CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ TR640E/TR730E/TR840E/TR845E
CCD-TR311/TR311E/TR411E/TR412E/TR511E/ TR512E/TR640E/TR730E/TR840E/TR845E

RMT-708/717

AEP Model

SERVICE MANUAL

CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/TR640E/TR730E/TR840E/TR845E SERVICE MANUAL

Sony Corporation

CCD-TR411E/TR412E/TR511E/TR640E/TR840E/ TR845E

UK Model

CCD-TR411E/TR511E/TR640E/TR840E
East European Model North European Model Russian Model
CCD-TR411E/TR412E/TR511E/TR640E/TR840E

E Model

CCD-TR311/TR311E/TR511E/TR512E/TR730E

Hong Kong Model

CCD-TR311E/TR511E
Photo : CCD-TR840E : RMT-708

Australian Model

CCD-TR311E/TR511E/TR512E/TR840E

Tourist Model

CCD-TR311/TR311E

B MECHANISM

Chinese Model

CCD-TR311E/TR511E/TR512E

SPECIFICATIONS

Video camera recorder

System Video recording system 2 Rotary heads Helical scanning FM system Audio recording system Rotary heads, FM system Video signal CCD-TR311 : NTSC color, EIA standards CCD-TR311E/TR411E/TR511E/ TR512E/TR640E/TR730E/TR840E/ TR845E : PAL color, EIA standerds Usable cassette 8mm video format cassette CCD-TR311/TR311E/TR411E/TR412E/ TR511E/TR512E/TR640E/TR730E : standard 8 CCD-TR840E/TR845E : Hi8 or standard 8 Recording / Playback time (using 90 min. cassette) SP mode: 1 hour and 30 minutes LP mode: 3 hours Fastforward/rewind time (using 90 min. cassette) Approx. 5 min. Image device CCD (Charge Coupled Device) Viewfinder Electronic viewfinder CCD-TR311/TR311E/TR411E/TR412E/ TR511E/TR640E/TR840E/TR845E : Monochrome CCD-TR512E/TR730E : Color 113,578 (521 x 218)
For MECHANISM ADJUSTMENTS, refer to the 8mm Video MECHANICAL ADJUSTMENT MANUAL VII (9-973-801-11).
Color temperature Lens Input and output connectors Auto S video input/output Combined power zoom lens Minimum illumination* (CCD-TR840E/TR845E only) Filter diameter 1 7/16 in. (37 mm) CCD-TR311/TR311E/TR411E/TR412E : 4-pin mini DIN CCD-TR411E (AEP, UK) : 0.4 lux at F1.4 (Visible minimum low Luminance signal : 16 x (Optical), 32 x (Digital) light 0.2 lux) 1 Vp-p, 75 ohms, unbalanced CCD-TR412E (AEP) : CCD-TR511E/TR512E : CCD-TR311 : 16 x (Optical), 64 x (Digital) 0.4 lux at F 1.4 Chrominance signal : CCD-TR311/TR311E : CCD-TR640E/TR730E/TR840E/ 0.286 Vp-p, 75 ohms, unbalanced 16 x (Optical), 100 x (Digital) TR845E : 0.7 lux at F 1.4 CCD-TR311E/TR411E/TR412E/ CCD-TR411E (EE, NE, RU) : CCD-TR511E/TR512E/TR640E/ TR511E/TR512E/TR640E/TR730E/ 16 x (Optical), 160 x (Digital) TR730E/TR840E/TR845E : TR840E/TR845E : CCD-TR412E (EE, NE, RU) : 0 lux (in NightShot mode)** Chrominance signal : 16 x (Optical), 200 x (Digital) * Minimum illumination 0.3 Vp-p, 75 ohms, unbalanced CCD-TR511E (AEP, UK)/TR640E expresses the light level a camcorder Video input (AEP, UK)/TR840E (AEP, UK)/ requines to produce a picture. Visible (CCD-TR840E : AUS only)/output TR845E : 18 x (Optical), 72 x (Digital) minimum low light expresses the light Phono jack : CCD-TR511E (EE, NE, RU, E, HK, level to produce a visible signal. 1 Vp-p, 75 ohms, unbalanced AUS, CN)/TR512E/TR640E (EE, NE, **Object invisible for the dark can be RU)/TR730E/TR840E (EE, NE, RU, shot with infrared lighting. AUS) : 18 x (Optical), 220 x (Digital) Illumination range Focal distance CCD-TR311/TR311E/TR411E/ CCD-TR311/TR311E/TR411E/ TR412E/TR511E/TR512E : TR412E : 0.4 lux to 100,000 lux 3/16 - 2 5/8 in. (4.1 - 65.6 mm) CCD-TR640E/TR730E/TR840E/ CCD-TR511E/TR512E/TR640E/ TR845E : 0.7 lux to 100,000 lux TR730E/TR840E/TR845E : Recommended illumination 3/16 - 8 in. (4.1 - 73.8 mm) Continued on next page More than 100 lux When converted to a 35 mm still camera CCD-TR311/TR311E/TR411E/ TR412E : 1 9/16 - 24 7/8 in. (39.4 - 630 mm) CCD-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/TR640E/TR730E CCD-TR511E/TR512E : 1 9/16 - 28 in. (39.4 - 709 mm) CCD-TR640E/TR730E/TR840E/ TR845E : CCD-TR840E/TR845E 1 7/8 - 33 1/2 in. (47.2 - 850 mm)

hVIDEO CAMERA RECORDER HVIDEO CAMERA RECORDER

9-974-039-11

Personal A&V Products Company
98B0977-1 Printed in Japan 1998. 2 Published by Quality Engineering Dept. (Osaki East)

MICROFILM

4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For printed wiring boards.
b: Pattern from the side which enable seeing. (The other layer's patterns are not indicated.) Circled numbers refer to waveforms. Through hole is omitted. There are few cases that the part printed on diagram isnt mounted in this model. Chip parts. Transistor

C Q B E

CD-181 (CCD IMAGER) PRINTED WIRING BOARD
Ref No. CD-181 BOARD: 3,000 series

CD-181 BOARD (SIDE B)

CD-181 BOARD (SIDE A)
Measuring conditions voltage value and waveform.
The object is color bar chart of pattern box. Voltages and dc between ground and measurement points. Readings are taken with a digital multimeter (DC 10M). Voltages variations may be noted due to normal production tolerances. 1.Connection

Pattern box

For schematic diagrams.
All capacitors are in F unless otherwise noted. pF: F. 50 V or less are not indicated except for electrolytics and tantalums. Chip resistor are 1/16W unless otherwise noted. k : 1000, M : 1000k. Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, because it is damaged by the heat. Some chip part will be indicated as follows. Example C541 L452 22U 10UH TA A 2520
1-668-930Lens reference plane surface Imaging surface of CCD imager (IC401 on CD-181 board)
2.Adjust the distance so that the output waveform of Fig. a and the Fig. b can be obtain. Yellow Cyan Green White Magenta Red Blue
CD-181 BOARD C401 C403 C405 C406 C407 CN401 IC401 L401 Q402 R401 R404 R405 A-3 B-3 A-3 A-3 B-3 B-4 A-1 B-1 B-3 A-3 B-3 A-3

For Printed Wiring Boards. There are few cases that the part isn't mounted in this model is printed on this diagram. Chip transistor

Kinds of capacitor

Temperature chracteristics

External dimensions (mm)

Yellow Cyan Green White Magenta Red
Constants of resistors, capasitors, ICs and etc with XX indicate tha they are not used. In such cases, the unused circuits may be indicated. Parts with differ according to the model/destination. Refer to the mount table for each function. All variable and adjustable resistors have characteristic curve B, unless otherwise noted. Signal name XEDIT n EDIT PB/XREC n PB/REC 2 : non flammable resistor. 1 : fusible resistor. H : panel designation. A : B+ Line B : B Line J : IN/OUT direction of (+, ) B LINE. C : adjustment for repair. Circled numbers refer to waveforms.
A=B A B B A Fig. a (Video output terminal output waveform)
Electron beam scanned frame

CD-181BOARD CAMERA REC 1

VF-119 (COLOR EVF) CD-181 (CCD IMAGER)

7Vp-p H

IC401 CRT picture frame

CF-49 (CONTROL)

Note on the CCD imager replacement The CCD imager is not mounted for the already mounted CD-181 board supplied as the repair parts. When replacing the CD-181 board, remove the CCD imager from the old board and install on the new board. Perform all adjustments of the camera block when the CCD imager has been replaced. Handle the CCD imager with attention such as MOS IC as it may be broken by static electricity in the structure. Also, prevent the receiving light section from dust attached and strong light.
The components identified by mark !or dotted line with mark ! are critical for safety. Replace only with part number specified. When indicating parts by reference number, please include the board name.
Les composants identifis par une marque ! sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
Fig. b (Picture on monitor TV)

MA-311 (STEREO MIC)

DD-105 (POWER) PJ-81 (AV IN/OUT)

H 1.3Vp-p

CCD IMAGER

CD-181

SE-65 (STEADY SHOT) PRINTED WIRING BOARD
Ref No. SE-65 BOARD: 3,000 series

SE-65 BOARD (SIDE B)

SE-65 BOARD (SIDE A)

SE-65 BOARD C451 C452 C453 C454 C455 C456 C457 C458 C459 C460 C461 C462 C463 C464 C465 C466 C467 C468 C469 C470 C471 CN451 D451 D452 IC451 J451 C-6 D-3 B-6 E-6 C-3 C-3 C-2 C-3 C-6 E-6 C-6 C-6 C-3 C-6 C-3 C-6 A-2 A-6 A-2 A-6 B-3 A-3 A-6 A-6 C-6 A-8 B-3 B-2 A-3 A-2 C-6 D-3 D-3 C-6 D-6 C-3 C-3 C-6 C-6 C-3 C-6 B-3 B-3 B-3 D-3
L451 L452 L453 L454 R451 R452 R453 R454 R455 R456 R457 R458 R459 R460 R461 R462 R463 SE451 SE452

1-668-93209

LB-54 (BACK LIGHT)

VF-120 (COLOR EVF)

For Printed Wiring Boards. There are few cases that the part isn't mounted in this model is printed on this diagram. Chip diode
VC-195 CAMERA, Y/C PROCESSOR, IN/OUT, REC/PB HEAD AMP, SERVO/SYSTEM CONTROL, SERVO, AUDIO, MODE CONTROL

SE-65 (STEADY SHOT)

STEADY SHOT
For schematic diagrams. Refer to page 413 for Printed Wiring Board.

VC-195 BOARD (1/9) 1

CAMERA REC
2.3Vp-p NTSC : 28.636 MHz PAL : 28.375 MHz
2.3Vp-p NTSC : 14.32 MHz PAL : 14.18 MHz

11 , 12

IC, 26

IC, 31

3Vp-p H

IC501 44

3Vp-p V

IC501 45

3.2Vp-p

0.14usec

1.3Vp-p H

IC502 26

0.4Vp-p H

IC502 36

CAMERA (1)

VC-195 (1/9)

CAMERA (2)

VC-195 (2/9)

VC-195 BOARD (3/9) 10
0.34Vp-p H NTSC:3.58 MHz PAL:4.43 MHz

3.1Vp-p

IC202 66

0.84Vp-p H

3Vp-p 4V

IC202 71

0.5Vp-p H

3Vp-p 2V

IC202 13

IC202 72

IC202 16

IC202 80

0.18Vp-p H

IC202 23

IC202 81

3.2Vp-p 7.16 MHz

IC202 26

0.9Vp-p H

IC202 33

IC201 19

0.4Vp-p V

IC202 40

IC201 20

3.5Vp-p

IC202 60

IC202 61

Y/C PROCESSOR

VC-195 (3/9)

VC-195 BOARD (4/9) CAMERA REC 30

0.46Vp-p H

0.32Vp-p H

1.4Vp-p H

IC, 64

1.8Vp-p H

IC, 60

ICIC151 62

(2.1Vp-p) (1.6Vp-p)

IN/OUT

VC-195 (4/9)

VC-195 BOARD (5/9) 35

0.3Vp-p H 4.12 MHz

0.3Vp-p 2V

5 TRIG : IC001 21

IC001 11

IC001 17

2.9Vp-p 2V

IC001 21

IC, 48

0.18Vp-p V

IC001 61

IC001 62

IC701 16

REC/PB HEAD AMP

VC-195 (5/9)

VC-195 BOARD (6/9) CAMERA REC 46

1.7Vp-p 20 MHz

IC402 47

IC402 48

IC, 57

3Vp-p 13usec

IC402 68

IC402 69

IC402 70

3Vp-p 1.2msec

IC402 115

3Vp-p 2.8msec

IC402 116

IC402 117

SERVO/SYSTEM CONTROL

VC-195 (6/9)

VC-195 (7/9)
VC-195 BOARD (7/9) CAMERA REC 56

1.2Vp-p

VC-195 BOARD (8/9) 59

2.9Vp-p

5.6msec

1 , 2 , 29

IC301 21

0.4Vp-p

IC451 11

IC301 24

0.36Vp-p

2.8msec V

IC451 18

IC301 29

0.26Vp-p NTSC:3.58 MHz PAL:4.43 MHz

IC301 32

VC-195 (8/9)

VC-195 BOARD (9/9) 68

1.5Vp-p 20 MHz

IC604 41

2.6Vp-p 32 kHz

IC604 52

MODE CONTROL

VC-195 (9/9)

PJ-81 (AV IN/OUT) PRINTED WIRING BOARD
Ref No. PJ-81 BOARD: 3,000 series

PJ-81 BOARD (SIDE B)

PJ-81 BOARD C101 C102 C103 C104 C105 C106 C107 C108 C109 C110 C111 C-4 C-4 C-3 C-3 C-1 C-2 C-1 C-1 C-5 C-5 C-1 C-2 C-1 C-3 C-4 C-5 C-5 C-5 A-3 C-3 C-3 C-2 C-2 C-5 C-4 C-4 C-4 C-4 C-4 C-4 C-5 C-5 C-5 C-3
CN101 D101 D102 D103 D105 D106 D107 J101 L101 L102 L103 L104

PJ-81 BOARD (SIDE A)

Q101 Q102 R101 R102 R103 R104 R105 R106 R107 R108 R109

1-668-93112 22

VF-119 (COLOR EVF)
For Printed Wiring Boards.

CD-181 (CCD IMAGER)

There are few cases that the part isn't mounted in this model is printed on this diagram.

Chip diode

AV IN/OUT
MA-311 (STEREO MIC) PRINTED WIRING BOARDS
Ref No. MA-311 BOARD: 3,000 series

MA-311 BOARD (SIDE B)

MA-311 BOARD (SIDE A)

1-668-934-

MA-311 BOARD C301 C302 C303 C304 C305 C306 C321 C322 C323 C324 C325 C326 C327 C328 C329 C330 C331 C332 C333 C334 C335 C336 C337 C338 C339 C340 C341 C342 C343 A-3 A-3 A-1 A-2 A-2 A-1 B-5 B-5 B-5 B-6 B-6 B-6 B-5 B-6 B-6 C-7 B-6 B-6 C-3 C-3 C-3 D-3 C-4 C-3 C-3 C-5 C-3 C-4 C-3 C344 C345 C346 C347 C348 C349 C350 C351 C352 C353 C354 C355 C356 C357 C358 C359 C360 C361 C362 C363 C364 C365 C366 C367 C368 C369 C370 C371 C372 B-5 C-5 D-4 C-3 D-3 D-3 D-3 D-3 D-3 D-3 D-5 D-5 C-2 C-2 D-5 C-5 C-2 C-2 D-5 D-6 D-6 D-5 D-5 D-6 D-6 C-6 D-6 C-2 D-3 C373 C374 C375 C376 C377 C378 CN301 CN302 CN303 D301 D302 D303 D305 D307 D308 D309 D322 D323 IC301 IC321 IC322 J310 L301 D-5 B-6 D-5 B-7 B-6 C-6 B-2 B-3 B-1 A-6 A-6 B-5 B-7 D-5 B-7 A-5 B-5 B-6 A-7 C-6 D-3 B-5 B-1 Q301 Q302 Q303 Q304 Q305 Q321 Q322 R301 R302 R303 R304 R305 R306 R307 R308 R309 R310 R311 R312 R313 R314 R315 R321 R322 R323 R324 R325 R326 A-5 A-1 A-2 B-3 A-1 B-5 B-6 A-5 A-1 A-2 A-3 A-2 B-7 B-1 D-3 D-3 B-3 A-1 B-5 B-5 A-1 A-1 C-5 B-3 A-4 C-5 B-5 B-5 R327 R328 R329 R330 R331 R332 R333 R334 R335 R336 R337 R338 R339 R340 R341 R342 R343 R344 R345 R346 R347 R348 R349 R350 R351 R352 R353 R354 R355 B-5 B-5 B-5 B-6 B-6 B-6 B-6 B-6 C-4 C-4 C-3 D-3 C-5 C-3 C-5 C-3 C-5 C-5 D-3 C-3 D-3 D-5 D-5 D-5 D-5 C-2 D-5 D-5 D-5 R356 R357 R358 R359 R360 R361 R362 R363 R364 R365 R366 R367 R368 S301 S302 S303 D-6 D-6 D-5 C-2 C-6 D-5 D-6 D-5 D-5 C-5 C-5 C-5 D-5 D-4 D-2 C-1

CONTROL SWITCH BLOCK, STEREO MIC

FK-8500, SS-8500 MA-311

STEREO MIC

MA-311

CF-49 BOARD CAMERA REC 1

2.9Vp-p 24.48 kHz

CONTROL
VF-99 (B/W EVF (B/W EVF MODEL)) PRINTED WIRING BOARD
Ref No. VF-99 BOARD: 10,000 series

VF-99 BOARD (SIDE A)

VF-99 BOARD (SIDE B)
VF-99 BOARD C901 C902 C903 C904 C905 C906 C907 C908 C909 C910 C911 C912 C913 C914 C915 C916 CN901 CN902 D901 D903 D-3 C-3 C-1 C-1 D-3 D-1 D-2 C-3 C-3 B-3 B-3 B-3 D-1 A-3 A-3 B-3 D-3 C-1 D-1 A-3 D-1 B-3 C-3 A-1 C-3 C-3 C-3 C-3 C-3 C-3 D-2 C-3 C-3 C-3 C-1 C-1 C-1 C-1 D-3 D-1 C-2 C-2 B-2 D-2 D-2 C-3 R919 R920 R921 R922 R923 R924 R925 R926 R927 R928 R928 RV903 RV904 T901 TH901 W901 B-3 C-3 B-3 A-3 A-3 B-3 B-3 A-3 C-1 C-1 D-2 A-2 A-1 B-1 C-2 B-1
IC901 L901 L902 L903 Q901 Q902 Q903 Q904 R901 R902 R903 R904 R905 R906 R907 R908 R909 R910 R911 R912 R913 R914 R915 R916 R917 R918

1-660-35709

For Printed Wiring Boards. This board is four-layer print board. However, the patterns of layers 2 to 3 have not been included in the diagram. There are few cases that the part isn't mounted in this model is printed on this diagram.

VF-99 BOARD CAMERA REC 1

1Vp-p H

Chip transistor C

IC901 11

2.2Vp-p H

VF-99 (B/W EVF)

IC901 13

B/W EVF

VF-99 (B/W EVF MODEL)

VF-119 (COLOR EVF (COLOR EVF MODEL)) PRINTED WIRING BOARD
Ref No. VF-119 BOARD: 10,000 series
VF-119 BOARD CAMERA REC 1

VF-119 BOARD (SIDE B)

VF-119 BOARD (SIDE A)

IC5401 14

7.2Vp-p

IC5401 20

7.5Vp-p 2H

IC5401 22

7.6Vp-p 2H

IC5401 24

1-668-94211

IC5404 18

VC-119 BOARD C5401 C5402 C5403 C5404 C5405 C5406 C5407 C5408 C5409 C5410 C5411 C5413 C5415 C5416 C5417 C5418 C5419 C5420 C5421 C5422 C5423 C5424 C5427 C5428 C5429 CN5401 CN5402 C-2 B-2 A-3 B-3 B-3 B-3 C-3 C-3 B-4 C-4 C-4 C-3 C-3 B-4 B-1 B-2 B-1 B-1 B-1 A-2 A-2 A-1 A-4 A-1 A-1 B-1 A-4 B-1 B-3 C-4 A-1 C-2 C-3 A-2 B-1 B-4 C-1 C-2 C-1 C-1 C-1 C-2 A-2 A-2 C-1 C-2 R5410 R5411 R5412 R5414 R5414 R5415 R5416 R5417 R5418 R5418 R5419 R5420 R5421 R5422 R5423 R5424 R5425 R5426 R5427 R5428 R5429 R5430 R5431 R5432 R5433 R5434 R5435 R5436 R5437 R5438 R5439 R5440 R5441 R5444 R5445 R5446 R5447 R5448 R5449 R5452 R5456 R5457 R5458 R5460 R5464 R5468 R5469 R5470 R5471 R5472 C-1 B-2 B-2 C-2 C-2 B-2 C-1 B-3 B-3 C-2 C-1 C-1 C-1 C-1 A-3 C-1 C-1 C-1 C-2 C-2 C-1 C-1 B-2 B-2 C-2 C-2 B-2 B-2 B-2 B-2 B-2 C-2 C-2 B-1 B-1 B-1 B-1 B-1 B-2 B-2 A-4 A-4 A-4 A-1 A-1 A-2 A-4 B-1 B-4 C-2

3Vp-p 7.852 kHz

For Printed Wiring Boards. This board is four-layer print board. However, the patterns of layers 2 to 3 have not been included in the diagram. There are few cases that the part isn't mounted in this model is printed on this diagram. Chip transistor

IC, 21

IC5404 22

3.4Vp-p 1.84 MHz

IC, 24
D5401 IC5401 IC5402 IC5404 L5401 L5402 L5403 L5404 L5405 Q5401

2.7Vp-p

11.06 MHz

IC5404 41

R5401 R5402 R5403 R5404 R5405 R5406 R5407 R5408 R5409

IC5404 45

COLOR EVF

VF-119 (COLOR EVF MODEL)

VF-120 BOARD CAMERA REC 1

2.4Vp-p H

IC5301 4

12Vp-p H

IC5301 15

COLOR EVF, BACK LIGHT

VF-120, LB-54 (COLOR EVF MODEL)
DD-105 BOARD CAMERA REC 1

0.76Vp-p 507 kHz

0.76Vp-p 506 kHz

IC801 64

DD-105