BA Cover S45.qxd

21.06.2005

17:55 Uhr

Seite 1
Siemens Aktiengesellschaft, issued by Siemens Communications Haidenauplatz 1 D-81667 Munich Siemens AG 2005 All rights reserved. Subject to availability. Rights of modification reserved. Siemens Aktiengesellschaft www.siemens.com/gigaset

Gigaset S45

cyan magenta yellow black
Liebreich Medienproduktion
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / OVERVIEW.fm / 02.09.2005 Handset at a glance

Handset at a glance

10.05.05 INT 09:45 SMS
1 Display in idle status 2 Charge status of the batteries = e V U (flat to full) = flashes: batteries almost flat e V U flashes: batteries charging 3 Display keys (page 9) 4 Message key Access to calls and message lists (depending on the base station) Flashes: new message or new call. 5 End call key, On/Off key End call, cancel function, go back one menu level (press briefly), back to idle status (press and hold), activate/deactivate handset (press and hold in idle status) 6 Hash key Key lock on/off (press and hold in idle status), Toggle between upper/lower case and digits 7 Call-by-call list key Open call-by-call list 8 Connection socket for headset 9 Microphone 10 Recall key - Confer (Flash) - Insert a dialling pause (press and hold) 11 Star key Ringtones on/off (press and hold), Open table of special characters 12 Key 1 Select answering machine/network mailbox (press and hold) 13 Talk key Answer a call, open last number redial list (press briefly), start dialling (press and hold) 14 Handsfree key Switch between earpiece and handsfree mode Lights up: handsfree activated Flashes: incoming call 15 Control key (page 8) 16 Signal strength i (high to low) | flashes: no reception
Illustration of a handset on a base station with SMS functionality.
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / S45_IVZ.fm / 02.09.2005 Contents

Contents

Handset at a glance. 1 Safety precautions. 3 Gigaset S45 a handset with many extras 4 First Steps 4
Pack contents. 4 Setting up the handset for use. 4

Appendix. 18

Care. Contact with liquid. Questions and answers. Customer service (Customer Care). Specifications. Guarantee Certificate United Kingdom. Guarantee Certificate Ireland. 21

Making calls. 7

Making an external call. Ending a call. Answering a call. Handsfree operation. Muting. Making internal calls. 8 8
Notes on the operating instructions. 22
Symbols used. Example: menu input. Example: multiple line input. Writing and editing a text message. 23 23
Accessories. 25 Index. 26

Operating the handset. 8

Switching the handset on/off. 8 Activating/deactivating the keypad lock 8 Control key. 8 Display keys. 9 Returning to idle status. 9 Menu guidance. 9 Correcting incorrect entries. 10
Using the directory and lists. 10
Directory and call-by-call list. 10 Last number redial list. 12 Opening lists with the message key. 12

Not all of the functions described in this manual are available in all countries.
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 02.09.2005 Gigaset S45 a handset with many extras
Gigaset S45 a handset with many extras
Your Gigaset S45 not only lets you store up to 150 telephone numbers (page 10) your Gigaset S45 can do much, much more: u You can designate important people as VIPs so you can tell important calls from the "tone" (page 10). u You can store anniversaries (page 11) in your phone and it will remind you of them in advance. u Select frequently used phone numbers at the press of a single key (page 11). Have fun using your new Gigaset S45!

Inserting the batteries

Only use the rechargeable batteries recommended by Siemens (page 19)! This means: Never use conventional batteries (nonrechargeable) as this may cause significant damage to health and property. For example, the outer casing of the batteries could be destroyed or the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type.
Fit the batteries with the correct polarity (see diagram). The polarity is indicated in/on the battery compartment.

First Steps

Pack contents
u one Gigaset S45 handset, u one charging cradle (incl. mains u u u u
adapter), two batteries, one battery cover, one belt clip, one user guide.
Closing the battery cover
First align the battery cover with the
Setting up the handset for use
Connecting up the charging cradle and mounting it on the wall (if required) is described at the end of these instructions.
notches on the lugs on the inside of the housing. Then press the cover closed so that it clicks into place.
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 02.09.2005 First Steps

Attaching the belt clip

There are notches for attaching the belt clip on the side of the handset at the same height as the display. Press the belt clip onto the back of the handset so that the lugs on the belt clip click into the notches.
Automatic registration Gigaset S45 to Gigaset S450/S455
Important: The handset must not already be registered to any base station. Registering the handset to the Gigaset S450 base station occurs automatically. Place the handset in the base with its display facing forward. Registration takes around 1 minute. During this process, Regstr.Procedure appears in the display and the name of the base station flashes e.g. Base 1. When the handset has registered, its screen displays its internal number, e.g. INT 2 for internal number 2. The handset is assigned the lowest available internal number (1-6). If all internal numbers 1-6 have been assigned, number 6 is overwritten, provided the handset with the internal number 6 is in idle status.

Opening the battery cover
If fitted, remove the belt clip. Slide your finger nail or a screw driver
down the notch to separate the belt clip from the cover. Push the entire cover upwards so that it unclicks.

Notes:

Automatic registration is not possible when the base station on which you wish to register the handset is being used to make a call. Each key press interrupts the automatic registration. If automatic registration does not work, you will have to register the handset manually.
Manual registration Gigaset S45
If the handset does not switch on automatically when the batteries are fitted, you must first charge the batteries. You must activate manual registration of the handset at both the handset and the base station. After it has registered, the handset returns to idle status. The handset's internal number is shown in the display e.g. INT 1. If not, repeat the procedure.

Registering your phone

Before you can use your Gigaset S45 you must register it to a base station. It can be registered to a maximum of four base stations. The actual registration procedure will depend on the type of base station.
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 02.09.2005 First Steps v Handset Register H/Set s Select base station, e.g. Base 1, and press OK. ~ Enter the system PIN of the base station (the default is 0000) and press OK. The screen will display, e.g. Base 1.

1. On the handset

The handset should only be placed in a base station or charging cradle that is designed for it. When the handset is in the cradle, it charges even if it is switched off. If the handset has switched itself off because the batteries are flat and it is then placed in the charging cradle, it will switch itself on automatically. After the first battery charge and discharge you may replace your handset in the charging cradle after every call.

2. On the base station

Within 60 secs. press and hold the registration/paging key on the base station (page 1) (approx. 3 secs.).

Headset socket

You can connect the following types of headset (with jack connector): HAMA Plantronics M40, MX100 and MX150.

Please remember:

u Always repeat the charging and dis-

Charging batteries

Plug the mains adapter of the charging
display facing forward. To charge the batteries, leave the handset in the charging cradle. If the handset is activated, the flashing battery icon e in the top right of the display indicates that the batteries are charging. During handset operation, the battery icon indicates the charge status of the batteries (page 1).
Place the handset in the cradle with its

Dialling using the directory, call-by-call list (page 1, page 10) or last number redial list (page 12) saves time re-entering numbers and network provider access codes ("callby-call numbers").
Switching between earpiece and handsfree mode
d Press the handsfree key. During a call and when listening to the answering machine (depending on the base station), switch handsfree on or off. If you wish to place the handset in the charging cradle during a call: Press and hold the handsfree key d while placing the handset in the base station. If handsfree key d does not light up, press the key again. For how to adjust the volume, see page 15.

Ending a call

a Press the end call key.

Answering a call

The handset indicates an incoming call in three ways: by ringing, by a display on the screen and by the flashing handsfree key d.
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 02.09.2005 Operating the handset

Muting

You can deactivate the microphone in your handset during an external call. The other party hears a wait melody. u Press the control key on the left to mute the handset. Press the display key to reactivate the microphone.
Activating/deactivating the keypad lock
# Press and hold the hash key. You will hear the confirmation beep. The icon appears in the display when the keypad lock is activated. The keypad lock is deactivated automatically if someone calls you. It is re-activated when the call is finished.

Making internal calls

Internal calls to other handsets registered on the same base station are free.

Control key

Calling a specific handset
u ~ Or: u s c u * Initiate internal call. Enter the number of the handset. Initiate internal call. Select handset. Press the talk key. Initiate internal call. Press the star key. All handsets are called. Press the end call key.
Calling all handsets ("group call")
In the following information the side of the control key (top, bottom, right, left) you have to press in each operating situation is shown in black (e.g. v for "press the right of the control key"). The control key has a number of different functions:
When the handset is in idle status
s v u t Open the directory. Open main menu. Open list of handsets. Set the ringtones on the handset (page 15).

Operating the handset

Switching the handset on/off
a Press and hold the end call key. You will hear the confirmation beep.
In the main menu and in input fields
You can use the control key to move the cursor up t, down s, right v or left u.

In lists and submenus

t/s v u Scroll up/down line by line. Open submenu or confirm selection. Go back one menu level, or cancel.

During an external call

s u t Open the directory. Initiate an internal consultation call. Adjust loudspeaker volume for earpiece and handsfree mode.

Returning to idle status

You can revert to idle status from anywhere in the menu as follows: Press and hold the end call key a. Or: Do not press any key: after 2 minutes the display will automatically revert to idle status. Changes that you have not confirmed or saved by pressing OK, Yes, Save, Send or Save Entry OK will be lost. An example of the display in idle status is shown on page 1.

Display keys

The function of the display keys changes depending on the particular operating situation. Example:

Menu guidance

Your telephone's functions are accessed using a menu that has a number of levels.
Main menu (first menu level)
1 Current display key functions are shown in the bottom display line. 2 Display keys
Press v with the handset in idle status
Press the display key below to launch the function. The most important display symbols are: Menu Open the main menu. Options Open a context-dependent menu. W Delete key: backspace deletes one character at a time. Go back one menu level or cancel operation. Copy number into directory. On bases with built-in answering machines: forward external call to answering machine. Open the last number redial list (depending on the base station).
to open the main menu. The main menu functions are shown in the display as a list with icon and name. Accessing a function, i.e. opening the corresponding submenu (next menu level): Navigate to the function using the control key q. Press the display key OK.

Submenus

The functions in the submenus are displayed as lists. To access a function: Scroll to the function with the control key q and press OK. Or: Enter the corresponding digit combination. A short press on the end call key a returns you to the previous menu level / cancels the operation.
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 02.09.2005 Using the directory and lists
Correcting incorrect entries
You can correct wrong characters in the text by navigating to the wrong input using the control key. You can then: u press X to delete the character to the left of the cursor, u insert characters to the left of the cursor, u overwrite the character (flashing) when entering the time and date etc.

u You will find examples of symbols
Storing a number in the directory
used, menu entries and multiple line input in the appendix to this user guide, page 22.
s New Entry Change multiple line input: Number : Enter number. Name : Enter name. Annivers.: Enter anniversary if required (page 11). Shortcut: Select key for quick dial. Save changes.
Storing a number in the call-by-call list
C New Entry Change multiple line input: Number : Enter number. Name : Enter name.
Using the directory and lists
You can store a maximum of 150 entries in the directory and call-by-call list (the actual number depends on the size of the individual entries). You create the directory and call-by-call list for your own individual handset. You can, however, send lists/entries to other handsets or the base station (page 11).
Selecting entries in the directory and call-by-call list
s / C Open directory or call-by-call list. You have the following options: u Use s to scroll through the entries until the required name is selected. u Enter the first character of the name, or scroll to the entry with s if required.
Directory and call-by-call list
In the directory, you can store numbers and the associated names. With the handset in idle status, open the directory by pressing the s key. The call-by-call list is used to store the access codes for network providers (so-called "call-by-call numbers"). Open the call-by-call list in idle status by pressing the C key.

Length of entries

Number: Name: max. 32 digits max. 16 characters
s / C s (select entry) c Press the talk key. The number is dialled.
Dialling with the directory/call-by-call list
For quick access to a number from the directory or the call-by-call list (quick dial), you can assign the number to a key.
Managing entries in the directory/ call-by-call lists

Using quick dial keys

s (select entry)
Press and hold the required quick dial
Sending the directory/call-by-call list to another handset

Requirements:

must both be registered to the same base station. u The other handset and base station can send and receive directory entries. Please read the relevant user guide for further information. s / C s (select entry) Options (open menu) Copy Entry / Copy List ~ Enter the internal number of the receiving handset. You see Copying entry. Yes / No Press the display key. A successful transfer is confirmed by a message and confirmation tone on the receiving handset.
u The sending and receiving handsets

Viewing an entry

Press the display key. The entry is displayed. Back with OK.

Editing entries

View Edit
Press display keys one after the other. Carry out changes and save.

Opening lists with the message key
An advisory tone sounds as soon as a new entry appears on a list. The f key flashes (it goes off when the key is pressed). In idle status, the displays shows an icon for the new message. If you press the f key, you access the lists which contain new messages.

Edit Delete Save

Reminder call on an anniversary
A reminder call is signalled on the handset using the selected ringtone. Silence Press the display key to stop the reminder call.

Last number redial list

The last number redial list contains the ten numbers last dialled with the handset (max. 32 numbers). If one of the numbers is in the directory, then the corresponding name will be displayed.
Using a handset as a room monitor
If the room monitor is activated, a previously stored destination number is called as soon as a set noise level is reached. You can store an internal or external number in your handset as the destination number. The room monitor call to an external number stops after approx. 90 seconds. The room monitor call to an internal number (handset) stops after approx. 3 minutes (depending on the base station). While the room monitor is activated, all keys are locked except the end call key. The handset's speaker is muted.
Manual last number redial
c s c Press the key briefly. Select entry. Press the talk key again. The number is dialled. When a name is displayed, you can display the corresponding phone number by pressing the display key View. 12
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 02.09.2005 Using a handset as a room monitor When the room monitor is activated, incoming calls to the handset are indicated without a ringtone and are only shown on the screen. The display and keypad are not illuminated and advisory tones are also turned off. If you accept an incoming call, the room monitor mode is suspended for the duration of the call, but the function remains activated. If you switch off the handset, the room monitor mode is deactivated. You must reactivate the function after switching on the handset again. set or Call All , if all registered handsets are to be called) OK. Save numbers with Save. Level: Set noise level sensitivity (Low or High). Save changes (page 23). The function is now activated. With v, you can move directly to settings.

Caution!

You should always check the operation of the room monitor before use. For example, test its sensitivity. Check the connection if you are diverting the room monitor to an outside number. When the function is switched on the handset's operating time is severely reduced. If necessary, place the handset in the charging cradle. This ensures that the batteries do not run down. Ideally the handset should be positioned 1 to 2 metres away from the baby. The microphone must be directed towards the baby. The connection to which the room monitor is diverted must not be blocked by an activated answering machine.
v Room Monitor s Scroll to the Call to: line. Edit Press the display key. X Delete existing number. Enter number as described in "Activating the room monitor and entering the number to be called" (page 13). Save changes (page 23).
Changing previously set external destination number
Activating the room monitor and entering the number to be called
v Room Monitor Change multiple line input: Room M.: Select On to activate. Call to: Press the display key Edit and enter destination number. External number: select number from the directory or enter directly. Only the last 4 digits are displayed. Internal number: delete any stored external number. INT s (select hand-
v Room Monitor s Scroll to the Call to: line. Edit Press the display key. Yes Press the display key to confirm the prompt. Enter number as described in "Activating the room monitor and entering the number to be called" (page 13). Save changes (page 23).
Changing previously set internal destination number
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 02.09.2005 Handset settings
Deactivating the room monitor remotely
Requirements: The phone must support touch tone dialling and the room monitor is set for an external destination number. Take the call from the room monitor and press keys 9 ;. The room monitor function will deactivate after the call ends. There will be no further room monitor calls. The other room monitor settings on the handset (e.g. no ringtone) will however remain activated until you press the display key Off on the handset. To reactivate the room function with the same phone number: Turn on the activation again and save with Save (page 13).

Setting the display

You have a choice of four colour schemes and several different contrasts. v Display Colour Scheme Select and press OK. s Select a colour scheme and press OK ( = current colour). a Press briefly. Contrast Select and press OK. r Select contrast. Save Press the display key. a Press and hold (idle status).
Setting the screen picture
You can display a screen picture (picture or digital clock) when the handset is in idle status. This will replace the idle status display. It may conceal the date, time and name. The screen picture is not displayed in certain situations, e.g. during a call or when the handset has been deregistered. If a screen picture has been activated, the menu item Screen Picture is marked with . v Display Screen Picture The current setting is displayed. Change multiple line input: Activation: Select On (screen picture is displayed) or Off (no screen picture). Selection: Change screen picture if necessary (see below). Save changes (page 23). If the screen picture conceals the display, press the end call key briefly to show the idle display with time and date.

Handset settings

Changing the display language
You can view the display texts in different languages. v Handset Language The current language is indicated by . s Select a language and press OK. a Press and hold (idle status). If you accidentally choose a language you do not understand: v Press keys one after the other. s Select the correct language and press OK.
v Display Screen Picture s Scroll to the Selection line. View Press the display key. The active screen picture is displayed s Select Picture/Clock. Save Press the display key. Save changes.
Changing the screen picture
Adjusting the loudspeaker volume
You can set the loudspeaker volume for handsfree talking to five different levels and the earpiece volume to three different levels. You can only make these adjustments during a call. The handsfree volume can only be adjusted when this function is set. You are conducting an external call. t Open menu. r Select volume. Save Press display key if necessary to save the setting permanently. If t is assigned a different function: Options Open menu. Volume Select and press OK. Configure setting (see above).
Setting display illumination
Depending on whether or not the handset is in the charging cradle you can set different levels of display illumination. If the charging cradle is switched on, the display is permanently dimmed. v Display Lighting The current setting is displayed. Change multiple line input: In Charger Select On or Off. Outside Charger Select On or Off. Save Press the display key. a Press and hold (idle status).

Changing ringtones

u Volume:
Activating/deactivating auto answer
If you have activated this function, when you get a call you can simply lift the handset out of the charging cradle without having to press the talk key c. v Handset Auto Answer Select and press OK ( = on). a Press and hold (idle status).
You can choose between five volumes (15; e.g. volume 2 = ) and the "Crescendo" ring (6; volume increases with each ring = ). u Ringtones: You can choose between 15 different melodies. You can configure the following functions with different ringtones: u Ext. Calls : For external calls u Internal Calls : For internal calls u All: The same for all functions

Settings for individual functions
Set the volume and melody depending on the type of signalling required. v Audio Settings Ringer Settings q Setting, e.g. select Ext. Calls and press OK. Change multiple line input: r Set volume (16). s Scroll to the next line. r Select melody. Save Press the display key to save the setting. In idle status, you can also open the menu Ringer Settings by pressing t briefly.
Deactivating the ringtone for the current call

Silence

Press the display key.
Activating/deactivating the alert tone
In place of the ringer tone you can activate an alert tone. When you get a call, you will hear a short tone ("Beep") instead of the ringtone. * Press and hold the star key and within 3 seconds: Beep Press the display key. A call is now signalled by one brief alert tone. You will now see in the display.
v Audio Settings Ringer Settings All Set volume and ringtone (see "Settings for individual functions"). Yes Press the display key to confirm the prompt. a Press and hold (idle status).
Settings for all functions to ring the same
Activating/deactivating advisory tones
Your handset uses advisory tones to tell you about different activities and statuses. The following advisory tones can be activated and deactivated independently of each other: u Key beep: Each key press is acknowledged. u Acknowledge tones: Confirmation tone (rising tone sequence): at the end of the entry/ setting and when an SMS or a new entry arrives in the answering machine list (depending on base) or the calls list Error beep (descending tone sequence): when you make an incorrect entry Menu end tone: when scrolling at the end of a menu u Battery tone: the batteries need to be charged. v Audio Settings Advisory Tones Change multiple line input: Key Tones: Select On or Off.
Activating/deactivating the ringtone
Before answering a call or while your handset is in idle status, it is possible for you to cancel the ringtone permanently or for the current call. The ringtone cannot be re-activated while an external call is in progress.
Deactivating the ringtone permanently
* Press the star key and hold until you can no longer hear the ringtone. The icon appears in the display.
Re-activating the ringtone
* Press and hold the star key.
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 02.09.2005 Handset settings Confirm.: Select On or Off. Battery: Select On, Off or In Call. The battery tone is activated/deactivated or only sounds during a call. Save changes (page 23). You cannot deactivate the confirmation tone for placing the handset in the charging cradle.

Recommended batteries
(Valid at the time of going to press)
Please have your receipt ready when calling. Replacement or repair services are not offered in countries where our product is not sold by authorised dealers.
Nickel-metal-hydride (NiMH): u Sanyo Twicell 650 u Sanyo Twicell 700 u Panasonic 700mAh "for DECT" u GP 700mAh u Yuasa Technology AAA Phone 700 u Varta Phone Power AAA 700mAh u GP 850 mAh u Sanyo NiMH 800 u Yuasa Technologies AAA 800 The handset is supplied with recommended batteries.
Handset operating times/charging times
Capacity Standby time Calling time Charging time 650 mAh approx. 170 hours (7 days) approx. 13 hours approx. 6 hours
The operating and charging times apply only when using the recommended batteries.

General specifications

Handset dimensions 144 x 52 x 29 mm (L W H)
Weight of handset 128 g with batteries
Guarantee Certificate United Kingdom
Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturer's Guarantee under the conditions set out below: u In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In respect of parts subject to wear and tear (including but not limited to, batteries, keypads, casing), this warranty shall be valid for six months from the date of purchase. u This Guarantee shall be invalid if the device defect is attributable to improper treatment and/or failure to comply with information contained in the user manuals. u This Guarantee shall not apply to or extend to services performed by the 20
authorised dealer or the customer themselves (e. g. installation, configuration, software downloads). User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee. u The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident. u Ownership of devices or components replaced by and returned to Siemens shall vest in Siemens. u This Guarantee shall apply to new devices purchased in the European Union. For Products sold in the United Kingdom the Guarantee is issued by: Siemens plc, Information & Communication Mobile Devices. Siemens House, Oldbury, Bracknell, RG12 8FZ. u Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a Customers Statutory Rights, nor the manufacturer's liability for death or personal injury resulting from its negligence. u The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee. u Insofar as no Guarantee default exists, Siemens reserves the right to charge the customer for replacement or repair. u The above provisions does not imply a change in the burden of proof to the detriment of the customer. To invoke this Guarantee, please contact the Siemens telephone service. The relevant number is to be found in the accompanying user guide.

Hello Peter, I cannot come today. Ic
Order of directory entries
The directory entries are usually sorted in alphabetical order. Spaces and digits take first priority. The sort order is as follows: 1. Space 2. Digits (09) 3. Letters (alphabetical) 4. Other characters To get round the alphabetical order of the entries, insert a space or a digit in front of the name. These entries will then move to the beginning of the directory. Names which you have preceded with an asterisk will move to the end of the directory.

Options

EATONI is activated Upper/lower case or digits SMS text Selection line
If this letter is the one you want, confirm it by pressing the next key. If it is not the one you want, briefly press the hash key # repeatedly until the required letter is reverse-highlighted on the display line and copied into the text panel. If you press and hold the hash key # you switch from "Abc" mode to "123" and from "123" to "abc" and from "abc" to "Abc".
Deactivating/activating predictive text
Requirement: You are writing a text message. Options Press the display key. Predictive Text Select and press OK ( = on). a Press the end call key briefly to return to the text panel. Enter the text. 24
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / accessories_SAG.fm / 02.09.2005 Accessories

Accessories

All accessories and batteries are available from your mobile phone retailer. Or you can order direct online via the online Shop: www.siemens.com/shop. The Online Shop also has the latest product information. Only use original accessories. This will avoid possible health risks and damage, and also ensure that all the relevant regulations are complied with.
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / S45_SIX.fm / 02.09.2005 Index
Accessories. 25 Acknowledge tones. 16 Activating advisory tones. 16 call acceptance. 15 handset. 8 keypad lock. 8 room monitor. 13 Adjusting loud speaker volume. 15 Advisory tones. 16 Alarm clock setting. 17 Alert tone. 16 Anniversary. 11 Answering a call. 7 Auto answer. 7, 15

Care, phone.18 Changing destination number.13 display language.14 ringtone.15 Character set, see Special characters.23 Charge status display.1, 6 Confirmation beep.16 Control key.1, 8 Correcting incorrect input.10 Customer service.19
Deactivating handset. 8 keypad lock. 8 Default settings handset.17, 18 Delete key. 9 Deleting characters.10 Dialling pause entering. 1 Digital clock.14 Directory.10 managing entries.11 opening.8, 9 order of entries.24 saving anniversary.11 saving entry.10 sending entry/list to handset.11 Display changing display language.14 colour skin/contrast.14 display keys.1, 9 illumination.15 in idle status. 9 memory.11 screen picture.14 setting.14 wrong language.14
Base station changing. 7 Battery charging. 1 display. 1 fitting. 4 icon. 1 recommended batteries. 19 symbol. 1 Battery icon. 6 Battery pack charging. 6 Battery tone. 16 Best base station. 7
Call ending. 7 external. 7 internal. 8 Call acceptance. 15 Call duration. 7 Call-by-call list. 10 key. 1 Call-by-Call numbers. 10 Calls list. 12 Cancelling (operation). 9 26
Earpiece mode. 7 Earpiece volume.15 EATONI (predictive text).24 End call key.1, 7 Ending a call. 7 Entering special characters.23 Error beep.16
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / S45_SIX.fm / 02.09.2005 Index Example menu input. 22 multiple line entry. 23
Key 1 (fast access). 1 Key click.16 Keypad lock. 8 Keys assigning directory entry.10 call-by-call key. 1 cancel key. 9 control key.1, 8 delete key. 9 display keys.1, 9 end call key.1, 7 fast access. 1 handsfree key. 1 hash key.1, 8 menu key. 9 message key. 1 On/Off key. 1 quick dial.10 recall key. 1 star key.1, 16 talk key.1, 7
Fast access assigning key 1. 1
Group call. 8 Guarantee Certificate. 20
Handset activating/deactivating. 8 advisory tones. 16 changing to best reception. 7 changing to different base station. 7 contact with liquid. 18 display illumination. 15 display language. 14 idle status. 9 list. 8, 9 loudspeaker volume. 15 muting. 8 operating and charging times. 20 registering. 5 registering on another base station. 7 restoring default settings. 17 screen picture. 14 using room monitor. 12 Handset charging times. 20 Handset operating time. 20 in room monitor mode. 13 Handsfree key. 1 Handsfree talking. 7 Hash key. 1, 8 Headset socket. 6 Hearing aids. 3
Language, display.14 Last number redial list.12 Last number redial, manual.12 Liquid.18 List call-by-call list.10 handsets.8, 9 last number redial list.12 Lock activating/deactivating keypad lock. 8 Loudspeaker volume.15