Siemens Gigaset A160 Manual
Siemens Gigaset A160, size: 507 KB
Here you can find all about Siemens Gigaset A160 like manual and other informations. For example: user manual, duo, instructions.
Siemens Gigaset A160 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Siemens Gigaset A160 please write about it to help other people. [ Report abuse or wrong photo | Share your Siemens Gigaset A160 photo ]
Siemens gigaset A160 ring
User reviews and opinions
|thegreatgatsby||5:56pm on Sunday, July 4th, 2010|
|Easy to setup, understand and use. Does exactly what it says on the tin. No Hold facility good price trouble sometimes with the answer phone|
|horac||12:51am on Wednesday, June 30th, 2010|
|Siemens Gigaset A165 Trio The product is smart, easily handled and relatively easy to set up.|
|fw12||7:35pm on Sunday, May 30th, 2010|
|The phones are so good i have got 4 of them in the house 1 in living room 1 in our main bed room and kids got one each combined with our sky talk pack...|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Athen / IM-MEA EN / A31008-M1801-A601-1-UZ19 / Athen_Kombi.fm / 30.10.2008
Handset for A260/A265
Handset for A160/A165
Base station without answering machine
1 Charge status of the 1 battery pack Internal number of the handset 3 Display keys 4 Message key 5 Directory key Control key Talk key 8 End call and 7 On/Off key 9 Ringtone on/off (press 8 and hold in idle status) 10 Key lock on/off (press and hold) 11 Recall key - Confer (flash) 9 - Dialling pause 10 (press and hold) Microphone Alarm clock key Handsfree key (only Gigaset A260/A265)
2 11.12. INT
Registration/Paging key (page 8/page 8)
Pressing the keys launches whichever function that appears above them in the display. Display icon Function when pressed Call all registered handsets. Open main/submenu (see Menu tree, page 12). Go back one menu level. Scroll up/down or adjust volume with u. Move cursor to left/right with u. Backspace deletes one character at a time. Confirm menu function or save entry.
A 8 - M- A 1 - 1 - UZ 1 9
Issued by Gigaset Communications GmbH Schlavenhorst 66, D-46395 Bocholt Gigaset Communications GmbH is a trademark licensee of Siemens AG Gigaset Communications GmbH 2008 All rights reserved. Subject to availability. Rights of modification reserved. www.gigaset.com This user guide is made from 100% recycled paper.
Base station with answering machine at a glance
Safety precautions W
Read the user guide and the safety precautions carefully before use. Explain their contents to your children, and the potential hazards associated with using the telephone. Only use the mains unit supplied.
Fit only the approved rechargeable battery pack! Never use a conventional (non-rechargeable) battery pack as this could damage your health and cause injury. Use the battery pack as directed in this user guide (page 3). The operation of medical appliances may be affected. Be aware of the technical conditions within the particular environment (e.g. doctor's practice). Do not hold the rear of the handset to your ear when it is ringing or when the handsfree function is activated. This can cause severe, permanent hearing damage. The handset may cause an unpleasant humming noise in hearing aids. Do not install the phone in a bathroom or shower room. The handset and base station are not splashproof. Do not use the telephone in environments subject to explosion hazard (e.g. auto paint shops).
1 Registration/Paging key: Page handsets (press briefly, "Paging", page 8). Register handsets (press and hold, page 8). 2 On/Off key: activate and deactivate answering machine. Lights up: answering machine is activated. Flashes: there is at least one new message or message is in the process of being recorded. Flickers for about four seconds: memory is full. During message playback: 3 Delete current message. 4 Skip to previous message. 5 Adjust volume ( = quieter; = louder): During message playback: adjust volume. While an external call is being signalled: adjust ringtone volume. 6 Playback/stop key: Play back messages from the answering machine, or cancel playback. 7 Skip to next message. Please note:
If you give your Gigaset to someone else, make sure you also give them the user guide.
If the answering machine is being operated
from a handset or if it is recording a message, it cannot be operated from the base station. If the On/Off key flashes although the answering machine is switched off, it means that there is still at least one new message that has not been played back yet.
All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. This crossed-out wheeled bin symbol on the product means the product is covered by the European Directive 2002/96/EC. The correct disposal and separate collection of your old appliance will help prevent potential negative consequences for the environment and human health. It is a precondition for reuse and recycling of used electrical and electronic equipment. For more detailed information about disposal of your old appliance, please contact your local council refuse centre or the original supplier of the product. Emergency numbers cannot be dialled if the key lock (page 1) is activated! Not all of the functions described in this user guide are available in all countries.
Setting up the telephone for use
Step 1: Connecting the base station
Step 2: Setting up the handset
Note: The display is protected by a plastic film. Please remove the protective film!
Fitting the battery pack
Place the battery leads in the cable guides so that the battery cover cannot catch on the leads and damage them when it is closed. Use only the rechargeable battery pack recommended by Gigaset Communications GmbH * (page 9), i.e. never use a conventional (nonrechargeable) battery pack as this may cause significant damage to health and property. For example, the outer casing of the battery pack could be destroyed or the battery pack could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type. Only use the battery charger supplied. Only place the handset in the charging cradle that is intended for it.
* Gigaset Communications GmbH is a trademark licensee of Siemens AG.
Base station with answering machine
First connect the mains unit (230 V) to power cord 1 and then connect the phone jack to phone cord 2, as shown above. Place the cords in the cord recesses. The two cords must be plugged in at all times. Only use the mains unit supplied. If you ever purchase another phone cord from a store, ensure that the phone conductors are correctly connected: 3-4 connection of the telephone conductors/EURO CTR37.
Insert the plug into the socket as shown in the
Insert the battery pack. Place the cords in the cord routing.
Closing the battery cover Insert the cover into the top end of the battery compartment and press down until it clicks into place.
Opening the battery cover Place your fingernail between the cover and the housing and pull the cover upwards.
Step 3: Registering the handset to the base station and charging the battery pack
Precondition: The handset is not already registered to a base station. Registering the handset to the Gigaset A160/A260/ A165/A265 base station occurs automatically. Place the handset in the charging cradle of the base station with its display facing forward. You will hear a confirmation tone. Leave the handset in the base station until it is registered. Automatic registration can take up to 5 minutes. While this is happening, Registering flashes in the screen. The handset is assigned the lowest unassigned internal number (14). If several handsets are registered to the base station, the internal number is shown in the top left of the display after registration, e.g. 2. If the internal numbers 1 to 4 have already been assigned (four handsets have already been registered), handset number four is de-registered and overwritten.
Making external calls and ending a call
External calls are calls using the public telephone network. ~ (Enter the phone number) c. The number is dialled. (Or you can first press and hold c [dial tone] and then enter the number.) During the call you can adjust the earpiece volume using u. End the call/cancel dialling: Press the end call key a. You can automatically insert a network provider dialling code before any phone number (see "Preselection" Menu tree, page 12).
Answering a call
An incoming call is indicated by ringing, by a flashing handsfree key d (Gigaset A260/A265) and a display on the screen. You can answer the call by: Pressing the talk key c. Press the handsfree key d (Gigaset A260/ A265). When Auto Answer is activated (see Menu tree, page 12), simply remove the handset from the base station/charging cradle.
Charging the battery pack
To charge the battery pack, leave the handset in the base station for approx. 13 hours for the Gigaset A160/A260 or approx. 6 hours for the Gigaset A165/A265. The battery pack is now fully charged. The charge status of the battery pack is correctly displayed only after uninterrupted charging/discharging. Therefore you should not interrupt the charging procedure. Charging is electronically controlled to prevent the battery pack from overcharging. The battery pack heats up during charging. This is normal and not dangerous. After a time its charge capacity will decrease for technical reasons. You must set the date and time to ensure that the times of calls are logged correctly (see Menu tree, page 12). Once the phone is registered and the time set, the idle display looks as shown on page 1.
Displaying the caller's phone number
When you get a call, the caller's phone number will be displayed on your handset; or the caller's name will be displayed if it is stored in the directory or if CNIP has been requested. Requirements: 1 You have asked your network provider for the caller's phone number (CLIP) or name (CNIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his phone number to be identified (CLI). appears in the display if you have not requested Calling Line Identification, Withheld appears if the caller has withheld CLI, and Unavailable if CLI has not been requested by the caller.
Handsfree talking (only Gigaset A260/A265)
Once you have entered the phone number you can immediately call in handsfree mode by pressing d (the d key lights up continuously). During a call and when playing back the answering machine (if available) you can switch between earpiece and handsfree mode by pressing d. Set the handsfree volume with u.
Operating the handset
Activating/deactivating the handset
Press and hold the end call key a. If you place a deactivated handset in the base station or charging cradle, it will automatically activate.
The following functions can be selected with u:
Show Number Use Number
Display the phone number. Edit or add to a saved number. Then dial or use other functions with MENU. Edit selected entry. Delete selected entry. Send a single entry to another handset (page 5). Delete all directory entries. Send the complete list to another handset (page 5). For speed dial, assign the current entry to a key.
Edit Entry Delete Entry Send Entry Delete List Send List Shortcut
Using the directory and lists
To open the directory: press h (Gigaset A160/ A165) or v (Gigaset A260/A265). You can save up to 40 phone numbers (max. 32 digits) with corresponding names (max. 14 characters). Note: You can assign a number from the directory to a key for speed dial (page 5).
Using speed dial keys
Press and hold the required speed dial key.
Sending the directory to another handset
Preconditions: The sending and receiving handsets must both be registered to the same base station. The other handset and the base station can send and receive directory entries.
Saving the first number in the directory h or v New Entry? OK ~ ~
Enter number and press OK. Enter name and press OK.
Saving a number in the directory h or v MENU New Entry OK ~ ~
v u (Select entry) MENU Send Entry / Send List OK ~ (Enter the internal number
of the receiving handset)
Last number redial list
This list contains the ten last dialled numbers.
Dialling from the last number redial list c c
Press the key briefly. Select entry. Press the talk key again. The number is dialled.
lowing options: Use u to scroll to the entry until the required name is selected. Enter the first character of the name or scroll to the entry with u, if required.
Selecting a directory entry Open the directory with h or v. You have the fol-
Managing entries in the last number redial list c
Press the key briefly. Select entry. Press the display key.
Dialling with the directory v u (Select entry) c
Using other functions
v v (Select entry) MENU
You can select the following functions:
Use Number Copy to Dir. Delete Entry Delete List
(as in the directory, page 5) Copy an entry to the directory (as in the directory, page 5) (as in the directory, page 5)
Calling back a caller from the list f CallsList 01+02 OK u (Select entry) c
Additional functions for devices with answering machines
Answering machine list
You can use the answering machine list to listen to the messages that are on the answering machine. The answering machine list is displayed as follows:
VoiceMail 01+02 Number of new messages + number of old, played back messages
Calls list/ answering machine (network mailbox) list
When a new message arrives in the calls/answering machine list, an advisory tone sounds and the display blinks. The display also shows a message. When you press the f key, all the lists are displayed. If only one list contains new messages, this will be opened automatically. Note:
If calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made (depending on your network provider).
Opening the answering machine list f VoiceMail 01+02 OK
The playback starts.
Precondition: CLIP (page 4) The numbers of the last 20 missed calls are saved. Multiple calls from the same number are only saved once (the last call). The calls list is displayed as follows:
CallsList 01+02 Number of new entries + number of old, read entries
u (Select entry) MENU
Continue Volume Copy to Dir. Show Name
The following functions can be selected with u: Resume paused playback (see page 7). Set the volume. Copy an entry to the directory. If you have requested CNIP, you can show the name and town that are registered for your phone number with your network provider. Delete all old messages.
Opening the calls list f CallsList 01+02 OK Select entry with u. The last incoming call is displayed in the calls list.
Delete all old
Delete Entry Copy to Dir. Date/Time Status
The following functions can be selected with u: Delete current entry. Copy an entry to the directory. Call date and time (if set). New Call: new missed call. Old Call: entry already read. Answ.: call taken. If you have requested CNIP, you can show the name and town that are registered for your phone number with your network provider. Caution! All old and new entries will be deleted.
Automatic network provider code (preselection)
See Menu tree, page 12.
Using the answering machine (A165/A265)
The answering machine can be operated both via the handset (see Menu tree, page 12) and via the keys on your base station (page 1).
Activating/deactivating the answering machine Icon appears in the display. The key lights up
on the base station. The telephone is supplied with a pre-recorded announcement. This pre-recorded announcement is used if no personal announcement is available.
If the memory is full the answering machine switches itself off automatically. It activates again automatically when you delete old messages.
Activating/deactivating listening in
During the recording of a message you can listen in via the base station loudspeaker and the registered handsets (only Gigaset A265), see Menu tree, page 12.
Recording your own announcement
See Menu tree, page 12. You hear the ready tone (short tone). Now speak your announcement (at least 3 sec.). Press OK to confirm or press a or to reject your recording. After recording, the announcement is played back for you to check. Please note: Recording ends automatically when the max. recording time of 170 seconds is reached or if there is a break in speaking of more than 2 seconds.
Setting up the answering machine
The answering machine has already been preset at the factory. Make individual settings using the handset.
Setting call acceptance
You can set when you want the answering machine to accept a call. MENU Voice Mail OK Ring Delay OK Select Immediately / 10 sec / 20 sec / 30 sec / Auto OK ( = on)
Playing back or deleting announcements
Playback begins with the first new message. Playing back old messages See answering machine list, page 6. Stopping and controlling playback During message playback:
Setting the recording time
Setting a different language
You can change the language used for voice prompts and the pre-recorded announcement. MENU (starts the procedure). Select the language: 1 (English), 2 (French), 3 (Arab), 4 (beep). Press OK to confirm. In the "beep" setting, certain answering machine phrases are replaced by tones. The remaining phrases and the pre-recorded announcements are played back in English.
Stop playback: Press 2 again to resume Go to the start of the current message. To the previous message. To the next message. To the next message but one.
Reading CNIP information of a message Please read page 6. Deleting an individual message While playback is paused, press the display key. Deleting all old messages During playback or pause:
Assigning key 1 for speed dial to the answering machine (network mailbox)
Simply press and hold key 1 on the handset and you will be connected directly to the answering machine (network mailbox). See Menu tree, page 12.
Delete all old OK (Confirm the secu-
Picking up a call from the answering machine
You can still answer a call while the answering machine is recording it by pressing c or d (handsfree). Recording stops and you can speak to the caller.
Registering corresponding handsets
You can register up to four handsets on your base station. For automatic registration of handsets to Gigaset A160/A260/A165/A265, see page 4.
Listening in to an external call
You are conducting an external call. An internal caller can listen in on this call and take part in the conversation. All the participants are made aware of the 'listening in' by a beep. Precondition: The Listening in function must be activated.
Manual registration of handsets to A160/A260/ A165/A265
1. On the handset: MENU Settings OK Handset OK Register HS Enter the system PIN of the base station (default is 0000) OK. Registering flashes in the display.
Activating/deactivating internal listening in
Settings OK Base OK Listening in OK ( = on)
Internal listening in
You want to listen in to an existing external call. Press and hold the talk key c. You are linked into the call. All participants hear a beep. To end: press the end call key a. All participants hear a beep. If the first internal participant presses the end call key a, the handset that has 'listened in' remains connected to the external caller.
2. On the base station: within 60 sec. of entering the system PIN, press and hold the registration/ paging key or (page 1) (min. 1 sec.). Registration can take up to 5 minutes.
Locating a handset ("Paging")
You can locate your handset using the base station. Briefly press the registration/paging key or on the base station (page 1). All handsets will ring at the same time ("paging"), even if the ringtones are switched off. End paging: briefly press the register/paging key or on the base station (page 1) or the talk key c on a handset.
Change display language
MENU Settings OK Handset OK Language OK Select the language
Using several handsets
Making internal calls
Internal calls are no-cost calls to other handsets that are registered to the same base. Press the INT display key. All handsets are called. When an internal participant answers you can speak to them. To end the call, press a.
If you accidentally choose a language you do not understand: MENU 1 (Press the keys one after the other)
The current language is indicated by.
Select the correct language with u and press OK.
Setting the alarm clock
Activating/deactivating the alarm clock
Internal consultation call/connecting a call
You are in conversation with an external participant. Press the INT display key. All handsets are called. The external participant hears the hold music. Before the internal participant has answered, press the end call key a; the call is forwarded to the participant who answers the call. After the internal participant has answered, you can talk to him. Press the end call key a; the call is forwarded, or press the display key; you are reconnected to the external participant.
Or: Press the alarm clock key g. When the alarm clock rings, press any key to switch it off for 24 hours.
Alarm Clock OK Activation OK ( = on)
Setting the wake up time
Enter the wake up time in hours and minutes, then press OK.
Alarm Clock OK Wake-up time OK
Resetting the handset
You can reset any individual settings and changes that you have made. Entries in the directory, the calls list and the handset's registration on the base station will be retained. MENU Settings OK Handset OK Reset Handset OK
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key c and sending the phone number.
Cancel the reset with a.
MENU IIO1O The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec. Enter number OK.
Changing the pause after the recall key MENU I I O The number for the current
pause length flashes: 1 = 800 ms; 2 = 1600 ms; Enter number OK. 3 = 3200 ms
Base station settings
The base station settings are carried out using a registered handset. For details on how to set the system PIN for the base station, and for how to select the ringtone volume and melody on devices with answering machines, see Menu tree, page 12.
Entering special characters
Standard characters 1x
Restoring the base station to the factory settings
When the settings are restored all handsets are deregistered. The individual settings are reset. Only the date and time are retained. MENU Settings OK Base OK Base Reset OK If you have forgotten your system PIN you can reset the base station to the original code 0000: Disconnect the power cord from the base station. Hold down the registration/paging key or (page 1) on the base station while reconnecting the power cable to the base station at the same time. If your device has an answering machine you will also hear a beep. The base station has now been reset and the system PIN 0000 set.
2x 1 , /
3x ? ( #
4x $ ! ) @
5x 0 < \
6x + = &
Recommended battery pack
(Valid at the time of going to press) Nickel-metal-hydride (NiMH): Handset A16: V30145-K1310-X383 Handset A26: V30145-K1310-X359, X402 The handset is supplied with the recommended battery pack.
Operating the base station on the PABX
The following settings are only necessary when your PABX requires them, see the PABX user guide.
Base station power consumption
In standby mode: approx. 2W During a call: approx. 3W
1 The number for the set dialling mode flashes: 0 = Touch tone dialling (DTMF); 1 = Dial pulsing (DP) Enter number OK.
Changing the dialling mode
DECT standard GAP standard Range is supported is supported up to 300 m outdoors, up to 50 m in buildings
Setting the flashing time MENU I I O The number for the current flashing time flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; Enter number OK. 6 = 600 ms; 7 = 800 ms
Base station power supply 230 V ~/50 Hz Environmental conditions +5 C to +45 C; in operation 20% to 75% humidity
Wipe the base station, charging cradle and handset with a damp cloth (do not use solvent) or an antistatic cloth. Never use a dry cloth. This can cause static.
Contact with liquid
If the handset has come into contact with liquid: 1 Switch off the handset and remove the battery pack immediately. 2 Allow the liquid to drain from the handset. 3 Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc.). 4 Do not switch on the handset again until it is completely dry. When it has fully dried out, you will normally be able to use it again.
Questions and answers
If you have any queries about the use of your phone, you can contact us any time at www.gigaset.com/customercare. The table below contains a list of common problems and possible solutions. Problem Cause Solution
Nothing The handset is not Press the end call key appears in the switched on. a for approx. 5 sec. display. or place the handset in the base station. Charge/replace the Battery pack is battery pack (page 4). flat. No reaction to The key lock is Press the hash key R keystroke. activated. for approx. 2 sec. (page 1). Move the handset The handset is No wireless connection to outside the range closer to the base station. the base sta- of the base station. tion, Base flashes in the The handset is not Register the handset (page 4). registered. display. The base station is Check the power not switched on. connector at the base station (page 3). Cords not routed Check cord routing (page 3). correctly
Service (Customer Care)
You can get assistance easily when you have technical questions or questions about how to use your device by using our online support service on the Internet at: www.gigaset.com/customercare This site can be accessed at any time wherever you are. It will give you 24/7 support for all our products. It also provides a list of FAQs and answers plus user guides for you to download. You will also find frequently asked questions and answers in the Questions and Answers section of this user guide in the appendix. If the device needs to be repaired, please contact one of our Customer Care Centers: Abu Dhabi.800 Argentina. 0800-888-9878 Australia.366 Austria. 04 (0,065 Euro/Min.) Bahrain.173 Belgium. 79 Bosnia Herzegovina. 649 Brazil. Grande Capitais e Regies Metropolitanas:. (11) 4003 3020.R$ 0,14 (US$ 0,069) Demais localidades:. 3020.R$ 0,20 (US$ 0,098) Bulgaria. Canada.8758 China. 6007 (RMB 0.11) Croatia. 01 / (0,23 Kn) Czech Republic. 727 Denmark. Dubai.944 Egypt. Finland. 25 France. 00 (Appel national) Germany.222 (0,14 Euro/Min. aus dem Festnetz der Deutschen Telekom. Fr Anrufe aus den Mobilfunknetzen knnen abweichende Preise gelten) Greece. 500 (0,026 Euro) Hong Kong. 2763 0203. Hungary. 44 (27 Ft) India.Please refer to your. local warranty card Ireland. 77 Israel. Italy. 184.108.40.206 Jordan. 5625460/1/2 Kuwait. 00965-2464993 Latvia. Lebanon. 00961-1236110 Luxembourg. 40 Malaysia.Malta. +Mexico.4442738 (Gigaset) Netherlands.0900-3333102 (0,25 Euro/min.) New Zealand. 63 Norway. Oman. 281 Poland. Portugal. (351) 223 Romania. +4.021.529.7114. Russia. 8 (495) Serbia. 111 Singapore. Slovak Republic. 66 (4,428 sk) Slovenija. 36 South Africa. 57 Spain. Sweden. Switzerland. 000 (0,08 SFr./Min.) Taiwan. 24343 Thailand. 1118 Turkey.Ukraine.+380-44-451-71-72 United Arab Emirates. 86 United Kingdom. USA. 1-866 247-8758. (toll free)
Please have your record of purchase ready when calling. Replacement or repair services are not offered in countries where our product is not sold by authorised dealers.
Your phone has an extensive range of features. These are offered in the form of menus. With the phone in the idle status, press MENU (open menu), scroll to the required function and then press OK to confirm your choice. 1
To return to idle status: press and hold key a. There are two ways in which you can access a function: Scroll with keys t and v, Key in the appropriate digit combination, e.g. MENU I 1 to set the date and time.
Activation Wake-up time Activating/deactivating the alarm clock Input format: HHMM
Ringer Volume Ringer Melody 5 levels + "Crescendo" selectable 2-2-1 2-2-2 2-2-3 External Calls Internal Calls Alarm Clock 10 ringtones, selectable for external calls 10 ringtones, selectable for internal calls 10 ringtones, selectable for alarm clock
Advis. Tones Battery Low
Activating/deactivating 2-4-1 2-4-2 2-4-3 Off On During Call Tone when battery pack is almost flat: never always only during a call
Date/Time Handset Enter date (DDMMYY format), then time (HHMM format) 3-2-1 3-2-2 3-2-3 3-2-4 Language Auto Answer Register HS Reset Handset Set the display language Activate/deactivate auto answer Manually register the handset Reset the handset Ringer Volume Ringer Melody 5 level settings + "Crescendo" + OFF 10 selectable melodies
Audio Settings (only 3-3-1-1 Gigaset A165/A265) 3-3-1-2
3-3-2 3-3-3 3-3-4 3-3-5
System PIN Base Reset Listening in Preselection
Change system PIN (default is 0000) Restore factory settings (system PIN does not change; handsets are de-registered) Activate/deactivate the function 3-3-5-1 Presel. Number Network provider dialling code, should be inserted automatically before the dialled phone number. First digits of the dialling codes, should be dialled with preselection. First digits of dialling codes, should be dialled without preselection.
Set Key 1 (all devices) 4-1-1 Netw. Mailbx
Assign key 1 with answering machine or network mailbox (in idle status, press and hold to dial). Netw. Mailbx: your network provider's answering machine; must be requested separately. The network mailbox can be displayed if your network provider supports this function and if key 1 has been assigned with the network mailbox.
4-1-2 4-2 4-3 Answer Mach. Listening in 4-3-1 4-3-2 4-4 Announcements 4-4-1 4-4-2 4-4-3 4-5 Message Length 4-5-1 4-5-2 4-5-3 4-5-4 4-6 Ring Delay 4-6-1 4-6-2 4-6-3 4-6-4 4-6-5
Handset Base Rec announce Play announce Del announce Maximum 30 sec 60 sec 120 sec Immediately 10 sec 20 sec 30 sec Auto If no new messages are present, the answering machine accepts a call after 20 seconds. If new messages are present, the answering machine accepts a call after just 10 seconds.
A 8 - M- B 1 - 4 - 1 9
Issued by Gigaset Communications GmbH Frankenstr. 2, D-46395 Bocholt Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. As of 1 Oct. 2011 Gigaset products bearing the trademark "Siemens" will exclusively use the trademark "Gigaset". Gigaset Communications GmbH 2009 All rights reserved. Subject to availability. Rights of modification reserved. www.gigaset.com This user guide is made from 100% recycled paper.
TME-M580 MRF-250 ES-8163 Nokia 2660 TCE7124W Nomad Poulan 2050 171MP DH-200 HTR-5230 PY90DG KH 6525 Tropico Tundra T823V Toshiba P300 Ibanez WD7 System LN40C630 DVR98 HS-30W ZW6500R Silver Evo3 Philips FW56 RDC-7 1 Instructions DVD-S510 Century 1993 MP150 47WLT66 MFC-5890CN 1604vlzpro Magic NC4400 Motorola V186 Wl-322 CM-300 Black Sunbeam 4713 42LC2D DSC-P51 HBA23B150S Budokai 3 User Manual BD239R KX-TG7100NE Aficio 450E Machine TCM-450DV Mobile 330I-E90 3985 WPS Laserjet 2840 MDS-S37 Printer Pokedex Sensor 2 1051-VHF DSP-R992 Sony NT-2 FJS1225 Duo ES526 AXN 700 Radar FS620 X6570 Headset X PM-930C GT-E1360M Exacto SC-HT540 Warmer SCX-4720F HT762TZR Samsung 152N Muvo V200 PF-800 FLS562C PB-100-TRS-80- RCU800 P6-24B RDR-HX520 WMH1164XW Classic LL-T15a1 EY7410 836 AN 2243BWX KDL-26M4000 R Dartybox 600-1998 SR-L36NEB 20-0405 SGH-X550 Blackbox WM2377CW LTV-32W6 HD TX-850 AE3450 WGR614 V5 ES-1124 SP101
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101