Upgrade Your ROWE/AMI Vinyl Jukebox to CD
In Minutes Without Any Modifications !

RMC-SONY

The RMC-SONY is a CD conversion adapter for ROWE/AMI vinyl and vinyl/CD combo jukeboxes. It was designed to operate with any jukebox that uses the 6-08870-xx / 4-07773-xx Computer or the 4-07221-xx Mechanism Control unit. This includes models CTI-2, R-84 through R-94, RI-4, RI-5, Prelude, Tempo, TempoDisco, Jewel, Starburst, Starlight, Starwood, Blue Magic, Gold Magic, Romantica, Golden 7/8/89/90/91/92, Sapphire 7/8/89/90/91/92, LaCombo, Bubbler, ComboStar and RoweStar. The RMC-SONY connects to any 50 to 400 disc Sony CD Mega-Changer with the S-Link/Control A1 interface jack. In addition to vinyl, the RMC-SONY also replaces the six or ten disc CD player in jukeboxes having the CD combo feature. The RMC-SONY works with the ROWE/AMI Central Control Computer by simulating the operation of the record mechanism. This tricks the jukebox into thinking it is still playing records, but instead, its playing CDs. The jukebox operates exactly as it did before, but now with superb audio quality. No more scratches, pops or rumble and no more worrying about worn records or stylus and cartridge replacements.
Mechanism Converter Passive-Inverse RIAA Filter

Combo Cable

(R90 to R94 jukeboxes only)

Sony CD Changer Cable

Data Sync Engineering
P.O. Box 539, Footbridge Lane, Bldg 3 Blairstown, New Jersey 07825
TEL: (908) 362-6299 FAX: (908) 362-5889 www.datasynceng.com
Copyright 2005 Data Sync Engineering. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
Record Mechanism Connectors
AUDIO CABLE This is a 4-Pin connector from the Phono input of the amplifier.
POWER CABLE This is a 9-Pin connector from the Power Supply.
MECHANISM CONTROL CABLE This is a 17-Pin connector from the Central Control Computer. Pin 17 may be keyed or blank and must be in the position marked as 17
Mechanism Converter Connectors
POWER CABLE This is a 9-Pin connector from the Power Supply. *P5 CD COMBO This is the optional CD control from the CCC P5 DATA.
CD CONTROL This is the Control cable to the Sony CD changer.
*P5 CD COMBO feature is only available on R90 to R94 model jukeboxes using the P5 DATA connector.
Installing the CD Upgrade Kit
Pictured here is a 50+1 CD changer Sony Model CDP-CX55
Unplug the jukebox from the outlet. Remove the two hold-down bolts from the left and right side of the record changer. Disconnect the AUDIO CABLE, POWER CABLE and CONTROL CABLE. Grasp the record changer at the bottom rails and lift out.
Connect one end of the Sony CD cable to the S-Link or Control-A1 jack at the back of the CD changer. Set mode switch to CD 1. Connect the RCA audio plugs from the Passive-Inverse RIAA Filter to the Analog or Line Out jacks at the back of the CD changer. Connect the other end to the 4-pin phono input audio cable.
On the Mechanism Converter board, Insert the POWER, MECH CONTROL, and SONY CD CONTROL cables. If your jukebox supports the CD Combo feature, plug in the P5 CD COMBO cable. Make sure the keyed or blank pin is at the #17 hole position on the Mech Control Connector.
Plug the other end of the P5 CD COMBO cable into the P5 DATA connector at the Central Control Computer. The CD Combo feature was optionally available on R90 through R94 jukebox models. You can add this feature by replacing the CCC EPROM program with a combo support version.

The CD Setup Disc

Included with your RMC-SONY upgrade kit is an audio CD that simply contains 99 tracks of silence. This is used to turn on the Song Programming mode for vinyl setup or to perform operations. To select Song Program or perform an operation, insert the CD setup disc into a disc number position. See Setup Functions for disc # operations. Select that disc and press the PLAY button on the CD changer. The setup disc contains silent tracks so nothing will be heard. If the function was successful, the Mechanism Converter will respond by stopping play. If the Song Program Mode was selected, then the IDX LED on the Mechanism Converter board will turn on and remain on.

Setup Functions

Disc # Operation
6 CD Combo Jukebox Select this feature if you want 6 disc CD combo operation. EPROMs we have in our jukeboxes.

Disc #

Operation
10 CD Combo Jukebox Select this feature if you want 10 disc CD combo operation.

70038213

R89 R90 R91 R92 R94

V1.2 V1.3 V1.0 V1.2 V1.1

(No CD support) (No CD support) (6 CD only) (6 CD & 10 CD) (6 CD & 10 CD)

The 10-disc CD combo was offered on the R-92+ model jukeboxes, but any R-90 to R-94 jukebox will support 6 or 10 CD combo operation by changing the Central Control Computer EPROM.
Turn off Soft Play By default, songs start with a softer volume. Select this feature to have all songs start at set volume. Used on R-84 to R-89 or if using alternate mute signal. Reset Features Resets to 6-disc combo and soft play.
Individual Song Program Mode Select this operation to turn on the record programming mode (IDX LED continuously On). This mode is turned off by pressing the power button on the CD changer. Erase Song Memory Select this operation to clear all song memory programming. Record selections will only play programmed song positions. CD combo initialization is not affected. Pre-set Vinyl Selection Songs #2 (Record Only) 200 vinyl song selections are assigned using the first 10 tracks on 20 consecutive CDs starting with CD number 1. Vinyl CDs: 1 20

(Factory reset)

Pre-set Vinyl Selection Songs #1 (Record & CD Combo) 200 vinyl song selections are assigned using the first 10 tracks on 20 consecutive CDs starting with CD number 11. Combo CDs: 110, Vinyl CDs: 1130
Programming Vinyl Record Selections
To program individual record selections, you must be in Song Program Mode (IDX LED on). Place the setup disc into CD position 46 then press PLAY. The disc will stop and the IDX LED will remain on. If your using the CD combo feature, CDs 1 to 6 (or 10) should not be used for vinyl selections. Select a desired song and start play. While the song is playing, make a selection on the jukebox to which this song will be assigned to. When the selection is successfully programmed, the song will stop playing. Continue selecting the next song play and making jukebox selections until all desired songs have been programmed. All programming is stored in memory which is unaffected by a loss of power. Turn off the Song Program Mode by pressing the POWER button on the CD changer.

CD Combo Programming

CD combo initialization is performed by the jukebox Central Control Computer. The Mechanism Converter translates the combo commands to Sony CD changer commands. Depending on your setup configuration, the first six (feature 30) or ten (feature 31) CDs in the Sony changer will be assigned to combo selections. CD Initialization To perform the CD initialization, place the jukebox service switch into the SERVICE position then enter 777 on the keypad. When initialization starts, four dashes will appear on the CCC display. When the initialization is complete, the CCC display will go blank. Playing CD Combo Selections On a combo jukebox, CD's are selected by entering a four digit number. The first digit is always "5" for CD selections. The second digit is the disc number minus one. To select disc "1", you would enter "0". The last two digits are the track # of the song you wish to play. For example, if you wanted to play disc 3, track 9, you would enter "5209" on the keypad.

Sony Mega-Changer Adapter For Pioneer CJ-V Jukeboxes Compatible Sony Changers
CDP-CX53 CDP-CX55 CDP-CX57 CDP-CX70ES CDP-CX88ES CDP-CX200 CDP-CX205

PIO-SNY

CDP-CX210 CDP-CX220 CDP-CX225 CDP-CX230 CDP-CX235 CDP-CX240 CDP-CX250
CDP-CX255 CDP-CX260 CDP-CX270 CDP-CX333ES CDP-CX555ES CDP-CX300 CDP-CX335
CDP-CX350 CDP-CX355 CDP-M333ES CDP-M555ES CDP-CX400 CDP-CX450 CDP-CX455

Installation

The phone plug from the Sony adapter connects to the S-Link or Control-A1 jack on the back of your Sony CD Mega-Changer. Set the command mode switch to CD #1. Plug in the 9-pin Triple Changer Adapter, insert the 3 DIN plugs to the player sockets on the jukebox control unit (flat side at the top). Using 2 RCA Y-cables, connect together the 3 left channel inputs, the other 2 for the right channel. The RCA audio cable from the Sony player plugs into the Y-cable jacks. Plug in the Sony CD and adapter power supply.

Data Sync Engineering

PO Box 539, Footbridge Lane, Bldg 3 Blairstown, New Jersey 07825
TEL: (908) 362-6299 FAX: (908) 362-5889 http://www.datasynceng.com
Copyright 2004 Data Sync Engineering. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.