Ba Cover HC450.qxd

30.06.2006

10:50 Uhr

Seite 1

Version: 12.02.2007

english

A 8 - M- R1 - 1 - 1 9

Issued by Siemens Home and Office Communication Devices GmbH & Co. KG Schlavenhorst 66 D-46395 Bocholt Siemens Home and Office Communication Devices GmbH & Co. KG 2007 All rights reserved. Subject to availability. Right of modification reserved. www.siemens.com/gigaset

Gigaset

User guide
Gigaset HC450 / en / A31008-M1799-R101-1-7619 / Overview.fm / 13.02.2007

Brief overview

With the Gigaset HC450, the door intercom becomes an integral component of the cordless telephone system. It supports two-way speech using any registered cordless telephone which means that the house telephone no longer has to be permanently located in the entrance area. The Gigaset HC450 door intercom is suitable for practically all single-family residences, including those that only have a bell.

Gigaset Home Control

"Gigaset Home Control" is a standard that allows you to control u household appliances u lights and blinds u alarm systems u heating and air conditioning systems and u door intercoms such as the Gigaset HC450 from a Siemens Gigaset cordless telephone. The full functionality of the HC450 door intercom (opening the door from the handset, forwarding calls to an external number and configuring the system) is available in conjunction with Gigaset cordless telephones that support "Gigaset Home Control". A list of all compatible devices can be found in the Appendix. If you operate the HC450 door intercom using a standard DECT cordless telephone (DECT = technical standard for cordless telephones) that does not support the GAP standard, only the "two-way speech" function will be available. (GAP = cordless telephones that have been developed in accordance with the GAP standard are compatible with each other. This means that handsets from one manufacturer can be operated on a base station from another manufacturer. In this case, however, operation is restricted to the telephones' basic functions.)

Main features

u Two-way speech with callers to the u u u u u
door using the cordless telephone including handsfree Intuitive operation via the handset's softkeys (open door, activate entry light) Easy configuration using the menu on the handset Forwarding to external numbers Ease of installation and registration with the Gigaset system Replacement of the old bell button with the door intercom the existing cabling is generally adequate for installation Support for existing bell and standard door openers Configuration options for the second bell key (separate door call to specific handset, activation of entry lighting, same function as first bell key)

Version 4, 16.09.2005

Brief overview In common with the HC450 door intercom, all other products certified for "Gigaset Home Control" can be easily installed without additional cables and networked with the Gigaset cordless telephone at the push of a button. "Gigaset Home Control" thus grows with your needs. All compatible devices feature the "Gigaset Home Control" logo, making them very easy to identify. You will find more detailed and up-to-date information together with sources of supply for compatible products on the Internet at the following link: www.gigaset-home-control.com

Call diversion

If call diversion is activated for the door intercom, the door call will then be diverted to the external number. The call diversion relates to the top doorbell key. The call diversion can be controlled in different ways: If the occupier is at home he/ she sets "Status: Home", which means that the internal handset will be called first. If no-one answers, the call will then be diverted. If "Status: Away" is set, the door call will immediately be forwarded to an external number.

Setting up the Gigaset HC450 door intercom system. 12
Registering with the base station. 12 Setting functions. 12
Operating the Gigaset HC450 door intercom using the handset. 17
Incoming call from the door intercom 17 Calling the door intercom from an internal user. 17 Operation with automatic call diversion. 18
Menu tree. 20 Appendix. 22
Cleaning. Questions and answers. Gigaset cordless telephones compatible with the HC450. Service (Customer Care). Authorisation. Guarantee Certificate United Kingdom. Guarantee Certificate Ireland. Technical Data. 25 26

Index. 27

Gigaset HC450 / en / A31008-M1799-R101-1-7619 / Security.fm / 13.02.2007

Safety precautions

Caution:
Read the safety precautions and the manual before use. Explain their contents to your children as well as the potential hazards associated with using the telephone.
u Only use the mains adapter supplied, as indicated on the underside of the control unit.
This adapter is only intended for use on the Gigaset HC450 and must not be connected to other devices. Make sure that the mains adapter is accessible at all times.
Do not continue to use broken plugs or plug-in power supply units with broken housings as they pose a risk of electric shock. Have these parts replaced with genuine spare parts without delay.
u The housing of the HC450 control unit and door intercom must not be opened. Unau-
thorised opening of the housing and improper repairs may endanger the user and will invalidate the warranty. can walk on or trip over them.
u The control unit is designed for indoor operation only. Lay the cables so that nobody u The control unit includes a radio module in accordance with the DECT standard. The
operation of medical appliances may be affected. Be aware of the technical conditions in your respective environment, e.g. doctor's surgery.
u The module must not be installed during a thunderstorm, nor should any cable connec-
tions be plugged in or unplugged, as to do so would expose you to the risk of electric shock. result in electric shocks or short circuits. e.g. auto paint shops.
u Do not allow fluids to penetrate the HC450 control unit and door intercom as this could u Do not use your telephone in environments with a potential explosion hazard, u If you give your Gigaset HC450 door intercom to someone else, make sure you also

give them the manual.

u Mounting, installation and startup may only be undertaken by a qualified electrician.
Please observe the respective national regulations for the installation of electrical and telecommunications systems. devices have been disconnected from the 230 V mains. Please ensure that the mains voltage is not switched on again until the installation work has been completed. EN 60950 may be connected to the control unit (actuator output).
u Installation work on the control unit must only be carried out after the current-carrying
u Only equipment supplying safety extra-low voltage (SELV) and complying with
Safety precautions All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. This crossed-out wheeled bin symbol on the product means the product is covered by the European Directive 2002/96/EC. The correct disposal and separate collection of your old appliance will help prevent potential negative consequences for the environment and human health. It is a precondition for reuse and recycling of used electrical and electronic equipment. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Not all of the functions described in this manual are available in all countries.
Gigaset HC450 / en / A31008-M1799-R101-1-7619 / Starting.fm / 13.02.2007
Installing the Gigaset HC450 door intercom system
Installation of the HC450 door intercom system does not require additional cables to be laid if a doorbell with sound effect is already present. You replace the existing doorbell key in this case. Begin by checking that you have all the components required for mounting. Please read the entire chapter on installation carefully before you commence.
Mounting the HC450 door intercom
The HC450 door intercom generally replaces the existing doorbell. It is suitable for mounting outdoors and features weatherproof protection.

Loudspeaker

Pack contents
u 1 control unit with cover u 4 plugs and mounting screws for fixing u u u u u u u u

Top key Bottom key

the control unit and door intercom 1 HC450 door intercom 1 frame for surface mounting 1 plug-in power supply unit 2 hexagon socket screws for fixing the door intercom to the frame 1 Allen key for the hexagon socket screws 2 clamping plugs for connecting the cables to the door intercom 2 doorbell key covers and nameplates 2 thermal shrinkage tubes

u u u u

location is selected, familiarise yourself with the location of the cabling beforehand. Watch out for the cabling between the bell button, the bell transformer and the bell. Lay the cables so that nobody can walk on or trip over them. Before finally mounting the control unit, check the placement of the unit with temporary cabling by performing a function test (control unit can register with the base station, stable operation possible with adequate connection quality from the handset to the HC450 door intercom). You should also refer to the mounting instructions for the HC450 door intercom (see p. 7). The control unit must not be installed in a fuse box or metal housing. The control unit must not be installed near air conditioning systems, in areas with strong sunlight or in dusty environments. The control unit must be protected from the direct influence of water and chemicals. Areas with strong magnetic fields (transformers, electric motors, highvoltage lines) must be avoided. Cables must not be connected or disconnected or the HC450 control unit installed during a thunderstorm. Watch out for electrical, water or gas lines in the wall if mounting the control unit on the wall.

Mounting

Remove the terminal cap before mounting. Apply firm pressure to the terminal cap with both thumbs and slide it in the direction of the arrow.
Connecting the HC450 control unit

Using existing cables

Disconnect the existing connection between the doorbell and the bell transformer/bell at an appropriate location, if possible near where the control unit is mounted (see next diagram on left). Connect the open ends for the bell transformer/bell with the "Actuator" terminals in the control unit (polarity is not relevant). Connect the open ends for the doorbell with the "ETS" terminals in the control unit (polarity is not relevant).
The terminal cap will then spring out of the two detent clips. Mark the distance between the two drill holes on the wall. Drill two holes for 6 mm plugs and fix the control unit using the enclosed screws and plugs. For laying the cables, a multi-core communications cable is recommended with a wire profile of 0.6 mm.

New cabling

Connect the 2-core cable of the door intercom to the terminals marked "ETS" in the control unit (see illustration below). Connect the bell transformer/bell to the "Actuator" terminals in the control unit.

The menu for changing the display language is called up automatically during startup (see p. 12).
Initiate an internal call and select the internal user "Intercom". Press the talk key. Press the display key.
Enter the 4-digit system PIN of the door intercom if the PIN has been changed from the delivery version (0000) and press OK. You are now in the menu in which you can make settings for the door intercom.
Changing the display language
You can view the display texts in different languages. The languages available include English, German, Italian, Dutch and French. Call up the menu for the settings (see p. 12): q Language OK The current setting is displayed.
Setting up the Gigaset HC450 door intercom system English a Select the desired language, for example "English" and press OK. Press and hold (return to idle status).
Setting an internal call destination and ringer tone
Call up the menu for the settings (see p. 12): q Upper Door Key OK alternatively. s Internal Dest. OK
Changing the PIN of the door intercom
The door intercom allows you to assign a custom PIN to protect its settings against unauthorised access. You can change the 4-digit PIN (delivery version 0000) to a 4-digit PIN known only to you. Call up the menu for the settings (see p. 12): q Door PIN OK ~ Enter a 4-digit PIN and press OK. The entry is saved. a Press and hold (return to idle status).
To prevent misuse, we recommend assigning a separate PIN each for the door intercom and the base station. The door can only be opened from an external telephone (see p. 19) by entering a separate PIN other than 0000 for the door intercom.
Making settings for the top doorbell key
You can set a specific internal call destination (handset) and ringer tone for the top doorbell key of the door intercom. You can also set the doorbell key to call all registered handsets.
A list is displayed. It contains the entry "Call All" and the internal names of all registered handsets. The current setting is displayed. Select an internal user (e.g. "Anna") and confirm: q Anna OK If "Call All" is set, an incoming call from the door intercom will be forwarded to all internal users. or. s Ringer Tone OK The current setting is displayed. q Select the desired ringer tone (call melody 1-10) or special "GHC melody". Save Press the display key. continue with a Press and hold (return to idle status).
If "Call All" is set and different handset types are being used, the call melodies of the individual handsets can differ.

Setting the volume of the external loudspeaker
You can set the volume of the external loudspeaker at the door intercom to nine different levels. Call up the menu for the settings (see p. 12): q Volume OK r Select the desired volume for the external loudspeaker (1-9). Save Press the display key. continue with a Press and hold (return to idle status).
The voice connection between the handset and door intercom is activated during the setting process. This allows you to check the volume of the external loudspeaker directly.
Gigaset HC450 / en / A31008-M1799-R101-1-7619 / TFE_MT.fm / 13.02.2007
Operating the Gigaset HC450 door intercom using the handset
Operation of the HC450 door intercom is largely identical for all handsets. It is described in this manual using the Gigaset S45 (high-feature handset). Some aspects of operation will differ between the standard handset and the high-feature handset.
The caller to the door can switch on the entry lighting, if set, using the bottom door key (see p. 11).
Incoming call from the door intercom
When a call comes in from the door intercom (the bell will ring), either all handsets or just a specific handset will be called depending on the setting. If a call diversion from the door intercom is set up to an external number, the call will be diverted to the set number. a Press the end call key to reject the call. or. c / d Press the talk or loudspeaker key. You are connected with the door intercom. "Intercom" appears in the display. alternatively. Op.Door Press the display key to activate the door opener. The door opener is activated. or. Light Press the display key to switch on the entry lighting. a Press the end call key.
The following features are not available for an incoming call from the door intercom: u Conducting a conversation u Calling back from a conversation with the door intercom u Toggling a caller at the door intercom u Conducting a conference call with a user at the door intercom u Diverting or forwarding an incoming call from the door intercom
Calling the door intercom from an internal user
You can call the door intercom internally and operate it even if the bell did not ring first. To do this, you must first select the internal user "Intercom" at the handset. u Open the list of internal users. q Intercom c Press the display key. q Connect to Door OK alternatively. Op.Door Press the display key to activate the door opener. The door opener is activated. or. Light Press the display key to switch on the entry lighting. or. a Press the end call key.

Select the internal user "Intercom".
Operation with automatic call diversion
Switching between "Status: Home" and "Status: Away"
If you have entered an external number for call forwarding, you can switch between "Status: Home" and "Status: Away". The call diversion only ever relates to the top doorbell key. u With "Status: Home", the defined internal user will be called when a call comes in from the door intercom. If the "Automatic Call Diversion" function is activated and the internal user does not answer the incoming call within the set time (see "Setting the internal and external call time for incoming calls from the door intercom", p. 15), the incoming call will be diverted to the defined external number. u With "Status: Away", the call coming in from the door intercom will be diverted to the defined external number. Calling the door intercom internally: u Initiate an internal call and select the internal user "Intercom". Edit Press the display key if necessary to change the mode. a Press and hold (return to idle status).
Answering a diverted call at an external telephone
When you answer the call you will hear a recorded announcement that is repeated at regular intervals. You now have the option of accepting the call or terminating the process: 1 Press the 1 key to accept the call. # Press the hash key # to end the call. The recorded announcement does not offer the option to open the door, however this option will be available to you if there is a door opener connected to your door intercom. O Press the 9 key to open the door. ~ Enter the 4-digit PIN.
It is only possible to open the door from an external telephone if a separate PIN other than 0000 has been set up beforehand for the door intercom (see p. 13).
The incoming call cannot be diverted to a further telephone if the external number is engaged when the call comes in from the door intercom or if an answering machine answers. The door intercom will not, however, be connected with the trunk line in this case.
If you enter the PIN correctly, you will hear a recorded announcement and the door will be opened. The voice connection will still be active; you can terminate it by pressing the hash key #. If you did not enter the PIN correctly, you will hear a recorded announcement: "Enter PIN". You can then either re-enter the PIN or re-establish the voice connection with the caller by pressing the star key *. To terminate the voice connection, press the hash key #. If the conversation lasts longer than the set external call duration, a recorded announcement will sound 10 seconds before the connection is due to be terminated. You can prolong the connection by pressing the 1 key.

Operating the Gigaset HC450 door intercom using the handset If the set external call duration is exceeded once more, a recorded announcement will sound again 10 seconds before the connection is due to be terminated. The connection will be automatically terminated if you do not press the 1 key with approx. 5 seconds.

Terminating the process:

# Press the hash key.
The door intercom automatically disconnects the line after the set time and thereby frees the line again.
Gigaset HC450 / en / A31008-M1799-R101-1-7619 / Menuetree.fm / 13.02.2007

Menu tree

Instead of scrolling to locate a menu function, you can select a menu function faster by opening the menu (see p. 12) and keying in the digit combination ("shortcut"). Example: N 2 for "Language English". In the Settings menu of the Gigaset HC450:
Connect to Door Diversion No. Diversion Volume (p. 17) (p. 14) (p. 14) Volume: 1. Volume: 9 5-1 Internal Dest. (p. 16)

Upper Door Key

5-1-1 5-1-2. 5-1-6
Call All INT 1. INT 6 Melody 1. Melody 10 GHC-Melody

(p. 13) (p. 12)

Ringer Tone

(p. 13)

Lower Door Key
No Function As Upper Key Second Door Call Light

Low. Key Setting *

Internal Dest.

7-1-1 7-1-2. 7-1-6

Language

8-1 8-2 8-3 8-4 8-5

Deutsch English Francais Italiano Nederlands

(p. 12)

9 Timer 9-1 Door Light impulse 1 second. 90 second impulse 1 second. 3 second no int. Ringing 10 second. 60 second 30 second. 120 second 30 second. 120 second (p. 15)

Door Bell

(p. 15)

Int. Door Call

Ext. Door Call

Ext. Call Dur.

*) This setting will only appear if the "Second Door Call" setting is activated in the "Upper Door Key" menu.
Gigaset HC450 / en / A31008-M1799-R101-1-7619 / Appendix.fm / 13.02.2007

Appendix

Cleaning
damp cloth (do not use solvent) or an antistatic cloth. Never use a dry cloth. This can cause static.

HC450 door intercom

No function, no keys lighting up No operating current.

Wipe the HC450 door intercom with a
Check the installation, check whether the connections at the terminals are in the correct connection sequence.
Door intercom working (bell working), but not signalling at the mobile phones. 1. Control unit is not registered with the base station (control unit LED flashing). Register the control unit.

Questions and answers

If you have any queries about the use of your HC450 door intercom, contact us at www.siemens.com/gigasetcustomercare 24/7. The table below contains a list of common problems and possible solutions.
2. Control unit has been registered but is dropping the connection (LED flashing). Reduce the distance between the base station and the control unit. Install a repeater if necessary. Bell not signalling at the mobile phones, even through the control unit has a connection to the base station (control unit LED lighting up continuously). 1. no int. Ringing is set. Select a value between 10 and 60 seconds.
No function No power supply.

Check the power supply.

Door opener not working no switching noise Door opener is not correctly connected or does not conform to the specifications. Check the installation. Check whether the door opener is within the supported specification. Door opener not working switching noise, but door not opening. Door opener is not within the specification or not correctly installed mechanically. Check whether the door opener is within the supported specification or check the installation of the door opener (if necessary adjust).
2. Call forwarding activated (display showing "line in use"). Select "Status: Home". 3. Handsets outside of range or switched off, specifically set handset deregistered or switched off. Bring the handsets within the base station's range, switch on or charge the handsets. Select another handset for signalling or switch over to "Signal to All Handsets".
Contact your dealer if the problem persists.
Gigaset cordless telephones compatible with the HC450

Compatible base stations

Gigaset SX440/SX445isdn Gigaset SX450/SX450isdn Gigaset E450/E455* Gigaset E450 SIM/E455 SIM* Gigaset S440/S445* Gigaset S450/S455* Gigaset S450 SIM/S455 SIM* Gigaset S450 IP* Gigaset S645 Gigaset SL440 Gigaset SL550/SL555* Gigaset SL560/SL565*

Service (Customer Care)

We offer you support that is fast and tailored to your specific needs! Our Online Support on the Internet can be reached any time from anywhere. http://www.siemens.com/gigasetcustomercare It provides you with 24/7 support for all our products. It also provides interactive troubleshooting, a list of FAQs and answers plus user guides and current software updates (if available for the product) for you to download. You will also find frequently asked questions and answers in the appendix of this user guide. Personal advice on our range of products is available on our Premium Hotline: United Kingdom You can talk to qualified technicians who will guide you expertly through product information and installation. For fast and dependable assistance with any repairs or guarantee/warranty claims, contact our Service Centres. United Kingdom Please have your proof of purchase ready when calling. Replacement or repair services are not offered in countries where our product is not sold by authorised dealers.

Compatible high-feature handsets
Gigaset E45* Gigaset S1/S1 colour Gigaset S44 Gigaset S45* Gigaset SL1/SL1 colour Gigaset SL55* Gigaset SL56* Gigaset SL74
*) These devices support the full "Gigaset Home Control" functionality and are marked with the "Gigaset Home Control" logo (not in all countries).

Authorisation

This device is intended for use within the European Economic Area and Switzerland. If used in other countries, it must first be approved nationally in the country in question. Country-specific requirements have been taken into consideration. We, Siemens Home and Office Communication Devices GmbH & Co. KG, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/ EC. A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address: http://www.siemens.com/gigasetdocs.
Guarantee Certificate United Kingdom
Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturer's Guarantee under the conditions set out below: u In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In respect of parts subject to wear and tear (including but not limited to, batteries, keypads, casing), this warranty shall be valid for six months from the date of purchase. u This Guarantee shall be invalid if the device defect is attributable to improper treatment and/or failure to 24
comply with information contained in the user guides. u This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves (e. g. installation, configuration, software downloads). User guides and any software supplied on a separate data medium shall be excluded from the Guarantee. u The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident. u Ownership of devices or components replaced by and returned to Siemens shall vest in Siemens. u This Guarantee shall apply to new devices purchased in the European Union. For Products sold in the United Kingdom the Guarantee is issued by: Siemens Home and Office Communication Devices GmbH & Co. KG, Schlavenhorst 66, D-46395 Bocholt, Germany. u Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a Customers Statutory Rights, nor the manufacturer's liability for death or personal injury resulting from its negligence. u The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee. u Insofar as no Guarantee default exists, Siemens reserves the right to charge the customer for replacement or repair. u The above provisions does not imply a change in the burden of proof to the detriment of the customer. To invoke this Guarantee, please contact the Siemens telephone service. The relevant number is to be found in the accompanying user guide.

Guarantee Certificate Ireland
Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturers Guarantee under the conditions set out below: u In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In respect of parts subject to wear and tear (including but not limited to, batteries, keypads, casing), this warranty shall be valid for six months from the date of purchase. u This Guarantee shall be invalid if the device defect is attributable to improper care or use and/or failure to comply with information contained in the user manuals. In particular claims under the Guarantee cannot be made if: u The device is opened (this is classed as third party intervention) u Repairs or other work done by persons not authorised by Siemens. u Components on the printed circuit board are manipulated u The software is manipulated u Defects or damage caused by dropping, breaking, lightning or ingress of moisture. This also applies if defects or damage was caused by mechanical, chemical, radio interference or thermal factors (e.g.: microwave, sauna etc.) u Devices fitted with accessories not authorised by Siemens Version 4, 16.09.2005
extend to services performed by the authorised dealer or the customer themselves (e.g. installation, configuration, software downloads). User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee. u The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident. u Ownership of devices or components replaced by and returned to Siemens shall vest in Siemens. u This Guarantee shall apply to new devices purchased in the European Union. For Products sold in the Republic of Ireland the Guarantee is issued by Siemens Home and Office Communication Devices GmbH & Co. KG, Schlavenhorst 66, D-46395 Bocholt, Germany. u Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a Customers Statutory Rights, nor the manufacturers liability for death or personal injury resulting from its negligence. u The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee. u Insofar as no Guarantee default exists, Siemens reserves the right to charge the customer for replacement or repair. u The above provisions does not imply a change in the burden of proof to the detriment of the customer. To invoke this Guarantee, please contact the Siemens helpdesk on 277. This number is also to be found in the accompanying user guide.

u This Guarantee shall not apply to or

Technical Data

HC450 control unit
RF standard Range Number of channels Radio frequency range Duplex procedure Channel spacing Bit rate Modulation Voice coding Transmit power Operating temperature Storage temperature DECT Up to 300 m outdoors, Up to 50 m indoors 60 duplex channels MHz Time multiplex, 10 ms frame length 1728 kHz 1152 kbps GFSK 32 kbps 10 mW (average power per channel) 0 C to +40 C -25 C to +70 C
Operating temperature -20 C to +55 C
Storage tempera- -25 C to +70 C ture Transport temperature Dimensions -25 C to +55 C Door station cover: 215 x 98 x 30 mm (LxWxD) Frame for surface mounting: 210 x 93 mm (LxW) 360g IPV AC, 1 A
Weight Moisture protection Output voltage door opener Colour LED colour of the keys

Silver Yellow

Mains adapter
Operating voltage Nominal power Output voltages Cable length 230 V +/- 10%/50 Hz max. 17 VA 12 V AC, 1 A 24 V AC, 0.2 A 1.5 m
Dimensions 185 x 150 x 30 mm of the housing for (LxWxD) surface mounting Weight Protection class to DIN 1.1 kg with mains adapter IP40
Loading capacity of Actuator: the switching con- max. 30 V, 1 A (30 VA) tacts/relays Light: 230 V, max. 5 A Maximum conduc- 15 m tor length between control unit and door intercom Colour Grey

System

Power consumption In idle state: approx. 4.5 W During operation: approx. 7 W
Gigaset HC450 / en / A31008-M1799-R101-1-7619 / HC450SIX.fm / 13.02.2007
Actuator. 10 Authorisation. 24
Base station. 12 Bell. 3, 7, 9, 10, 15 Bell transformer. 9, 10 Bottom doorbell key. 13
Call diversion. 2, 14, 17, 18 activating/deactivating. 14 diversion destination. 14 operating the door intercom. 18 setting up to an external number. 14 status. 18 Call time. 15 Calling the door intercom from an internal user. 17 CE symbol. 23 Changing the display language. 12 Changing the PIN. 13 Clamping plug. 8 Cleaning. 22 Compatible Gigaset cordless telephones. 23 Connecting entry lighting. 11 Control unit. 7, 12 connecting. 10 connecting entry lighting. 11 LED. 12 light. 11 mounting. 9 radio range. 9 terminal cap. 9 Customer Care. 23
calling internally. 17 changing the display language. 12 changing the PIN. 13 clamping plug. 8 diversion destination. 14 duration of the bell. 15 external call duration. 15 for automatic call diversion, using. 18 incoming call from the door intercom. 17 labelling nameplates. 9 mounting. 7 operating using the handset. 17 range of applications. 2 registering with the base station. 12 second door call. 13 setting the call time. 15 setting up a call diversion to an external number. 14 supplied items. 7 surface mounting. 8 system PIN. 12 top doorbell key. 13 volume of the external loudspeaker. 16 Door light. 15 Door opener. 3 Door opener voltage. 3 Doorbell. 7 Doorbell key. 2, 9, 13 Duration of the bell. 15 Duration of the door light. 15