www.somfy.com

Telis 1 RTS
Operating and installation guide

Ref. 5054463A

Contents
1. Brief introduction to the Telis 1 RTS remote control 1.1 What is the Telis 1 RTS for? 1.2 A few definitions 2. Safety - Important information 2.1 Installation and commissioning 2.2 Operating 2.3 Environment 3. Content of the kit and tools required 3.1 List of parts 3.2 Tools required 4. The Telis 1 RTS in detail 4.1 Components 4.2 Technical data 5. Adding a new Telis 1 RTS 5.1 Identifying the original control point 5.2 One-touch point 5.3 Point with Up/STOP/Down buttons 5.4 Timer 5.5 Situo control point 5.6 Telis 1 RTS Telis Soliris RTS remote controls 5.7 Telis 4 RTS/Telis 4 Soliris RTS remote controls 6. Replacing a lost or broken control point 6.1 Sole control point lost or broken 6.2 One lost or broken control point amongst others 7. Mounting the bracket 8. Everyday use of the Telis 1 RTS 8.1 Up and Down buttons 8.2 My button 8.3 Replacing the battery 8.4 Maintenance 9. Problems with the Telis 1 RTS? 3 4
Copyright 2008 Somfy SAS. All rights reserved.
Somfy's expertise delivers satisfaction guaranteed.
Thank you for choosing a Somfy Telis 1 RTS. Before installing and using the Telis 1 RTS, please read this guide carefully. Somfy solutions animate your windows and entrances to bring your whole house alive. Somfy solutions are designed so that everyone can enjoy the benefits of the products in their home, based on their specific requirements. In this guide, the term product can include your awning, blind, curtain, garage door, gate, projection screen, roller shutter. Well thought-out and easy to use, Somfy solutions are one of lifes little daily pleasures, making home life more enjoyable.
1. Brief introduction to the Telis 1 RTS remote control
These instructions describe the installation steps required to make the best use of the Telis 1 RTS. Advanced installation functions are available on our website (address on the back cover of these instructions).
1.1 What is the Telis 1 RTS for?
The Telis 1 RTS is a wireless radio remote control compatible only with products fitted with Radio Technology Somfy (RTS): The Telis 1 RTS is used: As an individual control to control a single product (eg roller blind) at a time. As a group control to command several products at the same time (eg several roller blinds) (advanced installation function).

1.2 A few definitions

Installation All of the Radio Technology Somfy products a house is equipped with. Favourite position The favourite position is your ideal position for your product in certain
common situations, for example, your curtains or blinds partially closed to shield the TV from afternoon sunlight; your awning partially extended when you are dining beneath it in summer but dont want to deprive your houseplants of sunlight
2. Safety - Important information
2.1 Installation and commissioning
Before installing and using the Telis 1 RTS, please read these instructions carefully, which describe how to install, commission and operate the Telis 1 RTS. Never begin installing without first checking the compatibility of the Telis 1 RTS with the associated equipment and accessories. Any incorrect use will invalidate the warranty and Somfys liability.

2.2 Operating

Somfy recommends that at least one control point is located close to the product or group of products. Do not allow children to play with the fixed control points. Keep remote controls out of the reach of children. Monitor the product (especially roller shutter/awning/garage door/gate) while it is moving, especially during commissioning of the Telis 1 RTS, and keep people at a distance until the product is completely closed. Switch off the circuit breaker corresponding to the roller shutter/awning/ garage door/gate before any maintenance operation in the vicinity of the product (for example, when cleaning windows near your awning). Avoid moving the roller shutter/awning if ice has formed in it, unless the motor is fitted with anti-freeze protection. Do not leave the Telis 1 RTS behind a window in full sunlight as it cannot withstand temperatures greater than 60C. Do not leave the Telis 1 RTS in a car in winter. Do not immerse or soak the Telis 1 RTS in any liquid. Only use cleaning products recommended by Somfy. Frequently check the product (eg awning) to detect any defects in balance or any signs of wear. Do not use the product if a repair or adjustment is required

2.3 Environment

Damaged electrical or electronic products, such as used batteries,
should not be disposed of with household waste. Please take them to a collection point or an approved centre to ensure they are recycled correctly.
3. Content of the kit and tools required

3.1 List of parts

Before starting installation and commissioning of the Telis 1 RTS, check that all parts listed in the table below are present in the correct quantity (Q): 4 No. Components Q. Telis 1 RTS remote control 1 3
Mounting pin Support Plug Screw 1 1

3.2 Tools required

Phillips screwdriver Insulated flathead screwdriver Drill and drill bit Pencil

electricians

4. The Telis 1 RTS in detail

4.1 Components

A. Up button B. STOP/my button C. Down button D. Indicator light E. PROG button

mysomfy.com

4.2 Technical data
Dimensions in mm (Height x Width x Depth): Pure model: 134 x 41 x 21 mm Lounge, Silver, Patio models: 145 x 49 x 22 mm Operating temperature: 0C to + 60C Protection rating: Inside use, in a dry room - IP 30 (Pure, Lounge, Silver Models) ; IP 44 (Patio Model) Frequency: 433.42 MHz Range: 20 m through two concrete walls; 200 m in an open area Battery: 3 V, type CR 2430

5. Adding a new Telis 1 RTS
5.1 Identifying the original control point
5.1.1 Installation recommendations
To add a Telis 1 RTS, use the control point linked to the product which controls only this product: pressing the Down or Up button only causes movement of the product to which the new Telis 1 RTS must be connected. Caution! If there is no longer a control point linked to the product (all the control points are broken or have been lost), contact the Somfy assistance service. N.B.: These instructions only describe the installation procedure for an additional Telis 1 RTS of the individual control type. Refer to the instructions for advanced functions available on the Internet (address on the back cover of these instructions) to install a control referred to as group control. - On some products, inputs in programming mode and the addition or deletion of a control point are signalled by a series of beeps emitted
by the motor. On other products, this is signalled by a brief movement of the product. Caution: If the product does not emit a beep or make a brief movement, please contact the Somfy assistance service. - Place the product in the midway position before installing the new Telis 1 RTS so that the movements can be easily seen.
5.1.2 Original control points
Find the original control point in the list below and refer to the paragraph given to add the new Telis 1 RTS: 1) Control point fixed to the wall with a single button, called a One-touch point, see paragraph 5.2; 2) Control point fixed to the wall with Up/STOP/Down buttons, called a Point with Up/STOP/Down buttons, see paragraph 5.3; 3) Programmer type control point, called a Timer, see paragraph 5.4; 4) Situo control point fixed to the wall, see paragraph 5.5; 5a) Telis 1 RTS remote control, see paragraph 5.6; 5b) Telis Soliris RTS remote control, see paragraph 5.6; 6a) Telis 4 RTS remote control, see paragraph5.7; 6b) Telis 4 Soliris RTS remote control, see paragraph5.7.

5.2 One-touch point

Move close to the product to install the new Telis1RTS.
5.2.1 Identifying the model
Check that the original control point has an elongated button. Bring the product to the midway position. Remove the front cover from the onetouch point:
One-touch point with a white and grey front cover

Gently remove the front cover with a flat, pointed tool (such as a flathead screwdriver) where the white section and the grey section join. Lever it, without using force, to detach the mounting lugs from the front cover.
One-touch point with a white front cover
Lever the front cover with a flat, pointed tool (such as a flathead screwdriver), without using force, around the upper section of the front cover to detach it from its mounting.
Turn the front cover over to find out the model: - If there is a metal plate (a) inscribed PROG next to the battery: model A. - If there is no metal plate inscribed PROG next to the battery: model B.
5.2.2 Adding the Telis 1 RTS

ModelA:

Make a contact between the PROG metal plate (a) on the electrical circuit and the battery bracket using a flathead screwdriver, until the product moves briefly (or there is a series of 3beeps): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original control point must be deleted, go to paragraph 5.2.3 "Deleting an original control point". If the original control point is to be kept, refit the front cover:
Insert the mounting lugs into their notches on one side of the front cover. Press on the other side until it clicks, to fix the front cover in its bracket.
Telis 1 RTS One-touch point with a white front cover
Refit the front cover on its bracket

ModelB:

Remove the battery from the original control point using a plastic object. Press on the centre section of the onetouch point button. Refit the battery in the base of its bracket (with text legible). Press the button again until the product moves briefly (or there is a series of 3beeps): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original control point must be deleted, go to paragraph 5.2.3 "Deleting an original control point". If the original control point is to be kept, refit the front cover:

Telis 1 RTS One-touch point with a white and grey front cover
5.2.3 Deleting an original control point (optional)
Recommended: Only follow this procedure if use of the original control point is no longer required.
Wait 5 minutes. Take the new Telis 1 RTS and turn it over to access the PROG button (E). Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. On the original control point, make a contact between the PROG metal plate (a) on the electrical circuit and the battery bracket using a flathead screwdriver: the product will move briefly (or emit a series of 8beeps) to indicate that the original control point is deleted. Press the one-touch point button: the product does not move. Press the down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact
the Somfy assistance service. Remove the one-touch point. Do not dispose of the original control point with household waste, see paragraph 2.3.
Wait 5 minutes. Take the new Telis 1 RTS and turn it over to access the PROG button (E). - Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - Remove the battery from the original control point using a plastic object. - Press on the centre section of the onetouch point button. - Refit the battery in the base of its housing (with text legible). - Press the front panel button again: the product will move briefly (or emit a series of 8beeps) to indicate that the original control point is deleted. - Press the one-touch point button: the product does not move. - Press the down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. - Remove the one-touch point. Do not dispose of the original control point with household waste, see paragraph 2.3.
5.3 Point with Up/STOP/Down buttons
5.3.1 Checking the compatibility
Move close to the product to install the Telis1RTS. Bring the product to the midway position. - Cut off the mains power supply or detach the battery connected to the motor (eg for a battery operated roller blind). - Remove the front cover of the original control point: - Gently remove the front cover with a flat, pointed tool (such as a flathead screwdriver) where the white section and the grey section join. - Lever the front cover, without using force, to detach the mounting lugs from the front cover. - Turn the front cover over: the PROG button is located next to the battery(b). Caution! If after removing the front cover, no PROG button is found, this means that the control point is not compatible: the Telis 1 RTS cannot be linked to the product.

5.3.2 Adding the Telis 1 RTS
Switch the mains power supply back on or reconnect the battery to the motor. Press the PROGbutton (b) on the original control point until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over.
Press the PROG button (E) on the Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original control point must be deleted, go to paragraph 5.3.3 "Deleting an original control point". If the original control point is to be kept, refit the front cover: - Insert the mounting lugs into their notches on one side of the front cover. - Press on the other side until it clicks, to fix the front cover in its bracket.
5.3.3 Deleting an original control point (optional)
Recommended: Only follow this procedure if use of the original control point is no longer required. - Wait 5 minutes. - Take the new Telis 1 RTS and turn it over to access the PROG button (E). - Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - On the original control point, press the PROGbutton (b) briefly: the product will move briefly (or emit a series of
8beeps) to indicate that the original control point is deleted. - Press the Down button on the original control point: the product does not move. - Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. - Removing the original control point. Do not dispose of the original control point with household waste, see paragraph 2.3.

5.4 Timer

Move close to the product to install the Telis1RTS.
5.4.1 Checking the compatibility
Bring the product to the midway position. - Cut off the mains power supply or detach the battery connected to the motor (eg for a battery operated roller blind). - Remove the front cover of the original control point: - Lever it with a flat, pointed tool (such as a flathead screwdriver), without using force, around the upper section of the front cover to detach it from its mounting. - The PROG button is located on top of the screen and is shaped like a tab(c). Caution! If after removing the front cover, no PROG button is found, this means that the control point is not compatible: the Telis 1 RTS cannot be linked to the

product.

5.4.2 Adding the Telis 1 RTS
Switch the mains power supply back on or reconnect the battery to the motor. Press the tab (c) until the product moves briefly (or there is a series of 3beeps): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original control point must be deleted, go to paragraph 5.4.3 "Deleting an original control point". If the original control point is to be kept, refit the front cover: - Insert the front cover on its bracket, allowing the buttons to come through their housings. - Press the front until it clicks, to fix the front cover in its bracket.
5.4.3 Deleting an original control point (optional)
Recommended: Only follow this procedure if use of the original timer is no longer required. - Wait 5 minutes.
Take the new Telis 1 RTS and turn it over to access the PROG button (E). - Press the PROGbutton (E) on the Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - On the original timer, briefly press the tab(c): the product will move briefly (or emit a series of 8beeps) to indicate that the original control point is deleted. - Press the timer Down button: the product does not move. - Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. - Remove the timer. Do not dispose of the original control point with household waste, see paragraph 2.3.

5.5 Situo control point

5.5.1 Adding the Telis 1 RTS
Bring the product to the midway position. Remove the front cover from the Situo: - Gently remove the front cover with a flat, pointed tool (such as a flathead screwdriver) around the lower section. - Lever and lift the cover, without using force, to detach the mounting lugs from the front cover.
Turn the front cover over: the PROG button is located next to the battery(d). Press the PROGbutton (d) on the Situo until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the Situo must be deleted, go to paragraph 5.5.2 "Deleting the original Situo". If the Situo is to be kept, refit the front cover: - Insert the mounting lugs in their notches at the top. - Press the lower section until it clicks, to fix the front cover in its bracket.

5.5.2 Deleting the original Situo (optional)
Recommended: Only follow this procedure if use of the original Situo is no longer required. - Wait 5 minutes. - Take the new Telis 1 RTS and turn it over to access the PROG button (E).
Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - On the Situo, briefly press the PROG button(d): the product will make another brief movement (or emit a series of 8beeps) to indicate that the Situo is deleted. - Press the Situo Down button: the product does not move. - Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. - Remove the Situo. Do not dispose of the original control point with household waste, see paragraph 2.3.
5.6 Telis 1 RTS Telis Soliris RTS remote controls
The Telis 1 RTS has 1 indicator light (5a) and the Telis Soliris RTS has 2 indicator lights (5b). If the original remote control has more than 2 indicator lights, refer to the section "Telis 4 RTS/Telis 4 SolirisRTS remote controls". Move close to the product to install the Telis1RTS.
5.6.1 Adding a new Telis 1 RTS
Bring the product to the midway position. Turn the original Telis over: the PROG button (g) is located on the rear panel. Press the PROGbutton (g) with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original Telis must be deleted, go to paragraph 5.6.2 "Deleting the original Telis".

5.6.2 Deleting the original Telis (optional)
Recommended: Only follow this procedure if use of the original Telis is no longer required. Warning! Before deleting a Telis Soliris, contact the Somfy assistance service to check the compatibility of the control point with the product. - Wait 5 minutes. - Take the new Telis 1 RTS and turn it over to access the PROG button (E). - Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - Press the PROG button (g) on the original Telis briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the original Telis is deleted. - Press the Down button on the original Telis: the product does not move. - Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. Do not dispose of the original control point with household waste, see paragraph 2.3.
5.7 Telis 4 RTS/Telis 4 Soliris RTS remote controls
The Telis 4 RTS and Telis 4 Soliris RTS have 4 indicator lights. Move close to the product to install the Telis1RTS.
5.7.1 Adding a new Telis 1 RTS
On the original Telis, select the indicator light which controls the product only, with button(f). Bring the product to the midway position. Turn the original Telis over: the PROG button (g) is located on the rear panel. Press the PROGbutton (g) with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. Take the new Telis 1 RTS and turn it over. Press the PROG button (E) on the new Telis 1 RTS briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 1 RTS is stored. Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. If the original Telis must be deleted, go to paragraph 5.7.2 "Deleting the original Telis".
5.7.2 Deleting the original Telis (optional)
Recommended: Only follow this procedure if use of the original Telis is no longer required. Warning! Before deleting a Telis Soliris, contact the Somfy assistance service to check the compatibility of the control point with the product. - Wait 5 minutes. - Take the new Telis 1 RTS and turn it over to access the PROG button (E). - Press the PROGbutton (E) on the new Telis 1 RTS with the tip of a pencil until the product moves briefly (or a series of 3beeps is emitted): the programming function of your RTS enabled products is activated for approximately 2 minutes. - Select the indicator light which corresponds to the product only, on the original Telis, with button (f). - Press the PROG button (g) on the original Telis briefly with the tip of a pencil: the product will make another brief movement (or emit a series of 8beeps) to indicate that the original Telis is deleted. - On the original Telis, select the indicator light which controls the product only, with button(f). - Press the Down button on the original Telis: the product does not move. - Press the Down button on the new Telis 1 RTS: - If the product is lowered, the Telis1RTS is operational. - If the product does not move, contact the Somfy assistance service. Do not dispose of the original control

point with household waste, see paragraph 2.3.
6. Replacing a lost or broken control point
If the original control point is lost or broken, there are two possible situations: the lost or broken control point is the only control point for the product, the lost or broken control point is not the only one which controls the product.
6.1 Sole control point lost or broken
Contact the Somfy assistance service so they can provide guidance for the replacement of the sole lost or broken control point.
6.2 One lost or broken control point amongst others
Find one of the control points linked to the product. Follow the steps described in the section "Adding the Telis 1 RTS" according to the control point model. N.B.: If, after having followed this operation, there is not a brief movement (or a series of beeps) the product, contact the Somfy assistance service so they can provide guidance for the replacement.

7. Mounting the bracket

Somfy advises that the Telis 1 RTS is installed in close proximity to the product to which it is linked, to avoid it having to perform any unnecessary searches. The minimum distance which must be kept between RTS enabled products is 30cm (eg 30cm between any RTS control points and/or between any control point and any motor). - Drill a hole. - Push in the plug (4). - Fix the bracket (3) with the screw (5). - Screw the mounting pin (2) on the bracket (3). - Hook the Telis 1 RTS (1) onto the mounting pin(2).
N.B.: Do not attach the Telis 1 RTS to a metal surface as metal can interfere with the radio signal.
8. Everyday use of the Telis 1 RTS

8.1 Up and Down buttons

Press the Up button (h): the product moves upwards/outwards and automatically stops in the raised/open position. - Press the Down button (i): the product moves downwards/inwards and automatically stops in the lowered/closed position. To move from the Up to the Down direction (and vice versa), it is not necessary to press the my button. The my button has two functions: - A STOP function: a brief press of the my button stops the product moving. - A my function: a brief press of the my button sends the product to the favourite position, if a favourite position has been stored and if the product is stationary. To find out more about the my function, visit Somfy's website at the following address: http://www.somfy.com/mysomfy/

8.2 My button

8.3 Replacing the battery
Environmental warning Do not dispose of the used battery with household waste, see paragraph 2.3. - Unscrew the rear casing of the Telis1RTS. - Push the battery out of its housing with a plastic object. - Insert a battery with identical specifications, the face marked with a plus (+) and with text legible. - Push the battery fully into its housing. - Screw the rear casing of the Telis1RTS back on. - Press a button on the front panel: if the indicator light comes on, the battery has been replaced correctly.

8.4 Maintenance

Clean the Telis 1 RTS with a damp cloth using multipurpose household or glass cleaning product. Never immerse or soak the Telis 1 RTS in any liquid.
9. Problems with the Telis 1 RTS?
Problem The product does not move after a button on the Telis 1 RTS is pressed. Possible causes The Telis 1 RTS is too far away from the product to be controlled. The Telis 1 RTS battery is weak. Solutions Move it closer to the product and press a button on the Telis 1 RTS again. If it still does not work, replace the battery. Replace the battery with a battery having identical specifications - see the paragraph: "Replacing the battery".
Problem The indicator light on the Telis 1 RTS does not come on. The product is raised when the Down button is pressed. The product is lowered when the Up button is pressed. The new Telis 1 RTS cannot be used even after following the procedure step by step. The motor does not move or emit any beeps. The Telis 1 RTS controls another product.
Possible causes The Telis 1 RTS battery is weak.
Solutions Replace the battery with a battery having identical specifications - see the paragraph: "Replacing the battery". Turn the Telis 1 RTS so that the indicator light is below the Up/my/Down buttons. Contact the Somfy assistance service. Contact the Somfy assistance service.
The Telis 1 RTS is held upside down. The original control point has a single button. The new telis 1 RTS was not linked successfully.
Contact the Somfy assistance service. A problem occurred whilst linking the Telis 1 RTS. Contact the Somfy assistance service.
For any unresolved questions or problems, please contact the Somfy assistance service in the number given on the back cover of these instructions

Where to find us

Australia Somfy PTY LTD Tel: +61 (0)0744 Website: www.somfy.com/au/index.cfm Canada Somfy ULC Tel: +1 (0) 6446 Website: www.somfy.com/nam/index. cfm?language=en-us United Kingdom Somfy LTD Tel: +44 (0) 3030 Website: www.somfy.co.uk/ United States of America Somfy Systems Inc. Tel: +1 (0) 1300 Website: www.somfy.com/nam/index. cfm?language=en-us
Somfy hereby declares that this product conforms to the essential requirements and other relevant provisions of Directive 1999/5/CE. A Declaration of Conformity is available at www.somfy.com/ce. For use in the European Union, the Swiss Confederation (Switzerland) and Norway.
Photos are not contractually binding
Somfy SAS, with capital of 20,000,000 Euros, RCS Bonneville 303.970.230 - 02/2008

www.somfy.com

Telis 4 Soliris RTS
Operating and installation guide

Ref.5054466A

1.Brief introduction to the Telis 4 Soliris RTS remote control 1.1 What is the Telis 4 Soliris RTSfor? 1.2 A few definitions 2. Safety - Important information 2.1 Installation and commissioning 2.2 Operating 2.3 Environment 3. Content of the kit and tools required 3.1 List of parts 3.2 Tools required 4. Details of the Telis 4 Soliris RTS 4.1 Components 4.2 Technical data 5. How does the Telis 4 Soliris RTS operate? 5.1 Channels and indicator lights 5.2 Choice of products to be controlled 6. Adding a new Telis 4 Soliris RTS 6.1 Identifying the original control point 6.2 One-touch point 6.3 oint with Up/STOP/Down buttons P 6.4 Timer 6.5 Situo control point 6.6 elis 1 RTS/Telis Soliris RTS remote controls T 6.7 elis 4 RTS/Telis 4 Soliris RTS remote controls T 7. Replacing a lost or broken control point 7.1 Sole control point lost or broken 7.2 ne lost or broken control point amongst others O 8. Mounting the bracket 9. Everyday use of the Telis 4 Soliris RTS 9.1 Channel selection 9.2 p and Down buttons U 9.3 My button 9.4 Sun function 9.5 Replacing the battery 9.6 Maintenance 10. Problems with the Telis 4 Soliris RTS?

Contents

Copyright 2008 Somfy SAS. All rights reserved.
Somfys expertise delivers satisfaction guaranteed.
Thank you for choosing a Somfy Telis 4 Soliris RTS. Before installing and using the Telis 4 Soliris RTS, please read this guide carefully. Somfy solutions animate your windows and entrances to bring your whole house alive. Somfy solutions are designed so that everyone can enjoy the benefits of the products in their home, based on their specific requirements. In this guide, the term product can include your awning, blind, curtain, garage door, gate, projection screen, roller shutter. Well thought-out and easy to use, Somfy solutions are one of lifes little daily pleasures, making home life more enjoyable.
1.Brief introduction to the Telis 4 Soliris RTS remote control
This guide describes the installation steps required to make the best use of the Telis 4 Soliris RTS.
1.1 What is the Telis 4 Soliris RTSfor?
The Telis 4 Soliris RTS is a wireless radio remote control compatible only with products fitted with Somfy Radio Technology (RTS): roller shutter motors, awning motors, etc. The Telis 4 Soliris RTS makes it possible to control several products individually using a single remote control handset, by means of a 5-channel radio system, each channel being identified by the indicator lights. Several products can also be controlled at once using the Telis 4 Soliris RTS. The Telis 4 Soliris RTS also enables products linked to its fifth channel to be set to Wind and Sun mode. In Wind and Sun mode, the relevant products react automatically to variations in sunshine, provided they are linked to a Sun sensor or a Wind and Sun sensor.

1.2 A few definitions

Installation: All of the Radio Technology Somfy products a house is equipped with. Favourite position: The favourite position is your ideal position for your roller shutter or awning in certain situations, for example, your awning partially extended when you are dining beneath it in summer but dont want to deprive your houseplants of sunlight; shading your computer screen from glare by partially closing your interior window blinds/curtains etc.
2. Safety - Important information
2.1 Installation and commissioning
Before installing and using the Telis 4 Soliris RTS, please read these instructions carefully. These describe how to install, commission and operate the Telis 4 Soliris RTS. Never begin installing without first checking the compatibility of the Telis 4 Soliris RTS with the linked equipment and accessories. Any incorrect use will invalidate the warranty and Somfy's liability.

2.2 Operating

-- Somfy
recommends that at least one control point is located close to the product or group of products. -- Do not allow children to play with the fixed control points. Keep remote controls out of the reach of children. -- Monitor the product while it is moving, especially during commissioning of the Telis 4 Soliris RTS, and keep people at a distance until the product is completely closed. -- Make sure the power supply to the product is turned off before any maintenance operation in the vicinity of the product (for example, when cleaning windows near your awning). -- Avoid moving the product if ice has formed in it, unless the motor is fitted with antifreeze protection. -- Do not leave the product behind a window in full sunlight, as the Telis 4 Soliris RTS cannot withstand temperatures greater than 60C. -- Do not leave the Telis 4 Soliris RTS in a car in winter. -- Do not immerse or soak the Telis 4 Soliris RTS in any liquid.

-- Only

-- Frequently
use maintenance products recommended by Somfy. check the product (e.g. awning) to detect any defects in balance or any signs of wear. Do not use the product if a repair or adjustment is required.

2.3 Environment

Damaged electrical or electronic products, such as used batteries, should not be disposed of with household waste. Please take them to a collection point or an approved centre to ensure they are recycled correctly.
3. Content of the kit and tools required

3.1 List of parts

-- Before
starting installation and commissioning of the Telis 4 Soliris RTS, check that all parts listed in the table below are present in the correct quantity (Q):
Components Telis 4 Soliris RTS remote control Mounting pin Bracket Plug Screw Identification label Q. 1 1

No. 5 6

3.2 Tools required
Appropriate screwdriver for the screws to be used nsulated flathead electrician's I screwdriver Drill and drill bit Pencil
4. Details of the Telis 4 Soliris RTS

4.1 Components

A. Up button B. STOP/my button C. Down button D. Indicator lights E. Selection Button F. Programming button (PROG)

C D E F

mysomfy.com

4.2 Technical data

Dimensions in mm (H x w x d): 145 x 49 x 22 mm Operating temperature: 0C to + 60C Protection ratingIP 44: Rain resistant and shock resistant Frequency: 433.42 MHz Range: 20 m through two concrete walls; 200 m in open space Battery: 3 V type CR 2430.
5. How does the Telis 4 Soliris RTS operate?
5.1 Channels and indicator lights

5.1.1 Description

The Telis 4 Soliris RTS allows independent or simultaneous control of different products with a single remote control unit. This functionality is possible thanks to a 5-channel system, identified by indicator lights: each indicator light corresponds to an individual channel. Each channel is independent and controls a product or group of products. The amount of sun the house receives can also be adjusted using Channel 5, by selecting the Sun function: if a Sun sensor or a Wind and Sun sensor is linked to the products controlled by Channel 5, the sensor will automatically control the lowering or raising of the products, depending on the intensity of the ambient light. The Selection button (E) is used to navigate between the 5 channels and
to activate the Wind and Sun function.
5.1.2 Channel identification
The first 4 channels are each represented by an indicator light, the fifth channel by all 4 indicator lights: Channel 1: the first indicator light is on, Channel 2: the second indicator light is on, Channel 3: the third indicator light is on, Channel 4: the fourth indicator light is on, Channel 5: all four indicator lights are on.

Channel 1: Channel 2: Channel 3: Channel 4: Channel 5:

5.1.3 Channel selection

The Selection button (E) allows navigation between the 5 channels: -- Press the Selection button (E) to select the indicator light, or the four indicator lights, that correspond to the required channel, that is the channel for the product to be controlled: T he indicator light(s) will come on for a few seconds and then turn off. one of the three buttons, Up/ STOP/Down to control the operations. Caution: the Telis 4 Soliris RTS will store the last channel activated. Press the Selection button (E), the indicator light of the last channel used will light up.

-- Press

5.1.4 The Wind and Sun function
The Selection button (E) also enables the Wind and Sun function to be activated for the products controlled by Channel 5: Wind function: the products react to the wind. Wind and Sun function the products react to the wind and the sun. -- Press the Selection button (E) to select Channel 5: he four indicator lights will come T on for a few seconds and then turn off.

Wind function:

Wind and Sun function:
the Selection button (E) again and keep it pressed until two indicator lights come on: -- If the two Wind indicator lights are on: the Wind function is active. -- If the two Wind/Sun indicator lights are on: the Wind and Sun function is active.
5.1.4.1 Selecting the Wind and Sun function
To change from the Wind function to the Wind and Sun function: -- Select channel 5. -- Press the Selection button (E) again and keep it pressed: he two Wind indicator lights T will go out and the two Wind/Sun indicator lights will come on; the roller shutter / awnings allocatted to channel 5 move briefly.

-- Release

the Selection button (E): the Wind and Sun function is active.
5.1.4.2 Selecting the Wind function
To change from the Wind and Sun function to the Wind function: -- Select channel 5. -- Press the Selection button (E) again and keep it pressed: he two Wind/Sun indicator lights T will go out and the two Wind indicator lights will come on; the roller shutter / awnings allocatted to channel 5 move briefly. the Selection button (E): the Sun function is no longer active. Caution: the products linked to channels 1, 2, 3 and 4 are still in Wind mode. The Wind function can only be activated if a Wind sensor or a Wind and Sun sensor is linked to the products. The Sun function can only be activated if a Sun sensor or a Wind and Sun sensor is linked to the products.

5.2 Choice of products to be controlled

5.2.1 Context of use

Caution: This section is illustrated with a specific example to explain the operation of the Telis 4 Soliris RTS and its channels. To simplify the explanations, we will use a total of 4 products controlled by the Telis 4 Soliris RTS in a typical house: Living room roller shutter No.1 called Living Room Shutter 1, Living room roller shutter No.2 called Living Room Shutter 2, Terrace awning No. 1 called Terrace Awning 1, Terrace awning No. 2 called Terrace Awning 2, Each of these products is fitted with an individual control point. The purpose of installing the Telis 4 Soliris RTS is to be able to control these 2roller shutters and 2 awnings independently but also on certain occasions, the 2 terrace awnings at the same time. In order to control these 2roller shutters and 2 awnings with the Telis 4 Soliris RTS, each roller shutter or awning must be allocated a channel and then the 2terrace awnings allocated to the fifth channel.
The 2 awnings allocated to channel 5 may therefore be controlled at the same time. They may also be allowed to react to the sun conditions if the Sun function is active (if a Sun sensor or a Wind and Sun sensor is allocated to these 2 awnings).
5.2.2 llocating a channel to a roller A shutter/awning
Caution: This step is to choose which channel to allocate to which product. It is not to make the allocation itself. -- Choosing which channel to link to which roller shutter or awning: Channel 1: Living Room Shutter 1 Channel 2: Living Room Shutter 2 Channel 3: Terrace Awning 1 Channel 4: Terrace Awning 2 Channel 5: the 2 awnings Terrace1 and 2. -- Add these names to the identification sticker. -- Apply the sticker to the back of the Telis 4 Soliris RTS as a guide.
5.2.3 ow to link the Telis 4 Soliris H RTS to each shutter/awning
Caution: A channel is allocated to a shutter/ awning individually.
Living Room Shutter 1 on channel 1

-- Identify

Living Room 1 Living Room 2 Terrace 1 Terrace 2 Terrace 1 and 2
the original control point allocated to the Living Room shutter 1. -- Press the PROG button on the original control point (refer to the section Adding a new Telis 4 Soliris RTS) until the roller shutter moves briefly. -- Press the Selection button (E) to light up the first indicator light (channel 1).

-- Briefly

press the PROG button (F) located on the back of the Telis 4 Soliris RTS: T he roller shutter will perform a second brief movement to indicate that the new Telis 4 Soliris RTS is programmed.
Living Room Shutter 2 on channel 2
-- Identify the original control point alloca-- Press

6.1.1 Installation recommendations
6.1.2 Original control points

-- Find

the original control point in the list below and refer to the paragraph given to add the new Telis 4 Soliris RTS: 1) Control point fixed to the wall with a single button, called a One-touch point, see paragraph 6.2; 2) Control point fixed to the wall with Up/STOP/Down buttons, called a Point with Up/STOP/Down buttons, see paragraph 6.3; 3) Programmer type control point, called a Timer, see paragraph 6.4; 4) Situo control point fixed to the wall, see paragraph 6.5; 5a)Telis 1 RTS remote control, see paragraph 6.6; 5b)Telis Soliris RTS remote control, see paragraph 6.6; 6b)Telis 4 RTS remote control, see paragraph 6.7; 6b)Telis 4 Soliris RTS remote control, see paragraph 6.7;

6.2 One-touch point

Move close to the roller shutter/awning to install the new Telis 4 Soliris RTS.
6.2.1 Identifying the model

-- Check

that the original control point has an elongated button. -- Bring the roller shutter/awning to the midway position. -- Remove the front cover from the onetouch point:
-- Gently remove the front cover with a
One-touch point with a white and grey front cover
flat, pointed tool (such as a flathead screwdriver) where the white section and the grey section join.

-- Lever

it and lift the cover, without using force, to detach the mounting lugs from the front cover. it with a flat, pointed tool (such as a flathead screwdriver), without using force, around the upper section of the front cover to detach it from its mounting.
One-touch point with a white front cover

-- Turn

the front cover over to find out the model: -- If there is a metal plate inscribed PROG next to the battery: model A. -- If there is no metal plate inscribed PROG next to the battery: model B.
6.2.2 Adding the Telis 4 Soliris RTS

ModelA:

-- Make
a contact between the PROG metal plate on the electrical circuit and the battery bracket using a flathead screwdriver, until the roller shutter/ awning moves briefly (or there is a series of 3 beeps): the programming function is activated for approximately 2minutes. -- Take the new Telis 4 Soliris RTS. -- Press the Selection button (E) to light up the indicator light that corresponds to the channel to which the roller shutter/awning will be linked. -- Press the PROG button (F) on the new Telis 4 Soliris RTS briefly with the tip of a pencil: the roller shutter/awning will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 4 Soliris RTS is stored.

-- Press the Down button on the new Telis
4 Soliris RTS: -- If the roller shutter/awning is lowered, the Telis 4 Soliris RTS is operational. -- If the roller shutter/awning does not move, contact the Somfy assistance service. -- Replace the original control point front cover:

-- Insert

the mounting lugs into their notches on one side of the front cover. -- Press on the other side until it clicks, to fix the front cover in its bracket.

-- Refit

the front cover on its bracket.

ModelB:

the battery from the original control point using a plastic object. -- Press on the centre section of the onetouch point button. -- Refit the battery in the base of its bracket (with text legible). -- Press the button again until the roller shutter/awning moves briefly (or there is a series of 3 beeps): the programming function is activated for approximately 2minutes. -- Take the new Telis 4 Soliris RTS. -- Press the Selection button (E) to light up the indicator light that corresponds to the channel to which the roller shutter/awning will be linked.

-- Remove

the PROG button (F) on the new Telis 4 Soliris RTS briefly with the tip of a pencil: the roller shutter/awning will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 4 Soliris RTS is stored. -- Press the Down button on the new Telis 4 Soliris RTS: -- If the roller shutter/awning is lowered, the Telis 4 Soliris RTS is operational. -- If the roller shutter/awning does not move, contact the Somfy assistance service. -- Refitting the front cover:
One-touch point with a white and grey front cover:
One-touch point with a white front cover:
the front cover on its bracket
6.3 Point with Up/STOP/Down buttons
6.3.1 Checking the compatibility

-- Bring

Move close to the roller shutter/awning to install the Telis 4 Soliris RTS. the roller shutter/awning to the midway position. -- Cut off the mains power supply. -- Remove the front cover: -- Gently remove the front cover with a flat, pointed tool (such as a flathead screwdriver) where the white section and the grey section join. -- Lever it and lift the cover, without using force, to detach the mounting lugs from the front cover.

the front cover over: the PROG button is located next to the battery(b). Caution! If after removing the front cover, no PROG button is found, this means that the control point is not compatible: the Telis 4 Soliris RTS cannot be linked to the roller shutter/awning.
6.3.2 Adding the Telis 4 Soliris RTS

-- Switch

-- Press the PROGbutton (b) on the origi-
the mains power supply back
nal control point until the roller shutter/ awning moves briefly (or a series of 3 beeps is emitted): the programming function is activated for approximately 2minutes. -- Take the new Telis 4 Soliris RTS. -- Press the Selection button (E) to light up the indicator light that corresponds to the channel to which the roller shutter/awning will be linked. -- Press the PROG button (F) on the new Telis 4 Soliris RTS briefly with the tip of a pencil: the roller shutter/awning will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 4 Soliris RTS is stored.
4 Soliris RTS: -- If the roller shutter/awning is lowered, the Telis 4 Soliris RTS is operational. -- If the roller shutter/awning does not move, contact the Somfy assistance service. -- Replace the original control point front cover: -- Insert the mounting lugs into their notches on one side of the front cover. -- Press on the other side until it clicks, to fix the front cover in its bracket.

6.4 Timer

Move close to the roller shutter/awning to install the Telis 4 Soliris RTS. the roller shutter/awning to the midway position. -- Cut off the mains power supply. -- Remove the front cover: -- Lever it with a flat, pointed tool (such as a flathead screwdriver), without using force, around the upper section of the front cover to detach it from its mounting. -- The PROG button is located on top of the screen and is shaped like a tab(c). Caution! If after removing the front cover, no PROG button is found, this means that the control point is not compatible: the Telis 4 Soliris RTS cannot be linked to the roller shutter/awning.
6.4.1 Checking the compatibility
6.4.2 Adding the Telis 4 Soliris RTS
the mains power supply back on. -- Press the tab (c) until the roller shutter/awning moves briefly (or there is a series of 3 beeps): the programming function is activated for approximately 2minutes. -- Take the new Telis 4 Soliris RTS. -- Press the Selection button (E) to light up the indicator light that corresponds to the channel to which the roller shutter/awning will be linked. -- Press the PROG button (F) on the new Telis 4 Soliris RTS briefly with the tip of a pencil: the roller shutter/awning will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 4 Soliris RTS is stored. -- Press the Down button on the new Telis 4 Soliris RTS: -- If the roller shutter/awning is lowered, the Telis 4 Soliris RTS is operational. -- If the roller shutter/awning does not move, contact the Somfy assistance service. -- Replace the original control point front cover: -- Insert the front cover on its bracket, allowing the buttons to come through their housings. -- Press the front until it clicks, to fix the front cover in its bracket.

6.5 Situo control point

Move close to the roller shutter/awning to install the Telis 4 Soliris RTS.
6.5.1 Adding the Telis 4 Soliris RTS
the roller shutter/awning to the midway position. -- Remove the front cover from the Situo: -- Gently remove the front cover with a flat, pointed tool (such as a flathead screwdriver) around the lower section. -- Lever it and lift the cover, without using force, to detach the mounting lugs from the front cover. -- Turn the front cover over: the PROG button is located next to the battery(d). -- Press the PROG button (d) on the Situo until the roller shutter/awning moves briefly (or a series of 3beeps is emitted): the programming function is activated for approximately 2minutes. -- Take the new Telis 4 Soliris RTS. -- Press the Selection button (E) to light up the indicator light that corresponds to the channel to which the roller shutter/awning will be linked. -- Press the PROG button (F) on the new Telis 4 Soliris RTS briefly with the tip of a pencil: the roller shutter/awning will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 4 Soliris RTS is stored.
4 Soliris RTS: -- If the roller shutter/awning is lowered, the Telis 4 Soliris RTS is operational. -- If the roller shutter/awning does not move, contact the Somfy assistance service. -- Replace the Situo front panel: -- Insert the mounting lugs in their notches. -- Press the lower section until it clicks, to fix the front cover in its bracket.
The Telis 1 RTS has one indicator light (5a) and the Telis Soliris RTS has two indicator lights (5b). If the original remote control has more than two indicator lights, refer to the section "Telis 4 RTS/Telis 4 Soliris RTS remote controls". Move close to the roller shutter/awning to install the Telis 4 Soliris RTS.
6.6 elis 1 RTS/Telis Soliris RTS T remote controls
6.6.1 Adding a Telis 4 Soliris RTS
the roller shutter/awning to the midway position. -- Turn the original Telis over: the PROG button (g) is located on the rear panel. -- Press the PROGbutton (g) with the tip of a pencil until the roller shutter/awning moves briefly (or a series of 3beeps is emitted): the programming function is activated for approximately 2minutes. -- Take the new Telis 4 Soliris RTS.
the Selection button (E) to light up the indicator light that corresponds to the channel to which the roller shutter/awning will be linked. -- Press the PROG button (F) on the new Telis 4 Soliris RTS briefly with the tip of a pencil: the roller shutter/awning will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 4 Soliris RTS is stored. -- Press the Down button on the new Telis 4 Soliris RTS: -- If the roller shutter/awning is lowered, the Telis 4 Soliris RTS is operational. -- If the roller shutter/awning does not move, contact the Somfy assistance service.
The Telis 4 RTS (6a) and Telis 4 Soliris RTS(6b) have 4 indicator lights. Move close to the roller shutter/awning to install the Telis 4 Soliris RTS.

6.7 elis 4 RTS/Telis 4 Soliris T RTS remote controls
6.7.1 Adding a Telis 4 Soliris RTS
the original Telis, select the indicator light which controls the roller shutter/awning only, with button(f). -- Bring the roller shutter/awning to the midway position. -- Turn the original Telis over: the PROG button (g) is located on the rear panel.
the PROGbutton (g) with the tip of a pencil until the roller shutter/awning moves briefly (or a series of 3beeps is emitted): the programming function is activated for approximately 2minutes.

-- Take

the new Telis 4 Soliris RTS. the Selection button (E) to light up the indicator light that corresponds to the channel to which the roller shutter/awning will be linked.
the PROG button (F) on the new Telis 4 Soliris RTS briefly with the tip of a pencil: the roller shutter/awning will make another brief movement (or emit a series of 8beeps) to indicate that the new Telis 4 Soliris RTS is stored. -- Press the Down button on the new Telis 4 Soliris RTS: -- If the roller shutter/awning is lowered, the Telis 4 Soliris RTS is operational. -- If the roller shutter/awning does not move, contact the Somfy assistance service.
7. Replacing a lost or broken control point
If the original control point is lost or broken, there are two possible situations: he lost or broken control point is the only control point for the roller t shutter/awning, he lost or broken control point is not the only one which controls t the roller shutter/awning.
7.1 Sole control point lost or broken
Contact the Somfy assistance service so they can provide guidance for the replacement of the sole lost or broken control point. one of the control points linked to the roller shutter/awning. the steps described in the section "Adding the Telis 4 Soliris RTS" according to the control point model. Note: If, after having followed this operation, there is not a brief movement (or a series of beeps) from the roller shutter/awning, contact the Somfy assistance service so they can provide guidance for the replacement.

-- Follow

7.2 ne lost or broken control point amongst others O
Somfy advises that the Telis 4 Soliris RTS be installed in close proximity to the product to which it is linked, to avoid it having to perform any unnecessary searches. The minimum distance which must be kept between the two RTS control points is: 30 cm. -- Drill a 6 mm diameter hole. -- Push in the plug (4). -- Fix the bracket (3) with the screw (5). -- Screw the mounting pin (2) on the bracket (3). -- Hook the Telis 4 Soliris RTS (1) onto the mounting pin(2). Note: Do not attach the Telis 4 Soliris RTS to a metal surface.

8. Mounting the bracket

9. veryday use of the E Telis 4 Soliris RTS

9.1 Channel selection

the selection button (E) to turn on the indicator light that corresponds to the roller shutter/awning or group of products to be controlled.
the Up button (h): the roller shutter/awning moves upwards/inwards and automatically stops in the raised/ open position. -- Press the Down button (i): the roller shutter/awning moves downwards/ outwards and automatically stops in the lowered/closed position. To move from the Up to the Down direction (and vice versa), it is not necessary to press the my button. The my button has two functions: -- A STOP function: a brief press of the my button stops the roller shutter/ awning moving. -- A my function: a brief press of the my button sends the roller shutter/awning to the favourite position, if a favourite position has been stored and if the roller shutter/awning is stationary. To find out more about the my function, visit Somfy's website at the following address: http://www.somfy.com/mysomfy/

9.2 Up and Down buttons

9.3 My button

9.4 Sun function

The Sun function can only be activated if a Sun sensor or a Wind and Sun sensor is linked to the products. Caution: The use of an additional wind protection device (e.g. wind sensor) is recommended for awnings. Caution! Where a wind sensor is linked to the same products, and if the wind speed exceeds the threshold set by the wind sensor, the products stop reacting to changes in sunlight until after the wind speed reduces to safe levels.
9.4.1 Activating the Sun function
the Selection button (E) to select Channel 5: the four indicator lights flash.
-- Press the Selection button (E) again and
keep it pressed until the two Wind/Sun indicator lights come on:the Sun function is active: the products allocated to channel 5 move briefly. t he products allocated with channel 5 react automatically to changes in sun and wind. the Selection button (E) to select Channel 5: The four indicator lights flash.
9.4.2 eactivating the Sun function D
keep it pressed until the two Wind indicator lights come on:the Sun function is no longer active:the products allocated to channel 5 move briefly. t he products allocated to channel 5 react automatically to changes in wind.
9.4.3 ow does the roller shutter/ H awning react?

-- Refer

to the guide to the roller shutter/ awning sensors for details of how the roller shutter/awning reacts to sunlight and wind.

Environmental warning Do not dispose of the used battery with household waste, see paragraph 2.3. -- Unscrew the rear casing of the Telis 4 Soliris RTS. -- Push the battery out of its housing with a plastic object. -- Insert a battery with identical specifications, the surface marked with a plus (+) and with text facing upwards. -- Push the battery fully into its housing. -- Screw the rear casing of the Telis 4 Soliris RTS back on. -- Press a button on the front panel: if one or all or the indicator lights come on, the battery replacement is correct. Caution: the Telis 4 Soliris RTS will store the last channel activated.
9.5 Replacing the battery

9.6 Maintenance

-- Clean
the Telis 4 Soliris RTS with a damp cloth using multi-purpose household or glass cleaning product. -- Never immerse or soak the Telis 4 Soliris RTS in any liquid.
10. Problems with the Telis 4 Soliris RTS?
Problem The roller shutter/awning does not move after a button on the Telis 4 Soliris RTS is pressed. Possible causes The Telis 4 Soliris RTS is too far away from the roller shutter/awning to be controlled. The Telis 4 Soliris RTS battery is weak. Solutions Move it closer to the roller shutter/awning and press a button on the Telis 4 Soliris RTS again. If it still does not work, replace the battery. Replace the battery with a battery which has identical specifications - see the paragraph: "Replacing the battery". Select the correct channel.
The selected channel is not the one that controls the roller shutter/ awning. The indicator light on the Telis 4 Soliris RTS does not come on. The Telis 4 Soliris RTS battery is weak.
Replace the battery with a battery which has identical specifications - see the paragraph: "Replacing the battery". Turn the Telis 4 Soliris RTS so that the indicator lights are below the Up/my/Down buttons. Contact the Somfy assistance service. Contact the Somfy assistance service.
The roller shutter/awning is raised when the Down button is pressed. The roller shutter/awning is lowered when the Up button is pressed. The new Telis 4 Soliris RTS cannot be used even after following the procedure step by step. The motor does not move or emit any beeps.
The Telis 4 Soliris RTS is held upside down. The original control point has a single button. The new Telis 4 Soliris RTS was not linked successfully.
Contact the Somfy assistance service.
Problem The Telis 4 Soliris RTS controls another roller shutter/awning. The roller shutter/awning does not react when the sun appears/disappears.
Possible causes A problem occurred while linking the Telis 4 Soliris RTS. The Sun function is not active. There is no Sun sensor. The threshold is incorrectly set. The roller shutter/ awning is not linked to channel 5 of the Telis 4 Soliris RTS.

Solutions Contact the Somfy assistance service. Activate the Sun function. Add a Sun sensor. See the sensor guide. Link the roller shutter/awning to channel 5 of the Telis 4 Soliris RTS - see paragraph "How to link the Telis 4 Soliris RTS to each roller shutter/ awning".

-- For

any unresolved questions or problems, please contact the Somfy assistance service on the number given on the back cover of this guide

Where to find us

Australia Somfy PTY LTD Tel: +61 (0)0744 Website: www.somfy.com/au/index.cfm Canada Somfy ULC Tel: +1 (0) 6446 Website: www.somfy.com/nam/index. cfm?language=en-us United Kingdom Somfy LTD Tel: +44 (0) 3030 Website: www.somfy.co.uk/ United States of America Somfy Systems Inc. Tel: +1 (0) 1300 Website: www.somfy.com/nam/index. cfm?language=en-us
Somfy hereby declares that this product conforms to the essential requirements and other relevant provisions of Directive 1999/5/CE. A Declaration of Conformity is available at www.somfy.com/ce. For use in the European Union, the Swiss Confederation (Switzerland) and Norway.
Photos are not contractually binding
Somfy SAS, with capital of 20,000,000 Euros, RCS Bonneville 303.970.230 - 07/2008