SYNC-Button SYNC-Taste Bouton SYNC Power Button Power Schalter Bouton Marche/Arrt Directional Controls Steuerkreuz Bouton directionnel B-Button B-Taste Bouton B

GB SPECIFICATIONS

Remote XS Controller: Use up to 4 units simultaneously for maximum multi-player fun Integrated speaker for realistic positional audio effects Built-in memory to save settings and avatars Strong vibration effects External SYNC button for convenient synchronisation with the console Two LR6/AA batteries required (not included) Synchronisation of the Remote XS Controller In order to use the snakebyte Remote XS Controller with your Nintendo Wii it needs to be synchronised with the console. There are two different ways to synchronise the Remote XS Controller with the console, a permanent (Standard) and a temporary (One Time) mode. In Standard Mode the controller remains synchronised (synced) with the Wii console even when the console is turned off. This setting can only be changed by syncing the controller to another Wii. In One Time Mode the Remote XS Controller can temporarily be synced with a console it is not permanently linked to. The Standard Mode setting is not overwritten by syncing the Remote XS Controller one time to a different Wii. This mode allows you to bring your Remote XS Controller along with your stored Mii avatars and game settings to all your buddies for tons of unadulterated multiplayer fun. How to sync in Standard Mode: Press the SYNC button on the top right of the Remote XS Controller once. Now press and release the SYNC button on the console. Your Remote XS Controllers bottom LEDs will start flashing, indicating a successful hardware-handshake of controller and console. Once the LEDs stop flashing one LED should light permanently, indicating the player number of the Remote XS Controller. Repeat the above steps for each Remote XS Controller you would like to use with your Wii console. The order in which controllers are synced represents the player numbers in multi-player games. How to sync in One Time Mode: Press HOME on the controller that is synchronised permanently with the console. Select WII REMOTE SETTINGS in the upcoming menu, followed by RECONNECT Press 1 and 2 simultaneously on the Remote XS Controller which you want to sync with the Wii console in One Time Mode Repeat the above steps for each controller you would like to temporarily sync with your Wii console. The order in which controllers are synced represents the player numbers in multi-player games. Please be aware of the fact that the temporary synchronisation will be erased once the Wii is turned off and that the Standard Mode settings of the respective Remote XS Controller will then be reactivated. For further information regarding synchronisation please refer to your Wii console manual.
GB OPERATING INSTRUCTIONS
Your Remote XS Controller needs two AA batteries to operate. It is highly recommended to use quality Alkaline batteries for maximum operating time. (You may also use rechargeable NiMH batteries though the actual operating time of the Remote XS Controller will be heavily shortened). Please pay attention to the correct placement of any batteries in the Remote XS Controller, incorrect polarisation leads to defects which void your product guarantee, render the Remote XS Controller inoperable, and on top may cause a horrible acidic mess. Further more do not mix worn-out old batteries with fresh new ones or batteries of different types. Batteries should not be left in the Remote XS Controller for extended periods of non-use in order to avoid leakage (again: horrible acidic mess, you should keep that in mind). Please also pay attention to the appropriate disposal of drained batteries to protect our valuable environment. How to install batteries in your Remote XS Controller Remove the battery cover Insert the batteries into the battery compartment, ensuring the correct placement and polarisation Close the battery cover Proper use of the Remote XS Controller Please fasten the wrist strap onto the fixture in the Remote XS Controllers base and always wear it with a tightened strap lock to avoid accidental slipping. The snakebyte Remote XS Controllers advanced motion sensing technology is highly sensitive: there is no need to move it excessively while playing. Always pay attention to your surroundings and persons around you, e.g. during multiplayer games. The Remote XS Controller can be used in vertical position for Wii games that require its pointer functionality, in horizontal position for classic Virtual Console games, and with accessories such as the Nunchuk and the Classic Controller (Nintendo 1st party originals and respective snakebyte accessories). For further information please refer to your Wii consoles and the respective games manuals.

Connecting the Wireless Motion XS Controller Equip your Wireless Motion XS with batteries Connect the Wireless Motion XS receiver with the Extension Connector Port on the Wii Controller Once console and Wii Remote are activated press the Sync button on the Wireless Motion XS to establish a wireless connection between the Motion XS and the receiver. A proper connection is indicated by constantly lighting LEDs on the receiver and the Wireless Motion XS Controller. Proper use of the Wireless Motion XS Controller The Wireless Motion XS can not be used on its own, without the Wii Remote or snakebyte Remote XS. It adds another dimension to Wii gameplay, but only complements the main controller. When using the motion sensing features of the Wii Remote and the Wireless Motion XS please make sure not to move too excessively. Be sure not to hurt people and/or damage objects around you. Make sure not to lose the Wii Controller and Wireless Motion XS while playing by always wearing the wrist strap and holding both items tightly. There is no need to deactivate your Wireless Motion XS by pressing the Sync button or removing the batteries from the battery compartment. If the Motion XS is not used for some minutes it will automatically enter sleep mode. You just need to press any button to reactivate the Wireless Motion XS. In certain cases you might have to carry out the synchronisation process again (e.g. after an extended period of inactivity). Consult your games manual to find out if the Wireless Motion XS needs to be used. Not all games require a Motion XS Controller extension. The Wireless Motion XS Controller can also be used with rechargeable batteries. It is recommended to use it with regular high quality Alkaline batteries for optimal playing time per set of batteries, but the use of NiMH rechargeable batteries is possible. Your Wireless Motion XS Controller allows you to recharge the NiMH batteries by connecting the controller to a USB port of your choice using a USB cable (type A type mini B) to the USB charging port at its bottom. Under all circumstances make sure that the controller is not connected to any USB port while it is equipped with regular Alkaline batteries. Charging Alkaline batteries will lead to product defects and serious injuries. Further more do not try to recharge batteries while the controller is in use. For further information please refer to your Wii consoles manual.

GB TROUBLESHOOTING

If you encounter any problems using the snakebyte XS Wireless Pack please read this section carefully before contacting our customer support or your dealer. 1. My Remote XS Controller does not work correctly at all. Turn off your Wii console, disconnect the AC adaptor for ten seconds and restart your Wii console. Make sure your Remote XS Controller is either synced in permanent (STANDARD) or temporary (ONE TIME) mode to the console. Please refer to the installation instructions above. 2. My game seems to receive input signals although I do not even touch the controller. Make sure your IR sensor bar (e.g. the snakebyte Wireless Sensor Bar) is placed directly in the line of sight either on top of or below your TV when playing. Also pay attention to the maximum operating distance of the Remote XS Controller. Depending on the sensor bar in use this distance may vary. Try to stay within a range of two to three meters of the sensor bar and console while playing to ensure optimal performance and precision. 3. My Remote XS Controllers precision and reliability seem to decrease. Please make sure that the inserted batteries are not too weak. Replace weak or old batteries with fresh ones (always replace both batteries!) and try again to restore optimal performance. 4. My Remote XS Controllers pointer moves erratically on the screen, regular game control is not possible. Please take care that the sensor bars position matches the consoles setting. Further more you should make sure that there are no interferences between the Remote XS Controllers wireless Bluetooth connection and other wireless devices operating in the 2.4 Ghz wave band such as WiFi routers. Ideally no devices operating in the same room as the Wii console and Remote XS controller should emit radio waves that could potentially interfere with the Remote XS signal transfer. Use the Remote XS Controller from the optimal operating distance of three metres and make sure there are no objects between controller and sensor bar that could influence the signal transfer. Avoid insolation and other intense light sources behind the TV set and sensor bar in order to maintain the optimal detection of the sensor bars infrared LED by the Remote XS Controllers camera. Other sources of infrared light such as candles also cause incorrect detection, avoid placing such light sources within

the Remote XS Controllers camera range. Further more pay attention to the sensor bars correct sensitivity setting in your Wii consoles option menu. In case the problem still persists, please restart your Wii console and sync your Remote XS Controller newly. Make sure the batteries in use are not too weak and replace them with fresh ones if required. In many cases pointing the Remote XS Controller off-screen for a few seconds solves the problem. 5. My Wireless Motion XS Controller does not work correctly at all. Turn off your Wii console and turn it on again immediately. Make sure your main controller is synced with the console and the Motion XS Controllers receiver is firmly attached to the controllers Extension Port. Please refer to the installation instructions above. Please also check whether the Controller is activated (On/ Off button). 6. My game seems to receive input signals although I do not even touch the Wireless Motion XS Controller. Turn off your Wii console and turn it on again immediately, this time making sure the analogue thumbstick of the Motion XS Controller remains in its neutral position during startup. You may also reset the thumbstick by making sure it rests in its neutral position and simultaneously pushing and holding A, B, Plus & Minus on the main controller it is connected with. Keep the buttons pushed for at least three seconds. 7. My XS Controllers are incompatible with certain accessories Unfortunately compatibility with 3rd party accessories can not be guaranteed. This especially refers to light guns, sports packs and the like. Further more incompatibilities with Nintendo accessories may also occur due to differences in regard to button layout and/or shape.

TABLE OF CONTENT

Important Safety Instructions Introduction - Thank you very much! Specifications Installation Troubleshooting Contact and Support Terms of Guarantee Further products of the snakebyte range
A-Button A-Taste Bouton A + & - Button + & - Taste Bouton + & -
IMPORTANT SAFETY INSTRUCTIONS
Before using your snakebyte XS Wireless Pack for Wii please read this manual thoroughly. If you comply with all instructions and tips, using the products is easy and comfortable. Please retain this manual for future reference.
HOME Button (Press for HOME menu) HOME-Knopf (Drcken fr HOME Men) Bouton HOME (permet accder au menu HOME) Speaker Lautsprecher Haut-parleur
If you dont want to lose your warranty, please refrain from disassembling the controllers there are no user serviceable parts inside anyway. Inappropriate handling does invalidate the warranty and leads to malfunctions of the devices. Keep your Remote and Motion XS Controller away from liquids and liquid containers such as vases, bottles, hot baths, jacuzzi tubs, etc. Any damage occurring from liquids invalidates the warranty.
Wireless Motion XS Controller: Motion XS Controller extension for the snakebyte Remote XS Controller or for use with the Wii Remote Wireless connection to the main controller State-of-the-art 2.4 GHz wireless technology, virtually lag-free Extends your Remote XS Controller/Wii Remote with two additional buttons, a full analogue thumbstick and an extra motion sensor enhancing the gameplay Extra small wireless receiver plugs into the main controller and allows for untroubled gameplay No interference: up to four Wireless Motion XS Controllers can be used simultaneously in multiplayer matches 100% compatible with all games that support the original Nunchuk External On/Off and synchronisation buttons Technical data is subject to change without notice.

analogue Thumbstick Analogstick stick entirement analogique SYNC-Button SYNC-Taste Bouton SYNC POWER-Button POWER-Taste Bouton Marche/Arrt
this manual please contact your dealer or our friendly customer support under support@snakebyte-europe.com. Proper use of the Wireless Motion XS The Wireless Motion XS can not be used on its own, without the Wii Remote or snakebyte Remote XS. It adds another dimension to Wii gameplay, but only complements the main controller. When using the motion sensing features of the Wii Remote and the Wireless Motion XS please make sure not to move too excessively. Be sure not to hurt people and/or damage objects around you. Make sure not to lose the Wii Controller and Wireless Motion XS while playing by always wearing the wrist strap and holding both items tightly. There is no need to deactivate your Wireless Motion XS by pressing the Sync button or removing the batteries from the battery compartment. If the Motion XS is not used for some minutes it will automatically enter sleep mode. You just need to press any button to reactivate the Wireless Motion XS. In certain cases you might have to carry out the synchronisation process again (e.g. after an extended period of inactivity). Consult your games manual to find out if the Wireless Motion XS needs to be used. Not all games require a Motion XS Controller extension. The Wireless Motion XS Controller can also be used with regular, non-rechargeable batteries. In this case make sure the controller does not get connected to a USB port under use of the cable that is included in the delivery. Charging Alkaline batteries may lead to product defects and serious injuries. For further information please refer to your Wii consoles manual.
attached to the Wii Controllers Extension Port. Please refer to the installation instructions above. 2. My game seems to receive input signals although I do not even touch the Wireless Motion XS. Repeat the synchronisation process by pressing the Sync button on the Wireless Motion XS, this time making sure the analogue thumbstick of the Wireless Motion XS remains in its neutral position during syncing. You may also reset the thumbstick by making sure it rests in its neutral position and simultaneously pushing and holding A, B, Plus & Minus on the Wii Controller it is connected with. Keep the buttons pushed for at least three seconds. 3. My Wireless Motion XS Controller is incompatible with certain accessories. Unfortunately compatibility with 3rd party accessories can not be guaranteed. This especially refers to light guns, sports packs and the like. Further more incompatibilities with Nintendo accessories may also occur due to differences in regard to button layout and/or shape. You should keep in mind that this product is not a copy of Nintendos Wii Nunchuk.

GB TERMS OF GUARANTEE

We issue a guarantee of two years after purchase of the snakebyte Wireless Motion XS. Therefore, please preserve your invoice, e.g. together with this manual. In order not to invalidate the warranty and to protect your health never try to repair and/or disassemble the device. There are no user serviceable parts inside anyway. On top, the danger of electric shock or even fire is reduced considerably. The guarantee is limited to defective parts or faulty assembly of the Controller exclusively, i.e. it only covers manufacturing defects. Amongst others the following defects can not be asserted: basically all defects resulting from violation of this manual defects resulting from improper use or cleaning mechanical and optical flaws (e.g. scratches, broken casing caused by brute force or carelessness) defects caused by force majeure any defects caused by components that are not themselves parts of or the Controller itself.

TABLE OF CONTENT

Important Safety Instructions Introduction - Thank you very much! Specifications Installation Troubleshooting Contact and Support Terms of Guarantee Further products of the snakebyte range

SPECIFICATIONS

Motion XS Controller extension for the snakebyte Remote XS Controller or for use with the Wii Remote Wireless connection to the main controller (available separately) State-of-the-art 2.4 GHz wireless technology, virtually lag-free Extends your Remote XS Controller/Wii Remote with two additional buttons, a full analogue thumbstick and an extra motion sensor enhancing the gameplay Extra small wireless receiver plugs into the main controller and allows for untroubled gameplay No interference: up to four Wireless Motion XS Controllers can be used simultaneously in multiplayer matches 100% compatible with all games that support the original Nunchuk External On/Off and synchronisation buttons Two rechargeable Ni-MH batteries as well as USB charging cable included in delivery, the controller can be charged using any USB port Technical data is subject to change without notice.
C-Button C-Taste Bouton C
IMPORTANT SAFETY INSTRUCTIONS
Before using your snakebyte Wireless Motion XS for Wii please read this manual thoroughly. If you comply with all instructions and tips, using the Wireless Motion XS is easy and comfortable. Please retain this manual for future reference. If you dont want to lose your warranty, please refrain from disassembling the Wireless Motion XS there are no user serviceable parts inside anyway. Inappropriate handling does invalidate the warranty and leads to malfunctions of the device. Keep your Wireless Motion XS away from liquids and liquid containers such as vases, bottles, hot baths, jacuzzi tubs, etc. Any damage occurring from liquids invalidates the warranty.
Z-Button Z-Taste Bouton Z

CONTACT AND SUPPORT

If you still encounter problems that can not be solved by reading the section troubleshooting, please contact us: Sunflex Europe GmbH Obere Oese Hemer Germany support@snakebyte-europe.com