Base station power reduction Switched-mode versus conventional power supply
3.0 Power consumption in W
Handset in base station, trickle charge
Base station during calls

unverdichtet verdichtet

Issued by Gigaset Communications GmbH Schlavenhorst 66, D-46395 Bocholt Gigaset Communications GmbH is a trademark licensee of Siemens AG
Gigaset Communications GmbH 2008 All rights reserved. Subject to availability. Rights of modifications reserved. www.gigaset.com
Ven zkaznci, spolenost Gigaset Communications GmbH je prvnm nstupcem spolenosti Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), kter dle pejala segment produkt Gigaset spolenosti Siemens AG. Jakkoli prohlen spolenosti Siemens AG nebo SHC, kter naleznete v uivatelskch prukch, je teba povaovat za prohlen spolenosti Gigaset Communications GmbH. Doufme, e jste s produkty Gigaset spokojeni. Ven zkaznk, Spolonos Gigaset Communications GmbH je prvnym nstupcom spolonosti Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), ktor zasa pokraovala v innosti divzie Gigaset spolonosti Siemens AG. Z tohto dvodu je potrebn vetky vyhlsenia spolonosti Siemens AG alebo SHC, ktor sa nachdzaj v pouvateskch prrukch, chpa ako vyhlsenia spolonosti Gigaset Communications GmbH. Verme, e budete so zariadenm Gigaset spokojn. Stimate client, Gigaset Communications GmbH este succesorul legal al companiei Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), care, la rndul su, a continuat activitatea companiei Gigaset a Siemens AG. Orice afirmaii efectuate de Siemens AG sau SHC i incluse n ghidurile de utilizare vor fi, prin urmare, considerate a aparine Gigaset Communications GmbH. Sperm ca produsele Gigaset s fie la nlimea dorinelor dvs. Potovani potroau, Gigaset Communications GmbH je pravni naslednik kompanije Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), kroz koju je nastavljeno poslovanje kompanije Gigaset kao dela Siemens AG. Stoga sve izjave od strane Siemens AG ili SHC koje se mogu nai u korisnikim uputstvima treba tumaiti kao izjave kompanije Gigaset Communications GmbH. Nadamo se da ete uivati u korienju svog Gigaset ureaja. , Gigaset Communications GmbH Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), Siemens AG. , Siemens AG SHC, , Gigaset Communications GmbH. Gigaset. Tisztelt Vsrl! A Siemens Home and Communication Devices GmbH & Co. KG (SHC) trvnyes jogutdja a Gigaset Communications GmbH, amely a Siemens AG Gigaset zletgnak utdja. Ebbl kvetkezen a Siemens AG vagy az SHC felhasznli kziknyveiben tallhat brmely kijelentst a Gigaset Communications GmbH kijelentsnek kell tekinteni. Remljk, megelgedssel hasznlja Gigaset kszlkt.

Your phone is now ready for use. If you have any queries about using your phone, please read the tips on troubleshooting ("Questions and Answers", page 51) or contact our customer service department (Customer Care, page 53).

Operating the handset

Activating/deactivating the handset
a In idle status, press and hold the end call key (confirmation tone).
In the main menu and in input fields
You can use the control key to move the cursor up t, down s, right v or left u.

In lists and submenus

t/ s v u Scroll up/down line by line. Open submenu or confirm selection. Go back one menu level or cancel. Open the directory. Initiate internal consultation call and mute Adjust the loudspeaker volume for earpiece and handsfree mode.
Activating/deactivating the keypad lock
# Press and hold the hash key. You will hear the confirmation tone. The icon appears in the display when the keypad lock is activated. The keypad lock is deactivated automatically if someone calls you. It is re-activated when the call is finished.

During an external call

Control key

Display keys

The function of the display keys changes depending on the particular operating situation. Example:
In the description below, the side of the control key (up, down, right, left) that you have to press in the different operating situations is marked in black, e.g. v for "press right on the control key". The control key has a number of different functions:
1 Current display key functions are shown in the bottom display line. 2 Display keys
When the handset is in idle status
s v u t Open the directory. Open the main menu. Open the list of handsets. Call up the menu to set the call volume (page 42), ringer tones (page 42) and advisory tones (page 44) for the handset.
The most important display icons are: } Left display key, as long as it has not been assigned a function (page 39). Open the main menu. Options Open a context-dependent menu. W Delete key: deletes one character at a time from right to left.
Operating the handset Go back one menu level or cancel operation. Fetch e-mail address from the directory. Copy number into directory. Open the last number redial list.

Submenus

The functions in the submenus are displayed as lists. To access a function: Scroll to the function with the control key q and press OK. Or: Enter the corresponding digit combination (page 13). Briefly press the end call key a once to return to the previous menu level/cancel the operation.

ECO DECT reduces power consumption by using a power supply with low power consumption and also reduces the transmission power of the base station. If only one handset is registered and it is in the base station, eco mode is always activated automatically. In this case, the transmission power of the base station is reduced to the minimum. You can use your handset to reduce the transmission power on the base station manually even when the handset is not in the base station. By doing so, you will reduce the transmission power even if you have several handsets registered. Your handset also reduces the transmission power depending on the distance to the base station.
Activating/deactivating eco mode:
v Base Add. Features Eco Mode OK Press the display key ( = on).
Gigaset S670 / IM-NORD EN / A31008-M1904-R201-1-SM19 / menuetree.fm / 4.6.07

Menu tree

Instead of scrolling to locate a menu function, you can select a function more quickly by opening the menu and keying in a digit combination (or shortcut). Example: v N 2 2
for "Set ringer tone for external calls". With the telephone in idle status, press v (open main menu):
1 1-1 1-2 1-3 SMS You have activated an SMS mailbox (general or private) without a PIN New SMS Incoming 0 Outgoing 0 (page 26) (page 29) (page 27)
You have activated an SMS mailbox with a PIN or 2-3 mailboxes 1-1 Mailbox 1-1-1 1-1-2 1-1-3 1-2 to 1-4 Mailbox 1 Mailbox 2 Mailbox 3 1-2-1 to 1-4-1 1-2-2 to 1-4-2 1-2-3 to 1-4-3 1-5 1-6 SMS Service Settings (page 32) 1-6-1 1-6-2 1-6-3 1-6-4 1-6-2-6 Sel. Services All Calls 2-6-1 2-6-3 2-Ringback Off Calls List (page 18) (page 23) Call Divert Call Waiting (page 17) (page 17) Service Centres SMS Mailboxes Notify Number Notify Type Status Report (page 31) (page 30) (page 30) (page 30) (page 27) New SMS Incoming 0 Outgoing 0 New SMS (page 26) (page 29) (page 27) (page 26)

Incoming 0

(page 29)

Outgoing 0

(page 27)
4 4-3 4-4 4-7-1 7-2 7-8-1 8-2 Add. Features Room Monitor Data Transfer Missed Alarms Alarm Clock Calendar Resource Dir. Screensavers Caller Pictures Sounds Settings Date/Time Audio Settings (page 9) 8-2-1 8-2-2 8-2-3 8-3 Display 8-3-1 8-3-2 8-3-3 8-3-4 8-4 Handset 8-4-1 8-4-2 8-4-3 8-4-4 8-4-5 8-4-6 8-5 Base 8-5-2 8-5-3 8-5-4 8-5-5 8-5-6 8-5-7 8-6 Voice Mail 8-6-1 Handset Volume Ringer Settings Advisory Tones Screen Saver Colour Scheme Contrast Backlight Language Auto Answer Register H/Set Select Base Area Codes Reset Handset Music on hold System PIN Base Reset Add. Features Preselection Calls List Type Set Key 1 (page 42) (page 42) (page 44) (page 41) (page 40) (page 40) (page 41) (page 40) (page 41) (page 35) (page 36) (page 47) (page 47) (page 48) (page 47) (page 48) (page 12, page 37, page 49) (page 25) (page 23) (page 34) (page 43) (page 43) (page 43) (page 38) 4-4-3 (page 46) (page 44) (page 45) Directory (page 21)

Gigaset S670 / IM-NORD EN / A31008-M1904-R201-1-SM19 / telefony.fm / 4.6.07

Making calls

Making an external call
External calls are calls using the public telephone network. ~c Enter the number and press the talk key. Or: c~ Press and hold the talk key c and then enter the number. You can cancel the dialling operation with the end call key a. You are shown the duration of the call while the call is in progress.
If the ringer tone is intrusive, press the display key Silence. You can take the call as long as it is displayed on the screen.
Calling Line Identification
When you receive a call, the caller's number is displayed on the screen if the following conditions are met: u Your network provider supports CLIP, CLI. CLI (Calling Line Identification): the caller's number is transmitted. CLIP (Calling Line Identification Presentation): the caller's number is displayed. u You have arranged CLIP with your network provider. u The caller has arranged CLI with the network provider.
Dialling using the directory, the call-by-call list (page 1, page 19) or the calls and last number redial list (page 23/page 22) saves you from having to re-enter numbers and network provider prefixes ("call-by-call numbers").
Call display with CLIP/CLI
If the number of the caller is saved in your directory, you will see their name, and if you have assigned a CLIP picture to that caller, this will also be displayed.

Ending a call

a Press the end call key.

Accepting a call

The handset indicates an incoming call in three ways: by ringing, by a display on the screen and by the flashing handsfree key d. You can accept the call by: Pressing the talk key c. Pressing the handsfree key d. Press the display key Accept. If the handset is in the charging cradle and the Auto Answer function is activated (page 41), the handset will take a call automatically when you lift it out of the cradle.

1234567890

Accept Silence
1 Ringer tone icon 2 Number or name of caller
The following is displayed in place of the number: u External, if no number is transmitted. u Withheld, if the caller has withheld Calling Line Identification. u Unavailable, if the caller has not arranged Calling Line Identification.

Handsfree talking

Delete all a Open menu. Select, press OK and confirm with Yes. The list is cleared. Press and hold (idle status).

Receiving an SMS

All received SMS messages are saved in the incoming message list. Linked SMS messages are displayed as one message. If this is too long or is not transferred completely, it is split into individual messages. Since an SMS remains in the list even after it has been read, you should regularly delete SMS messages from the list. The display tells you if the SMS memory is full. Deleting SMS messages you no longer require (page 29).
Sending SMS messages to an e-mail address
If your service provider supports the SMS as e-mail feature, you can also send your SMS messages to e-mail addresses. The e-mail address must be at the beginning of the text. You must send the SMS to the e-mail service of your SMS send centre. v (mailbox, mailbox PIN) New SMS /~ Load the e-mail address from the directory or enter it directly. End the entry with a space or colon (depending on the service provider). ~ Enter the SMS text. Options Press the display key. Send Select and press OK. E-mail Select and press OK. If the number of the e-mail service is not entered (page 31), enter the number of the e-mail service. Send Press the display key.

Incoming message list

The incoming message list contains: u All received SMS messages, starting with the most recent. u SMS messages that could not be sent due to an error. New SMS messages are signalled on all Gigaset S67H handsets by the icon in the display, the flashing message key f and an advisory tone.
Opening the incoming message list with the f key
f Press. Select mailbox if necessary and enter mailbox PIN. The incoming message list is displayed as follows (example):
SMS: (2) 1 bold: number of new entries regular: number of read entries 2 Name of mailbox, here: general mailbox Open list with OK.
An entry in the list is displayed as in the following example:

21.11.07

Opening the incoming message list via the SMS menu
v (mailbox, mailbox PIN) Incoming (2)
Adding numbers to the directory
Adding the sender's number
Open incoming message list and select
deleting individual SMS messages", page 27. After you have read a new SMS, it is given the status "Old" (is no longer shown in bold).
Open the incoming message list. Continue as described in "Reading or
entry (page 28). Press the display key. For further information, see page 21.
You can create a special directory for SMS messages within your main directory by putting a star (*) before the names. An attached mail box identifier is added to the directory.

Caution!

You should always check the operation of the room monitor before use. For example, test its sensitivity. Check the connection if you are diverting the room monitor to an outside number. When the function is activated the handset's operating time is severely reduced. If necessary, place the handset in the charging cradle. This ensures that the batteries do not run down. Ideally the handset should be positioned 1 to 2 metres away from the baby. The microphone must be directed towards the baby. The connection to which the room monitor is diverted must not be blocked by an activated answer machine.

Handset settings

v Room Monitor Change multiple line input: Room M.: Select On to activate. Call to: External number: Select the number from the directory (press display key ) or enter it directly. Only the last 4 digits are displayed. Internal number: Options INT OK s (select handset or Call All, if all registered handsets are to be called) OK. Level: Set noise level sensitivity (Low or High). Press Save to save the settings.
Activating the room monitor and entering the destination number
Turn on the activation again and save

with Save (page 39).

Your handset is preconfigured, but you can change the settings to suit your individual requirements.
Shortcuts for functions and numbers
You can assign the left display key and each of the digit keys Q and 2 to O a number or a function. The righthand display key has already been assigned a function. You can change the assignment. The number is then dialled or the function started by simply pressing a key.
Changing set destination numbers
v Room Monitor s Scroll to the Call to: line. X or Delete Delete existing number. Enter number as described in "Activating the room monitor and entering the destination number" (page 39).
Assigning a digit key/left display key
Precondition: The digit key or the left display key has not yet been assigned a number or a function. Press the display key } or press and hold the digit key. The list of possible key assignments is opened. The following can be selected: Quick Dial / Call-by-Call Assign key to a number from the directory or call-by-call list. The directory or call-by-call list is opened. Select an entry and press OK. If you delete or edit an entry in the directory or call-by-call list, this has no effect on the assignment to the digit/ display key. Room Monitor Assign key to the menu for setting and activating the room monitor (see page 38).
Deactivating the room monitor remotely
Preconditions: The phone must support touch tone dialling and the room monitor should be set for an external destination number. Accept the call from the room monitor and press keys 9 ;. The room monitor function will deactivate after the call ends. There will be no further room monitor calls. The other room monitor settings (e.g. no ringer tone) on the handset will remain activated until you press the display key OFF on the handset. To reactivate the room function with the same phone number:

Handset settings Alarm Clock Assign key to the menu for setting and activating the alarm clock (see page 44). Calendar Open calendar/enter new appointment. More Features. More functions are available: INT Internal calls (see page 36). SMS Assign the menu for SMS functions to a key (see page 26). SMS Service Assign key with the menu for ordering info services (page 32). SMS Notific. Assign key with the menu for activating SMS notification (page 30). If the left display key has been assigned a shortcut, the selected function or name of the phone number in the directory or callby-call list is displayed (abbreviated if necessary) in the bottom display line via the display key.
Proceed as is described when first
assigning the key with a shortcut (page 39).

Digit key

Change
Press the digit key briefly.
Press the display key. The list of possible key assignments is displayed. Proceed as is described when first assigning the key with a shortcut (page 39).
Changing the display language
You can view the display texts in different languages. v Handset Language The current language is indicated by . s Select a language and press OK. a Press and hold (idle status). If you accidentally choose a language you do not understand: v N 4
Press keys in sequence. s Select the correct language and press OK.
Starting the function, dialling the number
If the handset is in idle status, press and hold the digit key or press the display key briefly. Depending on the key assignment: u Numbers are dialled directly. u The function menu is opened.

Setting the display

You have a choice of four colour schemes and several different contrasts. v Display Colour Scheme Select and press OK. s Select a colour scheme and press OK ( = current colour). a Press briefly. Contrast Select and press OK. r Select contrast. Save Press the display key. a Press and hold (idle status).

Changing key assignments

Display key
key. The list of possible key assignments is opened.
Press and hold the left or right display

Setting the screensaver

You can set a picture from the Resource Dir. (page 43) to be displayed as a screensaver when the handset is in idle status. This will replace the idle status display. It may conceal the date, time and name. The screensaver is not displayed in certain situations, e.g. during a call or if the handset is deregistered. If a screensaver is activated, the Screen Saver menu option is marked with . v Display Screen Saver The current setting is displayed. Change multiple line input: Activation: Select On (screensaver is displayed) or Off (no screensaver). Selection: If required, change the screensaver (see below). Save changes: (page 56). If the screensaver conceals the display, briefly press a to show the idle display with time and date.

Sounds: setting the volume
During playback: Volume Press the display key. r Set volume. Save Press the display key.
Renaming/deleting a picture
You have selected an entry. Options Open menu. If a picture cannot be deleted (), these options are not available. Depending on the situation, you can select the following functions: Delete Entry The selected entry is deleted. Delete List All entries in the list that can be deleted are deleted. Rename Change the name (max. 16 characters) and press Save. The entry is saved with the new name.

Setting the alarm clock

Precondition: The date and time have already been set (page 9).
Activating/deactivating advisory tones
Your handset uses "advisory tones" to tell you about different activities and statuses. The following advisory tones can be activated and deactivated independently of each other: u Key click: Every key press is confirmed. u Acknowledge tones: Confirmation tone (ascending tone sequence): at the end of an entry/ setting and when an SMS or a new entry arrives in or call history
v Change multiple line input: Activation: Select On or Off. Time: Enter the wake-up time in 4-digit format. Occurance: Select Daily or Monday-Friday.
Activating/deactivating the alarm clock and setting the wake-up time
Handset settings Volume: Set the volume (16). Melody: Select melody. Save changes: (page 56). The icon is shown in the display. A wake-up call with selected ringer tone (page 42) is signalled on the handset. The wake-up call sounds for 60 seconds. is shown in the display. If no key is pressed, the wake-up call is repeated twice at five minute intervals and then turned off. During a call, the wake-up call is signalled by a short tone. have already been saved are highlighted in black.) The list of saved appointments for the day is displayed. If you have already saved 30 appointments, you must first delete an existing appointment. <New Entry> Select and press OK. Change multiple line input: Appoint.: Select On or Off. Date: Enter day/month/year in 8-digit format. Time: Enter hours/minutes in 4-digits format. Notes: Enter text (max. of 16 characters). The text appears as the appointment name in the list and will be displayed on the screen during the appointment reminder. If you do not enter any text, only the date and time of the appointment are displayed. Save Press the display key. a Press and hold (idle status). The appointment is marked with in the appointments list. The list of appointments is sorted by date. An appointment reminder is signalled with the selected ringer tone (page 42). The appointment reminder sounds for 60 seconds. The entered text, date and time are displayed. During a call, the appointment reminder is signalled by a short tone.

Deactivating the wake-up call/ repeating after a pause (snooze mode)
Precondition: A wake-up call is sounding. OFF Press the display key. The wake-up call is deactivated. or Snooze Press the display key or any key. The wake-up call is deactivated and then repeated after 5 minutes. After the second repetition the wake-up call is deactivated completely.
Setting an appointment (calendar)
You can have your handset remind you of up to 30 appointments (volume and melody, see page 42).

Saving an appointment

Precondition: The date and time have already been set (page 9). v r/q Select the day in the graphical calendar and press OK. (Days on which appointments
v r/q Select the day in the graphical calendar and press OK. (Days on which appointments have already been saved are highlighted in black in the calendar.) q Select appointment for the day. Options Open menu Back with. You have the following options: View Entry View selected appointment, open the Options menu for editing, deleting and activating/ deactivating. Edit Entry Edit selected appointment. Delete Entry Delete selected appointment. Activate / Deactivate Activate/deactivate the selected appointment. Delete List Delete all appointments.

Managing appointments

Displaying missed appointments and anniversaries
Missed appointments/anniversaries (page 21) are displayed in the Missed Alarms list if: u You do not accept an appointment/ anniversary. u The appointment/anniversary was signalled during a phone call. u The handset is deactivated at the time of the appointment/anniversary. u Automatic redial was activated at the time of an appointment/anniversary (page 22). The most recent entry is at the head of the list. If there is a new appointment/anniversary in the list, the display shows Appoint. Pressing the display key will also open the Missed Alarms list. To open the list from the menu: v Missed Alarms Select appointment/anniversary. Information about the appointment/anniversary is displayed. A missed appointment is displayed with the appointment name and a missed anniversary is displayed with the last name and first name. The date and time will also be given. Delete Delete appointment SMS Write an SMS. a Press and hold (idle status). If 10 entries are already stored in the list, the next appointment reminder will delete the oldest entry.

Handset does not ring. 1. The ringer tone is deactivated. Activate the ringer tone (page 43).
2. Call diversion set to All Calls. Deactivate call diversion (page 17).
You cannot hear a ringer/dialling tone from the fixed network. The phone cord supplied has not been used or has been replaced by a new cord with the wrong jack connections. Please always use the phone cord supplied or ensure that the jack connections are correct when purchasing from a retailer (page 7).
Error tone sounds after system PIN prompt. You have entered the wrong system PIN. Reset the system PIN to 0000 (page 47).
Forgetting the system PIN. Reset the system PIN to 0000 (page 47). Call charges are not displayed. 1. Your network provider does not support this feature. 2. There are no metering pulses. Ask your network provider to transmit the metering pulses.
The other party cannot hear you. You have pressed the u (INT) key. The handset is "muted". Activate the microphone again (page 16).
The number of the caller is not displayed despite CLIP. Calling Line Identification is not enabled. The caller should ask the network provider to release Calling Line Identification (CLI). You hear an error tone when keying an input (a descending tone sequence). Action has failed/invalid input. Repeat the operation. Watch the display and refer to the user guide if necessary. You cannot listen to messages on the network mailbox. Your phone system is set for pulse dialling. Set your phone system to touch tone dialling.

Service (Customer Care)

You can get assistance easily when you have technical questions or questions about how to use your device by using our online support service on the Internet at: http://www.siemens.com/gigasetcustomercare This site can be accessed at any time wherever you are. It will give you 24/7 support for all our products. It also a list of FAQs and answers plus user guides for you to download. You will also find frequently asked questions and answers in the Questions and Answers section of this user guide in the appendix. If the device needs to be repaired, please contact one of our Customer Care Centers: Abu Dhabi.800 Argentina. 0800-888-9878 Australia.366 Austria. 04 (0,065 Euro/Min.) Bahrain.173 Belgium. 79 Bosnia Herzegovina. 649 Brazil. Grande Capitais e Regies Metropolitanas:. 4003 3020. (US$ 0,59) Demais localidades:. 1248. (US$ 0,59) Bulgaria. Canada. 701-355-3984 China. 6007 Croatia. (0,23 Kun) Czech Republic. 727 Denmark. Dubai.944 Egypt. Finland. 25 France. 00 Germany.222 (0,14 Euro/Min.) Greece. 6 (0,026 Euro) Hungary. 44 (27 Ft) Ireland. 77 Italy. Kuwait. Latvia. Luxembourg. 40 Malaysia.Malta. +Mexico.Netherlands.0900-3333102 (0,25 Euro/min.) New Zealand. 63 Norway. Oman. 281 Poland. Portugal. 808781223 Romania. 00 Russia. 8 (495) Serbia. 80 Singapore. Slovak Republic. 66 Slovenija. 36 (6,30 Tolar) South Africa. 57 Spain. Sweden. Switzerland. 000 (0,08 SFr./Min.) Taiwan. 06 Thailand. 1118 Turkey. Ukraine.+380-44-451-71-72 United Arab Emirates. 86 United Kingdom. USA. 1-866 247-8758. (toll free)

Writing an SMS/name (without predictive text)
Press the relevant key several times to enter letters/characters.

Standard characters

Date: Enter the day, month and year in 8-digit format. The second line is marked with [ ] to show it is active. Enter the date using the digit keys. Time: Enter hours/minutes in 4-digit format.

9x 10x

Press the s key.

L M N O Q

a d g j m p t w.

b e h k n q u x ,

1 c f i l o r v y ?

6 s 8 z !

The fourth line is marked with [ ] to show it is active. Enter the date using the digit keys.

1) Space 2) Line break

The handset switches to idle status. Version 4, 16.09.2005
Save the changes. Press the display key Save. Then press and hold the a key.
When you press and hold a key, the characters of that key appear in the display and are highlighted one after the other. When you release the key, the highlighted character is inserted into the input field.
Setting upper/lower case or digits
Press the hash key # briefly to switch from "Abc" mode to "123" and from "123" to "abc" and from "abc" to "Abc" (upper case: 1st letter upper case, all others lower case). Press the hash key # before entering the letter. You can see in the display whether upper case, lower case or digits is selected.
If you press and hold the hash key # you switch from "Abc" mode to "123" and from "123" to "abc" and from "abc" to "Abc".
Deactivating/activating predictive text
Precondition: You are writing an SMS. Options Press the display key. Predictive Text Select and press OK ( = on). a Press the end call key briefly to return to the text field. Enter the text.
Writing SMS (with predictive text)
EATONI predictive text helps you when you are writing SMS messages. Each key between Q and O is assigned several letters and characters. These appear in a selection line immediately under the text panel (over the display keys) as soon as you press a key. The letter you are most likely looking for is shown in reversed highlights and is at the beginning of the selection line. It is copied into the text panel.
SMS 572(1) Hello Peter, I cannot come today. W
1 Remaining number of characters, in brackets: SMS part 1-n 2 SMS text 3 Selection line 4 EATONI is activated 5 Upper/lower case or digits
If this letter is the one you want, confirm it by pressing the next key. If it does not match the one you want, press the hash key # briefly until the letter you are looking for is reverse highlighted in the display line and then transferred to the text field. Version 4, 16.09.2005

Gigaset S670 / IM-NORD EN / A31008-M1904-R201-1-SM19 / accessories_SAG.fm / 4.6.07

Accessories

Gigaset Handsets
Upgrade your Gigaset to a cordless PABX:

Gigaset handset S67H

u u u u u u u u u
Illuminated graphical colour display (65 k colours) Illuminated keypad Handsfree talking Polyphonic ringer tones Directory for around 250 entries Picture CLIP SMS (precondition: CLIP must be enabled) Headset socket Room monitor www.siemens.com/gigasetS67H

Gigaset Handset SL37H

u u u u u u u u
Illuminated graphical colour display (65 k colours) Illuminated keypad Handsfree talking Polyphonic ringer tones Directory for around 250 entries Picture CLIP SMS (precondition: CLIP must be enabled) PC interface, e.g. for managing directory entries, ringer tones and screensavers u Headset socket u Bluetooth u Room monitor u Walky-talky function www.siemens.com/gigasetSL37H

Gigaset Handset SL56

Illuminated graphical colour display (65 k colours) Illuminated keypad Handsfree talking Polyphonic ringer tones Directory for around 250 entries Picture CLIP SMS (precondition: CLIP must be enabled) Voice dialling PC interface, e.g. for managing directory entries, ringer tones and screensavers u Headset socket u Bluetooth www.siemens.com/gigasetSL56

Gigaset Handset S45

Illuminated colour display (4096 colours) Illuminated keypad Handsfree talking Polyphonic ringer tones Directory for around 150 entries SMS (precondition: CLIP must be enabled) Headset socket Room monitor www.siemens.com/gigasets45

Gigaset Handset E45

Dust and splashproof casing Illuminated colour display (4096 colours) Illuminated keypad Handsfree talking Polyphonic ringer tones Directory for around 150 entries SMS (precondition: CLIP must be enabled) Headset socket Room monitor www.siemens.com/gigasete45

Gigaset repeater

The Gigaset repeater can be used to increase the reception range of your Gigaset handset to the base station. www.siemens.com/gigasetrepeater
Gigaset HC450 door intercom for cordless phones
u Use the intercom from your cordless phone no need

for a fixed home phone

u Intuitive user functions using the softkeys u u u u u u
(open door, switch on entry light) Simple to configure using the handset menu Divert to outside phone numbers (intercom feature) Simple to install and register with the Gigaset system Replaces existing call button no further cable is needed Supports the existing doorbell and standard door opener Configuration options for the second ringer key (separate intercom call, activating interior lighting, or function such as first ringer key) www.siemens.com/GigasetHC450

All accessories and batteries are available from your phone retailer. Only use original accessories. This will avoid possible health risks and damage to property, and also ensure that all the relevant regulations are complied with.
Gigaset S670 / IM-NORD EN / A31008-M1904-R201-1-SM19 / S670SIX.fm / 4.6.07
Access code for a PABX. 49 Access protection. 47 Accessories. 58 Acknowledge tones. 44 Activating advisory tones. 44 appointment. 45 call acceptance. 41 handset. 10 internal listening in. 37 keypad lock. 10 room monitor. 39 Advisory tones. 44 Alarm clock. 44 Alert tone. 43 Anniversary. 21 deactivating. 22 missed. 22, 46 saving in directory. 21 Appointment. 45, 46 Appointment/anniversary display missed. 46 Appointments activating/deactivating. 46 deleting. 46 managing. 46 Area code setting own dialling code. 47 Assigning a key. 39 Assigning numerical keys. 39 Authorisation. 54 Automatic call acceptance. 15, 41 last number redial. 22 network provider preselection. 24
setting. 47 system PIN. 47 Battery charging. 1, 9 display. 1, 9 fitting. 7 icon. 1, 9 recommended batteries. 54 tone. 44 Beep, see Advisory tones Best base station. 36 Birthday, see Anniversary Bluetooth connection setting own area code. 47
Calendar. 45 Call accepting. 15 disconnecting (toggling). 17 ending. 15 external. 15 internal. 36 party listening in. 37 transferring (connect). 36, 38 Call acceptance. 41 Call diversion. 17 Call duration. 15 Call history. 23 Call waiting accepting/rejecting. 17 activating/deactivating. 17 internal call. 37 Call-by-call. 19 numbers. 19, 24 Call-by-call list key. 1 Calling Line Identification. 15 Care of the telephone. 51 Changing destination number. 39 dialling mode. 49 display language. 40 earpiece volume. 42 handsfree volume. 42 internal number of a handset. 38 name of a handset. 38 pause time. 49 ringer tone. 42 system PIN. 47 61
Base station changing. 36 connecting. 7 connecting and installing. 6 connecting to PABX. 49 range. 7 restoring to factory settings. 48
Index Character set. 27, 29 Charge status display. 1 CLI, CLIP. 15 CLIP picture. 15, 19, 43 Conference. 17 Configuring the network mailbox. 34 Confirmation tone. 44 Connecting, base station to PABX. 49 Consultation. 17 Consultation call (internal). 37 Control key. 1, 10 Correcting incorrect entries. 12 Customer Care. 53 Display backlight. 41 changing display language. 40 contrast. 40 in idle status. 11 memory (directory/call-by-call). 20 missed appointments/ anniversaries. 46 network mailbox report. 34 number (CLI/CLIP). 15 screensaver. 41 setting. 40 wrong language. 40 Display keys. 1, 10 assigning. 39 Draft message list (SMS). 27