Reviews & Opinions
Independent and trusted. Read before buy Siemens Gigaset AS180!

Siemens Gigaset AS180

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (French)
Siemens Gigaset AS180, size: 667 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Siemens Gigaset AS180About Siemens Gigaset AS180
Here you can find all about Siemens Gigaset AS180 like manual and other informations. For example: review, dect, duo.

Siemens Gigaset AS180 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Siemens Gigaset AS180 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Siemens Gigaset AS180 photo ]

Video review

SHOPPING QUEEN SIEMENS GIGASET AS180 opinion.mp4

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Gigaset AS180 / AS185

Environmental Product Declaration according to ISO 14021

Gigaset AS180/AS185

1 Our environmental mission
We at Gigaset Communications GmbH* have a responsibility to society. Our convictions make us dedicated to help create a better world. We demonstrate this through our ideas, technologies and actions that serve people, society and the environment. Moreover, the goal of our worldwide activities is to safeguard the foundations of human life. We acknowledge our responsibility for our products over their entire lifecycle. The impact of our products on the environment is assessed in product and process planning, during which we take production, procurement, sales, usage, service and disposal into account.

2 Manufacturer

Gigaset Communications GmbH Hofmannstrae Munich Germany Phone: +49 (0)89 722-0 Registered offices of the company: Munich Commercial register: HR A 86401 (Munich Local Court) VAT reg. no.: DE 814469745 Tax number: 146/636/25500 WEEE reg. no.: DE 47474747 More information is available at: http://gigaset.com
3 Environmental management system
Gigaset Communications GmbH is certified according to the quality standards EN ISO 14001 and ISO 9001.
14001 (Environment), certified since September 2007 by TV SD ISO Management Service GmbH 9001 (Quality), certified since February 17, 1994 by TV SD ISO Management Service GmbH
* Gigaset Communications GmbH is a trademark licensee of Siemens AG.

4 Product description

G igaset AS180/AS185 When it comes to making your calls, the Gigaset AS180 and AS185 give you the freedom to chat at length. Stay in touch with your friends and family for as long as you like with their long talk time of up to 25 hours. During your long calls, enjoy brilliant sound quality thanks to High Sound Performance technology. With a standby time of up to 210 hours, the Gigaset AS180 and AS185 are reliable phones that are expandable to up to four handsets. And in case youre out when a call comes in, the Gigaset AS185 will collect your messages on its integrated answering machine with 12 minutes recording time. The AS180 and AS185 also help you to protect the environment with energy-saving ECO DECT technology, which uses up to 60% less energy compared to our conventional cordless phones. Simplicity and reliability combined in one the Gigaset AS180 and AS185 with their brilliant sound quality are perfect for those looking for a lasting enjoyment of calls.
Product details Device Usage Standards Gigaset AS180/AS185 Analog connection / private branch exchanges DECT, GAP Cordless analog phone, with/without answering machine Brilliant sound quality with HSP Indoor range up to 50 m, outdoor range up to 300 m Standby time 210 hours, talk time up to 25 hours Phonebook for up to 40 entries Illuminated b/w display Caller indentification displayed via CLIP1 Missed call list with last 25 calls Eco DECT for up to 60% less energy consumption2 Gigaset AS185: integrated answering machine with up to 12 minutes recording time
1] Dependent on country/network/operator 2] In comparison to our conventional cordless phones
5 Ecological power use Eco DECT in the Gigaset AS180 / AS185
Eco DECT saves energy and makes an active contribution to environmental protection. Eco DECT addresses the following points: Switched-mode versus conventional power supply 1 The use of switched-mode power supplies (A) in the base station cuts consumption by up to 60% . compared to conventional power supply units (B).
4 3,5 Power consumption in W 3 2,1,B 0,Handset in base station Base station during calls A B A
Phone use averaging one hour per day results in a yearly savings of approximately 18 kWh.
2. The new Eco DECT function complements this adjustment: the transmission power of the handset and base station in idle mode are automatically reduced to zero if the handset is in the base station and only one handset has been registered. 3. customers select Eco Mode, they can also manually reduce the transmission power of the base If station and handset by 80%; in Eco Mode Plus the transmission power in standby can be reduced by 100%. Also, the handsets power consumption can be cut by 31%, thereby increasing talk time by 45%. However, this reduces the range to about half the distance.

Power reduction for handset

mA 10 0

Eco Mode Activated Eco Mode Deactivated
4. many years, Gigaset DECT handsets have enabled the automatic adjustment of transmission For power depending on the distance to the base station. For example, transmission power is reduced by approximately 80% at a distance of up to five meters.
6 Environmental protection begins in the product creation phase
Gigaset AS18H handset + AS180 base station
Loudspeaker 2,12% LCD with holder 3,31% Alloyed steel 0,26% Unalloyed steel 0,40%
Printed circuit board 11,68%
Copper cable with plug 10,26%

ABS 43,53%

Plug-in power supply 13,41%
Battery 7,94% Elastomer compound 6,29%
Other electric compounds 0,79%

7 Material savings

1. Thin-wall technology Over the last few years, thin-wall technology has been successfully implemented in phone cases. During this time, wall thicknesses have been reduced from 2.5 mm to 2.3 mm and now average about 1.8 - 2 mm. This corresponds to a granulate savings of more than 20%, without sacrificing mechanical stability or robustness.
Granulate savings with thin-wall technology

20% granuate savings

Granulate consumption now
2. Packaging Optimisation The size and weight of the packaging has been optimised to be in accordance with shipping standards. The primarily aims of this is to reduce transportation costs for the entire product portfolio. The basic purpose of primary packaging is to protect the product. Drop and continuous shock testing (simulating transportation) are required. We use LD-PE film to protect the surfaces of certain parts, as well as 100% recycled corrugated cardboard as packing material. Film usually accounts for around 4% of the total packaging. Both the film and cardboard can be recycled.

8 Manufacturing

1. Environmental requirements The Gigaset AS180 and AS185 are manufactured exclusively in Germany. Gigaset Communications attaches prime importance to compliance with all relevant laws and regulations. Through its management system and environmental performance Gigaset Communications is able to meet these requirements and continues to improve. It goes without saying that Gigaset Communications also respects all local environmental requirements.
2 . Effects of automation The high degree of automation in Gigaset Communications production processes has a limited impact on the environment through energy saving and efficient machine utilization. For example, the electronic circuit board of these devices is produced solely on a production line with a cycle time under 6 seconds and an efficiency greater than 75%.

3. Manufacturing concepts Gigaset Communications believes in a short feedback path for testing. All process parameters are controlled cyclically so that any problems can be detected promptly (before they arise) and nonconformance is minimized. Every step in the value chain is checked separately to help identify potential errors at an early stage. Process controls and short feedback paths for testing therefore minimize material waste (components and process aids). Rejects are continuously monitored with the goal of achieving a rate of less than 1%.
4. Refuse disposal Packaging material and electronic scrap are strictly separated in environmental islands at Gigaset Communications production facilities and recycled by local service providers. To reduce volume, the individual materials are compacted by roller presses. The compaction ratio for cardboard boxes is, for example, 6:1. This enables more efficient transportation of around 800 tons of cardboard per year.
5. Work safety Gigaset Communications is especially committed to protecting the health and safety of its manufacturing employees. This is why Gigaset Communications takes such great care to protect its employees at their workplace. This includes steps such as responsible management, instruction, sensitization and process engineering, prevention of and planning for emergencies, systematic investigation into the causes of accidents, quick availability of medical aid, documentation, regular reporting and continuous improvement.

compaction ratio

uncompressed compressed

9 Transport packaging

All suppliers of packaging to Gigaset Communications GmbH are members of RESY (Organisation fr Wertstoff-Entsorgung GmbH). RESY, an organization for the disposal of valuable materials, was established in light of the German Packaging Ordinance. This ensures the return and recycling of paper and cardboard packaging used in transportation within Germany. Each user is given a four-digit ID that, along with the RESY symbol, must be printed clearly and visibly on paper and cardboard transport packaging. A ll secondary packaging has the RESY symbol on it to indicate that the specifications of the Packaging Ordinance for transport packaging have been met.

Packaging

LD-PE film 4%

cardboard/paper 96%

10Distribution
W hen goods are shipped to the customer, they are consolidated regionally at the Siemens AG level and then distributed as part of the IDS network. As a result, the cargo space in each means of transport is optimized. T he Siemens Logistics Network (SLogN) is the basis for the efficient and secure movement of goods. The core of this transport network is a pool of highly qualified service providers who offer the best prices and performance thanks to the pooling of Siemens-wide needs. The use of transportation resources is being optimized by continuing improvements in the size of product packaging. The packaging units of our suppliers are optimized ahead of procurement to ensure the means of transport is fully loaded (e.g. containers in the case of sea freight). I n overseas logistics chains, we try to ensure that marine transport is used as frequently as possible. Transportation of goods by rail or inland waterway is preferred over trucks because it reduces emissions by 50%. Air freight for transporting goods internationally is the exception and out of principle shipment by sea has priority.

11Disposal

Our takeback concept I n accordance with European directives on the disposal of electrical waste and electronic equipment (2002/96/EC), packaging (94/62/EC) and batteries (2006/66/EC), these waste materials may not be thrown away as domestic refuse. The relevant national statutory regulations must be observed and the waste must be disposed of via the approved channels.

12Our service concept

In case of If a device should ever prove faulty, it is not replaced by a new one but repaired and returned free of defects to the customer. This concept has significant advantages. When devices are replaced by previously repaired products, the law requires that cosmetic parts, such as cradles, receiver insets or microphones, are also replaced. Our service concept eliminates this, which saves materials and resources.
This product environmental statement is not a warranty for the qualities of a product. It also does not warrant that the product retains a specific quality for a specific length of time. It is for information purposes only. We reserve the right to modify product design and specifications without prior notice. Please contact your Siemens representative to get the latest information. Gigaset Communications GmbH is a trademark licensee of Siemens AG.

doc1

AS180 DUO / Singapur EN / A31008-M2002-Z201-2-6C19 / Overview.fm / 25.03.2010

Gigaset AS180/AS180DUO

The handset at a glance
1 Charge status of the batteries 2 Display keys 3 Message key Flashes: new messages received 4 Directory key 5 Control key (u) 6 Talk key 7 End call and On/Off key 8 Ringer on/off (press and hold in idle status) 9 Keypad lock on/off (press and hold) 10 Recall key - Consultation call (flash) - Dialling pause (press and hold) 11 Microphone 12 "Microphone off" key
Display keys on handset: Pressing a key launches the function that appears above that key in the display.

Display icon

Function when pressed

11.12. INT

11:56 MENU
Call other registered handsets page 9. Open main/submenu (see page 13). Menu tree Go back one menu level. Scroll up/down or adjust volume with u. Move cursor to left/right with u. Backspace deletes one character at a time from right to left. Confirm menu function or save entry.
The base station at a glance
AS180/AS180DUO base station
Registration/paging key: page 9) Search for handsets (press briefly, "Paging" page 9). Register handsets (press and hold

Safety precautions

Read this user guide and the safety precautions carefully before use. Explain their content and the potential hazards associated with using the telephone to your children.
Wipe down the base station and handset with a damp cloth (no solvents) or an antistatic cloth. Never use a dry cloth. This can cause static.
Only use the mains adapter supplied.

Contact with liquid

Fit only the recommended, rechargeable page 11), i.e. never use any other batteries ( battery type or non-rechargeable batteries as this could result in significant health risks and personal injury. The operation of medical appliances may be affected. Be aware of the technical conditions in your particular environment, e.g. doctor's surgery. Do not hold the rear of the handset to your ear when it is ringing. Otherwise you risk serious and permanent damage to your hearing. The handset may cause an unpleasant humming noise in hearing aids. Do not install the phone in a bathroom or shower room. The handset and base station are not splashproof. Do not use your phone in environments with a potential explosion hazard, e.g. paint shops.
If the handset should come into contact with liquid: Switch the handset off and remove the batteries immediately. Allow the liquid to drain from the handset. Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc.). Do not switch on the handset again until it is completely dry. When it has fully dried out, you will normally be able to use it again.

ECO DECT

You are helping to protect the environment with your Gigaset AS180/AS180DUO.
If you give your Gigaset to someone else, make sure you also give them the user guide. Please remove faulty base stations from use or have them repaired by Service, as they could interfere with other wireless services. Disposal Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of which can be obtained from your local authority or the dealer you purchased the product from. All electrical and electronic equipment must be disposed of separately from general household waste using the sites designated by local authorities. If a product displays this symbol of a crossed-out rubbish bin, the product is subject to European Directive 2002/96/EC. The appropriate disposal and separate collection of used equipment serve to prevent potential harm to the environment and to health. They are a precondition for the re-use and recycling of used electrical and electronic equipment. For further information on disposing of your used equipment, please contact your local authority, your refuse collection service or the dealer you purchased the product from.

Reduced energy consumption
Your telephone has a power-saving adapter plug and uses less power.
Reduced transmission power
The transmission power of your telephone is reduced automatically: The handset's transmission power is reduced depending on the distance to the base station. The transmission power on the base station is reduced to virtually zero when only one handset is registered and the handset is in the base station. You can reduce the transmission power of the handset and base station even more by using Eco page 14): Mode/Eco Mode+ (see Menu tree Eco Mode: 80% transmission power reduction in standby mode and during a call (the range of the base station is reduced). Eco Mode+: 100% transmission power deactivation in standby mode (top left display icon ). Press and hold the talk key c to check that the base station can be reached. You will hear the ringing tone if the base station can be reached.
Emergency numbers cannot be dialled if the keypad lock page 1) is activated! ( Not all of the functions described in this user guide are available in all countries.
AS180 DUO / Singapur EN / A31008-M2002-Z201-2-6C19 / starting.fm / 25.03.2010

First steps

Check the pack contents
one Gigaset AS180/AS180DUO base station, one mains adapter, one Gigaset AS18H handsets, one phone cords, two batteries, one battery cover, one user guide. If you have purchased a model with multiple handsets, the package should contain two batteries, a battery cover and a charging cradle with mains adapter for each additional handset.
Setting up the base station and charging cradle (if included)
The base station and charging cradle are designed for use in enclosed dry rooms with a temperature range of +5C to +45C. Set up the base station at a central location on a flat, non-slip surface in your house or apartment.
Please note Pay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. page 14) is activated. The range is reduced when Eco Mode (
The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and polishes used on today's furnishings, the occurrence of marks on the surfaces cannot be completely ruled out. You can also mount the base station and charging cradle on the wall. Please note: Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices. Protect your Gigaset from moisture, dust, corrosive liquids and vapours.

Connecting the base station
First connect the mains adapter 1. Then connect the telephone jack 2 and
insert the cables into the cable ducts. Please note:
The mains adapter must always be connected, as the phone will not operate without mains connection. Only use the mains adapter and phone cord supplied. Pin connections on telephone cables can vary.
Connecting the charging cradle (if included)
Connect the flat plug from the power supply 1. Plug the mains adapter into the plug socket 2.
If you need to disconnect the plug from the charging cradle, press the release button 1 and disconnect the plug 2.
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries and closing the battery cover

Warning

Use only the rechargeable batteries ( page 11) recommended by Gigaset Communications GmbH. Never use conventional (non-rechargeable) batteries, as this could result in significant health risks and damage to property. For example, the outer casing of the batteries could be destroyed or the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type.
Insert the batteries the right way
round. The polarity is indicated in/on the battery compartment.
Slide the battery cover back into the
main casing until it clicks into place.
If you need to open the battery cover, for instance to replace the batteries, place your fingertip in the grooved area on the top of the cover and slide down.
Placing the handset in the base station and registering

Put into base MENU

Before you can use the phone, you must first register the handset to the base station.

Place the handset with

the display facing up in the base station.

Registering

The handset registers automatically. Registration can take up to 5 minutes. Do not remove the handset from the base station during this time.

INT MENU

After successful registration, the idle screen is displayed. Charge status of the batteries: = e V U (flat to full) = flashes: batteries almost flat e V U flashes: charging
If you have purchased a model with multiple handsets, repeat the registration process for each individual handset. Handsets are assigned the lowest available internal number (14). If more than one handset is registered to the base station, the internal handset number appears in the top left of the display, e.g. 2. If the internal numbers 14 are already assigned to other devices, number 4 will be overwritten.
Each key press interrupts the automatic registration. If automatic registration does not work, the handset will have to be registered manually (

Please note

Only place the handset in the base station or charging cradle that is intended for it.

page 9).

Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are first fully charged and discharged.
Place the handset in the base station or charging cradle for eight hours. Then remove the handset from the base station or charging cradle and do
not replace it until the batteries are fully discharged.
After the first battery charge and discharge you may replace your handset in the base
station or charging cradle after every call. Please note
Always repeat the charging and discharging procedure if you remove the batteries
from the handset and reinsert them.
The batteries may warm up during charging. This is not dangerous. After a while, the charge capacity of the batteries will decrease for technical reasons.
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be used.
MENU Settings OK Date/Time OK Date: ~ (enter the day, month and year in 6-digit format) OK Time: ~ (enter hours and minutes in 4-digit format) OK (display message: Saved) a (press and hold to return to idle status)
Please note When entering the time and date, you can move the position of an entry to the left or right by pressing the control button up or down.

Display in idle status

Once the phone is registered and the time set, the idle display is shown as in this example. 11.12. INT 11:56 MENU
the handset. If you place a deactivated handset in the base station or charging cradle, it will automatically activate.

Activating/deactivating the handset Press and hold the end call key a to activate or deactivate
Your phone is now ready for use! If you have any questions about using your phone, please read the tips on troubleshooting page 11) or contact our Customer Care team page 12. ("Questions and answers"
AS180 DUO / Singapur EN / A31008-M2002-Z201-2-6C19 / main.fm / 25.03.2010

Making calls

Making external calls and ending calls
External calls are calls using the public telephone network. ~ (Enter the phone number) c. The phone number is dialled. (Or you can first press and hold c [dial tone] and then enter the number.) During the call you can adjust the earpiece volume using t and set the volume with u. End the call/cancel dialling: Press the end call key a. You can automatically insert a network provider dialling code before any phone number (see Menu tree page 14). "Preselection"
Using the directory and lists

Directory

To open the directory: press h. You can store up to 40 numbers (max. 32 digits) and associated names (max. 14 characters). Enter letters/ page 11. characters
Saving the first number in the directory h New Entry? OK ~ (enter number) OK ~ (enter name) OK Storing a number in the directory h MENU New Entry OK ~ (enter number) OK ~ (enter name) OK Selecting a directory entry Open the directory with h. You have the following
Use u to scroll through the entries until the
required name is selected. options:

Accepting a call

The handset indicates an incoming call by ringing and by a display on the screen. Press the talk key c to accept the call. When Auto Answer is activated (see Menu tree page 13), simply remove the handset from the base station/charging cradle. In idle status, use t to activate the menu for setting the call volume and use u to set the volume.
Enter the first character of the name and scroll to
the entry with u, if required.
Calling Line Identification
When you receive a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory or if CNIP has been requested. Requirements: 1 You have asked your network provider for the caller's number (CLIP) or name (CNIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his number to be identified (CLI). appears in the display if you have not requested Calling Line Identification, Withheld appears if the caller has withheld CLI, and Unavailable appears if CLI has not been requested.

Dialling with the directory h u (select entry) c

Using other functions

h u (select entry) MENU
New Entry Show Number Use Number
The following functions can be selected with u: Save new phone number. Display the phone number. Edit or add to the number. Then dial or select other functions from the MENU. Edit selected entry. Delete selected entry. Send a single entry to another page 8). handset ( Delete all directory entries. Send the complete list to another page 8). handset ( For shortcuts, assign the current entry to a key.
Edit Entry Delete Entry Send Entry Delete List Send List Shortcut

Switch to mute

You can mute your handset when making external calls. Your caller can no longer hear you. Press the "Microphone off" key m during the call to activate/deactivate the function.

Using shortcut keys

You can assign directory entries to the keys 0 and 29:

Calls list

h u (select entry) MENU Shortcut OK ~ (press the key you want to assign the entry to)
To dial, press and hold the required shortcut key.
Transferring the directory to another handset
Requirements: The sending and receiving handsets must both be registered to the same base station. The other handset and the base station can send and receive directory entries.
Precondition: CLIP ( page 7) Depending on the type of list set, the calls list conpage 14) tains ( answered calls missed calls Depending on the type of list set, all numbers of the last 25 incoming calls are saved or just the missed calls are saved. The calls list is displayed as follows:

CallsList 01+02

Number of new entries + number of old, read entries

the receiving handset)

h u (select entry) MENU Send Entry / Send List OK ~ (enter the internal number of
Open the calls list f CallsList 01+02 OK
The last incoming call is displayed. If necessary, use u to select another entry. Using other functions

Last number redial list

This list contains the ten last dialled numbers.
Dialling from the last number redial list c (press briefly) u (select entry) c Managing entries in the last number redial list c (press briefly) u (select entry) MENU
You can select the following settings:

Use Number

u (select entry) MENU
Delete Entry Copy to Dir. Date/Time Status
The following functions can be selected with u: Delete current entry. Copy an entry to the directory. Call date and time (if set).
New Call: new missed call. Old Call: entry already read. Answ.: call taken.
Edit or add to the number. Then dial or select other functions from the MENU. Copy an entry to the directory.
Copy to Dir. Delete Entry Delete List

Show Name

Delete selected entry. Delete all entries.

Delete List

If you have requested CNIP, you can view the name and town that are registered for this phone number with your network provider. Warning! All old and new entries will be deleted.
Calls list/voicemail (network mailbox) list
An advisory tone sounds and the message key flashes as soon as a new entry appears in the calls list/voicemail list. A message appears in the display. When you press the f key, all the lists are displayed. If only one list contains new messages, this will be opened automatically. Please note: If calls are saved in the network mailbox, you will receive a message if the appropriate settings have been set (depending on your network provider).
Calling back a caller from the calls list f CallsList 01+02 OK u (select entry) c
Assigning key 1 for fast access to the network mailbox
Simply press and hold key 1 on the handset and you will be connected directly to the network mailbox. page 13. See Menu tree
Locating a handset ("paging")
You can locate your handset using the base station. Briefly press the registration/paging key on the page 1). base station ( All handsets will ring simultaneously ("paging"), even if the ringer tones are deactivated. End paging: briefly press the registration/paging key page 1) or the talk key c on on the base station ( a handset.
When a participant answers you can speak to them. To end the call, press the end call key a.
Internal consultation call/connecting a call
You are in conversation with an external participant. Press the INT key and call one or all handsets. The external participant hears the hold music. Before the internal participant has answered, press the end call key a; the call is diverted to the participant who answers the call. After the internal participant has answered, you can talk to him. Press the end call key a; the call is diverted, or press the display key ; you are reconnected to the external participant.

Registering handsets

You can register up to four handsets on your base station (Gigaset AS18H) recommended). Please note: Each additional handset must be registered on the base station in order for it to work properly! For automatic registration of handsets to page 5. Gigaset AS180/AS180DUO
Listening in to an external call
You are conducting an external call. An internal participant can listen in on this call and take part in the conversation (conference). Precondition: The Listening in function must be activated.
Manual registration of handsets to Gigaset AS180/AS180DUO

1. On the handset: MENU

Activating/deactivating listening in
MENU Settings OK Base Listening in OK ( = on)
Settings OK Handset OK Register HS OK Enter the system PIN of the base station (default is 0000) OK.
Registering flashes in the display.
Internal listening in (conference)
You want to listen in to an existing external call. Press and hold the c key. You can listen in to the call. All participants hear a signal tone. To end: press the end call key a. All participants hear a signal tone. If the first internal participant presses the end call key a, the handset that has "listened in" remains connected to the external participant.
2. On the base station: within 60 seconds of entering the system PIN, press and hold the registration/pagpage 1) (min. 3 seconds). ing key ( Registration takes approx. 1 minute.

De-registering handsets

Handsets can only be de-registered by resetting the base station to its default settings. This will also reset page 10. other settings If you have only registered handsets for other GAPcompatible devices, these can only be de-registered page 10. with a hardware reset

Setting the alarm clock

Activating/deactivating the alarm clock
MENU Alarm Clock OK ( = on)

OK Activation

When activated:

Using several handsets

Making internal calls
Internal calls are free calls to other handsets that are registered to the same base station.
To make a call to other handsets, press

Set the wake-up time OK

When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon l will appear on the screen and the wake-up time will be displayed instead of the date.

Setting the wake-up time

~ (1.4, enter internal number of the handset), the handset is called or INT star key P, all handsets are called.

MENU OK

Alarm Clock OK Wake-up time
Enter the wake-up time in hours and minutes, then press OK.

Phone settings

For details on how to set audio settings, see Menu page 13. tree For details on how to set the system PIN on the base page 14. station, see the Menu tree
Operating the base station on the PABX
The following settings are only necessary if your PABX requires them, see the user guide for your PABX. When entering the digits, enter them slowly one after the other.
Changing the display language
MENU Settings OK Handset OK Language OK select the language
The current language is indicated by .

Changing the dialling mode MENU 4 I O The number for the set dial-
If you accidentally choose a language you do not understand:
ling mode flashes: 0 = touch tone dialling (DTMF); 1 = dial enter number OK. pulsing (DP)
Select the correct language with u and press OK.
1 (press the keys one after the other)
recall flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; 7 = 800 ms enter number OK.
Setting recall MENU 4 I O The number for the current

Resetting the handset

You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's registration to the base station will be retained.
MENU Settings Reset Handset
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key c and sending the phone number.
MENU 4IO1O The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec. enter number OK.

Cancel the reset with a.

OK Handset OK OK
Restoring the base station to the factory settings
When restoring factory settings: All handsets are de-registered Individual settings are reset All lists are deleted The system PIN is reset to the original code 0000 Only the date and time are retained. Software reset
MENU Settings OK Base Reset OK
pause length flashes: 1 = 800 ms; 2 = 1600 ms; enter number OK. 3 = 3200 ms
Changing the pause after the recall key MENU 4 I O The number for the current

Base OK

Hardware reset Disconnect the power cord from the base station. page 1) Hold down the registration/paging key ( on the base station while reconnecting the power cable to the base station. Release the key after approximately 5 seconds.

Repeater mode

With a repeater you can increase the range of your base station. You will need to activate repeater mode page 14). Repeater mode and Eco mode or Eco ( page 1) cancel each other out. mode+ (

Appendix

Entering letters/characters
Press the relevant key the number of times indicated. Briefly press the hash key # to switch from "Abc" to "123" mode, from "123" to "abc" mode and from "abc" to "Abc" mode. Standard characters I L M N O Q

1x 2x 1) 1 a b d e g h j k m n p q t u w x. , * /

Questions and answers

If you have any queries about the use of your telephone, visit our website at www.gigaset.com/customercare for 24-hour support. The table below contains a list of common problems and possible solutions. Problem Cause Solution

P # Abc

3x c f i l o r v y ? ( #

4x $ 6 s 8 z ! ) @

5x 0 < \

6x + = &

7x 8x 9x 10x11x12x13x14x >

"

1) Space

Specifications

Recommended batteries
Technology: Nickel-metal-hydride (NiMH) Size: AAA (Micro, HR03) Voltage: 1.2 V Capacity: 400800 mAh We recommend the following types of battery: GP 550/700 mAh Yuasa Phone 700/800 mAh Peacebay 550/650 mAh (Valid at the time of going to press) The handset is supplied with recommended batteries.
Nothing The handset is not Press the end call appears in the switched on. key a for approx. display. 5 seconds or place the handset in the base station. The batteries are Charge or replace the batteries. flat. No wireless The handset is out- Move the handset connection to side the range of closer to the base the base sta- the base station. station. The handset is not tion, Base flashes in the registered. Register the handset page 9. display. The base station is Check the mains not turned on. connector on the base page 3. station You cannot The phone cord Please always use the hear a ringer/ supplied has not phone cord supplied or dialling tone been used or has ensure that the from the fixed been replaced by a pin connections are line network. new cord with the correct when purchasing from a retailer: wrong jack con3-4 assignment of nections. telephone leads/EURO CTR37. You have entered Reset the system PIN to Error tone the wrong sounds after the default 0000 page 10. system PIN system PIN. All handsets are deprompt. registered. All settings PIN forgotten. are reset. All lists are deleted.

Service (Customer Care)

We offer you support that is fast and tailored to your specific needs! Our Online Support on the Internet: www.gigaset.com/customercare For more information on aftersales service, please refer to your local warranty card. In some countries repair and replace services are impossible where the products are not sold through our authorised dealers.

Base station power consumption
In standby mode Handset in base station Handset outside base station During a call approx. 1.3 W approx. 1.3 W approx. 1.5 W

General specifications

DECT standard GAP standard Range Base station power supply Environmental conditions in operation is supported is supported up to 300 m outdoors up to 50 m indoors 230 V ~/50 Hz +5C to +45C, 20% to 75% relative humidity

Menu tree

Your phone has an extensive range of features. These are offered in the form of menus. To select a function while the phone is in idle status, press MENU (open menu), use the t and v keys to scroll to the function you require and press OK to confirm. 1 Alarm Clock
Activating/deactivating the alarm clock Input format: HHMM
To return to idle status: press and hold the a key. As an alternative to selecting functions using the t and v buttons, you can also enter the digit combination that is in front of the function in the menu tree. For setting the time and date, for example:
1-1 Activation 1-2 Wake-up time

Audio Settings

5 levels + "crescendo" available 2-3-1 External Calls 2-3-2 Internal Calls 2-3-3 Alarm Clock 10 ringer melodies available for external calls 10 ringer melodies available for internal calls 10 ringer melodies available for alarm clock
2-1 Handset Volume Can be set to one of 3 levels 2-2 Ringer Volume 2-3 Ringer Melody
2-4 Advis. Tones 2-5 Battery Low
Activate/deactivate 2-5-1 Off 2-5-2 On 2-5-3 During Call Warning tone to indicate bat- never tery is almost flat: always only during a call Assign key 1 with network mailbox and enter the network mailbox number (in idle status, press and hold key 1 to dial). Netw. Mailbx: your network provider's answer machine; must be requested separately. The network mailbox list can be displayed if your network provider supports this function and if key 1 has been assigned with the network mailbox.

Voice Mail

3-1-1 Netw. Mailbx
3-1 Set Key 1 (all devices)

Settings

Enter date (DDMMYY format), then time (HHMM format) 4-2-1 Language 4-2-2 Auto Answer 4-2-3 Register HS 4-2-4 Reset Handset Set the display language

4-1 Date/Time 4-2 Handset

page 10 page 9

Automatically activate/deactivate auto answer Manually register the handset Reset the handset

page 7

page 10
4-3 Base 4-3-2 Call list type 4-3-2-1 Missed Calls 4-3-2-2 All Calls 4-3-3 System PIN 4-3-4 Base Reset 4-3-5 Additional

page 8 page 8

activate/deactivate
Change system PIN (default is 0000) Restore factory settings 4-3-5-1 Repeater
4-3-6 Listening in 4-3-7 Preselection
page 10 page 2 4-3-5-3 Eco Mode activate/deactivate page 2 Activate/deactivate the function page 9
4-3-5-2 Eco Mode+ activate/deactivate 4-3-7-1 Presel. Number Network provider dialling code, should be inserted automatically before the dialled phone number. 4-3-7-2 With Preselect 4-3-7-3 Without Presel First digits of the dialling codes, should be dialled with preselection. First digits of dialling codes, should be dialled without preselection.

Version_01-04-2010

Issued by Gigaset Communications GmbH Frankenstr. 2a D-46395 Bocholt Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. As of 1 Oct. 2011 Gigaset products bearing the trademark "Siemens" will exclusively use the trademark "Gigaset".
Gigaset Communications GmbH 2010 All rights reserved. Subject to availability. Rights of modification reserved. www.gigaset.com
This user guide is made from 100 % recycled paper.

 

Tags

VS-2480 GR-L207WV Touch 100 IS BH-200 Vega 6000 NV-VP25 R1000 BCD996T Psab8 5600- DVD-P180 KDL-32U2520 HTS7140 0 Home 4000T 794MB Foretrex 101 MG-3924W 9200SE CU-L24dbe5 SF-5100I CDX-GT20W LE32A431t2 Monopoly City S-series 3D Md 7328 SIP-300 TA-4A FC6843 Dect MGR-A7 KDL-46EX401 Audio 310 Airluba WT88 Gigaset E450 Sport R TCP50S2 Soundchart KDL-46S2000 KOR-631G VGN-SZ5xn C Coupe Siii Start Review Odelia 452 LE46A558p3F NAD S70 Focus 2007 2500CM Cable MDX-C800REC XD-355 5200-902 SH-B123L Writer CU-RE12HKE NV-VX27EG P4B533-E Sedan 2005 Roland FP-5 Iden I450 VSX-D711-S Zoom-nikkor DMR-E50EF DF-S 50 MV500I PSR27 WR850GP EID750REN EB-X6 Concert Multivac A200 LYT2115-002AM Powerline 5501 SD-207 ST250 Seiko 7T92 Duo Keypad Nikon D1 MRV-F401 BU7000 M-240R 101751 Quicktips AN400 DW12-EFM Battlestations-midway 360PX DF330D 32LT7 MS-10 Nikkor KDC-4021V DR4800 Nokia 7710 LS6125-4 M-400 Motorola W205 WN111 CCD-FX510 CDX-GT232

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101