SHARP plasma cutting range

www.cemont.com

SHARP 6K
nducting for cutting all electrical co Plasma cutting generators supply. gy. Single-phase power metals. Inverter technolo

CHARACTERISTICS

POWER SUPPLY VOLTAGE: 230 V single-phase SUPPLY U P (equipped with 16 A home outlet plug). SELF-CONTAINED: built-in compressor SELF-CONTAINED: NE that makes the system independent of all compressed air supply systems. systems LIGHTWEIGHT: easy to carry (12 kg only). EASY TO USE: cuts up to 2 mm thickness without ground cable. Exceptionally good when cutting painted workpieces. DIGITAL DISPLAY: for improved adjustment and optimum display of parameters.
Single-phase power supply Current absorption*/power absorption Effective consumption Current range Duty cycle at 40 C and 50% Index of protection Size Weight
*at maximum cutting current

Standard Equipment

230 V - 50/60 Hz 16 / 3,5 kVA 11 A 10 - 20 A
Power supply cable with 16 A plug Equipped ground cable Assembled torch equipped with consumables Operating and maintenance manual

440 x 185 x 310 mm

Standards EN 60974.1 EN 60974.7 EN 60974.10
Cutting capacity (on steel) For quality 4 mm For separation 6 mm

SHARP 6K Code W 709

SHARP 10
LIGHTWEIGHT: LIGHTWEIGHT: easy to carry (8 kg only). E T CONTACT CUTTING: improved cutting T CUTTING: T quality and reduction of smoke emissions. COMPLETE: shipped ready-to-use. COMPLETE: P E DIGITAL DISPLAY: for improved adjustment and optimum display of parameters.
Single-phase power supply Current absorption*/power absorption Effective consumption Compressed air consumption Current range Duty cycle at 40 C 30% 60% 100% Index of protection Size Weight
* at maximum cutting current
230 V (50-60 Hz) 23 A / 5,0 kVA 14 A > 100 l/min - 4 bars 10 - 30 A

25 A 20 A IP 23

370 x 160 x 270 mm
Cutting capacity (on steel) For quality 8 mm For separation 10 mm

SHARP 10 Code W 707

SHARP 22
nducting for cutting all electrical co Plasma cutting generators pply. gy. Three-phase power su metals. Inverter-technolo
COMPACT COMPACT AND LIGHTWEIGHT: less than 25 kg P LIGHTWEIGHT: E T and compact dimensions. Very handy. V POWERFUL: cutting quality up to 20 mm. POWERFUL: RF CUTTING PERFORMANCE: maximum cutting current CUTTING PERFORMANCE: T R R CE of 65 A at 35% (at 40 C) and at 100% (at 25 C). SCARFING: excellent for making precision channels during scarng. GRATING CUTTING MODE: with automatic restart. CONTACT CUTTING: improved cutting quality and reduced smoke emissions. COMPLETE: shipped ready-to-use.
3-phase power supply Current absorption*/power absorption Effective consumption Current range Duty cycle at 40 C 35% 60% 100% Index of protection Size Weight
400 V (50/60 Hz) 20,1 A (400 V) / 13 kVA 14,5 A 20 - 65 A 65 A 50 A 65 A (a 25 C) IP 23

435 x 235 x 380 mm

Power supply cable Ground cable with clamp Equipped torch and bag with consumables Operating and maintenance manual
Cutting capacity (on steel) For quality 20 mm For separation 24 mm

Code W 496

SHARP 25M
for cutting all electrical Plasma cutting generators -phase power supply. conducting metals. Three
POWER SUPPLY VOLTAGE: 200 V, 230 V, 380 V, 400 V, SUPPLY U P E V V V V three-phase. EASY TO USE: a single switch adjusts power on 3 E positions. VERSATILITY: V VERSATILITY: all electrical conducting metals T Y can be cut and perforated. perforated POWERFUL: high cyclic duration factor: 80 A at 40% at 40 C. COMPLETE: shipped ready-to-use. STRIKING: clean striking arc using blow-back technology.
3-phase power supply Current absorption*/power absorption Effective consumption Power Compressed air consumption Current range Duty cycle at 40 C 40% 80% 100% Index of protection Size Weight
220 V 230 V 380 V 400 V 49 A 31 A 47 A 29 A 28 A 18 A 27 A 17 A
Power supply cable and ground cable with clamp Equipped, alreadyassembled torch and bag with consumables Operating and maintenance manual
11 kVA 180 l/min - 5 bars 30 - 80 A 80 A 50 A 30 A IP 23

500 x 855 x 705 mm

Cutting capacity (on steel) For contact 8 mm For quality 20 mm For separation 25 mm

Code W 830

SHARP 40M
for cutting all electrical Plasma cutting generator -phase power supply. conducting metals. Three
POWER SUPPLY VOLTAGE: 200V, 230V, 380V, 400V, SUPPLY U P E 200V, 230V, 380V, 400V, V V V V three-phase. EASY TO USE: a single switch adjusts power on 4 E positions. VERSATILITY: V VERSATILITY: all electrical conducting metals T Y can be cut and perforated. perforated POWERFUL: high cyclic duration factor: 120 A at 50% at 40 C. COMPLETE: shipped ready-to-use. INNESCO: arco dinnesco pulito con tecnologia blow-back.

3-phase power supply Current absorption*/power absorption Effective consumption Power Compressed air consumption Current range Duty cycle at 40 C 50% 75% 100% Index of protection Size Weight
220 V 230 V 380 V 400 V 74 A 52 A 71 A 50 A 42 A 30 A 40 A 28 A
16 kVA 220 l/min - 5,5 bar 30 - 120 A 120 A 85 A 50 A IP 23

125 kg

Cutting capacity (on steel) For contact 8 mm For quality 35 mm For separation 40 mm

SHARP 40M Code W 831

Contacts
BELGIUM AIR LIQUIDE WELDING BELGIUM SA Z.I. West Grijpen - Grijpenlaan 5 - 3300 TIENEN Tel.: +20 - Fax: +22 CZECH REPUBLIC AIR LIQUIDE WELDING CZ s.r.o. - Welding and Cutting Podnikatelsk 565 - Areal SVUM - PRAHA 9 - Bchovice Tel.: +- Fax: +FRANCE AIR LIQUIDE WELDING FRANCE 13, rue dpluches - BP 70024 Saint-Ouen lAumne 95315 CERGY PONTOISE Cedex Tel.: +- Fax: +HUNGARY AIR LIQUIDE WELDING HUNGARY kft. - Welding and Cutting Krisztina ktr. 39/b H-1013 BUDAPEST Tel.: +- Fax: +ITALY CEMONT S.p.A. Loc. Casalmenini 37010 Rivoli Veronese VERONA Tel. +6208993 - Fax +6200548 LUXEMBURG AIR LIQUIDE WELDING LUXEMBURG 5 rue de la Dportation - BP 1385 - L - 1415 LUXEMBURG Tel.: +- Fax +NETHERLANDS AIR LIQUIDEWELDING NETHERLANDS Rudonk 6 B - NL 4824 AJ BREDA Tel.: +80 - Fax: +96 POLAND AIR LIQUIDE WELDING POLSKA - SP. Z.o.o UL. Porcelanowa 10 - 40-246 KATOWICE Tel.: +50 - Fax: +60 PORTUGAL AIR LIQUIDE SOLDADURA LDA Rua Dr. Antnio Loureiro Borges, 4-2Arquiparque Miraores - 1495-131 ALGS Tel: +900 - Fax: +40 ROMANIA DUCTIL Aleea Industriilor Nr 1 - 120224 BUZAU Tel.: +- Fax: +RUSSIA AIR LIQUIDE WELDING 17 Vorontsovskaya Str. - 109147 MOSCOW Tel.: +98 - Fax: +91 SLOVAKIA AIR LIQUIDE WELDING CENTRAL EUROPE S.R.O. Prazska 35 - 94901 NITRA Tel: +01 - Fax: +19 SPAIN OERLIKON SOLDADURA SA Poligono Industrial la Noria Carretera de Castellon Km-15,500 - 50730 El Burgo de Ebro - ZARAGOZA Tel.: +00 - Fax: +67 U. K. AIR LIQUIDEWELDING Ltd Low March / London Road - DAVENTRY Northants NN11 4SD Tel.: +- Fax: +13 10
Contacts for other counties
ALW Export Department Italy Via Torricelli15/A 37135 VERONA Tel: +511 - Fax: +536 E-mail: export.alwitaly@airliquide.com ALW Export Department France 13, rue dEpluches BP 70024 Saint Ouen lAumne 95315 CERGY-PONTOISE Cedex Tel: +- Fax: +E-mail: export.alwfrance@airliquide.com

www.airliquide.com

Founded in 1902, Air Liquide is the world leader in industrial and medical gases and related services. The company has ofces in 72 countries and employs a work force of 40,000. Drawing on constantly renewed technologies, Air Liquide develops groundbreaking solutions used in making countless everyday products and in helping to preserve life.
W 952 - LIMAGE 02/2008 - S02
Air Liquide Welding reserves the right to modify its equipment without prior notice. The illustrations, descriptions and characteristics are given for information only and do not engage the responsibility of the manufacturer.