Reviews & Opinions
Independent and trusted. Read before buy Sharp LC-26GA3E!

Sharp LC-26GA3E

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sharp LC-26GA3e TV, size: 3.4 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sharp LC-26GA3EAbout Sharp LC-26GA3E
Here you can find all about Sharp LC-26GA3E like manual and other informations. For example: review.

Sharp LC-26GA3E manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sharp LC-26GA3E please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sharp LC-26GA3E photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc1

Printed on 100% post-consumer recycled paper. Gedruckt auf 100% wiederverwertungs Papier. Imprim sur 100% de papier recycl. Stampato su carta riciclata al 100%. Gedrukt op 100% kringlooppapier. Impreso en 100% de papel reciclado de postconsumo.
Printed in Japan Gedruckt in Japan Imprim au Japon Stampato in Giappone Gedrukt in Japan Impreso en Japn

TINS-B448WJZZ

04P06-JKG

ESPAOL

NEDERLANDS

SHARP CORPORATION

OPERATION MANUAL BEDIENUNGSANLEITUNG MODE DEMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO

ITALIANO

LCD COLOUR TELEVISION LCD-FARBFERNSEHGERT TLVISION COULEUR CRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISORE A COLORI LCD

FRANAIS

DEUTSCH

LC-26GA3E

ENGLISH

B448WJZZ

OPERATION MANUAL MANUALE DI ISTRUZIONI BEDIENUNGSANLEITUNG GEBRUIKSAANWIJZING MODE DEMPLOI MANUAL DE MANEJO
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type.
DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. Before replacing the plug cover make sure that: If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires. IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
LCD COLOUR TELEVISION ENGLISH OPERATION MANUAL

Contents

Contents 1 Dear SHARP customer 3 Important Safety Precautions 3 Supplied accessories 5 Preparation 6 Setting the TV 6 Inserting the batteries 7 Using the remote control unit 7 Cautions regarding remote control unit 7 Basic connection 8 Connecting to an antenna 8 Initial auto installation 9 Part names 10 TV 10 Remote control unit 12 Watching TV 13 Turning on the power 13 Turning off the power 13 Simple button operations for changing channels 14 Using Flashback (A) on the remote control unit 14 Simple button operation for changing volume/sound 15 Basic adjustment settings 17 Menu operation buttons 17 On-Screen Display 17 TV/AV input mode menu items 18 PC input mode menu items 18 Auto installation 19 Programme setup 19 Auto search 19 Manual setting for each channel 20 Fine tuning 20 Colour system 21 Sound system (Broadcasting system) 21 Labelling channels 21 Skipping channels 22 Setting the decoder 22 Setting the child lock 22 Setting the booster 22 Sort 23 Erase Programme 23 Language setting for on-screen display 24 OPC setting 24 Picture adjustments 25 C.M.S. (Colour Management System) 26 Colour temperature 26 Black 26 3D-Y/C 27 Monochrome 27 Film mode 27 I/P setting 27 Audio adjustment 28 Dolby Virtual 28 Power control 29 Power control for AV source 29 Power control for PC source 29 Using external equipment 30 Displaying an external equipment image 30 Displaying a DVD image (Example) 30 Connecting a decoder 31 Connecting a VCR 31 Using AV Link function 32 Connecting a DVD player 33 Connecting a game console or camcorder 33 Connecting a PC 34 Connecting external speakers 35 External Audio Bypass 35

10. ServicingDo not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified service person to perform servicing. 11. RepairIf any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a qualified service person to perform repairs. a. b. c. d. When the AC cord or plug is damaged. When a liquid was spilled on the product or when objects have fallen into the product. When the product has been exposed to rain or water. When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician. e. When the product has been dropped or damaged. f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing. 12. Replacement partsIn case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 13. Safety checksUpon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition. 14. Wall or ceiling mountingWhen mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.
CleaningUnplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moistureDo not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.

Remote control sensor

LC-26GA3E(E)-b

04.5.27, 2:30 PM

Simple operations for watching a TV programme

Basic connection

Connecting to an antenna
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of connecting to an antenna with a coaxial cable.
Antenna cablescommercially available
If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325 plug (IEC 169-2), plug it into the IN terminal at the rear of the TV.
Initial auto installation
When the TV powers on for the first time after purchase (see page 13), the initial auto installation is invoked. You can automatically set language, country and channels in successive operations.
After this setting, auto search starts with the following order.
1 Programme auto search 2 Auto labelling 3 Auto sorting 4 Preset download
You do not need to do anything during the auto search.
The illustrations and on-screen displays in this manual are for explanation purposes and may vary slightly from the actual operations.
Automatic channel searching
The initial auto installation functions only once. If the initial auto installation is not completed, (ex: When menu screen disappeared by not operating for a few minutes, when the power shut down, etc.), try Auto Installation from the set up menu. (See page 19.) The initial auto installation stops by pressing RETURN.
Channel auto search finds all channels viewable in your area.

01 55.25

02 85.25

03 102.25

Setting the on-screen display language 1 Press a/b/c/d to select the desired language listed on the screen. 2 Press OK to enter the setting.
If no channel is found, No programme found. displays. And the auto installation finishes.

Language list

Dutch English Finnish French German Greek Italian Polish Portuguese Russian Spanish Swedish Turkish
Automatic channel labelling After finding TV channels, the TV starts naming each TV channel found.

01 SAT.PRKABEL

The TV can only name channels where the channel labelling information is provided. If no channel labelling information is provided, the TV only displays the channel number, leaving the channel name blank.
Setting the country or area 1 Press a/b/c/d to select your country or area listed on the screen. 2 Press OK to enter the setting.
The programme auto search starts at the same time.
Automatic channel sorting When channel auto labelling finishes, the TV starts sorting the labelled channels.

Country list

NOTE When using the remote control unit, point it at the Display.

Watching TV

Turning on the power
Press POWER on the TV. POWER POWER indicator
The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, the initial auto installation will not be invoked. See page 19 to try Auto installation from the Setup menu. POWER indicator (Green): The TV is on. (After a few seconds, a window appears with sound.)

Turning off the power

Press B on the remote control.
The TV enters standby mode and the image on the screen disappears. The POWER indicator on the TV changes from green to red.

Press POWER on the TV.

The POWER indicator on the TV gradually turns off. When the TV is turned off by POWER, you cannot turn on the power by pressing B on the remote control.
If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet. Weak electric power is still consumed even when POWER is turned off.

Display status indicator

Off Red Green Power off The TV is in standby mode. The TV is on.

LC-26GA3E(E)-c

04.5.27, 2:31 PM
Simple button operations for changing channels
You can change channels in several ways. Using Pr/son the remote control unit
Press Pr to increase channel number. Press Ps to decrease channel number.
Channel display Channel display changes approximately after 3 seconds as shown below. (Example)

SAT.PAL B/G

SAT.MONO
Using Flashback (A) on the remote control unit
Ps/r on the Display operates the same as Ps/ron the remote control unit.
Using on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
Press A to switch the currently tuned channel to the previously tuned channel. Press A again to switch back to the currently tuned channel. Press A to toggle between the currently selected input source and the previously selected one. Press A to return to the previous page in TELETEXT mode.
a To select a 1-digit channel (e.g. channel 2): Press 2. If 2 is indicated and the picture does not change immediately, press o to switch over to the 1-digit select mode and press 2 again. To select a 2-digit channel (e.g. channel 12): Press o to set the 2-digit select mode. Press 1, followed by 2.

Complete this procedure within 3 seconds, otherwise the selection will not be made on the 2-digit channel mode. When viewing Teletext information
View a page directly which is 3-digit page number from 100 to 899 by pressing buttons 0 to 9.
Watching TV Using SOUND on the remote control unit
Simple button operation for changing volume/sound

Changing the volume

You can change the volume on the Display or on the remote control unit.
In the NICAM TV broadcasts When receiving a stereo signal Each time you press SOUND, the mode switches between NICAM STEREO and MONO. il/k lk
When receiving a bilingual signal Each time you press SOUND, the mode switches among NICAM CH A, NICAM CH B, NICAM CH AB and MONO.
When receiving a monaural signal Each time you press SOUND, the mode switches between NICAM MONO and MONO. In the TV mode of A2 TV broadcasts When receiving a stereo signal Each time you press SOUND, the mode switches between STEREO and MONO.
To increase the volume, press ik. k To decrease the volume, press il. l
TV, INPUT1, INPUT2, INPUT3 and INPUT4 modes can each store volume adjustment values separately.
When receiving a bilingual signal Each time you press SOUND, the mode switches among CH A, CH B and CH AB.
When Audio Out is set to Variable, the indicator on the screen changes as shown below.
When receiving a monaural signal When you press SOUND, MONO displays.
When no signal is input, the sound mode will display MONO.

Audio status

Audio out Output device Speaker AUDIO OUTPUT Fixed
Variable sound Constant as specified

Variable

Mute Variable sound
See page 44 for details on the audio out function.
Watching TV Using e on the remote control unit
e mutes the current sound output.
Virtual on the remote control unit
Virtual produces Dolby Virtual effect from the speaker. Each time you press Virtual, the mode changes between On and Off. Dolby Virtual sound options

Booster menu displays.

Press a/b to set Decoder to INPUT1, or INPUT2 and then press OK.
Press a/b to set Booster to On, and then press OK.
Off is factory preset value. INPUT1 is the recommended selection.
If signal strength is strong enough for the selected channel, the effect is negligible and may produce instability. In such case, select Off.
Basic adjustment settings Sort
Channel positions can be sorted freely.

Erase Programme

The individual programme can be erased.
Repeat steps 1 to 3 in Sort.
Press c/d to select Setup. Press a/b to select Programme Setup, and then press OK. If you already set the PIN, enter it here.
Press a/b to select Erase Programme, and then press OK. Press c/d to select Yes, and then press OK. Press a/b/c/d to select the channel you want to erase, and then press OK.
A message screen pops up.
Press a/b to select Sort, and then press OK. Press c/d to select Yes, and then press OK. Press a/b/c/d to select the channel you want to move, and then press OK. Move it to the desired position by pressing a/b/c/d, and then press OK. Repeat the steps 6 and 7 until all desired channels are sorted.
Press c/d to select Yes, and then press OK to erase the selected programme. All the subsequent programmes move up. Repeat the step 5 until all desired channels are erased. Erase programme menus

02 Pro12 17

03 KABEL 18 Next

Sort menus

01 SAT.1 06

02 KABEL

02 Pro7 Next

01 SAT.11

02 KABEL Next

01 KABEL

02 KABEL 17

02 SAT.1

Language setting for on-screen display
You can also select a language from setup menu. Select from among 13 languages.

OPC setting

Automatically adjusts the brightness of the screen. Using OPC on the remote control unit
Press c/d to select Setup. Press a/b to select Language, and then press OK. Press a/b/c/d to select the desired language listed on the screen, and then press OK.
Press OPC to switch the Optical Picture Control on and off. Using OPC on the menu screen
Press c/d to select Picture.

Press a/b to select OPC.

Press c/d to select On.
When set to On, the System senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

Selected item Off On

Description
The brightness is fixed at the value set in Backlight (see page 25). Automatically adjusts

LC-26GA3E(E)-e

04.5.27, 2:33 PM

Picture adjustments

Adjust the picture to your preference with the following picture settings.
Press a/b to select a specific adjustment item. Press c/d to adjust the item to your desired position.
NOTE For resetting all adjustment items to the factory preset values, press a/b to select Reset, and then press OK.
Adjustments items for AV source

[Picture] Audio Picture

Adjustments items for PC source

USER [TV]

OPC Backlight Contrast [+8] [+30] Off On +8 +40 +30 +30 +30 +10

USER [PC]

OPC Backlight Contrast [+8] [+30] Off On +8 +40 +30 +30 +30 +30
Brightness [0] Colour Tint [0] [0]
Brightness [0] Red Green Blue Advanced Reset [0] [0] [0]
Sharpness [0] Advanced Reset
Selected item Backlight Contrast Brightness Colour Tint Sharpness

cbutton

The screen dims

dbutton

The screen brightens
Selected item Backlight Contrast Brightness Red Green Blue

For less contrast

For more contrast
For less brightness For less colour intensity Skin tones become purplish For less sharpness
For more brightness For more colour intensity Skin tones become greenish For more sharpness

For less brightness

For more brightness

For weaker red

For stronger red

For weaker green

For stronger green

For weaker blue

For stronger blue
Select Advanced and then press OK to set C.M.S-Hue, C.M.S-Saturation, C.M.S-Value, Colour Temp, Black, 3D-Y/C, Monochrome, Film Mode or I/P Setting. See pages 26 and 27.
Select Advanced and then press OK to set C.M.S-Hue, C.M.S-Saturation and C.M.S-Value.
Basic adjustment settings C.M.S. (Colour Management System)
Colour tone is managed using the six-colour adjustment setting.

Colour temperature

Adjusts the colour temperature to give the best white image.
Press MENU and the MENU screen displays. Press c/d to select Picture.
Repeat steps 1 to 3 in C.M.S. (Colour Management System). Press a/b to select Colour Temp., and then press OK. Press a/b to select the desired level, and then press OK.
Selected item Description

White with bluish tone

Press a/b to select Advanced, and then press OK. Press a/b to select C.M.S.-Hue, and then press OK. Press a/b to select a specific adjustment item.
C. M. S-Hue C. M. S-Saturation C. M. S-Value Changing reds closer to magenta or yellow. R Y G C B M Reset [ 0] [ 0] [ 0] [ 0] [ 0] [ 0] +30 +30 +30 +30 +30 +30

Press a/b to select No Signal Off, and then press OK. Press c/d to select Enable, and then press OK.
Five minutes before the power shuts down, remaining time displays every minute.

Selected item Off

Disable is factory preset value. When a TV programme finishes, this function may not operate.
No Operation off When set to Enable, the power will automatically shut down if there is no operation for 3 hours.
Press a/b to select No Operation Off, and then press OK. Press c/d to select Enable, and then press OK.
Disable is factory preset value.

04.5.27, 2:35 PM

Using external equipment
You can connect many types of external equipment to your TV, like a decoder, VCR, DVD player, PC, game console and camcorder. To view external source images, select the input source from b on the remote control unit or INPUT on the Display.
Displaying an external equipment image
Explanation here is for the setting when connecting DVD to INPUT3 terminal.
Displaying a DVD image (Example)
To watch a DVD image, select INPUT3 from INPUT SOURCE menu using b on the remote control unit or INPUT on the Display.
INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4
To protect all equipment, always turn off the TV before connecting to a decoder, VCR, DVD player, PC, game console, camcorder or other external equipment.
Select the desired signal type on Input Select in the Option menu. (See page 37.) For INPUT3 signal

[Option. Input Select]

See pages 31 to 35 for external equipment connection. Please refer to the relevant operation manual (DVD player, PC, etc.) carefully before making connections. Each time b is pressed, the input source toggles. If the image does not come in clearly, you may need to change the input signal type setting on the Input Select menu. Refer to your external equipment operation manual for the signal type.
AUTO COMPONENT S-Video Video
The setting is stored and can be selected on the INPUT SOURCE menu.

LC-26GA3E(E)-g

04.5.27, 2:36 PM
Using external equipment Connecting a decoder
You can use the INPUT 1 terminal when connecting a decoder and other audiovisual equipment.
In cases when the decoder needs to receive signal from the TV, make sure to set Decoder to INPUT1 in the Programme Setup Manual Adjust menu. (See page 22.) To watch an image from this input terminal, you may select the input source (see page 37) and the input signal type (see page 42).

AUDIO cable (commercially available)
Component cable (commercially available)

DVD player

When using component cable, select COMPONENT for Input Select in the menu.
Connecting a game console or camcorder
A game console, camcorder and some other audiovisual equipment are conveniently connected using the INPUT 3 terminals.
To watch an image from this input terminal, you NOTE may select the input source (see page 37) and the input signal type (see page 42). The S-video terminal has priority over the video terminals. You can also connect the game console to INPUT 1 or 2 terminals to enjoy clearer picture.
S-video cable (commercially available)
Composite video cable (commercially available)

Game console/Camcorder

Using external equipment Connecting a PC
Use the INPUT4 terminals to connect a PC.
NOTE The PC input terminals are DDC1/2B-compatible. Refer to page 51 for a list of PC signals compatible with the TV.
To watch the image from this input terminal, you may select input source (see page 37) and input signal type (see page 42).
3.5 mm stereo minijack cable (commercially available)
DVI cable (commercially available)
RGB/DVI conversion cable (commercially available) NOTE Macintosh adaptor may be required for use for some Macintosh computers. When connecting to a PC, the correct input signal type is automatically detected. (See page 42.) If the PC image does not come in clearly, you may need to set the Auto Sync. adjustment in the Setup menu. (See page 36.) 34
Connecting external speakers

External Audio Bypass

External Audio Bypass automatically optimises the audio quality to suit internal (supplied) speaker.

Rear view

Press c/d to select Setup.
Press a/b to select Speaker Setup, and then press OK. Press a/b to select External Audio Bypass, and then press OK. Press c/d to select Yes or No, and then press OK. Description
Sets the optimum audio for the internal (supplied) speaker. When you are using your own speakers, output the original sound.

Selected item

How to connect the speaker cable 1 Pull up the

No Yes

2 Insert the

edge of the cable.

NOTE External Audio Bypass is greyed out when Dolby Virtual is set to On. When Dolby Virtual is on, External Audio Bypass automatically sets to Yes.

3 Put the lid

back down.
Make sure to disconnect the connected speaker cables in advance when connecting external speakers. Make sure to connect the speaker terminal and cable polarity (L, +) properly.

The speaker terminals have plus (L) and minus (+) polarity. Plus is red and minus is black. The cables are also divided into plus and minus. When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct cables.
NOTE Unplug the AC cord from the AC outlet before installing the speakers. CAUTION
Make sure external speakers have 4 ohm and 10 watt specifications. Connect the plus/minus terminals with the correct cables. Incorrect connection may cause a short. 35
Useful adjustment settings
Image position (for TV/AV input mode)
For adjusting a pictures horizontal and vertical position.

Audio Only

When listening to music from a music programme, you can set the Display off and enjoy audio only.
Press c/d to select Option.
Press a/b to select Position, and then press OK. Press a/b to select H-Pos. or V-Pos.
Press a/b to select Audio Only, and then press OK. Press c/d to select On, and then press OK.
Audio is output without screen image. Both screen images and audio are output.

H-Pos. V-Pos. Reset

[0] [0]

+10 +20

Selected item On
NOTE For resetting all adjustment items to the factory preset values, press a/b to select Reset, and then press OK. Adjustments are stored separately according to input source. This function is available for AV input mode and TV tuner mode.
Selected item H-Pos. V-Pos.
Auto Sync. adjustment (PC input mode only)
For automatically adjusting the PC image.
Centres the image by moving it to the left or right. Centres the image by moving it up or down.
Press a/b to select Auto Sync., and then press OK. Press c/d to select Yes, and then press OK.
Auto Sync. starts and Adjusting the image displays.
NOTE When Auto Sync. is successful, Auto Sync completed successfully displays. If not, Auto Sync. failed. Auto Sync. may fail even if Auto Sync completed successfully displays. Auto Sync. is likely to succeed when an input PC image has wide vertical stripes (ex. pattern with high contrast stripes, or cross-hatched). It may fail when an input PC image is solid (low contrast). Be sure to connect the PC to the TV and switch it on before starting Auto Sync.

Selected item STANDARD MOVIE GAME USER Description
For a highly defined image in a normally bright room For a movie Lowers image brightness for easier viewing. Allows the user to customise settings as desired. You can set the mode for each input source. For a clear-cut image emphasising high contrast for sports viewing

4:3 mode Normal

4:3 mode Panorama

DYNAMIC

You can select a different AV MODE item for each input mode. (For example, select STANDARD for TV input and DYNAMIC for VIDEO input.)
Selected item Normal Panorama
Normal range keeping 4:3 or 16:9 aspect ratio Wide image without side bars

04.5.27, 2:38 PM

Useful adjustment settings WIDE MODE Normal Zoom 14:9 Panorama Full Cinema 16:9 Cinema 14:9
WIDE mode (for TV/AV input mode)

Manual Selection

Press f.
The WIDE MODE menu displays. The menu lists the wide mode options selectable for the type of video signal currently received.
Press f or a/b while the WIDE MODE menu displays on the screen.
As you toggle down the options, each is immediately reflected on the Display. No need to press OK.

Auto Selection

If you set WSS and 4:3 Mode in the Setup menu on page 39, the optimum WIDE mode is automatically chosen for every broadcast containing the WSS information. WSS menu To enable Auto Selection, set WSS in the Setup menu to On. (See page 39.) 4:3 Mode menu To set the type of the wide screen, select Normal or Panorama in the 4:3 Mode menu. (See page 39.)
If the broadcast signal contains no WSS information, Auto Selection will not function even when the WSS option is enabled. This function is available for AV input mode and TV tuner mode.

4:3 Mode set to Normal

4:3 Mode set to Panorama
Selected item Normal Zoom 14:9 Panorama Full Cinema 16:9 Cinema 14:9
Description For 4:3 standard pictures. A side bar appears on each side. For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes. In this mode the picture is progressively stretched toward each side of the screen. For 16:9 squeeze pictures. For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

Normal

Zoom 14:9

Panorama

Cinema 14:9

Cinema 16:9

LC-26GA3E(E)-i

Input signal (640m480)

WIDE mode (for PC input mode)
You can select the screen size.
Connect the PC before making adjustments. (See page 34.) Selectable screen size may vary with input signal type.
WIDE MODE Normal Cinema Full Dot by Dot

Each time you press SLEEP, the remaining time switches as shown below.
When the time has been set, countdown automatically starts. Five minutes before the preset of time expires, the remaining time displays each minute.
0 hr. 30 min. Off 1 hr. 00 min. 2 hr. 30 min. 1 hr. 30 min. 2 hr. 00 min.
Select Off by pressing SLEEP to cancel the sleep timer.
PIN setting for child lock (for TV/AV input mode)
Allows you to use a PIN to protect certain settings from being accidentally changed.

Resetting the PIN

Allows you to reset your PIN.
Press a/b to select Child Lock, and then press OK. Enter the PIN.
Press a/b to select Cancel PIN, and then press OK. Press c/d to select Yes, and then press OK.
Press a/b to select Child Lock, and then press OK. If you already set the PIN, enter it here.
Press a/b to select Change PIN, and then press OK.

Change PIN Cancel PIN

As a precautionary measure, make a note of your PIN and keep it in a familiar place. If you lose or forget your PIN, initialise the TV to return all settings except for the TV channel settings to factory preset values. (See page 57.) This function is available for TV tuner mode.

New PIN

Reconfirm
Enter the 4-digit number as a PIN using 0 9.
Enter the same 4-digit number as in step 6 to confirm.
The system PIN has been changed successfully displays.
To view a locked channel (Lock setting in Programme Setup Manual Adjust is set to On), you must enter a PIN. (See page 22.) When you select a locked channel, a PIN prompt message pops up. Press OK to display the PIN input window. 45
Useful adjustment settings Centre Channel Input
You can use the speaker as the centre speaker when using a 5.1ch surround system.

AV amplifier

* Connect to external audio equipment that supports a 5.1ch surround system. Refer to your external equipment operation manual for details.

DVD player, etc.

Press c/d to select Option, and then press OK. Press a/b to select Centre Channel Input, and then press OK. Press c/d to select On , and then press OK.
Only the sound from the Centre Channel Input terminal is output from the speaker.

 

Tags

Hitachi W43H Faronics Core EN 660 6427FF Grundig DC24 TX-28PK1 Lecoaspira 690 KV-2168MTJ RC-08 Review RH487H 35 GSN KX-TG8011G Canon I850 HC-8017 SL-P477A Serie 2 WD-1470FD Mouse Ericsson W980 - 2006 Populous II Compressors HG 27V530T LE32B350 Cruise Navigator DVX9900H Mcbc58DST Z33 WP PS50A416 E402B PRO 7 MP800 HT-Z221 TH55B HD Kenox D503 TM-EC5658V DJM-700-S EL-506W 546W RDR-HX785 Grill-bake Oven 020-T WTC1155F Classic Rs 550 Nokia 5320 AP 541N KX-TG2120 ZWF1221 Deskjet 6127 S-301 Aspire-5100 C230S P2510 OSS450 PRO HS FX-570ES Plus Scanner Cocoon 1100 DXZ865MP ST-60 RED CD4000 Challenge Sis761 MAX-SIN PLC-XP40 TC-755 Trend 3 CL28W440AN B1030A Motorola Dext Motorola T192 TM-733A HD502IJ GS108 MX-4500N Coolpix S640 Steriliser 885 Plus Black Evo4 323F-1989-1994 AX100G WIM 2000 AR-206 AN-102 Digital Seville 1994 KDL-26U2000 120V DSC-S70 TH-42PM50 Ericsson C702 Laserjet 2400 Pilot S5233S HM502JX CCD-FX410 LL1820 GR-D60 SKY

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101