SOMFY INSTRUCTIONS CHRONIS COMFORT RTS WIREFREE TIMER

Part# 1805176

NOTE: The Chronis Comfort RTS WireFree timer is pre-set to open window coverings at 7:30pm Monday to Friday, at 8:00am on weekends and to close at sunset. These parameters may be modified with professional programming assistance. Please contact Somfy at somfytech@somfy.com or call your local dealer at somfysystems.com/locatedealer. Programming current time of day and date is required. See the following instructions.

SET CALENDAR

- and +
PROGRAMMING - ADDING A CHRONIS TIMER CONTROL
NOTE: During initial programming it is recommended to provide power only to the motor or RTS receiver being programmed A previously programmed Telis transmitter can be used to add a new Chronis Comfort Timer to the Motorized Window Covering. If a Telis transmitter has not been previously programmed. Please refer to the installation instructions of the relevant RTS motorized window covering. 1. Remove plastic battery interrupter from back of Chronis Timer. Unit will assume power at this time. 3. Carefully remove front cover of Chronis Timer, and using a paper clip, pen, or similar device, briefly press the programming button on the Chronis Timer until the window covering jogs. Window covering has now learned the Previously Programmed Remote commands of the Chronis Timer.

Programming Button

2. Using the previously programmed Telis remote, press and hold the programming button on back of remote until window covering jogs (jog is brief back and forth movement of the window covering)

BACK VIEW

PROGRAMMING - SETTING THE CURRENT TIME
1. Press and hold the button until the word CLOC displays on LCD screen. 3. Adjust to current time using the (-) or (+) buttons.
2. Briefly press the button. The time display will blink on LCD screen.
4. Press and hold the button to confirm current time. Displayed time will blink twice as button is held, then display newly set time.
Note: The time display in military time/24 hour format. See chart for time conversion.
12/24 Hr Time Conversion 12pm 12pm 1pm 2pm 3pm 4pm 5pm 6pm 7pm 8pm 9pm 10pm 13pm 14pm 15pm 16pm 17pm 18pm 19pm 20pm 21pm 22pm 11pm 12am 23pm 24pm
Copyright Somfy Systems, Iin. 1/2010

C-0005

PAGE 1 REV 4
PROGRAMMING - SETTING THE CURRENT DATE
1. Press and hold the button until the word CLOC displays on LCD screen. 5. Briefly press the button. Month display will blink on LCD screen.
2. Briefly press the button until the word DATE displays on LCD screen.
6. Adjust to current month using the (-) or (+) buttons.
3. Briefly press the button. Day of the month display will blink on LCD screen.
7. Briefly press the button. Year display will blink on LCD screen

15-06 2009

8. Adjust to current year using the (-) or (+) buttons. 4. Adjust to current day of the month using the (-) or (+) buttons.
9. Press and hold the button to confirm Day/Month Year. Displayed Year will blink twice as button is held. New date is now set. Display will return to main screen.
PROGRAMMING - SETTING AUTOMATIC (UP & DOWN) COMMAND TIMES
NOTE: The Chronis Comfort RTS WireFree timer is pre-set to open window coverings at 7:30AM Monday - Friday, at 8:00AM on weekends, and to close at sunset. These parameters may be modified with professional programming assistance. Please contact Somfy at somfytech@somfy.com or call your local dealer at somfysystems.com/locatedealer 5. Briefly press the button. The current set UP TIME and days of the week (1-7) will blank on LCD screen. 5a. (Optional) To change the UP TIME for a specific day of week briefly press the button repeatedly to select day(s) 1-7 or all. The selected day will blink on the LCD display along with the respective UP time for that day. See reverse chart for number -to-day conversion.

1234567 7:30

Changing UP or OPEN Time
1. Press and hold the button until the word CLOC displays on LCD screen.
3. Briefly press the button until the word UP 1 displays on LCD screen.

T 7:30

Days of Week 7 M T W T F S S

1234567 6:30

6. Adjust time using the (-) or (+) buttons New time and day(s) selection will blink. 7. Press and hold the button to confirm UP TIME and DAY and exit programming. Otherwise, continue to briefly press the button to cycle thru the days of the week (1-7) then adjust respective time as in step 6.
4. Briefly press the button. The word Time will blink on LCD screen.

TIME UP 1

w 17:00 C 17:14

PAGE 2 REV 4

NOTE: The Chronis Comfort RTS WireFree timer is pre-set to open window coverings at 7:30AM Monday - Friday, at 8:00AM on weekends, and to close at sunset. These parameters may be modified with processional programming assistance. Please contact Somfy at somfytech@somfy.com or call your local dealer at somfysystems.com/locatedealer
Changing DOWN or CLOSE Time 1. Press and hold the button until the word CLOC displays on LCD screen. 8. Briefly press the button. The current set DOWN TIME and days of the week (1-7) will blink on LCD screen.

CLOC 8:00

1234567 20:00 TIME

1 DATE

8a. (Optional) To change the DOWN TIME for a specific day of week briefly press the button repeatedly to select day(s) 1-7 or all. The selected day will blink on the LCD display along with the respective DOWN TIME for that day. See Reference chart for number/day conversion.

20:00 TIME

4. Briefly press the button until the word UP 2 displays on LCD screen.
9. Adjust time using the (-) or (+) buttons New time and day(s) selection will blink.

1234567 17:30 TIME

5. Briefly press the button until the word dn 1 displays on LCD screen.

C 17:30

10. Press and hold the button to confirm DOWN TIME and DAY and exit programming. Otherwise, continue to briefly press the button to cycle thru the days of the week (1-7) then adjust respective time as in step 6.

17:30 T 17:30

6. Briefly press the button until the word COS will blink on LCD screen.

COS dn 1

7. Adjust to TIME MODE by briefly pressing the (-) button. The word TIME will blink on the LCD screen.

TIME dn 1

NOTE: Changing to TIME MODE will disable the Chronis Timer from automatically closing the window covering(s) at dusk, therefore permitting the automatic close command to be selected by a pre-set time of day. EXAMPLE: If it is not desired to have the window coverings close (or go down) according to sunset, the user may define a preset close or down time. Note: The time display in military time/24 hour format. See chart for time conversion. Copyright Somfy Systems, Iin. 1/2010

PAGE 3 REV 4

PROGRAMMING - SETTING VACATION (SECURITY) MODE
Vacation mode takes the normal automatic timer settings and randomly varies them (+ or -) by 15 minutes each day. This gives your home the appearance of being occupied. 1. Press and hold the (+) button until the word SEC is displayed on the LCD screen. To cancel VACATION mode, (return to standard time settings) simply press and hold the (+) button until the word SEC is no longer displayed on the LCD screen.

17:00 T SEC

PROGRAMMING - TURNING OFF ALL AUTOMATIC FUNCTIONS
When the Chronis Timer is set to OFF, all automatic timer functions are disabled. Window coverings however can be operated manually via the UP/DOWN/STOP buttons located on the timer control. 1. Press and hold the (-) button until the word OFF is displayed on the LCD screen.
To turn the automatic functions ON, press and hold the (+) button until the word OFF is no longer displayed in the LCD screen.

STOP DOWN

17:00 OFF

CHANGING THE BATTERIES

1. Grasp the top edge of the timer and pull towards you to remove the plastic cover. 2. Slide the timer up to remove it from the mounting bracket. 3. Remove batteries. Replace with size AAA. 4. Place timer back on mounting bracket and slide it down to secure. 5. Secure front cover to timer.

PAGE 4 REV 4