Wireless

SMCWIPCAM-G
EZ Connectg Wireless IP Camera with Pan/Tilt and MPEG4 support

OVERVIEW

The SMCWIPCAM-G is an MPEG-4 (Wireless) Pan/Tilt Internet Camera, a standalone system that can be connected directly to an Ethernet or Fast Ethernet, and also supported by the wireless transmission based on the IEEE 802.11g standard. With support for latest MPEG-4 technology, you can record streaming video that utilizes high quality MPEG-4 images to your hard drive, enable motion detection and setup automated email alerts for security. The built-in microphone provides you with the audio function, allowing you to watch and listen from the camera. Compared to the conventional PC Camera, the camera features a built-in CPU and web-based solutions that can provide a cost-effective solution to transmit the real-time high-quality video images and sounds synchronously for monitoring. The camera can be managed remotely, so that you can use a web browser to access and control it from any notebook/desktop PC over the Intranet or Internet. The simple installation procedures and webbased interface allow you to integrate it into your network easily. With comprehensive applications supported, the Internet camera is your best solution for remote monitor, high quality, and high performance video images. The SMCWIPCAM-G has a built-in CPU, no special hardware (such as a PC frame capture card) or software required. The camera supports DirectX 9.0; therefore, the only requirement you need is the web browser software such as Internet Explorer 5.0 or above. Once you have a valid IP Address, just connect it and you can view the picture and receive sound from your camera. In addition, the cameras stand allows you to adjust the camera for optimal viewing angle. You can tilt the camera right or left (up to 170/ 170 degrees), forward or backward (up to 45/90 degrees). The camera supports TCP/IP networking, SMTP e-mail, HTTP and other Internet related protocols. It can be utilized in a mixed operating system environment, including Windows 98SE/ME/ 2000/XP. Moreover, it can be integrated easily into other www/ Intranet applications. Applying a standard web browser, the administrator can configure and manage the camera directly from its own web page via the Intranet or Internet. Up to 64 users name and password are permitted with privilege setting controlled by the administrator. The powerful IPView Pro application assigns the administrator with a pre-defined user ID and password, allowing the administrator to modify the camera settings from the remote site via Intranet or Internet. When new firmware is available, you can also upgrade remotely over the network for added convenience. Users are also allowed to monitor the image, and take snapshots.

FEATURES

Easy to Install and Use Support for Variety of Platforms

BENEFITS

Installation in 5 minutes using the EZ Installation Wizard from the CD-ROM The camera works with all major operating systems. ActiveX and DirectX are supported. The camera can be embedded into Internet/ Intranet pages as well. Web-based management, IP View Pro software for professional usage included No need for additional purchase of bracket kits. You can easily access the camera from anywhere having an Internet access.
Web Configuration / Additional Software Wall Mounting Kit Remote Access

www.smc.com

TECHNICAL SPECIFICATIONS SMCWIPCAM-G
VIDEO SPECIFICATION RESOLUTION 640 x 480 pixel SENSOR Color CMOS sensor LENS F1.8, f6.0 mm Board Lens MINIMUM ILLUMINATION 0.5 Lux GAIN CONTROL Automatic WHITE BALANCE Automatic MOTION DETECTION Yes IMAGE (VIDEO SETTING) Image compression MPEG-4 FRAME RATE 30fps @ QQVGA, 30fps @ QVGA, 30fps @ VGA COMPRESSION RATE SELECTION 5 levels Very low/Low/ Middle/High/Very high FRAME RATE SETTING 5/7/10/15/30 (depends on the video format) VIDEO RESOLUTION 160x112, 320x240, 640x480 AUDIO MIC Input Internal MIC (mono) SENSITIVITY 42dB HARDWARE LAN Connector One RJ-45 port, 10/100M auto-sensed, AutoMDIX WIRELESS LAN Built-in 802.11g WLAN COMMUNICATION PROTOCOL HTTP, TCP/IP, UDP, ARP, ICMP, BOOTP, RARP, DHCP PPPoE, DDNS, UPnP, SMTP, SMB, NTP OS Linux POWER SUPPLY DC 5V 2.5A, switching type POWER CONSUMPTION 8 Watt (1600mA x 5V) LED INDICATOR Power LED (Blue) Link LED (Orange) PAN/TILT Pan -170~ +170 Tilt +45 ~ -90 SOFTWARE Browser Internet Explorer 5.0 or above APPLICATION SOFTWARE IPView Pro OS SUPPORTED Microsoft Windows 98SE/ ME/2000/XP OPERATING ENVIRONMENT Operating temperature 5OC ~ 40OC STORAGE TEMPERATURE -25OC ~ 50OC HUMIDITY 5% ~ 95%, non-condensing EMI FCC, CE, VCCI