APPENDIX ONE TRANSCRIPTION CONVENTIONS
The following transcription conventions are used in the data fragments presented in this thesis (following Atkinson & Heritage 1984).1
Line of interest (.) (0.2).h,.hh,.hhh h, hh, hhh [ ] = :, ::, ::: (( )) ( ) Micropause (pause of less than 0.2 seconds) Measured pause (either 0.2 seconds or greater) Inbreath (more h represent a longer inbreath) Outbreath (more h represent a longer outbreath) Simultaneous start or overlapping talk End of overlapping talk Latching between two turns or two words within a turn Sound or syllable lengthening (more : represent more length) Glottal cut-off Transcriber comment Transcriber doubt
Phonetic transcriptions are presented using the IPA (1999).
These transcription notations were originally developed by Gail Jefferson.
APPENDIX TWO DETAILS OF CORPORA
The following corpora comprise the data investigated in this thesis.
The Holt Corpus: this corpus was recorded in a family home in the 1980s and contains around 8 hours of naturally-occurring telephone talk-in-interaction, mostly between friends and family members. Most of the interactants are male and female BritishEnglish speakers and comprise a range of regional accents and ages (the ages range from between roughly between 13 to 80 years old).
The Heritage Corpus: this corpus was also recorded in a family home in the 1980s and contains around 2.5 hours of naturally occurring telephone talk-in-interaction. The male and female interactants have a variety of British-English regional accents and an array of ages spanning from between about 16 to 80. Most of the conversations are between friends and family members.
The Rahman Corpus: this corpus was recorded in a family home in the 1970s and is composed of around 1.5 hours of conversation. It comprises male and female interactants with a range of ages (from around roughly 8 to 60 years old) and accents. Again most of the calls are between friends and family members.
The NB Corpus: this corpus was recorded in the 1960s in a family home in America. It comprises around 2.5 hours of telephone talk-in-interaction between male and female
American-English speaking friends and family members. The interactants ages range from between 10 and 65.
The SBL Corpus: this corpus was recorded in the 1960s. The calls are between male and female American-English speakers and comprise around 2.5 hours.
The Pline Corpus: this corpus was recorded in June 2001 from a radio problem line phone-in programme which broadcast local to the York area, in North Yorkshire. The recordings comprise around 2 hours of naturally occurring telephone interactions and were made onto an audio tape using a Sony CFD-E55L audio tape recorder and then digitised using the software package SoundEdit 16. In each call there were three interactants: two radio presenters(/agony aunts) and a caller from the public. The conversationalists comprise males and females with a variety of accents, and ages ranging from around 30 to 60.

PLAY MODE MONO/ST ISS xZ

Press xZ to open the tape compartment and insert a blank tape. Use TYPE I (normal) tape only.
X N To stop recording pause recording Press xZ X Press the button again to resume recording. OPERATE
With the side you want to record on facing you

/BAT OPERAT T E OPR

Select the program source you want to record. To record from the CD player, insert a CD (see page 4) and press x on the CD section. To record from the radio, tune in the station you want (see page 6).

R A AN B

Tips Adjusting the volume or the audio emphasis (see page 28) will not affect the recording level. If the MW/LW program makes a whistling sound after you've pressed z in step 3, press PLAY MODE MONO/ST ISS (Interference Suppress switch) repeatedly until the noise is at a minimum. For the best results, use the AC power as a power source. To erase a recording, proceed as follows: 1 Insert the tape whose recording you want to erase. 2 Press X. 3 Press N. 4 Press z. 5 Press X.

turn on/off the player

The Timer

Setting the clock

: indication appears in the display until you set the clock.
CLOCK DSPL ENT MEM TUNE TIME SET , +
Tip The time display system: 24-hour system
Before you set the clock, connect the power source (see page 26).
Press CLOCK for 2 seconds until the hour digit flashes.
Press TUNE TIME SET + or until you set the current hour. Then press DSPL ENT MEM. The minute digits flash. Set the minutes by pressing TUNE TIME SET + or until the correct minute is displayed.
Press DSPL ENT MEM. The clock starts from 00 seconds.

SECTION 3 DISASSEMBLY

This set can be disassembled in the order shown below.

Lower cabinet section

Front cabinet section

MAIN board

CD board

Optical pick-up section

Tape mechanism deck section
Cassette lid assy and cassette holder Head (HRP301), Motor assy (M301) and belt

Mode FWD FWD Back Tension FF REW Torque Meter CQ-102C CQ-102C CQ-201B CQ-201B Meter Reading gcm (0.42 0.97 ozinch) 1.5 5.5 gcm (0.021 0.076 ozinch) more than 60 gcm (more than 0.83 ozinch) more than 60 gcm (more than 0.83 ozinch)
SECTION 5 ELECTRICAL ADJUSTMENTS
Setting: SOUND control : OFF MEGA BASS control : OFF

TAPE DECK SECTION

Test tape
Type WS-48A Signal 3 kHz, 0 dB

0 dB=0.775 V

Used for Tape Speed Adjustment
Tape Speed Adjustment Setting: Function: TAPE
Test tape WS-48A (3 kHz, 0 dB) MAIN board CNP311 pin 4 frequency counter 3.2

MAIN board CNP311 pin 3

Tape Tension Measurement
Mode FWD Tension Meter CQ-403A Meter Reading more than 100 g (more than 3.53 oz)
Procedure: 1. Playback WS-48A (tape center) in the FWD state. 2. Adjust the volume in CAPSTAN/REEL motor (M301) so that the frequency counter reading becomes 3,000 Hz. Specified Value: 2,985 to 3,015 Hz 3. Confirm that the frequency at the beginning and that at the end of tape winding are between 2,955 to 3,045 Hz. Adjustment Location:
CAPSTAN/REEL motor (M301)

TAPE deck block

Tape speed Adjustment

TUNER SECTION

[MW/LW] Setting: Function : RADIO BAND button : MW or LW

AM RF signal generator

0 dB=1 V
AM IF ADJUSTMENT Adjust for a maximum reading on level meter 450 kHz MW VCO VOLTAGE CONFIRMATION
Put the lead-wire antenna close to the set.
MAIN board CNP311 pin 4 level meter 3.2 + MAIN board CNP311 pin 3
Frequency Display 531 kHz 1,611 kHz
Reading on Digital Voltmeter 1.0 0.3 V 5.0 0.4 V
set 30% amplitude modulation by 400 Hz signal Output level: as low as possible
MW TRACKING ADJUSTMENT Adjust for a maximum reading on level meter L3-1 CTkHz 1,404 kHz LW VCO VOLTAGE ADJUSTMENT Adjustment Part Frequency Display Reading on Digital Voltmeter L4 Confirmation 153 kHz 279 kHz

0.1 0.6 + 0.05VV

[FM] Setting: Function : RADIO BAND button: FM
FM RF signal MAIN board generator TP (ANT) 0.01 F set 22.5 kHz frequency MAIN board deviation by 400 Hz TP (GND) signal Output level: as low as possible MAIN board CNP311 pin 4 level meter 3.2 + MAIN board CNP311 pin 3

TTL IIL IIL DATA REGISTER

TTL IIL

XUGF WFCK DIGITAL CLV CPU INTERFACE EMPH GFS
C4M OSC SYSM XTAO 55 EMPHI

IIL TTL

SENSC.OUT 24 SENS2 26

XTSL CLOCK 51 GENERATOR

OPTICAL PICK-UP BLOCK (KSS-213C)

FOCUS ERROR AMP

FOCUS PHASE COMPENSATION

FE BIAS

40 X701 16.9344MHz

41 LASER DIODE 42

F E I-V AMP

TRACKING ERROR AMP

TRACKING PHASE COMPENSATION
AUTOMATIC POWER CONTROL Q701

LD AMP

PD AMP PD 37
CNPC-SENSC-XRST 5 C-SQSO 6 C-SQCK 8 C-SENS 1 C-DATA 3 C-CLOK 2 C-XLAT 9 C-SCOR

LD 12 12

BH701 (1/2) 4

7 BH503

FOCUS/TRACKING COIL DRIVE, SPINDLE/SLED MOTOR DRIVE IC702 2-AXIS DEVICE (TRACKING) (FOCUS) F+ F FOCUS COIL DRIVE FIN 25 T+ T TRACKING COIL DRIVE TIN 19
6 C-SENSC-RST 8 C-SQSO 7 C-SQCK 5 C-SENS 11 C-CLOCK C-LATCH C-DATA 1 C-SCOR FROM MAIN SECTION (Page 21)
TO MAIN SECTION (Page 21)
SYSTEM CONTROLLER IC501 (1/3)

CNPM702 (SLED) 3

CNP11 SL+ SL SLED MOTOR DRIVE SLIN
SLED SERVO IC701 (2/2) SLO SLED AMP SLP

LCD BOARD (1/3)

SP+ SP SPINDLE MOTOR DRIVE
S701 (CD LID OPEN/CLOSE DET) SPIN SPO SPI 15

M701 (SPINDLE)

MUTE 6

S701 (LIMIT)

C-DOOR

SIGNAL PATH : CD PLAY

CD MOTOR BOARD

LOUT1 67

BLOCK DIAGRAM TUNER Section

MAIN BOARD (1/3)

ANT1 FM TELESCOPIC ANTENNA

CF3 10.7MHz

FM/AM RF AMP, MIX, OSC, FM/AM IF AMP, DET, MPX IC1 CNPB.P.F. FLFM RF IN CF1, 2 10.7MHz FM IF IN

FM RF AMP

FM MIX

MIX OUT

FM IF AMP

FM DET

DET OUT AF 16 BUFFER

MPX IN

L-OUT AF AMP MPX MUTE R-OUT

CT1, L1 FM TRACKING

L1 FM RF D1 CT1

FM RF OUT

FM OSC

T1 IFT

CF4 450kHz 6

AM IF IN AM IF AMP

AM DET LEVEL DET

AM HIGH CUT SWITCH Q1

STEREO/ MONO, FM/AM
CT2, L3-1 L3 MW/LW FERRITE-ROD ANTENNA MW TRACKING
CT3, L3-2 LW TRACKING 22 Q6 LW SWITCH AM RF IN
T1 AM IF AM RF AMP AM MIX BUFFER D3 (1/2) AM OSC

AM OSC FM OSC

L3-1 MW

BUFFER

IF OUT
CT3 CT2 B+ Q6 L4 LW VCO VOLTAGE L3-2 LW Q4 Q5 D3 (2/2) L4 MW/LW OSC

21 L2 FM VCO VOLTAGE

L2 FM OSC Q7 LW SWITCH IF REQUEST SWITCH Q2 FROM MAIN SECTION (Page 21) B-MUTE

LPF1/BAND

ST IND

OSC OUT

LPF2/MO-ST

IF BUFFER

Q4, 5 MW SWITCH
MW BAND SELECT SWITCH Q8 FM/AM PLL IC2

LW BAND SELECT SWITCH Q9

CONSTANT CURRENT Q3

LP-OUT

ST-IND

LPF2/MO/ST

21 X1 75kHz 20

XOUT REFERENCE DIVIDER

LOW-PASS FILTER PHASE DETECTOR/ CHARGE PUMP 12 BIT PROGRAMMABLE DIVIDER

TUNER L-CH

UNIVERSAL COUNTER
CNP312 DI CL CCB INTERFACE R-DATA R-CLOCK R-LATCH R-COUNT TO MAIN SECTION (Page 21)

1/2 SWALLOW COUNTER

UNLOCK DETECT
SIGNAL PATH : FM : MW/LW R-CH: Same as L-CH.
SHIFT REGISTER & LATCH
6-3. BLOCK DIAGRAM MAIN Section

MAIN BOARD (2/3)

CNP304 (1/2) L-CH 1 VREF 3 R-CH TUNER L-CH MIC IN L.CD L.RAD MIC AMP MUTE MUTE SOUND CONTROL, ELECTRICAL VOLUME IC302 OUT2 CNP307 (1/2) 24 REC/PB EQ AMP IC301

POWER BOARD (1/2)

: TUNER (FM/AM) : TAPE PLAY : TAPE RECORD R-CH: Same as L-CH.
FROM CD SECTION (Page 18)

STANDBY

7 POWER AMP IC303
FROM POWER SUPPLY SECTION (Page 24)
FROM TUNER SECTION (Page 20)
R-CH BUFFER MONITOR L.LO 20 AMP 31 IN2 MATRIX SOUND CIRCUIT TONE CONTROL CIRCUIT VOLUME CONTROL CIRCUIT

BH353 (1/2) 8 L IN

STANDBY SWITCH J301 POWER AMP L OUT 3 i (HEADPHONE) RIPPLE FILTER FILTER BH2

HRP301 (REC/PB) L-CH

CNP301 2

BHL-CH 2

CNPBUFFER DATA BUZZER MUTE VC BC D322 DET LOGIC CIRCUIT VREF RADIO TAPE REC A-MUTE PORT1 L.IN PB EQ AMP CONTROL

4 R-CH

4 R-CH 4

REC EQ AMP

18 ALC

MUTE SWITCH Q3

MIXING AMP Q302
HE301 (ERASE) 3 PB REC 2 VREF 3
D321 MEGA BASS CONTROL SWITCH Q303
VREF 6 REFERENCE VOLTAGE GENERATOR
S301 (1/2) (REC/PB) CNP303 (1/2) BIAS OSC Q311 S301 (2/2) (REC/PB) PB REC REC VCC COM 5V

CNP305 (2/4)
RADIO 6V TUNER SECTION B+

RADIO 70

COM 5V REC/PB EQ AMP (IC301), TUNER SECTION B+ D363
+5V REGULATOR Q354 B+ SWITCH Q351, 352

+6V REGULATOR Q353 D908

BH502 (2/3) 8 P-CON OPR/BATT B+ BH501 (3/4) REG CHK 80 RESET SIGNAL GENERATOR IC503 AC, BATTERY CHECK QREG 8 P-CON OPR/BATT 8 5

CNP306 (2/3)

VT B+ PLL L.P.F. CIRCUIT B+

VDD (S.W)

T901 POWER TRANSFORMER J901

- AC IN

TO MAIN SECTION (Page 22) REGULATOR Q374 AC, BATTERY CHECK Q373 RECT D901 904

CNP305 (3/4)

D362 AC, BATTERY CHECK Q375

RST 30

BH354 AC-HI U-COM (VDD)
BH502 (3/3) +5V REGULATOR ICU-COM (VDD) 3

CNP306 (3/3)

D910 CNP351 D2

BATT (+) BOARD

BH902 4.5V 9V

BACK UP B+

DDCDCDC LEVEL DETECT Q367, 5 DC1 BHDCDCDC LEVEL DETECT Q368, 4 DC1 DC2
DRY BATTERY SIZE AA (IEC DESIGNATION R6) 3PCS. 4.5V (FOR BACK UP)

12 DC3 24

DC LEVEL DETECT Q369, 372
CNPB+ (VDD S.W) BH501 (4/4) 9 MOTOR ON 65 MOTOR ON 9 CNP305 (4/4) MOTOR DRIVE Q364, 365 MOTOR BRAKE SWITCH QTC-PLAY 79 TC-PLAY 3 S303 (MOTOR ON/OFF)

BATT () BOARD

M301 (CAPSTAN/REEL)
DRY BATTERY SIZE D (IEC DESIGNATION R20) 6PCS. 9V (FOR POWER SUPPLY)

S304 (TAPE PLAY)

Circuit Boards Location
PRINTED WIRING BOARDS CD Section

CD board LED board

KEY 2 board

CD MOTOR board

Semiconductor Location
Ref. No. IC701 IC702 IC703 Q701 Q702 Q703 Location C-6 E-5 B-4 D-5 A-6 A-3

KEY 1 board POWER board

(Page 33)

LCD board BATT (+) board

REC SW board KEY 3 board BATT () board MAIN board

(Page 45)

M702 (SLED)

CNP707 6

(Page 34)

1 M701 (SPINDLE) M

31 1-658-023(31)
Note on Printed Wiring Boards: X : parts extracted from the component side. Y : parts extracted from the conductor side. b : Pattern from the side which enables seeing.
6-6. SCHEMATIC DIAGRAM CD Section See page 38 for Waveforms. See page 50 for IC Block Diagrams.

(Page 41)

(Page 47)

(Page 40)

Note on Schematic Diagram: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. Note: The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. U : B+ Line. Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : CD ( ) : TUNER [ ] : TAPE Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms. Signal path. J : CD PLAY

IC PIN FUNCTION DESCRIPTION

Pin No. 79 80

Pin Name B-MUTE C-MUTE TAPE RADIO CD VDD TX TEX NC ISS1 ISS2 C-DOOR TC-PLAY REG CHK
I/O O O O O O O I O O O I I I
Description Tuner muting on/off control signal output terminal H: muting on Digital muting on/off control signal output to the CXD2589Q (IC703) H: muting on Tape function control signal output to the TA2068N (IC301) L: radio or CD on, H: tape on Power on/off control signal output for the radio +6V power supply H: radio power on Power on/off control signal output for the CD +5V power supply, and CD function control signal output to the TA2068N (IC301) L: CD power on (CD on) Power supply terminal (+5V) Sub system clock output terminal (32.768 kHz) Sub system clock input terminal (32.768 kHz) Not used (open) ISS 1 on/off control signal output terminal H: ISS 1 on ISS 2 on/off control signal output terminal H: ISS 2 on CD lid open/close detection switch (S701) input terminal L: CD lid is closed Tape play detection switch (S304) input terminal L: tape play mode Regulator check signal input of the AC input or battery input H: active

38 to 41 COM0 to COM3

6-11. PRINTED WIRING BOARDS DISPLAY Section See page 26 for Circuit Boards Location.

(Page 32)

Ref. No. D601 D602 IC501 IC502 IC503 Location A-8 A-8 C-5 B-6 C-3 Ref. No. Q501 Q502 Q503 Q504 Q505 Location B-6 B-6 D-4 C-4 C-4
6-12. SCHEMATIC DIAGRAM DISPLAY Section See page 38 for Waveforms.

(Page 31)

Note on Schematic Diagram: All capacitors are in F unless otherwise noted. pF: F 50 WV or less are not indicated except for electrolytics and tantalums. All resistors are in and 1/4 W or less unless otherwise specified. C : panel designation. U : B+ Line. Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : TUNER ( ) : CD : TAPE Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms.

VREF IN

OUT4-B

OUT4-A

OUT3-A

OUT3-B

NC OPIN-B

#1 SP201 #2 #2

120 107

#2 #12

#10 #2

112 111

Ref. No. 107 108

Part No. 3-039-300-01 3-039-301-01 X-3377-871-1 X-3377-873-1 X-3377-874-1 3-922-112-21 3-039-321-02 3-039-332-01 1-675-540-11 3-039-333-01 3-921-725-01 3-039-325-02 3-039-308-01 3-039-308-11 3-039-308-21 3-039-307-01 3-039-307-11 3-039-307-21 3-039-306-01

Description

Ref. No. 120 SP101 SP201
Part No. 3-039-306-11 3-039-306-21 3-039-305-01 3-039-305-11 3-039-305-21 3-039-304-02 3-039-304-12 3-039-304-22 3-039-303-01 3-039-303-11 3-039-303-21 3-039-323-02 3-039-302-02 3-039-302-12 3-039-302-22 3-039-335-01 3-555-858-01 1-529-478-11 1-529-478-11
Description BUTTON (FF) (M) (GREEN) BUTTON (FF) (M) (BLUE) BUTTON (REW) (m) (SILVER) BUTTON (REW) (m) (GREEN) BUTTON (REW) (m) (BLUE) BUTTON (PLAY) (N) (SILVER) BUTTON (PLAY) (N) (GREEN) BUTTON (PLAY) (N) (BLUE) BUTTON (REC) (z) (SILVER) BUTTON (REC) (z) (GREEN) BUTTON (REC) (z) (BLUE) SPRING (CASSETTE) WINDOW (CASSETTE) (SILVER) WINDOW (CASSETTE) (GREEN) WINDOW (CASSETTE) (BLUE) SHEET (CASS), ADHESIVE CUSHION (25X15X0.5) SPEAKER (L ch) SPEAKER (R ch)
LID, CASSETTE HOLDER, CASSETTE CABINET (FRONT) SUB ASSY (SILVER) CABINET (FRONT) SUB ASSY (GREEN) CABINET (FRONT) SUB ASSY (BLUE) DAMPER BRACKET (SP) LEVER (REC) REC SW BOARD BRACKET (MD) SCREW (2.6X10), +PWH SHAFT (MD) BUTTON (PAUSE) (X) (SILVER) BUTTON (PAUSE) (X) (GREEN) BUTTON (PAUSE) (X) (BLUE) BUTTON (ST/EJ) (x Z) (SILVER) BUTTON (ST/EJ) (x Z) (GREEN) BUTTON (ST/EJ) (x Z) (BLUE) BUTTON (FF) (M) (SILVER)

* * * *

109 * 112 113

UPPER CABINET SECTION

156 169

170 165

154 151

LCD501 #2

162 161
Ref. No. * 151 * 159 Part No. A-3322-188-A 3-039-322-01 3-039-334-01 3-039-337-01 3-039-337-11 3-039-337-21 X-3378-409-1 X-3378-410-1 X-3378-411-1 3-039-339-61 3-039-339-71 3-039-339-81 3-039-340-01 3-039-340-11 3-039-340-21 Description LCD BOARD, COMPLETE BRACKET (LCD) SHEET (LCD), ADHESIVE WINDOW (LCD) (SILVER) WINDOW (LCD) (GREEN) WINDOW (LCD) (BLUE) CABINET (UPPER) SUB ASSY (SILVER) CABINET (UPPER) SUB ASSY (GREEN) CABINET (UPPER) SUB ASSY (BLUE) BUTTON (CD) (SILVER) BUTTON (CD) (GREEN) BUTTON (CD) (BLUE) BUTTON (TUNE) (SILVER) BUTTON (TUNE) (GREEN) BUTTON (TUNE) (BLUE)
Remark Ref. No. * * * * 169 Part No. 3-041-268-21 1-675-538-11 1-675-539-11 1-675-537-11 3-039-314-01 3-039-314-11 3-039-314-21 3-039-315-01 3-039-315-11 3-039-315-21 A-3328-831-A 3-040-819-02 3-041-117-01 3-831-441-11 3-042-520-01 Description LEVER (CD) (BLUE) KEY 2 BOARD KEY 3 BOARD KEY 1 BOARD COVER (L) (SILVER) COVER (L) (GREEN) COVER (L) (BLUE) COVER (R) (SILVER) COVER (R) (GREEN) COVER (R) (BLUE) LED BOARD, COMPLETE PLATE (LCD), SHIELD SHEET (LCD) CUSHION (A) CUSHION (C) Remark
3-039-326-02 TERMINAL, ANTENNA 3-041-268-01 LEVER (CD) (SILVER) 3-041-268-11 LEVER (CD) (GREEN)

170 8-719-038-29 DIODE SLP-181B-51 ANT1 1-501-820-11 ANTENNA, TELESCOPIC (FM) LCD501 1-803-763-11 DISPLAY PANEL, LIQUID CRYSTAL
TAPE MECHANISM DECK SECTION-1 (MF-Z500-117)

HRP301

209 220

213 214

217 215

216 201

Ref. No. 209 * 210 * 211
Part No. 3-933-010-01 3-933-025-01 3-040-857-01 3-933-024-01 3-933-019-01 3-933-028-01 3-933-016-01 3-008-590-01 3-008-592-01 3-008-588-01
Description SPRING (S/P), TORSION SPRING (P), TORSION LEVER (P) ROLLER, PINCH SPRING (F/R), TORSION SPRING (FWD), TORSION GEAR (S REEL) SLIDER (REC) BASE (H), HEAD SLIDER (REW)
Ref. No. * 212 * * 215 * * 220 HE301
Part No. 3-008-587-01 3-008-591-01 3-933-004-01 3-933-021-01 3-933-006-01 3-934-833-01 3-022-794-02 3-933-007-01 3-012-114-01 1-543-876-11
Description SLIDER (STOP) SLIDER (PAUSE) CLAW, REEL SLIDER (FRP) SLIDER (EJECT) SPRING (FRP) SPRING (BT) PLATE, LOCK LEVER (FR) HEAD (ERASE)

3-008-589-13 SLIDER (FF)

HRP301 1-500-454-11 HEAD, MAGNETIC (RECORD/PLAYBACK)
TAPE MECHANISM DECK SECTION-2 (MF-Z500-117)

254 255

269 261

263 267

Ref. No. 255 * 262
Part No. 3-933-029-01 3-933-182-01 3-932-995-01 X-3371-667-1 3-932-997-01 3-932-999-01 3-932-998-01 3-009-648-01 3-936-438-01 X-3373-572-1
Description LEVER, ERASING PREVENTION SPRING, CASSETTE GEAR (MID) CLUTCH ASSY GEAR (CAM) SLIDER (SW) SPRING (GROUND), TORSION LEVER (S. OFF) LEVER (K) REEL ASSY (N), T
Ref. No. 272 M301 S303 S304
Part No. 3-932-993-24 3-343-358-01 3-933-005-01 3-016-349-01 3-937-760-01 3-934-336-01 3-939-383-02 3-009-650-02 3-023-780-01 A-3320-446-A
Description CHASSIS, OUTSERT RING, RETAINING SPRING (CAM), COMPRESSION WASHER SPRING (GROUND), COMPRESSION
BEARING SPRING, COMPRESSION SPRING (K), COMPRESSION SPRING MOTOR ASSY (WITH PULLY) (CAPSTAN/REEL)
3-933-020-01 BELT X-3372-924-1 FLYWHEEL ASSY
1-762-679-11 SWITCH, LEAF (MOTOR ON/OFF) 1-771-059-11 SWITCH, LEAF (TAPE PLAY)
OPTICAL PICK-UP SECTION (KSM-213CDM)

302 304

303 306
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

Ref. No. 304

Part No. 8-848-483-06 2-627-003-02 2-626-908-01 3-713-786-51

Description OPTICAL PICK-UP KSS-213C GEAR (B) (RP) SHAFT, SLED SCREW +P 2X3

Ref. No. M702

Part No.
2-626-907-01 GEAR (A) X-2626-202-1 CHASSIS ASSY (MB) (RP), MOTOR (SPINDLE) (INCLUDING M701) X-2625-769-1 GEAR ASSY (MB), MOTOR (SLED)
SECTION 8 ELECTRICAL PARTS LIST
NOTE: Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. -XX and -X mean standardized parts, so they may have some difference from the original one. RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable Abbreviation CET : East European model Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. SEMICONDUCTORS In each case, u: , for example: uA. : A. uPA. : PA. uPB. : PB. uPC. : PC. uPD. : PD. CAPACITORS uF: F COILS uH: H

BATT (+) BATT () CD

The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. When indicating parts by reference number, please include the board.

Ref. No. *

Ref. No. C733 C734 C735 C737 C741 C743 C744 C745 C747 C748 C749 C750 C751 C753 C755 C756 C759 C760 C761 C762 C763 C764 C765 C766 C767 C768 C769 C770 C771 C772 C773 C774 C775 C776 C777 C778 C780 C781 C782 C783 C784 C785 C786 C787
Part No. 1-162-306-11 1-128-805-21 1-162-282-31 1-162-306-11 1-127-878-21 1-104-664-11 1-124-472-11 1-104-665-11 1-162-282-31 1-104-665-11 1-162-282-31 1-162-306-11 1-162-306-11 1-104-665-11 1-127-888-21 1-162-306-11 1-104-665-11 1-136-173-00 1-162-199-31 1-104-665-11 1-162-290-31 1-162-199-31 1-162-286-21 1-104-665-11 1-162-294-31 1-162-306-11 1-136-169-00 1-162-282-31 1-162-282-31 1-162-306-11 1-104-665-11 1-161-494-00 1-162-306-11 1-162-306-11 1-162-306-11 1-162-306-11 1-162-284-31 1-162-292-31 1-126-963-11 1-162-282-31 1-162-290-31 1-162-282-31 1-162-282-31 1-162-294-31
Description CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC ELECT ELECT ELECT CERAMIC ELECT CERAMIC CERAMIC CERAMIC ELECT CERAMIC CERAMIC ELECT MYLAR CERAMIC ELECT CERAMIC CERAMIC CERAMIC ELECT CERAMIC CERAMIC MYLAR CERAMIC CERAMIC CERAMIC ELECT CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC ELECT CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC 0.01uF 47PF 100PF 0.01uF 0.015uF 47uF 470uF 100uF 100PF 100uF 100PF 0.01uF 0.01uF 100uF 0.1uF 0.01uF 100uF 0.47uF 10PF 100uF 470PF 10PF 220PF 100uF 0.001uF 0.01uF 0.22uF 100PF 100PF 0.01uF 100uF 0.022uF 0.01uF 0.01uF 0.01uF 0.01uF 150PF 680PF 4.7uF 100PF 470PF 100PF 100PF 1000PF 20% 5% 10% 20% 10% 20% 20% 20% 10% 20% 10% 20% 20% 20% 10% 20% 20% 5% 5% 20% 10% 5% 10% 20% 10% 20% 5% 10% 10% 20% 20% 20% 20% 20% 20% 10% 10% 20% 10% 10% 10% 10% 10%

upper cabinet section

1 two connectors (CNP306, 312)
TYPE A 1 connector (CNP311)
1 two screws (BVTP3 10) 5 CD board 1 two screws (BVTP3 10)
4 wire, parallel (FFC) (16 core) (CNP701)
CONNECTOR SETTING (TYPE B, C)
Note: When connecting speaker lead, set it as shown in the figure.
POWER board bracket (SP) (TYPE B) bracket (SP) (TYPE C) BH354 BH351

speaker lead

CNP307 CNP308 CNP352 BH353
CD board CNP704 MAIN board
8 boss 7 spring (cassette)
3 two screws (BVTP3 10) 4 speaker (R ch)
9 cassette lid assy and holder, cassette

6 damper

5 screw (BVTP3 10) 1 two screws (BVTP3 10) 2 bracket (SP) (TYPE A, B)

2 bracket (SP) (TYPE C)

REC SW board
1 Push the button (ST/EJ).
4 tape mechanism deck section
4-1. CHANGE THE ROUTING OF SPEAKER LEAD WIRES (TYPE B) AND CORRECTION (TYPE A, B) Change the Routing of Speaker Lead Wires (Type B)
! : Indicates changed portion.

Type A

Type B

32, 34

41, 42

Correction (Type A, B)

! : Indicates added portion.

INCORRECT CORRECT

(Page 32) (Page 32)

Location: H-11

4-2. PRINTED WIRING BOARDS CD Section (TYPE C)
Ref. No. IC701 IC702 IC703 Q701 Q701 Q703 Location C-6 E-5 B-5 D-5 A-6 A-6

(Page 19)

(Page 20)

(Page 29)

12 1-675-298(12)
4-3. SCHEMATIC DIAGRAM CD Section (TYPE C)

(Page 19) (Page 27)

(Page 26)
Ref. No. D1 D2 D3 D10 D11 D321 D322 D351 D352 D353 D361 D362 D363 D366 D367 D901 D902 D903 D904 D905 D906 D907 D908 D909 D910 D911 D912 IC1 IC2 IC301 IC302 IC303 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q301 Q302 Q303 Q311 Q312 Q313 Q351 Q352 Q353 Q354 Q361 Q362 Q363 Q364 Q365 Q366 Q367 Q368 Q369 Q370 Q371 Q372 Q373 Q374 Q375 Location F-6 F-6 E-8 G-7 G-7 C-2 C-2 C-13 D-13 C-13 F-3 F-2 E-3 E-3 D-3 E-14 E-14 D-14 D-14 D-12 D-12 D-12 D-13 D-12 C-12 C-12 C-12 F-5 E-5 C-6 C-4 C-14 F-5 F-5 E-4 G-8 E-8 F-7 E-7 E-6 E-6 B-3 D-3 B-3 B-9 B-9 B-10 C-12 C-12 C-13 C-13 F-3 F-3 D-7 F-3 F-3 F-3 G-2 G-2 G-3 G-3 G-3 G-3 D-5 E-3 F-3
PRINTED WIRING BOARDS MAIN/POWER SUPPLY Section (TYPE C)

(Page 29) (Page 14)

(Page 13)

(Page 30)

SCHEMATIC DIAGRAM MAIN Section (TUNER) (TYPE C)
SCHEMATIC DIAGRAM MAIN (AUDIO) /POWER SUPPLY Section (TYPE C)
IC Block Diagram IC303 BA5417

T.S.D. + +

STANDBY BS 1

OUT2 VCC OUT1

TYPE A, B TYPE C

Ref. No. Part No. 171

Ref. No. Part No. 65

3-043-001-01 CUSHION (U) plied
3-040-820-01 PLATE SHIELD (TUNE)
3-040-820-01 PLATE (TUNE), SHIELD

109 105

1-675-541-11 BATT (+) BOARD ************* 1-675-542-11 BATT () BOARD ************* 1-675-537-11 KEY 1 BOARD *********** 1-675-538-11 KEY 2 BOARD *********** 1-675-539-11 KEY 3 BOARD *********** A-3322-188-A LCD BOARD, COMPLETE ********************
1-677-328-11 BATT (+) BOARD ************* 1-677-329-11 BATT () BOARD ************* 1-677-323-11 KEY 1 BOARD *********** 1-677-324-11 KEY 2 BOARD *********** 1-677-325-11 KEY 3 BOARD ***********

To next Page

105 105
Page Before Change After Change

CHANGE

Remark Ref. No. Part No.
Ref. No. Part No. * 105 Description Remark Ref. No. Part No. * 105 Description Remark * * 3-039-321-02 BRACKET (SP) 3-039-321-01 BRACKET (SP) (TYPE A, B)
3-046-795-01 BRACKET (SP) (TYPE C)

0.01uF

Ref. No. Part No. 170 Description Description Remark 8-719-038-29 DIODE SLP-181B-51 To next Page

Ref. No. Part No. * 4

PRINTED WIRING BOARDS MODIFICATION
Description Remark Ref. No. Part No. * 4
A-3323-290-A MAIN BOARD, COMPLETE ********************* CNP310 1-564-778-11 PLUG, CONNECTOR (2.5mm) 4P CNP311 1-564-778-11 PLUG, CONNECTOR (2.5mm) 4P
1-675-542-11 BATT () BOARD
1-677-329-11 BATT () BOARD
* 8 1-675-541-11 BATT (+) BOARD * 8
1-677-328-11 BATT (+) BOARD
A-3322-179-A POWER BOARD, COMPLETE *********************** CNP352 1-564-778-11 PLUG, CONNECTOR (2.5mm) 4P
* 1-675-540-11 REC SW BOARD ************* *
* 107 1-675-540-11 REC SW BOARD * 107 1-677-327-11 REC SW BOARD
1-677-327-11 REC SW BOARD *************
* 160 1-675-538-11 KEY 2 BOARD * 160

1-677-324-11 KEY 2 BOARD

Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
1-675-539-11 KEY 3 BOARD * 161 1-677-325-11 KEY 3 BOARD 1-675-537-11 KEY 1 BOARD * 162 1-677-323-11 KEY 1 BOARD

BATT (+)

6-3. ELECTRICAL PARTS LIST (TYPE C)
Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. SEMICONDUCTORS In each case, u: , for example: uA. : A. uPA. : PA. uPB. : PB. uPC. : PC. uPD. : PD. CAPACITORS uF: F COILS uH: H NOTE: Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. -XX and -X mean standardized parts, so they may have some difference from the original one. RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable

X701 1-577-253-11 VIBRATOR, CERAMIC (16.9344MHz) ************************************************************** * 1-639-678-12 CD MOTOR BOARD **************** < CONNECTOR > CNP707 1-564-722-11 PIN, CONNECTOR (SMALL TYPE) 6P < SWITCH > S701 1-572-085-11 SWITCH, LEAF (LIMIT) ************************************************************** * 1-677-323-11 KEY 1 BOARD *********** < CAPACITOR > C602 1-162-306-11 CERAMIC 0.01uF 20% 16V

1-247-885-00 CARBON

Ref. No. Part No. Description < LED > D602 8-719-038-29 LED SLP-181B-51 (ALARM) Remark Ref. No. * Part No.
1-677-325-11 KEY 3 BOARD *********** < RESISTOR >
< RESISTOR > R601 R602 R603 R604 R605 R610 R611 R624 R625 1-249-427-11 1-249-428-11 1-249-430-11 1-249-432-11 1-249-435-11 1-249-430-11 1-249-432-11 1-249-413-11 1-249-408-11 CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON CARBON < SWITCH > S601 S602 S603 S604 S605 1-762-798-11 1-762-798-11 1-762-798-11 1-762-798-11 1-762-798-11 SWITCH, KEYBOARD (ALARM) SWITCH, KEYBOARD (TIMER) SWITCH, KEYBOARD (SLEEP) SWITCH, KEYBOARD (DISPLAY, MEM ENT) SWITCH, KEYBOARD (PLAY MODE, MONO/ST ISS) 6.8K 8.2K 12K 18K 33K 12K 18K 5% 5% 5% 5% 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W 1/4W R617 R618 R619 R620 R621 1-249-430-11 1-249-432-11 1-249-435-11 1-249-439-11 1-247-885-00 CARBON CARBON CARBON CARBON CARBON < SWITCH > S619 S620 S621 S622 S623 1-762-798-11 1-762-798-11 1-762-798-11 1-762-798-11 1-762-798-11 SWITCH, KEYBOARD (BAND) SWITCH, KEYBOARD (VOL +) SWITCH, KEYBOARD (VOL ) SWITCH, KEYBOARD (PRESET ) SWITCH, KEYBOARD (PRESET +) 12K 18K 33K 68K 180K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W
S624 1-762-798-11 SWITCH, KEYBOARD (AUTO PRESET) ************************************************************** * A-3322-188-A LCD BOARD, COMPLETE ******************** 3-039-322-01 BRACKET (LCD) < CAPACITOR > C501 C502 C503 C504 C505 C506 C507 C508 C509 C510 C511 C512 C513 C514 C515 C516 C517 C518 C520 C521 C522 C523 C524 C525 C526 C527 C528 C529 C530 C531 C532 C533 C534 C535 1-127-888-21 1-162-306-11 1-124-584-00 1-126-157-11 1-127-888-21 1-128-803-21 1-128-802-21 1-162-306-11 1-162-306-11 1-162-306-11 1-162-306-11 1-128-802-21 1-128-803-21 1-128-802-21 1-128-803-21 1-162-306-11 1-162-306-11 1-162-282-31 1-162-282-31 1-162-282-31 1-162-290-31 1-162-282-31 1-162-282-31 1-162-282-31 1-162-282-31 1-162-282-31 1-162-282-31 1-162-282-31 1-162-282-31 1-162-282-31 1-162-282-31 1-162-282-31 1-162-306-11 1-162-282-31 CERAMIC CERAMIC ELECT ELECT CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC 0.1uF 0.01uF 100uF 10uF 0.1uF 33PF 27PF 0.01uF 0.01uF 0.01uF 0.01uF 27PF 33PF 27PF 33PF 0.01uF 0.01uF 100PF 100PF 100PF 470PF 100PF 100PF 100PF 100PF 100PF 100PF 100PF 100PF 100PF 100PF 100PF 0.01uF 100PF 10% 20% 20% 20% 10% 5% 5% 20% 20% 20% 20% 5% 5% 5% 5% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 10% 50V 16V 10V 16V 50V 50V 50V 16V 16V 16V 16V 50V 50V 50V 50V 16V 16V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 16V 50V