Reviews & Opinions
Independent and trusted. Read before buy Sony CD-X-gt220!

Sony CD-X-gt220

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sony CDX-GT220, size: 1.7 MB
Related manuals
Sony CDX-GT220 Annexe 1
Sony CDX-GT220 Installation Guide
Sony CDX-GT220 Annexe 2
Sony CDX-GT220 Annexe 7
Sony CDX-GT220 Annexe 6

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony CD-X-gt220About Sony CD-X-gt220
Here you can find all about Sony CD-X-gt220 like manual and other informations. For example: review.

Sony CD-X-gt220 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony CD-X-gt220 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony CD-X-gt220 photo ]

Video review

My new system

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 3. Page 1 of 1. Average Rating:
kingt36 3:25pm on Monday, November 1st, 2010 
Great I bought this product for myself to fit into my Nissan Micra ready for when I passed my driving test. It works great. Sony CDX Excellent buy! Easy to install; easy to use; good sound quality for in-car; looks good. I would recommend this product.
willfarnaby 2:11pm on Tuesday, May 25th, 2010 
Works reasonably well This radio was easy to install but does not have connections for steering column controls.
stevef 3:05am on Monday, March 22nd, 2010 
super service arrived very quickly, easy to fit,very full instructions,usual Sony quality,very good operation. All in all very pleased.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

3-215-427-12 (1)

FM/AM Compact Disc Player
Operating Instructions Mode demploi

Owners Record

The model and serial numbers are located on the bottom of the unit. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. Serial No.
To cancel the demonstration (DEMO) display, see page 9. Pour annuler laffichage de dmonstration (DEMO), reportez-vous la page 10.
CDX-GT320 CDX-GT32W CDX-GT220 CDX-GT22W CDX-GT120

2007 Sony Corporation

CDX-GT320/GT32W only
For installation and connections, see the supplied installation/connections manual.

Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
The HD Radio Ready logo indicates that this product will control a Sony HD RadioTM tuner (sold separately). For HD RadioTM tuner operation, please refer to the HD RadioTM tuner Operating Instructions. The HD Radio Ready logo is a registered trademark of iBiquity. HD RadioTM is a trademark of iBiquity Digital Corp. The SAT Radio Ready logo indicates that this product will control a satellite radio tuner module (sold separately). Please see your nearest authorized Sony dealer for details on the satellite radio tuner module. SAT Radio, SAT Radio Ready, the SAT Radio and SAT Radio Ready logos and all related marks are trademarks of Sirius Satellite Radio Inc. and XM Satellite Radio Inc.
CDX-GT320/GT32W/GT220/GT22W only
Microsoft, Windows Media, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Warning if your cars ignition has no ACC position Be sure to set the Auto Off function (page 9). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain. If you do not set the Auto Off function, press and hold (OFF) until the display disappears each time you turn the ignition off.
CAUTION The use of optical instruments with this product will increase eye hazard.
For the state of california, USA only
Perchlorate Material special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate

Table of Contents

About this manual. 4 Welcome !. 4

Additional Information

Precautions. Notes on discs. Playback order of MP3/WMA files (CDXGT320/GT32W/GT220/GT22W only). About MP3 files (CDX-GT320/GT32W/ GT220/GT22W only). About WMA files (CDX-GT320/GT32W/ GT220/GT22W only). Maintenance. Removing the unit. Specifications. Troubleshooting. Error displays/Messages. 15 16

Getting Started

Resetting the unit (CDX-GT320/GT32W only). 5 Preparing the card remote commander (CDXGT320/GT32W only). 5 Setting the clock. 5 Detaching the front panel. 5 Attaching the front panel. 5
Location of controls and basic operations
Main unit. 6 Card remote commander RM-X151 (CDX-GT320/GT32W only). 6
Display items. 8 Repeat and shuffle play. 8
Storing and receiving stations. 8 Storing automatically BTM. 8 Storing manually. 8 Receiving the stored stations. 8 Tuning automatically. 8

Other functions

Changing the sound settings. 9 Adjusting the sound characteristics BAL/ FAD/SUB. 9 Customizing the equalizer curve EQ3. 9 Adjusting setup items SET. 9 Using optional equipment. 10 Auxiliary audio equipment. 10 CD/MD changer (CDX-GT320/GT32W only). 10 Card remote commander RM-X114 (for CDX-GT220/GT22W). 11

About this manual

This manual contains instructions for the CDX-GT320, GT32W, GT220, GT22W and GT120. The following chart shows the main differences between these models. Check your model name, and refer to the difference indications in each section of this manual.
GT320 GT32W Reset button MP3/WMA playback CD/MD changer control Card remote commander available GT220 GT22W GT120

Welcome !

Thank you for purchasing this Sony Compact Disc Player. You can enjoy your drive with the following functions. CD playback You can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA files (page 13)*1).
Type of discs CD-DA Label on the disc

z z z z

(supplied)

(option)

MP3*1 WMA*1
Radio reception You can store up to 6 stations per band (FM1, FM2, FM3, AM1 and AM2). BTM (Best Tuning Memory): The unit selects strong signal stations and stores them. Sound adjustment EQ3 stage2: You can choose any one of 7 preset equalizer curves. Optional device operation*2 You can also control optional device, such as CD/MD changers, etc. Auxiliary equipment connection An AUX input jack on the front of the unit allows connection of a portable audio device.
*1 CDX-GT320/GT32W/GT220/GT22W only *2 CDX-GT320/GT32W only
Getting Started Resetting the unit (CDX-GT320/ GT32W only)
Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ball-point pen.

To display the clock, press (DSPL). Press (DSPL) again to return to the previous display.
Detaching the front panel
You can detach the front panel of this unit to prevent theft.

Caution alarm

If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used.
RESET button Note Pressing the RESET button will erase the clock setting and some stored contents.
Press (OFF). The unit is turned off. Press , then pull it off towards you.
Preparing the card remote commander (CDX-GT320/GT32W
Before using the card remote commander for the first time, remove the insulation film.
Notes Do not drop or put excessive pressure on the front panel and display window. Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray.
Attaching the front panel
Tip For how to replace the battery, see Replacing the lithium battery of the card remote commander on page 13.
Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks.

Setting the clock

The clock uses a 12-hour digital indication.
Press and hold the select button. The setup display appears. Press the select button repeatedly until CLOCK-ADJ appears. Press (SEEK) +. The hour indication flashes. Rotate the volume control dial to set the hour and minute. To move the digital indication, press (SEEK) /+. Press the select button. The setup is complete and the clock starts.
Note Do not put anything on the inner surface of the front panel.

Main unit

PUSH SELECT

SOURCE

REP SHUF PAUSE

9 q; qa qs qd qf

Card remote commander RM-X151 (CDX-GT320/GT32W only)

w; wa qs ws

This section contains instructions on the location of controls and basic operations. For details, see the respective pages. For optional device (CD/MD changer, etc.) operation, see Using optional equipment on page 10. The corresponding buttons on the card remote commander control the same functions as those on the unit. A OFF button To power off; stop the source. B EQ3 (equalizer) button page 9 To select an equalizer type (XPLOD, VOCAL, EDGE, CRUISE, SPACE, GRAVITY, CUSTOM or OFF). C Volume control dial/select button page 9 To adjust volume (rotate); select setup items (press and rotate). D SOURCE button To power on; change the source* (Radio/CD/ AUX). E Disc slot Insert the disc (label side up), playback starts. F Display window G AUX input jack page 10 To connect a portable audio device. H Z (eject) button To eject the disc. I (front panel release) button page 5
J DSPL (display)/SCRL (scroll) button (CDX-GT320/GT32W/GT220/GT22W) page 8 To change display items (press); scroll the display item (press and hold). DSPL (display) button (CDX-GT120) page 8 To change display items. K SEEK /+ buttons CD: To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fastforward a track (press and hold). Radio: To tune in stations automatically (press); find a station manually (press and hold). L MODE button page 8 To select the radio band (FM/AM)*. M BTM/CAT button (CDX-GT320/GT32W) page 8 To start the BTM function (press and hold). BTM button (CDX-GT220/GT22W/ GT120) page 8 To start the BTM function (press and hold). N RESET button (located behind the front panel) (CDX-GT320/GT32W only) page 5 O Number buttons CD: (1)/(2): ALBUM /+ (during MP3/WMA playback) (CDX-GT320/GT32W/GT220/ GT22W) To skip albums (press); skip albums continuously (press and hold). (3): REP page 8 (4): SHUF page 8 (6): PAUSE To pause playback of a CD on this unit. To cancel, press again. Radio: To receive stored stations (press); store stations (press and hold). P Receptor for the card remote commander (CDX-GT320/GT32W/ GT220/GT22W only)

The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 5) (CDX-GT320/GT32W only). qj < (.)/, (>) buttons To control CD/radio, the same as (SEEK) /+ on the unit. Setup, sound setting, etc., can be operated by < ,. qk DSPL (display) button To change display items. ql VOL (volume) +/ button To adjust volume. w; ATT (attenuate) button To attenuate the sound. To cancel, press again. wa SEL (select) button The same as the select button on the unit. ws M (+)/m () buttons To control CD, the same as (1)/(2) (ALBUM /+) on the unit. Setup, sound setting, etc., can be operated by M m. wd SCRL (scroll) button To scroll the display item. wf Number buttons To receive stored stations (press); store stations (press and hold).
* In the case of a CD/MD changer, HD radio tuner or SAT tuner being connected; when (SOURCE) is pressed, the connected device (MD, HD, XM or SR) will appear in the display, depending on which device is connected. Furthermore, if (MODE) is pressed, you can switch the changer, HD radio tuner band or SAT tuner band (CDX-GT320/GT32W only). Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
For details on selecting a CD/MD changer, see page 10 (CDX-GT320/GT32W only).
Radio Storing and receiving stations

Caution

When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident.

Display items

Example: CDX-GT320
Storing automatically BTM
A Source (CDX-GT320/GT32W only) B Track number/Elapsed playing time, Disc/ artist name, Album number*1, Album name, Track name, Text information*2, Clock
*1 Album number is displayed only when the album is changed. (CDX-GT320/GT32W/GT220/GT22W only) *2 When playing an MP3, ID3 tag is displayed, and when playing a WMA, WMA tag is displayed. (CDX-GT320/GT32W/GT220/GT22W only)
Press (SOURCE) repeatedly until TUNER appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. Press and hold (BTM) until BTM flashes. The unit stores stations in order of frequency on the number buttons. A beep sounds when the setting is stored.

Storing manually

To change display items B, press (DSPL).
Tip Displayed items may differ depending on model, disc type, recording format and settings. For details on MP3/WMA, see page 13. (CDX-GT320/GT32W/GT220/GT22W only)

While receiving the station that you want to store, press and hold a number button ((1) to (6)) until MEM or MEMORY appears.
Note If you try to store another station on the same number button, the previously stored station will be replaced.

Repeat and shuffle play

During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears.

To play

Receiving the stored stations
Select the band, then press a number button ((1) to (6)).

Select

TRACK ALBUM* SHUF ALBUM* SHUF DISC
track repeatedly. album repeatedly. album in random order. disc in random order.

Tuning automatically

* When an MP3/WMA is played. (CDX-GT320/GT32W/GT220/GT22W only)
Select the band, then press (SEEK) /+ to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.
To return to normal play mode, select or SHUF OFF.
Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) /+ to locate the approximate frequency, then press (SEEK) /+ repeatedly to fine adjust to the desired frequency (manual tuning).
Other functions Changing the sound settings
Adjusting the sound characteristics BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer volume.
Adjusting setup items SET
Press and hold the select button. The setup display appears. Press the select button repeatedly until the desired item appears. Rotate the volume control dial to select the setting (example ON or OFF). Press and hold the select button. The setup is complete and the display returns to normal play/reception mode.
Press the select button repeatedly until BAL, FAD or SUB appears. The item changes as follows: LOW*1 t MID*1 t HI*1 t BAL (left-right) t FAD (front-rear) t SUB (subwoofer volume)*2 t AUX*3
*1 When EQ3 is activated (page 9). *2 When the audio output is set to SUB (page 9). ATT is displayed at the lowest setting, and can be adjusted up to 21 steps. *3 When AUX source is activated (page 10).
Note Displayed items will differ, depending on the source and setting.
The following items can be set (follow the page reference for details): z indicates the default settings. CLOCK-ADJ (Clock Adjust) (page 5) BEEP To set BEEP-ON (z) or BEEP-OFF. AUX-A*1 (AUX Audio) To turn the AUX source display AUX-A-ON (z) or AUX-A-OFF (page 10). A.OFF (Auto Off) To shut off automatically after a desired time when the unit is turned off, A.OFF-NO (z), A.OFF-30S (Seconds), A.OFF-30M (Minutes) or A.OFF-60M (Minutes). SUB/REAR*1 To switch the audio output. SUB-OUT (z): to output to a subwoofer. REAR-OUT: to output to a power amplifier. DEMO (Demonstration) To set DEMO-ON (z) or DEMO-OFF. DIM (Dimmer) To change the brightness of the display. DIM-ON: to dim the display. DIM-OFF (z): to deactivate the dimmer. M.DSPL (Motion Display) To select the Motion Display mode. CDX-GT320/GT32W M.DSPL-SA (z): to show moving patterns and spectrum analyzer. M.DSPL-OFF: to deactivate the Motion Display. CDX-GT220/GT22W/GT120 M.DSPL-ON (z): to show moving patterns. M.DSPL-OFF: to deactivate Motion Display. continue to next page t

Using optional equipment

Auxiliary audio equipment
By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below:
CD/MD changer (CDX-GT320/GT32W only)

Selecting the changer

1 Press (SOURCE) repeatedly until CD or MD appears. 2 Press (MODE) repeatedly until the desired changer appears.
Connecting the portable audio device
1 Turn off the portable audio device. 2 Turn down the volume on the unit. 3 Connect to the unit.

Unit number Disc number

Playback starts.
Skipping albums and discs
1 During playback, press (1)/(2) (ALBUM / +).
To skip Press (1)/(2) (ALBUM)
The following buttons on the card remote commander have also different buttons/functions from the unit. DSPL (display) button To change display items. </, (SEEK /+) buttons To control CD/radio, the same as (SEEK) /+ on the unit. SOUND button The same as the select button on the unit. M/m (DISC*/PRESET +/) buttons To control CD, the same as (1)/(2) (ALBUM /+) buttons on the unit. ATT (attenuate) button To attenuate the sound. To cancel, press again.
* Not available for this unit. Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
album album continuously discs discs continuously
and release (hold for a moment). within 2 seconds of first releasing. repeatedly. then, press again within 2 seconds and hold.
1 During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears.

Select To play

DISC SHUF CHANGER SHUF ALL*
disc repeatedly. tracks in the changer in random order. tracks in all units in random order.
* When one or more CD changers, or two or more MD changers are connected.
Tip SHUF ALL will not shuffle tracks between CD units and MD changers.
Card remote commander RM-X114 (for CDX-GT220/GT22W)
The corresponding buttons on the card remote commander control the same functions as those on this unit.
DSPL MENU* SOURCE </, (SEEK /+) SOUND OFF VOL (+/)

MODE LIST*

PRESET +

DISC +

PRESET

R ENTE

m/M (DISC*/ PRESET +/) ENTER* ATT
Additional Information Precautions
If your car has been parked in direct sunlight, allow the unit to cool off before operating it. Power antenna (aerial) will extend automatically while the unit is operating.

Before playing, clean the discs with a commercially available cleaning cloth. Wipe each disc from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog discs.
Notes on CD-R/CD-RW discs
Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the condition of the disc) may not play on this unit. You cannot play a CD-R/a CD-RW that is not finalized. CDX-GT320/GT32W/GT220/GT22W only The unit is compatible with the ISO 9660 level 1/ level 2 format, Joliet/Romeo in the expansion format, and Multi Session. The maximum number of: folders (albums): 150 (including root and empty folders). files (tracks) and folders contained in a disc: 300 (if a folder/file names contain many characters, this number may become less than 300). displayable characters for a folder/file name is 32 (Joliet), or 64 (Romeo). When the disc is recorded in Multi Session, only the first track of the first session format is recognized and played (any other format is skipped). The priority of the format is CD-DA and MP3/WMA. When the first track is a CD-DA, only CD-DA of the first session is played. When the first track is not a CD-DA, the MP3/ WMA session is played. If the disc has no data in any of these formats, NO MUSIC is displayed.

Moisture condensation

On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated.
To maintain high sound quality
Be careful not to splash juice or other soft drinks onto the unit or discs.

Notes on discs

To keep a disc clean, do not touch its surface. Handle the disc by its edge. Keep your discs in their cases or disc magazines when not in use. Do not subject discs to heat/high temperature. Avoid leaving them in a parked car or on a dashboard/rear tray. Do not attach labels, or use discs with sticky ink/ residue. Such discs may stop spinning when used, causing a malfunction, or may ruin the disc.

Music discs encoded with copyright protection technologies
Do not use any discs with labels or stickers attached. The following malfunctions may result from using such discs: Inability to eject a disc (due to a label or sticker peeling off and jamming the eject mechanism). Inability to read audio data correctly (e.g., playback skipping, or no playback) due to heat shrinking of a sticker or label causing a disc to warp. Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. You cannot play 8 cm (3 1/4 in) CDs. This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

Note on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.
Playback order of MP3/WMA files (CDX-GT320/GT32W/GT220/GT22W only)
MP3/WMA Folder (album) MP3/WMA file (track)
If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.

Maintenance

Replacing the lithium battery of the card remote commander
Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion.
RM-X151 (CDX-GT320/GT32W only)
About MP3 files (CDX-GT320/GT32W/GT220/GT22W only)
MP3, which stands for MPEG-1 Audio Layer-3, is a music file compression format standard. It compresses audio CD data to approximately 1/10 of its original size. ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to MP3 only. ID3 tag is 15/30 characters (1.0 and 1.1), or 63/126 characters (2.2, 2.3 and 2.4). When naming an MP3 file, be sure to add the file extension.mp3 to the file name. During playback or fast-forward/reverse of a VBR (variable bit rate) MP3 file, elapsed playing time may not display accurately.
Note If you play a high-bit-rate MP3, such as 320 kbps, sound may be intermittent.

+ side up

RM-X114 (for CDX-GT220/GT22W)
About WMA files (CDX-GT320/GT32W/GT220/GT22W only)
WMA, which stands for Windows Media Audio, is a music file compression format standard. It compresses audio CD data to approximately 1/22* of its original size. WMA tag is 63 characters. When naming a WMA file, be sure to add the file extension.wma to the file name. During playback or fast-forward/reverse of a VBR (variable bit rate) WMA file, elapsed playing time may not display accurately.

* only for 64 kbps Note Playback of the following WMA files is not supported. lossless compression copyright-protected
Notes on the lithium battery Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. Wipe the battery with a dry cloth to assure a good contact. Be sure to observe the correct polarity when installing the battery. Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.

continue to next page t

3 Pull out the release keys to remove the protection collar.

WARNING

Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.

Fuse replacement

When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.
Remove the unit. 1 Insert both release keys simultaneously until they click.

Hook facing inwards.

Fuse (10A)

Cleaning the connectors

The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 5) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged.
2 Pull the release keys to unseat the unit.
3 Slide the unit out of the mounting.

Back of the front panel

Notes For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. Never touch the connectors directly with your fingers or with any metal device.

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION 23.2 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic distortion. CEA2006 Standard Power Output: 17 Watts RMS 4 at 4 Ohms < 1% THD+N SN Ratio: 82 dBA (reference: 1 Watt into 4 Ohms)

Removing the unit

Remove the protection collar. 1 Detach the front panel (page 5). 2 Engage the release keys together with the protection collar.

CD Player section

Orient the release keys as shown.

Signal-to-noise ratio: 120 dB Frequency response: 10 20,000 Hz Wow and flutter: Below measurable limit

Tuner section

Tuning range: 87.5 107.9 MHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: 10.7 MHz/450 kHz Usable sensitivity: 9 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono) Harmonic distortion at 1 kHz: 0.5 % (stereo), 0.3 % (mono) Separation: 35 dB at 1 kHz Frequency response: 30 15,000 Hz
AUX-IN selector: XA-300 Interface adaptor for iPod: XA-120IP HD Radio tuner: XT-100HD
Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information.
MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.
Design and specifications are subject to change without notice.
Tuning range: 530 1,710 kHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: 10.7 MHz/450 kHz Sensitivity: 30 V

Power amplifier section

Outputs: Speaker outputs (sure seal connectors) Speaker impedance: ohms Maximum power output: 52 W 4 (at 4 ohms)
Halogenated flame retardants are not used in the certain printed wiring boards. Halogenated flame retardants are not used in cabinets. Packaging cushions are made from paper.

General

Output: Audio outputs terminal Front (CDX-GT320/GT32W only) Sub/Rear switchable Power antenna (aerial) relay control terminal Power amplifier control terminal Inputs: BUS control input terminal (CDX-GT320/GT32W only) BUS audio input terminal (CDX-GT320/GT32W only) Antenna (aerial) input terminal AUX input jack (stereo mini jack) Tone controls: Low: 10 dB at 60 Hz (XPLOD) Mid: 10 dB at 1 kHz (XPLOD) High: 10 dB at 10 kHz (XPLOD) Loudness: +4 dB at 100 Hz +2 dB at 10 kHz Power requirements: 12 V DC car battery (negative ground (earth)) Dimensions: Approx. 179 mm (7 1/7 1/8 in) (w/h/d) Mounting dimensions: Approx. 162 mm (7 1/1/1/2 in) (w/h/d) Mass: Approx. 1.2 kg (2 lb 11 oz) Supplied accessories: Card remote commander: RM-X151 (CDX-GT320/GT32W only) Parts for installation and connections (1 set) Optional accessories/equipment: for CDX-GT220/GT22W Card remote commander: RM-X114 for CDX-GT320/GT32W BUS cable (supplied with an RCA pin cord): RC-61 (1 m), RC-62 (2 m) CD changer (10 discs): CDX-757MX CD changer (6 discs): CDX-T69 Source selector: XA-C40

Troubleshooting

The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures.
No power is being supplied to the unit. Check the connection. If everything is in order, check the fuse. If the unit is turned off and the display disappears, it cannot be operated with the remote commander.*2 t Turn on the unit. The power antenna (aerial) does not extend. The power antenna (aerial) does not have a relay box. No sound. The volume is too low. The ATT function is activated. The position of the fader control FAD is not set for a 2-speaker system. The CD changer is incompatible with the disc format (MP3/WMA).*1 t Play back with a Sony MP3 compatible CD changer, or this unit. No beep sound. The beep sound is canceled (page 9). An optional power amplifier is connected and you are not using the built-in amplifier. The contents of the memory have been erased. The RESET button has been pressed. t Store again into the memory. The power supply lead or battery has been disconnected. The power supply lead is not connected properly.
Stored stations and correct time are erased. The fuse has blown. Makes noise when the position of the ignition is switched. The leads are not matched correctly with the cars accessory power connector. During playback or reception, demonstration mode starts. If no operation is performed for 5 minutes with DEMO-ON set, demonstration mode starts. t Set DEMO-OFF (page 9). The display disappears from/does not appear in the display window. The dimmer is set DIM-ON (page 9). The display disappears if you press and hold (OFF). t Press and hold (OFF) on the unit until the display appears. The connectors are dirty (page 14). The Auto Off function does not operate. The unit is turned on. The Auto Off function activates after turning off the unit. t Turn off the unit. Card remote commander operation is not possible.*1 Make sure the insulation film has been removed (page 5).
The operation buttons do not function.*1 The disc will not eject. Press the RESET button (page 5).*1 Press Z (eject) (page 6).*3

Radio reception

The stations cannot be received. The sound is hampered by noises. Connect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a cars antenna (aerial) booster (only when your car has built-in FM/AM antenna (aerial) in the rear/side glass). Check the connection of the car antenna (aerial). The auto antenna (aerial) will not go up. t Check the connection of the power antenna (aerial) control lead. Check the frequency. Preset tuning is not possible. Store the correct frequency in the memory. The broadcast signal is too weak. Automatic tuning is not possible. Setting of the local seek mode is not correct. t Tuning stops too frequently: Set LOCAL-ON (page 10). t Tuning does not stop at a station: Set MONO-ON (page 10). The broadcast signal is too weak. t Perform manual tuning. During FM reception, the ST indication flashes. Tune in the frequency accurately. The broadcast signal is too weak. t Set MONO-ON (page 10). An FM program broadcast in stereo is heard in monaural. The unit is in monaural reception mode. t Set MONO-OFF (page 10).

*1 CDX-GT320/GT32W only *2 CDX-GT320/GT32W/GT220/GT22W only *3 CDX-GT220/GT22W/GT120 only

CD/MD playback

The disc cannot be loaded. Another disc is already loaded. The disc has been forcibly inserted upside down or in the wrong way. The disc does not playback. Defective or dirty disc. The CD-Rs/CD-RWs are not for audio use (page 12). MP3/WMA files cannot be played back.*2 The disc is incompatible with the MP3/WMA format and version (page 13). MP3/WMA files take longer to play back than others.*2 The following discs take a longer time to start playback. a disc recorded with a complicated tree structure. a disc recorded in Multi Session. a disc to which data can be added. The display items do not scroll. For discs with very many characters, those may not scroll. A.SCRL is set to OFF. t Set A.SCRL-ON (page 10). t Press and hold (DSPL) (SCRL).*2 The sound skips. Installation is not correct. t Install the unit at an angle of less than 45 in a sturdy part of the car. Defective or dirty disc.

Error displays/Messages

BLANK (CDX-GT320/GT32W only) Tracks have not been recorded on the MD.*1 t Play an MD with recorded tracks. ERROR*2 The disc is dirty or inserted upside down.*1 t Clean or insert the disc correctly. A blank disc has been inserted. The disc cannot play due to a problem. t Insert another disc.
FAILURE (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect. t See the installation/connections manual of this model to check the connection. FAILURE (Illuminates for about 1 second.) (CDXGT320/GT32W only) When the SAT tuner is connected, storing an SAT radio channel into a preset failed. t Be sure to receive the channel that you want to store, then try it again. LOAD (CDX-GT320/GT32W only) The unit/changer is loading the disc. t Wait until loading is complete. L. SEEK +/ The local seek mode is on during automatic tuning. NO DISC (CDX-GT320/GT32W only) The disc is not inserted in the CD/MD changer. t Insert discs in the changer. NO INFO (CDX-GT320/GT32W/GT220/GT22W only) Text information is not written in the MP3/WMA file. NO MAG (CDX-GT320/GT32W only) The disc magazine is not inserted in the CD changer. t Insert the magazine in the changer. NO MUSIC The disc does not contain a music file. t Insert a music CD in this unit or MP3 playable changer. NO NAME A disc/track name is not written in the track. NOTREADY (CDX-GT320/GT32W only) The lid of the MD changer is open or the MDs are not inserted properly. t Close the lid or insert the MDs properly. OFFSET There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. PUSH EJT (CDX-GT220/GT22W/GT120 only) The disc cannot be ejected. t Press Z (eject) (page 6). READ The unit is reading all track and album information on the disc. t Wait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute. RESET (CDX-GT320/GT32W only) The CD unit and CD/MD changer cannot be operated due to a problem. t Press the RESET button (page 5). or During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further.

doc1

3-215-428-12 (1)

CDX-GT320/GT32W

AUDIO OUT FRONT

Supplied with XA-C40 Fourni avec le XA-C40
Source selector (not supplied) Slecteur de source (non fourni) XA-C40
Supplied with the CD/MD changer Fourni avec le changeur de CD/MD
FM/AM Compact Disc Player
Installation/Connections Installation/Connexions

AUDIO OUT REAR*

AUDIO OUT FRONT*1 BUS AUDIO IN*1
CDX-GT320 CDX-GT32W *1 CDX-GT320/GT32W only *2 RCA pin cord (not supplied) *3 AUDIO OUT can be switched SUB or REAR. For details, see the supplied Operating Instructions. *1 CDX-GT320/GT32W uniquement *2 Cordon broche RCA (non fourni) *3 AUDIO OUT peut tre commut sur SUB ou REAR. Pour obtenir plus de dtails, reportez-vous au mode demploi fourni.

* AUDIO OUT SUB/REAR

BUS IN

REAR FRONT AUDIO OUT

from car antenna (aerial) partir de lantenne du vhicule
AUDIO OUT Fuse (10 A) REAR*3 Fusible (10 A)

BUS CONTROL IN*1

AMP REM Max. supply current 0.3 A Courant max. fourni 0,3 A
Blue/white striped Ray bleu/blanc

Left Gauche

White Blanc White/black striped Ray blanc/noir Gray Gris

Black Noir

* AUDIO OUT SUB/REAR Right Droit

Blue Bleu

CDX-GT320 CDX-GT32W CDX-GT220 CDX-GT22W CDX-GT120
2007 Sony Corporation Printed in China
Gray/black striped Ray gris/noir CDX-GT320/GT32W
ANT REM Max. supply current 0.1 A Courant max. fourni 0,1 A

BUS AUDIO IN

Green Vert Green/black striped Ray vert/noir Purple Violet Purple/black striped Ray volet/noir

Red Rouge

Source selector* Slecteur de source* XA-C40 * not supplied non fourni Right Droit

Yellow Jaune

BUS CONTROL IN

Cautions

This unit is designed for negative ground (earth) 12 V DC operation only. Do not get the leads under a screw, or caught in moving parts (e.g. seat railing). Before making connections, turn the car ignition off to avoid short circuits. Connect the yellow and red power supply leads only after all other leads have been connected. Run all ground (earth) leads to a common ground (earth) point. Be sure to insulate any loose unconnected leads with electrical tape for safety. The use of optical instruments with this product will increase eye hazard. Notes on the power supply lead (yellow) When connecting this unit in combination with other stereo components, the connected car circuits rating must be higher than the sum of each components fuse. When no car circuits are rated high enough, connect the unit directly to the battery.

Connection example

Notes (-A) Be sure to connect the ground (earth) lead before connecting the amplier. The alarm will only sound if the built-in amplier is used. Tips (-B) When connecting only a single CD/MD changer or other optional device, connect directly to this unit. For connecting two or more CD/MD changers or other optional devices, the source selector XA-C40 (not supplied) is necessary.
Notes on the control and power supply leads The power antenna (aerial) control lead (blue) supplies +12 V DC when you turn on the tuner. When your car has built-in FM/AM antenna (aerial) in the rear/ side glass, connect the power antenna (aerial) control lead (blue) or the accessory power supply lead (red) to the power terminal of the existing antenna (aerial) booster. For details, consult your dealer. A power antenna (aerial) without a relay box cannot be used with this unit. Memory hold connection When the yellow power supply lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off. Notes on speaker connection Before connecting the speakers, turn the unit off. Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid its damage. Do not connect the speaker terminals to the car chassis, or connect the terminals of the right speakers with those of the left speaker. Do not connect the ground (earth) lead of this unit to the negative () terminal of the speaker. Do not attempt to connect the speakers in parallel. Connect only passive speakers. Connecting active speakers (with built-in ampliers) to the speaker terminals may damage the unit. To avoid a malfunction, do not use the built-in speaker leads installed in your car if the unit shares a common negative () lead for the right and left speakers. Do not connect the units speaker leads to each other. Note on connection If speaker and amplier are not connected correctly, FAILURE appears in the display. In this case, make sure the speaker and amplier are connected correctly.

 

Tags

Pentax P3 DW12-PFE1 Sights Alpha Reflexes Systemdiagnostics Generation Gps22A 0933 CD723 WM-FX277 ML-2245 DSB-P990v DIR Antenna 84800 1 0 WS-7016U G31M-GS CPS210 Central Gigaset S675 Surfer MA1012W Monitor EHC30200X Enhwi-2AN3 CDX-CA750 PW-TC930 Zanussi M-430 C5000 LH-T6540A MRV-F900 CMT-PX333 Wtmc4500UC-II SCH-I920 AG-6124B V-AMP PRO VGN-CR31s L RH7624W S5100 TX-26LE8P FLM-3701 WYR-G54 Review RIM 2500 IMP-400 CMT-LX40I SSD522SW Motorola V330 L100-black SCX-4623F 2968 PC SF-350 CMT-EX100 P2560 Storage Disk HD160JJ-P LH-D6430 Super Printer Powerwash SCX-4824HN D1944 CTY 105 P42VHA20US DSC-H3 N24elux CCD-TR415E CN-20 KX-TG7120FR 2-70G K7S5A IC-F320 C18AWR-n82 M105-S3051 DV6400 DC988KA SD-9420 AVR-683 H22-80 P4S533-VM NV-DV10000 Nikon S60 Yamaha 03D Model 257 Sector MAP XV-HTD640 300TX HP501 3000 G530 JAX-PK33 L1753T-SF XVS1100A-2006 Breadmaker Rebel G Olympus W-10 ED-2200 BPV755 Samsung J208 Samsung 170B QG-HS805

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101