Reviews & Opinions
Independent and trusted. Read before buy Somfy Inteo Telis 1 RTS!

Somfy Inteo Telis 1 RTS

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page 

Download (English)
Somfy Inteo Telis 1 RTS, size: 141 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Somfy Inteo Telis 1 RTSAbout Somfy Inteo Telis 1 RTS
Here you can find all about Somfy Inteo Telis 1 RTS like manual and other informations. For example: review.

Somfy Inteo Telis 1 RTS manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Somfy Inteo Telis 1 RTS please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Somfy Inteo Telis 1 RTS photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 11. Page 1 of 1. Average Rating:
mlopes 4:19am on Monday, July 19th, 2010 
Brilliant graphics. Gunpowder units. Added cut scenes for assasins and spys. AI seems to confuse itself occasionally while running down a broken army.
eBusiness 12:22pm on Tuesday, July 6th, 2010 
A huge immersive, game that everyone should try out! Medieval II is one of the best strategy games ever made with massive tactical battles and an immersive campaign.
PWConner 10:45am on Saturday, July 3rd, 2010 
Loved Rome: Total War, so I thought I would try this game and I like it too. Game runs smoothly on my computer. good expansion, bigger than the original game as previous user said it can get repetive
Grek000 9:46am on Friday, June 25th, 2010 
Medieval II Total was is the second incarnation of the Total war series based in medieval times, also included in the series of Total war are shogun.
mokercucek 4:16am on Tuesday, June 22nd, 2010 
This is an awesome game. I have been playing the total wars since the original medieval, and I am really happy with this.
sicgoe 8:09pm on Friday, June 18th, 2010 
Strategy games, I admit, have always been a passion of mine, such as medieval history, it is not surprising that I "Medieval II: Total War".
LarryD 12:17am on Thursday, May 13th, 2010 
Medieval II: Total War is an epic game spanning the years 1080AD - 1530AD and based within Europe. If you like RTS + Medieval units and enviroment this is for you. Plus the campaign mode is played like Civilization, with you controlling your cities,...
zervolfs 9:44am on Sunday, March 28th, 2010 
Ook. This game is fun do not mistake that. BUT, for me. I for one did not play the first Total War. So...with that being said.
raullconraull 8:35am on Friday, March 26th, 2010 
History. During the Medieval period, the world was experiencing ground breaking advancements in technology, sciences and empire building.
ebontrager 8:47am on Tuesday, March 23rd, 2010 
I think i had fun for about 30 hours with this game befor it got boring. It is fun, very similar the ROME total war not much.
joshdon 12:00pm on Wednesday, March 17th, 2010 
The best strategy game out to-date. Too many to mention. The AI could do with improvements, but there are patches for those who know where to look. The best strategy game out to-date. Too many to mention. The AI could do with improvements, but there are patches for those who know where to look. Great no AWESOME game for strategy play, freedom to reign is unlimited... Accurate historical battles... Great no AWESOME game for strategy play, freedom to reign is unlimited... Massive range of units all with great fun to use traits...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

www.somfy.com

Telis 1 RTS
Operating and installation guide

Ref. 5054463A

Contents
1. Brief introduction to the Telis 1 RTS remote control 1.1 What is the Telis 1 RTS for? 1.2 A few definitions 2. Safety - Important information 2.1 Installation and commissioning 2.2 Operating 2.3 Environment 3. Content of the kit and tools required 3.1 List of parts 3.2 Tools required 4. The Telis 1 RTS in detail 4.1 Components 4.2 Technical data 5. Adding a new Telis 1 RTS 5.1 Identifying the original control point 5.2 One-touch point 5.3 Point with Up/STOP/Down buttons 5.4 Timer 5.5 Situo control point 5.6 Telis 1 RTS Telis Soliris RTS remote controls 5.7 Telis 4 RTS/Telis 4 Soliris RTS remote controls 6. Replacing a lost or broken control point 6.1 Sole control point lost or broken 6.2 One lost or broken control point amongst others 7. Mounting the bracket 8. Everyday use of the Telis 1 RTS 8.1 Up and Down buttons 8.2 My button 8.3 Replacing the battery 8.4 Maintenance 9. Problems with the Telis 1 RTS? 3 4
Copyright 2008 Somfy SAS. All rights reserved.
Somfy's expertise delivers satisfaction guaranteed.
Thank you for choosing a Somfy Telis 1 RTS. Before installing and using the Telis 1 RTS, please read this guide carefully. Somfy solutions animate your windows and entrances to bring your whole house alive. Somfy solutions are designed so that everyone can enjoy the benefits of the products in their home, based on their specific requirements. In this guide, the term product can include your awning, blind, curtain, garage door, gate, projection screen, roller shutter. Well thought-out and easy to use, Somfy solutions are one of lifes little daily pleasures, making home life more enjoyable.
1. Brief introduction to the Telis 1 RTS remote control
These instructions describe the installation steps required to make the best use of the Telis 1 RTS. Advanced installation functions are available on our website (address on the back cover of these instructions).
1.1 What is the Telis 1 RTS for?
The Telis 1 RTS is a wireless radio remote control compatible only with products fitted with Radio Technology Somfy (RTS): The Telis 1 RTS is used: As an individual control to control a single product (eg roller blind) at a time. As a group control to command several products at the same time (eg several roller blinds) (advanced installation function).

1.2 A few definitions

Installation All of the Radio Technology Somfy products a house is equipped with. Favourite position The favourite position is your ideal position for your product in certain
common situations, for example, your curtains or blinds partially closed to shield the TV from afternoon sunlight; your awning partially extended when you are dining beneath it in summer but dont want to deprive your houseplants of sunlight
2. Safety - Important information
2.1 Installation and commissioning
Before installing and using the Telis 1 RTS, please read these instructions carefully, which describe how to install, commission and operate the Telis 1 RTS. Never begin installing without first checking the compatibility of the Telis 1 RTS with the associated equipment and accessories. Any incorrect use will invalidate the warranty and Somfys liability.

2.2 Operating

Somfy recommends that at least one control point is located close to the product or group of products. Do not allow children to play with the fixed control points. Keep remote controls out of the reach of children. Monitor the product (especially roller shutter/awning/garage door/gate) while it is moving, especially during commissioning of the Telis 1 RTS, and keep people at a distance until the product is completely closed. Switch off the circuit breaker corresponding to the roller shutter/awning/ garage door/gate before any maintenance operation in the vicinity of the product (for example, when cleaning windows near your awning). Avoid moving the roller shutter/awning if ice has formed in it, unless the motor is fitted with anti-freeze protection. Do not leave the Telis 1 RTS behind a window in full sunlight as it cannot withstand temperatures greater than 60C. Do not leave the Telis 1 RTS in a car in winter. Do not immerse or soak the Telis 1 RTS in any liquid. Only use cleaning products recommended by Somfy. Frequently check the product (eg awning) to detect any defects in balance or any signs of wear. Do not use the product if a repair or adjustment is required

2.3 Environment

Damaged electrical or electronic products, such as used batteries,
should not be disposed of with household waste. Please take them to a collection point or an approved centre to ensure they are recycled correctly.
3. Content of the kit and tools required

3.1 List of parts

Before starting installation and commissioning of the Telis 1 RTS, check that all parts listed in the table below are present in the correct quantity (Q): 4 No. Components Q. Telis 1 RTS remote control 1 3
Mounting pin Support Plug Screw 1 1

3.2 Tools required

Phillips screwdriver Insulated flathead screwdriver Drill and drill bit Pencil

electricians

4. The Telis 1 RTS in detail

4.1 Components

A. Up button B. STOP/my button C. Down button D. Indicator light E. PROG button

mysomfy.com

4.2 Technical data
Dimensions in mm (Height x Width x Depth): Pure model: 134 x 41 x 21 mm Lounge, Silver, Patio models: 145 x 49 x 22 mm Operating temperature: 0C to + 60C Protection rating: Inside use, in a dry room - IP 30 (Pure, Lounge, Silver Models) ; IP 44 (Patio Model) Frequency: 433.42 MHz Range: 20 m through two concrete walls; 200 m in an open area Battery: 3 V, type CR 2430
5. Adding a new Telis 1 RTS
5.1 Identifying the original control point
5.1.1 Installation recommendations
To add a Telis 1 RTS, use the control point linked to the product which controls only this product: pressing the Down or Up button only causes movement of the product to which the new Telis 1 RTS must be connected. Caution! If there is no longer a control point linked to the product (all the control points are broken or have been lost), contact the Somfy assistance service. N.B.: These instructions only describe the installation procedure for an additional Telis 1 RTS of the individual control type. Refer to the instructions for advanced functions available on the Internet (address on the back cover of these instructions) to install a control referred to as group control. - On some products, inputs in programming mode and the addition or deletion of a control point are signalled by a series of beeps emitted
by the motor. On other products, this is signalled by a brief movement of the product. Caution: If the product does not emit a beep or make a brief movement, please contact the Somfy assistance service. - Place the product in the midway position before installing the new Telis 1 RTS so that the movements can be easily seen.

5.1.2 Original control points
Find the original control point in the list below and refer to the paragraph given to add the new Telis 1 RTS: 1) Control point fixed to the wall with a single button, called a One-touch point, see paragraph 5.2; 2) Control point fixed to the wall with Up/STOP/Down buttons, called a Point with Up/STOP/Down buttons, see paragraph 5.3; 3) Programmer type control point, called a Timer, see paragraph 5.4; 4) Situo control point fixed to the wall, see paragraph 5.5; 5a) Telis 1 RTS remote control, see paragraph 5.6; 5b) Telis Soliris RTS remote control, see paragraph 5.6; 6a) Telis 4 RTS remote control, see paragraph5.7; 6b) Telis 4 Soliris RTS remote control, see paragraph5.7.

5.2 One-touch point

Move close to the product to install the new Telis1RTS.
5.2.1 Identifying the model
Check that the original control point has an elongated button. Bring the product to the midway position. Remove the front cover from the onetouch point:
One-touch point with a white and grey front cover
Gently remove the front cover with a flat, pointed tool (such as a flathead screwdriver) where the white section and the grey section join. Lever it, without using force, to detach the mounting lugs from the front cover.
One-touch point with a white front cover
Lever the front cover with a flat, pointed tool (such as a flathead screwdriver), without using force, around the upper section of the front cover to detach it from its mounting.
Turn the front cover over to find out the model: - If there is a metal plate (a) inscribed PROG next to the battery: model A. - If there is no metal plate inscribed PROG next to the battery: model B.
5.2.2 Adding the Telis 1 RTS

ModelA:

Make a contact between the PROG metal plate (a) on the electrical circuit and the battery bracket using a flathead screwdriver, until the product moves briefly (or there is a series of 3beeps): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original control point must be deleted, go to paragraph 5.2.3 "Deleting an original control point". If the original control point is to be kept, refit the front cover:

Insert the mounting lugs into their notches on one side of the front cover. Press on the other side until it clicks, to fix the front cover in its bracket.
Telis 1 RTS One-touch point with a white front cover
Refit the front cover on its bracket

ModelB:

Remove the battery from the original control point using a plastic object. Press on the centre section of the onetouch point button. Refit the battery in the base of its bracket (with text legible). Press the button again until the product moves briefly (or there is a series of 3beeps): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original control point must be deleted, go to paragraph 5.2.3 "Deleting an original control point". If the original control point is to be kept, refit the front cover:
Telis 1 RTS One-touch point with a white and grey front cover
5.2.3 Deleting an original control point (optional)
Recommended: Only follow this procedure if use of the original control point is no longer required.
Wait 5 minutes. Take the new Telis 1 RTS and turn it over to access the PROG button (E). Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. On the original control point, make a contact between the PROG metal plate (a) on the electrical circuit and the battery bracket using a flathead screwdriver: the product will move briefly (or emit a series of 8beeps) to indicate that the original control point is deleted. Press the one-touch point button: the product does not move. Press the down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact
the Somfy assistance service. Remove the one-touch point. Do not dispose of the original control point with household waste, see paragraph 2.3.
Wait 5 minutes. Take the new Telis 1 RTS and turn it over to access the PROG button (E). - Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - Remove the battery from the original control point using a plastic object. - Press on the centre section of the onetouch point button. - Refit the battery in the base of its housing (with text legible). - Press the front panel button again: the product will move briefly (or emit a series of 8beeps) to indicate that the original control point is deleted. - Press the one-touch point button: the product does not move. - Press the down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. - Remove the one-touch point. Do not dispose of the original control point with household waste, see paragraph 2.3.

5.3 Point with Up/STOP/Down buttons
5.3.1 Checking the compatibility
Move close to the product to install the Telis1RTS. Bring the product to the midway position. - Cut off the mains power supply or detach the battery connected to the motor (eg for a battery operated roller blind). - Remove the front cover of the original control point: - Gently remove the front cover with a flat, pointed tool (such as a flathead screwdriver) where the white section and the grey section join. - Lever the front cover, without using force, to detach the mounting lugs from the front cover. - Turn the front cover over: the PROG button is located next to the battery(b). Caution! If after removing the front cover, no PROG button is found, this means that the control point is not compatible: the Telis 1 RTS cannot be linked to the product.
5.3.2 Adding the Telis 1 RTS
Switch the mains power supply back on or reconnect the battery to the motor. Press the PROGbutton (b) on the original control point until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over.
Press the PROG button (E) on the Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original control point must be deleted, go to paragraph 5.3.3 "Deleting an original control point". If the original control point is to be kept, refit the front cover: - Insert the mounting lugs into their notches on one side of the front cover. - Press on the other side until it clicks, to fix the front cover in its bracket.
5.3.3 Deleting an original control point (optional)
Recommended: Only follow this procedure if use of the original control point is no longer required. - Wait 5 minutes. - Take the new Telis 1 RTS and turn it over to access the PROG button (E). - Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - On the original control point, press the PROGbutton (b) briefly: the product will move briefly (or emit a series of

8beeps) to indicate that the original control point is deleted. - Press the Down button on the original control point: the product does not move. - Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. - Removing the original control point. Do not dispose of the original control point with household waste, see paragraph 2.3.

5.4 Timer

Move close to the product to install the Telis1RTS.
5.4.1 Checking the compatibility
Bring the product to the midway position. - Cut off the mains power supply or detach the battery connected to the motor (eg for a battery operated roller blind). - Remove the front cover of the original control point: - Lever it with a flat, pointed tool (such as a flathead screwdriver), without using force, around the upper section of the front cover to detach it from its mounting. - The PROG button is located on top of the screen and is shaped like a tab(c). Caution! If after removing the front cover, no PROG button is found, this means that the control point is not compatible: the Telis 1 RTS cannot be linked to the

product.

5.4.2 Adding the Telis 1 RTS
Switch the mains power supply back on or reconnect the battery to the motor. Press the tab (c) until the product moves briefly (or there is a series of 3beeps): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original control point must be deleted, go to paragraph 5.4.3 "Deleting an original control point". If the original control point is to be kept, refit the front cover: - Insert the front cover on its bracket, allowing the buttons to come through their housings. - Press the front until it clicks, to fix the front cover in its bracket.
5.4.3 Deleting an original control point (optional)
Recommended: Only follow this procedure if use of the original timer is no longer required. - Wait 5 minutes.
Take the new Telis 1 RTS and turn it over to access the PROG button (E). - Press the PROGbutton (E) on the Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - On the original timer, briefly press the tab(c): the product will move briefly (or emit a series of 8beeps) to indicate that the original control point is deleted. - Press the timer Down button: the product does not move. - Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. - Remove the timer. Do not dispose of the original control point with household waste, see paragraph 2.3.

5.5 Situo control point

5.5.1 Adding the Telis 1 RTS
Bring the product to the midway position. Remove the front cover from the Situo: - Gently remove the front cover with a flat, pointed tool (such as a flathead screwdriver) around the lower section. - Lever and lift the cover, without using force, to detach the mounting lugs from the front cover.
Turn the front cover over: the PROG button is located next to the battery(d). Press the PROGbutton (d) on the Situo until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the Situo must be deleted, go to paragraph 5.5.2 "Deleting the original Situo". If the Situo is to be kept, refit the front cover: - Insert the mounting lugs in their notches at the top. - Press the lower section until it clicks, to fix the front cover in its bracket.
5.5.2 Deleting the original Situo (optional)
Recommended: Only follow this procedure if use of the original Situo is no longer required. - Wait 5 minutes. - Take the new Telis 1 RTS and turn it over to access the PROG button (E).
Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - On the Situo, briefly press the PROG button(d): the product will make another brief movement (or emit a series of 8beeps) to indicate that the Situo is deleted. - Press the Situo Down button: the product does not move. - Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. - Remove the Situo. Do not dispose of the original control point with household waste, see paragraph 2.3.

5.6 Telis 1 RTS Telis Soliris RTS remote controls
The Telis 1 RTS has 1 indicator light (5a) and the Telis Soliris RTS has 2 indicator lights (5b). If the original remote control has more than 2 indicator lights, refer to the section "Telis 4 RTS/Telis 4 SolirisRTS remote controls". Move close to the product to install the Telis1RTS.
5.6.1 Adding a new Telis 1 RTS
Bring the product to the midway position. Turn the original Telis over: the PROG button (g) is located on the rear panel. Press the PROGbutton (g) with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original Telis must be deleted, go to paragraph 5.6.2 "Deleting the original Telis".
5.6.2 Deleting the original Telis (optional)
Recommended: Only follow this procedure if use of the original Telis is no longer required. Warning! Before deleting a Telis Soliris, contact the Somfy assistance service to check the compatibility of the control point with the product. - Wait 5 minutes. - Take the new Telis 1 RTS and turn it over to access the PROG button (E). - Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - Press the PROG button (g) on the original Telis briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the original Telis is deleted. - Press the Down button on the original Telis: the product does not move. - Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. Do not dispose of the original control point with household waste, see paragraph 2.3.
5.7 Telis 4 RTS/Telis 4 Soliris RTS remote controls
The Telis 4 RTS and Telis 4 Soliris RTS have 4 indicator lights. Move close to the product to install the Telis1RTS.
5.7.1 Adding a new Telis 1 RTS
On the original Telis, select the indicator light which controls the product only, with button(f). Bring the product to the midway position. Turn the original Telis over: the PROG button (g) is located on the rear panel. Press the PROGbutton (g) with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original Telis must be deleted, go to paragraph 5.7.2 "Deleting the original Telis".

5.7.2 Deleting the original Telis (optional)
Recommended: Only follow this procedure if use of the original Telis is no longer required. Warning! Before deleting a Telis Soliris, contact the Somfy assistance service to check the compatibility of the control point with the product. - Wait 5 minutes. - Take the new Telis 1 RTS and turn it over to access the PROG button (E). - Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - Select the indicator light which corresponds to the product only, on the original Telis, with button (f). - Press the PROG button (g) on the original Telis briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the original Telis is deleted. - On the original Telis, select the indicator light which controls the product only, with button(f). - Press the Down button on the original Telis: the product does not move. - Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. Do not dispose of the original control
point with household waste, see paragraph 2.3.
6. Replacing a lost or broken control point
If the original control point is lost or broken, there are two possible situations: the lost or broken control point is the only control point for the product, the lost or broken control point is not the only one which controls the product.
6.1 Sole control point lost or broken
Contact the Somfy assistance service so they can provide guidance for the replacement of the sole lost or broken control point.
6.2 One lost or broken control point amongst others
Find one of the control points linked to the product. Follow the steps described in the section "Adding the Telis 1 RTS" according to the control point model. N.B.: If, after having followed this operation, there is not a brief movement (or a series of beeps) the product, contact the Somfy assistance service so they can provide guidance for the replacement.

7. Mounting the bracket

Somfy advises that the Telis 1 RTS is installed in close proximity to the product to which it is linked, to avoid it having to perform any unnecessary searches. The minimum distance which must be kept between RTS enabled products is 30cm (eg 30cm between any RTS control points and/or between any control point and any motor). - Drill a hole. - Push in the plug (4). - Fix the bracket (3) with the screw (5). - Screw the mounting pin (2) on the bracket (3). - Hook the Telis 1 RTS (1) onto the mounting pin(2).
N.B.: Do not attach the Telis 1 RTS to a metal surface as metal can interfere with the radio signal.
8. Everyday use of the Telis 1 RTS

8.1 Up and Down buttons

Press the Up button (h): the product moves upwards/outwards and automatically stops in the raised/open position. - Press the Down button (i): the product moves downwards/inwards and automatically stops in the lowered/closed position. To move from the Up to the Down direction (and vice versa), it is not necessary to press the my button. The my button has two functions: - A STOP function: a brief press of the my button stops the product moving. - A my function: a brief press of the my button sends the product to the favourite position, if a favourite position has been stored and if the product is stationary. To find out more about the my function, visit Somfy's website at the following address: http://www.somfy.com/mysomfy/

8.2 My button

8.3 Replacing the battery
Environmental warning Do not dispose of the used battery with household waste, see paragraph 2.3. - Unscrew the rear casing of the Telis1RTS. - Push the battery out of its housing with a plastic object. - Insert a battery with identical specifications, the face marked with a plus (+) and with text legible. - Push the battery fully into its housing. - Screw the rear casing of the Telis1RTS back on. - Press a button on the front panel: if the indicator light comes on, the battery has been replaced correctly.

8.4 Maintenance

Clean the Telis 1 RTS with a damp cloth using multipurpose household or glass cleaning product. Never immerse or soak the Telis 1 RTS in any liquid.
9. Problems with the Telis 1 RTS?
Problem The product does not move after a button on the Telis 1 RTS is pressed. Possible causes The Telis 1 RTS is too far away from the product to be controlled. The Telis 1 RTS battery is weak. Solutions Move it closer to the product and press a button on the Telis 1 RTS again. If it still does not work, replace the battery. Replace the battery with a battery having identical specifications - see the paragraph: "Replacing the battery".
Problem The indicator light on the Telis 1 RTS does not come on. The product is raised when the Down button is pressed. The product is lowered when the Up button is pressed. The new Telis 1 RTS cannot be used even after following the procedure step by step. The motor does not move or emit any beeps. The Telis 1 RTS controls another product.

Possible causes The Telis 1 RTS battery is weak.
Solutions Replace the battery with a battery having identical specifications - see the paragraph: "Replacing the battery". Turn the Telis 1 RTS so that the indicator light is below the Up/my/Down buttons. Contact the Somfy assistance service. Contact the Somfy assistance service.
The Telis 1 RTS is held upside down. The original control point has a single button. The new telis 1 RTS was not linked successfully.
Contact the Somfy assistance service. A problem occurred whilst linking the Telis 1 RTS. Contact the Somfy assistance service.
For any unresolved questions or problems, please contact the Somfy assistance service in the number given on the back cover of these instructions

Where to find us

Australia Somfy PTY LTD Tel: +61 (0)0744 Website: www.somfy.com/au/index.cfm Canada Somfy ULC Tel: +1 (0) 6446 Website: www.somfy.com/nam/index. cfm?language=en-us United Kingdom Somfy LTD Tel: +44 (0) 3030 Website: www.somfy.co.uk/ United States of America Somfy Systems Inc. Tel: +1 (0) 1300 Website: www.somfy.com/nam/index. cfm?language=en-us
Somfy hereby declares that this product conforms to the essential requirements and other relevant provisions of Directive 1999/5/CE. A Declaration of Conformity is available at www.somfy.com/ce. For use in the European Union, the Swiss Confederation (Switzerland) and Norway.
Photos are not contractually binding
Somfy SAS, with capital of 20,000,000 Euros, RCS Bonneville 303.970.230 - 02/2008

doc1

INSTALLATIONguide

Telis 1 RTS / Telis 4 RTS
The Telis RTS (single or four channels) is a hand-held transmitter compatible with all the RTS receivers and the SL7070 range of products. Commands are transmitted by radio (frequency 433.42 MHz).

Ref.9 182192B

1 Programming 2
- Power: 3V lithium battery, CR 2430 type - Protection index: IP 30 - Operating temperature: +5C to +40C - Class III product - Normally polluted environment

Characteristics :

Hereby, SOMFY, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity is available at the web address www.somfy.com Heading CE
A INITIAL INSTALLATION WITH AN ACCESSIBLE RTS RECEIVER

On the RTS receiver

Press the PROG button untill its LED lights. This indicates that for one minute the RTS receiver is ready to receive the address of the transmitter. After this time limit, the LED goes out.
On the Telis RTS transmitter
Single channel transmitter : Press the programming button on the backside of the transmitter with a ball-point pen until the RTS receivers LED blinks. The address of the transmitter is memorized by the RTS receiver which automatically quits its programming mode.
Four channels transmitter : Select the channel you wish to memorize in the RTS receiver by pressing the button on the front of the transmitter. the corresponding LED is blinking during 3 seconds (the channel is still memorized for 30s). Press the programming button on the backside of the transmitter with a ball-point pen until the motor module LED blinks. The address of the transmitter is memorized by the RTS receiver which automatically quits its programming mode. Repeat the same procedure for each channel you wish to assign in a RTS receiver memory, especially the general channel (when the four LEDs are blinking).
Memory capacity of a motor module : 16 channels maximum
You cannot assign more than 16 channels to a RTS receiver. If you try to enter a 17th, your instruction will be ignored, the receivers led goes out.
B EXISTING INSTALLATION WITH A NON ACCESSIBLE RTS RECEIVER
On a control already memorized in the RTS receiver
Press more than 2s the programming button on this control with a ball-point pen : the LED of the control flashes, indicating that the motor modules which have the adress of this control are in their programming mode for one minute.
Repeat the same procedure described in the chapter A. Single channel transmitter : Press the programming button on the backside of the transmitter. Four channels transmitter : Select the channel you wish to memorize in the RTS receiver. Press the programming button on the backside of the transmitter.
C DELETE A CHANNEL FROM THE RTS RECEIVER MEMORY
To delete a channel of a transmitter from a RTS receiver, carry out the same procedure as described in chapter A : Set the RTS receiver in its programming mode, then select the channel you wish to delete on the transmitter and press the prog button of the transmitter (the concerned channel will be unprogrammed from the RTS receivers memory).
Non-binding document. Products and references in this document are subject to change without prior notice. Please consult SOMFY before using such references. SOMFY 10/98
D ERASE THE MEMORY OF A RTS RECEIVER
Press the module programming button for approximately 10 seconds until the LED flashes.

Using :

Telis 1 RTS : Single channel transmitter : Press the UP ; DOWN or STOP button. the programmed RTS receivers are activated. Telis 4 RTS : Four channels transmitter : Select the channel of the motor module you wish to control. the corresponding LED is blinking during 3 seconds (the channel is still memorized for 30s and then the transmitter returns to channel 1). Press the UP ; DOWN or STOP button. the programmed RTS receivers are activated.

Battery life The transmitters are fitted with a 3V battery (type 2430) which provides about 3 years operation assuming 4 operations per day. When the battery becomes discharged, the control LED no longer lights up when a command is sent, and the command is not carried out. The module has an integrated backup control under the programming button ( see page 1). It operates by successive presses: raising, stop, lowering, stop. How to change the battery Remove the back cover of the transmitter with a screwdriver. Slide the battery out of its house by pushing it with a screwdriver. Insert the new battery.
Rem : Do not throw the empty battery anyway (put it in a special expected place).
F D K TERY BAT LITHIUM 2430 CR 3V

 

Tags

Expressmusic VPC-J1EX DMR-E85 Rally 2005 LE-40R72B PF4450 MDR-RF925R Coolscan 9000 UR5U-8520 SF-370-XEU DJM-350 0 PE RGE300 4500DN Doro 522 SX-303RDS TX-21JTP3 TX-850 Simba 202 Multi-piattaforma 2 MRV-F545 VSR-2900 Dimage X20 3 5 DE1102 Vpointhd DEH-P7100BT F CUV4XD Breadmaker RX-V390 Fisheasy 2 640 642C ASF65020 TSI 200 Nexstar GPS WV-ST1 Caesar II Lide 100 UE-32C6500UW Aqxd 129 Dc-nikkor Cirkelsag PV-GS19 LN40C610 Safari MP-F 596 S36AW Digitech RP7 Urc-3451 PW191 EN116 Bulldog Plus A3380 Tough-6000 MK79G1394 XC1000 UE-32C6620 ECM20 EC470W XS-L151p5 Wtmc352SUC RT-56NZ23RB FBQ6200 Supernova Plus Classic 110 FAX-L2000 Transformers KDC-W5041uaug Review MP303 WV-H4 RC-591 Nnct559W TCP42G25 EX530 FAX-B840 KDL-40V2500 KX-FP151GRW MS9027C 29PT5408 W2252S-PF Autoloader Z1300 Bearytales G-707 DP8821 Dvdr80 SAP-ZK22X Macintosh DT 290 EWH-200R Canon ZR40 FX-400 PRO HP102E HL-4070CDW PCG-Z1XEP 350 A1 ANT2409 PW-AT790 LP350

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101