Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding it with two hands one hand on each side of the TV.

Trademarks

HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. truD is a registered trademark of Micronas in Germany and other countries. The HD ready Logo is a trademark of EICTA.

LC-42XD1E_gb_a.indd 2

2006/10/27 10:21:20

Supplied accessories

Remote control unit (g1) AC cord (g1) Cable tie (g1)

Stand unit (g1)

Cable clamp 3 RCA to 15-pin (Small g1, Large g1) D-sub adapter (g1)

Pages 6 and 7

Product shape varies in some countries. Page 4

Page 4

Page 3

Page 10

AAA size battery (g2)..Page 6
Operation manual (This publication)

Quick guide

Attaching the stand
Before performing work spread cushioning over the base area to lay the TV on, making sure the area is completely at. This will prevent it from being damaged. Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
CAUTION Attach the stand in the correct direction. Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Conrm that there are 8 screws (4 short screws and 4 long screws) supplied with the TV.
1 Insert the stand into the openings on the bottom of the TV. 2 Insert and tighten the 4 long screws into the 4 holes on the rear of the TV.

Hex key

Long screw
Attach the two parts of the stand unit to each other using the 4 screws and the hex key (supplied with the product) as shown.

Soft cushion

Short screw
Hex key NOTE To detach the stand, perform the above steps in reverse order.

LC-42XD1E_gb_a.indd 3

2006/10/27 10:21:21

Setting the TV

Place the TV close to the AC outlet, and keep the power plug within reach.
Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable

Ferrite Core *

Cable clamp (large)

Delete

Select a station to delete, and then press Red (Delete). Mark more stations with a/b/c/d or , if desired. Conrm with OK or cancel with Red. Move Select a station to move, and then press Yellow (Move). Mark more stations with a/b/c/d or , if desired. Press OK to nish marking. to select the Press a/b/c/d or position to move to. Conrm with OK or cancel with Yellow.
Make sure to select the appropriate block of channels or destination when moving.
Rename Select a station to rename, and then press Blue (Rename). Press any of the numeric buttons to select the desired character. Remember to press and toggle the numeric button quickly, for the transition to the next digit is rather quick. Repeat until the new name is fully spelt out. Conrm with OK or cancel with Blue.
The name can be up to 8 characters.

LC-42XD1E_gb_a.indd 9

Using external equipment
Setting the input source To view external source images, select the input source using b on the remote control unit. (Page 19)
INPUT SOURCE TV DTV EXT1 EXT2 EXT3

Connecting a DVD player

You can use the EXT 3, 4, 5 (HDMI) or 6 (HDMI) terminals when connecting to a DVD player and other audiovisual equipment.
AUDIO cable* S-video cable* or
NOTE EXT4 The cables marked with * are EXT5 commercially available items. EXT6 TV-OUT from EXT 1 outputs DTV image when DTV is selected as the input. Otherwise it constantly outputs analogue TV image. MONITOR OUTPUT from EXT 2 outputs audio only when EXT 4, 5 and 6 is selected as the input.

Connecting a VCR

L-AUDIO-R S-VIDEO AV OUTPUT VIDEO
You can use the EXT 2 terminal when connecting a VCR and other recording equipment. If your VCR supports TV-VCR advanced AV Link systems, you can connect the VCR using the fullywired SCART cable.
SCART cable* SCART cable*
Composite video cable* EXT 3

DVD player

NOTE EXT 3: The S-VIDEO terminal has priority over the VIDEO terminals. Component cable*
COMPONENT PB (CB) PR (CR)
3 RCA to 15-pin D-sub adapter (Supplied)

VCR EXT 2 (recommended)

Decoder
NOTE If the above is your connection, make sure to select EXT 2 under the menu item Decoder when you run the Initial auto installation (Analogue) (Page 8) or when changing the setting later (Page 15). TV-VCR advanced AV Link systems may not be compatible with some external sources.

3.5 mm stereo minijack cable*
HDMI-DVI conversion adapter/ cable*
Connecting a game console or camcorder
A game console, camcorder and some other audiovisual equipment are conveniently connected using the EXT 3 terminals.
When using an HDMI-DVI conversion adapter/cable, input the Audio signal here. EXT 5 If not, use EXT 6. DVD player

HDMI cable*

NOTE When connecting an HDMI-DVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.
Game console Camcorder NOTE EXT 3: The S-VIDEO terminal has priority over the VIDEO terminals.

LC-42XD1E_gb_a.indd 10

2006/10/27 10:21:35

Connecting a decoder

You can use the EXT 1 terminal when connecting a decoder and other audiovisual equipment.

Using AV Link function

This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual equipment.

One Touch Play

SCART cable*
While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source (e.g. VCR, DVD).

TV Standby

NOTE If the above is your connection, make sure to select EXT 1 under the menu item Decoder when you run the Initial auto installation (Analogue) (Page 8) or when changing the setting later (Page 15).
When the TV enters standby mode, the connected audiovisual equipment (e.g. VCR, DVD) enters standby mode as well.
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start recording by pressing the WYSIWYR button.

Connecting a PC

Use the EXT 4 terminals to connect a PC.

PC RGB cable*

Preset Download
Automatically transfers the channel preset information from the tuner on the TV to the one on the connected audiovisual equipment (e.g. VCR) via the EXT 2 terminal.
NOTE Refer to operation manuals of each external equipment for the details. Only works when the audiovisual equipment is connected to the EXT 2 terminal on the TV with AV Link via a fully wired SCART. The use of the AV Link function is only possible if the TVset has enforced a complete auto-installation with the connected audiovisual equipment (Page 8, initial auto installation). The availability of the AV Link function depends on the audiovisual equipment used. Depending on the manufacturer and type of equipment used, it is possible that the described functions may be completely or partially unusable.
PC RGB/DVI conversion cable* EXT 4
NOTE The cables marked with * are commercially available items. The PC input terminals are DDC1/2B-compatible. Refer to page 34 for a list of PC signals compatible with the TV. Macintosh adaptor may be required for use for some Macintosh computers. When connecting to a PC, the correct input signal type is automatically detected.

Antennas with an integrated amplier need a supply voltage on the antenna line. (Page 4)

Setup menu

You can search for stations automatically or manually as well as set the menu language, time and date, child lock, on-screen displays, etc.
TV menu Setup Channels Child lock Auto format Language Factory settings Miscellaneous on Geometry

AV-Link (EXT 2 only)

With this function you can transfer the station data of the TV (such as station preset number/name/channel/ frequency) to the recorder if the recorder is set up for AV-Link. This function is available only for conventional analogue stations.
Press MENU and the menu screen displays. Press c/d to select Connections, and then press OK. Press a/b to select AV-Link, and then press OK. Select Start transmission, and then press OK.
The TV transfers the station list to the AV-Link recorders connected to EXT 2.

Channels

The menu contains the automatic station search and the manual station settings. You can re-sort stations, enter and change station names, and delete stations. E Search wizard Use this menu to search for stations automatically once certain settings have been made. (See page 8, Initial auto installation (Analogue) for details.)

Miscellaneous

E Decoder stations Encrypted stations should be labelled as decoder stations, so that they can be decoded automatically by the connected decoder.
Items Select decoder station(s) Description Press OK to mark an encoded station. The marking can be removed from a station that has already been marked by pressing the same key. For reception of encoded audio signals select either always if these are always encoded or Automatic if these are sometimes encoded. For audio signals which are always uncoded, select never.
Press MENU and the TV menu screen displays. Press c/d to select Setup, and then press OK. Press a/b to select Channels, and then press OK. Press a/b to select Search wizard, and then press OK.
You will get a table for the auto station search.

Sound encoding

If necessary select Change search settings, and then press OK. Otherwise skip to step 8. Press a/b/c/d to select your country or area listed on the screen, and then press OK. Indicate whether you wish to have all stations or new ones only searched for using c/d, and then press OK. Select the desired TV/colour standard, and then press OK. Specify from which station position onwards the stations are to be stored, and then press OK. Press a/b to select Start search, and then press OK.

E Manual adjustment of AV standard Ask your dealer which standard to select for specic AV equipment (if it is not recognised automatically). Select the appropriate external terminal (EXT 1- 3) and its AV standard as advised. E Allow switching voltage If this function is activated and you switch to an AV device (connected to EXT 1 or 2) that delivers switching voltage to playback, its picture and sound will be reproduced immediately at all TV presets. (This function is available only for analogue TV and DTV mode.)
NOTE The station search may take some time. Do not make any entries or switch off the set during this time. When the search has ended you will be shown the found and stored stations sorted in numerical order. After the station search has been completed, close the table by pressing END.

LC-42XD1E_gb_b.indd 16

2006/10/27 10:22:07
E Manual tune Use the manual tune option when receiving TV signal whose TV/Colour standard deviate from the one specied already. However, this requires detailed knowledge.

Child lock

With the child lock you can bar access to all stations immediately or daily for a certain time period. To use this function, you have rst to dene your PIN.
NOTE To view a locked channel, you must enter the PIN. (See page 28 for locking channels from viewing in DTV mode.) The TV power will be turned off if no PIN is entered for several seconds.
Press MENU and the TV menu screen displays. Press c/d to select Setup, and then press OK. Press a/b to select Channels, and then press OK. Press a/b to select Manual tune, and then press OK. Now enter the necessary setting parameters for each menu item.
For Channel and Frequency, you can initiate the search by pressing Blue (Search) or simply enter the number if you know it. For items TV stand. and Col. standard, you must rst press OK (Adopt) to conrm the change.
E Lock immediately You can lock out all stations immediately by selecting yes. The lock is effective immediately and effective whenever you turn on the TV. E Lock daily Here, enter the daily time period, for which your TV set is to be locked. E Change PIN This allows you to change your PIN.
NOTE When in analogue TV mode, the current PIN becomes invalid if you choose no for both Lock immediately and Lock daily. As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach. See page 33 if you lose or forget your PIN.
When you have nished the adjustments, press Red (Store) to store the new settings. Next, select the channel position to store the new settings. Press Red to overwrite the current station or Blue to insert the new channel.
Channel: You can enter the channel number directly here. Press c/d to move between the receiving channel modes. Frequency: You enter the frequency directly using the numeric buttons. For ne tuning, use the c/d buttons. Fine tuning may be necessary for analogue channels or for recorder playback via the antenna connection. Name: You can enter an 8-character channel name. Refer to page 9 for the character input method. TV stand.: Ask your dealer which standard to select for specic channels or AV equipment. (B/G, I, L, D/K) Col. standard: Ask your dealer which standard to select for specic channels or AV equipment. Selectable colour standard varies depending on the selected TV standard. (Auto, PAL, SECAM)

Press f or a/b while the Wide modes menu displays on the screen.
As you toggle down the options, each is immediately reected on the screen. No need to press OK. Item (for SD (Standard) signal)

Normal

Full: For 16:9 squeeze pictures. Normal: For 4:3 standard pictures. A side bar appears on each side. Panorama: In this mode the picture is progressively stretched toward each side of the screen. Cinema 16:9: For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Cinema 14:9: For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Item (for HD (High-Denition) signal) Full: Display with the Overscan image. Crop all sides of screen. Underscan: Display with the Underscan image. (Display with the High-Denition image compressed optimally. Noise may appear on the edge of the screen with some programmes.)
Full: An image fully lls the screen. Normal: Keeps the original aspect ratio in a full screen display.

LC-42XD1E_gb_b.indd 20

2006/10/27 10:22:13

Analogue Teletext

What is Teletext?
Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available.
Using analogue teletext menu
While in the analogue teletext mode, press MENU to display the Teletext Menu.
Menu Newsflash Reveal Setup

Newsash

If you activate Newsash in the teletext menu, the current page is hidden. The m symbol at the top left shows that the newsash function is enabled (you are in teletext mode). If its contents are updated and it is a small news window, then this is displayed. If, however, it is a page that lls the screen, the symbol is shown in blue and the page can be displayed by pressing OK.
Turning on and off Teletext
Select a TV channel or external input source providing the Teletext programme. Press m to display the Teletext.

DTV common operations

DTV common menu operation
Press DTV or b to access the DTV mode. Press DTV MENU and the DTV Menu screen displays. Press c/d to select the desired menu, and then press OK if necessary.
From this point, menu operations differ depending on the item you are going to adjust. See the respective section of the menu operation. You cannot select any DTV-related menu items unless Auto Installation has been completed. Press RADIO to switch between DTV and Radio mode. To exit the current screen without saving the change, press END.

LC-42XD1E_gb_c.indd 23

2006/10/27 10:22:33
About using the character set screen
In some cases you may be prompted to enter characters. See below for details. Sample Alpha Numerical Character Set screen
Alpha Numerical Character Set
Select language settings for audio (if a programme is broadcast in more than one language) and MHEG5 service.
Press OK while the cursor is on Language. Press a/b to select 1st Pref. Audio, 2nd Pref. Audio, 3rd Pref. Audio or MHEG. Select a desired language for each item.

+ 6 A L W b m x

FAV ! , 7 B M X c n y ~ 8 C N Y d o z Select

0.9 OK END

#. 9 D O Z e p

$ / ; E P [ f q

% 0 : F Q \ g r

& 1 < G R ] h s

2 _ H S ^ i t

( 3 > I T ` j u

) 4 ? J U = k v

* 5 @ K V a l w

NOTE See page 17 to change the language displayed on-screen. See page 32 to change the subtitle language. See page 32 for details on the MHEG5 service. 3 Available language list Greek Basque Italian Catalan Norwegian Croatian Polish Czech Portuguese Danish Russian Dutch Serbian English* Slovak Finnish Spanish French Swedish Gaelic* Turkish Gallegan Welsh* German * Languages available for MHEG5 service
Input area Space To add or overwrite with a space. Character select area YELLOW (Select) button Press to move between the input area and character select area. a/b/c/d button Press to move the cursor. OK button While in the input area: Conrms the new name. Once OK is pressed to conrm, a conrmation message displays. Press c/d to select Yes, and then press OK. While in the character select area: Conrms the input of a character.

Erase the selected service(s) from the memory.
Press a/b to select the desired service. Press on the remote control. An icon displays indicating the service to be erased.
Pressing will turn the erase icon on and off. Do not press END to exit the screen here if you wish to register the change.

Carrier Scan

Manually add a new carrier by entering the desired carrier number or frequency band.
Press c/d to select Installation. Press a/b to select Carrier Scan, and then press OK. If you have already set the PIN, enter it here. If not, enter the factory preset PIN 1234.
Change individual service names.
Press a/b to select the desired service. on the remote control. A character set Press screen displays. Enter new name for the service. See page 24 for operations using the character set screen.

Channel Frequency (kHz)

Ch-35 554000
Tune to the service shown in the picture window.
Press a/b to select Channel, then c/d to enter the carrier number, and then press OK.
The frequency of the selected carrier in the below cell changes correspondingly.
Press a/b to select the desired service. Press on the remote control.
The image shown in the picture window changes.
After the scan is complete, the screen shows all available services for the selected range. A conrmation message displays. Press c/d to select Yes, and then press OK to save the change.
Press END to exit the Programme Setup screen to view the image in full screen.
NOTE You can directly enter the frequency instead of step 3. In this case, select Frequency (kHz), enter the number using numeric buttons, and then press OK. Use c/d to move between the digits. After performing Carrier Scan, the order stored by using the Move function will revert to the default order. See page 17 for setting the PIN.

LC-42XD1E_gb_c.indd 26

2006/10/27 10:22:41

Carrier Setup

This is provided for you to rename (label), erase, or rescan carriers. Carrier in this context refers to a service station that provides a set of individual services.

System Setup

Congure On-Screen Display and Child Lock settings.

OSD Setup

The On-Screen Display appearance and the position/ duration of the service banner information can be customised.
Press c/d to select Installation. Press a/b to select Carrier Setup, and then press OK. If you have already set the PIN, enter it here. If not, enter the factory preset PIN 1234.

Press OK while the cursor is on Common Interface.
The CI module name is displayed.

CI Module

Module Name

IRDETO

Press OK to access the CI menu.
Detailed information on the CI card in use is displayed.
CA card Common Interface Module
Press a/b to select the item, and then press OK.
Detailed information on the selected item is displayed.
When the compatible card is not inserted: 1 Select the programme which needs the compatible CA card. The caution screen appears. 2 Insert the compatible CA card. The caution screen disappears and you can view the programme. CA system supported by Crypto Works Aston CAM VIAccess Nagra Vision Irdeto MR CAM NOTE To view paid TV broadcasting, you need to make a contract with a service provider. Please contact a service provider for details. The Common Interface Module and the CA card are neither supplied nor optional accessories.
Supplying power to the antenna
You may choose to supply power through the antenna terminal. (Page 4)
NOTE This function is enabled using the Analogue Menu. See page 16 for details.

LC-42XD1E_gb_c.indd 29

About EPG
With the Electronic Programme Guide (EPG), you can check the schedule of DTV and Radio events, view detailed information about them, tune to an event currently on-air and set a timer for future events. General EPG screen
EPG 070 BBC News The Bold and Beautiful
To watch an event currently on-air, press OK (OK/Timer).
The TV will show the image in full screen. Selecting an event that has not yet started will activate the EPG Timer mode instead.
Sun 16/04/2005 07:05:11 16/04/2005
NOTE Pressing p opens the EPG Description screen that provides more information about the selected event. Press p or END to exit.

Using the EPG Timer

When the Timer is set, the TV automatically tunes to a preset TV event when its on-air time begins.

07:00 07:30

Services BBC News BBC 1 BBC 2 CBBC Channel

LC-42XD1E_gb_c.indd 30

2006/10/27 10:22:45

Using the ESG

The Electronic Service Guide (ESG) is a simplied version of EPG, giving you only essential information of current events for faster access.

Viewing a service banner

A service banner shows event names, start/end time of event, and other useful information.

Press p.

Press ESG.

The ESG screen displays.

ESG 070 BBC News The Bold and Beautiful Current Event The Bold and Beautiful *** *** *** Sun 16/04/2005 07:05:11

Service banner

16/04/2005
BBC 1 07:00 08:00 Business news
07:00 07:30 Services BBC News BBC 1 BBC 2 CBBC Channel

07:45 04/11/2005 MHEG

OK DTV MENU i+

END RADIO

Press a/b to select a desired service, and then press OK.
The TV will show the image in full screen.
NOTE Basic operation procedures are similar to EPG operations. ESG does not provide information about future events, or access to Timer function.
Using the digital programme list
Select services by using the Programme List instead of numeric buttons or P (s/r). using
Press LIST or OK when no other menu screen is displayed. (Except external input.)

Programme List

Logical channel number Service name Carrier name Favourite type Teletext available Subtitle available Lock status Scrambled service Multi audio status Current event name Current date and time MHEG5 service available
Services CBBC Channel BBC News BBC 1 BBC 2 Canal + UK Gold

Fav Type

S.No 005 006
To display more detailed information, press p again.
You can verify the signal strength and quality of the selected service here.

Carrier Freq FFT GI QAM

BBC 538000 kHz 8K 1/8 64
Currently tuned service Service shown in picture window
The screen shows the service list in either TV or Radio mode sorted by favourite type (All, Fav 1 - 4) as congured in page 25. Press a/b to select the desired service, and then press OK.
Press END to exit the Programme List to watch the image in full screen.

LC-42XD1E_gb_c.indd 31

2006/10/27 10:22:47
Using the multi audio function
Change the audio mode and language for the currently viewed service.
Using the MHEG5 application (UK only)
Some services bring you programmes with the MHEG (Multimedia and Hypermedia Expert Group) application encoded, letting you experience DTV interactively. When provided, the MHEG5 application will start when you press m. Sample MHEG5 screen

Press 2 when no other menu screen is displayed.
Multi Audio Audio Mode S.No Language Code Eng Fre Ger Fin Stereo Audio Type MPEG2 MPEG2 MPEG2 MPEG2 PID 1213 1214
Press c/d to select the desired audio mode (Left, Right, L+R, Stereo), and then press b to move down. Press a/b to select the desired language available for the service, and then press OK.
NOTE When Subtitle is set to On, and the TV is tuned to a service containing both MHEG5 and subtitle data, the subtitle takes priority and subtitle presentation starts automatically. In this case press m to start the MHEG5 presentation.
NOTE Once you tune to another service or the power is turned off, the setting returns to the parameter set in the Language menu. (Page 24)

Displaying subtitles

Set the desired language for the subtitle display and enable/disable the subtitle display.
Press [ when no other menu screen is displayed.

Subtitle

Language Subtitle

English On

Press a/b to select Language, c/d to select the desired language available in the stream, and then press b. Select Subtitle, press c/d to select On or Off, and then press OK.
NOTE When Subtitle is set to On, the TV will automatically start subtitle presentation if tuned to a programme containing subtitle data. This function deactivates each time you turn off the TV. When you press [ while watching DTV broadcasts, the message No subtitle may appear instead of the Subtitle OSD screen as mentioned. (This happens depending on the type of programme and happens even when the TV is actually receiving the subtitle data.) In this case, press m rst to activate the teletext mode, then press [.

LC-42XD1E_gb_c.indd 32

2006/10/27 10:22:49

Appendix

Troubleshooting
Problem No power. Possible Solution Check if you pressed B on the remote control unit. If the indicator on the TV lights up red, press B. Is the AC cord disconnected? Check if you pressed a on the TV. External inuences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after rst turning the power off, or unplugging the AC cord and re-plugging it in after 1 or 2 minutes. Are batteries inserted with polarity (e, f) aligned? Are batteries worn out? (Replace with new batteries.) Are you using it under strong or uorescent lighting? Is a uorescent light illuminated to remote control sensor?

Unit cannot be operated.

Remote control unit does not operate.

Picture is cut off.

Is the image position correct? (Page 18) Are screen mode adjustments (Auto format) such as picture size made correctly? (Pages 17 and 20) Adjust the picture tone. (Page 13) Is the room too bright? The picture may look dark in a room that is too bright. Check the colour system setting. (Pages 16 and 17) Check the HDMI setup setting. (Page 15)

P O W R 0 I I I I T V D _ D T V _ A V D * * A V D ?

CHANNEL

D C C H
D C C H ? C H U P _ C H D W _ D T V D * D T V D ? D T U P _ D T D W _ INPUT SELECTION B I I I I I I I I I I I I I AV MODE SELECTION N P N P N P N P 1 ? N P N P N P 2 ? N P N P N P N P 4 ? N P N P 6 0
M U T E 0 M U T E 1 M U T E 2 M U T E ? A C S U 0 A C S U 1 A C S U 2 A C S U ? A C H A _ O F T M 0 O F T M 1 O F T M 2 O F T M 3 O F T M 4 O F T M 5 O F T M ? T E X T 0 T E X T 1 T E X T ? D C P G * D C P G ?
A V M D 0 A V M D 1 A V M D 2 A V M D 3 A V M D 4 A V M D 5 A V M D ?

VOLUME

V O L M * V O L M ?
NOTE If an underbar (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
Rating table for Child Lock
Broadcasted rating Useradjusted rating Universal Parental X-rated Broadcasted rating Useradjusted rating Universal Parental X-rated AGE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Universal

Parental

X-rated

LC-42XD1E_gb_d.indd 35

2006/10/27 10:23:12

Specications
Item LCD panel Number of dots Video Colour System TV Function TVStandard Receiving Channel Analogue Digital VHF/UHF CATV 37o LCD COLOUR TV, Model: LC-37XD1E 37o Advanced Super View & BLACK TFT LCD 6,220,800 dots (1920 g 1080 g 3 dots) PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 CCIR (B/G, I, D/K, L, L) DVB-T (2K/8K OFDM) E2E69ch, F2F10ch, I21I69ch, IR AIR Jch, (Digital: E5-E69ch) Hyper-band, S1S41ch Auto Preset 999 ch, Auto Label, Auto Sort NICAM/Acd/m2 60,000 hours (at Backlight Standard position) H : 176 V : 176 10W g 2 Antenna input RS-232C EXT 1 EXT 2 EXT 3 EXT 4 EXT 5 EXT 6 C. I. (Common Interface) OUTPUT Headphones OSD language Power Requirement Power Consumption Weight Operating temperature 15W g 2 (100 mm g 40 mm) g 2, 20 mm g 2 (100 mm g 40 mm) g 4 UHF/VHF 75 q Din type (Analogue & Digital) 9 pin MINI-DIN male connector SCART (AV input, Y/C input, RGB input, TV output) SCART (AV input/monitor output, Y/C input, AV Link) S-VIDEO (Y/C input), RCA pin (AV input) 3.5 mm jack (Audio input), 15 pin mini D-sub (PC/Component) HDMI, 3.5 mm jack (Audio input) HDMI EN50221, R206001 RCA pin (Audio) 3.5mm jack (Audio output) English/German/French/Italian/Spanish/Dutch/Swedish/Portuguese/Finnish/ Turkish/Greek/Russian/Polish AC 220240 V, 50 Hz 215W (2.4 W Standby) (Method IEC60107) 21.0 kg (Without stand), 24.5 kg (With stand) 0C to e40C 228 W (2.3 W Standby) (Method IEC60107) 29.5 kg (Without stand), 33.0 kg (With stand) 42o LCD COLOUR TV, Model: LC-42XD1E 42o Advanced Super View

TV-Tuning System STEREO/BILINGUAL Brightness Backlight life Viewing angles Audio amplier Speaker Terminals Rear
As a part of policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from these values in individual units. NOTE Refer to inside back cover for dimensional drawings.

Optional accessories

The listed optional accessories are available for the LCD colour TV. Please purchase them at your nearest shop.
Additional optional accessories may be available in near future. When purchasing, please read the newest catalogue for compatibility and check the availability. No. Part name Wall mount bracket LC-37XD1E LC-42XD1E Part number AN-37AG2 AN-37AG2/AN-52AG1 AN-A1RS
9 pin D-sub/MINI-DIN conversion cable

LC-42XD1E_gb_d.indd 36

2006/10/27 10:23:14
A. Information on Disposal for Users (private households) 1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details.
Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you dont purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www. sens.ch.

SHARP CORPORATION SHARP ELECTRNICA ESPAA S.A.
Polgono Industrial Can Sant Joan Calle Sena s/n 08174 SANT CUGAT DEL VALLS BARCELONA (ESPAA)
LCD ( ) TELEVISOR DE CRISTAL LQUIDO LCD-FRG-TV NESTEKIDENYTTINEN VRITELEVISIO LCD FARVEFJERNSYN LCD FARGEFJERNSYN MANUAL DE OPERAO BRUKSANVISNING KYTTOHJE BRUGSVEJLEDNING BRUKERHNDBOK
i Impresso sobre papel ecolgico Trykt p milivnligt papper Painettu kierratyspaperille Trykt pa miljrigtigt papir Trykket p miljvennlig papir
Impresso no Espanha Tryckt i Spanien Painettu Espanjassa Trykt i Spanien Trykket i Spania

TINS-C724WJZZ

06P10-SP-NG

SVENSKA

PORTUGUS

LC-37XD1E LC-42XD1E

LC-37XD1E/LC-42XD1E C724WJZZ / MANUAL DE OPERAO / BRUKSANVISNING / KYTTOHJE / BRUGSVEJLEDNING / BRUKERHNDBOK 2
) : LC-37XD1E ] : LC-42XD1E : LC-37XD1E LC-42XD1E

540.0 540,0

(920.0 ) / [1031.0] (920, 0 ) / [1031,0]
(99.9 ) / [95.9] (99, 9 ) / [95,9]
(120.9) / [139.5] (120,9) / [139,5]
(823.0 ) / [933.0] (823, 0 ) / [933,0] (600.0 ) / [675.0] (600, 0 ) / [675,0] (657.0 ) / [733.0] (657, 0 ) / [733,0] (464.0 ) / [526.0] (464, 0 ) / [526,0]
(377.0 ) / [420.5] (377, 0 ) / [420,5]
(57.0 ) / [58.0] (57, 0 ) / [58,0]

200.0 200,0

LC-42XD1E
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is tted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the or and of the same rating as above, fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked which is also indicated on the pin face of the plug, must be used. Always ret the fuse cover after replacing the fuse. Never use the plug without the fuse cover tted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and t an appropriate type.

200.0 200,0 115.0 115,0

DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To t an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. Before replacing the plug cover make sure that: If the new tted plug contains a fuse, its value is the same as that removed from the cut-off plug. The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires. IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

LC-37XD1E

BRUKSANVISNING
Bilderna och skrmexemplen i denna bruksanvisning r endast fr illustrativa syften och kan skilja sig en aning frn vad som faktiskt visas. De exempel som anvnds i denna bruksanvisning r baserade p modellen LC-42XD1E.

Innehll

Innehll...1 rade SHARP-kund...2 Viktiga skerhetsfreskrifter...2 Varumrken...2 Medfljande tillbehr...3 Snabbguide...3 Montering av stllet..3 Placering av TV:n...4 TV (sedd framifrn)...5 TV (sedd bakifrn)...5 Isttning av batterier...6 Anvndning av fjrrkontrollen..6 Frsiktighetstgrder gllande fjrrkontrollen.6 Fjrrkontroll...7 Att sl p strmmen...8 Beredskapslge..8 Ursprunglig autoinstallation (analog)..8 Ursprunglig autoinstallation (DTV)...8 Kanalval med hjlp av programlistan (analog)..9 Anvndning av yttre utrustning..10 Anslutning av en videobandspelare...10 Anslutning av en spelkonsol eller videokamera.10 Anslutning av en DVD-spelare..10 Anslutning av en avkodare..11 Anslutning av en dator..11 Anvndning av lnksystemet AV Link..11 Menyoperationer...12 Skrmvisning...12 Gemensam operation...12 Menyinstllning utan anvndning av fjrrkontroll..12 Menyn Bild...13 Bakgr.belysn...13 Kontrast..13 Ljus...13 Frg...13 Frgnyans...13 Skrpa...13 Rd...13 Grn....13 Bl...13 Frgtemperatur...13 Svart....13 3D-Y/C...13 D. brusred..13 I/P-instllning...13 Filmlge..14 truD(R)...14 Nollstll...14 Menyn Ljud....14 Diskant...14 Bas...14 Loudness...14 Vol.-automatik..14 Balans...14 Klar rst..14 Nollstll...14 Menyn Anslutningar...15 Dekoder..15 Ingngsval...15 Inst. av HDMI...15 Drivspnning...16 AV-Link (gller endast EXT 2)..16 vriga...16 Menyn Instllning...16 Sndare..16 Barnls...17 Auto-format...17 Sprk...17 Fabriksinstllningar..17 vriga...18 Menyn Geometri...18 Bild horisontal...18 Bild vertikal..18 Fasfrhllande..18 vriga menyposter...19 A/V lge....19 Statusvisning...19 INGNGSKLLA...19 Stillbild...19 OPC....19 Bredbilds-lge..20 Analog text-TV-mottagning...21 Anvndning av analog text-TV-meny..21 Nyhetsash..21 Visa/Tck ver..21 Instllning...22 Operationer p DTV-menyn...23 Driftstangenter fr DTV-menyn..23 DTV-skrmvisning..23 Gemensamma DTV-operationer...23 Angende anvndning av skrmen Alfanumerisk teckenuppsttning...24 Sprk...24 Programinstllning...24 Fav (favorit)..25 Ls...25 Fl. (ytta)...25 Fl. t. (ytta till)...25.h. (verhoppa)...25 Vlj...26 Rad. (radera)...26 Etik. (etikett)...26 Visa...26 Installation...26 Autoinstallation...26 Brvgsskanning...26 Brarinstllning...27 Systeminstllning...27 OSD-instllning...27 Barnls...28 Tillbehr....28 Programversion...28 Uppgradering av program..28 Gemensamt grnssnitt..29 Isttning av ett CA-kort..29 Strmfrsrjning av antennen..29 Angende EPG...30 Anvndning av EPG...30 Anvndning av EPG-timer..30 Anvndning av ESG...31 Anvndning av den digitala programlistan.31 Att titta p ett stationsbaner..31 Anvndning av funktionen Multiljud...32 Visning av textning...32 Anvndning av tillmpningsprogrammet MHEG5 (endast Storbritannien)...32 Bilaga....33 Felskning...33 Tabell ver datorkompatibilitet..34 Specikationer fr porten RS-232C...34 Tekniska data...36 Extra tillbehr...36 Slutlig avskaffning..37