2-655-834-13(1)

NOTICE FOR CUSTOMERS IN THE U.S.A.

CAUTION

You are cautioned that any changes or modications not expressly approved in this manual could void your authority to operate this equipment.

CD Radio Cassette-Corder

Operating Instructions

Owners Record

The model number is located at the bottom and the serial number is located in the battery compartment. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. CFD-S01 Serial No. ______________
Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.
NOTICE FOR CUSTOMERS IN CANADA CAUTION US
The use of optical instruments with this product will increase eye hazard.

For customers in the USA

This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Please register this product on line at http://www.sony.com/productregistration. Proper registration will enable us to send you periodic mailings about new product, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modication. Thank you.

CFD-S01

2005 Sony Corporation

Printed in China

WARNING
To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
To reduce the risk of re, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus. To reduce the risk of re or electric shock, do not place objects lled with liquids, such as vases, on the apparatus. Connect the apparatus to an easily accessible AC outlet. Should you notice an abnormality in the apparatus, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a conned space, such as a bookcase or built-in cabinet.

Notes on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Music discs encoded with copyright protection technologies
This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

Power sources

Specications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 4-ohm loads, both channels driven from 150 - 10,000 Hz; rated 1 W per channel-minimum RMS power, with no more than 10 % total harmonic distortion in AC operation. Battery life For CD radio cassette-corder:

FM recording

Sony R14P: approx. 6 h Sony alkaline LR14: approx. 20 h

Other specications

CD player section
System Compact disc digital audio system Laser diode properties Emission duration: Continuous Laser output: Less than 44.6 W (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Number of channels 2 Frequency response 20 - Hz +1/2 dB Wow and utter Below measurable limit

Tape playback

Sony R14P: approx. 3 h Sony alkaline LR14: approx. 12 h

CD playback

Sony R14P: approx. 1.5 h Sony alkaline LR14: approx. 7 h Dimensions Approx. 235 mm (w/h/d) (14 1/5/3/8 inches) (incl. projecting parts) Mass Approx. 2.6 kg (5 lb. 11 oz) (incl. batteries) Supplied accessory AC power cord (1) Design and specications are subject to change without notice.
1 to AC IN 2 to a wall outlet
Connect the AC power cord or insert six R14 (size C) batteries (not supplied) into the battery compartment.
Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. Replace all the batteries with new ones. Before you replace the batteires, be sure to take out the CD from the player. To use the player on batteries, disconnect the AC power cord from the player.

Radio section

Frequency range FM: 87.5 - 108 MHz AM: Taiwanese model: 531 - kHz Other models: 530 - kHz Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna

Optional accessory

Sony MDR headphones series

Before using the unit

To turn on/off the power

Press POWER.

Falling asleep to music
1 Play the music source you want. 2 Press SLEEP to display SLEEP. 3 Press SLEEP to select the minutes until the

Cassette-corder section

Recording system 4-track 2 channel stereo Fast winding time Approx. 150 s (sec.) with Sony cassette C-60 Frequency response TYPE I (normal): 80 - Hz

General

To adjust the volume

Press VOLUME +, .

To listen through headphones To reinforce the bass sound
Connect the headphones to the (headphones) jack. Press MEGA BASS. MEGA BASS appears in the display. To return to normal sound, press the button again.
player goes off automatically. Each time you press the button, the indication changes as follows: 120 OFF 30.
To cancel the sleep function
Press POWER to turn off the power.
When you are playing a tape using this function: If the tape length of one side is longer than the set time, the player will not go off until the tape reaches the end.
Speaker Full range: 8 cm (3 1/4 inches) dia., 4 , cone type (2) Outputs Headphones jack (stereo minijack): For 16 - 32 impedance headphones Power output 1.7 W + 1.7 W (at 4 , 10% harmonic distortion) Power requirements For CD radio cassette-corder: 120 V AC, 60 Hz 9 V DC, 6 R14 (size C) batteries Power consumption AC 13 W

Basic Operations

To Select Program play Select PGM Then do this Press or then press DISPLAYENTER for the tracks you want to program in the order you want up to 20 tracks. Then press .

On placement

Do not leave the player in a location near heat sources, in a place subject to direct sunlight, excessive dust or mechanical shock or in a car subject to the direct rays of the sun. Do not place the player on an inclined or unstable place. Do not place anything within 10 mm of the side of the cabinet. The ventilation holes must be unobstructed for the player to operate properly and prolong the life of its components. Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring-wound watches away from the player to prevent possible damage from the magnet.

Playing a tape

1 Press TAPE (direct power-on). 2 Press , and insert the tape into the tape
compartment with the side you want to play facing you. Use TYPE I (normal) tape only. Close the compartment. Make sure there is no slack in the tape to avoid damaging the tape or the unit.

On operation

If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player section. Should this occur, the player will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate. If the player has not been used for a long time, set it in the playback mode to warm it up for a few minutes before inserting a cassette.

Programed track

* VOLUME + , and have a tactile dot.

Playing order

repeat programed tracks

PGM and

Playing a CD
1 Press CD (direct power-on). 2 Press PUSH OPEN/CLOSE and place a disc
with the label side up on the CD compartment. To close the CD compartment, press PUSH OPEN/ CLOSE.
Press or then press DISPLAYENTER for the tracks you want to program in the order you want up to 20 tracks. Then Press .

Notes on cassettes

Break off the cassette tab from side A or B to prevent accidental recording. If you want to reuse the tape for recording, cover the broken tab with adhesive tape.

Side A

To cancel selected play mode

3 Press .

The player starts playing.
To Press . To resume play, press it again.
. or (fast forward or rewind).

Cleaning the cabinet

Press MODE repeatedly until the selected mode disappears from the display.
Tab for side A Tab for side B
The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback. Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. If you have any questions or problems concerning your player, please consult your nearest Sony dealer.
To check the programed track and playing order in the display
To check the order of tracks before play, press DISPLAYENTER. Every time you press the button, the track number appears in the programed order.
Pause playback Stop playback Fast-forward or rewind*

Eject the cassette .

* When the tape is wound to the end, press to release or .
To change the current program
The player plays all the tracks once.

Track number

Press once if the CD is stopped and twice if the CD is playing. The current program will be erased. Then create a new program following the programing procedure.
You can play the same program again, since the program is saved until you open the CD compartment. You can record your own program. After youve created the program, insert a blank tape and press to start recording.

Troubleshooting

The power is not on.
Connect the AC power cord to the wall outlet securely. Make sure the batteries are inserted correctly. Replace all the batteries with new ones if they are weak.

Recording on a tape

1 Press to open the tape compartment
and insert a blank tape with the side you want to record on facing you. Use TYPE I (normal) tape only. Close the compartment. To record from the CD player, place a CD and press CD. To record from the radio, tune in the station you want.

Playing time

Press . To resume play, press it again. .
. . (forward) or (backward) while playing and hold it until
2 Select the program source you want to record.

There is no audio.

Unplug the headphones when listening through speakers.
Pause playback Stop playback Go to the next track Go back to the previous track Locate a point while listening to the sound Locate a point while observing the display Remove the CD

Listening to the radio

1 Press RADIO BANDAUTO PRESET
repeatedly (direct power-on). Each time you press the button, the indication changes as follows: FM AM digits begin to change in the display. The player automatically scans the radio frequencies and stops when it nds a clear station. If you cant tune in a station, press the button repeatedly to change the frequency step by step. When an FM stereo broadcast is received, ST appears.

Noise is heard.

Someone is using a portable telephone or other equipment that emits radio waves near the player. Move the portable telephone, etc., away from the player.
3 Press to start recording
( is depressed automatically).
To Press . To resume recording, press it again. .

CD player

The CD does not play or no dISC is displayed even when a CD is in place.
Place the CD with the label surface up. Clean the CD. Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. The CD-R/CD-RW is blank. There is a problem with the quality of the CD-R/CD-RW, recording device or application software. Replace all the batteries with new ones if they are weak.
2 Hold down TUNE + or until the frequency
Pause recording Stop recording
you nd the point. (forward) or (backward) in pause and hold it until you nd the point. PUSH OPEN/CLOSE

Using the display

To check the total track number and playing time
Press DISPLAYENTER in stop mode.
If the FM broadcast is noisy, press MODE until Mono appears in the display and radio will play in monaural.
Adjusting the volume or the audio emphasis will not affect the recording level. For the best results, use wall outlet as a power source for recording. To erase a recording, proceed as follows: 1 Insert the tape whose recording you want to erase. 2 Press TAPE. 3 Press .

The sound drops out.

Reduce the volume. Clean the CD, or replace it if the CD is badly damaged. Place the player in a location free from vibration. Clean the lens with a commercially available blower. The sound may drop out or noise may be heard when using poor quality CD-Rs/CD-RWs or if there is a problem with the recording device or application software.
Presetting radio stations
You can store radio stations into the players memory. You can preset up to 30 radio stations, 20 for FM and 10 for AM in any order.

Precautions

Discs that this unit CAN play
Audio CD CD-R/CD-RW (CD-DA*) * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs.

Reception is poor.

Reorient the antenna to improve FM reception.
To check the remaining time
Press DISPLAYENTER repeatedly while playing a CD. The display changes as follows:
1 Press RADIO BANDAUTO PRESET to

select the band.

The current track number and playing time The current track number and the remaining time of the current track* The number of tracks left and remaining time on the CD
2 Hold down RADIO BANDAUTO PRESET for
2 seconds until AUTO ashes in the display. The stations are stored in memory from the lower frequencies to the higher ones.
Discs that this unit CANNOT play
CD-R/CD-RW other than those recorded in music CD format CD-R/CD-RW of poor recording quality, CD-R/CD-RW that has scratches or are dirty, or CD-R/CD-RW recorded with an incompatible recording device CD-R/CD-RW which is nalized incorrectly

Press DISPLAYENTER.

* For a track whose number is more than 20, the remaining time appears as - -:- - in the display.
If a station cannot be preset automatically
You need to preset a station with a weak signal manually.

Notes on discs

Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. If there is a scratch, dirt or ngerprints on the CD, it may cause tracking error.
Reorient the player itself to improve AM reception.
The audio is weak or has poor quality.
Replace all the batteries with new ones if they are weak. Move the player away from the TV.

Selecting the play mode

Press MODE until 1, , SHUF, SHUF and , PGM, or PGM and appear in the display. Then proceed as follows:
To Select Repeat a single track Select 1 Then do this Press or to select the track that you want to repeat, then press . Press .
2 Tune in a station you want. 3 Hold down DISPLAYENTER for 2 seconds
until the preset number ashes in the display.
The picture of your TV becomes unstable.
Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. Do not stick paper or sticker on the CD, nor scratch the surface of the CD. After playing, store the CD in its case. If you are listening to an FM program near the TV with an indoor antenna, move the player away from the TV.
4 Press PRESET + or until the preset number
you want for the station ashes in the display. The new station replaces the old one.
The preset radio stations remain in memory even if you unplug the AC power cord or remove the batteries.

Tape player

The tape does not move when you press an operation button.
Close the cassette compartment securely.

5 Press DISPLAYENTER.

Repeat all tracks Repeat tracks in random order

On safety

As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualied personnel only. Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualied personnel before operating it any further. Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this player. Attempting to do so may damage the player. Do not use such discs.
The button does not function or the tape does not play or record.
Make sure the safety tab on the cassette is in place.

Shufe play SHUF SHUF and

Press . Press .
Poor or distorted playback, recording or erasing quality.

Clean the heads by using dry- or wet-type cleaning cassette (available separately) after every 10 hours of use, before you start an important recording, or after playing an old tape. Failure to clean the tape heads can cause degraded sound quality or an inability of the unit to record or play tapes. For details, refer to the instructions of the cleaning cassette. The TYPE II (high position) or TYPE IV (metal) tape is being used. Use TYPE I (normal) tape only. Demagnetize the heads using a commercially available tape head demagnetizer. Replace all the batteries with new ones if they are weak. After trying the remedies, if you still have problems, unplug the AC power cord or remove all the batteries. After all the indications in the display disappear, plug the AC power cord or insert the batteries again. If the problem persists, please consult your nearest Sony dealer.
Playing preset radio stations
select the band. station.
2 Press PRESET + or to tune in the stored

On power sources

For AC operation, use the supplied AC power cord; do not use any other type. The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off. Unplug the player from the wall outlet when it is not be used for an extended period of time. When the batteries are not to be used, remove them to avoid damage that can be caused by battery leakage or corrosion. The nameplate indicating operating voltage, power consumption, etc. is located at the bottom.

LASYSTEMS - Brusselsesteenweg 208 - 1730 Asse - Belgium
Phone: +32-2-4531312 - Fax: +32-2-4531763 E-mail: info@lasystems.be
Sony CD Radio Cassette player CFD-S01 (CFD-S01)
CFD-S01 - Compact, stylish digital CD Radio Cassette player

Price details:

Price excl. VAT: 52.57 Eco fees: 0.00 VAT 21 %: 11.04
PDF generated on: 6 June, 2011

Product details:

Product code: CFD-S01 EAN: 4905524304022 Manufacturer: Sony

63.61

* VAT included -Digital FM / AM Tuner with 20/10 presets. -Mega Bass for superb bass sound. -CD-R / RW Playback Compatible. Main specifications:
Product is discontinued. You can not order it anymore.
FM band: AM band: 87.5 - 108 MHz 531 - 1611 kHz Y Y Personal N Y 230 V x 235 x 141 mm 2800 g 80 mm

Media types

CD-R playback: CD-RW playback:

Technical details

Device type: MP3 playback:

Management features

Sleep timer:

Energy management

Power requirements: Number of batteries supported:

Weight & dimensions

Dimensions W x D x H: Weight:

Loudspeakers

Loudspeaker diameter:
*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. Lasystems makes no warranty expressed or implied with respect to accuracy of the information, including price, editorials or specifications. Lasystems or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if Lasystems has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification.