4-178-242-11(1)

The software of this system may be updated in the future. To find out details on any available updates, please visit: http://www.sony.com/bluraysupport/
Blu-ray Disc/DVD Home Theatre System

Operating Instructions

BDV-E770W / T77

2010 Sony Corporation

Printed in Malaysia

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Indoor use only.
housing is opened, so be sure to avoid direct eye exposure. This marking is located on the laser protective housing inside the enclosure.

Owners Record

This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior.
The model and serial numbers are located at the rear exterior of the control unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. BDV-E770W/BDVT77 Serial No.______________ The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna (aerial). Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Precautions

On power sources
The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. These following indications are located on the rear exterior.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this Blu-ray Disc / DVD Home Theatre System is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

Settings and Adjustments

Using the Setup Display.. 50 [Network Update].. 50 [Screen Settings].. 50 [Audio Settings]. 51 [BD/DVD Viewing Settings].. 52 [Parental Control Settings]. 53 [Music Settings]. 53 [System Settings].. 53 [Network Settings].. 55 [Easy Setup].. 55 [Resetting].. 55

Playback

Playing a Disc.. 29 Playing from a USB Device. 30 Enjoying an iPod.. 30 Playing via a Network.. 31 Available Options.. 32

Additional Information

Precautions.. 56 Notes about the Discs.. 57 Troubleshooting. 58 Playable Discs.. 65 Playable Types of Files. 66 Supported Audio Formats. 67 Video Output Resolution.. 67 Specifications.. 68 Language Code List.. 70 Glossary.. 71 Index... 74

Sound Adjustment

Selecting the Effect to Suit the Source.. 34 Selecting the Audio Format, Multilingual Tracks, or Channel. 34 Enjoying Multiplex Broadcast Sound... 35 Using the Sound Effect.. 35
Listening to the Radio.. 37

External Audio Device

Using an S-AIR Product.. 39

Other Operations

Using the Control for HDMI Function for BRAVIA Sync.. 43 Calibrating the Appropriate Settings Automatically.. 45 Setting the Speakers.. 46 Using the Sleep Timer. 48 Deactivating the Buttons on the Unit.. 48

Unpacking

Front speakers (2) Speaker cords (6, white/red/ blue/gray/green/purple) Wireless transceivers (2)
Surround speakers (2) Video cord (1)

Center speaker (1)

Remote commander (remote) (1)
Operating Instructions Quick Setup Guide To stabilize S-AIR reception End user license agreement Easy Setup Disc (DVD) USB Wireless LAN Adapter (UWA-BR100)
R6 (size AA) batteries (2) Subwoofer (1) Calibration mic (1)

UWA-BR100 External cable

For BDV-T77
Surround amplifier (1) FM wire antenna (aerial) (1)

HDMI cable (1)

Preparing the remote
Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment.
Index to Parts and Control
For more information, refer to the pages indicated in parentheses.

Front panel

FUNCTION

VOLUME

A "/1 (on/standby)

(USB) port (page 30)

Turns on the unit, or sets it to standby mode.
B Play operation buttons Z (open/close) (page 29) E
Used for connecting a USB device.
D Front panel display (remote sensor) F Power indicator
Opens or closes the disc tray.

N (play)

Lights up while the system is turned on.

G Disc tray (page 29)

Starts or re-starts playback (resume play). Plays a slideshow when a disc containing JPEG image files is inserted.

x (stop)

Stops playback and remembers the stop point (resume point). The resume point for a title/track is the last point you played or the last photo for a photo folder.

A THEATER (page 44) HOME (pages 25, 37, 39, 45, 46, 50)
Switches to the optimum video mode for watching movies automatically.

ONE-TOUCH PLAY (page 44)

Enters or exits the systems home menu.

SOUND MODE (page 34)

Selects the sound mode.
Activates One-Touch Play.
TV "/1 (on/standby) (page 48)
Turns on the TV or sets it to standby mode.
"/1 (on/standby) (pages 25, 37)
Turns on the system or sets it to standby mode.
F Playback operation buttons

H DISPLAY (pages 29, 31)

See Playback (page 29).

./> (previous/next)

Skip to the previous/next chapter, track, or file.

(replay/advance)

Briefly replay the current scenes for 10 seconds./Briefly fast forwards the current scenes for 15 seconds.
m/M (fast reverse/fast forward)
Displays the playback information on the TV screen. When the function is TV or SAT/ CABLE and digital signals are input via the DIGITAL IN jack, displays the stream information in the front panel display.

I Z (open/close)

SLEEP (page 48)
Fast reverse/fast forward the disc during playback. Each time you press the button, search speed changes. Activates slow-motion play when pressed for more than one second in pause mode. Plays one frame at a time when pressed in pause mode.

Sets the sleep timer.

SYSTEM MENU (pages 27, 32, 35, 37)

Enters the system menu.

FAVORITES
Displays the Internet contents added to the Favorites List. You can save 18 favorite Internet contents.

X (pause)

Pauses or re-starts playback.

Radio operation buttons

See Tuner (page 37).
PRESET +/ TUNING +/ G MUTING
Turns off the sound temporarily.

VOL +/ (page 37)

Adjusts the volume.

TV VOL +/

Adjusts the TV volume.
Switches the TVs input source between the TV and other input sources.
Step 1: Installing the System

Positioning the speakers

For the best possible surround sound, place all speakers at the same distance from the listening position (A). The distance can be between 0 to 23 feet (0.0 to 7.0 meters). If you cannot place the center speaker and surround speakers at the same distance as (A), place them within 23 feet (7.0 meters) of the listening position. Place the surround speakers to the rear of the listening position (B). The subwoofer can be placed anywhere in the room.
Subwoofer Front left speaker (L) Center speaker Front right speaker (R)
Surround left speaker (L)
Surround right speaker (R)
Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. Do not lean or hang on a speaker, as it may fall down.
To add the optional surround back speakers
You can enjoy 7.1 surround sound by purchasing the Wireless Surround Speaker Kit (WAHT-SBP2, optional). The optional product lineup differs depending on the area. For the position of the surround back speakers, refer the illustration below (C).
Surround back left speaker (L) (optional)
Surround back right speaker (R) (optional)
To use the surround back speakers, set [Surround Back] (page 46) in [Speaker Settings] to [Yes] while performing the Easy Setup (page 25).
Installing the speakers on a wall

Caution

Contact a screw shop or installer regarding the wall material or screws to be used. Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.
To install the speakers on a wall Getting Started
Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #.
Color tube Front left speaker (L): White Front right speaker (R): Red Center speaker: Green Surround left speaker (L): Blue Surround right speaker (R): Gray
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below.
4 mm (3/16 inch) 30 mm (1 3/16 inches) Hole on the back of the speaker

The system memorizes the last surround setting selected for each function. Whenever you select a function such as BD/DVD or TUNER FM, the surround setting that was last applied to the function is automatically applied again. For example, if you select BD/DVD with PRO LOGIC as the surround setting, then change to another function, and then return to BD/DVD, PRO LOGIC will be applied again.

Playing a Disc

For playable discs, see Playable Discs (page 65).
Delete unnecessary data in internal memory or USB memory. Select [Erase BD Data] in [Video] to delete unnecessary data. If you use USB memory as local storage, all saved data in the [BUDA/BUDB] folder is deleted.
Switch the input selector on your TV so that the signal from the system appears on your TV screen. Press Z, and place a disc on the disc tray.
Displaying the play information
You can check the playback information, etc., by pressing DISPLAY. The displayed information differs depending on the disc type and player status. Example: when playing a BD-ROM
Press Z to close the disc tray.
appears on the home menu and playback starts. If playback does not start automatically, select in the [Video], [Music], or [Photo] category, and press.
A The currently selected angle B Title number or name C The currently selected audio setting D Available functions ( subtitle) angle, audio,
Enjoying BONUSVIEW/BD-LIVE
Some BD-ROMs with BD-LIVE Logo* have bonus content and other data that can be downloaded for enjoyment.
E Playback information Displays disc type, play mode, repeat type, video codec, bit rate, playing status bar, playing time, total time F Chapter number G Output resolution/Video frequency
Prepare for BONUSVIEW/BD-LIVE.
Connect the unit to a network (page 23). Set [BD Internet Connection] to [Allow] (page 52).
Insert a BD-ROM with BONUSVIEW/ BD-LIVE.
The operation method differs depending on the disc. Refer to the operating instructions of the disc.
Playing from a USB Device
You can play video/music/photo files on the connected USB device. For playable types of files, see Playable Types of Files (page 66).

Enjoying an iPod

You can enjoy the sound and charge the battery of an iPod via the system.

Compatible iPod models

The compatible iPod models are as follows. Update your iPod with the latest software before using with the system.
Connect the USB device to the (USB) port on the unit.
Refer to the operating instructions of the USB device before connecting.

x CD/DATA CD (MP3 file)/DATA DVD (MP3 file)
Press AUDIO repeatedly until the desired signal appears in the front panel display.
[ Stereo]: The standard stereo sound. [ 1/L]: The sound of the left channel (monaural). [ 2/R]: The sound of the right channel (monaural).
MAIN: Sound of the main language will be output. SUB: Sound of the sub language will be output. MAIN/SUB: Mixed sound of both the main and sub languages will be output.
Enjoying Multiplex Broadcast Sound

(DUAL MONO)

You can enjoy multiplex broadcast sound when the system receives or plays a Dolby Digital multiplex broadcast signal.

Using the Sound Effect

To receive the Dolby Digital signal, you need to connect a TV or other component to the unit with a digital coaxial or optical cord (pages 19, 20). If your TV is compatible with the Audio Return Channel function (page 45), you can receive a Dolby Digital signal via an HDMI cable.

C/X/x/c,

Enjoying sound at low volume
You can enjoy sound effects or dialog, as you would in a movie theater, even at low volume. It is useful for watching movies at night.
Press X/x repeatedly until NIGHT MODE appears in the front panel display, then press or c. Press X/x to select a setting.
NIGHT ON: On. NIGHT OFF: Off.
When sound is output from the center speaker, this effect is more pronounced, as speech (movie dialog, etc.) is easy to hear. When sound is not output from the center speaker, the system optimally adjusts the volume.
Reinforcing bass frequencies
You can reinforce bass frequencies.
Press SYSTEM MENU. Press X/x repeatedly until D.BASS appears in the front panel display, then press or c. Press X/x to select a setting.
D.BASS ON: On. D.BASS OFF: Off.
Adjust the volume by pressing VOL +/.
If an FM program is noisy
If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve.

Listening to the Radio

You can enjoy radio sound with the systems speakers.
Press SYSTEM MENU. Press X/x repeatedly until FM MODE appears in the front panel display.

[On]: Shortens the startup time from standby mode. You can operate the system quickly after turning it on. [Off]: The default setting.

x [Auto Standby]

[Bright]: Bright lighting. [Dark]: Low lighting.

x [HDMI Settings]

By connecting Sony components that are compatible with the Control for HDMI function with an HDMI cable, operation is simplified. For details, see Using the Control for HDMI Function for BRAVIA Sync (page 43). [Control for HDMI] You can set the [Control for HDMI] function to on/off. [On]: On. You can operate mutually between components that are connected with an HDMI cable. [Off]: Off. [Audio Return Channel] This function is available when you connect the system and TV that is compatible with the Audio Return Channel function. [Auto]: The system can receive the digital audio signal of the TV automatically via an HDMI cable. [Off]: Off.
[On]: Turns on the [Auto Standby] function. When you do not operate the system for about 30 minutes, the system enters standby mode automatically. [Off]: Turns off the function.

x [Auto Display]

[On]: Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc. [Off]: Displays information only when you press DISPLAY.

x [Screen Saver]

[On]: Turns on the screen saver function. [Off]: Off.
x [Software Update Notification]
[On]: Sets the system to inform you of newer software version information (page 50). [Off]: Off.

x [Gracenote Settings]

[Volume Limit] When the System Audio Control (page 44) is activated, loud sound may be output depending on the volume level of the system. You can
[Auto]: Automatically downloads disc information when you stop playback of the disc. To download, the system must be connected to the network. [Manual]: Downloads disc information when you select [Playback History List] or [Information Display] in the options menu.

x [System Information]

You can display the systems software version information and the MAC address.

[Resetting]

x [Reset to Factory Default Settings]

[Network Settings]

You can make detailed settings for Internet and network.

x [Internet Settings]

You can reset the system settings to the factory default by selecting the group of settings. All the settings within the group will be reset.
x [Initialize Personal Information]
You can erase your personal information stored in the system.
Connect the system to the network beforehand. For details, see Connecting to the network (page 23). [View Network Status]: Displays the current network status. [Wired Setup]: Select this when you connect to a broadband router directly. [USB Wireless Setup]: Select this when you use a USB Wireless LAN Adapter. For more information, go to http://www.sony.com/bluraysupport/

No sound is output from the HDMI OUT jack. The left and right sounds are unbalanced or reversed. There is no sound from the subwoofer.
There is no digital sound from Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] the HDMI OUT jack when using (page 53). Also, set [Audio Return Channel] in [HDMI Settings] of [System the Audio Return Channel Settings] to [Auto] (page 53). function. Make sure that your TV is compatible with the Audio Return Channel function. Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function. The sampling frequency of the input stream is more than 48 kHz. The system does not output Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off] sound correctly when connected (page 45). to a set-top box. Severe hum or noise is heard. Check that the connecting cords are away from a transformer or motor, and at least 10 feet (3 meters) away from your TV set or a fluorescent light. Move your TV away from the audio components. Clean the disc. Select stereo sound by pressing AUDIO (page 34).
The sound loses stereo effect when you play a CD.
The surround effect is difficult to Check the surround setting (page 27). hear when you are playing a Check the speaker connections and settings (pages 17, 46). sound track of Dolby Digital, Depending on the BD/DVD, the output signal may not be the entire 5.1 channel. DTS, or MPEG audio. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format. The sound comes from the center Depending on the disc, the sound may come from the center speaker only. speaker only. No sound is heard from the center speaker. Check the speaker connections and settings (pages 17, 46). Check the surround setting (page 27). Depending on the source, the effect of the center speaker may be less noticeable. A 2 channel source is being played. Check the speaker connections and settings (pages 17, 46). Check the surround setting (page 27). Depending on the source, the effect of the surround speakers may be less noticeable. Check the wireless setting (page 24). A 2 channel source is being played.

The disc does not play.

File names are not displayed correctly.
The system can only display ISO 8859-1-compliant character formats. Other character formats may be displayed differently. Depending on the writing software used, the input characters may be displayed differently. Resume play has been selected. Press OPTIONS and select [Play from beginning], then press. The title or BD/DVD menu automatically appears on the TV screen.
A disc does not start playing from the beginning.
Playback does not start from the The resume point may be cleared from memory depending on the disc when resume point where you last you open the disc tray. stopped playing. you disconnect the USB device. you play other content. you turn off the unit. The system starts playing the disc automatically. Playback stops automatically. The BD/DVD features an auto playback function. Some discs may contain an auto pause signal. While playing such a disc, the system stops playback at the auto pause signal.
You cannot perform some Depending on the disc, you may not be able to perform some of the operations. functions such as stop or search. Refer to the operating instructions supplied with the disc. Messages do not appear on the TV screen in the language you want. In the Setup Display, select the desired language for the on-screen display in [OSD] in [System Settings] (page 53).
The language for the soundtrack/ Try using the BDs or DVDs menu. subtitle or angles cannot be Multi-lingual tracks/subtitles or multi-angles are not recorded on the BD or changed. DVD being played. The BD or DVD prohibits the changing of the language for the sound track/ subtitle or angles. The disc tray does not open and Try the following: 1 Press and hold N and Z on the unit for more than 5 you cannot remove the disc even seconds to open the disc tray. 2 Remove the disc. 3 Disconnect the AC power after you press Z. cord (mains lead) from the wall outlet (mains), then reconnect after several minutes. A disc cannot be ejected and TLK ON appears in the front panel display. Contact your Sony dealer or local authorized Sony service facility.
The Control for HDMI function Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] does not work. (page 53). Make sure that the connected component is compatible with the [Control for HDMI] function. Check the connected components setting for the Control for HDMI function. Refer to the operating instructions supplied with the component. If you change the HDMI connection, connect and disconnect the AC power cord (mains lead), or have a power failure, set [Control for HDMI] in [HDMI Settings] of [System Settings] to [Off], then set [Control for HDMI] to [On] (page 53). For details, see Using the Control for HDMI Function for BRAVIA Sync (page 43). Make sure that the connected TV is compatible with the System Audio Control No sound is output from the function. system and TV while using the System Audio Control function. For details, see Using the Control for HDMI Function for BRAVIA Sync (page 43).

Playable Discs

Blu-ray Disc DVD3)
Note on playback operations of a BD/DVD
Some playback operations of a BD/DVD may be intentionally set by software producers. Since this system plays a BD/DVD according to the disc contents the software producers designed, some playback features may not be available.
BD-ROM1) BD-R/BD-RE2) DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW CD-DA (Music CD) CD-ROM CD-R/CD-RW Super Audio CD
Note about double-layer BDs/ DVDs
The playback picture and sound may be momentarily interrupted when the layers switch.

1)Since

the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. Also, the audio output differs depending on the source, connected output jack, and selected audio settings. 2)BD-RE: Ver.2.1 BD-R: Ver.1.1, 1.2, 1.3 including organic pigment type BD-R (LTH type) BD-Rs recorded on a PC cannot be played if postscripts are recordable. 3) A CD or DVD disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions supplied with the recording device.
Region code (BD-ROM/DVD VIDEO only)
Your system has a region code printed on the rear of the unit and will only play a BD-ROM/ DVD VIDEO (playback only) labeled with identical region codes or ALL.
Discs that cannot be played
BDs with cartridge DVD-RAMs HD DVDs DVD Audio discs PHOTO CDs Data part of CD-Extras VCDs/Super VCDs Audio material side on DualDiscs A disc recorded in a color system other than NTSC, such as PAL (this system conforms to the NTSC color system).

Notes on discs

This product is designed to playback discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this product.

Playable Types of Files

File format Extensions
The system may not play high bit rate video files from a DATA CD smoothly. It is recommended to play high bit rate video files using a DATA DVD.

MPEG-1 Video/PS1).mpg,.mpeg,.m2ts, MPEG-2 Video/PS, TS1).mts MPEG4/AVC1) WMV91) AVCHD.mkv,.mp4,.m4v,.m2ts,.mts.wmv,.asf
MP3 (MPEG-1 Audio Layer III) AAC1)4) WMA9 Standard1)4) LPCM

.mp3.m4a.wma.wav

1)The 2)

.jpg,.jpeg,.jpe

system does not play files encoded with DRM. The system plays AVCHD-format files that are recorded via a digital video camera, etc. To watch AVCHD-format files, the disc with AVCHD-format files on it must be finalized. 3) The system does not play files encoded with Lossless, etc.
Some files may not play depending on the format, the encoding, or recording condition. Some files edited on a PC may not play. The system can recognize the following files or folders in BDs, DVDs, CDs and USB devices: up to folders in the 5th tree up to 500 files in a single tree Some USB devices may not work with this system. The system can recognize Mass Storage Class (MSC) devices (such as flash memory or an HDD) that are FAT-compatible and non-partitioned, Still Image Capture Devices (SICDs), and 101-key keyboards (front (USB) port only). To avoid data corruption or damage to USB memory or other devices, turn the system off before connecting or removing USB memory or other devices.

Supported Audio Formats

Audio formats supported by this system are as follows.
Format LPCM 2ch Function LPCM 5.1ch, LPCM 7.1ch Dolby Digital Dolby TrueHD, Dolby Digital Plus DTS DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS96/24 DTS-HD High Resolution Audio DTS-HD Master Audio
BD/DVD SAT/CABLE TV (DIGITAL IN)
a: Supported format. : Unsupported format.

Video Output Resolution

Output resolution differs depending on the [Output Video Format] setting in [Screen Settings] (page 50).
When [Output Video Format] is set to [HDMI] VIDEO OUT jack COMPONENT VIDEO OUT jacks HDMI OUT jack When [Output Video Format] is set to [Component Video] VIDEO OUT jack COMPONENT VIDEO OUT jacks HDMI OUT jack

Resolution setting

480i 480p 720p 1080i 1080p
480i 480i 480i 480i no picture
480i 480i 480i 480i unselectable
480i 480p 720p* 1080i* unselectable
* Protected contents on DVDs are output at 480p resolution.
When [Output Video Format] is set to [Video]
480i video signals are output from the VIDEO OUT or COMPONENT VIDEO OUT jack, and 480p video signals are output from the HDMI OUT jack.

Intermediate frequency

10.7 MHz

Specifications

Amplifier Section
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 3 ohms loads, both channels driven, from 180 - 20,000 Hz; rated 60 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milli watts to rated output. POWER OUTPUT (reference) Front L/Front R/Center: 167 W (per channel at 3 ohms, 1 kHz) Subwoofer: 165 W (at 3 ohms, 80 Hz) Inputs (Analog) AUDIO (AUDIO IN) Sensitivity: 450/250 mV Inputs (Digital) SAT/CABLE (COAXIAL), TV (OPTICAL) Supported formats: LPCM 2CH (up to 48 kHz), Dolby Digital, DTS

Speakers Front/Surround (SS-TSB101)
Speaker system Speaker unit Rated impedance Dimensions (approx.) Full range Bass reflex 55 mm 80 mm (2 1/4 in 3 1/4 in) cone type 3 ohms 75 mm 225 mm 71 mm (3 in 8 7/8 in 2 7/8 in) (w/h/d) 0.45 kg (1 lb) Full range Acoustic suspension 30 mm 60 mm (1 3/16 in 2 3/8 in) cone type 3 ohms 290 mm 49 mm 49 mm (11 1/2 in 1 15/16 in 1 15/16 in) (w/h/d) 0.28 kg (10 oz)

Mass (approx.)

Center (SS-CTB101)
Speaker system Speaker unit Rated impedance Dimensions (approx.)

Subwoofer (SS-WSB102)

Speaker system Speaker unit Rated impedance Dimensions (approx.) Subwoofer Bass reflex 180 mm (7 1/8 in) cone type 3 ohms 275 mm 405 mm 275 mm (10 7/8 in 16 in 10 7/8 in) (w/h/d) 7.5 kg (16 lb 12 oz) 120 V AC, 60 Hz On: 130 W Standby: 0.3 W (at the Power Saving mode) 430 mm 85 mm 335 mm (17 in 3 3/8 in 13 1/4 in) (w/h/d) incl. projecting parts 430 mm 85 mm 365 mm (17 in 3 3/8 in 14 3/8 in) (w/h/d) (incl. wireless transceiver) 4.7 kg (10 lb 6 oz)

Video Section

Outputs VIDEO: 1 Vp-p 75 ohms COMPONENT: Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p 75 ohms
HDMI OUT: Type A (19 pin)
Power requirements Power consumption
BD/DVD/Super Audio CD/CD System
Signal format system NTSC Dimensions (approx.) Type A (For connecting USB memory, memory card reader, digital still camera, and digital video camera) 500 mA Mass (approx.) 100BASE-TX Terminal PLL quartz-locked digital synthesizer

USB Section

(USB) port:

Maximum current:

LAN Section

LAN (100) terminal

Surround amplifier (TA-SA200WR)
Amplifier Section POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) With 3 ohms loads, both channels driven, from 120 - 20,000 Hz; rated 45 watts per channel minimum RMS power, with no more

Tuner Section

System FM tuner section Tuning range
87.5 MHz - 108.0 MHz (100 kHz step) Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced
than 1% total harmonic distortion from 250 milli watts to rated output. POWER OUTPUT (reference) 167 W (per channel at 3 ohms, 1 kHz) Rated impedance 3 - 16 General Power requirements 120 V AC, 60 Hz Power consumption On: 50 W Standby power consumption 0.9 W (standby mode) 0.13 W (turned off) Dimensions (approx.) 206 mm 60 mm 256 mm (8 1/8 in 2 3/8 in 10 1/8 in) (w/h/d) with the wireless transceiver inserted Mass (approx.) 1.3 kg (2 lb 14 oz)

An enhanced menu operation available on BDROMs. The pop-up menu appears when POP UP/MENU is pressed during playback, and can be operated while playback is in progress.
Progressive format (sequential scanning)
In contrast to the Interlace format, the progressive format can reproduce 50 - 60 frames per second by reproducing all scanning lines (525 lines for the NTSC system). The overall picture quality increases and still images, text and horizontal lines appear sharper. This format is compatible with the 525 or 625 progressive format.
S-AIR (Sony Audio Interactive Radio frequency)
Recent times have seen the rapid spread of BD/ DVD media, digital broadcasting, and other high-quality media. To ensure that the subtle nuances of these highquality media are transmitted with no deterioration, Sony has developed a technology called S-AIR for the radio transmission of digital audio signals with no compression, and has incorporated this technology into the EZWRT10/EZW-RT10A/EZW-T100. This technology transfers digital audio signals with no compression using the 2.4 GHz band range of ISM band (Industrial, Scientific, and Medical band), such as wireless LANs and Bluetooth applications.

24p True Cinema

Movies shot with a film camera consist of 24 frames per second. Since conventional televisions (both CRT and flat panels) display frames either at 1/60 or 1/50 second intervals, the 24 frames do not appear at an even pace. When connected to a TV with 24p capabilities, the player displays each frame at 1/24 second intervals the same interval originally shot with the film camera, thus faithfully reproducing the original cinema image.

Numerics

24p True Cinema 73 Dolby TrueHD 72 DTS 34, 72 DTS-HD 72 DVD 65 DVD Aspect Ratio 51 DVD Parental Control 53
OSD 53 Output Video Format 51
A/V SYNC 32 Attenuate - AUDIO 52 Audio 52 Audio DRC 52 Audio Output 52 Audio Return Channel 54 Audio Settings 51 Auto Calibration 45, 52 Auto Display 54 Auto Standby 54 AVCHD 71
Parental Control 72 Parental Control Area Code 53 Parental Control Settings 53 Password 53 Pause Mode 51 PhotoTV HD 72 Play information 29 Playable discs 65 Progressive format 73

Easy Setup 25, 55

FM MODE 37 Front panel 8 Front panel display 9

Gracenote Settings 54

BD Audio MIX Setting 51 BD Data Jack Selection 53 BD Hybrid Disc Playback Layer 53 BD Internet Connection 53 BD Parental Control 53 BD Remote Device Registration 55 BD/DVD Menu 52 BD/DVD Viewing Settings 52 BD/DVD-ROM 1080/24p Output 51 BD-LIVE 29 BD-R 71 BD-RE 71 Blu-ray Disc 71 BONUSVIEW 29 BRAVIA Internet Video 31

Quick Start Mode 54

BDV-E770W

Key Features 1000 watt 5.1 channel surround sound (167Wx5+165W)3
Blu-ray Disc Player Home Entertainment System
Wireless Rear Speakers minimize wire clutter BRAVIA Internet Video: Access movies, music, videos & more2 Wi-Fi Enabled & 3D Blu-ray Disc playback capability4 Quick Start/Load to watch movies faster than ever iPod music playback via front USB slot5 DLNA wireless streaming of photos, videos and music6 Access detailed movie information w/ Gracenote 7 Cross Search for easy searching of BRAVIA Internet Video8 Enjoy music, photos and video via front USB 9 slot Key Technologies
BRAVIA Internet Video Instantly stream a wide variety of movies, TV episodes, videos and
music from a large selection of entertainment apps including: Netflix, YouTube , Pandora, Slacker - the list goes on and on.2
Wireless Rear Speakers Enjoy 5.1 channel surround sound without needing to run wires
across the room to the rear speakers.
Wi-Fi Enabled Connect to your home wireless broadband network.
3D Blu-ray Disc Full HD 1080p playback Enjoy 3D Blu-ray Disc movies in Full HD 1080p. Also supports standard Bluray Disc movies in high definition and upscales DVDs to near HD quality.1
Quick Start/Quick Load Begin enjoying your entertainment faster than ever. Share Personal Entertainment (DLNA) Stream music, videos and photos from
compatible DLNA devices (like a PC) using your home network.6 the movies you are watching7.
Gracenote Metadata Service Instantly gives you access to detailed information about

Features

BD-Live (profile 2.0): Yes Bonus View (Profile1.1): Yes XMB (Xross Media Bar): Yes
5. 4. Requires home network with an 802.11 access point and DLNA enabled device such as a PC (not supplied). Firmware update required for DLNA functionality (available July 2010) 6. Requires Internet connectivity. Some disc titles may not be supported by the Gracenote service. 7. Requires internet connectivity and use of BRAVIA Internet Video functionality. 8. 1080p playback requires HDMI connector (sold separately) and compatible HDTV with 1080p display capability. 9. Firmware update required (available Summer 2010) 3D viewing requires 3D content, 3D-ready HDTV and HDMI connection. Other 3D accessories (including 3D glasses and emitter) may also be required for 3D viewing. 1080p playback requires HDMI connector (sold separately) and compatible HDTV with 1080p display capability. 2010 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. Non-metric weights and measures are approximate and may vary. Sony, BRAVIA, S-AIR, make.believe, their respective logos and the Full HD 1080p logo are trademarks of Sony. Blu-ray Disc is a trademark. iPhone and iPod touch are trademarks of Apple Computers, Inc. HDMI is a trademark of HDMI Licensing LLC. dts is a trademark of DTS, Inc. Dolby is a registered trademark of Dolby Laboratories. All other trademarks are trademarks of their respective owners.

Convenience

AM/FM Memory Presets: 20 FM Only

Specifications

General
Active/Passive: Passive Cabinet Material: Wood Cutoff Frequency: 20-200Hz Enclosure Type: Bass reflex Input Terminal: Push Type Model name: SS-TSB101 Rated Impedance: 3ohm Speaker System: 1 way Speaker Unit: 65mm Supplied Cable: 5m Front Grille/Material: Fixed / Clothe net Type: Micro Satellite Woofer Unit: 55mm x 80mm Magnetically Shielded: Yes Speaker Type: Slim BRAVIA Sync direct key: Yes Battery: AA / Manganese Pre-Program: Yes
BD: HD (24Hz) (24p True Cinema): Yes BD: HD (60Hz): Yes BD: HD 24Hz to 60Hz conversion: Yes BD: SD (60Hz): Yes Block Noise Reduction: Yes Component: Yes (480i/480p/720p/1080i) DVD Upscaling: Yes (HDMI 720p/1080i/1080p) Frame Noise Reduction: Yes HDMI Connection(s): Yes (480i/480p/720p/1080i/1080p(60Hz)) Mosquito Noise Reduction: Yes Video DAC (Component): 1080i,720p : 12bit/148.5MHz Video DAC (Y/C): 480i : 12bit/54MHz XMB (Xross Media Bar): Yes
Digital Amplifier: Yes (FL/FR/SL/SR/C/SW=24bit)

Inputs and Outputs

Optical Audio Input(s): 1(TV) Digital Media Port: Yes (1) HDMI Connection Output(s): 1 (Upscale to (1080p) for DVD) Analog Audio Input(s): 2 (AUDIO TV) Coaxial Audio Input(s): 1 (Sat/Cable) Component Video (Y/Pb/Pr) Output(s): 1 Composite Video Output(s): 1 D.C.A.C. (Auto Calibration): Yes (Mono Mic.) Headphone Jack: Yes (3.5mm @Surround Unit) Speaker Terminal: 2 (Front); 1 (Center); 2 (Surround); 1 (Subwoofer)
Power Consumption (in Standby): 0.3W Power Requirements: 120V AC, 60Hz Power Output: 1000W Total (RMS): Center 167W; Surround 167W; Woofer 165W, Front 60W
Band: FM External FM/AM Antenna: Yes (FM) Preset Channel: FM20 Tuning Range: FM:87.5 MHz-108.0 MHz (100 kHzstep)

Speaker

Speaker System: 1 way

Function

BD Read Capability: Yes (Playback) DVD Playback: Yes SAT/CABLE: Yes TV: Yes Tuner Type: Yes (FM)

Weights and Measurements

Dimensions (Approx.): 80 x 225 x 80mm Weight (Approx.): 0.5kg UPC Code: 027242780743 1. Connection speed of at least 2.5 Mbps recommended (10 Mbps for HD content). Video quality and picture size vary and are dependent upon broadband speed and delivery by content provider. Select content provided subject to change. Premium content may require additional fees and/or PC registration. 2. Transmits up to 164 feet. Signal and sound quality may vary. 3. Requires home network with an 802.11 access point (not supplied).
Please visit the Dealer Source for current information at www.sony.com/dealersource Last Updated: 03/16/2010
Sony Electronics Inc. 16530 Via Esprillo San Diego, CA 92127 1.800.222.7669 www.sony.com