LC-32LE700E LC-32LE700S LC-40LE700E LC-40LE700S LC-46LE700E LC-46LE700S LC-52LE700E LC-52LE700S
LC-32LX700E LC-40LX700E LC-46LX700E LC-32LU700E LC-32LU700S LC-40LU700E LC-40LU700S LC-46LU700E LC-46LU700S LC-32LE705E LC-32LE705S LC-40LE705E LC-40LE705S LC-46LE705E LC-46LE705S LC-52LE705E LC-52LE705S LC-32LX705E LC-40LX705E LC-46LX705E LC-32LU705E LC-32LU705S LC-40LU705E LC-40LU705S LC-46LU705E LC-46LU705S
SHARP ELECTRONICS (Europe) GmbH
Sonninstrae 3, D-20097 Hamburg

SHARP CORPORATION

http://www.sharp-eu.com
LCD COLOUR TELEVISION LCD-FARBFERNSEHGERT TLVISEUR COULEUR CRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIN EN COLOR LCD TELEVISOR DE CRISTAL LQUIDO
OPERATION MANUAL BEDIENUNGSANLEITUNG MODE DEMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO MANUAL DE OPERAO
Printed in Poland Gedruckt in Polen Imprim en Pologne Stampato in Polonia Gedrukt in Polen Impreso en Polonia Impresso na Polnia PIN

TINS-E281WJN1

09P10-PL-NG

Cover_GB01_LE705E.indd 1

2009/10/09 13:54:08
PORTUGUS ESPAOL NEDERLANDS ITALIANO FRANAIS DEUTSCH ENGLISH
LC-32LE700E/LC-32LE700S/ LC-40LE700E/LC-40LE700S/ LC-46LE700E/LC-46LE700S/ LC-52LE700E/LC-52LE700S E281WJN1 OPERATION MANUAL/BEDIENUNGSANLEITUNG/MODE DEMPLOI/MANUALE DI ISTRUZIONI/GEBRUIKSAANWIJZING/MANUAL DE MANEJO/MANUAL DE OPERAO

() 52o/46o

( 1238.0 ) / [ 1099.0 ] ( 1238,0 ) / [ 1099,0 ]

52o 46o 52o/46o

( 817.0 ) / [ 740.0 ] ( 817,0 ) / [ 740,0 ]
( 765.0 ) / [ 688.0 ] ( 765,0 ) / [ 688,0 ]
( 1157.0 ) / [ 1023.4 ] ( 1157,0 ) / [ 1023,4 ] ( 651.0 ) ( 651,0 ) [ 575.6 ] [ 575,6 ]
( 452.0 ) ( 452,0 ) [ 415.0 ] [ 415,0 ]
470.0 ( 125.5 ) ( 125,5 ) [ 125.7 ] [ 125,7 ] 470,0 ( 95.0 ) ( 95,0 ) [ 93.2 ] [ 93,2 ]
400.0 400,0 175.0 175,0 400.0
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.

335.0 335,0

40o/32o
( 964.0 ) / [ 767.0 ] ( 964,0 ) / [ 767,0 ]

40o 32o

( 664.0 ) / [ 554.0 ] ( 664,0 ) / [ 554,0 ]
( 612.0 ) / [ 502.0 ] ( 612,0 ) / [ 502,0 ]
( 887.8) / [ 700.0 ] ( 887,8) / [ 700,0 ] ( 500.4 ) ( 500,4 ) [ 394.5 ] [ 394,5 ] ( 377.0 ) ( 377,0 ) [ 321.0 ] [ 321,0 ]

For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to television distribution systems.

LC-LE705E_GB.indd 2

2009/10/09 14:12:49

Remote control unit

B (Standby/On) (Page 12) Buttons for useful operations m (Teletext) ATV: Display analogue teletext (Page 15). DTV: Select MHEG-5 and teletext for DTV (Page 15). k (Reveal hidden teletext) (Page 15) [ (Subtitle) Switch subtitle languages on/off (Pages 15 and 32). 3 (Freeze/Hold) Press to freeze a moving image on the screen. Teletext: Stop updating teletext pages automatically or release the hold mode. 1 (Subpage) (Page 15) v (Top/Bottom/Full) Set the area of magnification in teletext mode (Page 15). 3 Numeric buttons 0_9 Set the channel. Enter desired numbers. Set the page in teletext mode. When the five Nordic countries (Sweden, Norway, Finland, Denmark or Iceland) are selected in the country setting from Auto installation (page 27), DTV services are four digits. When another country is selected, DTV services are three digits. A (Flashback) Press to return to the previously selected channel or external input. DTV Press to access digital TV mode. ATV Press to access conventional analogue TV mode. 2 (Sound mode) Select a sound multiplex mode (Page 12). i+/- (Volume) Increase/decrease TV volume. e (Mute) TV sound on/off. 0 f (WIDE MODE) Select a wide mode (Pages 31 and 37). Q # Select a video setting (Page 24). W a/b/c/d (Cursor) Select a desired item on the setting screen. ; Execute a command within the MENU screen. ATV/DTV: Display the programme list when no other MENU screen is running.
E > Exit the MENU screen. R R/G/Y/B (Colour) buttons The coloured buttons are correspondingly used to select the coloured items on the screen (e.g., EPG, MHEG-5, teletext). T b (INPUT SOURCE) Select an input source (Page 12). Y EPG DTV: Display the EPG screen (Pages 13_14). U RADIO DTV: Switch between radio and data mode. When only data broadcasting (no radio broadcasting) is transmitted by DVB, the radio broadcasting will be skipped. I P. INFO Press to display programme information which is transmitted through digital video broadcasting in the upper left corner of the screen (DTV only). O :r/s Select the TV channel. P p (Display information) Press to display the station information (channel number, signal, etc.) in the upper right corner of the screen (Page 33). A ECO (Standard/Advanced/Off) Select Energy save setting (Page 26). S @ MENU screen on/off. D 6 (Return) Return to the previous MENU screen. F SLEEP Press to schedule a time for the TV to automatically standby (Page 26). G AQUOS LINK buttons If external equipment such as a AQUOS BD player is connected via HDMI cables and is AQUOS LINK compatible, you can use these AQUOS LINK buttons. See pages 19 and 21 for details.

If you want to use the EPG for digital stations, select Yes. The EPG data must be automatically captured while the TV is in standby mode. After setting to Yes, it may take some time to turn off the power using the remote control unit due to the process of the data capture.
If the MAIN POWER switch or the power button on the TV are switched off, the EPG data will not be captured.

E Display range setup

The Display range setup allows you to select three types of time spans for display on the screen.
Item Mode 1 (Wide angle) Mode 2 (Zoom) Mode 3 (Vertical angle) Displays six hours of programme information. Displays three hours of programme information. Changes to the EPG display format with a vertical time span.
Press a/b to select the desired item, and then press ; (e.g., EPG setup, Display range setup, etc.).
EPG setup Display range setup Genre icon setup Receive broadcasting EPG automatically? Yes No
Press a/b/c/d to select or adjust the desired item, and then press ; (e.g., Yes, No, etc.).

E Genre icon setup

You can grey out or place a mark on desired genres and smoothly search for programmes you frequently watch.

E Genre icon list

Icon Genre Movie/Drama News/Current affairs Show/Game show Sports Childrens/Youth programmes Icon Genre Music/Ballet/Dance Arts/Culture (without music) Social/Political issues/Economics Education/Science/ Factual topics Leisure hobbies

LC-LE705E_GB.indd 13

2009/10/09 14:13:00
Selecting a programme using EPG

Basic operation

The illustrations on this page are explained using three digit services.

E Display/Close the EPG

screen

Press EPG.

Programme info. Search by genre Search by date

Select

E Select a programme

1 Select the time span

Press c/d to select the time span you want to search.
Continue to press d to display programmes in the next time span.
2 Select the desired programme
Press a/b to select the desired programme.
If a or b are displayed on the left of the services, continue to press a/b to display next or previous screen.

Useful functions

3 Check programme information 3
Press a/b/c/d to select the programme you want to check. Press R, and then press ; to tune to the selected programme.
Movie/Drama News/Current affairs Show/Game show Sports Childrens/Youth programmes Music/Ballet/Dance

4 Search a programme in a category
Press G. Press a/b to select the desired genre, and then press ;. Press a/b to select a programme you want to watch, and then press ;.
Refer to page 13 for the genre setting.
5 Search for a programme by date/time 1 2
Press Y. Press c/d to select the desired time span, and then press ;.
Search by time 0 AM - 6 AM Select time Enter Today 6 AM - 0 PM Back to EPG 0 PM - 6 PM Enter 6 PM - 0 AM +1 Week Next Next
Press a/b to select the desired programme, and then press ;.

LC-LE705E_GB.indd 14

2009/10/09 14:13:01

Teletext

What is teletext?
Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available.
Buttons for teletext operations
Buttons :r/s Description Increase or decrease the page number. Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding colour (R/G/Y/B) on the remote control unit. Directly select any page from 100 to 899 by using the 0_9 numeric buttons. Switch the teletext image to top, bottom or full. Reveal or hide hidden information such as an answer to a quiz. Stop updating teletext pages automatically or release the hold mode. Display the subtitle or exit the subtitle screen.
Subtitles will not be displayed when the service does not contain subtitle information. Move to the previous subpage (R). Move to the following subpage (G). These two buttons are shown on the screen by the symbols e and f.

Colour (R/G/ Y/B)

Numeric buttons 0_9 v (Top/ Bottom/Full) k (Reveal hidden teletext) 3 (Freeze/ Hold)

Turning teletext on/off

Select a TV channel or external source providing a teletext programme. Press m to display the teletext.
Many stations use the TOP operating system, while some use FLOF (e.g., CNN). Your TV supports both these systems. The pages are divided into topic groups and topics. After switching on the teletext, up to 2,000 pages are stored for fast access. If you select a programme with no teletext signal, No Teletext available displays. The same message displays during other modes if no teletext signal is available.

[ (Subtitle for teletext)

Reveal or hide subpages.

TELETEXT

1 (Subpage)

Each time you press m, the screen switches as shown above. Press m again to display the teletext on the right screen and the normal image on the left screen.
Using the MHEG-5 application (UK only)
Some services bring you programmes with the MHEG application encoded, letting you experience DTV interactively. When provided, the MHEG-5 application will start when you press m.
Teletext will not work if the selected signal type is RGB (Page 34).

LC-LE705E_GB.indd 15

2009/10/09 14:13:02
Connecting external devices

E Before connecting.

Be sure to turn off the TV and any devices before making any connections. Firmly connect a cable to a terminal or terminals. Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device. Refer to page 37 for connecting a PC to the TV.
The cables illustrated in pages 16_18 are commercially available items.
Video connections HDMI connection
Example of connectable devices
E DVD player/recorder E Blu-ray player/recorder E Game console The HDMI connections permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. Analogue/digital conversion is no longer necessary in the connected devices, which also would result in quality losses.

DVI/HDMI conversion

Using a DVI/HDMI cable, the digital video signals of a DVD can also be played via the compatible HDMI connection. The sound must be fed in additionally.
When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in clearly. Both HDMI and DVI use the same HDCP copy protection method.
E When using the HDMI 2 terminal
You must set the audio signal input source depending on the type of HDMI cable connected (refer to page 25 for details). HDMI-certified cable
Go to MENU > Option > PC audio select > select EXT 4 (RGB).

DVI/HDMI cable

Go to MENU > Option > PC audio select > select HDMI 2.
If a connected HDMI device is AQUOS LINK compatible, you can take advantage of versatile functions (Pages 19_21). Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified HDMI cable. When playing the HDMI image, the best possible format for the picture will be detected and set automatically.

Go to MENU > Option > AQUOS LINK setup > select the menu you want to set.

AQUOS LINK control

Set to On to enable HDMI CEC functions.
Press a/b to select the input source of the connected HDMI device you want to control using the TVs remote control unit, and then press ;. Press c/d to select On, and then press ;.

Auto power on

If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.

Using genre info

This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast.
The factory default for this item is Off.

Selecting recorder

Here, you can select a recorder for the recording from several connected recorders.
If you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS recorder, the external sources indication changes (e.g., from HDMI 1 to HDMI 1 (Sub)).

LC-LE705E_GB.indd 20

Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI-connected device with a single remote control unit.

Setup menu

You can call up the menu of an HDMI CEC-compatible external device (player, recorder, decoder, etc.) using the Setup menu function.
Open the remote control units flip cover. Press PLAY I to start playback of a title.
See the right column, section Top menu/Title list if you want to start playback using the list of the titles of the AQUOS BD player/AQUOS recorder.
Press a/b to select Setup menu, and then press ;.
If a connected device does not have this function or the device is in a status where the menu cannot be displayed (recording, entering standby, etc.), this function may not be available.
Press FWD J to fast forward. Press REV G to reverse. Press STOP H to stop. Press B to turn the HDMI-connected device on/off.

Top menu/Title list

This section explains how to play back a title in the AQUOS BD player/AQUOS recorder.

AQUOS LINK menu

AQUOS LINK menu allows you to arrange the settings for the sound or external devices, etc.
Press a/b to select Top menu/Title list, and then press ;.
The linked recorder now powers on and the TV automatically selects the appropriate external input source. The title list data from the connected AQUOS BD player/ AQUOS recorder displays.

Film mode

Automatically detects a film-based source (originally encoded at 24 or 25 frames per second, depending on the vertical frequency), analyses it and then recreates each still film frame for high-definition picture quality (Advanced (High), Advanced (Low), Standard, Off).

AV MODE

AV MODE gives you several viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of programme watched or the type of image input from external equipment.

Active contrast

Automatically adjusts the contrast of an image according to the scene.

Gamma adjustment

Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of e 2 to a minimum of f 2.
Press #. Each time you press #, the mode changes.
You can also switch the mode on the Picture and Audio menu screen by pressing #. Item
DNR produces a clearer image (Off, High, Middle, Low, Auto).
STANDARD MOVIE GAME PC* USER
For a highly defined image in a normally bright room. For viewing a movie in a darkened room. For playing of video games. For PC. Allows you to customise settings as desired. You can set the mode for each input source. For a clear-cut image emphasising high contrast for sports viewing (the Picture and Audio settings cannot be adjusted). For a clear-cut image emphasising high contrast for sports viewing. The TV automatically sets the appropriate selection from the AV MODE menu depending on the lighting conditions and the type of programme watched.
This function may not be available depending on the input signal type.

3D-Y/C

DYNAMIC (Fixed)
Provides high quality images with minimal dot crawl and cross colour noise by detecting changes in the image.
Item Standard Fast Slow Normal adjustment. Sets the optimum image quality for fastmoving images. Sets the optimum image quality for slow-moving images. AUTO DYNAMIC

NOTE NOTE

3D-Y/C may not operate depending on the input signal type or when the input signal is noisy. 3D-Y/C has even more effect on composite video signals (CVBS). The item marked with * is available only when selecting HDMI 1, HDMI 2, HDMI 3, HDMI 4 or EXT 4 from the INPUT SOURCE menu. If you select AUTO, some selections in the AV MODE menu may not be automatically set.

EXAMPLE

OPC Backlight Contrast [Off]

ECO picture control

This function automatically detects the image source and decreases the power consumption while keeping the brightness of the image unchanged.
When OPC is set to On or On:Display, an Energy save status icon appears to the left of OPC in the Picture menu. When OPC is set to Off, an Energy save status icon appears to the left of Backlight in the Picture menu.
This function does not work when AV MODE is set to DYNAMIC (Fixed) or AUTO. This function does not work when Energy save is set to Standard or Advanced.
STEREO Subtitle New information

No signal off

When set to Enable, the TV will automatically enter standby mode if there is no signal input for 15 minutes.

Energy save

This function enables you to reduce the backlight brightness in order to decrease the power consumption and increase the backlight life span as shown in the following table.
Item Standard Advanced Reduces the backlight brightness. Reduces the backlight brightness more than Standard. The backlight brightness is the same value of your settings in the selected AV MODE.
Even if a TV programme finishes, this function may not operate because of interference from other TV stations or other signals.

No operation off

The TV will automatically enter standby mode if no operations are performed during the time span you set (30 min. or 3 hr.).
This function does not work when AV MODE is set to DYNAMIC (Fixed).
Five minutes before the TV enters standby mode, the remaining time displays every minute.
E Energy save status icons
Icon Description Energy save is set to Standard. Energy save is set to Advanced.

Sleep timer

Allows you to set a time when the TV automatically enters standby mode.
Select Off to cancel the sleep timer. When the time has been set, countdown automatically starts. Five minutes before the preset of time expires, the remaining time displays each minute.
When Energy save is set to Standard or Advanced, Energy save status icons appear in the Picture menu and channel information windows as shown in the following examples.

LC-LE705E_GB.indd 26

2009/10/09 14:13:09
Channel settings Auto installation

Programme setup

You can reconfigure the DTV service settings automatically or manually.

Auto installation

The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting for digital and analogue individually and reconfigure the settings after the initial auto installation has been completed.

Refer to page 22 for menu operation using @ on the TV.
To view a locked channel, you must enter the PIN (see pages 28 and 29 for locking channels from viewing in DTV and ATV mode). When you select a locked channel, a PIN prompt message pops up. Press 6 to display the PIN input window.

Quick start

You can reduce the TVs start-up time after turning on the power with the remote control unit.
Item On The TV quickly starts up from standby. 30 W or more of power consumption is required during standby. Power consumption is small during standby.

Cancel PIN

Allows you to reset your PIN.
As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach.

Parental rating

This function allows DTV services to be restricted. It prevents children from watching violent or sexual scenes that may be harmful.

Blue illumination

The LED on the front of the TV is blue when illuminated.
Universal viewing and Parental approval pref. are ratings used exclusively in France. Refer to page 47 for details about ratings.
The factory default for this item is On. Set to Off if you do not want the LED to illuminate.

LC-LE705E_GB.indd 30

2009/10/09 14:13:13

Useful viewing functions

Selecting the picture size Selecting the WSS picture size automatically
Selecting the picture size manually
You can select the picture size. Selectable picture size varies with the type of signal received.
Item (for SD [Standard-Definition] signals) Keeps the original aspect ratio in a full screen display. For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes. In this mode, the picture is stretched toward each side of the screen. The picture may appear similar to Full depending on broadcast signals. For 16:9 squeeze pictures. For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

This function allows you to display the clock time in the lower-right corner of the screen.

DTV mode

ATV mode
Audio (ENG) STEREO Video Subtitle New information STEREO Subtitle New information
Item On On (half-hourly) Off Displays the clock time. Displays the clock time in 30-minute increments. Hides the clock time.
Four digit numbers (e.g., 0001) are displayed after selecting the five Nordic countries in the country setting.
E Time display in channel information
You can display the time information included in DTV and teletext broadcasts.

Time format

You can select the time format (either 24HR or AM/ PM) for the clock time.
Skip step 1 if receiving DTV broadcasts.
Select a TV channel (the time information is automatically captured). Press p. The channel display will appear on the TV. Press p again within the several seconds that the channel display is on the screen. Time information will be shown in the lower-right corner of the screen for several seconds. Even when you change the TV channel, you can display the time information with steps 2 and 3 above.

Game play time

This function allows you to display the elapsed time on the screen when AV MODE is set to GAME.
Item Under connecting a game console to the TV, the elapsed time is displayed in 30-minute increments after you start playing a game. Hides the time.
If acquired successfully, the time information will appear in the upper-right corner of the screen by pressing @.
This menu is not selectable if the input source is TV or USB.

Programme title display

This function allows you to display programme information such as the title and airtime by tuning a channel.
This function is available only when the DTV mode is selected.

LC-LE705E_GB.indd 33

2009/10/09 14:13:16

Other useful features

Setting when using external devices Input source settings
Skipping specified inputs

Input skip

This setting allows you to skip the SCART, HDMI or RGB input on the input source selection operation.
EXT 1 (SCART) EXT 2 (SCART) EXT 4 (RGB) HDMI 1 HDMI 2 HDMI 3 HDMI 4 Yes No

Input select

For setting the signal type of external equipment.
Item EXT 1 EXT 2 Y/C, CVBS, RGB Y/C, CVBS
If no (colour) image displays, try changing to another signal type. Check the operation manual of the external equipment for the signal type.

Digital (HDMI)

VESA standard

VGA, SVGA, XGA, WXGA, SXGA and SXGA+ are registered trademarks of International Business Machines Corporation.
This TV has only limited PC compatibility, correct operation can only be guaranteed if the video card conforms exactly to the VESA 60 Hz standard. Any variations from this standard will result in picture distortions.

LC-LE705E_GB.indd 38

2009/10/09 14:13:21
RS-232C port specifications

PC control of the TV

When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. Use an RS-232C serial control cable (cross type) (commercially available) for the connections.

Command format

Eight ASCII codes +CR

C1 C2 C3 C4 P1 P2 P3

characters.
Command four digits: Command. The text of four Parameter four digits: Parameter 0_9, blank, ?,
This operation system should be used by a person who is accustomed to using PCs.

Return code (0DH): ?

Parameter
Input the parameter values, aligning left, and fill with blank(s) for the remainder (be sure that four values are input for the parameter). When the input parameter is not within an adjustable range, ERR returns (refer to Response code format).
RS-232C serial control cable (cross type)

Communication conditions

Set the RS-232C communications settings on the PC to match the TVs communications conditions. The TVs communications settings are as follows:
Baud rate Data length Parity bit Stop bit Flow control 9,600 bps 8 bits None 1 bit None
When ? is input for some commands, the present setting value responds.

Communication procedure

Send the control commands from the PC via the RS232C connector. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command. Make sure to send A with the carriage return and confirm that ERR returns before operating.

Response code format

Normal response
Return code (0DH) Problem response (communication error or incorrect command)

Return code (0DH)

LC-LE705E_GB.indd 39

RS-232C command list

CONTROL ITEM POWER SETTING INPUT SELECTION A COMMAND P I I I I CHANNEL D C C D O W R T T D A C H H T G V T V C U D D V D H P PARAMETER 0 _ _ _ * * _ _ * _ _ _ _ _ * _ _ * _ _ _ _ _ _ _ _ * _ _ _ _ _ _ _ _ _ CONTROL CONTENTS POWER OFF (STANDBY) INPUT SWITCHING (TOGGLE) TV (CHANNEL FIXED) DTV (CHANNEL FIXED) EXT 1_4, 9 (1_4, 9), HDMI 1_4 (5_8) TV DIRECT CHANNEL (1_99) CHANNEL UP CHANNEL DOWN THREE DIGIT DIRECT CHANNEL (1_999) (NonNordic countries) FOUR DIGIT DIRECT CHANNEL (1_9999) (Nordic countries only) DTV CHANNEL UP DTV CHANNEL DOWN EXT 1 (Y/C) EXT 1 (CVBS) EXT 1 (RGB) EXT 2 (Y/C) EXT 2 (CVBS) TOGGLE STANDARD MOVIE GAME USER DYNAMIC (Fixed) DYNAMIC PC AUTO 1_7, 100 VOLUME (0_60) TEXT T T D E E C X X P T T G * _ _ * _ _ * _ _ _ O O F F T T M M _ _ _ _ _ _ AUDIO CHANGE SLEEP TIMER SURROUND MUTE WIDE MODE CONTROL ITEM POSITION COMMAND H V C P W W W W W W W W W W W W M M M A A A A O O O O P P L H I I I I I I I I I I I I U U U C C C C F F F F O O C S D D D D D D D D D D D D T T T S S S H T T T T S S K E E E E E E E E E E E E E E E E U U U A M M M M PARAMETER * * * * _ * * * * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ * * * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ CONTROL CONTENTS H-POSITION (AV/PC) V-POSITION (AV/PC) CLOCK (0_180) PHASE (0_40) TOGGLE (AV) NORMAL (AV) ZOOM 14:9 (AV) PANORAMA (AV) FULL (AV) CINEMA 16:9 (AV) CINEMA 14:9 (AV) NORMAL (PC) CINEMA (PC) FULL (PC) DOT by DOT (AV/PC) UNDERSCAN (AV) TOGGLE MUTE MUTE OFF SURROUND TOGGLE SURROUND ON SURROUND OFF TOGGLE OFF SLEEP TIMER 30 MIN SLEEP TIMER 1 HOUR SLEEP TIMER 1 HOUR 30 MIN SLEEP TIMER 2 HOUR SLEEP TIMER 2 HOUR 30 MIN TEXT OFF TEXT ON (TOGGLE) DIRECT PAGE JUMP (100_899)

This operation may take a while.
The TV starts updating the system
Be sure to insert the USB device correctly into the terminal.
A confirmation message appears on the screen after completing the update and then automatically restarts the TV. Press ; to complete the operation.
Information on the software license for this product
Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties. These include software components covered by a GNU General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement. Obtaining source code Some of the open source software licensors require the distributor to provide the source code with the executable software components. GPL and LGPL include similar requirements. For information on obtaining the source code for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website: http://www.sharp-eu.com/gpl/ We are unable to answer any questions about the source code for the open source software. The source code for the software components whose copyrights are held by SHARP is not distributed. Acknowledgements The following open source software components are included in this product: linux kernel busy box uClibc zlib libpng libjpeg mtd-utils

LC-LE705E_GB.indd 43

2009/10/09 14:13:25

Specifications

Item LCD COLOUR TV (32 o), LC32LE700E, LC-32LE700S, LC-32LX700E, LC-32LU700E, LC-32LU700S, LC-32LE705E, LC-32LE705S, LC-32LX705E, LC32LU705E, LC-32LU705S Advanced Super View & BLACK TFT LCD (32 o) 2,073,600 pixels (1,920 x 1,080) PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 Analogue Digital Receiving channel TV-tuning system STEREO/BILINGUAL Audio amplifier Speaker Terminals Antenna RS-232C EXT 1 EXT 2 EXT 3 EXT 4 HDMI 1 (EXT 5) HDMI 2 (EXT 6) HDMI 3 (EXT 7) HDMI 4 (EXT 8) EXT 9 USB HDMI 2/PC AUDIO (R/L) DIGITAL AUDIO OUTPUT C. I. (Common Interface)

OUTPUT

LCD COLOUR TV (40 o), LC40LE700E, LC-40LE700S, LC-40LX700E, LC-40LU700E, LC-40LU700S, LC-40LE705E, LC-40LE705S, LC-40LX705E, LC40LU705E, LC-40LU705S Advanced Super View & BLACK TFT LCD (40 o)
LCD panel Resolution Video colour system TV function TV-standard

The HDMI 2 and EXT 4 terminals can both use the same audio input terminal. J Standby power consumption applies when the TV is set to not receive EPG data. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Refer to the inside back cover for dimensional drawings.

LC-LE705E_GB.indd 45

Environmental specifications
Item I On-Mode (W) (HOME MODE) Advanced 32 inch models 60 W 54 W 0.20 W Power button L Off Mode (W) M Annual Energy Consumption (kWh) Annual Energy Consumptioning N Energy-Save-Mode (kWh)

I J K L M N

40 inch models 72 W 70 W 0.20 W 0.19 W 0.01 W or less 105.1 kWh 102.2 kWh
46 inch models 89 W 81 W 0.20 W 0.19 W 0.01 W or less 129.9 kWh 118.3 kWh
52 inch models 98 W 92 W 0.20 W 0.19 W 0.01 W or less 143.1 kWh 134.3 kWh
J Energy-Save-Mode (W) K Standby-Mode (W)
0.19 W 0.01 W or less 87.6 kWh

MAIN POWER switch

78.8 kWh
Measured according to IEC 62087 Ed. 2 For further information about the Energy Save function, please see related pages in this operation manual Measured according to IEC 62301 Ed. 1 Measured according to IEC 62301 Ed. 1 Annual energy consumption is calculated on the basis of the On-Mode (HOME MODE) power consumption, watching TV 4 hours a day, 365 days a year Annual energy consumption is calculated on the basis of the Energy-Save-Mode power consumption, watching TV 4 hours a day, 365 days a year
The power consumption of On-Mode varies depending on the images the TV displays.

Optional accessories

The listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop.
Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. No. 5 Part name Wall mount bracket (32 inch models) Wall mount bracket (40 inch models) Attachment (40 inch models) Wall mount bracket (46 inch models) Wall mount bracket (52 inch models) Part number AN-37AG5 AN-37AG2 AN-37P30 AN-52AG4 AN-52AG4 Notes The centre of the TV screen is 5 mm below the mark B on the wall bracket. The centre of the TV screen is 20 mm below the mark B on the wall bracket. The centre of the TV screen is 1.3 mm below the mark b on the wall bracket. The centre of the TV screen is 1.75 mm below the mark b on the wall bracket.

LC-LE705E_GB.indd 46

Rating table for child lock