Z W L P O Q M R S N T
Signal strength. Battery charge level, e.g. 50 % Phonebook Call records Surf & fun/ Service supplier portal Organiser Messages Camera Extras My stuff Setup All calls are diverted. Ringing tone off. Short ring (beep) only. Ringtone only if the caller is stored in the Phonebook. Alarm set. Keypad locked. Auto answer feature on. Activated and available. Browser online. IrDA transmission

p q s w y z {

SMS memory full. MMS memory full. Phone memory full. No network access. Missed call Delete assistant Unread Read Sent MMS received MMS with DRM contents (p. 11) E-mail forwarded E-mail with attachment Voice mail received
Message symbols (selection)
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\SUG\CX70_SUG_en_040819_rs_pk_druck\S_ULYR_Displaysymbols.fm
Display symbols (selection)

Events (selection)

right page (7) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:00)

Getting started

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\SUG\CX70_SUG_en_040819_rs_pk_druck\S_ULYR_Startup.fm
Inserting the SIM card/ battery
The service provider supplies you with a SIM card on which all the important data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges. Additional information Please switch off your phone before removing the battery! Only 3 V SIM cards are supported. Please contact your service provider if you have an older card. Press the grooved area 1, then push cover towards the front in the direction indicated by the arrow 2.
Insert the battery sideways into the phone 4, then press it downwards 5 until it engages.
To remove, press the retaining tab on the side of the battery, then lift the battery out. Place the cover in position and push it towards the front 6 until it latches into place.
Place the SIM card in front of the slot with the contact surface facing downwards. Then press the SIM card slightly to push it in 3 (ensure that the chamfered corner is in the correct position).
left page (8) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:00)
Getting started reduce the phones standby time. Avoid placing the phone in the sun or on a heater. Call time: 100 to 330 minutes Stand-by time: 60 to 300 hours

Charging the battery

Open menu. Different functions are available depending on the context: Big letters Illumination Help Search Selection between two font sizes. Set display light brighter/ darker. Display of a help text. List output of the menu. Entering letters will access a function directly.
Digital Rights Mgmt. (DRM)
Remember that you telephone has digital rights management. The use of downloaded pictures, tones or appliations can be restricted by the suppliers, e.g. copy protection, use for a limited period of time only, number of times it can be used etc.
left page (12) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:00)

User guide

Menu controls
The steps needed to reach a function are shown in a condensed form in the user guide, e. g. to display call list for missed calls in condensed form:

Symbols

The following symbols are used to explain operation:
Enter numbers/letters On/Off/End key Call key Soft keys Displays a soft-key function. Press the joystick vertically, e.g., to call up the menu. Press the joystick in the direction indicated. Function dependent on service provider, special registration may be required.

CPCalls missed C

Select
This comprises the following steps: Open main menu. Select P, then function Calls missed. Press to confirm.

B A <>

DFE H I G

Menu speed dialling

All menus are numbered so that a function (such as writing a new SMS) can be selected directly from standby mode by entering a number:
Press this key to display the main menu. Press this key for Messages. Press this key for Write message. Press this key for SMS.

Press joystick

The symbol in the centre of the lower line of the display shows the current function when the joystick is pressed down vertically.
Display menu Take photos Zoom Call, accept call OK
right page (13) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:00)

Standard functions

Option menus
List of functions repeatedly appearing in options menus. Options Edit View Delete/ Delete all New entry Send. Reply/ Reply to all Open menu. Open the entry to edit. Display entry. Delete entry / delete all entries after confirmation. Create new entry. Select transmission service and medium for sending. The sender becomes the recipient, "Re" is placed in front of the subject matter and the received text is transferred into the new message. Store entry. Save recipients in the current address directory. Set sort criteria (alphabetical, type, time).

Text input (p. 16)

T9 preferred: Activate/ deactivate T9 input. Input language: Select language for text. Rename selected entry. Display memory capacity Display properties of the highlighted object Display help text.

Rename Capacity Attributes Help

Highlighting mode

Highlight one or more entries in order to perform a function on it/ them. Options Mark Mark Unmark Open menu. Activate mode. Highlight a non-highlighted entry. Remove the highlighting from a highlighted entry. Highlight all entries. Delete highlighting on all marked entries. All selected entries are deleted.

Save Save to 9 Sort

Additional highlighting functions: Mark all Unmark all Delete marked
left page (14) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:00)

Security

The phone and SIM card are protected against misuse by several security codes. Keep these confidential numbers in a safe place where you can access them again if required.

C TSecurity

PIN control
PIN PIN2 Protects your SIM card (personal identification number). This is needed to set the charge detail display and to access additional functions on special SIM cards. Key code. Used to unlock SIM cards after the wrong PIN has been entered repeatedly. Protects your phone. Must be entered at the first security setting.
The PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone. Some service providers do not permit deactivating the control. Select Press this key. Enter PIN. Confirm input. Press this key. Confirm.

Change

PUK PUK2 Phone code

Change PIN

You can change the PIN to any 4- to 8-digit number you find easier to remember.
Enter current PIN. Press this key. Enter new PIN. Re-enter new PIN.

C J ,C J ,C

Codes Select function.
right page (15) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:00)

Change PIN2

Preventing accidental activation
Even if PIN use is deactivated (p. 14) confirmation is required to switch on the phone. This prevents accidental activation of the phone, e.g. when you are carrying it in a bag or when you are travelling in an aircraft.
(Display only if PIN 2 is available). Proceed as with Change PIN.

Chg.phonecode

(Change phone code) You define the phone code (48 digits) when you call up a phone-code protected function for the first time (e.g. Direct call, p. 47). It is then valid for all phone-code protected functions. Following the third unsuccessful attempt, access to the phone code and the functions that use it is denied. If this occurs, contact the Siemens Service (p. 59).

Redial previous numbers

A A I A
Twice press. To redial the phone number last called: Once press. Pick out a phone number, then to select it press this key.

Call up the redial list:

Auto redial
Auto dial The phone number is dialled ten times at increasing time intervals.
International dialling codes Press and hold until a "+" is displayed. Country Select country.
right page (19) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 11:02)

Call options

Options Functions which are only available during the call are offered.

End call(s)

Yes No
Press the End key. Take call on hold. End all calls.

Swapping between 2 calls

Options Hold Open the menu

Conference

Establish a second connection
Hold current call, then dial the new phone number. Open menu. Swapping between calls.
You call 5 up to conference particicpants one after the other. Once you have established a connection: Options Open menu and select Hold. The current call is put on hold. Now dial a new number. When the new connection is established open menu and select Conference. Repeat until all participants are connected. When the End key is pressed, all calls in the multiparty conversation are ended.

Options Swap

Incoming calls during a call
You will hear a "knocking tone" and you can now: Accept the waiting call in addition to the first. Swap Accept the call and put the current call on hold. Reject the call, or via Divert divert it to the mailbox.
Reject the waiting call Reject

Tone sequences (DTMF)

Enter tone sequences (numbers) for remote inquiries to an answering machine. Options Open menu and select Send DTMF.
Accept the waiting call and end the current call
End call. Accept new call.
left page (20) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:04)

Default book

Default book C LDefault book

Select function.

Phonebook
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\SUG\CX70_SUG_en_040819_rs_pk_druck\S_ULYR_Pref_Book.fm

Show entries

The entries in the standard directory (Addressbook or Phonebook) are shown. Select a name with the first letter and/or scroll.

Start the video recording. Terminate the video recording.
A red point appears in the top right in the display while the video recording is being made. Plays the video recording.

Flash (Accessories)

If the flash is active, this is shown by a symbol in the display. The flash is constantly loaded while connected to the telephone. This reduces the stand-by time.

Self timer

This symbol flashes when the flash is being loaded.
Seettings, see options menu.

White balance

(For standard functions see p. 13) Additional information There is insufficient storage space available. Start the storage assistant to delete specific data (p. 45).
left page (28) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:04)

Message list

The central input folder contains all messages which have been received. The entries are marked with a symbol to indicate their type and status (p. 6). To call up the central input folder, e.g. if a new SMS has been received:

Message lists

C MInbox C MDraft
List of receive messages.
Select message type. Select message type. Select message type.
Press the soft key beneath the symbol.
When you open an entry, the relevant application also starts. After a set time span, entries which have already been read and opened are only displayed in the (Options) message-related incoming lists. In the central input folder, you will find the following message types: SMS, MMS, E-mail System messages Message about MMS, Missed alarm, Missed appts., Calls missed, WAP push, Voice message Data objects Ringtones, Pictures and Video, calendar entries, Notes and Business card.

List of saved drafts.

C MUnsent C MSent
List of messages not yet successfully sent.
List of received messages.

Select message type.

Call up the function menu to process the messages.

Inst. message

This function is not offered by all service providers. Please contact your service provider for more information. You will find a description in the comprehensive operating instructions on the Internet at this address: www.siemens-mobile.com/cx70
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\SUG\CX70_SUG_en_040819_rs_pk_druck\S_ULYR_Lists.fm
All SMS, MMS and E-mail are each displayed infour separate lists.

SMSSMS profiles

Set profile
right page (31) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:04)
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\SUG\CX70_SUG_en_040819_rs_pk_druck\S_ULYR_MMS.fm
The Multimedia Messaging Service enables you to send texts, pictures/ videos and sounds in a combined message to another mobile phone or to an e-mail address. Depending on your telephone setting, you will either receive the complete message or only a notification with sender details and size. The actual MMS can then be downloaded manually later.

<Sound>

Select. Display sound functions: Insert sound, Record Select. Display text functions (see also p. 16).

<Text>

Options Send MMS Play Picture. Sound. Text. Page
Open menu. Send MMS. Play entire MMS on the display. See above. See above. See above. Add page: Insert new page behind current one. Delete page: Delete current page. Page list: Display available pages. Timing: Set the temporal sequence of the MMS presentation: Page duration: Automatic or Manual Show page: Only if Manual is set in front of it. Enter the lifespan of a page.

Create

An MMS consists of the address header and the content. This may consist of a series of pages. Each page may contain a text, a picture and a sound. Remember that pictures and sounds may be protected (DRM, p. 11).

Create standard MMS

First select an object for processing to be added to the first page of the MMS: <Picture> Select. Display picture/video functions: Insert picture, Insert video, Camera

C MCreate newMMS

left page (32) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:04)
Msg. details Enter sending parameters (see next chapter). Save as templ. Layout After creating MMS, save it as a template. See also below: Select one of four possible layouts: Text above, beneath, beside (on left or right) of picture. Select the colours for: Message Page Bitmap Text backg. Text colour
The page(s) of the new MMS is(are) already created. The MMS is displayed.

Colours

MMS Subject: Greetings from London Send to: +1234567654321 | Size: 85 KB

Subject: Send to:

Templates

C MMMS templates

MMS templates are saved MMS with not address. They can be sent as new MMS or used as part of a new MMS. A maximum of 10 templates can be saved. Create templates by writing a new MMS or using an MMS which you have already received. Options Open menu and select Save as templ.
Enter a brief description of the MMS. Enter one or more phone number(s)/ e-mail address(es). Display the MMS size. Start sending procedure. The MMS is sent after confirmation. Provide additional address fields.

Open address entry.

right page (33) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:04)

Sending options

Options Send MMS Play
Open menu. Send MMS. Play entire MMS on the display. Object selection to change an object. Add recipient from the current address directory. Delete individual recipient. Add attachment: File Business card Appointment Display MMS pages for viewing and/or changing. After creating MMS, save it as a template.
Start reception. Depending on the setting (p. 34), the MMS/message is transferred into the central incoming message list (Inbox).
Edit Add recipient Delete recip. Add attachm.
In order to receive the complete MMS subsequently, the message must be opened. Receive Start transfer.
An MMS has been fully received.
Start playback. To the next page. Press briefly once to return to the start of the current page; press briefly twice to return to the start of the previous page. Set volume. Terminate.
Key functions for playback:

Page list Save as templ.

Receive
p / w Arrival of new MMS/notification announced on display.
Subject: From: Size: More:
When the MMS is complete, the message details are displayed. Description of the MMS. Information about the sender. Size of the MMS in KB. Additional input fields.
left page (34) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:04)
MMS Validity: Select the period in which the service centre is to try to deliver the message: Manual, 1 hour, 3 hours, 6 hours, 1 day, 1 week, Maximum* * Maximum period that the service provider permits. Transmission from the service centre to the recipient: Immediate, Tomorrow Length of display for an MMS page (standard requirement). Receive complete MMS or only notification of arrival. Immediate Receive complete MMS immediately. Auto.homenet Receive complete MMS immediately in home network Manual Only the notification is received.

C MMessage setupMMS

Select function. MMS profile:
Six MMS profiles can be set. The sending properties are specified in these profiles. If the setting has not yet been set, you will receive the necessary data from the service provider or via the "Setting Configurator" at: www.siemens-mobile.com/ mobilescustomercare Earliest deliv. time:
Default duration: Retrieval:
Select profile. Open to edit the profile.
Setting options Options Open menu. Activate, Rename, Change sett.

User settings

Set the MMS dispatch to suit your requirements: Delivery report: Read reply: Default priority: Request delivery confirmation for sent messages. Request confirmation that the MMS has been read. Send priority: Normal, High, Low

Spam filter: Settings for receipt of promotional MMS. Size indica- Setting a max. message tion: = size and handling it.
right page (35) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 11:02)

E-mail

Your telephone has an e-mail program (Client) with which you can write and receive e-mails.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\SUG\CX70_SUG_en_040819_rs_pk_druck\S_ULYR_Email.fm

Retr. e-mail

Only the message header is sent. Open menu and select Retrieve body.
Enter address data: Send to: Subject: Content To send: Options Send e-mail Or All fields Open menu. Select. Opens additional input fields. Enter one or more e-mail address(es). Enter the title of the e-mail. Enter text.
Send/rec. mail All e-mails are sent into Inbox and all completed e-mails from the Unsent list are sent.

C MMessage setupE-mail

Before using this service you must set the server access and your e-mail parameters. You will receive the necessary data from the service provider or via the "Setting Configurator" at: www.siemens-mobile.com/ mobilescustomercare
Attachments: Adds attachments such as images and sounds.

Activating access

Receive/read
Select access. Activates access

C MInbox

Account sett.
Select access or <Empty>. Starts processing. Fills in the data fields in accordance with the service supplier template.
Before an e-mail can be read, it must be retrieved from the server.
left page (36) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 11:02)

Voice message/CB

Voice message/CB C MSetup

Voice message

A new voice message can be announced as follows, depending on the service provider:
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\SUG\CX70_SUG_en_040819_rs_pk_druck\S_ULYR_Mailbox_CB.fm
If you have a mailbox, a caller can leave a voice message for you if your phone is switched off or not ready to receive, if you do not want to answer, or if you are making a phone call. You may have to register for this function and make manual settings.

Listening to message

Icon plus beep. Notification via SMS.
Or You receive a call with an automatic announcement. Call your mailbox and play the message(s) back.
The service provider supplies you with two phone numbers:
Save mailbox number Call this phone number to listen to your voice messages.
Press and hold (if necessary enter mailbox number once only). Confirm with OK and Mailbox depending on your service provider.

C MSetup

Assigning functions

Press a number key (e.g. key 3) briefly, then press Set. Select a new function to be assigned from the list and confirm with C.

Reset all

Reset all Select. After a securityquery, the default setting is reset.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\SUG\CX70_SUG_en_040819_rs_pk_druck\S_ULYR_FastDial_MyMenu.fm
right page (51) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:04)

Organiser

Organiser C QSelect function.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\SUG\CX70_SUG_en_040819_rs_pk_druck\S_ULYR_Organizer.fm

Appointments

Appointments are displayed in chronological order in a list.

Calendar

You can enter appointments in the calendar. Time and date must be set correctly. The calendar offers you three views: monthly view, weekly view, daily view. The various entries are colourcoded. Appointments are shown as a vertical colour bar on the horizontal hour division. Navigation:

Enter new appointment

<New entry> Select. Types: Memo: Text input for description Voice memo: Enter voice memos. Call: Enter phone number. Shown with alarm. Meeting: Text input for description. Holiday: Enter start and end date. Birthday: Enter name and date.

c d e f g h

Scroll between weeks/days/hours.

Calendar setup

Start of day: Hour when the working day begins. Start of week: Weekday on which the monthly and weekly view on the left starts Set weekend Set the days for the weekend. Show birthdays: Yes/No.
Different input/selection fields are displayed depending on the type. The number of fields can be restricted, see Standard at the end of the list. Additional information Alarm clock, alarm set. Appointment, alarm set. An alarm sounds even when the phone is switched off (except in Aircraft mode, p. 40). The phone does not go to standby mode. To deactivate it press any key.
left page (52) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:04)

C QSelect function.

A task is displayed like an appointment in the agenda of the selected day. However, unlike an appointment it does not require a time. When no time is entered the task appears at the top of the list every day until it is marked as completed. The entries are made in the same was as Appointments (see "Appointments").
End recording. The recording is automatically saved with a time stamp. Rename with Options.

Playback

T9-support (p. 16) makes writing short notes such as shopping lists easier. Save confidential notes with the phone code.

I C D /E

Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturer's Guarantee under the conditions set out below: In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In respect of parts subject to wear and tear (including but not limited to, batteries, keypads, casings, small parts on casings, protective coverings where included in the scope of delivery), this warranty shall be valid for six months from the date of purchase. This Guarantee shall be invalid if the device defect is attributable to improper treatment and/or failure to comply with information contained in the user manuals. This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves (e.g. installation, configuration, software downloads). User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee. The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident. Ownership of devices or components replaced by and returned to Siemens shall vest in Siemens.
This Guarantee shall apply to new devices purchased in the European Union. For Products sold in the United Kingdom the Guarantee is issued by Siemens plc, Siemens House, Oldbury, Bracknell, Berkshire, RG12 8FZ. Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a Customers Statutory Rights, nor the manufacturer's liability for death or personal injury resulting from its negligence. The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee. Insofar as no Guarantee default exists, Siemens reserves the right to charge the customer for replacement or repair. The above provisions does not imply a change in the burden of proof to the detriment of the customer. To invoke this Guarantee, please contact the Siemens telephone service. The relevant number is to be found in the accompanying user guide.

left page (64) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 11:02)
Guarantee certificate (IRL)
Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturers Guarantee under the conditions set out below: In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In respect of parts subject to wear and tear (including but not limited to, batteries, keypads, casings, small parts on casings, protective coverings where included in the scope of delivery), this warranty shall be valid for six months from the date of purchase. This Guarantee shall be invalid if the device defect is attributable to improper care or use and/or failure to comply with information contained in the user manuals. In particular claims under the Guarantee cannot be made if: The device is opened (this is classed as third party intervention) Repairs or other work done by persons not authorised by Siemens. Components on the printed circuit board are manipulated The software is manipulated Defects or damage caused by dropping, breaking, lightning or ingress of moisture. This also applies if defects or damage was caused by mechanical, chemical, radio interference or thermal factors (e.g.: microwave, sauna etc.) Devices fitted with accessories not authorised by Siemens
This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves (e.g. installation, configuration, software downloads). User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee. The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident. Ownership of devices or components replaced by and returned to Siemens shall vest in Siemens. This Guarantee shall apply to new devices purchased in the European Union. For Products sold in the Republic of Ireland the Guarantee is issued by Siemens Ireland Limited, Ballymoss Road, Sandyford Industrial Estate, Dublin 18 - The Republic of Ireland. Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a Customers Statutory Rights, nor the manufacturers liability for death or personal injury resulting from its negligence. The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee. Insofar as no Guarantee default exists, Siemens reserves the right to charge the customer for replacement or repair. The above provisions does not imply a change in the burden of proof to the detriment of the customer. To invoke this Guarantee, please contact the Siemens helpdesk on 277. This number is also to be found in the accompanying user guide.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\SUG\CX70_SUG_en_040819_rs_pk_druck\S_ULYR_SIX.fm
left page (74) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 11:02)
Index G Games and applications. 39 GPRS.. 46 Groups.. 22 Guarantee certificate. 63 H Handsfree talking. 18 Headset (setting). 49 Hide ID.. 44 Highlighting mode.. 13 Hold call.. 19 Hotline.. 59 I Identity number (IMEI). 45 IMEI number. 45 Info tones.. 45 Information services (CB). 36 Infrared.. 46 Infrared (IrDA).. 46 Input language (T9).. 16 Inst. Message.. 28 International dialling code. 18 Internet.. 37 K Key tones. 45 L Language. 41 Limit (call time/charge).. 25 Logo.. 41 Loss of phone, SIM card. 62
Data connection.. 46 Date format.. 46 Default book.. 20 Device manag.. 57 Dialling code.. 18 Dialling with number keys.. 18 Dictating machine.. 52 Display Illumination.. 42 Language. 41 Symbols. 6 Divert... 44 Download.. 39 DRM.. 11 DTMF codes (tone sequences). 19 Duration/charges. 25 Dynamic Light.. 42 E E-mail Receive/read.. 35 Settings.. 35 Write.. 35 Emergency number.. 10 Emoty.. 38 Extras... 53 F Factory settings. 45 Fast access.. 50 Fast search.. 49 Filter.. 44 Formatting (telephone memory). 45 Frequency range. 48
right page (75) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 11:02)
Index M Mailbox.. 36 Maintenance of phone. 61 Media player.. 58 Menu Controls.. 12 My menu.. 50 Speed dialling.. 12 Menu tree.. 67 Message CB.. 36 E-mail.. 35 Lists.. 28 MMS.. 31 SMS.. 29, 30 Microphone on/off.. 27 Minute beep. 44 Missed appointments.. 52 Missed calls (call list). 25 MMS Receive.. 33 Send.. 32 Write.. 31 Muting (microphone).. 27 My stuff.. 58 N Network Barring.. 48 connection.. 48 Settings.. 48 Notes... 52 O Only.. 47 Only this SIM.. 48 Operating times (battery). 8, 62 Organiser.. 51 Own (phone) numbers.. 24 P
PC connection.. 15 Phone code.. 14 Phone data.. 62 Phone identity number (IMEI). 45 Phone number transmission. 44 Phone Pilot.. 43 Phonebook Additional books. 24 call an entry.. 23 New entry. 23 Protected SIM. 24 VIP numbers.. 24 Pictures & sounds (SMS). 29 PIN Change.. 14 Control. 14 Enter.. 10 PIN2.. 14 Preferred network.. 48 Preventing accidental activation. 15 Product data. 62 Profiles (telephone).. 40 Provider logo.. 41 PUK, PUK2.. 14 R Records.. 25 redial.. 18 Reminder. 18 Remote synchronisation. 57 Ringtones.. 43 S Safety precautions. 2 Screensaver.. 42 Security.. 14 Service tones.. 45 Set time/date.. 46

left page (76) of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 11:02)
Index T T9 Text entry. 16 Word suggestions.. 17 Tasks.. 52 Technical data.. 62 Text module. 17 Time zones.. 10, 46 U Unanswered. 44 Upper and lowercase letters. 16 User group.. 49 V Volume Handset volume.. 18 Profiles. 40 ringtone.. 43 W Walky Talky.. 53 Wallpaper (display). 41 WAP.. 37
Settings.. 40 Short message (SMS). 29 Shown in the display.. 6 Shut down animation.. 42 Signal strength.. 11 Silent alert.. 43 SIM card Clear barring.. 15 Insert.. 7 SIM services (optional). 55 SMS Archive.. 29 Read.. 30 Settings.. 30 To group.. 30 Write.. 29 SMS push.. 28 SOS.. 10 Sound recorder.. 56 Special characters.. 16 Speech time (battery).. 62 Speed dialling keys. 50 Standard functions. 13 Standby mode.. 11 Standby time.. 8 Start up animation.. 42 Stopwatch.. 57 Storage location (Phonebook). 23 Surf & fun.. 37 Swap.. 19 Switch off phone Automatic. 45 Manually.. 10 Switch on phone. 10 Symbols.. 6 Synchronisation. 57