LASYSTEMS - Brusselsesteenweg 208 - 1730 Asse - Belgium
Phone: +32-2-4531312 - Fax: +32-2-4531763 E-mail: info@lasystems.be
Sony CSS-HD2 Cyber-shot Station (CSS-HD2)

Cyber-shot Station

Price details:
Price excl. VAT: 59.09 Eco fees: 0.00 VAT 21 %: 12.41
PDF generated on: 8 June, 2011

Product details:

Product code: CSS-HD2 EAN: 4905524445220 Manufacturer: Sony

71.50

* VAT included
Product is discontinued. You can not order it anymore.
Docking station allows simple connection of Cyber-shot to HD or standard definition television set. Enjoy images with Full HD picture quality (when connected to Full HD TV set). Camera battery charges during docking - 30% faster than standard charger. Remote control supplied for easy operation. Supplied with combined HD component and SD cable for maximum compatibility with wide range of TV sets. Approx Dimensions (mm): W 124 x H 33 x D 77 excluding protrusions.

Main specifications:

Colour
Colour of product: Black 124 x 77 x 33 mm Y

Weight & dimensions

Dimensions W x D x H:

Technical details

Handheld remote control:
*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. Lasystems makes no warranty expressed or implied with respect to accuracy of the information, including price, editorials or specifications. Lasystems or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if Lasystems has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification.

3-286-877-11 (1)

eyber-shot Station eyber-shot $J}](mJ{f/lE
Operating Instructions Mode d'emploi Manual de instrucciones

ffm~B,ijt!

-----'_ ---'_

ffmi~B,ij~

A.g~~Ai

CSS-HD2

2008 Sony Corporation

English

Before operating the product, please read this manual thoroughly and retain it for future reference.

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them.

Use;,,;

Power Sources
This set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, or other sources, refer to the operating instructions.

Polarization

This set may be equipped with a polarized ac power cord plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.

Overloading

Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.

Object and Liquid Entry

Never push objects of any kind into the set through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.

Attachments

Do not use attachments not recommended by the manufacturer, as they may cause hazards.

Cleaning

Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set.

Water and Moisture

Do not use power-line operated sets near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

Power-Cord Protection

Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.

Accessories

Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer.

Ventilation

The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered. - Never cover the slots and openings with a cloth or other materials. - Never block the slots and openings by placing the set on a bed, sofa, rug, or other similar surface. - Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. - Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight.

Lightning

For added protection for this set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power-line surges.

',S~rvlce

Damage Requiring Service
Unplug the set from the wall outlet and refer servicing to qualified service personnel under the follOwing conditions: - When the power cord or plug is damaged or frayed. - If liquid has been spilled or objects have fallen into the set. - If the set has been exposed to rain or water. - If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged. - If the set does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation. - When the set exhibits a distinct change in performance - this indicates a need for service.

Servicing

Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Replacement parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety Check

Upon completion of any service or repairs to the set, as the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Table of contents

Notes on using the Cyber-shot Station

Features Trademarks

Identifying the parts Set up Placing the camera on the Cyber-shot Station Removing the camera from the Cyber-shot Station Charging the battery pack Viewing images on a TV screen Remote Commander functions Care and maintenance Changing the battery of the Remote Commander Troubleshooting Specifications
Refer to the operating instructions for your camera as well as this manual.
The Cyber-shot Station is not a dust-proofed, moist-proofed, or water proofed product.
The CSS-HD2 can be used with the DSC- T300/T75/T70/T2/W3001W170/W150/W1301W 125/W120/W115/ WIlD digital still cameras. Not all of the above models are available in all countries and regions.

About the station plates

The Cyber-shot Station is supplied with 5 station plates that are compatible with various digital cameras (hereinafter referred to as the "camera"). See page 12 for further details. Be sure to set the correct station plate that is compatible with your camera before using. If you set the wrong station plate, the 110 unit could be damaged. The illustration in this manual shows the combination of DSC-T300 and station plate for DSC-T300.
Precautions on use and storage locations: Do not use or keep the Cyber-shot Station in locations subject to the following conditions. Otherwise, the Cyber-shot Station could malfunction. Locations subject to extreme high temperature Temperatures in a hot sun or closed automobiles during summer may be extremely high, causing deformation or malfunction of the Cyber-shot Station. Locations under direct sunlight or near heaters This may cause deformation or a malfunction of the Cyber-shot Station. Locations subject to vibration Locations subject to strong magnetism Locations subject to dust particles in a sandy place or the beach Precautions on use: Even if the CHARGE lamp is not lit, the unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the unit, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). Use the nearest wall outlet to get the AC Adaptor plugged in. If any malfunctions occur using the product, unplug the AC Adaptor to cut off the power source. The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the set itself has been turned off. Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. Do not use the Cyber-shot Station in locations that are subject to strong radio waves or radiation. Images may not be played back properly. Avoid other metallic objects from coming in contact with the connecting parts of the Cyber-shot Station and the power cord. It may cause a short circuit. Precautions on recorded data: Please note that Sony will not be liable for recorded data such as images and audio data if you cannot record or play back due to a malfunction of the camera, recording media, or the Cyber-shot Station.

r;;&;;~0i----V UP buttonl
VIEW MODE button'1 - - - FACE button '1 W ZOOM button'2 - - - - -
V DOWN button '2 (CAMERA)

~--- POWER button

!-""+----- Playback Zoom (e) button
~ (Slide Show) button - - MENU button
i-+---- Playback Zoom (6)1

Index0 button

H+-4----- HOME button'2
.i - - - - - Control buttons

(IJ.~1-t4/~/.)

HD/SD button'2
*1 These functions are not supported for DSC-T75/T70/T2/W130/WI25/WI20/W1l5/WllO. *2 These functions are not supported for DSC-T75/T70/T2.
Preparing the Cyber-shot Station
Using a right-sliding station plate (such as

HD2-A)

Select a station plate. The station plates have a front side and bottom side. Front side
r. ' , ~." , ~. , ,. ,'. "
".'"",:-::.

.'.""

:'-::";;'.:.

,.', ",'". ,.

Using a left-sliding station plate (such as

HD2-B)

Sony logo

Bottom side

Hold the eyber-shot Station with one hand.

Plate name

Select the station plate corresponding with your camera. Hold the camera side guide of the station plate with the other hand and slide the station plate until it is pushed in all the way. See the table in step 1 for the sliding direction. Sliding to the right

Model name

DSC-T300 DSC-Wll 0 DSC-W115 DSC-W120 DSC-W125 DSC-W130 DSC-W150 DSC-W170 DSC-W300 DSC-T2 DSC-T70 DSC-T75

Sliding direction

Sliding to the left

HD2-C HD2-D

Left Left Right
CD Hold the station plate on the front side (the
side with the Sony logo) facing you, and place it on the I/O unit of the eyber-shot Station as if you place it over the protection cover attached on the I/O unit.
Attach the station plate.
The station plate will sink in when it is slid all
the way to the correct position. You will hear a dick when the plate is attached properly. If the station plate does not sink in properly, evenly push down on its left/right sides. The positioning marker A on the station plate and positioning marker on the Cyber-shot Station will be aligned.

AC Power cord (mains lead) To use your Cyber-shot Station abroad - Power sources
@ Detach the protection cover of the I/O unit.
Before you place a camera on the Cyber-shot Station, be sure to detach the protection cover.
Detaching the station plate
You can use the Cyber-shot Station and the AC Adaptor (supplied) in any country or region where the power supply is within 100 V to 240 V AC 50/60 Hz. Use a commercially available AC plug adaptor, if necessary, depending on the design of the wall outlet (wall socket).
Hold the Cyber-shot Station with one hand. Hold the camera side guide of the station plate with the other hand and pull the station plate upward.

I AC-lS5 KJ= -

qm:- 8
AC plug adaptor (not supplied) Do not use an electronic transformer (travel converter), as this may cause a malfunction.
Preparing the Remote Commander
Notes on the Remote Commander
Connect the supplied AC Adaptor to the DC IN jack ofthe Cyber-shot Station.
The POWER lamp of the Cyber-shot Station lights up.
The Remote Commander is powered by a button type lithium battery (CR2025) installed at the factory. An insulation sheet is inserted to avoid the battery exhaustion. Remove the insulation sheet before using the Remote Commander for the first time.

Insulation sheet -~4

Point the remote sensor of the Cyber-shot Station away from strong light sources such as direct sunlight or overhead lightings. Otherwise, the Remote Commander may not function properly.
The Remote Commander range is less than five meters (for indoor use). Point the Remote Commander at the remote sensor of the Cybershot Station. Try adjusting the angle of the Remote Commander if you cannot operate the Cyber-shot Station.
Removing the camera from the Cyber-shot Station
Placing the camera on the Cyber-shot Station
Remove the Adaptor ring, the Conversion lens, etc. from the camera. Attach the camera as shown below.
Be sure to turn off the camera before placing it on the Cyber-shot Station.
Hold the Cyber-shot Station down when you remove the camera from the Cyber-shot Station.
"Notes When removing the camera, make sure to lift the camera straight up. It may damage the camera or the Cyber-shot Station when some extra force is added to the front or the sides.
When attaching the camera, make sure to insert the camera straight down. '~'Tips Make sure that the camera is securely attached to the Cyber-shot Station.

Charging the battery pack
Place the camera with the battery pack inserted on the Cyber-shot Station.
Charging starts automatically. The CHARGE lamp of the Cyber-shot Station lights up. When the camera is turned on, the Cyber-shot Station cannot charge the battery pack. When the charging reaches to Normal charge*, the CHARGE lamp goes off. * Recording and playback time with Normal charge is approximately 90% of Full charge. For the time of the full charge for a completely discharged battery at the temperature of 25 C (77 OF), see the table below.
DSC-T300fT75fT70fT2 DSCW3001W1701W15011W1301 W1251W1201W1151W110
Approx. 160 minutes Approx. 230 minutes
- It may take longer to charge, depending on the charging condition and environment.
UNotes After attaching the camera to the Cyber-shot Station, the CHARGE lamp may blink slowly for 3 to 10 seconds. This indicates communication between the camera and the Cyber-shot Station, and it is not a malfunction. If CHARGE lamp does not light or blinks for more than 10 seconds, refer to "Troubleshooting':

Charging temperature

Viewing images on TVs other than highdefinition TV
Connect the AN OUT jack of the Cyber-shot Station and the audiolvideo input jacks of the TV.
The temperature range for charging is 0 C to 40C (32 OF to 104 OF). However, to provide maximum battery efficiency, the recommended temperature range when charging is 10C to 30 C (50 OF to 86 OF).

On battery life

. Red White Yellow Audio ~ <iJ) Video AN connecting cable
The battery life is limited. Battery capacity decreases little by little as you use it more and more, and as time passes. If the battery operating time seems shortened considerably, a probable cause is that the battery pack has reached the end of its life. Buy a new battery pack. The battery life varies according to how it is stored and the operating conditions and environment in which each battery pack is used.
Viewing images on a TV screen

You can playback images by connecting the Cybershot Station to the TV with the AN connecting cable (supplied) or the Component AIV Cable (supplied). Refer to the operating instructions supplied with the TV for connection.
Turn off the TV before connecting the Cybershot Station and TV with the Component AN Cable. The signal format to be output from the AN OUT jack depends on the camera setting. To view the 1080i format images, you need a TV compatible with 1080i format. The audio to be output from the Cyber-shot Station via the NV OUT jack is monaural. The Cyber-shot Station is not compatible with the S-VIDEO connecting cable.
Turn on the power by pressing the [E (playback) button of the camera or the POWER button on the Remote Commander.
Viewing images on a high-definition TV
Connect the AN OUT jack of the Cyber-shot Station and the Component AV jacks of the TV.
'~'Tips The buttons on the camera or the Remote Commander may not function immediately after the camera is attached to the Cybershot Station. This occurs when the camera is booting up and is not a malfunction. Wait for about 10 seconds.
Turn on the TV and set the input switch to the input connected in step 1. Press ~/~ on the Control buttons of the Remote Commander to select the image.
You can also select the image by pressing ~/~ on the Control buttons of the camera.
,,==---,r---~ Red --<IIIlIDWhite
_"'lIIIlI-.Green '==f--" Blue Red

~ Audio

PB/CB PRICR
The Cyber-shot Station is compatible with both NTSC and PAL TV systems. For further details, see the operating instructions supplied with the camera.

Component AN Cable

To cancel Slide Show
Remote Commander functions
The functions of the Remote Commander differ depending on the camera you use. For further information, refer to the operating instructions supplied with the camera.
Press the ~ (Slide Show) button on the Remote Commander again. For further information, refer to the operating instructions supplied with the camera.

Switching the view mode

You can change the index display by pressing the VIEW MODE button on the Remote Commander. Except for DSC- T7S/T70/T2/W1301W12S/W1201 WllS/Wl10.
Turn on the power of the camera by pressing the ~ (playback) button of the camera or the POWER button on the Remote Commander. Press the VIEW MODE button on the Remote Commander.
The view mode screen appears.
Use the control buttons on the Remote Commander to select the desired view mode and press the center. button.
The images are displayed in index mode using the view mode you just selected.

Slide show

You can play back a series of still images recorded with your camera by only pressing the ~ (Slide Show) button on the Remote Commander.
Turn on the power of the camera by pressing the ~ (playback) button of the camera or the POWER button on the Remote Commander. Press the ~ (Slide Show) button on the Remote Commander.

When you press the V UP button and V DOWN button on the Remote Commander, you can perform the following functions in each view mode. - Date View mode: Display the previous date and next date. - Folder mode: Display the previous folder and next folder. - Favorites mode: Display the previous page and next page.

Filter by Faces

You can search the images recorded with various faces by pressing the FACE button on the Remote Commander. Except for DSC- T7S/T70/T2/W1301W12S/W1201 WllSlWllO.
The Slide Show settings screen appears. The Slide Show settings screen may not be displayed on some models even if you press the ~ (Slide Show) button. The Slide Show will start in the preset conditions. For further details about the setting method, refer to the operating instructions supplied with the camera.
Use the control buttons on the Remote Commander to change the settings of the Slide Show. Use the control buttons on the Remote Commander to select [OK] and press the center. button or press the (Slide Show) button on the Remote Commander.
Turn on the power of the camera by pressing the ~ (playback) button of the camera or the POWER button on the Remote Commander. Press the FACE button on the Remote Commander.
The Search images menu appears.
Use the control buttons on the Remote Commander to select the search condition and press the center. button.
For further information, refer to the operating instructions supplied with the camera.
The images are displayed in index mode in accordance with the search condition. For further information, refer to the operating instructions supplied with the camera.

Care and maintenance

Clean the Cyber-shot Station with a soft cloth slightly moistened with water or tepid water, and wipe the surface with a dry cloth. Do not use any type of solvent such as thinner, alcohol or benzine as this may damage the surface.
Switching between HD and SO
You can switch the TV display between highdefinition video (HD) and other than highdefinition video (SD) by pressing the HD/SD button on the Remote Commander. Except for DSC-T75/T70/T2.

Turn on the power of the camera by pressing the (playback) button of the camera or the POWER button on the Remote Commander.
Changing the battery of the Remote Commander
Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire. When the lithium battery becomes weak, the operating distance of the Remote Commander may shorten, or the Remote Commander may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.
Press the HD/SD button on the Remote Commander.
Every time you press the HD/SD button, the setting will change alternately between HD and SD. The HD-OUTPUT lamp (blue) of the Cyber-shot Station lights up while the HD video is viewed on a TV For further information, refer to the operating instructions supplied with the camera.
For the State of California, USA only
Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate.

Wide Zoom Display

You can display a still image with an angle of view of 4:3 or 3:2 to those of 16:9 by pressing the W ZOOM button on the Remote Commander, which is the same as the wide zoom function of the camera. For DSC-T75/T70, the Wide Zoom functions when you press the T button on the Remote Commander. Except for DSC-T2.
Replace the battery with the specified type only. Otherwise, fire or injury may result.
Replacing the button type lithium battery
* Do not use any batteries other than CR2025.
<D Pull out the battery holder while pushing the

tab on the holder.

Put a new battery into the holder with its +

side facing upward.

Press the W ZOOM button on the Remote Commander.
Insert the holder into the Remote
Commander until it clicks.
Every time you press the W ZOOM button, the setting will change alternately between Wide Zoom and Normal modes. The Wide Zoom mode is canceled when you turn off the camera or the shooting mode is switched. Some functions of the Remote Commander will be unavailable when you are using the Wide Zoom function.

Troubleshooting

If any problems occur with your products, refer to the following solutions. If the problem persists, contact your Sony dealer.

Symptom

Cause/Solution
Unable to charge the battery pack or the The camera is turned on. -+ Turn the camera off. CHARGE lamp fails to light. The AC Adaptor is disconnected. -+ Connect the AC Adaptor properly. The camera is not placed on the Cyber-shot Station correctly. -+ Place the camera correctly. The battery pack is not installed correctly. -+ Install the battery pack correctly. The battery pack is completely charged. The battery pack installed into the camera is inapplicable. -+ Install the battery pack compatible with your camera. The CHARGE lamp blinks fast, or blinks The battery pack installed into the camera is inapplicable. -+ Install the battery pack compatible with your camera. for more than 10 seconds. The connection is not correct. The camera is not placed correctly on the Cyber-shot Station. -+ Remove the camera from the Cyber-shot Station and reconnect the AC Adaptor. After the CHARGE lamp goes off, place the camera on the Cyber-shot Station. Unable to tum on the camera, or it suddenly gets turned off. The camera is not placed on the Cyber-shot Station correctly. -+ Place the camera correctly. The AC Adaptor is disconnected. -+ Connect the AC Adaptor properly. The HD output setting is incorrect. -+ Refer to the operating instructions supplied with the camera, and set the HD output setting correctly. The Component A/V Cable or A/V connecting cable from the Cyber-shot Station is not connected properly to the TV. -+ Connect the cable properly or correct the setting. The camera is not placed correctly on the Cyber-shot Station. -+ Place the camera correctly. The AC Adaptor is disconnected. -+ Connect the AC Adaptor properly. The battery in the Remote Commander is dead. -+ Replace the battery with a new one. The station plate is not attached properly. -+ Confirm that the station plate is compatible with your camera and attach it properly.

The images cannot be played back on a TV:
Buttons on the Remote Commander do not work, and no operations can be performed.
Unable to attach the camera on the Cyber-shot Station or the camera is unstable.

Specifications

Input/Output connectors

Included items

Cyber-shot Station (CSS-HD2) (1) Wireless Remote Commander (RMT-CSS6) (A button type lithium battery installed) (1) Station plate (5) AN connecting cable (1) Component AN Cable (1) AC Adaptor (AC-LS5) (1) AC Power cord (mains lead) (1) Protection cover (1) Set of printed documentation

AN OUT jack:

Component, Video/audio output connector DC IN jack I/O unit

General

Dimensions (Approx.): 124 x 48 x 78 mm (5 x 1 15/16 x 3 1/8 in.) (w/h/d) Mass (Approx.): 110 g (3.9 oz.) (including a station plate) Operating temperature: o C to 40C (32 of to 104 OF) Storage temperature: -20C to +60 C (-4 of to +140 OF)
Design and specifications are subject to change without notice.

ACAdaptor

Input rating: 100 V to 240 V, AC 50/60 Hz, llW Output rating: 4.2 V DC See the label on the AC Adaptor for other specifications. Dimensions (Approx.): 48 x 29 x 81 mm (115/16 x 1 3/16 x inches) (w/h/d, excluding projecting parts) Mass (Approx.): 130 g (5 oz) (excluding AC Power cord) Operating temperature: o C to 40C (32 of to 104 OF) Storage temperature: -20C to +60 C (-4 of to +140 OF)
Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Imprime sur papier recycle 70 % ou plus avec de I'encre base d'huile vegetale sans COV (composes organiques volatils). Impreso en papel reciclado en un 70% 0 mas utilizando tinta hecha con aceite vegetal exento de compuesto organico volatil (COV).
ffm~~~$~ voc (.V~~*~:7t) 70% ~.A.tiij~~.tEIUil~o
ffm~T~$~ (t~~~m~:7t) 70% ~.A.t iij ~~.t EIUil~ 0

~ti~5m~5m~{

~ti~5m~5m.{

http://www.sony.net!

Printed in Japan
I3286877110 I 1111 ~IIIIIIIII ml

Consumer 1 Year Warranty

Sony of Canada Ltd. ("Sony") hereby warrants, subject to the terms and conditions herein set forth, this product against defects in material and workmanship during the specified warranty period. In the event of a defect of material or workmanship during the specified warranty period, Sony will repair the same, effecting all necessary parts replacements with either new or refurbished parts, without charge for either parts or labour. The warranty period is as follows: Labour and Parts: ONE year from the date of original purchase at retail. Conditions: Unauthorized Modification, Repair, Abuse, Etc.: This limited warranty is void if: (i) the unit has been previously altered, modified, installed or mounted for commercial use, or repaired or serviced byanyone other than the service facilities authorized by Sony to render such services, (ii) the serial number on the unit has been altered or removed, or (iii) the unit has been sUbject to accident, misuse, abuse or operated contrary to the instructions contained in the Owner's Manual. The opinion of Sony with respect to this matter shall be final. Commercial Use or Rental: This product is not intended for commercial use or rental. Should this unit be used at any time for commercial purposes or as a rental unit, the limited warranty period for parts and labour shall be 90 days from the date of original purchase at retail. The opinion of Sony with respect to this matter shall be final. Exclusions: This limited warranty does not extend to broken or damaged cabinets, accessories, batteries, exposed antennas and styluses, or to parts wearing out due to normal wear and tear. This limited warranty does not cover regular product maintenance such as cleaning, lubrication or check-ups. This limited warranty covers only the hardware components packaged with the product. It does not cover technical assistance for hardware or software usage and.it does not cover any software products whether or not contained in the product. Any such software is provided "AS IS" unless expressly provided for in any enclosed software limited warranty. Please refer to the End User License Agreements included with the product for your rights and obligations with respect to the software. This limited warranty is valid only in Canada. Delivery: The unit must be delivered in person to one of the nearest Sony service facilities in Canada, or shipped, freight prepaid, in either its original package or similar package affording an equal debree of protection and with instructions indicating alocation within Canada to which the unit may be returned. If shipped to the service facility, the repaired unit will be returned to customer freight prepaid. All accessories tbatare enclosed with the unit must be listed individually on the packing slip for the shipping documentation. Defective accessories should be shipped to Sony as a separate repair item. Sony shall have no liability whatsoever for loss or damage in transit of items shipped to service facilities. Any parts replaced under this limited warranty will become the property of Sony. It Is your responsibility to back up any data, software or other materials you may have stored or preserved on your unit. It is likely that such data, software, or other materials will be lost or reformatted during service and Sony will not be responsible for any such damage or loss. Proof of Purchase: This limited warranty applies to the product from the original date of purchase at retail. The owner must furnish proof of original purchase at retail.

Sony Customer Information Services Center 1-800-222-7669 or visit the Sony Web Site: www.sony.com
For an accessory or part not available from your authorized dealer, call: 1-800-488-S0NY (7669)