Sony CMT-M100MD Manual
Sony CMT-M100MD, size: 472 KB
Here you can find all about Sony CMT-M100MD like manual and other informations. For example: user manual.
Sony CMT-M100MD manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Sony CMT-M100MD please write about it to help other people. [ Report abuse or wrong photo | Share your Sony CMT-M100MD photo ]
User reviews and opinions
|RevChris||12:14pm on Friday, June 25th, 2010|
|Excellent quality - sturdy design I wanted a small, good quality sound system to fit on a work surface in our kitchen. EXCELLENT this stereo is a masterpiece! everything about it is great. for a small 15w speaker, it sure can pack a punch.|
|skwilliamson||12:21pm on Sunday, June 20th, 2010|
|This Hi-Fi is the best I know for what it does. It listens to the radio, with a digital tuner, preset stations and ease of use on both AM & FM.|
|jsutherl||5:29pm on Sunday, June 6th, 2010|
|Excellent quality - sturdy design I wanted a small, good quality sound system to fit on a work surface in our kitchen.|
|zdux0012||6:07am on Thursday, April 15th, 2010|
|Excellent quality - sturdy design I wanted a small, good quality sound system to fit on a work surface in our kitchen.|
|johnrobot||4:57pm on Tuesday, April 13th, 2010|
|You would expect from a Sony product. I have had it quite a while and have encountered no problems at all.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
?/1 (power) 1 (8, 20, 30, 43, 44, 50, 52) Z PUSH OPEN/CLOSE 7 (46) m/M 8 (10, 16, 37, 39, 43, 44, 46) l/L 8 (10, 11, 13, 1618, 26, 31, 3338, 40, 41, 43) x 8 (10, 16, 21, 2325, 29, 4648) Z MD 9 (15, 16, 20, 30) Z CD qa (9, 10) z MD qd (21, 25, 28, 40) z TAPE qd (48) X TAPE qf (46, 48)
qh qg qf
wl 3 4
qj qk ql w;
5 qd qs qa wk 8 wj wh wg
wa ws wd wf
BASS/TRE 8 (49) CD NX wd (9, 11) CLEAR wa (11, 13, 17, 31, 45) CLOCK/TIMER SELECT qg (50, 52) CLOCK/TIMER SET 2 (8, 50, 51) CURSOR T/t 5 (8, 13, 31) DISPLAY ws (8, 11, 12, 17, 19, 21, 45) DSG 9 (49) ENTER/YES 4 (8, 11, 14, 17, 25, 26, 30, 3335, 37, 38, 40, 41, 43, 45, 50, 51) FM MODE qj (44) FUNCTION qs (9, 11, 13, 15, 17, 18, 21, 25, 26, 3139, 41, 46, 48, 53) GROUP wl (18, 20, 22, 3234)
GROUP SKIP qk (18, 22, 32, 34) MD z 0 (21, 25, 28) MD NX wj (15, 17, 18, 21, 25) MENU/NO qf (14, 26, 30, 3235, 3741, 43) NAME EDIT/SELECT 3 (13, 30, 32, 45) Number buttons w; (10, 13, 16, 31, 44) PLAY MODE wg (9, 11, 13, 15, 17, 30) REPEAT wh (10, 16) SCROLL wk (14, 19, 32, 33) SLEEP qh (49) TAPE nN 7 (4648) TUNER BAND 6 (43, 44) TUNING MODE ql (43, 44) VOL +/ wf
@/1 (power) 1 (8, 20, 30, 43, 44, 50, 52) m/M 5 (10, 16, 37, 39, 43, 44, 46) x qa (10, 16, 21, 2325, 29, 4648)./> qd (8, 10, 11, 13, 1618, 26, 31, 3338, 40, 41, 43, 4951) /+ qd (44)
Hooking up the system
Perform the following procedure 1 to 3 to hook up your system using the supplied cords and accessories.
AM loop aerial
1 Connect the speakers.
Connect the speaker cords to the SPEAKER terminals on the system as the following.
Inserting two R6 (size AA) batteries into the remote
Left speaker cord
Right speaker cord
2 Connect the FM/AM aerials.
When the remote no longer operates the system, replace both batteries with new ones.
Set up the AM loop aerial, then connect it.
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
Extend the FM lead aerial horizontally
3 Connect the mains lead to the mains.
The demonstration appears in the display. If the plug of the mains lead does not fit your mains, detach the supplied plug adaptor. To turn on the system, press ?/1.
The tracks on the CD in original order. All tracks on the CD in random order.
PGM The tracks on the CD in the (Programme Play) order you want them to be played (see Programming CD tracks on page 11).
3 Press CD NX.
Playing a CD (continued)
To enter track number 10 or higher on the remote
To Do this
1 Press >10. 2 Enter the corresponding number buttons.
To enter 0, press 10/0.
Stop play Pause Select a track
Press x. Press CD NX. Press again to resume play. Press l or L (or. or > on the remote) repeatedly until you find the desired track. Keep pressing m or M during play and release it at the desired point. Press REPEAT repeatedly during play until REP or REP1 appears. REP: For all the tracks on the CD up to five times. REP1: For a single track only. To cancel playing repeatedly, press REPEAT repeatedly until both REP and REP1 disappear. Press Z CD.
To enter track number 30, press >10, then 3 and 10/0.
Find a point in a track Play repeatedly (Repeat Play)
Remove the CD
You can start playing from the desired track in Normal Play or Programme Play. Press l or L (or. or > on the remote) repeatedly until the desired track number appears after step 2. Or, press number buttons on the remote. Play automatically starts.
Programming CD tracks
You can make a programme of up to 25 tracks.
5 To programme additional tracks, repeat
steps 3 and 4.
6 Press CD NX.
1 Press FUNCTION repeatedly to switch
PLAY MODE on the remote) in stop mode repeatedly until PGM appears.
Check the Press l or L (or. or programme order > on the remote) repeatedly during Programme Play. Check the total number of programmed tracks Press DISPLAY on the remote in stop mode. The total number of programmed steps appears, followed by the last programmed track number and the total playing time of the programme.
3 Press l or L (or. or > on
the remote) repeatedly until the desired track number appears.
Selected track number Playing time of the selected track
Cancel Press PLAY MODE/DIRECTION Programme Play (or PLAY MODE on the remote) in stop mode repeatedly until both PGM and SHUF disappear. Add a track to the end of the programme in stop mode Perform steps 3 and 4.
The new group is added after any existing groups with tracks registered into them. Up to 99 groups can be registered on a single MD. If Group Full! appears during recording, track numbers are not marked.
Recording tracks in groups (continued)
Recording a CD on an MD
CD-MD Synchro Recording
Recording into an existing group
You can add tracks to an existing group.
1 Follow the same procedures as from
step 1 to 3 of Recording into a new group on page 21.
1 Load a recordable MD. 2 Load a CD you want to record.
Proceed to step 4 to record not using the Group Function.
2 Press z MD (or MD z on the remote).
New Track flashes and the MD deck stands by for recording.
3 To record using the Group Function,
press GROUP on the remote repeatedly until the GROUP indicator lights up.
4 Press SYNCHRO MODE repeatedly until
CD-MD SYNC appears.
5 Press ENTER/START.
Press START flashes. The MD deck stands by for recording and the CD player pauses for play. Proceed to step 7 to record not using the Group Function.
4 Press MD NX, then start playing the
desired source to record. If Group Full! appears when you press z MD (or MD z on the remote) in step 2
6 To record using the Group Function,
perform the following procedure depending on where you want to record: To record into a new group
Proceed to step 7.
To record into an existing group
The recorded track is added to the end of the group. When you newly record a track into an existing group, the track numbers following the newly recorded track may change when the Group Function is turned off. If Group Full! appears during recording, track numbers are not marked.
Press GROUP SKIP on the remote repeatedly until the desired group appears.
7 Press ENTER/START while Press
Recording starts. When the recording of all selected tracks is completed, the CD player and the MD deck stop automatically.
To stop recording
Recording a CD on an MD with high speed
High-Speed CD-MD Synchro Recording
You can make a digital recording of a CD on an MD at twice the speed of normal CD-MD Synchro Recording.
In step 4 of Recording a CD on an MD, press SYNCHRO MODE repeatedly until HISPEED SYNC appears.
You can record only your favourite CD tracks with Programme Play. After step 2, follow the same procedures as from step 1 to 5 of Programming CD tracks on page 11, then go to step 3. Depending on the disc, CD TEXT information may also be recorded (except when you record on an MD and a tape at the same time). If TEXT flashes during recording, see Labelling an MD on page 30.
You can record just the portions you like from a CD, or start recording from the middle of the tape. You can also record a radio programme.
When you press ENTER/YES on the remote in step 5
End of the source to be recorded Time
6 seconds Recorded portion
Beginning of the source to be recorded
3 Press z MD (or MD z on the remote).
The MD deck stands by for recording.
desired source to record. To stop recording
4 Start playing the desired source to
5 Press ENTER/YES on the remote at the
desired point to start recording. To stop Time Machine Recording
Starting recording with 6 seconds of prestored audio data
Time Machine Recording
When recording from an FM or satellite broadcast, the first few seconds of material are often lost due to the time it takes you to ascertain the contents and press the record button. To prevent the loss of this material, the Time Machine Recording feature constantly stores the most recent audio data in a buffer memory. This lets you record the sound from 6 seconds before starting recording, as shown in the illustration below:
The MD deck starts storing audio data when the deck stands by for recording in step 3 and you start playing the source. If less than 6 seconds have passed when you press ENTER/YES on the remote, Time Machine Recording starts with less than 6 seconds of audio data.
Recording for long times/Marking track numbers/Smart space/ Adjusting the recording level
Recording for long times
This system has two long time recording modes: LP2 and LP4 (MDLP recording). When recording in LP2 Stereo mode, you can record 2 times the normal recordable time, and in LP4 Stereo mode, you can record 4 times the normal recordable time. In addition, the recordable time for monaural recording is approximately double the stereo recording time. LP4 Stereo mode (4 long time recording mode) achieves a long stereo recording time by use of a special compression system. When placing emphasis on sound quality, Stereo recording or LP2 Stereo recording (2 long time recording mode) is recommended.
MDs recorded in MDLP (LP2 or LP4) Stereo mode cannot be played back on a system that does not support MDLP mode. Even if you press REC MODE during recording or recording pause, you cannot change the recording mode. Even if you press REC MODE repeatedly to select MONO, the monitor signal during recording does not become monaural. You cannot use S.F Edit and some other MD edit functions for tracks recorded in MDLP mode.
To add LP: at the beginning of a track title during MDLP recording
LP: appears when you try to play the track on a system that does not support MDLP mode. This convenient function lets you know at a glance that the track cannot be played back. The factory setting is On.
1 Press FUNCTION repeatedly to switch the
function to MD.
2 Press MENU/NO on the remote. 3 Press l or L (or. or > on the
remote) repeatedly until Setup? appears, then press ENTER/YES on the remote.
1 Before recording (CD-MD Synchro
Recording, etc.), press REC MODE repeatedly to select the recording mode.
4 Press l or L (or. or > on the
remote) repeatedly until LP Stamp On or LP Stamp Off appears, then press ENTER/YES on the remote.
Each time you press the button, the display changes cyclically as follows: STEREO REC (Stereo) t LP2 REC (LP2 Stereo) t LP4 REC (LP4 Stereo) t MONO REC (Monaural)
5 Press l or L (or. or > on the
remote) repeatedly to select the setting, then press ENTER/YES on the remote.
2 Press MENU/NO on the remote.
To continue and record, follow the procedures described on the various recording pages.
Add LP: Cancel adding LP:
LP Stamp On (factory setting) LP Stamp Off
6 Press MENU/NO on the remote.
The selected recording mode is kept even after recording has finished, so be sure to check the recording mode before recording.
The recorded LP: is a stamp which appears to indicate that the track cannot be played back when you try to play the track on system that does not support MDLP mode. It does not appear for systems that support MDLP mode. When set to On, LP: is recorded as the track title, so the number of characters that can be input to an MD is reduced. In addition, if you divide an LP: track using the Divide Function, LP: is also added to the latter track.
You cannot mark track numbers automatically if the sound source to be recorded is noisy (e.g., tapes or radio programmes).
Marking track numbers
Automatically during recording
remote) repeatedly until T.Mark Off or T.Mark LSync appears, then press ENTER/YES on the remote.
Track numbers are automatically marked as on the original source during recording from this systems CD player or components connected to DIGITAL OPTICAL IN jack. Use the Level Synchro Recording Function to automatically mark track numbers during recording from this systems tuner or components connected to the ANALOG IN jacks.
At any point during recording
Turn on the Level Synchro Recording Function Turn off the Level Synchro Recording Function
T.Mark LSync (factory setting) T.Mark Off
You can mark track numbers during recording of any source.
Use the Divide Function (see Dividing recorded tracks on page 38).
Marking track numbers automatically during recording Level-Synchro Recording
When you set the Level Synchro Recording Function, L-SYNC lights up.
The Level Synchro Recording Function is factory set to on, so the track numbers are automatically marked. If L-SYNC does not appear during recording, turn on the Level Synchro Recording as follows. Track numbers are automatically marked when the input signal is continuously below a certain level for more than two seconds and then exceeds that level.
Recording tips (continued)
To change the trigger level for Level Synchro Recording
Making a space between tracks 3 seconds long
Smart Space: Lets you make the blank spaces between tracks 3 seconds long automatically while making a digital recording from a CD. For other types of recording, if the Smart Space Function is on and there is no sound input for about 3 seconds or more (but less than 30 seconds) while recording, the MD deck replaces this silence with a blank of about 3 seconds and continues recording.
No sound input for less than 30 seconds Off
Perform the following procedure to change the signal level that triggers Level Synchro Recording.
1 Press MENU/NO on the remote during
recording pause to display Setup?, then press ENTER/YES on the remote.
2 Press l or L (or. or > on the
remote) repeatedly until LS(T) appears, then press ENTER/YES on the remote.
3 Press l or L (or. or > on the
remote) repeatedly to select the level, then press ENTER/YES on the remote.
You can set the level at any value between 72 dB and 0 dB, in 2 dB steps. The factory setting is 50 dB.
On Replaced with a blank of 3 seconds and recording continues
4 Press MENU/NO on the remote.
Marking track numbers at a specific point during recording Track Mark
You can mark track numbers at any time during manual recording, regardless of the type of sound source.
Press z MD (or MD z on the remote) during manual recording at the point you want to add a track mark.
Auto Cut: When the Smart Space Function is on, if there is no sound input for 30 seconds or more, the MD deck replaces this silence with a blank of about 3 seconds and enters recording pause.
When TEXT is lit, the CD TEXT information is automatically recorded.
Manually during recording
You can edit the MD only in normal play mode. You cannot edit the MD in Shuffle or Programme Play mode.
To cancel the last edit (page 40)
When TEXT flashes, press NAME EDIT/ SELECT on the remote, then press ENTER/ YES on the remote to record the title of the current track.
Use Undo Function to cancel the last edit and restore the contents of the MD to the condition before the edit.
To quit while editing
Depending on the disc, the CD TEXT information may not be recorded automatically. The CD TEXT information is not recorded when recording a CD on an MD and a tape at the same time.
TOC or STANDBY starts flashing. The TOC is updated and editing is completed.
MD editing is completed when the MD Table of Contents (TOC) is updated. The TOC is updated when you eject the MD or press ?/1 to turn off the system. Do not pull out the mains lead before updating the TOC or while updating the TOC (while TOC or STANDBY is flashing) to ensure a complete editing.
Use Name Function on this page. You can input a total of approximately 1,700 characters for the disc title, track titles and group titles on a single MD. The following procedure is for entering titles when the Group Function is off. To label a group, see Labelling a group on page 32. However, when labelling an MD recorded using the Group Function, be sure to label the disc with the Group Function on so as not to rewrite the group management information by mistake. For details on the group management information, see page 20.
2 Perform the following procedure
depending on what you want to label: To label a track
Press l or L (or. or > on the remote) repeatedly until the desired track number appears, then press NAME EDIT/ SELECT on the remote.
To label an MD
Press NAME EDIT/SELECT on the remote while the total number of tracks (or groups when the Group Function is on) is displayed. The cursor starts flashing.
of the name. To change a character 1 Press TCURSOR or CURSORt on the remote repeatedly until the character to be changed flashes. 2 Press CLEAR on the remote to erase the character, then repeat steps 3 and 4.
You cannot erase the title of a group that does not have any tracks registered.
Registering recorded tracks into a new group (continued)
Releasing group registrations
These functions allow you to release group registrations simply by specifying the group for which you want to release the registrations. In addition, you can also release the group registrations of all tracks on an MD at once.
To create a group without registering any tracks, press l or L (or. or > on the remote) repeatedly until None appears, then press ENTER/YES on the remote in step 6. Complete! appears. You can also register tracks that were recorded on a system that does not support the Group Function.
You cannot register the same track to multiple groups. If all the tracks on an MD are registered into groups, Assign None appears after step 5 and you cannot register tracks. When creating a group without registering any tracks, you must enter the group title. If you do not enter a group title in step 5, Group ** (group number) appears instead of the group title.
Releasing a single group
Group Release Function
You can release the group registrations of all tracks within the specified group and erase that group. (However, note that the tracks are not erased.)
4 Press MENU/NO on the remote to
the remote) repeatedly until Gp Release? appears, then press ENTER/ YES on the remote.
REL Gp** (selected group number)?? appears.
6 Press ENTER/YES on the remote.
Releasing the registrations of all tracks on an MD
All Release Function
You can release the group registrations of all tracks on an MD at once.
The MD deck lets you erase unwanted tracks quickly and easily. The three options for erasing recordings are: Erasing a single track (Track Erase Function) Erasing all tracks (All Erase Function) Erasing a portion of a track (A-B Erase Function)
Erasing a single track
Track Erase Function
the remote) repeatedly until Gp All REL? appears, then press ENTER/YES on the remote.
All REL?? appears.
5 Press ENTER/YES on the remote.
You can erase a track simply by selecting its track number. When you erase a track, the total number of tracks on the MD decreases by one and all the tracks following the erased one are renumbered. Example: Erasing track 2.
Track number 1 Original A tracks Erase track 2
2 Press MENU/NO on the remote to
the remote) repeatedly until Tr Erase? appears, then press ENTER/ YES on the remote. continued
Erasing recordings (continued)
Erasing a portion of a track
A-B Erase Function
You can specify a portion within a track and erase the portion with ease. You can shift the desired portion by frame*, minute or second intervals.
The station name appears when you tuned the labelled station. To check the preset number and frequency, press DISPLAY on the remote. The preset number and frequency appear, followed by the station name.
To erase the name
Receiving RDS broadcasts
Simply select a station from the FM band.
1 Tune the station. 2 Press NAME EDIT/SELECT on the remote. 3 Press CLEAR on the remote repeatedly to
erase the name.
When you tune in a station that provides RDS services, the station name appears in the display.
To check the RDS information
Each time you press DISPLAY on the remote, the display changes cyclically as follows: Station name* t Frequency t Clock t BASS t TREBLE
* If the RDS broadcast is not properly received, the station name may not appear.
Loading a tape
1 Press Z PUSH OPEN/CLOSE. 2 Insert a tape.
With the side you want to play/ record facing up
Recording a CD on a tape
CD-TAPE Synchro Recording
You can use TYPE I (normal) tape.
1 Load a recordable tape. 2 Load a CD you want to record. 3 Press SYNCHRO MODE repeatedly until
CD-TAPE SYNC appears.
Playing a tape
the function to TAPE.
Press START flashes. The tape deck stands by for recording and the CD player pauses for play. Press TAPE nN again to record on the bottom side.
repeatedly until g appears to record on one side or h (or j) to record on both sides.
2 Press PLAY MODE/DIRECTION
repeatedly until g appears to play one side or h (or j*) to play both sides.
3 Press TAPE nN.
Press TAPE nN again to play the bottom side.
* The tape deck stops automatically after repeating the sequence five times.
Recording starts. When the recording is completed, the CD player and the tape deck stop automatically.
Stop play Pause Fast-forward or rewind
Press x. Press X TAPE. Press again to resume play. Press m or M.
Remove the tape Press Z PUSH OPEN/CLOSE.
When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side. If you select both sides recording and the tape reaches the end of the top side part-way through a track, the entire track is recorded again from the beginning of the bottom side. You can record only your favourite CD tracks with Programme Play. After step 2, follow the same procedures as from step 1 to 5 of Programming CD tracks on page 11, then go to step 3.
Recording an MD on a tape
MD-TAPE Synchro Recording
If the tape becomes full during recording, the CD player and the tape deck stop automatically.
1 Load a recordable tape. 2 Load an MD you want to record. 3 Press SYNCHRO MODE repeatedly until
MD-TAPE SYNC appears.
Press START flashes. The tape deck stands by for recording and the MD deck pauses for play. Press TAPE nN again to record on the bottom side.
step 4 to 6 of Recording a CD on a tape on page 46. To stop recording
Recording an MD on a tape (continued)
Recording on a tape manually
You can record just the portions you like from a CD or an MD on a tape. You can also record a radio programme. You can use TYPE I (normal) tape.
When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side. If you select both sides recording and the tape reaches the end of the top side part-way through a track, the entire track is recorded again from the beginning of the bottom side. You can record only your favourite MD tracks with Programme Play. After step 2, follow the same procedures as from step 1 to 5 of Programming MD tracks on page 17, then go to step 3.
1 Load a recordable tape. 2 Press FUNCTION repeatedly to select
If the tape becomes full during recording, the MD deck and the tape deck stop automatically.
3 Press z TAPE.
The tape deck stands by for recording. Press TAPE nN again to record on the bottom side.
4 Press PLAY MODE/DIRECTION
5 Press X TAPE, then start playing the
When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side. If you select both sides recording and the tape reaches the end of the top side part-way through a track, the entire track is recorded again from the beginning of the bottom side.
Adjusting the sound
Generating a more dynamic sound (Dynamic Sound Generator)
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth slightly moistened with mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as thinner, benzene or alcohol.
Before placing a cassette in the tape deck
Take up any slack in the tape. Otherwise, the tape may get entangled in the parts of the tape deck and become damaged.
When using a tape longer than 90 minutes
The tape is very elastic. Do not change the tape operations such as play, stop, and fast-winding frequently. The tape may get entangled in the tape deck.
To save a tape permanently
To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated.
Break off the cassette tab
Notes on CDs
Before playing a CD, clean the CD surface with a cleaning cloth. Wipe the CD from the centre out. Do not play a CD with tape, stickers, or adhesives on any of its surfaces as this may damage the system. Do not use solvents. Do not expose the CDs to direct sunlight or heat sources. Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this system. Attempting to do so may damage the system. Do not use such discs.
If you later want to reuse the tape for recording, cover the broken tab with adhesive tape.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use. Be sure to clean the tape heads before you start an important recording or after playing an old tape. Use a separately sold dry-type or wet-type cleaning cassette. For details, refer to the instructions of the cleaning cassette.
Note on CD-R/CD-RW playback
Discs recorded on CD-R/CD-RW drives may not be played back because of scratches, dirt, recording condition or the drives characteristics. Besides, the discs, which are not yet finalized at the end of recording, cannot be played back.
Demagnetising the tape heads
Demagnetise the tape heads and the metal parts that have contact with the tape after every 20 to 30 hours of use with a separately sold demagnetising cassette. For details, refer to the instructions of the demagnetising cassette.
System limitations of MDs
The recording system in your MD deck has the limitations described below. Note, however, that these limitations are due to the inherent nature of the MD recording system itself, not to mechanical causes.
Disc Full! appears before the MD has reached the maximum recording time
When 255 tracks have been recorded on the MD, Disc Full! appears regardless of the total recorded time. More than 255 tracks cannot be recorded on the MD. To continue recording, erase unnecessary tracks or use another recordable MD.
Some tracks cannot be combined with others
Track combination may become impossible when repeated editing has been done to the track(s).
The total recorded time and the remaining time on the MD do not add up to the maximum recording time
Recording is done in minimum units of 2 seconds* each, no matter how short the material. The recorded contents may be shorter than the maximum recording capacity. Disc space may also be reduced by scratches. * During Stereo recording: In Monaural or LP2 Stereo mode: about 4 seconds In LP4 Stereo mode: about 8 seconds
Disc Full! appears before the maximum number of tracks (255) is reached
Fluctuations in emphasis within tracks are sometimes interpreted as track intervals, increasing the track count and causing Disc Full! to appear.
The sound may drop-out while searching the edited tracks
Tracks created through editing may exhibit sound dropout during searching because high-speed playback requires time to search for the position on the disc when the tracks are not in order.
Track numbers cannot be marked
When L-SYNC (page 27) lights up in the display window during analogue recording, the track numbers may not be marked at the beginning of the track: if you repeatedly record the same track on the same disc using 1-track repeat, etc. if you record tracks on different discs but which have the same track number in succession. if the input signal is below a certain fixed level for less than 2 seconds between tracks. if the input signal is below a certain fixed level for more than 2 seconds in the middle of the track. if you record a track that is 4 seconds or less*. * During Stereo, Monaural or LP2 Stereo recording mode (In LP4 Stereo recording mode: 8 seconds or less).
Group Full! appears in the display
When the Group Function is on, Group Full! may be displayed if editing is performed. This means there are insufficient characters for group management. Delete any unnecessary disc titles, group titles or other characters. Even when the Group Function is off, the group management information is updated automatically when Move, Divide and other editing operations are performed, so Group Full! may be displayed.
The remaining recording time does not increase even after erasing numerous short tracks
A pre-mastered MD is in the deck. The function is switched to MD.
The MD deck cannot read the disc information properly. cRemove the MD once, then insert it again.
There is no disc in the MD deck, or the MD is protected against erasure. There is no time remaining on the MD.
Self-diagnosis display (continued)
You tried to programme 26 or more tracks (steps).
Complete! Push STOP!
The editing operation of MDs is completed.
You pressed PLAY MODE/DIRECTION (or PLAY MODE on the remote) during play.
There is no time remaining on the MD.
The MD deck is ejecting the MD.
The MD is playing the specified dividing point for confirmation during the A-B Erase Function and the Divide Function.
An attempt was made to create a new group in excess of the maximum number of groups, or there are insufficient characters for updating the group management information.
You attempted to perform another operation while in S.F Edit (changing the recording level after recording, Fade-in, Fade-out) mode.
S.F Edit NOW
You tried to make an impossible editing operation. You cannot combine or erase the tracks due to the system limitations of MDs. You cannot specify the division point at the beginning or end of a track.
You pressed ?/1 while in S.F Edit (changing the recording level after recording, Fade-in, Fade-out) mode.
The signal was input again after silence continued for 3 or more but less than 30 seconds during digital recording.
Adjustment of the recording level after recording or Fade-in and Fade-out procedures have failed since the system was either subject to vibration or there is a damaged or dirty disc in the tray. Place the system in a stable place to minimize shock and vibration. Do not use damaged or dirty discs.
Liebert 311 Source 1300 BH-703 MHC-S3 DMC-FZ5PP AGQ06 KX-480 Roadster IR310CD UXP410 Enrxwi-G STI661BF1 Diesel 3200 GA-6wmmc7 X3650 Cafamosacf250 GXT800 HBH-35 ES-FG65 PDP-505SL Pro 1000 MY16-mlan HTS3365 BES860 ER3661BNS Yamaha G50 LA40S81BX PM-4000PX 47LB7DF Xsmall HI535 K7S41GX TX-SA500 UX-F25CW TI-34 S Gate SGH-X140 Ftdx-9000MP Cusl2M Coolpix 2500 6 0 SW674ASP IRP-6- Alcatel 4035 P1022 Genus IV HBF600T Rpwf950 1 0 TCC-9310 SR110 Sound DS24 SL-BD20 CDX-490 50 2T PM6010 OSE Es100 Amis60 Iii-tutorial UP102 26LG30R 6200T SW Urc-4081 PCG-GRX500P Server MY Note WMP54GX 3245C KH 1168 WD-80185N MPK-thgb WX-T923 EF3400 LA32R81WD Express 1897 DV-SP403E Corby AN-37AG2 MAX-DT55 L64810 Multi H LK-93TV HS25YJZ User Manual AL-2040CS 5481N GT-S5603 DVD-S530 F5275 V223W Scala II 890FXA-gd70 TDM-7574R Lexmark X500 KDC-W311A INT-W250 CD4453B B Vivid 910 DP-8025 4100MFP
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101