Fixes/Changes from 23.05.000 to 24.05.000:
SystemBuilder Added support for ATC-AMFMXMD Added BOM entries for ATC-AMFMXMD Updated Multizone Lighting Modules
Fixes/Changes from 23.00.000 to 23.05.000:
SystemBuilder Added support for TPMC-9, CEN-CX7000ES, Sony BDP-CX7000ES, DM-RMC-100-S, DMCI-DMC-S, DM-TX-201-S, DMC-S, DMC-SO-HD (DMC0-44), DMCI-DMC-S, DM-MD8x8 with RPS, DMCI-DMC-S-DSP, DMC-S-DSP, DMCO-00, DMCO-40, DMCO-43, DMCO-44, DMCO-45, DMCO-51, DMCO-53, DMCO-54, and DM-MD16x16-RPS Fixed a bug causing initial missing source icons in the Audio Room source list after a reboot.
Fixes/Changes from 22.05.000 to 23.00.000:
SystemBuilder Added BOM entries for SonyBluRayChanger, DM-MD32x32-RPS and ATC-AudioNet Added support for DM-MD32x32-RPS, TPMC-4SMD and ATC-AudioNet Added I2P IR Files Fixed issue where CLW-DIMEX/DIMSWEX feedback signals are not connecting properly in SB
Fixes/Changes from 22.01.000 to 22.05.000:
SystemBuilder Added BOM entries for TPMC-V12, TPMC-V15, MMK-G1-CBF-T, TPMC-4SMD, MTX-3, TPMC-9 and HD-DA-2 Added support for MTX-3, DM-TX-201-C, DMC-FO, DMC-C-DSP, DMCI-DMC-C-DSP, DMCI-DMC-C, DMC-CO-HD, DMC-C and DM-RMC-100-C D3 Pro

Page 5 of 36

Added additional DIN rail enclosures for D3Pro versions later than 2.9 Added BOM entries for GLPAC-DIMFLV8, GLPAC-DIMFLV8-PM, GLPAC-DIMFLV4 and GLPAC-DIMFLV4-PM
Fixes/Changes from 22.00.000 to 22.01.000:
SIMPL For AMS touch panels, when navigating the ADMS on-screen display theater source selection list, after selecting a source that contains a video output, the touch panel will page flip to the source control page of the new source. Fixed some timing issues when triggering interrupts for the AES, AADS, AADS-XM, AMS, AMS-AIP, and AAE for additional Adagio rooms. SystemBuilder Added BOM entries for ANT-EXT-5 & ANT-EXT-10 Added BOM entries for DMCI-DMC-HD, DMCI-DMC-HD-DSP, DMCI-DMC-VID-BNC, DMCIDMC-VID-RCA-D, DMCI-DMC-VID-RCA-A, DMCI-DMC-VID4, DMCI-DMC-F, DMCI-DMC-FDSP, DMCI-DMC-CAT-DSP & DMCI-DMC-CAT Added support for P-CBI and P-CBI-Wired Added BOM entries for P-CBI & P-CBI-Wired Fixed some timing issues when triggering interrupts for the AES, AADS, AADS-XM, AMS, AMS-AIP, and AAE for additional Adagio rooms. For AMS touch panels, when navigating the ADMS on-screen display theater source selection list, after selecting a source that contains a video output, the touch panel will page flip to the source control page of the new source.
Fixes/Changes from 21.05.000 to 22.00.000:
D3 Pro Added InfinetEX support for D3Pro version later than 2.8 SystemBuilder Added support for iPad and QM-AE1 Added Roomview Connected Display module Added support for DMCI-DMC-SDI, DMCI-DMC-F-DSP, DMCI-DMC-F, DMC-SDI, DMCIDMC-CAT, and DMCI-DMC-CAT-DSP Added BOM Entries for DMCI-DMC-SDI, DMC-SDI, and P-CBDEX Removed ability for SystemBuilder to set PSPHD source names at design time SIMPL Added Roomview Connected Display Module

Page 9 of 36

D3Pro Added GLS Occupancy Sensors Support Added GLS-SIM Support
Fixes/Changes from 20.03.009 to 20.04.006:
SystemBuilder BOM Data for TPS-6X-B-T Added support for CEN-ISERVER SIMPL Windows Fixed bug in APAD module for the CEN-ISERVER Updated NVS100 modules
Fixes/Changes from 20.02.013 to 20.03.009:
D3Pro Added 4x24 DIN Cabinet SIMPL Windows Added I2P modules SystemBuilder Added I2P modules
Fixes/Changes from 20.01.008 to 20.02.013:
SystemBuilder Added DVR DSS Cable IR Drivers Added I2P Modules Added CEN-NVS100 Modules SIMPL Windows APAD support for the CEN-ISERVER
Fixes/Changes from 20.00.015 to 20.01.008:
SystemBuilder Added data for use by SystemBuilder Remote System Definition (RSD) devices Added new "Room X Visible" parameters for AMS and AMS-AIP room UI modules Added new System device module Added support to restrict control systems based on application and version (minimum/maximum)

Page 10 of 36

Added I2P modules BOM data for new Cameo colors Initial release for QM-WCC-2 and QM-WCC-VCC SIMPL Windows Added I2P modules D3 Pro Added support to restrict control systems based on application and version (minimum/maximum)
Fixes/Changes from 20.00.010 to 20.00.015:
D3Pro "Unable to connect all signals" warning will be produced at build-time if Device Database 20.01.002 or later is not installed. The generated program will still function correctly, but the new tstatrf features(min firmware v1.005.00) will be inaccessible. Updated module TSTATRF Scheduler (5-2 program) v1.4.csp which fixes issue that scheduler never enters into Celsius or Fahrenheit mode and reports 32 as temperature. SystemBuilder Prepared for the removal of the following template pages: Arrakis C-Band Satellite CD Changer Custom 1 Digital Jukebox Dual Cassette Dual-Deck VCR Laser Disc Changer Laser Disc Slide Projector Streaming Content TV Tuner with DVR Optimized MPS Front Panel Interface modules Updated the following modules with standard commands: XM (CEN-TRACK) Hardware Interface v1.cmc SIRIUS (CEN-TRACK) Hardware Interface v1.cmc AMFM (CEN-TRACK) Hardware Interface v1.cmc AMFM2 (CEN-TRACK) Hardware Interface v1.cmc Crestron C2N-TXM Hardware Interface v2.0.cmc CEN-IDOC Hardware Interface v2.0.cmc AAS Hardware Interface v1.3.cmc Sirius Hardware Interface v2.0.cmc XM Hardware Interface v2.0.cmc Created new version of existing APAD module from cnhtpi22.cmc to cnhtpi23.cmc "Unable to connect all signals" warning will be produced at build-time if Device Database 20.01.002 or later is not installed. The generated program will still function correctly, but the new tstatrf features(min firmware v1.005.00) will be inaccessible. Made changes to APAD IDoc GUI Interface (Non-Adagio) v1_0.cmc to fix issue with "not connected message" failing to show up on the APAD when the IDOC was not connected. Updated module TSTATRF Scheduler (5-2 program) v1.4.csp which fixes issue that

Page 11 of 36

scheduler never enters into Celsius or Fahrenheit mode and reports 32 as temperature. SIMPL Windows
Fixes/Changes from 20.00.001 to 20.00.010:
D3Pro New Device Support DIN-RAIL CLS-C6RF Update to TSTATRF modules (added Auto Mode support) SystemBuilder New Device Support DIN-RAIL CLS-C6RF Added new version of module C2N-VEQ4 4ch with 10 band EQ v1.2.cmc which resolves the issue at program reset with the mute turning on when previously off. Added full support for MPC. Adjusted default template page assignments for some devices Added some new standard commands Modified MPS-100/200 modules for 4.0 cuz Updated MPC-M10/M20/M25 modules Added preview images for new interfaces Updated the following modules: AMFM Hardware Interface v2.1.cmc AMFM2 Hardware Interface v2.1.cmc AMFM (CEN-TRACK) Hardware Interface v1.cmc AMFM2 (CEN-TRACK) Hardware Interface v1.cmc Update to TSTATRF modules (added Auto Mode support) SIMPL Windows Module support for MPC-M25 Modified MPS-100/200 modules for 4.0 cuz Updated MPC-M10/M20/M25 modules Update to TSTATRF modules (added Auto Mode support)
Fixes/Changes to 20.00.001:
Initial Crestron Database release without PanelDef
Prior Crestron Database Release Notes
Version 19.09 Added MPC support for SystemBuilder Recategorized Adagio modules into categories per processor (AMS/AMSAIP/AES/AADS/AADS-XM)

Page 12 of 36

Added database entries for MPC control systems (MPC-M25, MPC-M20, MPC-M10) Added database modules for MPC-M25 control system and front panel buttons Makes it simpler to program display warm up and cool down times in SystemBuilder for AMS and AMS-AIP systems Added Policy Server module for Adobe e-Control interface Version 19.08 APAD AAS (Simple Browse Context) GUI Interface (Non-Adagio) v1.0.cmc - correction for "no driving source" warnings during program generation Fixed a problem with SystemBuilder synchronization not working correctly for Device ID, Source ID, and Net ID fields in AMS and AMS-AIP systems Fixed a logic wave overflow problem when generating AMS-AIP systems with more than 21 rooms Re-categorize the Symbol Tree for AMFM/SIRIUS/XM (CEN-TRACK) Hardware Interface to show up in "Tuners" instead of "Adagio" Re-categorize the Symbol Tree for the Touch Panel (CEN-TRACK) Tuner GUI/Hardware Interface, APAD (CEN-TRACK) Tuner GUI/Hardware Interface and SystemControls modules to be set to "0" or hidden since it is only used in SystemBuilder For SystemBuilder, "Enable_Browsing" is enabled by default on startup in the Touch Panel (CEN-TRACK) Tuner GUI Interface and APAD (CEN-TRACK) GUI Interface modules Fixed issues with SideShow support for On-Screen Display and Adagio Front Panels in SystemBuilder Added full support for TPMC-4XG Version 19.07 Added support for MPC and MPS-250 Version 19.06 Added Generic Analog Input (analog_input_x1.cmc) Added Generic Digital Output (dig_output_x1.cmc) Added Photocell Sensor (photocell_analog_v1_1.cmc) Added support for TPMC-4XG within PanelDef Added support for DVPHD firmware version 3.001.0027 Added support for Crestron SideShow Release D-NAV object for TPMC-8X, TPMC-8L, TPS-12, TPS-15, TPS-17, TPS-12G-QM, TPS-15G-QM, TPS-G-TPI, TPS-GA-TPI and DVPHD Panels. Version 19.05 Enabled Engraver view for the QMMD 4X4, and QMMD 16X16 Version 19.04 Added SIMPL Windows support for AMS-AIP Fixed C2N-TXM used with APADs Fixed APADs with the AAS on AADS systems Bug fix for D3Pro caused by cresdb 19.04.07 - Unable to add Fluor. Dim Loads or open an existing project containing such load types. Version 19.03

Page 13 of 36

Added Crestron Modules, Simpl+ and Database entries for AMS-AIP support. Version 19.02 Update to c2n-sdc shade control module Version 19.01 Added support for new keypads: HTT-B10X, C2NI-CB, INET-CBD, and INETI-CB Updated modules: TSTAT w/5-2 Scheduler, THSTAT w/5-2 Scheduler, TSTATRF w/5-2 Scheduler D3Pro database entry: Added support for startup delay of a switched non-lighting load on CLX-4HSW4 Version 19.0.8 Added MPS-300 Protected Modules. Fixed: Crestron C2N-TXM Hardware Interface v2.0.cmc. After program upload or reset, incorrect power state of device was possible. Added ability to detect and then power cycle in this error state. Version 19.0.7 Added support for the C2N-CB-TS. Note: D3Pro v2.5.5 or later required. System Builder v3.03 will only generate default keypad parameters and will ignore the settings chosen in the keypad properties menu. Non-default values must be set manually in the generated simpl windows program. Engraver support for the MPS-300. Version 19.0.6 Fixed: AES front panel was including the wrong XM module. Fixed: Engraver was causing SystemBuilder to incorrectly assign programmable hardbuttons on the TPMC-8L. Fixed: cnctrl2.mdb was wrongly packaged as read-only. Version 19.0.5 Added full support for CEN-IDOC Search feature. Note: Feature requires firmware version 1.003.0021 or higher. Added additional Engraver support. Version 19.0.4 Internal Fixes. Version 19.0.3 Added full support for RGBHV switchers Added TPS-6L Cresnet, Ethernet for SB and D3 Pro Engraver support for C2N-CB-T,S CHV-TSTAT and CHV-THSTAT modules v3.2 includes a bug fix and new direct setpoint signals Wrapper module for C2N-CB-TS for use in System Builder and D3Pro

Page 14 of 36

Added scrolling list for AM/FM channels or presets Allow multiple touch panels to have independent browsing on the same AM-FM tuner. Added scrolling list support for Adagio Large TP AMFM GUI Interface v2.1 and/or Adagio Small TP AMFM GUI Interface v2.1 modules. Version 19.0.2 Added limited support for RGBHV switchers Added iMedia output cues: System_Ready_Pulse Pulses when the system program has finished initializing Supports_IM-RXVx-M High if the "Version" console command reports back IM-RXVx-M. Low for non -M units. Show_Master_Volume_Subpage High if "Knob is Master" feedback and "Support_IM-RXVx-M" are both high. High for non -M units. Show_Program_Volume_Subpage High if "Knob is Master" feedback is low and "Support_IM-RXVx-M" is high. Low for non -M units. Store BOM Group IDs for iMedia transmitters in control database for SystemBuilder iMedia Wizard. Version 19.0.1 Internal fixes. Version 19.0.0 Add support for IM-RXV-M SystemBuilder: AAS day 3 support added. NOTE: This requires AAS firmware version 3.0.1359.0 or later. Engraver: Change font used for TPMC-8L Overview of module changes: Updated AMS Standard Functionality module to include HDMI debugging and new decoding modes Added modules for APAD and AES/AMS Front Panel control of AAS Simple Browse Context Added modules for touch panels to use new AAS Jukebox Mode Browse Context Updated XM and SIRIUS modules to turn off Diagnostic Mode after 2 minutes of no activity Added new 12-Button Keypad module for SystemBuilder use, to allow selection of source 11 on AMS systems Updated AES/AMS/AADS AMFM Hardware modules to allow SystemBuilder to correctly connect to basic functions (tuning,presets,etc.) from keypads. Updated Adagio modules: Adagio Large TP iPod GUI Interface v2.0.cmc CEN-IDOC Hardware Interface v2.0.cmc. APAD iPod GUI Interface v2.0.cmc AES+AMS Front Panel iPod GUI Interface v2.0.cmc Updated HVAC modules: chvthstat_nosked_v3_1.cmc chvthstat_sked_v3_1.cmc

Page 15 of 36

chvtstat_nosked_v3_1.cmc chvtstat_sked_v3_1.cmc Crestron CHV-TSTATRF w5-2 Scheduler v1.3.cmc Updated modules: C2N-DAP8RC v1.1.cmc MPS-100 XML Functions v1.csp/csh MPS-100 OOTBF Installer Tools v1.csp/csh MPS-100 Text Router v1.csp/csh MPS-100 protected modules New modules: Touch Panel Generic Scroller 50 items V1_0_0.csp Touch Panel Generic Scroller 50 items V1_0_0.csh Version 18.9.0 Add support for new TPMC-8x features. NOTE: firmware update 1.00.01.29 or newer is required. See TPMC-8x firmware update release notes for details about these new features. Version 18.8.8 SystemBuilder: Add support and Bill of Materials entries for TPMC-8L. Updated AMS related modules/protected modules: Adagio Large TP iPod GUI Interface v1.0.cmc Adagio Theater v1.0.cmc 12-Button Keypad GUI Interface v1.2.cmc Adagio 11-Source Room v1.0.cmc Adagio Theater Room Control And Setup v1.1.cmc Adagio Large TP Sirius GUI Interface v2.0.cmc Adagio Small TP Sirius GUI Interface v2.0.cmc Crestron C2N-TXM Touch Panel Interface v2.0.cmc Crestron C2N-TXM Small Touch Panel Interface v2.0.cmc AMS OOTBF XML Functions v1_1.csp/csh New AMS modules: Adagio Theater Room Control And Setup v1.2.cmc Adagio Theater 12-Button Keypad GUI Interface v1.2.cmc Simple Decoding Mode Selector v1.csp/csh Updated lighting/HVAC modules: CLX-4HSW4_v1_0.cmc CLX-2DIM2_v1_0.cmc CLX-1MC4_v1_0.cmc CLX-1DIM4_v_2.cmc CLX-1DIM8_v_1.1.cmc chvtstat_sked_v3_0.cmc chvtstat_nosked_v3_0.cmc chvthstat_sked_v3_0.cmc chvthstat_nosked_v3_0.cmc tstat scheduler2_v2_0.csp Engraver: Add support for QM-MD16x16 printed labels. Bill of Materials: Corrected database to address these issues that may occur when changing bezel colors: Engraver application bezel image flashes briefly after color change Engraver appliaction bezel image does not always match selected color. Order includes incorrect bezel part number after a color change. Version 18.8.7

Page 16 of 36

Updated AMS theater control modules Updated CHV-TSTATRF modules Updated IM-RX1 and IM-RX3 modules Add C2N-SDC-DC modules Panel definitions: Correct issue where TPS-4000L reserved joins were not shown in VT-Proe. Version 18.8.6 Updated AMS related modules and protected modules AMFM2 Hardware Interface v2.0.cmc AMFM Hardware Interface v2.0.cmc Adagio (AMS) Large TP Room GUI Inteface With Theater v2.1.cmc Adagio (AMS) 12 Button Keypad Interface v1.cmc XM Guide Engine.csp/csh Adadio System Info v1_3.csp/csh Version 18.8.5 Panel Definitions: Add TPMC-8L support Updated AMS related modules and protected modules Adagio (AMS) Source Start+Stop v1.cmc Adagio (AMS) Source Start+Stop v2.cmc AMS OOTBF Theater Mode v1_0.csp/csh Adagio (AMS) Start+Stop Processor v1.csp/csh Version 18.8.4 Panel Definitions: Corrected vertical coordinates for engraveable version of AMS front panel. Updated Vetra Wedge module Assigned correct template type for TSTATRF with no scheduling Updated AMS related modules Version 18.8.3 NOTE: Do not use AMS in SystemBuilder unless you have SystemBuilder 3.x or above, even though AMS may be visible in earlier versions of SystemBuilder. NOTE: If you are programming AMS in Simpl Windows, the AMS modules in this database are not the final versions. Please get Crestron database 18.8.4 or later. New Crestron modules NEC NP40 + NP50 + NP60 v1.1.cmc Runco CR-26HD + CR-32HD + CR-40HD v2.cmc Compare-Command Queue.csh/csp/cf RUNCO Serial Parser v2.csp/csh Updated Crestron hardware modules APAD Interface (AMS) With Theater v1_0_4.cmc APAD Interface (AMS) v1_0_4.cmc Adagio 11-Source Room v1.0.cmc Adagio Theater v1.0.cmc Crestron C2N-TXM Small Touch Panel Interface v2.0.cmc Crestron C2N-TXM Touch Panel Interface v2.0.cmc Adagio Large TP XM GUI Interface v1.1.cmc Sirius Hardware Interface v2.0.cmc

Page 19 of 36

Changes for TPMC-8x: Z-order change, Dynamic graphics aspect ratio support, updated reserved joins. NOTE: TPMC-8x firmware version 1.00.01.10 required to use these features SystemBuilder: Updated Bill of Materials list Updates to event scheduler modules. Updated Adagio control/interface, Adagio tuner and APAD related modules to support new AES feature set. Refer to 18.7.0 section below for more details about new AES features. Engraver Add support for DVPHD Version 18.7.5 Updated MPS-200 related modules/protected modules Version 18.7.4 Updated XM related modules SystemBuilder Adagio control/interface, Adagio tuner and APAD related module updates to support new AES feature set. Refer to 18.7.0 section below for more details about new AES features. Updates for AES front panel protected modules Version 18.7.3 SystemBuilder Updated Adagio control/interface, Adagio tuner and APAD related modules to support new AES feature set. Refer to 18.7.0 section below for more details about new AES features. Updated Bill of Materials list Updated MPS-200 related modules/protected modules Updated CHV-TSTATRF module Updated Motion Sensor module; now supports longer delay times. Version 18.7.2 SystemBuilder Updated Adagio control/interface, Adagio tuner and APAD related modules to support new AES feature set. Refer to 18.7.0 section below for more details about new AES features. Updated MPS-100 modules/module help for SystemBuilder support. Version 18.7.1 VTPro-e Allow user defined join assignment for MT-1000 hard keys SystemBuilder Updated Adagio and APAD related modules. Updated MPS-100 and MPS-200 modules Version 18.7.0

Page 20 of 36

SIMPL Windows Add support for MPS-200 SystemBuilder Add support for MPS-100 New AES related features: Optional Group Volume Control Line-Level Audio control Priority Mode Interrupt and Resume features Version 18.6.2 Update for CHV-TSTATRF module Changes to Event Scheduler 2 module: Suspend flag is now saved as part of each event fixed bug where multiple Saves could eventually corrupt data file Engraver Add support for MPS-200. New colors for CLW series. NOTE: Requires Engraver 3.4.0.3 or later. Version 18.6.1 Updated/New ATC-AMFMSR related modules Updated ATC-AMFMSR Bill of Materials entries Version 18.6.0 Add support for new device: ATC-AMFMSR IMedia Wizard: Add support for IM-FTCC-V and IM-WCCV Version 18.5.0 Add support for new devices: C2N-MNETRPRT TPS-GA-TPI CHV-TSTATRF CEN-TIA Updated C2N-RTHS module SystemBuilder Updated WPR-48 modules Updated MPS-100 related modules Version 18.4.5 SystemBuilder: Add AADS support Updated Adagio Large TP Room GUI Interface - Fixed an issue with volume subpage not displaying on smaller touch panels Updated Adagio Large TP AAS GUI Interface - Fixed logic for Back button so that it only appears on the AAS Browse and Playlist Manager pages Updated Adagio Room Control and Setup - Fixed source gain control/feedback synchronization Updated QM volume handler module

Page 21 of 36

Version 18.4.4 Updated MPS-100 protected modules and SystemBuilder support Modified "Vacation Scheduler" module (used by D3 Pro) to read/write from disk more efficiently Version 18.4.3 Updated 2 lighting modules: CLX-1DIM8 and CLX-1DIM4 Updated MPS-100 related Simpl+ module Added new MPS-100 related modules Updated MPS-100 protected modules VTPro-e support: Updated reserved join list Version 18.4.2 Updated CHV-TSTATRF modules Updated system module for D3Pro support Version 18.4.1 Updated MPS-100 protected module Updated other MPS related SIMPL+ modules Updated several Adagio tuner modules Add new module: APAD Long Text Edit.csp Version 18.4.0 New module for CHV-TSTATRF Updated CEN-TIA module New version of MPS-100 protected module Corrected many SIMPL+ CSH files. Fix corrects invalid parameter block in some SIMPL+ CSH modules causing SIMPL Windows compile errors about "partial subsitution". See SIMPL Windows release notes for details regarding user SIMPL+ modules. SystemBuilder: Add support for: TPMC-15-QM, TPMC-17-QM, TPS-15G-QM, TPS-G-TPI Fixed MPS-100 "connection point" bug. Updated device support modules Engraver: Add support for MPS-100 VTPro-e: Removed ST-4T/8T panel types. Use VTPro-e 2.2.3.6 or earlier for SmartTouch programming support. See VTPro-e release notes. Updated TPMC8x reserved join list. D3Pro: Fixed bug where some Cameo keypad buttons would appear with no feedback. NOTE: This will not fix existing projects. To fix an existing project, create a new keypad and copy logic from the original one, then delete the original. Version 18.3.3 SystemBuilder support: Updated AADS module help links Version 18.3.2 VTPro-e support: Updated TPMC-8x reserved join list

Page 22 of 36

SystemBuilder support: Assorted updates for AADS modules SIMPL Windows support: Corrected Symbol Tree classifications for multiple modules Version 18.3.1 VTPro-e support: Updated TPMC-8x reserved join list SystemBuilder support: Updated Adagio modules Version 18.3.0 VTPro-e support: Add TPMC-8x panel for initial release Update reserved join list for TPMC8x embedded applications. This change is needed when converting TPMC-10 projects to TPMC-8x. SIMPL Windows/ System Builder support: Updated AADS modules SystemBuilder suppport (QuickMedia systems): QM-FTCC-TPS4 device split into separate devices: QM-FTCC-TPS4 (Cresnet TP) QM-FTCC-TPS4 (Ethernet TP) This change allows selection of the device with either the integrated Cresnet or Ethernet touchpanel Version 18.2.7 Add module for AAS IR emulation Updated control system database files to correct front panel issue when creating a new project for AES control system. Version 18.2.6 Updated CEN-TIA module Updated control system database files Updated protected modules for Adagio support Version 18.2.5 Updated CEN-TIA modules Corrected control system database files for SIMPL/SystemBuilder support. Updated WPR-48 wrapper modules for D3 Pro/SystemBuilder support. Updated AADS modules VTPro-e support: Updated reserved join list Version 18.2.4 VTPro-e support: Updated TPMC-8x panel support/reserved join list Enable dynamic graphics for TPS-G-TPI. SIMPL Windows support: Updated AADS modules Updated QM-AE modules Version 18.2.3 VTPro-e support:

Page 23 of 36

Updated TPMC-8x panel support Engraver suppport: Updated part number list in database SIMPL Windows support: Updated AADS modules Revised some Crestron QM and DAP8 Audio modules to fix signed values setting Version 18.2.2 SystemBuilder support Crssplus.dat updated to add the CEN-TIA modules Updated the following modules within crsprtct.dat to address issue with hextoi function call APAD iPOD GUI Interface v1.cmc AMFM2 Hardware Interface v1.0.cmc AMFM Hardware Interface v1.0.cmc AADS Front Panel AMFM Tuner GUI Interface v1.cmc AES Front Panel AMFM Tuner GUI Interface v1.cmc APAD AAS GUI Interface v1.cmc APAD AMFM Tuner GUI Interface v1.cmc SIMPL Windows support MPS-100 front panel module updated Version 18.2.1 SystemBuilder support: Add support for AADS AADS-XM TPMC-4X CEN-TIA PAC2M D3 Pro support: Add support for PAC2M VTPro-e support: TPMC-8X panel added. SIMPL Windows support: Add support for MPS-100 Version 18.1.15 VTPro-e support: Enable dynamic graphics for TPS-12/15/17 panels. Version 18.1.14 SystemBuilder bug fix for programmable keypads: CN-WM CNWM-LT9 CNWM-LU12 CN-WP12F CN-WP12N Version 18.1.13 SystemBuilder support: additional AADS features, bug fixes ST-1700CIR added D3 Pro support ST-1700CIR added VTPro-e support: ST-1700CIR added

Page 24 of 36

TPMC-4X added added additional reserved joins to TPS-12/15/17 Engraver support: ST-1700CIR added CNX-B8 can now be engraved sideways Version 18.1.12 SystemBuilder support: added AADS support changed default warm-up and cool-down times for Power On/Off Timeout extender minor module bug fixes Version 18.1.11 Release candidate for SystemBuilder Adds support additional programmable buttons on MT-1000C Version 18.1.10 Release candidate for SystemBuilder Adds support for CNXRMIRD in SystemBuilder Fixes bug that causes CH Audio Dist. ROOM Setup v2.6 (cm) to lose its settings on startup Fixes Sleep Mode in SystemBuilder-generated Adagio systems Version 18.1.9 Release candidate for SystemBuilder v3.0.10 Adds support for C2N-SPWS300 in SystemBuilder Adds Real-Time support for C2(N)-VEQ4 in SystemBuilder Adds "In-Override" output to CLX-1DIM4 modules for SystemBuilder Version 18.1.8 Release candidate for SystemBuilder v3.0.9 Support for C2N-IADS30x24 in SystemBuilder Support for C2N-IVDS24x24 in SystemBuilder Corrects issues with third button of CLW-DIM4RF in detached mode Fixes handling of multiple interface modules connected to CEN-IDOC Hardware Interface v1.0 Fixes problems with startup problems with Scrolling List module in SystemBuilder Version 18.1.7 Release candidate for SystemBuilder v3.0.8 Optimizations in Adagio modules for use with SystemBuilder Real-Time mode Support for pad areas on TPS-12 Support for SystemBuilder programming of Adagio Audio Zones and sources with independent browsing from many touchpanels and keypads. The following exceptions apply: Audio Zone Exceptions: C2N-DBN12 CNX-BN12 QM-FTCC-TPS4 QM-FTSC (keypad) Independent browsing of supported sources (CEN-IDOC, ATC-AMFMXM, AAS-1/2/4) is not available from keypads or one-way touchpanels. Version 18.1.6 Fixes bug in QM modules which may prevent logic from stabilizing at startup

Page 25 of 36

Fixes SystemBuilder connection to CN-AMPX16x60 Revised control entries for SystemBuilder support of ATC-AMFMXM Version 18.1.5 Fixed D3Pro support for single-wide lighting cabinets broken in 18.1.3 Version 18.1.4 Support for CLX-1DIM8 and CLX-2DIM8 in SystemBuilder Support for C2N-IRGW(-1G) Revised Adagio modules for SystemBuilder support AAS : Fixed "Play Now" feature of Playlist Manager mode Version 18.1.3 Support for D3 Pro v2.2.6 or later added some images for QM products used by SystemBuilder Version 18.1.2 Fixed connection to second AM/FM tuner of ATC-AMFM2 in SystemBuilder Version 18.1.1 Revised Adagio modules for SystemBuilder support Version 18.1.0 Revised Adagio modules for SystemBuilder support CLF-DIMRF support in SystemBuilder and D3Pro Version 18.0.9 Revised Adagio modules for SystemBuilder support Version 18.0.8 Added modules for the following products: AES AAE APAD AAS-1 AAS-2 AAS-4 ATC-AMFMXM ATC-AMFM2 CEN-IPOD Added SIMPL Windows support for (requires SIMPL Windows v2.07.21 or later): AES bug-fix for real-time control in D3 Pro involving non-dim modules at certain Cresnet IDs added D3 Pro support for TPMC-15-CH and TPMC-17-CH Version 17.7.0 Added "dynamic graphic" support in VTPro-e for the TPMC-10 Version 17.6.2 Added support for PNG graphics for TPS-12, TPS-15, TPS-17 Fixes for D3 Pro/SystemBuilder wrapper modules for CLW-DIM(S)1, CLW-SW(S), and CLW-SW(S)1 Version 17.6.1

Page 26 of 36

Fixed corrupted definition of C2N-FTB (could cause SystemBuilder crash) Version 17.6.0 Added TPS-4L support to VTPro-e Added Engraver support for TPS-4L Modified Lightingdb.mdb to allow D3 Pro Module and Enclosure Wizard to run properly with D3 Pro v2.1.x Fixed bug in certain QM receiver modules that prevented unmuting the volume when used with QM switchers Added D3 Pro support for WPR-48, TPS-4L, MT-1000C Added SystemBuilder support for TPS-4L, TPS-G-TPI Changed default fade time of infiNET dimmers to 0.5s (when used with D3 Pro or SystemBuilder) Fixed bug in T(H)STAT Scheduler (v2.0.x) modules where setpoints would not always recall if there was only one schedule programmed per day. changed the maximum wattage allowed on a CLX-1DELV4 output in D3 Pro from 1080W to 1200W Added modules to control the following projectors/monitors: BenQ 8200/8220 BenQ 7200 Canon Realis SX-50 Digital Projection Mercury Series Digital Projection DVision Epson EMP-600, EMP-800, EMP-810, EMP-811, EMP-820 Epson EMP-7800, 7850 Epson 830P, 835P InFocus LP-820 InFocus LP-640, LP-540 InFocus LP840 Hitachi CP-X443, CP-X445 Hitachi CP-SX1350 Hitachi CMP4202U, CMP4201, CMP4121, CMP4120, CMP402, W42-PD1 LG L3200/L3700/L4200 LG RU-42PX10, RU-42PX11, RU-42PX20, RU-50PX10, RU-50PX11, RU50PX20 Mitsubishi HC2000 Marantz VP-12S3, VP-10S1 Mitsubishi XL-30U, XL-25U, SL-25U NEC/Mitsubishi LCD3000/4000 Optoma H77/H79/H78DC3 Optoma H77, H79 Optoma EP759, EP758, EP751 Panasonic PT-D5500, PT-D7500, PT-D7600, PT-D7700, PT-DW7000 Panasonic PT-AE900U Pioneer Pro-1410HD Runco PL-50HDX Samsung PPM42M5S, PPM42M5H, PPM50M5H, PPM63M5H Samsung PPM42S3, PPM50H3, PPM63H3 Sharp XG-MB70X Sony FWD-32LX1, FWD-42LX1 Sony PFM-42X1 Toshiba TDP-T40 Yamaha LPX-510 Yamaha DPX-1100 Yamaha DPX-1000

Page 27 of 36

Version 17.5.2 Fixed Engraver bug where engraved text on CT-1000 and LC-1000 panels could be lost Fixed Bill Of Materials bug where CLT-PWS75 was not being included with the CLXPWS75 Version 17.5.1 Removed the following unsupported Cameo colors from Engraver: Wine, Brick, Olive Version 17.5.0 Added VTPro-e support for: UPX-2-1GB UPX-2-MSO Added Engraver support for the following products (requires Engraver v2.6.0.6 or later): QM-FTCC-TPS4 C2N-FT-TPS4 all InfiNet switches and dimmers Added Real-Time support via SystemBuilder for the following products (requires Engraver v2.6.0.6 or later): TPS-12 TPS-15 TPS-17 TPS-12G-QM TPMC-15/17 TPS-15G-QM Added SystemBuilder support for: MC2W Remote Cresnet Processor Added the following items to the Bill Of Materials DB MT-1000C CNRFGWA-418 Added the following logic module(s): iLux Room Combining 1x5 Version 17.4.4 Correctly set the number of serial joins available in VTPro-e for the following panels: TPS-4L TPS-12/15/17 TPS-12/15-G-QM TPS-TPI-QM C2N-FT-TPS QM-FTCC-TPS4 Version 17.4.3 Internal changes to definitions of new TPS-B and TPS-G touchpanels Version 17.4.2 Updated wrapper modules for the CLW-SWxRF models. Now exposes the "Delayed Off Timer" parameter in SystemBuilder and D3 Pro. Fixed Bill Of Materials issue where CLW-xxxRF slaves were not being added to the BOM in D3 Pro or SystemBuilder. SystemBuilder support for: QM-FTCC-NB QM-FTDC-NB QM-FTMC-NB QM-FTMCSC-NB

Page 28 of 36

VTPro-e support for: TPS-G-TPI Version 17.4.1 Added SystemBuilder, Bill Of Materials, VTPro-e support for: TPS-12G-QM TPS-15G-QM C2N-FT-TPS4 QM-FTCC-TPS4 Version 17.4.0 Support for D3 Pro v2.0.x Logic generation fixes for CLW-SW(S), CLW-SW(S)1RF, CLW-SW(S)4RF, CLX-4HSW4 Updated real-time control logic (now requires Toolbox) Various Bill Of Materials database additions, fixes Updated modules for CLW-DIMS4RF and CLW-SWS4RF to match latest SIMPL changes (requires SIMPL Library 354 or later) VTPro-e and Engraver (requires v2.6 or later) support for: C2N-FT-TPS4 QM-FTCC-TPS4 Version 17.3.3 Fix for TPS-2000, where programmable buttons were not showing in proper location in SystemBuilder and D3 Pro Fix for CLW-DIM4RF and SW4RF modules which were missing default values for the "Local Control Button" paramter Version 17.3.2 Fix for CLX-HSW4 in D3 Pro v1.5.x and later (non-dim lights could flash on briefly at startup) Version 17.3.1 Added support for more cameo colors in Engraver, Bill Of Materials Added support for infiNET dimmers/switches in D3 Pro, SystemBuilder Fixed incorrect images in D3 Pro for CLX-2IND, CLX-4IND, and CLX-PWS75 Updated logic generation scripts for D3 Pro to support infiNET dimmers/switches and iLux Added SystemBuilder support for the TPMC-10-DSW Updated C2N-TXM module to be compatible with SystemBuilder templates Version 17.3.0 Add Engraver support for CLS-C6 Fix problem with IM-RX1 module. Max volume was resetting to 50% after reboot. Version 17.2.4 (Internal Alpha) Added Versioning info to control db, lighting db to prevent older versions of SystemBuilder, D3 Pro from showing newer, unsupported products Added D3 Pro support for the following products (NOTE: complete support is still in progress): CLW-DIMxxRF CLW-SWxxRF CLS-C6(M) (iLux) Version 17.2.3 Fixed lighting database bug that could cause D3 Pro crash

Page 29 of 36

Fixed support for TPMC-17 panels Version 17.2.2 Removed "system bar" for TPMC-15/17 and UPX/UPX-2(+) Updated modules for IM-RX1 and IM-RX3 Fixed CNXRMCS entry in BOM Version 17.2.1 Updated help for RoomView module SystemBuilder Support: QM-AE QMRMCRX-BA iMedia devices Limited SystemBuilder and D3Pro support for C2N-CB (Cameo) keypads (no rocker functionality available via these apps) Fixed bug where D3 Pro was not adding CLX-2DIM2 via Module Assignment Wizard VTPro-e support for TPMC-15/17, TPS-12/15/17 Updated Bill Of Materials database to include latest products Version 17.1.1 Updated for TSTAT and THSTAT scheduler modules (Firmware v2.xxx) to fix bug where a removed schedule could be recalled after midnight in some cases. Also added minor improvements. Engraver support for C2N-CB (Cameo) keypad Added module for using C2N-CB (Cameo) LEDs as a bargraph Updated the hard-button joins for the MT-1000C in VTPro-e Other updated SIMPL modules: Elmo TRV-35H Carrier ComfortZone RoomView QM Modules Version 17.0.2 Fixed issue in Audio Distribution systems where devices could turn on after a system reboot "CH Audio Dist. SYSTEM Device Start and Stop v2.1" Changed preferred lighting module to CLX-2DIM8 for D3 Pro Lighting Wizard (was CLX-1DIM8) Version 17.0.1 updated SystemBuilder QM modules Version 17.0.0 C2N-TFM/TTFVM now support US and Europe Added support for AudioRequest Pro (firmware 1.9.0) Includes THSTAT Scheduler module v2.1 which adds "HumidiferCall" input (connects directly to THSTAT device) SystemBuilder-related additions: Bug fixes Support for remote slave Ethernet/Cresnet processors Fixed C2N-DAP8 module so it connects to the Decoder_Volume signal Version 16.4.4 Same as v16.4.3, except minor changes to CNCAMIDJ in Engraver Version 16.4.3 Branch-release: this was really v16.4.0 with a fix for an engraver crash Version 16.4.2

Page 30 of 36

Fixed HP x8010 module which had an internally driven input Added "Both_Shades_" commands to C2N-SDC and C2N-SSC-2 modules for use with D3 Pro SystemBuilder-specific support QM-FTSC C2N-FTB C2N-VEQ4 C2N-CAMIDSPT (placeholder only, module incomplete at this time) Known issues: 7x2 and 5x1 modules missing some cue help Video sense outputs of origination points missing names for low states C2N-CAMIDSPT module incomplete Images for QM-TX missing for QM View Version 16.4.1 Minor fixes for CHV-T(H)STAT scheduling modules (old and new firmware versions) SystemBuilder-specific support: added support for QM flip-top boxes WPR-48 support QM-MD7x2, QM-MD5x1, QM-MD4x2, QM-MD8x8 support Added support for MT-1000C Version 16.4.0 Added modules for C2N-SSC-2 and C2N-SDC shade/drape controllers Added modules for C2N-TFM and C2N-TTVFM tuners Updated versions of Crestron CHV-T(H)STAT modules (for v1.xxx firmware). These new versions include minor fixes/enhancements Added help files for a number of logic modules in PDF (Adobe Acrobat) format Changed Time Zone designation for Alabama and Arkansas cities to Central Time (was Eastern Time) Changed Time Zone designation for Pensacola and Panama City, Florida to Central Time (was Eastern Time) Touchpanel-related changes: Added TPS-4000L support to VTPro-e/Engraver/D3 Pro/SystemBuilder Increased number of digital joins on the STX-1700CXP to 4000 (was 999) Engraver-related changes: Added silver button option for certain touchpanels Added support for TPS-4000L Added support for C2N-FTB D3 Pro-related changes: CLW-SW(S) and CLW-SW(S)1 units now support "Switched Outlet" loads in D3 Pro Version 16.3.4 Updated versions of CHV-THSTAT modules (minor bug fixes) Updated firmware name prefix for TPS-3000/3100/4000 touchpanels Modified lighting db so that the D3 Pro Module and Enclosure Wizard adds CLX1DIM8s instead of CLX-2DIM8s Version 16.3.2 Updated C2N-TXM module Updated TSTAT modules for v1.xxx firmware to be compatible with new template pages

Page 31 of 36

SystemBuilder support for CLW-xxx firmware v2.xx Added support for: TPS-3100L TPS-4000/L Version 16.3.0 Added support for CLW-DIM(S)1 and CLW-SW(S)1 dimmers/switches Added support for the TPMC-10 Added new modules for the CHV-TSTAT and CHV-THSTAT with firmware v2.xxx Version 16.2.3 Added WPR-48 support for Crestron Engraver software Fixed bug where CLX-1FAN4 was being omitted from the BOM in D3 Pro (bug was introduced in v16.2.2) Version 16.2.2 Added many new modules for Video Projector control Adds CNPI-16B support to D3 Pro and SystemBuilder Updated version of C2N-TXM module Updated version of CLW-DIM module for use with AppBuilder and SystemBuilder Engraver support for QM-FTSC, QM-MD4x2, QM-MD7x2, QM-MD8x8 VTpro-e support for the C2N-IIF (sound files only) TPS-4000 support Version 16.1.5 Updated QuickMedia modules Updated standard command definitions for all "TV" and "TV Tuner" IR drivers Bill Of Materials updates Version 16.1.4 Updated QuickMedia modules C2N-DAP8 module C2N-TXM module Improved CHV-TSTAT and THSTAT modules Updated existing projector modules to be more "standard command" compliant VTPro-e support for the ML-500 and C2N-IIF New IR drivers Engraver support for the following products: QM-MD8X8 Added support for the following interfaces in D3 Pro: TPS-3000L TPS=1700 STX-1700CXP TPS-TPI w/Ethernet Version 16.1.2 Reintroduced QuickMedia modules (for SystemBuilder support) Version 16.1.1 Added Engraver knowledge of buttonless bezel for 1700-series touchpanels Updated scheduling modules for CHV-TSTAT/THSTAT Version 16.1.0 Added support for Media Manager plug-in in the SystemBuilder application Added engraver support for buttonless 1700-series touchpanels All IR drivers have been updated with new "standard command" info (the function names and IR data inside each driver have not been changed) Added new Bill Of Materials database for use with SystemBuilder and future

Page 32 of 36

applications Added/updated modules for the following video projectors Barco iQ Eiki LC-X986 Eiki LC-XG100 Epson 8300 Epson EMP-5600 Epson EMP-7600 Epson EMP-7700 Epson EMP-8100 Epson EMP-8150 Epson EMP-9100 Epson EMP-8200 Hitachi CP-X870 Projector.cmc HP xp8010 InFocus ScreenPlay 7200 JVC DLA-SX21 Mitsubishi X500U NEC MT-860 NEC MT-1060 NEC MT-1065 Runco VX-5000c Sharp PG-A10S Version 16.0.4 Fixed bogus SIMPL+ references in "Carrier Comfort Zone II v3" module Updated "Check For Program Changes" module Updated Vacation Scheduler module (used by D3 Pro) Fixed bug where TPS-3000L Rackname should be TPS-3000L and firmware prefix should TPS-3000. Added IR drivers for the following devices Dukane / 8756 / Projector JVC / SRV10U / VCR Samsung / VS-3500 / DVD Sony / DVP-NC665P / DVD Sony / SLV-900 / VCR Sony / SLV-N500 / VCR Zenith / L30W36 / Plasma Version 16.0.2 Fixes bug where converting projects into XPanel would lose certain join numbers Add new IR and RS-232 devices Version 16.0.new IR drivers Updated Reserve Joins database for VTPro-e Updated Scheduler modules to support NVRAM Disk D3 Pro support: updated 3-Wire Motor model updated Bill Of Materials database updated module wizard rules to change default load assignments allow "switched" load types to be places on CLX-xDIMy modules Version 15.9.9 Release version including some minor fixes to v15.9.8