Reviews & Opinions
Independent and trusted. Read before buy Sherwood RD-6502!

Sherwood RD-6502

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sherwood RD-6502 Home Cinema Amplifier, size: 3.2 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sherwood RD-6502About Sherwood RD-6502
Here you can find all about Sherwood RD-6502 like manual and other informations. For example: review.

Sherwood RD-6502 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sherwood RD-6502 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sherwood RD-6502 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Sherwood Europe | RD-6502 5.1 Channel A/V Surround Receiver

Page 1 of 2

Search
HOME Products News/Events Support FAQ Company History Contact Us Legal Notice Disclaimer
HOME >Products >Audio Video Receivers >RD-6502
2006 Sherwood Europe | Disclaimer | Legal Notice
5.1 Channel A/V Surround Receiver Pictures: Front | Silver | Connection panel
Key Features DTS Dolby Digital Dolby Prologic II 3 DSP Modes (Theater/Hall/Stadium) Tone Control (Bass/Treble) 2 Component Inputs & 1 Output (HDTV Compatible) 3 Digital Inputs (1 Optical/ 2 Coaxial) 6 Channel Direct Input, Front Panel AV Input Amplifier Features
WRAS (Wide Range Amplifier Stage) for All Channels 100Watts x 2@6Ohm,1kHZ, 1%THD in Stereo Mode 110Watts x 5@6Ohm,1kHZ, 1%THD / Only Channel
http://www.sherwood.de/products/rd_6502.php

3/5/2008

Page 2 of 2
Tuner Features Quartz PLL Synthesized Digital Tuning (4 Gangs) Auto Scan & Preset Memory (30 Stations) RDS Function: PS,CT,RT,TA etc. (Europe Version) Dynamic Range Control (Multi-Step) General Features Color Coded Terminals Headphone Jack DigiLink III Remote Control for Sherwood Components One-Touch Auto Function Operation Sleep Timer Remote Control Color Availability: Silver / Black Dimensions(WxHxD): 440x141x330mm Weight(Net): 9.5Kg

doc1

RD-6500

AUDIO/VIDEO RECEIVER

Introduction

READ THIS BEFORE OPERATING YOUR UNIT

ENGLISH

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Note to CATV System Installer : This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as pracitcal. FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the the users authority to operate the equipment. FOR YOUR SAFETY
Units shipped to the U.S.A and Canada are designed for operation on 120 V AC only. Safety precaution with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug. U.S.A CANADA 120 V

ATTENTION

: To prevent electric shock, match wide blade of plug to wide slot, fully insert. : Pour viter chocs lectriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond.
Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. Keep the set free from moisture, water, and dust. Do not let foreign objects in the set. Handle the power cord carefully. Hold the plug when unplugging the cord. Unplug the power cord when not using the set for long periods of time. Do not obstruct the ventilation holes. Do not let insecticides, benzene, and thinner come in contact wth the set. Never disassemble or modify the set in any way.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Insturctions - All operating and use instuctions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement, or near a swimming pool; and the like. 8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers insturctions, and should use a mounting accessory recommended by the manufacturer. 9. A product and cart combinaion should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing PORTABLE CART WARNING the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers intructions have been adhered to. 11. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For porducts intended to operate from battery power, or other sources, refer to the operating instructions. 12. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replae your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternate Warnings - This product is equipped with a three-wire grounding-type plug, a plug having a third(grounding) pin. This plug will only fit into a grounding-type power outlet. this is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the gronding-type plug. 13. Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particlar attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 14. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, Figure 1

Example of antenna grounding as per National Electrical Code, ANSI/NFPA 70
15. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 16. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 18. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 19. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Damage Requiring Service - Unplug this product form the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance this indicates a need for service. 21. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 22. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 23. Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 24. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

connection to grounding electrodes, and requirements for the grounding electrode. See Figure 1.

CONTENTS

READ THIS BEFORE OPERATING YOUR UNIT... 2
SAFETY INSTRUCTIONS.... 3 System Connections..... 5 Front Panel Controls.... 7 Remote Controls..... 8
REMOTE CONTROL OPERATION RANGE... 9 LOADING BATTERIES.... 9

Operations

LISTENING TO A PROGRAM SOURCE.... 10 SURROUND SOUND.... 13 ENJOYING SURROUND SOUND... 15 LISTENING TO RADIO BROADCASTS... 20 RECORDING..... 22 OTHER FUNCTIONS.... 23
Troubleshooting Guide..... 24 Specifications..... 25

System Connections

Do not plug the AC input cord into the wall AC outlet until all connections are completed. Be sure to observe the color coding when connecting audio and video cords. Change the position of the FM indoor antenna until you get the best reception of your favorite FM stations. A 75 outdoor FM antenna may be used to further improve the reception. Disconnect the indoor antenna before replacing it with the outdoor one. Place the AM loop antenna as far as possible from the receiver, TV set, speaker cords and the AC input cord and set it to a direction for the best reception. If the reception is poor with the AM loop antenna, an AM outdoor antenna can be used in place of the AM loop antenna. Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver. If the electricity fails or the AC input cord is left unplugged for more than 2 weeks, the memorized contents will be cleared. Should this happen, memorize them again.
VIDEO IN CD TAPE MON. VIDEO 1 VIDEO 2

VIDEO 2

VIDEO OUT

MONITOR

VIDEO 1

Front Panel Controls

AUDIO/VIDEO RECEIVER RD-6500

MASTER VOLUME MAIN POWER

REMOTE SENSOR

ST TUNED

PRESET MEM

TONE DIRECT

dB kHz MHz DIGITAL

ON/ OFF

Pro Logic

THEATER

ms SLEEP

STANDBY

SURROUND MODE AUTO DSP MODE STEREO AUDIO

If the tone display disappears, start from the step 10 again. Each time this button is pressed, the corresponding tone mode is selected and shown for 3 seconds as follows: BASS TRBL(treble) Note: When the TONE DIRECT indicator is lighting up, the tone mode cannot be entered. Notes: Extreme settings at high volume may damage your speakers. When the digital signals from Dolby Digital program sources are input in available surround mode, the tone cannot be adjusted and the tone direct function is automatically switched to ON.
To listen to a program source without the tone effect.
The TONE DIRECT indicator lights up and the sound that bypasses the tone circuitry will be heard. To cancel the tone direct function, press this button again.

SURROUND SOUND

This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater.

Surround modes

Dolby Digital Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Discs bearing the DOLBY includes the recording of up to 5. 1 channels

D I G I T A L

Dolby Pro Logic Dolby Pro Logic is a specially encoded two channel surround format which consists of four channels (front left, center, front right and surround). Sources bearing the DOLBY SURROUND provide the theater-like surround sound. The surround channel is monaural, but is played through two surround speakers. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The following modes apply conventional 2-channel signals such as digital PCM or analog stereo signals to high performance Digital Processor to recreate sound fields artificially. MATRIX This mode reproduces a delayed signals from the surround channels to emphasize the sense of expansion for music sources. THEATER This mode provides the effect of being in a movie theater when watching a movie source. HALL This mode provides the ambience of a concert hall for classical music sources such as orchestral, chamber music, or an instrumental solo. STADIUM This mode provides the expansive sound field to achieve the true stadium effect when watching baseball or soccer games. CHURCH This mode provides the ambience of a church for baroque, string orchestral or choral group music.
of digital signals, which can reproduce much better sound quality, spatial expansion and dynamic range characteristics than the previous Dolby Surround effect.

Channels Front L/R Center Rear L/R Subwoofer Modes Dolby Digital Dolby Pro Logic II Dolby Pro Logic
FRONT LEFT SUB WOOFER TV set CENTER SPEAKER FRONT RIGHT

REAR LEFT

REAR RIGHT

Other Surround

Stereo

6 CH DIRECT

Depending on the speaker settings, the sound from the corresponding channels cannot be reproduced. (For details, refer to Adjusting the speaker settings on page 17.)

ENJOYING SURROUND SOUND

Surround sound effect will not work properly if the signal passes through a graphic equalizer. Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer.
Depending on the input digital signal format, select the desired decoding mode. Each time the AUTO button is pressed, the decoding mode changes as follows:
IN-AUTO : The input digital signal format(Dolby Digital or PCM(2 channel stereo), etc.) used by the selected digital input source is detected automatically to perform the necessary decoding process for optimum surround modes. IN-PCM : The PCM signal processing is performed only when PCM signals are input.
Notes: Only when the digital input is selected as signal input for the input sources except TUNER, AUX and TAPE MONITOR, the decoding mode can be selected.
Select the desired surround mode.
Each time the DSP MODE button is pressed, the surround mode changes depending on the input signal format and the selected decoding mode as follows:
When Dolby Digital signals are input in the IN-AUTO mode, one of the following modes can be selected depending on the number of the recorded channels. Dolby Digital 5.1-channel sources: DOLBY DIGITAL Dolby Digital 2-channel sources: DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC, DOLBY PRO LOGIC II MUSIC, DOLBY PRO LOGIC II MATRIX and DOLBY PRO LOGIC II CUSTOM When PCM(2 channel stereo) signals are input in the IN-AUTO or IN-PCM mode, one of the following modes can be selected : DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC, DOLBY PRO LOGIC II MUSIC, DOLBY PRO LOGIC II MATRIX, DOLBY PRO LOGIC II CUSTOM, MATRIX, CHURCH, THEATER,HALL and STADIUM.
When the analog input is selected as signal input and analog stereo signals are input, you can select the desired of these above surround modes, too. Notes: When the selected decoding mode is not matched to the input signal format, no sound is heard. Therefore, be sure to select the required decoding mode and the available surround mode according to the input signal format. When the 6 CH DIRECT is selected as an input source, the decoding and surround modes cannot be selected.

When canceling the surround mode for stereo operation. ENGLISH

STEREO

Then the stereo mode is selected. To cancel the stereo mode, select the desired surround mode with using the DSP MODE button.
Adjusting the Dolby Pro Logic II parameters
When selecting the Dolby Pro Logic II Music and Custom modes, you can adjust the various surround parameters for optimum surround effect. While scrolling PL II MUSIC(for Dolby Pro Logic II Music mode) or PL II CUSTOM(for Dolby Pro Logic II Custom mode), press the MEMORY/ENTER button to select the desired parameter.

MEMO/ENTER

Each time this button is pressed, the parameter changes and is displayed for 5 seconds as follows:
Panorama mode(PANO) : This mode extends the front stereo image to include the surround speakers for an exciting wraparoundeffect with side wall imaging. Select OFF or ON. Center width control(C-WID) : This control adjusts the center image so it may be heard only from the center speaker, only from the left/right speakers as a phantom image, or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7. Dimension control(DIMEN) : This control gradually adjusts the soundfield either towards the front or towards the rear. The control can be set in 7 steps from - 4 to +2. 7 kHz Low Pass Filter(LPF) : Select OFF or ON to turn off or on the pass filter on the surround channels. Shelf Filter(SH - F) : Select OFF or ON to turn off or on the shelf filter on the surround channels. Right Surround Channel Polarity Inversion(PO - I) : Select OFF or ON to turn off or on the polarity inversion. Automatic Balancing(BAL) : Select OFF or ON to turn off or on the automatic balancing
If the Dolby Pro Logic II Music or Custom display disappears, you cannot select the parameter. In this case, select the desired surround mode again by pressing the DSP MODE button. In the Dolby Pro Logic II Music mode, you cannot select the 7 kHz Low Pass Filter, Shelf Filter, Right Surround Channel Polarity Inversion and Automatic Balancing. For your reference, the initial settings for parameters are as follows: PANO : OFF, C-WID : 0, DIMEN : 0, LPF : OFF, SH-F : OFF, PO-I : ON, BAL : OFF.
At the desired parameter, adjust it as desired.
Repeat the above steps 3 and 4 to adjust other parameters.
If the parameter display disappears, start from the step 3 again.
Note: In the Dolby Pro Logic II Customer mode, you cannot set both of the 7 kHz Low Pass Filter and Shelf Filter to ON simultaneously. If so, the filter set previously is automatically changed to OFF.
Adjusting the speaker settings
Adjust the settings of front, center ,rear speakers and subwoofer connected. If the speaker setting is adjusted to S, the low range bass sound of the channel(s) is redirected to the subwoofer or the front channels and if the speaker setting is adjusted to N, the sound of the channel(s) is redirected to other channels. Press the SPEAKER MODE button for more than 2 seconds to enter the frontcenter-rear speaker mode.

( ): Adjustable only when the digital signals from Dolby Digital program source that includes LFE signal are input in the available surround mode.
The LFE level can be adjusted within the range of -10~0 dB and other channel levels within the range of -15~+15 dB. In general, we recommend the LFE level to be adjusted to 0 dB. If the recommended levels seems too high, lower the setting as necessary. If the channel display disappears, start from the above step 11 again.
When it is in the stereo, or the speaker setting is N, center, rear or subwoofer channel will not be selected.
Repeat the above steps 11 and 12 to adjust other channel levels.
Adjusting each channel level with test tone
Only when it is in available surround modes except stereo mode, the volume level of each channel can be adjusted easily with the test tone function. Note: When the 6 CH DIRECT is selected as an input source, the test tone function does not work.
At each channel, adjust the level as desired until the sound level of each speaker is heard to be equally loud.
Enter the test tone mode.
You can select the desired channel and adjust its level with repeating the steps 11 and 12 in Adjusting each channel level procedure.
The test tone will be heard from the speaker of each channel for 2 seconds as follows; Front Left Center Front Right Rear Left Rear Right SUBwoofer When the speaker setting is N, the test tone of the corresponding channel is not available. When the selected decoding mode is not matched to the input signal format, the test tone function cannot work.
Cancel the test tone function.
In case of Dolby Digital, Dolby Pro Logic II or Dolby Pro Logic mode, when the distances from the prime listening position to front left, center, front right, rear left and rear right speakers are same, the basic settings are as follows according to the surround modes;
- In the Dolby Digital mode, Center delay time : 0 ms, Rear delay time : 0 ms - In the Dolby Pro Logic II Music, Matrix or Custom mode, Rear delay time : 0 ms - In the Dolby Pro Logic II Movie, Dolby Pro Logic mode, Rear delay time : 10 ms
If the center or the rear speaker(s) is(are) not at the same distance from the prime listening position as the front speakers, increase or decrease the center delay time by 1 ms for every about 30 cm(1 foot) it is closer or farther away and increase or decrease the rear delay time by 5 ms for every about 1~1.5 m(3~5 feet) it is closer or farther away.

Each time this button is pressed in the Dolby Digital, Dolby Pro Logic II or Dolby Pro Logic mode, the delay time changes in regular intervals. If the delay time disappears, start from the step 17 again.
Check the delay time to be adjusted.
In Dolby Digital mode, repeat the above steps 17 and 18 to adjust the rear delay time.
The delay time will be displayed for 5 seconds. The corresponding delay time is displayed. The center delay time can be adjusted in the Dolby Digital mode only.
Downmixing into 2 front channels
Allows the multi-channel Dolby Digital signals to be reproduced through only two speakers or through headphones. When the digital signals from the Dolby Digital program sources are input in available surround mode, press the STEREO button.
ST and the Dolby Digital indicators light up, meaning it enters the 2-CH downmix mode, and then the discrete multi-channels(except LFE) are mixed down into 2 front channels.
To cancel the 2-CH downmix mode, select the desired surround mode with using the DSP MODE button. When the playback of the source on the player is stopped or interrupted, etc., the 2-CH downmix mode is not canceled even though ST and the Dolby Digital indicators go off. If the headphones are plugged and the SPEAKER button is set to off while the digital signals from the Dolby Digital program sources are being input, it will enter the 2-CH downmix mode automatically(but only the Dolby Digital indicator lights up still) and if the headphones are unplugged and the SPEAKER button is set to on in the 2-CH downmix mode, it will return to the previous mode.
In Dolby Digital, Dolby Pro Logic II or Dolby Pro Logic mode, adjusting delay times of the speakers

Adjust the delay time.

LISTENING TO RADIO BROADCASTS

Select the desired band.

Auto tuning

Select the tuner.

FREQUENCY
Each time this button is pressed, the band is changed to FM or AM. When pressing the BAND button without selecting the TUNER, the tuner will be selected automatically.

Select the tuning mode.

T/P MODE
Press the TUNING/PRESET UP( ) or DOWN( ) button for more than 0.5 second.

TUNING/PRESET

Each time this button is pressed, the mode changes as follows; Tuning mode : PRESET goes off. Preset mode : PRESET lights up.
The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and TUNED. If the station found is not the desired one, simply repeat this operation. Weak stations are skipped during auto tuning.

Manual tuning

Manual tuning is useful when you already know the frequency of the desired station. Perform the steps 1 to 3 in Auto tuning procedure and press the TUNING/PRESET UP( ) or DOWN( ) button repeatedly until the right frequency has been reached.

Presetting radio stations
You can store up to 30 preferred stations in the memory. Tune in the desired station with auto or manual tuning.
Press the MEMORY/ENTER button.
MEM is flickering for 5 seconds.
When using the NUMERIC buttons on the remote control. 3 Examples) For 3 :
MEMORY BACKUP FUNCTION The following items, set before the receiver is turned off, are memorized. INPUT SELECTOR settings Surround mode settings Preset stations,etc. Note : If the electricity fails or the AC input cord is disconnected for more than 2 weeks, they are all cleared. So you should memorize them again.

For 15 : For 30 :

within 2 seconds
The station has now been stored in the memory. When using the NUMERIC buttons, the station is stored automatically without pressing the MEMORY/ENTER button. A stored frequency is erased from the memory by storing another frequency in its place. If MEM goes off, start again from the above step 2.
Tuning to preset stations
After selecting the tuner as an input source, select the preset tuning mode.
Select the desired preset number.
When using the NUMERIC buttons on the remote control. 3 Examples) For 3:

For 15:

For 30: Then PRESET lights up.
When selecting the desired preset number with the NUMERIC buttons, the desired preset station will be tuned to automatically without selecting the preset tuning mode.
Listening to FM stereo broadcasts
While listening to FM broadcasts. Each time this button is pressed, the FM mode changes as follows; Stereo mode : ST lights up. Mono mode : ST goes off. When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise, then FM broadcasts are reproduced in monaural sound.

FM MODE

Scanning preset stations in sequence
The receiver will start scanning the stations in the preset sequence and each station is received for 5 seconds. At the desired station, press this button again to stop scanning.
Select the desired preset number (1~30) and press the MEMORY/ENTER button.

Repeat the above steps 1 to 3 to memorize other stations.

RECORDING

The analog signals from the 6 CH DIRECT inputs as well as the digital signals from the coaxial or optical digital input can be heard but cannot be recorded. The volume and tone (bass, treble) settings have no effect on the recording signals.
Recording with TAPE MONITOR
Select the desired input as a recording source except for TAPE MONITOR.
Start recording on the TAPE MONITOR.
Start play on the desired input.
For tape monitor function, refer to TAPE MONITOR function on page 10. Start recording on the VIDEO 1.
Be sure that TAPE M goes off.
Dubbing from video components onto VIDEO 1
Select VIDEO 2 or VIDEO 3 as a recording source.
Start play on the VIDEO 2 or the VIDEO 3.
The audio and video signals from the VIDEO 2 or the VIDEO 3 will be dubbed onto the VIDEO 1 and you can enjoy them on the TV set and from the speakers. Select CD as an audio recording source.
Dubbing the audio and video signals separately onto VIDEO 1
Example) When dubbing the VIDEO 2 video signal and the CD audio signal separately onto VIDEO 1. Select VIDEO 2 as a video recording source.
Start recording on the VIDEO 1.
The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set and from the speakers. Note : Be sure to observe the order of the above steps 1 and 2.

OTHER FUNCTIONS

Compressing the dynamic range (Dolby Digital sources only)
This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track(with extremely high volume) to minimize the difference in volume between the specified and non-specified parts. This makes it easier to hear all of the sound track when watching movies at night at low levels. When the digital signals from Dolby Digital program source are input in available surround mode.

DYNAMIC RANGE

Each time this button is pressed, the mode changes and disappears in 3 seconds as follows: DYNR 0.0 : Off DYNR 0.5 : Low compression DYNR 1.0 : High compression
In some Dolby Digital software, this function may not be available.
Operating the sleep timer
The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. To set the receiver to automatically turn off after the specified period of time.
Adjusting the brightness of the fluorescent displays
DSP MODE D.TIME ADJUST AUX
Each time this button is pressed, the sleep time changes and disappears in 3 seconds as follows; 90 OFF

Unit : minutes

Each time this button is pressed, the brightness of fluorescent display changes as follows; ON dim OFF In the display OFF mode, pressing any button will restore the display ON mode.
While operating the sleep timer, SLEEP lights up.
Start play on the VIDEO 2 and the CD respectively.

Troubleshooting Guide

If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty.

PROBLEM

No power

POSSIBLE CAUSE

The AC input cord is disconnected. Poor connection at AC wall outlet or the outlet is inactive. The speaker cords are disconnected. The master volume is adjusted too low. The MUTE button on the remote control is pressed to ON. Speakers are not switched on. Incorrect selection of the input source. Incorrect connections between the components. Surround mode is switched off(stereo mode). Master volume and rear level are too low. A monaural source is used. Rear speaker setting is N. Surround mode is switched off(stereo mode). Center speaker setting is N. Master volume and center level are too low. No antenna is connected. The desired station frequency is not tuned in. The antenna is in wrong position. An incorrect station frequency has been memorized. The memorized stations are cleared. No antenna is connected. The antenna is not positioned for the best reception. Weak signals.

REMEDY

Connect the cord securely. Check the outlet using a lamp or another appliance. Check the speaker connections. Adjust the master volume. Press the MUTE button to cancel the muting effect. Press the SPEAKER button to ON. Select the desired input source correctly. Make connections correctly.

No sound

No sound from the rear speakers
Select a surround mode. Adjust master volume and rear level. Select a stereo or surround source. Select the desired rear speaker setting. Select the desired surround. Select the desired center speaker setting. Adjust master volume and center level. Connect an antenna. Tune in the desired station frequency. Move the antenna and retry tuning. Memorize the correct station frequency. Memorize the stations again. Connect an antenna. Change the position of the antenna.

No sound from the center speaker
Stations cannot be received
Preset stations cannot be received

Poor FM reception

Continuous hissing noise during FM reception, especially when a stereo broadcast is received. Continuous or intermittent hissing noise during AM reception, especially at night. Remote control unit does not operate.
Change the position of the antenna. Install an outdoor antenna.
Noise is caused by motors, fluorescent lamps or lightning, etc.
Keep the receiver away from noise sources. Install an outdoor AM antenna. Replace the batteries. Remove the obstacle.
Batteries are not loaded or exhausted. The remote sensor is obstructed.

Specifications

AMPLIFIER SECTION
Power output, stereo mode, 6 , THD 0.7%, 40 Hz~20 kHz... W Total harmonic distortion, 6 , 100 W, 1 kHz.... 0.09% Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 , 100 W..... 0.1% Input sensitivity, 47 k Line (CD, TAPE, VIDEO)..... 200 mV Signal to noise ratio, IHF A weighted Line (CD, TAPE, VIDEO)..... 92 dB Frequency response Line (CD, TAPE, VIDEO), 20 Hz~50 kHz.... +0 dB, -3 dB Output level TAPE REC, 2.2 k...... 200 mV PRE OUT(Front, Center, Rear, Subwoofer), 1 k.... 1.0 V Bass/Treble control, 100 Hz/10 kHz.... 10 dB Surround mode, only channel driven Front power output, 6 , 1 kHz, THD 0.7 %.... 125 W+125 W Center power output, 6 , 1 kHz, THD 0.7 %.... 125 W Rear power output, 6 , 1 kHz, THD 0.7 %.... 125 W+125 W

DIGITAL AUDIO SECTION

Sampling frequency.... 32, 44.1, 48, 96 kHz Digital input level Coaxial, 75 ..... 0.5 Vp-p Optical, 660 nm..... -15~-21 dBm

FM TUNER SECTION

Tuning frequency range..... 87.5~108 MHz Usable sensitivity, THD 3%, S/N 30 dB.... 12.8 dBf 50 dB quieting sensitivity, mono/stereo.... 20.2/45.3 dBf Signal to noise ratio, 65 dBf, mono/stereo.... 70/65 dB Total harmonic distortion, 65 dBf,1 kHz, mono/stereo... 0.5/0.8% Frequency response, 30 Hz~15 kHz..... 3 dB Stereo separation, 1 kHz..... 42 dB Capture ratio..... 4 dB IF rejection ratio..... 80 dB

AM TUNER SECTION

Tuning frequency range.... 520~1710 kHz Usable sensitivity...... 500 V/m Signal to noise ratio..... 40 dB Selectivity...... 25 dB

GENERAL

Power supply.... AC 120 V, 60 Hz Power consumption..... 200 W Dimensions (W H D)... 330 mm(17-3/8 5-1/inches) Weight (Net)..... 9.75 kg(21.2 lbs)
Note: Design and specifications are subject to change without notice for improvements.

 

Tags

ZS-M37 Kyron Review BZ28300 3000 Y410 LE46A557 Asus ME99 KV-29CS60B LN46C750r2F Pavilion 700 CM480 SCC-C9302P YSP-4000 BC346XT TH-50PZ80E CD4450S Ultra Zoom 330RS PVM-2950Q CS-321 ZB271TF Dishwasher Activity 2600 SLV-R1000 ODB-3 CDA-9885R CHR-185X X5495 82294 Serie N5005 Ryobi JM80 Nuvi 260W Minikit Chic L100 Pink Heroes Magicolor 5430 DVC665 DTH211 Photo R290 SGH-C170 Cf 85 Express Plus Maestro 4245 HQ8260 21 MFT1500 2 Factor PC Dry Iron DT-510 Advantix F600 VP-4200 DM602 SSC190 1064 D Wtmt2 Samsung F250 FS 350 Divx 300 Analog 50PF9967D TE 2100 Taskalfa 181 Bamboo ONE 3340Z Ca-300 PT-D7700E Roadmate 360 DMC-FS9 32PW8718 PRO 7700 Suunto M1 02R-03D GWP227ylqa TTR125-2002 KD-G701 1350W MC-85 KX-TDA 100 DC4100 Multi-language TTR90-2001 DCR-TRV7 Satellite A50 Tvcr13F1 XE3-GE RME ADI2 Changer SET CS 100 WD-1409FDA DS25204 53 HW GZ-MG20E KF-50SX300 MS-192A VP-D103 GT110 KX-T7350 MV-30 PEG-NR70V BC290W Cinemate

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101