H Lights up when the system is accessing the network. I Lights up when outputting 1920 1080p/24Hz video signals. J Lights up when the night mode is on. (105) K Lights up when the HDMI IN1 or 2 jack is correctly connected to HDCP (Highbandwidth Digital Content Protection) compliant device with HDMI or DVI (Digital Visual Interface) output. L Current sound format

Rear panel

BDV-IT1000ES

COMPONENT VIDEO OUT

Y PB/ CB PR/ CR

VIDEO OUT

IR REMOTE

OPTICAL

SAT/CABLE

DIGITAL IN

COAXIAL

S-VIDEO

PB / CB

PR / CR

EZW-RT10 ANTENNA

LAN(100)

SAT/CABLE COMPONENT VIDEO IN

DC5V 500mA MAX

EXTERNAL SPEAKER
FRONT R FRONT L CENTER WOOFER

AUDIO IN

A.CAL MIC

ECM-AC2

DMPORT

DC5V 700mA MAX

R AUDIO VIDEO

SAT/CABLE IN

BDV-IS1000
FRONT R FRONT L CENTER WOOFER WOOFER 1 2
A LAN (100) terminal (56) B COMPONENT VIDEO IN (SAT/CABLE) jacks (50) C COMPONENT VIDEO OUT jacks (48) D VIDEO OUT (VIDEO, S VIDEO) jacks (48) E HDMI IN1/2 jacks (50) F IR REMOTE (IN, OUT) (16) (BDVIT1000ES only) G DIGITAL IN (TV OPTICAL) jack (48) H DIGITAL IN (SAT/CABLE OPTICAL, COAXIAL) jacks (50) I EZW-RT10 slot (54)
J AM terminal (53) K FM 75 COAXIAL jack (53) L HDMI OUT jack (48) M DMPORT (DIGITAL MEDIA PORT) jack (50) N A.CAL MIC jack (60, 98) O SAT/CABLE IN (VIDEO, AUDIO R/L) jacks (50) P TV (AUDIO IN R/L) jacks (48) Q EXTERNAL slot (55) R SPEAKER jacks (45)

Surround amplifier

Front panel Rear panel

EZW-RT10

S-AIR ID
POWER/ON LINE PAIRING A B C

SPEAKER

PHONES

SURROUND SELECTOR

SURROUND SURROUND BACK
A PHONES jack (58) B POWER (ON/OFF) (58, 92) C POWER / ON LINE indicator (58, 89) D PAIRING indicator (92) E PAIRING (92)
F Wireless transceiver (EZW-RT10) slot (54) G S-AIR ID switch (58, 89) H SPEAKER L jack (45) I SPEAKER R jack (45) J SURROUND SELECTOR switch (58, 92)

Unpacking

Front speakers (2) Foot pads (thick 2, thin 2) Video cord (1)

Surround speakers (2)

Wall mounting brackets (top) (5)
Remote commander (remote) (1)

Center speaker (1)

Wall mounting brackets (bottom) (5)
R6 (size AA) batteries (2)
Calibration mic (1) Bracket covers (10) Subwoofer (1) Surround amplifier (1) Screws (5) Desktop stands (4) AM loop antenna (aerial) (1) Speaker cord cover (1)
Baffle covers (short 3, long 2)
FM wire antenna (aerial) (1)

Speaker cord holder (1)

Grilles (5)
Speaker cords (6, white/red/ blue/gray/green/purple)
Wireless transceivers for the unit (2)
Operating Instructions Basic connections (card)
Unpack the speakers, being careful not to touch the speaker units. Keep speakers away from one another. Speakers are magnetically attracted, may hit each other, and cause damage. Keep magnetic objects such as watches, magnetic card, etc., away from the speakers.

How to identify the speakers
Check the label on the speaker. Front left speaker (L): FRONT L (white) Front right speaker (R): FRONT R (red) Surround left speaker (L): SUR L (blue) Surround right speaker (R): SUR R (gray) Center speaker: CENTER (green)
Front and surround speakers
Thread the speaker cord through the hole in the bottom of the desktop stand.
Bottom of the desktop stand

Speaker cord

Remove the screw from the speaker.
The removed screw is used when attaching the desktop stand. Be sure not to lose the screw.

Front speaker

Surround speaker
When assembling, take care not to touch the speaker unit.
Connect the speaker cords to the speaker.
The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected. Use the speaker cords as follows: Front left speaker (L): White Front right speaker (R): Red Surround left speaker (L): Blue Surround right speaker (R): Gray Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation in the speaker terminals.

Connector

Color tube 3
# Check the polarity on the label.
Insert the speaker cords into the speaker terminal of the speaker as far as they will go. Ensure that the cords are secure by gently pulling on them one at a time.
When assembling, take care not to touch the speaker units.
When removing the speaker cords from the speaker terminals, pull out the speaker cords while pressing the white button on the speaker terminal with a tool such as a flathead screwdriver.
Attach the speaker to the desktop stand.
Be careful with the orientation of the desktop stand and speaker. Secure the speaker with the screw removed in Step 2.
Adjust the length of the cord. Screw
Take up slack in the speaker cord by pulling from the bottom of the desktop stand and secure the speaker cord by running it through the slot.
Attach the baffle cover to the speaker.
Use the baffle cover (short) for the front speaker, baffle cover (long) for the surround speaker. Press the ends of the baffle cover over the pin(s), then press down to flush fit the speaker front.
Front speaker Surround speaker J mark

Baffle cover (short)

Baffle cover (long)
Attach the grille to the speaker.
Be careful with the orientation of the grille.
Front speaker Surround speaker

Grille

SONY mark
When assembling, take care not to touch the speaker units. Be sure to use the speakers with their grilles attached. Do not push on the attached grille. It may cause damage to the speaker unit.

Thread the speaker cords through hole 3.
Reconnect the detached speaker cords, matching 3/# to the appropriate speaker terminals (1), and then push the lever down completely (2).
If it is difficult to push the lever down, use the wrench (supplied).
Reattach the rear cap using the wrench (supplied).
Secure the speaker to the bracket with the screw in Step 3 using hole 4.
Step 3: Connecting the System
See the connection diagram below, and read the additional information from 1 to 8 on the following pages.
Be sure to make connections securely to avoid hum and noise. When you connect another component with a volume control, turn up the volume of the other components to a level where sound is not distorted.
2 TV 3 DIGITAL MEDIA PORT adapter 3 Set-top box/digital satellite receiver, VCR, or PlayStation, etc.
4 AM loop antenna (aerial) 6 External memory 5 Wireless transceiver
4 FM wire antenna (aerial) 8 AC power cord (mains lead) 7 Network

HDMI S-AIR

1 Center speaker
1 Subwoofer 1 Front left speaker (L) 5 Wireless transceiver 1 Front right speaker (R)
8 AC power cord (mains lead)
1 Surround left speaker (L) :Signal flow
1 Surround right speaker (R)

1 Front left speaker (L)

1 Center speaker 1 Subwoofer 5 Wireless transceiver
1 Front right speaker (R)
1 Connecting the Speakers
Getting Started Front/center speakers and subwoofer for BDV-IT1000ES
When connecting speaker cords to the unit, insert the connector until it clicks.

PR / C R

To the subwoofer (purple) To the center speaker (green)

FRO R NT FRO L NT

R W O OF KE EA E N T E R C
To the front right speaker (R) (red) To the front left speaker (L) (white)
When connecting the speaker cords to the subwoofer, use the speaker cords (purple). Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation in the speaker terminals.

Rear of the subwoofer

Connector (purple) #

3 Color tube (purple)

Front/center speakers and subwoofer for BDV-IS1000

S-VIDE VIDEO O

Audio cord (not supplied) White Red
HDMI** cable (not supplied)
To the video input jack of the TV To the audio output jacks of the TV
To the HDMI IN jack of the TV
* If your TV accepts progressive format signals, make this connection. ** HDMI (High-Definition Multimedia Interface) If your TV has the HDMI jack, make this connection.
About the HDMI connection
If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable. If you connect a Sony TV that is compatible with the Control for HDMI function (page 95), operation is simplified (ex. ONE-TOUCH PLAY: With one touch of the button, the connected TV turns on and the input selector on the TV is switched to the system automatically). For details, see Using the Control for HDMI Function for BRAVIA Sync (page 95).
Be sure to use only an HDMI cable that bears the HDMI logo. When connecting the HDMI cable, make sure that the direction of jacks are the same.
To connect to a TV with DVI input
Use an HDMI-DVI converter cable (not supplied). The DVI jack does not accept audio signals; therefore, the sound is not output from a TV. Furthermore, you cannot connect the HDMI OUT jack to DVI jacks that are not HDCP compliant (e.g., DVI jacks on PC displays).
3 Connecting the other components
You can enjoy the connected component(s) using the six speakers of the system. Set-top box/digital satellite receiver, VCR, or PlayStation, etc. (without HDMI OUT jack): 1 Set-top box/digital satellite receiver or PLAYSTATION3, etc. (with HDMI OUT jack): 2 DIGITAL MEDIA PORT adapter: 3
Audio connection B Digital optical cord (not supplied) White Red
A Audio cord (not supplied)

2 HDMI cable

(not supplied)

L R AUDIO

B Digital coaxial cord (not supplied)

ABLE SAT/C

BL SAT/CA
To the audio output jacks of the component
To the HDMI OUT jack of the component
To the digital optical output jack of the component To the digital coaxial output jack of the component Rear panel of the unit (Ex. BDV-IT1000ES)
DC5V 500mA MAX 75 COAXIAL

Y P B/ CB PR/ CR

SAT/CABLE COMPONENT VIDEO IN EXTERNAL SPEAKER
Video connection A Video cord (not supplied)
B Component video cord (not supplied) Green Blue Red

DC5V A 700m MAX

IN ABLE SAT/C
BLE SAT/CA DEO IN ENT VI COMPON

The Scene Search function is available for titles longer than 100 seconds and shorter than 100 hours. Depending on the disc, this function may not work.
Displaying the playing time and play information
To view the playing time and remaining time in the front panel display

Press TIME repeatedly.

You can check the title information, including the video transmission rate, etc.
Press DISPLAY during playback.
Each time you press TIME while playing the disc, the display changes: 1yPlaying time of the current title 2 Remaining time of the current title Some displayed items may disappear after a few seconds.
The displayed information differs depending on the disc type and system status. Example: When playing a BD-ROM
English Dolby Digital Plus
A The current selected angle B Title number or name C The currently selected audio or subtitle setting D Available functions ( subtitle) angle/ audio/
E Playback information Displays Disc type/Play mode/Video codec/ Bit rate/Playing status bar/Playing time (Remaining time*) F Output resolution/Video frequency
* Displayed when you press TIME repeatedly.
You can also check the playback information in the front panel display. Press SUBTITLE, AUDIO, or ANGLE, and you can check each type of information.
Adjusting pictures for videos
Press OPTIONS during playback.
Press X/x to select [Video Settings], then press.
Set the picture setting of your TV to [Standard] before changing [Picture Quality Mode]. [Video Settings] is not available when the connected TV is set to Theater Mode (page 96). Depending on the disc or the scene being played, [FNR], [BNR], or [MNR] effects may be hard to discern.
The [Video Settings] screen appears.
Video Settings Select the item you want to change. Close Picture Quality Mode Standard FNR BNR MNR

Standard

[Picture Quality Mode]
Optimizes the picture settings for different lighting environments. [Standard] [Brighter Room] [Theater Room]
Reduces random noise appearing in the picture. [Off] [Auto]
Reduces mosaic-like block noise in the picture. [Off] [Auto]
Reduces minor noise around the picture outlines (mosquito noise). [Off] [Auto]
Press C/X/x/c to select or adjust the settings, then press.
To adjust any other items, repeat steps 3 and 4.
Adjusting the delay between the picture and sound

(A/V SYNC)

Playing a CD
When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound.

Press A/V SYNC.

A/V SYNC appears in the front panel display.
Press X/x to adjust the delay between the picture and sound.
C/X/x/c, HOME FUNCTION H m/M X MUTING x VOLUME +/ OPTIONS./>
You can adjust from 0 ms to 300 ms in 25 ms increments.
Depending on the input stream, A/V SYNC may not be effective.

Press FUNCTION repeatedly until BD/ DVD appears in the front panel display. Load a CD.
The Music Player screen appears.

Press H.

Music CD

Stereo

Current track number and elapsed time

To select a track

Press HOME. Press C/c to select [Music].

Details

[Play]
Plays the selected track. Plays the current track from the beginning. Plays the selected track from the beginning. Stops playback.
[Play from beginning] (during playback)

The music list appears.

Press X/x to select a track, then press H or.
[Play from beginning] (in stop mode) [Stop]
The system plays the selected track.
The point where you stopped playing (resume point) is cleared from memory when: You open the disc tray. You turn the system off.

Stop Pause

Resume play after pause X or H Start playback from the H point where you pressed x. Go to the next track Go back to the preceding track >. twice in a second. When you press. once, you can go to the beginning of the current track. MUTING. To cancel, press it again or VOLUME + to adjust the sound volume. A m or M during playback.
Each time you press TIME while playing the disc, the display changes: 1 t 2 t 3 t 4 t 1 t. 1 Playing time of the current track 2 Remaining time of the current track 3 Playing time of the disc 4 Remaining time of the disc
Stop play and remove the disc Fast reverse/fast forwards

Playing Photo Files

1) 2) 3)

Press X/x to select

, then press
The file list or folder list appears.
BD-REs/BD-Rs containing JPEG image files containing JPEG image files
2)DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs 3)CD-RWs/CD-Rs
containing JPEG image files

Thumbnails of files*

* Appears only when the file has thumbnail information.
Press X/x to select a file or folder, then press.
C/X/x/c, HOME FUNCTION OPTIONS
When you select a folder, press X/x to select a file in the folder, then press. The selected photo file is displayed.

Enjoying Surround Sound

You can enjoy surround sound simply by selecting one of the systems pre-programmed decoding modes. They bring exciting and powerful sound of movie theaters into your home.

DECODING MODE

Press DECODING MODE repeatedly until the desired decoding mode appears in the front panel display.
Display Decoding mode Effect

A.F.D. STD

AUTO FORMAT DIRECT STANDARD AUTO FORMAT DIRECT MULTI
Presents sound as it was recorded/encoded. Depending on the source, the speakers that output sound will vary. 2 channel source: Sound that is recorded in 2 channel (front left and right channel) is also assigned to the surround left and right channel. This mode outputs sound from the front left and right speakers, surround left and right speakers, and subwoofer. The center speaker does not output any sound. Multi channel source: Depending on the source, speakers that output the sound will vary. Performs Pro Logic decoding to the input signal and simulates surround sound from 2 channel sources. This mode outputs sound from all the speakers and subwoofer. Sound may not be output from all speakers depending on the source. Performs Pro Logic II movie mode decoding to the input signal and produces five full-bandwidth output channels from 2 channel sources. This setting is ideal for watching videos of overdubbed or old movies. This mode outputs sound from all the speakers and subwoofer. Sound may not be output from all speakers depending on the source.

A.F.D. MULTI

PRO LOGIC

Dolby Pro Logic

PLII MOVIE

Dolby Pro Logic II MOVIE

Display

Decoding mode

Effect

PLII MUSIC

Dolby Pro Logic II MUSIC
Performs Pro Logic II music mode decoding to the input signal and produces five full-bandwidth output channels from 2 channel sources. This setting is ideal for normal stereo sources such as a CD. This mode outputs sound from all the speakers and subwoofer. Sound may not be output from all speakers depending on the source. Performs Pro Logic IIx movie mode decoding to the input signal and produces 7.1 output channels. This setting is ideal for watching videos of overdubbed or old movies. Sound may not be output from all speakers depending on the source. Performs Pro Logic IIx music mode decoding to the input signal and produces 7.1 output channels. This setting is ideal for normal stereo sources such as a CD. Sound may not be output from all speakers depending on the source. Performs the DTS Neo:6 Cinema mode decoding to the input signal and produces 6.1 output channels. This setting is ideal for watching videos of overdubbed or old movies. This mode outputs sound from all the speakers and subwoofer. Sound may not be output from all speakers depending on the source. Performs the DTS Neo:6 Music mode decoding to the input signal and produces 6.1 output channels. This setting is ideal for normal stereo sources such as a CD. This mode outputs sound from all the speakers and subwoofer. Sound may not be output from all speakers depending on the source. Outputs the sound from the front left and right speakers and subwoofer. Multi channel surround formats are downmixed to 2 channels. Outputs the sound as surround from headphone left and right.

Calibrating the Appropriate Settings Automatically

[Auto Calibration]

D. C. A. C. (Digital Cinema Auto Calibration) can set the appropriate surround sound automatically.
Connect the calibration mic to the A.CAL MIC jack on the rear panel.
The system outputs a loud test sound when [Auto Calibration] starts. You cannot turn the volume down. Give consideration to children and neighbors. Make sure that the headphones are not connected to the surround amplifier. You cannot operate the following Steps with the headphones connected.
Press X/x to select [Audio Settings], then press. Press X/x to select [Auto Calibration], then press.
The confirmation display for [Auto Calibration] appears.
Press X/x to select [OK].
[Auto Calibration] starts. The system adjust the speaker setting automatically. Be quiet during the measurement.
Press X/x to select [OK] or [Cancel], then press. x The measurement is OK.
Disconnect the calibration mic, then select [OK]. The result is implemented.
x The measurement is not OK.
Before [Auto Calibration], make sure that the surround amplifier turns on and you install the surround amplifier in the appropriate location. If you install the surround amplifier in an improper location, such as another room, proper measurement will not be obtained. When you use the additional surround amplifier for the surround back speakers (optional), make sure that the additional surround amplifier turns on and you install the additional surround amplifier in the appropriate location. Avoid being in the measurement area and making noise during the measurement (about 1 minute), to avoid measurement failure. During the measurement, test signals are output from the speakers. The environment of the room in which the system is installed may affect measurements. Loud test sound is output when [Auto Calibration] starts. You cannot turn the volume down. Give consideration to children and neighbors. If an error message appears, follow the message, then select [OK]. An error message appears when: the headphones are connected to the surround amplifier. the calibration mic is not connected. front speakers are not correctly connected. surround speakers are not correctly connected. surround back speakers (optional) are not correctly connected. subwoofer is not connected.

Deactivating the Buttons on the Unit
(Child Lock) You can deactivate the buttons on the unit (except for "/1) for preventing misoperation, such as child mischief (child lock function).
Press x on the unit for more than 5 seconds.
Each time you press SLEEP, the minutes display (the remaining time) changes by 10-minutes. When you set the sleep timer, SLEEP flashes in the front panel display.
To check the remaining time

Press SLEEP once.

To change the remaining time
Press SLEEP repeatedly to select the desired time.
CHILD LOCK and ON appear in the front panel display. The child lock function is activated and the buttons on the unit are locked. (You can operate the system by using the remote.) To cancel, press x for more than 5 seconds so that CHILD LOCK and OFF appear in the front panel display.
When you operate the buttons on the unit while the child lock function is on, CHILD LOCK appears in the front panel display.
You can setup the following options.
Explanation [Network Update] (page 108)

Using the Setup Display

You can make various adjustments of items such as picture and sound. Select (Setup) on the home menu when you need to change the settings of the system.
Updates the software of the system.
[Video Settings] (page 109)
Makes the video settings according to the type of connecting jacks.
[Audio Settings] (page 111)
Playback settings stored in the disc take priority over the Setup Display settings and not all the functions described may work.
Makes the audio settings according to the type of connecting jacks.
[BD/DVD Viewing Settings] (page 112)

Press C/c to select

Network Update
Makes detailed settings for BD/ DVD playback.
[Photo Settings] (page 114)

[Setup].

Makes the photo-related settings.
[HDMI Settings] (page 114)

Makes the HDMI settings.

Setup Video Settings
[System Settings] (page 116)
Audio Settings BD/DVD Viewing Settings Photo Settings
Makes the system-related settings.
[Network Settings] (page 117)
Makes detailed settings for Internet and network.

[Easy Setup] (page 118)

Press X/x to select the setup category icon to change, then press.
Example: [Video Settings]
Re-runs the Easy Setup to make the basic settings.

[Resetting] (page 119)

Resets the system to the factory settings.
Setup TV Type Set the screen aspect ratio of your TV. Screen Format DVD Aspect Ratio Cinema Conversion Mode Original Letter Box Auto

x [Speaker Settings]

To obtain the best possible surround sound, set the speakers. For details, see Setting the Speakers (page 100).

x [Auto Calibration]

You can select the upper limit of sampling frequency in the audio signal for full sound adjustment. [On]: Sets to 48kHz. You can operate all of the sound control functions of the system. [Off]: Sets to 192kHz.
You can calibrate the appropriate settings automatically. For details, see Calibrating the Appropriate Settings Automatically (page 98).
[Fs Limit] works only for the BD/DVD, HDMI1, or HDMI2 function. In DTS96/24 format, some sound control functions do not work even if you set to [On].
[BD/DVD Viewing Settings]
You can make detailed settings for BD/DVD playback.

x [BD/DVD Menu]

If you select [Select Age Restriction], you can enter the age from [0] to [255] using C/ X/x/c and the number buttons.
To cancel the Parental Control setting
Select [No Restrictions].
If you forget the password, reset the system (page 119) and set a new password (see [Password] (page 113)). When you play discs which do not have the Parental Control function, playback cannot be limited on this unit. Depending on the disc, you may be asked to change the Parental Control level while playing the disc. In this case, enter your password, then change the level. When [255] is selected in [Select Age Restriction], the Parental Control setting is canceled.
You can select the default menu language for BD-ROMs or DVD VIDEOs. When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language by referring to Language Code List (page 139).

x [Audio]

You can select the default track language for BD-ROMs or DVD VIDEOs. When you select [Original], the language given priority in the disc is selected. When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language by referring to Language Code List (page 139).

x [Subtitle]

You can change the password. See [Password] (page 113).

x [DVD Parental Control]

Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. Scenes may be blocked or replaced with different scenes.
You can select the default subtitle language for BD-ROMs or DVD VIDEOs. When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language by referring to Language Code List (page 139).

x [BD Parental Control]

Enter your four-digit password using the number buttons. Press X/x to select [OK], then press. Press X/x to select a level, then press.
The lower the value, the stricter the limitation.

Terms and Conditions of Use and End User License Agreement
The Sony Blu-ray Disc player (Product) and associated software (Software) are provided and maintained by Sony Electronics Inc. and its affiliates (Sony). Sony also provides and maintains associated service (the Service), including any subsite accessible through the Services Internet homepage (the Site). The Software includes software embedded in the Product; stored on any media, bundled with the Product or otherwise provided by Sony; downloaded from the Site or otherwise made accessible or provided by Sony; any such media and any printed or on-line or electronic documentation associated with the Product and all updates and upgrades thereto. WHEN YOU ACCESS, BROWSE, OR USE THE SERVICE, PRODUCT, SOFTWARE, AND/OR SITE, YOU ACCEPT, WITHOUT LIMITATION OR QUALIFICATION, THE TERMS AND CONDITIONS SET FORTH HEREIN, SONYS PRIVACY POLICY POSTED ON THE SITE, AND ANY ADDITIONAL TERMS AND CONDITIONS OF USE SET FORTH IN ANY PORTION OF THE SERVICE AND SITE (COLLECTIVELY THE AGREEMENT). IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS AGREEMENT, SONY DOES NOT GRANT THE LIMITED RIGHTS HEREIN, AND PLEASE DO NOT USE THE SERVICE, PRODUCT, SOFTWARE, AND/OR SITE.
password or any other breach of security related to the Service, Site, and/or Software. Sonys Privacy Policy is posted on the Site and at http://products.sel.sony.com/SEL/legal/privacy.html, the terms of which are incorporated herein, and applies to your use of the Account, Product, Service, Site, and Software.

4. Automatic Update

The Software contains a functionality by which it is updated automatically when the Product is connected to a server belonging to Sony or to a third party designated by Sony. When you specify your intention not to use this automatic update functionality, or when the setting asking whether you wish to update automatically is activated and you decline to execute updates, it is assumed that you agree that the security functionality improvements, error corrections, other functional updates or any other changes offered by Sony through such updates would not be made to the Software and that your current and further use of the Software may be affected thereby. When the automatic update functionality described in the previous paragraph is activated, it is assumed that you agree (a) that the Software will be automatically updated as necessary to improve security functionality, to correct errors, to improve update functionality, or for other purposes, and (b) that this updating of the Software may be accompanied by the augmenting, modifying, or removing of functionality of the Software.
5. Additional Terms Governing Product Software

0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called this License). Each licensee is addressed as you. A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The Library, below, refers to any such software library or work which has been distributed under these terms. A work based on the Library means either the Library or any derivative work under
copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term modification.) Source code for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Librarys complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library.

14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
Yoyodyne, Inc., hereby disclaims all copyright interest in the library Frob (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice Thats all there is to it!
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Required statements for OpenSSL project used in this product
This product contains OpenSSL (including the library Original SSLeay), which Sony uses under license with the copyright holder. In compliance with a request by the copyright holder of said software, Sony conveys the following notice and asks that you read it. Package name: sony-target-grel-openssl-0.9.8g-020201.src.rpm

OpenSSL

Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/) 4. The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. 5. Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).

BDV-IS1000

Key Features Blu-ray Disc player with DVD upscaling up to 1080p 5 incredibly small speakers with subwoofer Dolby TrueHD and dts-HD sound fields S-AIR3 wireless capability with WAHT-SA10 receiver3 HDMI connectivity- 2 in / 1 out with Active Intelligence
Key Technologies Integrated single disc BD/DVD/CD Player Delivers incredible HD picture/audio quality. S-AIR Wireless capability lets you fill multiple rooms in your home with sound from the main unit3. Included WAHT-SA10 S-AIR wireless surround receiver Enables the system to deliver room-filling
surround sound without the hassle of running speaker wires across the room3
HDMI connectivity (2 in / 1 out) with Active Intelligence (repeater). Allows you to run other
HDMI sources through the BVD-IS1000 for simplicity and great sound
Xross media bar Graphical User Interface Provides intuitive and easy-to-understand operation
with four directional controls.
Precision Cinema HD via HDMI upscaler The player can convert standard-definition signal (480i)
of DVD and output at a 1080p video signal. Precision Cinema HD Upscale generates each pixel based on information from the original source, whether it is film or video and whether the pixel is in motion or still. It also helps compensate vertical edge and create smooth diagonal lines, so you can enjoy your own DVD libraries with detailed images.

Features

BD-Live (profile 2.0): (Upgrade) Bonus View (Profile1.1): Yes XMB (Xross Media Bar): Yes dts NEO:6 Decoding: Yes (Music/Cinema) dts 96/24 Decoding: Yes dts ES Decoding: Yes LPCM: Yes (2ch / 5.1ch / 7.1ch) Dolby Digital: Yes BRAVIA Sync direct key: Yes Pre-Program: Yes

Wireless S-Air

Power Output - Surround: 35W x 2 (FTC 0.7%THD), 50W x 2 (RMS 10%THD)

Sound Mode

Auto: Yes FS Limit: Yes (48KHz/192KHz) Movie: Yes Music: Yes News: Yes Sports: Yes X-Round: Yes

General Convenience

AM/FM Memory Presets: 20 FM - 10 AM

Center Speaker General

Enclosure Type: Closed Rated Impedance: 10ohm Type: Micro Sat (Golf Ball Size) Front Grille/Material: Fixed

System HDMI

Component to HDMI : Yes (SAT/CABLE) Composite to HDMI : Yes (SAT/CABLE, DMPORT) Video Signal Input (1080i): Yes (Decode to 1080i HDMI Video Signal output) Video Signal Input (480i/480p): Yes (Decode to 480p HDMI Video Signal output) Video Signal Input (720p): Yes (Decode to 720p HDMI Video Signal output) Deep Color: Yes x.v.Color : Yes

Inputs and Outputs

Analog Audio Input(s): 2 (SAT/CABLE, TV) Component Video (Y/Pb/Pr ) Input(s): 1 (SAT/CABLE) Component Video (Y/Pb/Pr) Output(s): 1 Composite Video Input(s): 1 (SAT/CABLE) Composite Video Output(s): 1 Headphone Input(s): Yes (3.5mm @Surround Unit) HDMI Connection Output(s): 1 (Upscale to (1080p) for DVD) Optical Audio Input(s): 2 (SAT/CABLE, TV) S-Video Output(s): 1 (BD/DVD only) HDMI Connection Input(s): 2 Speaker Terminal: 2 (Front); 1 (Center); 2 (Subwoofer-1 mid & 1 bass) D.C.A.C. (Auto Calibration): Yes (Mono Mic.) DIGITAL MEDIA PORT: Yes (1) Coaxial Audio Input(s): 1 (Sat/Cable)

Speaker

Speaker System: 1 way

Front Speaker General

Enclosure Type: Closed Rated Impedance: 10ohm Speaker System: 1 way Woofer Unit: W:16mm x H:120mm x 2pcs Front Grille/Material: Fixed Model Name: SS-ITF1 Speaker Unit: 1 Type: Micro Sat (Golf Ball Size)

Specifications

Video Decoder (A/D): 480i/576i : 10bit/54MHz; 720p/1080i : 10bit/74.25MHz

Surround Speaker General

Enclosure Type: Closed Front Grille/Material: Fixed Model Name: SS-IS15 Rated Impedance: 10ohm Speaker Unit: 1 Type: Micro Sat (Golf Ball Size)

Dimensions

Weight: BD Receiver: 22lbs (10.0kg); Front Speaker:0.2lbs ( 0.07kg); Center Speaker: 0.2lbs ( 0.07kg); Surround Speaker: 0.2lbs ( 0.07kg); SubWoofer:12.3lbs (9kg); Surround Amplifier: 5.7lbs (1.7kg) Measurements: BD Receiver: 16.9" x 4.9" x 14" (430 x 125 x 355mm) (EZWRT10 insert : 15.2" (385mm)); Front Speaker: 1.8" x 2.2" x 1.6" (45 x 55 x 40mm); Center Speaker: 1.8" x 2.2" x 1.6" (45 x 55 x 40mm); Surround Speaker: 1.8" x 2.2" x 1.6" (45 x 55 x 40mm); SubWoofer: 7.7" x 12.6" x 14.6" (196 x 350 x 372mm)
Power Output: 450W (RMS)- 50W x 5 (FTC 0.7%THD); 100W+100W (Sub Woofer) ; 395W (FTC 0.7% THD)- 35W x 5 (FTC 0.7% THD) & 75W x 2 (subwoofer)(FTC 0.7% THD)

Equalizer

Bass/Treble control: Bass/Mid/Treble Audio DRC: Yes Night mode: Plus Portable Audio Enhancer: Plus

Subwoofer General

Enclosure Type: Closed/Bass reflex Input Terminal: Screw/2 pairs Speaker System: 1 way Speaker Unit: 12cm/16cm Supplied Cable: 3.5m x 2 Model name: SS-ISW1 Active/Passive: Passive Cabinet Material: Wood Cutoff Frequency: 800Hz Front Grille/Material: Fixed Rated Impedance: 4ohm/4ohm

General Video

BD: HD (24Hz) (24p True Cinema): Yes BD: HD (60Hz): Yes BD: HD 24Hz to 60Hz conversion: Yes BD: SD (60Hz): Yes Block Noise Reduction: Yes Color: Black Component: Yes (480i/480p/576i/576p/720p/1080i) Frame Noise Reduction: Yes HDMI Connection(s): Yes (480i/480p/576i/576p/720p/1080i/1080p (60Hz)) Mosquito Noise Reduction: Yes Video DAC (Component): 1080i,720p : 12bit/148.5MHz Video DAC (Y/C): 480i,576i : 12bit/54MHz XMB (Xross Media Bar): Yes

Function

DVD Playback: Yes BD Read Capability: Yes SAT/CABLE: Yes Tuner Type: Yes (AM/FM) TV: Yes
Band: AM/FM External FM/AM Antenna: Yes (75ohm)/Yes Preset Channel: AM10/FM20 Tuning Range: AM: 530-1710 kHz (10k step), 531-1710 kHz (9k step); FM:87.5 MHz-108.0 MHz (100 kHzstep)

Supplied Accessories

S-Air Surround Ampilifier (WAHT-SA10) S-Air Transmitter (EZW-RT10 x 2) Wall Hanging Bracket (5) Video Cable (Composit x 1) Color: Black UPC Code: Requires HDMI connector (Supplied) and compatible HDTV. Certain circumstances may limit or prevent Blu-ray Disc media or DVD playback. Upscaled image quality may vary. 2 BRAVIA Sync for Theatre does not support camcorder. Supports select Sony Home Theater products. 3 Transmits up to approximately 164 feet. Signal and sound quality may vary. 4 Firmware update may be required. Internet access and external storage required (sold separately). 5 Requires HDMI connector (sold separately). 6 Digital Media Port and accessories required (iPod dock TDM-IP1 not supplied). Interoperability and compatibility among Bluetooth devices varies. 7 Requires HDMI connector. 8 iPod support is limited based upon which optional Digital Media Port is being used. The TDM-IP20 will support the following players: iPod touch, iPod classic, iPod Nano 1st, 2nd & 3rd generation, iPod 4th& 5th generation &iPod Mini. The TDM-IP 50 adds iPhone support as well. August 2008 Sony Electronics Inc. All rights reserved. Sony, BRAVIA, SAIR, 24p True Cinema, Precision Drive, Digital Cinema Auto Calibration and their respective logos are trademarks of Sony. XMB and xross media bar are trademarks of Sony Corporation and Sony Computer Entertainment Inc. Blu-ray Disc is a trademark. Dolby is a trademark of Dolby Laboratories. dts is a trademark of DTS, Inc. All other trademarks are properties of their respective owners.

Disc Based Player Format

CD-R/RW: Yes/Yes DVD+R (DL) (+VR): Yes DVD+RW (8cm) (+VR): Yes DVD+RW/+R (+VR): Yes/Yes DVD-R_(DL): Yes DVD-R (DL) (VR): Yes DVD-RAM: Yes DVD-RW-/R (VR): Yes/Yes DVD-RW/R (VR) with CPRM: Yes/Yes DVD-Video: Yes AVC-HD (8cm/12cm) (DVD+R/RW/-R/-RW): Yes BDAV/BD-R v1.0 (SL/DL): Yes/Yes BDAV/BD-RE v2.0 (SL/DL): Yes/Yes BDAV/BD-RE v2.0 /BD-R v1.0 (SL/DL) ARIB: Yes/Yes BDMV/BD-R v2.0 (SL/DL): Yes/Yes BDMV/BD-RE v3.0 (SL/DL): Yes/Yes BD-R/ RE (BDAV/BDMV): Yes/Yes BD-ROM (SL/DL): Yes CD (CD-DA): Yes DVD-RW/-R (8cm): Yes/Yes DVD-RW/-R (Video): Yes/Yes Hybrid Disc (BD/CD): Yes/Yes Hybrid Disc (BD/DVD): Yes/Yes Hybrid Disc (HDDVD/DVD): No/Yes JPEG: Yes Mixed Disc (BDAV/BDMV): No/Yes MPEG Audio: Yes
Power Requirements: 120V AC, 60Hz Power Consumption (in Standby): 0.3W Power Consumption: 100W

HDMI Audio

Dolby Digital bit-stream out: Yes Dolby Digital Plus bit-stream out: Yes Dolby TrueHD bit-stream out: Yes dts bit-stream out: Yes dts-HD High Resolution bit-stream out: Yes dts-HD Master Audio bit-stream out: Yes LPCM 2ch (192kHz/96kHz/48kHz) out: Yes/Yes/Yes LPCM 6ch (192kHz/96kHz/48kHz) out: Yes/Yes/Yes LPCM 8ch (96kHz/48kHz) out: Yes/Yes

On-Screen Display

Language: USA ENG, CAN FRA, LATIN ESP, LATIN PRT
Stand-by Mode: Yes (Normal / Quick Start)
A/V SYNC (Lip Sync): Yes (0ms - 300ms / 25ms step) Child Lock: Yes Dimmer: Yes (On/Off) Timer: Yes (Sleep) VACS: Yes

Amplifier Audio

Digital Amplifier: Yes (FL/FR/C/M/SW=32bit, SL/SR=24bit)

Mechanism

Tray Lock: Yes Type: 1disc Tray BD-Live (profile 2.0): (Upgrade) Bonus View (Profile1.1): Yes

Audio Formats

Dolby Pro Logic II: Yes (Music/Movie) Dolby Pro Logic IIX: Yes (Music/Movie) 2ch STEREO: Yes A.F.D. Multi: Yes A.F.D. Standard: Yes Dolby Digital EX Decoding: Yes dts Decoding: Yes

Remote General

Battery: AA / Manganese
Please visit the Dealer Network for current information at www.sony.com/dn Last Updated: 03/30/2009
Sony Electronics Inc. 16530 Via Esprillo San Diego, CA 92127 1.800.222.7669 www.sony.com