Broadband Modem

SMC7908VoWBRA
ADSL2 BarricadeTMg Wireless Broadband Voice ADSL Router with built-in Annex A ADSL2/2+ Modem

OVERVIEW

The ADSL2/2+ BarricadeTMg, SMC7908VoWBRA, is an all-in-one solution for connecting and sharing your ADSL Broadband connection in your home or office. With different softwares provided, SIP or H.323 protocol is supported in this product and one FXS, one FXO VoIP channel allow user connect to analog phone. This multifunction Annex A ADSL router combines a 2.4GHz 54Mbps 802.11g Wireless Access Point, 4 10/100Mbps RJ45 ports for connection to a PC or Network and an RJ11 WAN port that connects to your ADSL line. The four 10/100Mbps RJ45 ports can be connected to a network hub or switch to expand the number of people sharing your ADSL connection in your home or your office. The SMC7908VoWBRA also has a built in DHCP server to make implementing and expanding your network simple and easy. This device supports ADSL2+ G.dmt, which gives you download speeds of up to 24Mbps and upload speeds of up to 1Mbps. Its SPI Firewall security provides a high level of security for your network. This new device is a complete ADSL solution for PC or MAC users. Graphical user interface software is provided for easy installation, configuration, and management. The LED display panel on the front of the product shows at-aglance the Ethernet activity, ADSL status, WLAN status, USB, Power and VoIP status with both Phone(FXS Ports) and Line.

FEATURES

BENEFITS
VoIP technology provides users a solution of voice communication over the IP networks/Internet. Built-in ADSL (G.992.1/G.992.2/992.3/992.5) bridge/modem provides the internet data/voice accessibilities Built-in 802.11b/g WiFi module allows users to access internet wirelessly Routing from WAN to LAN & Sharing the Internet access Gateway features like NAT, SPI firewall and VPN pass-through provide the capability of constructing secure networks.
High speed internet Access accessibilities
Flexibility and scalability

Easy Setup Security

www.smc.com

TECHNICAL SPECIFICATIONS

PORTS One ADSL port with RJ-11 connector for Internet Connection Two RJ-11 voice interfaces on board, one FXS for connecting telephone and one FXO for failover to PSTN Four 10/100 BaseT Ethernet LAN connection to connect PC SIP: One USB 1.1 connecting USB printer or storage device H.323: One USB 1.1 connecting USB printer One reset button to reset system One power jack DC12V 1A ADSL FEATURES Supports DMT line modulation Supports Annex A Full-Rate ADSL: up to 12Mbps downstream, Up to 1Mbps upstream (G.992.1 &T1.413, Issue 2) Supports G.Lite ADSL: up to 1.5Mbps downstream, up to 512Kbps upstream Up to 600 meters increase and support 12 mbps for ADSL2 & 24 Mbps for ADSL2+ Support G.992.1 G.dmt /G.992.2 G.lite/G.992.3 ADSL2/G.992.5 ADSL2+ line coding Service Class UBR, VBR or CBR selectable, CBR peak rate selectable. VPI/VCI selectable OAM F4/F5 flow support Dying GASP support VoIP FEATURES SIP or H.323 (separate firmware needed) CODEC G.711 a/u-law with packeterization period 20ms G.729a voice compression Echo cancellation G.168 G.723.3 DTMF in-band and out-band DTMF tone generation and relay QoS process with TOS, Diffserv VAD, comfort noise generation Silence Threshold H.323: T.38 fax relay and modem relay (future) Support independent dialing plan (E.164) Call Waiting Call Forwarding (future) Caller ID (FSK and DTMF) Jitter buffer MANAGEMENT FEATURES Firmware upgrade via WEB Based Management WEB Based Management (configuration) Power Indicators Event &History logging Telnet, SNTP support Network Ping SNMP v.1/v.2 support TFTP ATM FEATURES RFC1483 Encapsulation (IP, Bridging & encapsulated routing) PPP over ATM (LLC &VC multiplexing) (RFC2364) Classical IP (RFC1577) Traffic shaping (UBR, CBR, and VBR) OAM F4/F5 support PPP over Ethernet Client SECURITY FEATURES 64/128 bit WEP encryption support

WPA(Wi-Fi Protected Access), wireless protection supported 802.1x/WPA-PSK Authentications supported Mac Address Filtereing control list for wireless devices Password protected configuration access User authentication (PAP/CHAP) with PPP SPI Firewall NAT and NAPT address translation VPN pass through (IPSec-ESP Tunnel mode,L2TP, PPTP) LAN FEATURES IEEE 802.1d (self learning transparent Bridging) DHCP Server QoS Feature TOS = 5 for voice packet TOS = 0 for data packet VLAN tagging 802.1P enabled QoS with marking, queuing and scheduling DNS Proxy/Relay Static Routing, RIP v.1 and RIP v.2 APPLICATION Netmeeting, ICQ, Real Player, QuickTime, DialPad, PC Anywhere MSN messenger support WIRELESS RF MODULE FREQUENCY BAND 13 channels / frequenies 802.11g Radio: 2.4GHz 802.11b Radio: 2.4GHz USA - FCC 2412 ~ 2462MHz (Ch1~Ch11) Canada - IC 2412 ~ 2462MHz (Ch1~Ch11) Europe - ETSI Japan - STD-T66/STD-33 2412~2484MHz (Ch1~Ch14) MODULATION TYPE OFDM, CCK STANDARDS IEEE 802.3, 802.3u, 802.11g, 802.1D ITU G.dmt ITU G.Handshake ANSI T.413 issue 2 - ADSL full rate ITU G.992.3 - ADSL2 ITU G.992.5 - ADSL2+ (future) COMPATIBILITY CE, ETSI, R&TTE,FA (Frequency Authority) FCC Part 15 class B & Part 68 ETS 300 328, EN301489-1/-17 SAFETY GS (EN60950) INTERNET STANDARDS RFC 826 ARP RFC 791 IP RFC 792 ICMP RFC 768 UDP RFC 793 TCP RFC 783 TFTP RFC 1483 AAL5 Encapsulation RFC 1661 PPP RFC 1866 HTML RFC 2068 HTTP RFC 2364 PPP over ATM RFC2516 PPPoE OPERATING CHANNELS 802.11b compliant 11 channels (US, Canada) 13 channels (ETSI) 802.11g compliant b-mode Modulation Rate-Output Power (dBm) 1Mbps 16 dBm 2Mbps 16 dBm 5.5Mbps 16 dBm 11Mbps 16 dBm g-mode Modulation Rate-Output Power (dBm) 6Mbps 15 dBm 9Mbps 15 dBm 12Mbps 15 dBm 18Mbps 15 dBm 24Mbps 15 dBm 36Mbps 15 dBm 48Mbps 15 dBm 54Mbps 15 dBm b-mode Modulation Rate-Receiver Typical Sensitivity(dBm) 1Mbps -90 dBm 2Mbps -88 dBm 5.5Mbps -85 dBm 11Mbps -84 dBm g-mode Modulation Rate-Receiver Typical Sensitivity (dBm) 6Mbps -88 dBm 9Mbps -878 dBm 12Mbps -84 dBm 18Mbps -82 dBm 24Mbps -79 dBm 36Mbps -75 dBm 48Mbps -68 dBm 54Mbps -68 dBm TEMPERATURE 0 to 50 degrees C (Maximum Operating) -40 to 70 degree C (Non-operation) HUMIDITY 10%to 90% (Non condensing) Vibration: IEC 68-2-36, IEC 68-2-6 Shock: IEC 68-2-29 Drop: IEC 68-2-32 DIMENSIONS 220 x 133 x 25 mm 8.7 x 5.24 x 1 in WEIGHT 370g .82lbs POWER INPUT 12V/1A ANTENNA GAIN 2 dBi

Contact

North America 38 Tesla Irvine, CA 92618 1-800-SMC-4YOU 24/7 Technical Support Europe / Africa Fructuos Gelabert 6-Sant Joan Desp Barcelona, Spain Check www.smc.com for your local country contact information

SMC7908VoWBRA/B

The VoIP Configuration Guide assumes your Internet is already set up. For instructions on setting up your Internet connection please refer to the Quick Installation Guide (QIG) provided. 1. The first step is to verify your VoIP service provider has provided all the required configuration settings. The following table lists the mandatory settings required for successful configuration. To obtain these settings please contact your VoIP service provider. Parameters Username Password Phone number SIP Domain Realm SIP Proxy Server address Proxy Port SIP Registrar Server address Registrar Port Preferred Codec

SMC7908 VoWB A VoWB RA R

Example myusername mypassword 123456 domain.com realm.com sip.domain.com 5060 sip.domain.com 5060 G.729
Tip: Commonly the SIP Proxy and SIP Registrar Server Address and Port are the same. If you only have the Address and Port settings for the SIP Proxy you can try using the same Address and Port for the SIP Registrar. If registration fails you will need to verify the SIP Registrar settings with your VoIP service provider. 2. Logon to the Web Management Interface and click on Advanced Setup. From the Advanced Setup screen click on menu VoIP, then submenu VoIP Account. You are now ready to enter the configuration settings provided by your VoIP service provider. 3. Select Account 1 for Account Profile and tick the Activated tick box to activate the account. Un-ticking this box will disable the account. Note: You can configure up to 4 VoIP accounts. This is done by selecting account profiles 1-4 and entering the VoIP configuration settings. 4. Select your VoIP service provider from the VoIP Provider drop down list. This will automatically configure the SIP Domain, Realm, Proxy Address, Proxy Port, Registrar Address and Registrar Port settings. If your VoIP service provider is not listed select Other. 5. Input the Username, Password and Phone Number provided. For the Display Name enter your phone number. This is the number that will be displayed when you make a call. Tip: To hide your phone number, enter Anonymous in Display Name.
6. If your VoIP provider was not listed in Step 4, manually input the SIP Domain, Realm, Proxy Address, Proxy Port, Registrar Address and Registrar Port provided. Otherwise skip this Step. 7. Select the preferred Codec from the Selected Codecs list. The Up and Down buttons are used to change the Codec priority. The preferred Codec goes at the top. Click Save Settings button to save configuration.
8. Click submenu VoIP Extensions and select your country from the Telephony Tone Country Setting drop down list. Click Save Settings button to save configuration.
9. The basic setup is now complete. Click submenu VoIP Status and Call logs to verify the SIP registration status. If registration status is Success you are ready to make phone calls. If registration status is Fail check the following: Check the Internet connection is working. Check you have entered your VoIP configuration settings correctly. Contact your VoIP service provider to verify your configuration settings are correct and to verify their Server is working. For troubleshooting tips refer to the troubleshooting section in the Manual and QIG. For detailed information on configurable settings refer to the Manual.