pin (Audio) 3.5 mm jack (Audio output) English/German/French/Italian/Spanish/Dutch/Swedish/Portuguese/Finnish/Turkish/Greek/ Russian/Polish AC 220240 V, 50 Hz 95 W (0.9 W Standby) (Method IEC60107) 8.5 kg (Display only), 10.5 kg (Display with stand) 0C to k40C
TV-Tuning System STEREO/BILINGUAL Brightness Backlight life Viewing angles Audio amplifier Speaker Terminals
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. NOTE Refer to inside back cover for dimensional drawings.

Optional accessory

The listed optional accessories are available for the LCD colour TV. Please purchase them at your nearest shop.

Additional optional accessories may be available in near future. When purchasing, please read the newest catalogue for compatibility and check the availability.
Part name Wall mount bracket (LC-26D44E, LC-26D44S) Part number AN-37AG5

LC-26D44E-gb.indd 35

2008/02/19 10:21:54
A. Information on Disposal for Users (private households) 1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details.
Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you dont purchase a new product. Further collection facilities are listed on the homepage of or www.
B. Information on Disposal for Business Users 1. In the European Union
If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities. For Spain: Please contact the established collection system or your local authority for take-back of your used products.


Polgono Industrial Can Sant Joan Calle Sena s/n 08174 SANT CUGAT DEL VALLS BARCELONA (ESPAA)


Printed on environmentally friendly paper Auf kologischem Papier gedruckt Imprim sur papier cologique Stampato su carta ecologica Afgedrukt op ecologisch papier Impreso en papel ecolgico
Printed in Spain Gedruckt in Spanien Imprim en Espagne Stampato in Spagna Gedrukt in Spanje Impreso en Espaa









LC-26D44E LC-26D44S



642.0 642,0

73.9 73,9

94.1 94,1
567.9 567,9 498.0 498,0 446.0 446,0

320.6 320,6

296.0 296,0

52.0 52,0

402.0 402,0 200.0 200,0

230.0 230,0

SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type.
DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. Before replacing the plug cover make sure that: If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires. IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

200.0 200,0

135.0 135,0


Die Modelle LC-26D44E-BK und LC-26D44S-BK besitzen ein schwarzes Gehuse. Die Modelle LC-26D44E-GY und LC-26D44S-GY besitzen ein silberfarbenes Gehuse. Die in dieser Bedienungsanleitung dargestellten Illustrationen und Bildschirm-Einblendungen dienen lediglich der Veranschaulichung und knnen sich von denen im tatschlichen Betrieb geringfgig unterscheiden. Ab Werk ist als Geheimnummer 1234 eingestellt.



253 TC D-EJ250 9000XLT Yamaha M-2 ER-A420 JVM205H Head FA489 F212X TL-WN610G Review HS 820 DP-8032 F72 EXR 88730 Citiz PC-D320 Channel GL656 PEG-N760C RB-880 CLP-315 ETS UX-A450 Black Evo4 I1036 CDR-1000 Nvusb20 MP720 M6 D6 Server MC6600P X-790 RM2330 FP-D350 Pilot FZ1-2008 VGN-FZ11M RT37masw Cyclecomputing C2 1 MP-CS100 AL1702 CT-W803RS YST-SW100 ML-2150 RX630 Iridium 9500 TX-906 M5262 Sentra 1996 KX-T7440 Ross-tech Vcds FO-90 DSC-T9 DV2140 ZWY180 Universel WC275 DV296-PM TI-84 Plus 4X4-2001 VGN-FS315M T4YBF IM-MT899H NV-U74T Roadsport R KDL-32P3550 BT108 Linea 300 FW395C MX3950D BX300F Scanmaker 5900 MC8087TRC Txpf50G20S S5700 Pesumasin TCM-400DV DVD740VR-021 Seiko SDW L80 81 BJC-800 RT45masw HF25M260 VGN-FW11ER EH777501E GE82WT Samsung X480 TX-SR403 TI-5033SV Aficio 6110 MS-7529 PMA400 RM-V301 MHC-S9D DWS-3000 YST-MSW10 Ericsson J105 Powershot S60 Nitro Kart Picker Spring


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101