IRMT-4 REMOTE CONTROL

USER'S INSTRUCTIONS

Gecko Electronics Inc.

Full control of audio, video & therapeutic features on AV-equipped spas or surroundings

TABLE OF CONTENTS

Features Key Charts Replacing Batteries Programming Device Control Searching For Your Code Checking Codes Learning Mode Deleting a Learned Function Deleting All Learned Functions & Codes Reassigning Device Keys Changing Volume Lock Troubleshooting 12 13

FEATURES

Congratulations! You have just purchased one of the finest remote controls available on the market today. The present User's Instructions has been prepared to provide you with everything you need to know to use and enjoy your IRMT-4 remote control. Please read the instructions provided in this manual carefully to ensure optimal use of your IRMT-4 remote control. The IRMT-4 can control 4 of the following devices: Spa Audio equipment (CD, Tuner, Amplifier and Audio Cassette) Video equipment (TV, VCR and DVD) Home automation The IRMT-4 has 17 keys (up to 29 functions with double-function keys) and also features the following: Preprogrammed universal codes Quick Search mode IR Learning mode Reassignable device keys Ergonomic design Floatable Totally sealed 3 "AAA" batteries in watertight compartment (remote control retains values of memorized codes even after having replaced the batteries)
IRMT-4 Universal Remote Control Users Instructions

KEY CHARTS

Use the Key Charts below to learn how the IRMT-4 works. Note: When pressing a key, backlighting is turned on for 5 seconds. If backlighting is flashing in Learning mode, this is normal.
Key Charts When pressing a key, the LED blinks to show that remote control is working and sending signals. Use setup for all programming sequences. Press Power once to turn on or off the selected home entertainment device. Press tv, vcr, aux or SPA once to select a home entertainment device to control. Use volume + or volume - to increase or reduce sound volume (or to control Pump 1 and Light in Spa mode). Use channel + or channel - to change channels (or to control Pump 2 and Blower in Spa mode). Use Rewind, Play or Forward in VCR mode (or PUMP 3, AUX 1 and AUX 2 in Spa mode).
Use Stop (or LIGHT 2 in Spa mode), Pause or Record* in VCR mode.
While holding shift, press one of the following keys to select secondary functions (LED lights up above key): Use the numbers (0-9) to select channels or for all programming codes.

volume

Press mute once to turn sound off or on. Press last once to recall last channel and to page back one screen in the main menu. Press input once to switch the input of chosen device.

channel

Time-Out: 10 seconds after pressing a key, the remote will exit programming mode or current state you are in. * Record Safety: T record a program, press Record key twice. This is to prevent o accidental recordings (this applies only to VCR and AUDIO modes).
IRMT-4 Universal Remote Control Users Instructions 3

REPLACING BATTERIES

Your remote control is powered by three AAA batteries.
1Unscrew and remove bottom cap. Note: You can use a coin to unscrew cap.
2 Insert new batteries, making sure to match plus (+) ends with plus markings on the battery case. Refer to the label under your remote or see illustration below. 3 Replace cap ensuring that waterproof gaskets are correctly positioned.

Label under the remote:

MADE IN CANADA

MODEL: SERIAL:

AAA AAA AAA
PROGRAMMING DEVICE CONTROL
The IRMT-4 can control up to four different devices. Carry out the following instructions for each device you want to control.
Default setup code numbers: TV 0047 RCA VCR 0060 RCA AUX 1023 Pioneer 1 Turn on a device (e.g., VCR) and, if applicable, insert media (e.g., video cassette). Note: Please read steps 2-4 completely before proceeding. We recommend highlighting the codes and device you wish to program before moving on to step 2. 2 On the IRMT-4, press mode key once (i.e., tv, vcr, aux or SPA). Press and hold setup until LED blinks twice, then release key. 3 Use the Code Table (at the end of this manual) to locate brand name and type of device. Then, enter the four-digit code for your device. If performed correctly, the LED will blink twice. Remember to press and hold shift key first to access numbers (0-9). Note: If LED did not blink twice, then repeat steps 2-3 and try entering the same code again. 4 Aim IRMT-4 at device and press Power once. It should turn off. If it does not respond, repeat steps 23, trying each code for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code). 5 Repeat steps 1-4 for each device you want the IRMT-4 to control.

TV VCR AUX SPA

Code for TV Code for VCR, Audio Cassette, DVD, LDP DAT , Code for Amplifier, Tuner, Misc. Audio, CD, Home Automation Code for the SPA (0420)
Write down your setup code numbers in the chart below, for future reference. Setup code numbers: TV VCR AUX SPA
Note: The code for your Sony CDXC6750 or CDX-C5000 Radio/CD is 0179.

SEARCHING FOR YOUR CODE

If your device does not respond to the IRMT-4 after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code.
Simply substitute the appropriate mode key (i.e., tv, vcr, aux or SPA) for the device you are searching for and repeat steps 1-5.
1 On the IRMT-4, press mode key once (tv, vcr, aux or SPA).
2 Press and hold setup until LED blinks twice, then release key.

3 Enter 9-9-1. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9).
4 Aim remote control at TV and slowly alternate between pressing Power and tv. Stop when the TV turns on.
Note: Instead of pressing Power, you can use 0, 1, 2, 3, channel +, volume +, Play and Stop. In Search mode, IRMT-4 will send IR codes from its library to the selected device, starting with the most popular code first.
5 Press setup once to lock in the code.

CHECKING CODES

If you have set up the IRMT-4 using the "Searching For Your Code" procedure, you may need to find out which four-digit code is operating your equipment.
Simply substitute the appropriate mode key (i.e., tv, vcr, aux or SPA) for the device you are checking and repeat steps 1-5.
3 Enter 9-9-0. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9).
4 T view the code for o the first digit, press 1 once. Wait 3 seconds, then count the LED blinks (e.g., 3 blinks = 3) and write down the number.
Note: If a code digit is "0", LED will not blink.
5 Repeat step 4 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.

LEARNING MODE

The IRMT-4 has the ability to learn new functions from your original remote controls.
Note: To optimize success, the learning process should be conducted in an area where there is a low level of IR emission. High levels of natural light or energy efficient fluorescent lights could interfere with a learning event. The source and target (learner) remotes should be no more than 1 to 2 inches apart during a learning event and the IR LEDs of the two units should be aligned with each other. The learning operation is initiated as follows:
3 Press mode key (tv, vcr,aux or SPA). 1 Press and hold setup until LED blinks twice to initiate Learning mode, then release key. 6 Press and hold key to be taught until LED on IRMT-4 blinks twice. 7 LED turns off. 8 Repeat steps 3-7 as often as desired (up to limit of memory). 9 Exit Learning mode by pressing setup, or by time-out (if remote remains untouched for more than 10 seconds).
2 Enter 9-7-5. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9).
4 Hold teaching remote close to LED. 5 On the IRMT-4, press key to be learned. LED flashes rapidly.
At step 6, one long blink indicates learning failure, which could be: - Bad capture (try again) - Memory full (delete some other function)* - Unlearnable code At step 2, one long blink indicates low battery or memory full (i.e. the unit will not go into Learning mode if either of these conditions exist). * If your memory is full, delete one function (setup, 9, 7, 6; see page 9) or delete all (setup, 9, 8, 1 or 9, 8, 0; see page 10).

1" to 2"

DELETING LEARNED FUNCTION
If your memory is full, you will need to delete one or more functions on your IRMT-4. Here is how to delete one function:
Deleting a learned function: 3 Press mode key once (tv, vcr, aux or SPA). 4 Now press twice on key you want to delete. Learned function reverts to original function. The LED blinks two times, pause then blinks 2 more times after successful completion of the programming sequence. There will be 2 blinks and one long blink if there is a problem with the remote. The remote goes back to normal operation after 10 seconds.
1 Press and hold setup until LED blinks twice, then release key.
2 Enter 9-7-6. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9).
Limitations: 1 There are certain device codes which are not learnable. 2 The unit can learn only one code per key. 3 All keys with the exception of shift, setup and the mode keys (tv, vcr, aux, SPA) can be learned on. 4 During a learning event, the source remote and target should be no more than 1 to 2 inches apart. 5 The learning process should be conducted in an area where there is a low level of IR emission. High levels of natural light or energy efficient fluorescent lights could interfere with a learning event. 6 In general, it is not recommended to learn a function to Record key because it requires a double key press to send the record function in normal operation. 7 Typically, there are up to 24 keys that can be learned.
DELETING FUNCTIONS & CODES
If your memory is full, you will need to delete one or more functions on your IRMT-4. Here is how to delete all functions and codes:
Deleting all learned functions: All learned functions are deleted and remote reverts to original functions. The LED blinks two times, pause then blinks 2 more times after successful completion of the programming sequence.
2 Enter 9-8-0. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9). The remote resets all learned functions and codes. The LED blinks two times, pause then blinks 2 more times after successful completion of the programming sequence.
Deleting all learned functions and codes:
2 Enter 9-8-1. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9).

REASSIGNING DEVICE KEYS

The IRMT-4 can be set up to control a second TV or VCR, or any combination of three home entertainment devices.
For example, to have the IRMT-4 control a TV and two VCRs, you will need to reassign the unused aux key to operate the second VCR as follows:
1 On the IRMT-4, press and hold setup until LED blinks twice, then release key.

2 Enter 9-9-2. LED blinks twice. Remember to press and hold shift key first to access numbers (0-9).
3 Press vcr once, then press aux once.
4 The aux key is now ready to be programmed for your second VCR. See Programming Device Control. T reassign other o device keys, repeat steps 1-4 by substituting the key sequence from the chart opposite for the most popular devices.
To reassign key: Sequence
TV as 2nd VCR key: TV as 2nd AUX key: TV back to TV: VCR as 2nd TV key: VCR as 2nd AUX key: VCR back to VCR: AUX as 2nd TV key: AUX as 2nd VCR key: AUX back to AUX:

Perform

setup-9-9-2-vcr-tv setup-9-9-2-aux-tv setup-9-9-2-tv-tv setup-9-9-2-tv-vcr setup-9-9-2-aux-vcr setup-9-9-2-vcr-vcr setup-9-9-2-tv-aux setup-9-9-2-vcr-aux setup-9-9-2-aux-aux

CHANGING VOLUME LOCK

The IRMT-4 is set to control volume of device through your TV while in TV or VCR mode.
Note: In an Audio mode, you have separate control of your audio device's volume. If your TV is not remote controllable, or if you want volume to be controlled by a different device, you can change the Volume Lock setting to control a volume through a nonassociated mode (e.g., through the aux. in TV mode). To change Volume Lock to another mode:
2 Enter 9-9-3 and then press any mode key once (except tv). LED will blink twice.
3 Now, whenever you press volume +, volume - or mute, volume will be controlled by the mode you chose.
To change Volume Lock back to TV mode:
2 Enter 9-9-3 and then press tv. LED will blink twice.
3 Now, whenever you press volume +, volume - or mute on the IRMT-4, volume will be controlled by your TV.

TROUBLESHOOTING

If you have a problem with your remote control, refer to the list below:
Problem: Solution: LED does not blink when you press a key. Replace the batteries with three new AAA alkaline batteries (refer to page 4 of this manual).

Problem:

LED blinks when you press a key, but home entertainment device or SPA does not respond. Make sure the IRMT-4 is aimed at your home entertainment device and is not farther than 15 feet away.

Solution:

IRMT-4 does not control home entertainment devices or commands are not working properly. Try all listed codes for the device brands being set up. Make sure they can be operated with an infrared remote control.

Problem: Solution:

No volume on a second TV. Follow instructions in Changing Volume Lock.

IRMT-4

Infrared remote control

User's manual

Giving full control to wet fingers!

roof! aterp W

IRMT-4 Aeware instructions

table of contents

Table of contents
features... 3 key charts... 4 replacing batteries... 8 programming device control... 9 searching for your code.. 10 checking codes... 12 learning mode.... 14 deleting a learned function... 16 deleting all learned functions & codes.. 18 reassigning device key... 20 changing volume lock... 22 troubleshooting... 24 code table... 25

features

Main features
The IRMT-4 Aeware can control 4 of the following devices: Spa Audio equipment (in.tune, CD, Tuner, Amplifier and Audio Cassette) Video equipment (TV, VCR and DVD) Home automation

Congratulations!

You own the industrys best remote control. Your control is waterproof and designed to provide hours and hours of troublefree usage. For best results, please remove the control from the water when the spa is not in use. Prolonged exposure to the hot water in your spa may create humidity build-up inside your control. This will not affect the operation of the remote but may alter its appearance. Please read the instructions provided in this manual carefully to ensure optimal use of your IRMT-4 Aeware remote control.
The IRMT-4 Aeware has 17 keys (up to 29 functions with double-function keys) and also features the following: Preprogrammed universal codes Quick Search mode IR Learning mode Reassignable device keys Ergonomic design Floatable Totally sealed 3 AAA batteries in watertight compartment (codes values are memorized even after replacing the batteries) 3

key charts

Key/Icon

Description

When pressing a key, the red LED blinks to show that the remote control is working properly and sending signals. Use setup for all programming sequences. Press Power once to turn on or off the selected home entertainment device. Press tv, vcr, CD or SPA once to select tv vcr a home entertainment device to control. Spa mode: Use CH + or CH - to control Pump 2 and Blower. CD mode (radio): Press CH + or - to go to the next or previous preset station. Press and hold CH + or - to make a seek up or down to the next station. Scan mode stops as soon as a strong station is found. CD mode (weather band): Use CH + or - to go to the next or previous memorized station. CD mode (MP3): Use CH + or CH - to select file up or down. Other modes (TV/VCR): Use CH + or CH - to change channels up or down.
Press VOL + or - to increase or decrease volume Spa mode: mode Use to control Pump 1 and Light. VCR mode: Pressing *Record key will allow you to Record. CD mode: Pressing SRC will allow you to select a source between the following (in order): Tuner, CD, Aux. Spa mode: Pressing Aux 1 key will allow you to select Aux 1. VCR mode: Pressing will allow you to select Play. CD mode (MP3): Press to select folder down. Spa mode: Press to select Pump 3. VCR mode: Pressing will allow you to select rewind.
*RecordSafety:Torecordaprogram,press *RecordSafety:Torecordaprogram,press *RecordSafety:Torecordaprogram,pressRecordkeytwice.Thisistopreventaccidentalrecordings (thisappliestoVCRmodeonly).
CD mode (MP3): Press to select folder up. Spa mode: Press to select Aux 2. VCR mode: Pressing will allow you to select forward. CD mode (radio): Press Band to select between FM1, FM2, FM3, AM1, AM2 and WB (weather band). Spa mode: Press VCR mode: Press to select Light 2. to select stop.

CD mode: Press to mute the audio output. Press again to return to previous volume level. VCR mode: Press to select pause. While holding shift, press one of the following keys to select secondary functions shift (LED lights up above key).

+ 0,1,2,3,4,5,6,7,8,9

In CD mode (radio) use the numbers (1-6) to recall preset stations. Use the numbers (0-9) for all programming codes.
CD mode: Press to access Weather band mode. Press again to turn off weather band radio and return to previous mode. Other modes (TV/ VCR): Press once to switch the input of chosen device.
CD mode: Successive presses on adjustments:
will allow you to select from one of the following
FAD-FRONT: Front speaker only. FAD-REAR: Rear speaker only. FAD-ALL: Front and rear speakers. Other modes (TV/ VCR): Press once to recall last channel.
Time-Out:10secondsafterpressingakey,theremotewillexitprogrammingmodeorcurrentstateyouarein.

replacing batteries

+ Your remote control is powered by three AAA batteries
1 Unscrew and remove bottom cap. Notes: You can use a coin to unscrew cap. When replacing batteries, it is recommended to add a lubricant (e.g. Vaseline) on cap gaskets to ensure perfect watertightness.
2 Insert new batteries, making sure to match plus (+) ends with plus markings on the battery case. Refer to the label under your remote or see illustration below. 3 Replace cap ensuring that waterproof gaskets are correctly positioned and cap is well screwed.

Label under the remote

programming device control
The IRMT-4 Aeware can control up to four different devices. Carry out the following instructions for each device you want to control.
Default setup code numbers: TV VCR RCA RCA Write down your setup code numbers in the chart below, for future reference. Setup code numbers: Mode Code TV VCR Code for TV Code for VCR, Audio Cassette, DVD, LDP, DAT Code for in.tune (0101), Amplifier, Tuner, Misc. Audio, CD, Home Automation. Code for the SPA (0420) TV VCR CD SPA 1 Turn on a device (e.g., VCR) and, if applicable, insert media (e.g., video cassette). Note: Pleasereadsteps2-4 completelybeforeproceeding.Werecommend highlightingthecodesand deviceyouwishtoprogram beforemovingontostep2. 2 On the IRMT-4 Aeware, press mode key once (i.e., tv vcr tv, vcr, CD or SPA). Press and hold setup until LED blinks twice, then release key. 3 Use the Code Table (at the end of this manual) to locate brand name and type of device. Then, enter the fourdigit code for your device. If performed correctly, the LED will blink twice. Remember to press and hold shift key first to access numbers (0-9). Note: IfLEDdidnotblinktwice, thenrepeatsteps2-3and tryenteringthesamecode again. 4Aim IRMT-4 Aeware at device and press Power once. It should turn off. If it does not respond, repeat steps 2-3, trying each code for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code). 5 Repeat steps 1-4 for each device you want the IRMT-4 Aeware to control. 9

Note: ThecodeforyourSonyCDXC6750orCDX-C5000Radio CDis0179.

searching for your code

If your device does not respond to the IRMT-4 Aeware after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code.
Simply substitute the appropriate mode key (i.e., TV, VCR, CD or SPA) for the device you are checking TV VCR and repeat steps 1-5.
1 On the IRMT-4 Aeware, press mode key once (tv, tv tv, vcr vcr, CD or SPA).
2 Press and hold setup until LED blinks twice, then release key.
3 Enter 9-9-1. LED will blink twice. Remember to press and hold Shift key first to access numbers (0-9).
4 Aim remote control at TV and slowly alternate between pressing Power and TV. Stop when the tv turns on.
5 Press setup once to lock in the code.
Note: LED blinks three times when the sequence has been completed. Instead of pressing Power, you can use 0,1, 2, 3, CH +, VOL +, Power Play and Stop. In Search mode, IRMT-4 Aeware will send IR codes from its library to the selected device, starting with the most popular code first or with the current programmed code. 11

checking codes

If you have set up the IRMT-4 Aeware using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment.
Simply substitute the appropriate mode key (i.e., tv, vcr, CD or SPA) for the device you are checking tv vcr and repeat steps 1-5.
3 Enter 9-9-0. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9).
4 To view the code for the first digit, press 1 once. Then count the LED blinks (e.g., 3 blinks = 3) and write down the number.

checked codes

5 Repeat step 4 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.
Note: If a code digit is 0, LED will not blink. Remember to press and hold shift key first to access numbers (0-9).

learning mode

The IRMT-4 has the ability to learn new functions from your original remote controls.

1" to 2"

Note: To optimize success, the learning process should be conducted in an area where there is a low level of IR emission. High levels of natural light or energy efficient fluorescent lights could interfere with a learning event. The source and target (IRMT-4 Aeware) remotes should be no more than 1 to 2 inches apart during a learning event and the IR LEDs of the two units should be aligned with each other. It is important to use new batteries on the source remote. (Refer to following page to read limitations about the Learning mode.)
The learning operation is initiated as follows:
1 Press and hold setup until LED blinks twice to initiate Learning mode, then release key. 2 Enter 9-7-5. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9).

3 Press mode key (tv, vcr,CD tv tv, vcr or SPA). 4Hold teaching remote close to LED. 5 On the IRMT-4, press key to be learned. LED flashes rapidly. 6Press and hold key to be taught until LED on IRMT-4 blinks twice.
7 LED turns off. 8Repeat steps 3-7 as often as desired (up to limit of memory). 9Exit Learning mode by pressing and holding setup until LED blinks twice, or by time-out (if remote remains untouched for more than 10 seconds).
At step 6, one long blink indicates learning failure, which could be: - Bad capture (try again) - Memory full (delete some other function)* - Unlearnable code At step 2, one long blink indicates low battery or memory full (i.e. the unit will not go into Learning mode if either of these conditions exist). * If your memory is full, delete one function (setup, 9, 7, 6; see page 16) or delete all (setup, 9, 8, 1 or 9, 8, 0; see page 18).
deleting learning function
If your memory is full, you will need to delete one or more functions on your IRMT-4 Aeware. Here is how to delete one function:
Deleting a learned function:
1 Press and hold setup until LED blinks twice, then release key. 2 Enter 9-7-6. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9). 3 Press mode key (tv, vcr, CD tv tv, vcr or SPA). 4Now press twice on key you want to delete. Learned function reverts to original function. The LED blinks two times after successful completion of deleting sequence. There will be 2 blinks and one long blink if there is a problem with the remote. Remote goes back to normal operation after 10 seconds.

Limitations:

There are certain device codes which are not learnable (or others that once they are learned can create a bad functionnality). The unit can learn only one code per key. All keys with the exception of shift, setup and the mode keys shift (tv, vcr, CD, SPA) can be learned on. During a learning event, the source remote and target should be no more than 1 to 2 inches apart. The learning process should be conducted in an area where there is a low level of IR emission. High levels of natural light or energy efficient fluorescent lights could interfere with a learning event. In general, it is not recommended to learn a function to Record key because it requires a double key press to send the record function in normal operation. Typically, there are up to 24 keys that can be learned.
deleting functions & codes
If your memory is full, you will need to delete one or more functions on your IRMT-4 Aeware. Here is how to delete all functions and codes:
Deleting all learned functions:

1 Press and hold setup until LED blinks twice, then release key. 2 Enter 9-8-0. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9). All learned functions are deleted and remote reverts to original functions. The LED blinks twice, pause then blinks 2 more times after successful completion of the programming sequence.
Deleting all learned functions and codes:
1 Press and hold setup until LED blinks twice, then release key. 2 Enter 9-8-1. LED will blink twice. Remember to press and hold shift key first to access numbers (0-9). The remote resets all learned functions and codes. The LED blinks twice, pause then blinks 2 more times after successful completion of the programming sequence.

reassigning device keys

The IRMT-4 Aeware can be set up to control a second TV or VCR, or any combination of three home entertainment devices.
For example, to have the IRMT-4 Aeware control two TVs, you will need to reassign the unused VCR key to operate the second TV as follows:
1 On the IRMT-4 Aeware, press and hold setup until LED blinks twice, then release key.
2 Enter 9-9-2. LED blink twice. Remember to press and hold shift key first to access numbers (0-9).
3 Press TV once, then press VCR once. 4 The VCR key is now ready to be programmed for your second TV. See ProgramT ming Device Control.
To reassign other device keys, repeat steps 1-4 by substituting the key sequence from the chart opposite for the most popular devices.

To reassign key:

Sequence TV as 2nd VCR key: TV as 2nd CD key: TV back to TV: VCR as 2nd TV key: VCR as 2nd CD key: VCR back to VCR: *CD as 2nd TV key: *CD as 2nd VCR key: *CD back to CD: Perform setup-9-9-2-vcr-tv setup-9-9-2-cd-tv setup-9-9-2-tv-tv setup-9-9-2-tv-vcr setup-9-9-2-cd-vcr setup-9-9-2-vcr-vcr setup-9-9-2-tv-cd setup-9-9-2-vcr-cd setup-9-9-2-cd-cd
* When the CD key is reassigned to a different device, any controlling function of your in.tune will be disabled.

changing volume lock

The IRMT-4 Aeware is set to control volume of device through your TV while in TV or VCR mode.

Note: In an Audio mode, you have separate control of your audio device's volume. If your TV is not remote controllable, or if you want volume to be controlled by a different device, you can change the Volume Lock setting to control a volume through a non-associated mode (e.g., through the CD in TV mode).

Lock volume to one mode:

1 On the IRMT-4, press and hold setup until LED blinks twice, then release key. 2 Enter 9-9-3 and then press any mode key once (except tv). LED will blink twice (ie:.CD). 3 Now, whenever you press VOL + or VOL- on the IRMT-4, volume will always be controlled by the same device that you have chosen (ie:.CD).
Note: If you lock volume to any device, the Pump 1 and Light function in spa mode will be disabled. It's possible to re-enabled this function by unlocking Volume. (ie:. in spa mode as follows: SPA+SETUP+ 9-9-3 + VOL -.
Reset Volume control back to its original device setting:
1 On the IRMT-4 Aeware, press and hold setup until LED blinks twice, then release key. 2 Enter 9-9-3 and then press VOL +. LED will blink four times. 3 Now, whenever you press VOL + or VOL- on the IRMT4, volume will control each specific device that has been chosen (ie:.TV).

troubleshooting

If you have a problem with your remote control, refer to the list below:

Problem: Solution:

LED does not blink when you press a key. Replace the batteries with three new AAA alkaline batteries (refer to page 4 of this manual). LED blinks when you press a key, but home entertainment device or SPA does not respond. Make sure the IRMT-4 Aeware is aimed at your home entertainment device and is not further than 15 feet away. IRMT-4 Aeware does not control home entertainment devices or commands are not working properly. Try all listed codes for the device brands being set up. Make sure they can be operated with an infrared remote control.
No volume on a second TV. Follow instructions in Changing Volume Lock.

Problem:

Solution:

code table

Setup codes for TVs:
AOC Admiral Aiko Akai Alaron Ambassador America Action Ampro Anam Audiovox Baysonic Belcor Bell & Howell Bradford Brockwood Broksonic CXC Candle Carnivale Carver Celebrity 0030, 0019 0093, 0451, 0180 0092, 0019 0154, 0019 0236, 0030, Cineral Citizen 0451, 0092 0060, 0030 0056, 0180, 0039 0047, 0054 0154, 0051 0451, 0093 0060, 0030 0145, 0056 0016, 0039 0166, 0466 1147, 1347 0451, 0019 0039, 0092 0623, 0145
Dumont Dwin Electroband Emerson 0017, 0019 0720, 0154, 0236 0463, 0180 0282, 0178 0019, 0179 0039, 0177 0623, 0180, 0180 0047, 0051 0451, 0093 0282, 0178 0021, 0135 1147, 1347 0017, GoldStar 0030, 0178 0019, 0056 Gradiente 0053, 0056 Grunpy 0180, 0179 Hallmark 0178 Harley Davidson 0179 Harman/Kardon 0054 Harvard 0180 Hitachi 0145, Infinity 0054 Inteq 0017 JBL 0054 JCB 0000 JVC 0053 KEC 0180 KTV 0180, Kenwood 0030, 0019 LG 0056

Curtis Mathes Cybernex Daewoo Denon Dynatech Electrohome Electrophonic Emerex Emerson
Magnin Marantz Marta Matsushita Memorex

Orion Panasonic

Penney

Fisher Fuji Funai GE

Minolta Mitsubishi

Pentax Philco Philips

Pilot Pioneer Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RCA 0035, 0162 0454, 1162 0060, 0035 0048, 0240 0042, 0035, 0037 0048, 0047 0000, Samsung Sanky Sansui 0240, 0045 0048, 0039 0000, 0067 0209, 0047, 0240 0104, 0046 0184, 0045 0121, 0043 0035, 0037 0047, 0000 0042, 0072 0035, 0032 0000, 0033 0035, 0081 0000, 0043
Symphonic TMK Tatung Teac Technics Teknika 0041 0000, 0041 0035, 0162 0035, Thomas 0000 Toshiba 0045, 0043 Totevision 0037, 0240 Unitech 0240 Vector 0045 Vector Research 0038 Video Concepts 0045 Videosonic 0240 Wards 0060, 0035 0048, 0047 0081, 0240 0000, 0042 0072, 0149 White Westinghouse 0209, 0278 XR-1000 Yamaha Zenith 0035, 0038 0039, 0000 0209, 0033

Sanyo Scott Sears

Radio Shack Radix Randex Realistic
Semp Sharp Shintom Shogun Singer Sony Sylvania

Runco STS

Setup codes for cd players:
Aiwa Burmester California Audio Lab Carver 0157, 0029 0157, DKK 0000 Denon 0003, 0873 Emerson 0305 Fisher 0179, 0174 Garrard 0420, 0393 Genexxa 0032, 0305 Harman/Kardon 0157, 0173 Hitachi 0032 JVC 0072 Kenwood 0028, 0037 0190, Krell 0157 LXI 0305 Linn 0157 MCS 0029 MTC Magnavox Marantz Mission NSM Nikko Onkyo Optimus 0157, 0305 0029, 0174 0101, 0868 0000, 0032 0179, 0305 0037, 0420 0145, 0029, 0157, 0626 0032, 0305 0468, 0179, 0305 0053, 0764
Realistic Rotel SAE Sansui Sanyo Scott Sears Sharp Sherwood Sony Soundesign Tascam Teac Technics Victor Wards Yamaha Yorx 0179, 0157, 0157, 0037, 0180 0000, 0420, 0393 0174, 0180 0029, 0157, 0053 0036, 0187 0461
Setup codes for amplifiers:
Aiwa Carver Curtis Mathes Denon Harman/Kardon JVC Linn Magnavox Marantz Panasonic Philips Pioneer Sony Technics Victor Wards Yamaha 0269, 0892 0013, 0300 0220, 0354
Panasonic Parasound Philips Pioneer Proton QED Quasar RCA

Setup codes for tuners:

ADC Adcom Aiwa 0158, 0189 0121, 0405 Akai 0224 Capetronic 0531 Carver 0189, 0008 0042, 0360 Casio 0195 Clarinette 0195 Curtis Mathes 0080 Denon 0004 Emerson 0424 Fisher 0042, Garrard 0463, 0424 Harman/Kardon 0110, JBL 0110 JVC 0074 Kenwood 0027, 0186 0042, 0077 Koss LXI Linn Lloyds MCS Magnavox Marantz Modulaire NAD Nakamichi Onkyo Optimus 0039, 0346 0531, 0189 0195, 0391 0039, 0320 0097, 0531, 0670 0186, 0042 0177, 0181 0219, 0738 0801, 1023 0039, 0189, 0391 0531, 0014 0150, 0630

Quasar RCA 0080, 0531, 0054 0346, 0195, 0189, 0346 0219, 0801 0163, 0491, 0502 0158, 0670 0463, 0163 0039, 0074 0158, 0014 0189, Yamaha Yorx Zenith 0176, 0857
Realistic Sansui Sanyo Scott Sharp Sherwood Sony Soundesign Teac Technics Victor Wards
Panasonic Penney Philips Pioneer
Setup codes for DVD players: Harman/Kardon JVC Kenwood Magnavox Mitsubishi Onkyo Panasonic Philips Pioneer Proscan RCA Samsung Sony Technics Theta Digital Toshiba Yamaha Zenith 0490 0503, 0539 0525, 0490, 0545 0503, 0591
Setup codes for cassette players: Aiwa Carver Denon Harman/Kardon JVC Kenwood Magnavox Marantz Onkyo Optimus Panasonic Philips Pioneer Sansui Sony Technics Victor Wards Yamaha 0029, 0076 0182, 0029 0244, 0135, 0282 0027, 0029 0027, 0029 0243, 0027 0097, 0094
Setup codes for home automation: GE Lutron One For All Radio Shack Security System Universal X10 X0167 0167
Setup codes for LD players: Denon Mitsubishi NAD Pioneer Sony 0193, 0201
Setup codes for misc. audio: Aiwa 0010, Fisher 0052 Harman/Kardon 0477 JBL 0477 JVC 0073 Jerrold 0459, 0520 RCA 0056 Scientific Atlanta 0460 Sony 0010, 0159 Starcom 0459
Advanced electronics! Water resistance!
in U.S.A, available through
in Canada, available through
Spa Builders Systems Group

9919-100611

9225 Stellar Court, Corona CA, USA 92883, 1.866.639.7274

www.aeware.ca

450 des Canetons, Quebec City (Quebec) G2E 5W6 Canada,1.800.78.GECKO

Gecko Electronics Inc.