CDX-434RF/530RF/535RF

SERVICE MANUAL

Ver 1.1 2000. 08

US Model Canadian Model

CDX-434RF/530RF

AEP Model UK Model

CDX-434RF

E Model

CDX-434RF/535RF

Photo: CDX-535RF
Model Name Using Similar Mechanism CD Drive Mechanism Type Optical Pick-up Name
NEW MG-251A-137 KSS-720A/K1NP

SPECIFICATIONS

CD changer
System Laser Diode Properties Material Wavelength Emission Duration Laser output power Compact disc digital audio system GaAlAs 780 nm Continuous Less than 44.6 W*
Wired remote (RM-X88) (CDX-434RF)
Dimensions Approx. 122 36.5 15.5 mm (4 7/7/16 5/8 in.) (w/h/d) Approx. 255 g (9 oz.)
* This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block. Transmitting frequency 88.3 MHz/88.5 MHz/ 88.7 MHz/88.9 MHz/ 89.1 MHz/89.3 MHz/ 89.5 MHz/89.7 MHz/ 89.9 MHz (switchable) Wired remote control (8 pin) RF signal (FM) output Power input (3 pin) 800 mA (at playback) 800 mA (at disc loading/ ejecting) 10C to +55C (14F to 131F) Approx. 181.5 mm (10 3/5/1/4 in.) (w/h/d) Approx. 2.1 kg (4 lb. 10 oz.)
Wired remote (RM-X87) /Wireless remote (RM-X89) (CDX-530RF/535RF)
Dimensions Wired remote: Approx. 122 36.5 15.5 mm (4 3/7/16 5/8 in.) (w/h/d) Wireless remote: Approx. 40 6.mm (1 5/8 9/1/2 in.) (w/h/d) Wired remote: Approx. 255 g (9 oz.) Wireless remote: Approx. 20 g (1 oz.) Wireless remote: Lithium battery (CR2025)
Input/output terminals Current drain Operating temperature Dimensions Mass

Battery

Supplied accessories
Disc magazine (1) Parts for installation and connections (1 set) Design and specifications are subject to change without notice.

Relay box

Input/output Dimensions Mass Antenna input terminal Antenna output cord CD Changer input cord Approx. 27 mm (1 5/5/1/8 in.) (w/h/d) 140 g (5 oz.)
COMPACT DISC CHANGER SYSTEM
TABLE OF CONTENTS 1. 2. SERVICING NOTES.. 3 GENERAL
Location and Function of controls.. 4 Installation... 10 Connections... 11

3. 4. 5. 6. 7.

DISASSEMBLY.. 13 MECHANISM DECK ASSEMBLY.. 19 MECHANICAL ADJUSTMENT. 21 ELECTRICAL CHECK.. 22 DIAGRAMS
7-1. Block Diagram RF SERVO Section . 7-2. Block Diagram MAIN Section .. 7-3. Note for Printed Wiring Boards and Schematic Diagrams.. 7-4. Printed Wiring Boards RF Section . 7-5. Schematic Diagram RF Section . 7-6. Printed Wiring Boards MAIN Section (1/2) . 7-7. Printed Wiring Boards MAIN Section (2/2) . 7-8. Schematic Diagram MAIN Section (1/2) . 7-9. Schematic Diagram MAIN Section (2/2) . 7-10. Printed Wiring Boards FM/POWER Section .. 7-11. Schematic Diagram FM/POWER Section . 7-12. IC Pin Function Description..
EXPLODED VIEWS.. 40 ELECTRICAL PARTS LIST. 46
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFIS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PICES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPLMENTS PUBLIS PAR SONY.
SECTION 1 SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICKUP BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic breakdown because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic breakdown and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. Laser Diode Properties Material: GaAlAs Wavelength: 780 nm Emission Duration: continuous Laser Output Power: less than 44.6 W* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block. Flexible Circuit Board Repairing Keep the temperature of the soldering iron around 270 C during repairing. Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). Be careful not to apply force on the conductor when soldering or unsoldering. Notes on chip component replacement Never reuse a disconnected chip component. Notice that the minus side of a tantalum capacitor may be damaged by heat.
DISC MAGAZINE GETTING OUT PROCEDURE ON THE POWER SUPPLY IS OFF
Remove the COVER (LOWER.T) assy beforehand 1) Press the lever (ML.S) to arrow direction. 2) Removal the magazine assy.
Note: Take out the magazine only when the tray is completely within the magazine. If the disk or tray is sticking out, turn on the power and eject the magazine.

CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Lever (ML.S)

US/Canadian model:
If the optical pick-up block is defective, please replace the whole optical pick-up block. Never turn the semi-fixed resistor located at the side of optical pick-up block.

OPTICAL PICK-UP BLOCK

Magazine assy

SEMI-FIXED RESISTOR

AEP/UK model:
When replacing the chassis (U.S) sub assy of mechanism deck which have the CAUTION LABEL attached, please be sure to put a new CAUTION LABEL (3-223-913-11) to the chassis (U.S) sub assy.

SECTION 2 GENERAL

Location and function of controls (CDX-434RF) Nomenclature (CDX-434RF)
This section is extracted from instruction manual.
Wired remote (RM-X88)/Tlcommande fil (RM-X88)
1 DISC (disc select) buttons 2 AMS (Automatic Music Sensor/manual search) control Depending on which side of the control you push down, you can select from the following functions. 3 REP (repeat play) indication 4 SHUF (shuffle play) indication 5 DISC (disc number) indication The indicated disc number matches the disc number in the disc magazine. 6 TRACK (track number) indication
7 MHz (frequency) indication 8 u (play/pause) button If pressed during CD playback, the CD will pause. If pressed again, CD playback will continue. 9 OFF button 0 Play/pause indication Turns around during CD playback and flashes when the pause button is pressed. qa LEVEL (output level) indication qs SHUF/REP (shuffle play/repeat play/ control mode set) button
1 Touches DISC (slection de disques) 2 Commande AMS (dtecteur automatique de musique/recherche manuelle) Suivant le ct de la commande sur lequel vous appuyez, vous pouvez slectionner les fonctions suivantes. 3 Indication REP (rptition de la lecture) 4 Indication SHUF (lecture alatoire) 5 Indication DISC (numro de disque) Le numro de disque indiqu correspond au numro de disque dans le chargeur de disques. 6 Indication TRACK (numro de plage)
7 Indication MHz (frquence) 8 Touche u (lecture/pause) Si vous appuyez sur cette touche en cours de lecture CD, le CD passe en mode de pause. Si vous appuyez de nouveau sur cette touche, la lecture CD reprend. 9 Touche OFF (arrt de la lecture de CD) 0 Indication de lecture/pause Tourne pendant la lecture dun CD et clignote lorsque la touche de pause est actionne. qa Indication LEVEL (niveau de sortie) qs Touche SHUF/REP (lecture alatoire/lecture rpte/mode de rglage)
AMS function To locate the beginning of a track, push down > to locate the beginning of the next track. to locate the beginning of the track currently played. If you push down the control repeatedly, the beginnings of all following or previous tracks will be located until the end of the disc is reached. Manual search function To quickly locate a desired point of a track, push down and hold M to fast-forward. m to fast-reverse. The elapsed playing time of the track will be shown in the display window during manual search. Disc select function To select a desired disc, press momentarily to select the next disc. to select the previous disc.

Release, and slide open. Relchez et coulissez pour ouvrir.

To remove Retrait

Disc magazine Chargeur de disques
Use the unit with the door closed Otherwise, foreign matter may enter the unit and contaminate the lenses inside the CD changer.

Z (EJECT)

If the disc magazine does not lock properly Take out the disc magazine, press Z, and re-insert it. Si vous ne pouvez pas fermer le chargeur de disques Retirez le chargeur, appuyez sur Z et rintroduisez-le.
Utiliser cet appareil avec la trappe ferme Sinon, des corps trangers pntreront dans lappareil et encrasseront les lentilles lintrieur du changeur CD.
Notes on the disc magazine
Do not leave the disc magazine in locations with high temperature and high humidity, such as on a car dashboard or in the rear window where the disc magazine will be subject to direct sunlight. Do not place more than one disc at a time onto a tray, otherwise the CD changer and the discs may be damaged. Do not drop the disc magazine or subject it to a violent shock.
Remarques sur le chargeur de disques
Nabandonnez pas le chargeur de disques dans des endroits affichant des tempratures et une humidit leves, tels que sur le tableau de bord dune voiture ou sur la plage arrire o le chargeur de disques sera soumis aux rayons directs du soleil. Ne placez pas plus dun disque la fois sur le plateau, sinon le changeur de CD et les disques risquent dtre endommags. Ne pas laisser tomber le chargeur de disques ni le cogner.

When the tray comes out

Normally, the trays will not come out of the disc magazine. However, if they are pulled out of the disc magazine, it is easy to re-insert them.
With the cut-away portion of the tray facing you, insert the right corner of the tray in the slot, then push in the left corner until it clicks.
Note Do not insert the tray upside down or in the wrong direction.

Si un plateau senlve

En principe, les plateaux ne senlvent pas du magasin. Sils senlvent du magasin, il est cependant facile de les y rintroduire.
Lencoche du plateau tant face vous, introduisez langle droit du plateau dans la fente et poussez ensuite sur langle gauche jusqu ce quil sencliquette.
Remarque Nintroduisez pas le plateau lenvers ni dans le mauvais sens.

Notes on compact discs

A dirty or defective disc may cause sound drop-outs during CD playback. To enjoy optimum sound, handle the disc as follows. Handle the disc by its edge, and do not touch the unlabled surface. (fig. A) Do not stick paper or tape on the disc. (fig. B) Do not expose the discs to direct sunlight or heat sources such as hot air-ducts. Do not leave the discs in a car parked in direct sunlight where there can be a considerable rise in temperature inside the car. (fig. C) Before playing, clean the discs with an optional cleaning cloth. Wipe each disc in the direction of the arrows. (fig. D) Do not use solvents such as benzine, thinner, commercially available cleaner, or antistatic spray intended for analog discs.

Press or repeatedly to select the output level.
To decrease the output level
To go back to the normal playback mode, press (SHUF/REP) repeatedly until the SHUF or REP indication disappears.
To increase the output level
Appuyez sur (SHUF/REP) pendant deux secondes. Appuyez brivement sur (SHUF/REP). Rglage initial
Playing tracks repeatedly

Repeat Play

You can select: REP 1to repeat the track. REP 2to repeat the disc. Press (SHUF/REP) repeatedly until the desired setting appears (REP1 or REP2). After five seconds, the repeat play starts. Each time you press (SHUF/REP), the display changes as follows: B SHUF 1 B SHUF 2 B REP 1 REP 2 Cancel (REP off) b
Appuyez plusieurs fois de suite sur ou pour slectionner le niveau de sortie.
Pour diminuer le niveau de sortie
Note When you select level 4 or 5, the CD playback sound may be distorted or you may hear some noise. In such a case, select a lower output level on the unit and turn down the overall volume on your car audio.
Pour augmenter le niveau de sortie

Rptition de plages

Lecture rpte
Vous pouvez slectionner: REP 1pour rpter une plage. REP 2pour rpter tout un disque. Appuyez plusieurs fois sur (SHUF/REP) jusqu ce que le rglage souhait apparaisse (REP1 ou REP2). La lecture rpte commence dans les cinq secondes qui suivent.
Appuyez sur (SHUF/REP) pendant deux secondes.
To go back to the normal playback mode, press (SHUF/REP) repeatedly until the REP or SHUF indication disappears.
Remarque Si vous slectionnez le niveau 4 ou 5, le son de lecture CD peut comporter des distorsions ou des parasites. En pareil cas, slectionnez un niveau de sortie infrieure et baissez le volume de votre autoradio.
Operation (CDX-530RF/535RF)
This unit cannot be used with a car audio without FM tuner. If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. Avoid installing the CD changer, wireless remote, and wired remote in places: subject to temperature exceeding 55C (131F). subject to direct sunlight. near heat sources (such as heaters). exposed to rain or moisture. exposed to excessive dust or dirt. subject to excessive vibration.

: 88.3 MHz t 89.9 MHz t 89.7 MHz t 89.5 MHz t 89.3 MHz t 89.1 MHz t 88.9 MHz t 88.7 MHz t 88.5 MHz t : 88.3 MHz t 88.5 MHz t 88.7 MHz t 88.9 MHz t 89.1 MHz t 89.3 MHz t 89.5 MHz t 89.7 MHz t 89.9 MHz t

Press or output level.

repeatedly to select the
To decrease the output level :
: 88.3 MHz t 89.9 MHz t 89.7 MHz t 89.5 MHz t 89.3 MHz t 89.1 MHz t 88.9 MHz t 88.7 MHz t 88.5 MHz t : 88.3 MHz t 88.5 MHz t 88.7 MHz t 88.9 MHz t 89.1 MHz t 89.3 MHz t 89.5 MHz t 89.7 MHz t 89.9 MHz t Appuyez sur (SHUF/REP) pendant deux secondes.
Press (SHUF) for two seconds until frequency appears. Press or repeatedly to select the frequency.
Appuyez sur (SHUF) pendant deux secondes jusqu ce que la frquence apparaisse. Appuyez sur ou pour slectionner la frquence. Appuyez sur (SHUF) pendant deux secondes. Remarques Si vous changez la frquence de transmission de lappareil, noubliez pas de syntoniser votre syntoniseur FM sur la nouvelle frquence slectionne. Appuyez sur la touche u de la tlcommande filaire avant de changer la frquence si lappareil nest pas sous tension.
To increase the output level :
Press (SHUF) for two seconds. Notes When you change the transmitting frequency on the unit, be sure to tune your FM tuner to the newly selected one. Press u on the wired remote before changing the frequency if the power to the unit is turned off.
Appuyez sur (SHUF) pendant deux secondes. Appuyez de nouveau brivement sur (SHUF). Appuyez sur le niveau de sortie. ou pour slectionner
Press (SHUF) for two seconds. Press (SHUF) again momentarily. Press or to select the output level.
Changing the output level
You can select the output level from the unit. Normally the unit is used at the initial output level; change the level if necessary.
Press (SHUF) for two seconds. Note When you select level 4 or 5, the CD playback sound may be distorted or you may hear some noise. In such a case, select a lower output level on the unit and turn down the overall volume on your car audio.
Appuyez sur (SHUF) pendant deux secondes. Remarque Si vous slectionnez le niveau 4 ou 5, le son de lecture CD peut comporter des distorsions ou des parasites. En pareil cas, slectionnez un niveau de sortie infrieure et baissez le volume de votre autoradio.

Installation

How to install the CD changer
When you install the CD changer, be careful not to damage wiring or equipment on the other side of the mounting surface. The brackets 1 provide two positions for mounting, high and low. Use the appropriate screw holes according to your preference.
Installation du changeur de CD
Quand vous installez le changeur de CD, veillez ne pas endommager les cbles ou les instruments qui se trouvent de lautre ct. Les supports 1 offrent deux positions de montage, haut et bas. Utilisez les trous de vissage appropris en fonction de vos prfrences.

Horizontal installation

Installation horizontale

Connector Connecterur

Catch Ergot

Fuse replacement

If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction.

Remplacement du fusible

Warning
Use a fuse with the specified amperage rating. Use of a higher amperage fuse may cause serious damage. Si le fusible saute, vrifiez la connexion dalimentation et remplacez-le. Si le fusible saute nouveau quand vous venez de le remplacer, il sagit peut tre dun mauvais fonctionnement interne.

Avertissement

Utilisez un fusible de lamprage spcifi. Lutilisation dun fusible damprage suprieur peut causer de srieux dommages.
Installing the wireless remote (CDX-530RF/535RF)
Use the supplied velcro tapes 5, and mount the wireless remote in a suitable location where it will not interfere with your driving.
Installation de la tlcommande sans fil (CDX-530RF/535RF)
Utilisez les bandes velcro fournies 5 pour installer la tlcommande sans fil dans un endroit qui ne risque pas de gner la conduite.
to where it is going to be mounted vers la surface de montage
Wired remote (RM-X88)/Tlcommande fil (RM-X88) (CDX-434RF)

DISC +/ DISC +/

Wired remote (RM-X87)/Tlcommande fil (RM-X87) (CDX-530RF/535RF)

SHUF/REP

Note The supplied wireless remote (RM-X89) can be operated almost like the wired remote (RM-X87).
SHUF/REP Remarque La tlcommande sans fil fournie (RM-X89) se manipule pratiquement comme la tlcommande filaire (RM-X87).
Because this unit processes CD playback sound through an FM tuner, there may be interference noise during CD playback. In such a case, change the frequency of the modulated RF signal transmitted from the unit. The initial setting is 88.3 MHz. 1 Press (SHUF/REP) for two seconds until frequency appears. or repeatedly to 2 Press select the frequency. or , the Each time you press frequencies change as follows: :88.3 MHz t 89.9 MHz t 89.7 MHz t 89.5 MHz t 89.3 MHz t 89.1 MHz t 88.9 MHz t 88.7 MHz t 88.5 MHz t 88.3 MHz :88.3 MHz t 88.5 MHz t 88.7 MHz t 88.9 MHz t 89.1 MHz t 89.3 MHz t 89.5 MHz t 89.7 MHz t 89.9 MHz t 88.3 MHz 3 Press (SHUF/REP) for two seconds.

SW board

MAIN board

LSW board

RF board
U : B+ Line. H : adjustment for repair. Power voltage is dc 14.4V and fed with regulated dc power supply from CD changer controller. Voltages and waveforms are dc with respect to ground under no-signal conditions. no mark : CD PLAY Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms. Signal path. J : CD PLAY
7-4. PRINTED WIRING BOARDS RF Section See page 25 for Circuit Boards Location.

(Page 28)

Semiconductor Location
Ref. No. IC101 IC201 Q101 Location H-4 I-3 F-5
7-5. SCHEMATIC DIAGRAM RF Section
See page 36 for Waveforms. See page 37 for IC Block Diagrams.

(Page 30)

The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
7-6. PRINTED WIRING BOARDS MAIN Section (1/2) See page 25 for Circuit Boards Location.
Ref. No. D201 D202 D231 D306 D307 D308 D309 D310 D311 D312 D313 IC101 IC201 IC203 IC301 IC303 IC401 Q201 Q231 Q232 Q301 Q302 Q303 Q401 Q402 Q410 Q420 Location B-6 B-6 F-8 F-5 F-5 G-4 F-4 G-4 F-3 F-6 F-3 C-8 F-8 G-10 G-3 F-3 C-6 (Page 32) E-10 F-7 F-8 F-5 F-5 F-4 D-8 D-8 C-6 B-6 (Page 26)
7-7. PRINTED WIRING BOARDS MAIN Section (2/2) See page 25 for Circuit Boards Location.
Ref. No. IC304 IC305 Location G-1 E-1
7-8. SCHEMATIC DIAGRAM MAIN Section (1/2) See page 36 for Waveforms. See page 37 for IC Block Diagram.

(Page 27)

7-9. SCHEMATIC DIAGRAM MAIN Section (2/2) See page 36 for Waveforms. See page 37 for IC Block Diagrams.

(Page 33)

PRINTED WIRING BOARDS FM/POWER Section
See page 25 for Circuit Boards Location.
Ref. No. D310 D701 D702 D703 IC304 IC701 IC781 Q701 Q702 Q781 Q782 Location B-3 D-3 D-2 B-4 C-4 E-3 E-4 D-3 D-4 D-2 C-2

Ref. No. D301 D302 D311 D312 D313 Q301 Q308 Q309 Q310 Q311 Q703 Location B-4 C-4 C-4 C-4 A-1 A-4 A-2 A-3 A-4 A-4 D-4
7-11. SCHEMATIC DIAGRAM FM/POWER Section See page 36 for Waveforms. See page 37 for IC Block Diagrams.

(Page 31)

IC PIN FUNCTION DESCRIPTION
Pin Name NC AMUTE CDXLT CDDATA CDCLK CDON ELVON NC LCDON LCDCE RESET GND XTAL EXTAL TEXTSEL LCDINH LCDDATA LCDCLK CFSEL EEINIT EEDATA EECLK VSS AVREF VDD SINGLE LDON AGCHOLD RFAGC H.TEMP KEYIN EHS MCK NC ACCIN EJECT I/O O O O O O O O O I O I I O O O I I I/O O I I O O I/O I I I I I I Not used (open) Audio line muting on/off control signal output terminal H: muting on Serial data latch pulse signal output to the CXD2598Q (IC101) Serial data output to the CXD2598Q (IC101) Serial data transfer clock signal output to the CXD2598Q (IC101) D/A converter and servo section power supply on/off control signal output H: power on Mechanism deck section power supply on/off control signal output H: power on Not used (open) The LCD in remote commander and FM transmitter section power supply on/off control signal output H: power on Chip enable signal output to the LCD driver in remote commander System reset signal input from the reset switch (SW302) and reset signal generator (IC303) L: reset For several hundreds msec. after the power supply rises, L is input, then it changes to H Ground terminal Main system clock output terminal (12 MHz) Main system clock input terminal (12 MHz) CD text on/off setting terminal L CD text on 434RF: fixed at H (open) 530RF/535RF: fixed at L Inhibit signal output to the LCD driver in remote commander Serial data output to the LCD driver in remote commander Serial data transfer clock signal output to the LCD driver in remote commander Custom file on/off setting terminal L custom file on 434RF: fixed at H (open) 530RF/535RF: fixed at L Initialize signal input for the EEPROM (IC203) H: format 434RF: not used (open) 530RF/535RF: fixed at L Two-way data bus with the EEPROM (IC203) (530RF/535RF only) 434RF: not used (open) Serial data transfer clock signal output to the EEPROM (IC203) (530RF/535RF only) 434RF: not used (open) Ground terminal (for A/D converter) Reference voltage (+5V) input terminal (for A/D converter) Power supply terminal (+5V) (for A/D converter) Setting terminal for the single disc/multiple discs mode L: single mode, H: multiple discs mode Fixed at H in this set (open) The laser automatic power control on/off signal output H: automatic power control on RF AGC hold on/off signal output H: hold RF AGC level control signal output L (O) : off, I: 40%, H (O) : 60% High temperature sensor input terminal Not used (open) Key input terminal (A/D input) from the remote commander Elevator height position detect input from the RV202 (elevator height sensor) (A/D input) Input of signal for the fine adjustment (elevator height (address) adjustment; RV201) of elevator position (A/D input) Not used (open) Accessory detect signal input terminal L: accessory on Eject switch (SW301) input terminal H active

1.4 0.3 Vp-p

4.1 Vp-p

5.6 Vp-p

2 IC101 qf (FE) (play mode)
22.8 s 2 IC101 ia (BCK), is (BCKI) (play mode)

26.3 s

2 IC(XOUT) (play mode)

2.9 Vp-p 5.7 Vp-p

Apporx. 63 mVp-p

139 ns 470 ns

3 IC101 qd (TE) (play mode)
3 IC101 ih (XTAI) (play mode)
3 IC781 qa (FMIN) (play mode)

240 mVp-p

Approx. 63 mVp-p
60 ns 4 IC101 wf (SCOR), IC201 is (SCOR) (play mode)

11.3 ns

5 Vp-p
13.4 ms 5 IC201 ra (EXTAL) (play mode)

4.4 Vp-p

IC Block Diagrams RF Board IC101

CXA2596M-T6

VCC 23 LC/PD 22 LD ON APC LD AMP 21 HOLD SW APC PD AMP

AGCVTH LD

AGC COMPARATOR

20 AGCCONT

19 RF BOT 18 RFTC
COMPARATOR 17 RF I A B C D VEE 9
RF SUMMING AMP FOCUS ERROR AMP

RF EQ AMP

16 RFO 15 RFE 14 FE

F 10 E 11

F I-V AMP E I-V AMP VCC

TRACKING ERROR AMP

CENTER VOLTAGE GENERATOR VEE
FWD REV VCC2 VLO VLO+ 3 4

LA6556

THERMAL SHUT DOWN INPUT 36 CH2-4 MUTE CH1 MUTE OUTPUT CONTROL + LEVEL SHIFT 9 LEVEL SHIFT 5VREG + 23 + 20 + 19 REG-OUT REG-IN VIN3+ VIN3 VIN3 VIN2+ VIN2 VIN2 VIN1+B + 31 + 28 S-GND MUTE2

MUTE1 VIN4 VIN4

VO4+ VO4
VIN4+ VREF-IN VIN1 (VREF)-SW VREF-OUT (CH1)

VO3+ VO3

VIN1/VREF SWITCH
LEVEL SHIFT VOVO1+ 12 VOVCCVIN1 15
VIN1A 16 AMP-A VIN1+A 17 +

VIN1B 18

LEVEL SHIFT

VO2+ 10

MAIN Board IC101 CXD2598Q
BIAS AVDD3 PCO FILI FILO CLTV AVDD0 PCMDI PCMD LRCKI AVSS3 AVSS0 DOUT MD2 VSS VPCO V16M VCTL RFAC ASYI ASYO LRCK VDD ASYE RFDC CE TE SE
50 FE 49 VC 48 XTSL XVSS 88 AVDDOVER SAMPLING DIGITAL FILTER 3rd-ORDER NOISE SHAPER INTERNAL BUS FOCUS SERVO AOUTAINLOUT1 AVSS1 AVSS2 LOUT95 + + SLED SERVO VC VC SUB CODE PROCESSOR 37 FSTIO 36 SSTP 35 MDP 34 LOCK 33 PWMI 32 FOK 31 DFCT LOW-PASS FILTER PWM EFM DEMODULATOR TRACKING SERVO 32k RAM ERROR CORRECTOR PWM GENERATOR FOCUS PWM GENERATOR TRACKING PWM GENERATOR SLED PWM GENERATOR TES1 TEST VSS VDD FRDR FFDR TRDR TFDR SRDR SFDR DIGITAL CLV 30
CLOCK GENERATOR BCK BCKI ENPH EMPHI A/D CONVERTER SERIAL-IN INTERFACE D/A INTERFACE DIGITAL OUT DIGITAL PLL ASYMMETRY CORRECTOR

Description SHEET (LEAD RETAINER) SPRING (FEED), LEAF HOLDER (SLED. S) ASSY GEAR (SL MIDWAY) OPTICAL PICK-UP KSS-720A/K1RP SHAFT (FEED) ASSY
Ref. No. 207 * 210 M101 M102
Part No. 3-010-263-01 1-676-524-11 A-3301-954-A 1-676-341-11 A-3315-151-A A-3301-998-A
Description DETENT (SHAFT THRUST) LSW BOARD BASE (OPT. S) (J) ASSY OP FLEXIBLE BOARD SLED MOTOR ASSY (251) SPINDLE MOTOR (S) SUB ASSY
NOTE: Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. -XX and -X mean standardized parts, so they may have some difference from the original one. RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable
SECTION 9 ELECTRICAL PARTS LIST
Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. SEMICONDUCTORS In each case, u: , for example: uA. : A. uPA. : PA. uPB. : PB. uPC. : PC. uPD. : PD. CAPACITORS uF: F COILS uH: H The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifis par une marque 0 sont critiquens pour la scurit. Ne les remplacer que par une pice portant le numro spcifi. When indicating parts by reference number, please include the board.

Ref. No. *

Ref. No. C782 C783 C784 C785 C786
Part No. 1-162-920-11 1-162-970-11 1-162-970-11 1-126-514-11 1-165-176-11
Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 27PF 0.01uF 0.01uF 22uF 0.047uF 0.047uF 1uF 5% 10% 10% 20% 10% 10% 10%
Remark 50V 25V 25V 10V 16V 16V 10V
A-3326-027-A FM BOARD, COMPLETE ******************* < CAPACITOR > C301 C303 C304 C305 C319 C320 C321 C322 C323 C324 C325 C326 C328 C329 C331 C701 C702 C703 C704 C705 C706 C707 C708 C709 C710 C711 C712 C713 C714 C715 C716 C720 C741 C742 C743 C761 C762 C763 C781 1-163-809-11 1-127-820-11 1-109-982-11 1-128-499-11 1-109-982-11 1-115-866-11 1-163-009-11 1-125-972-61 1-125-837-11 1-124-584-00 1-162-927-11 1-162-927-11 1-162-927-11 1-162-927-11 1-162-927-11 1-126-514-11 1-163-009-11 1-162-915-11 1-162-927-11 1-115-866-11 1-162-927-11 1-162-997-11 1-162-915-11 1-162-916-11 1-162-917-11 1-162-913-11 1-162-970-11 1-162-923-11 1-163-243-11 1-107-725-11 1-109-982-11 1-162-970-11 1-162-964-11 1-162-964-11 1-115-872-11 1-162-964-11 1-162-964-11 1-115-872-11 1-162-920-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP ELECT CERAMIC CHIP ELECT CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 0.047uF 4.7uF 1uF 220uF 1uF 4.7uF 0.001uF 100uF 1uF 100uF 100PF 100PF 100PF 100PF 100PF 22uF 0.001uF 10PF 100PF 4.7uF 100PF 10PF 10PF 12PF 15PF 8PF 0.01uF 47PF 47PF 0.1uF 1uF 0.01uF 0.001uF 0.001uF 2.2uF 0.001uF 0.001uF 2.2uF 27PF 10% 10% 20% 10% 20% 10% 20% 10% 20% 5% 5% 5% 5% 5% 20% 10% 0.5PF 5% 20% 5% 0.5PF 0.5PF 5% 5% 0.5PF 10% 5% 5% 10% 10% 10% 10% 10% 20% 10% 10% 20% 5% 25V 16V 10V 16V 10V 35V 50V 16V 6.3V 10V 50V 50V 50V 50V 50V 10V 50V 50V 50V 35V 50V 50V 50V 50V 50V 50V 25V 50V 50V 16V 10V 25V 50V 50V 50V 50V 50V 50V 50V

X701 1-567-093-00 VIBRATOR, CRYSTAL (38kHz) X781 1-760-838-21 VIBRATOR, CRYSTAL (7.2MHz) ************************************************************** * 1-676-524-11 LSW BOARD ********** < SWITCH > SW3 1-529-565-11 SWITCH, PUSH (1 KEY) (LIMIT) ************************************************************** * * A-3294-791-A MAIN BOARD, COMPLETE (530RF/535RF) A-3294-792-A MAIN BOARD, COMPLETE (434RF) ********************* 1-676-339-11 MAIN FLEXIBLE BOARD 3-046-988-01 PLATE (MAIN), SHIELD < CAPACITOR > C101 C102 C103 C104 C110 C111 C112 C120 C121 C122 C123 C124 C125 C126 C127 C129 C130 C140 C141 C142 C143 C144 C145 C201 C202 1-164-156-11 1-164-156-11 1-164-156-11 1-162-970-11 1-162-965-11 1-162-965-11 1-115-467-11 1-162-967-11 1-164-156-11 1-115-566-11 1-162-970-11 1-162-965-11 1-165-176-11 1-164-156-11 1-162-960-11 1-164-156-11 1-164-156-11 1-162-963-11 1-162-963-11 1-164-217-11 1-164-217-11 1-126-382-11 1-126-382-11 1-107-826-11 1-164-156-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.01uF 10% 0.0015uF 10% 0.0015uF 0.22uF 0.0033uF 0.1uF 4.7uF 0.01uF 0.0015uF 0.047uF 0.1uF 220PF 0.1uF 0.1uF 680PF 680PF 150PF 150PF 100uF 100uF 0.1uF 0.1uF 10% 10% 10% 10% 10% 10% 10% 10% 25V 25V 25V 25V 50V 50V 10V 50V 25V 10V 25V 50V 16V 25V 50V 25V 25V 50V 50V 50V
10% 10% 5% 5% 20% 20% 10%
50V 16V 16V 16V 25V (530RF/535RF) 25V 25V 25V 25V 25V 25V 10V 6.3V 25V 5.5V 16V 10V 16V
C203 C204 C205 C301 C302 C303 C307 C308 C309 C310 C311 C312 C313
1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-164-156-11 1-165-112-11 1-125-837-11 1-164-156-11 1-125-701-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP DOUBLE LAYER
0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.33uF 1uF 0.1uF 0.047F 100uF 1uF 100uF

1-216-295-00 SHORT

< VARIABLE RESISTOR > RV701 RV702 1-238-092-11 RES, ADJ, CERMET 1-238-086-11 RES, ADJ, CERMET 47K 470

20% 10%

1-126-382-11 ELECT 1-115-156-11 CERAMIC CHIP 1-126-382-11 ELECT

20% 20%

Ref. No. C314 C315 C316 C317 C318 C319 C401 C402 C404 C405 C406 C407 C416 Part No. Description 0.1uF 1000uF 100uF 0.1uF 100uF 0.1uF 470PF 470PF 10uF 10uF 100PF 100PF 100uF 20% 20% 20% 10% 10% 20% 20% 5% 5% 20% Remark 25V 16V 16V 25V 16V 25V 50V 50V 16V 16V 50V 50V 16V R101 R111 R112 R114 R115 R116 R117 R120 R121 R122 R123 R124 R125 R126 R140 R141 R142 R143 R144 R145 R146 R147 R201 R202 R203 1-216-833-11 1-216-833-11 1-216-845-11 1-216-833-11 1-216-833-11 1-216-837-11 1-216-845-11 1-216-839-11 1-216-845-11 1-216-845-11 1-216-833-11 1-216-827-11 1-216-827-11 1-216-857-11 1-216-834-11 1-216-834-11 1-216-834-11 1-216-834-11 1-216-834-11 1-216-834-11 1-216-833-11 1-216-833-11 1-216-821-11 1-216-845-11 Ref. No. Part No. Description < RESISTOR > RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP 10K 10K 100K 10K 10K 22K 100K 33K 100K 100K 10K 3.3K 3.3K 1M 12K 12K 12K 12K 12K 12K 10K 10K 1K 100K 47K 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W Remark 1-164-156-11 CERAMIC CHIP 1-115-466-00 ELECT 1-126-382-11 1-164-156-11 1-126-382-11 1-164-156-11 1-162-962-11 1-162-962-11 1-126-157-11 1-126-157-11 1-162-927-11 1-162-927-11 ELECT CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT CERAMIC CHIP CERAMIC CHIP

1-216-821-11 METAL CHIP < SWITCH >
1-529-566-21 SWITCH, PUSH (1 KEY) (CHUCKING END DETECT) SW2 1-529-566-21 SWITCH, PUSH (1 KEY) (SAVE END DETECT) ************************************************************** * 1-676-722-11 SW BAORD ********* < SWITCH > SW301 1-571-532-21 SWITCH, TACTIL (Z) SW302 1-571-532-21 SWITCH, TACTIL (RESET) ************************************************************** MISCELLANEOUS ************** 27 1-676-735-11 1-676-339-11 1-792-043-11 A-3301-964-A 1-792-045-11 FM FLEXIBLE BOARD MAIN FLEXIBLE BOARD CORD (WITH CONNECTOR) (POWER) RELAY BOX ASSY CORD (WITH CONNECTOR) (ANT-OUT) (for RELAY BOX ASSY)
1-107-826-11 CERAMIC CHIP < CONNECTOR >
CN102 1-778-303-21 CONNECTOR, FPC (ZIF) 16P CNJ101 1-778-777-21 CONNECTOR, FPC 26P < IC > IC101 IC201 8-752-095-36 IC CXA2596M-T6 8-759-653-67 IC LA6556 < TRANSISTOR > 28 Q101 8-729-141-48 TRANSISTOR < RESISTOR > 29 R101 1-216-847-11 METAL CHIP 150K 5% 1/16W 2SB624T1-BV345 29
1-792-044-11 CORD (WITH CONNECTOR) (CD-OUT) (for RELAY BOX ASSY) A-3220-731-A WIRED REMOTE COMMANDER (RM-X87) (530RF/535RF) A-3220-733-A WIRED REMOTE COMMANDER (RM-X88) (434RF)
Ref. No. F1 F2 M101 M102 M103 M104 RV202

Ref. No.

1-792-596-11 CABLE (WITH CONNECTOR) (for RM-X87/X88) 8-820-103-03 OPTICAL PICK-UP KSS-720A/K1RP 1-676-341-11 1-532-798-11 1-532-731-11 A-3315-151-A A-3301-998-A OP FLEXIBLE BOARD FUSE (BLADE TYPE) (AUTO FUSE) (1A/32V) FUSE (BLADE TYPE) (AUTO FUSE) (3A/32V) SLED MOTOR ASSY (251) SPINDLE MOTOR (S) SUB ASSY
3-867-770-11 MANUAL, INSTRUCTION, INSTALL (ENGLISH, SPANISH, CHINESE) (535RF) 9-939-196-01 HOLDER, BATTERY (for RM-X89) (530RF/535RF) A-3291-950-C MAGAZINE (250T) ASSY A-3220-731-A WIRED REMOTE COMMANDER (RM-X87) (530RF/535RF) A-3220-733-A WIRED REMOTE COMMANDER (RM-X88) (434RF) ************************************************************ PARTS FOR INSTALLATION AND CONNECTIONS ************************************** 501 * 508 3-040-583-21 X-3369-824-1 not supplied 4-916-258-01 1-792-043-11 BRACKET SCREW ASSY TAPE, MAGIC (for RM-X89) (530RF/535RF) CORD (WITH CONNECTOR) (POWER)
A-3301-123-A ELJ MOTOR ASSY (CHUCKING) A-3301-123-A ELJ MOTOR ASSY (ELEVATOR) 1-227-137-11 RES, VAR, SLIDE 10K (ELEVATOR HEIGHT SENSOR) ************************************************************ ************** HARDWARE LIST ************** #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 7-685-862-09 7-685-792-09 7-685-781-09 7-624-104-04 7-627-554-07 7-628-253-00 7-627-553-27 7-624-102-04 7-627-850-28 7-627-000-00 SCREW +BVTT 2.6X6 (S) SCREW +PTT 2.6X6 (S) SCREW +PTT 2X4 (S) STOP RING 2.0, TYPE -E SCREW, PRECISION +P 2X2.2 SCREW +PS 2X4 SCREW, PRECISION +P 2X2.5 STOP RING 1.5, TYPE -E SCREW, PRECISION +P 1.4X3 SCREW, PRECISION +P 1.7X2.2 TYPE 3
A-3301-964-A RELAY BOX ASSY 1-792-045-11 CORD (WITH CONNECTOR) (ANT-OUT) (for RELAY BOX ASSY) 1-792-044-11 CORD (WITH CONNECTOR) (CD-OUT) (for RELAY BOX ASSY) 1-532-798-11 FUSE (BLADE TYPE) (AUTO FUSE) (1A/32V) 1-532-731-11 FUSE (BLADE TYPE) (AUTO FUSE) (3A/32V)

#11 7-627-553-37 PRECISION SCREW +P 2X3 TYPE 3 ************************************************************ ACCESSORIES & PACKING MATERIALS ******************************** 1-418-783-11 WIRELESS REMOTE COMMANDER (RM-X89) (530RF/535RF) 3-867-765-11 MANUAL, INSTRUCTION (ENGLISH, FRENCH) (530RF) 3-867-766-11 MANUAL, INSTRUCTION, INSTALL (ENGLISH, FRENCH) (530RF) 3-867-767-11 MANUAL, INSTRUCTION (ENGLISH, FRENCH) (434RF: US, Canadian) 3-867-767-21 MANUAL, INSTRUCTION (ENGLISH, SPANISH, CHINESE) (434RF: E) 3-867-767-31 MANUAL, INSTRUCTION (ENGLISH, SPANISH, SWEDISH, PORTUGUESE) (434RF: AEP, UK) 3-867-767-41 MANUAL, INSTRUCTION (FRENCH, GERMAN, DUTCH, ITALIAN) (434RF: AEP, UK) 3-867-767-51 MANUAL, INSTRUCTION (ENGLISH, GERMAN, POLISH, GREEK, RUSSIAN) (434RF: German) 3-867-768-11 MANUAL, INSTRUCTION, INSTALL (ENGLISH, FRENCH) (434RF: US, Canadian) 3-867-768-21 MANUAL, INSTRUCTION, INSTALL (ENGLISH, SPANISH, CHINESE) (434RF: E) 3-867-768-31 MANUAL, INSTRUCTION, INSTALL (ENGLISH, SPANISH, SWEDISH, PORTUGUESE) (434RF: AEP, UK) 3-867-768-41 MANUAL, INSTRUCTION, INSTALL (FRENCH, GERMAN, DUTCH, ITALIAN) (434RF: AEP, UK) 3-867-768-51 MANUAL, INSTRUCTION, INSTALL (ENGLISH, GERMAN, POLISH, GREEK, RUSSIAN) (434RF: German) 3-867-769-11 MANUAL, INSTRUCTION (ENGLISH, SPANISH, CHINESE) (535RF)

BRACKET 2

TAPPING SCREW (DIA.5 20) 4

TAPE (COMMANDER) 1

MAGIC TAPE 1

POWER CORD 1

ANT-OUT CORD 1 CD-OUT CORD 1

RELAY BOX ASSY 1

Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le nemro spcifi.

9-870-049-11

Sony Corporation
Mobile Electronics Division Company
2000A0574-1 Printed in Japan C 2000. 1 Published by General Engineering Dept.