Reviews & Opinions
Independent and trusted. Read before buy Sony Cyber-shot DSC-S730!

Sony Cyber-shot DSC-S730

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Sony Cyber-shot DSC-S730 Digital Camera, size: 3.9 MB
Related manuals
Sony DSC-S730 Annexe 5
Sony Cyber-shot DSC-S730 Annexe 1
Sony Cyber-shot DSC-S730 Annexe 3
Sony Cyber-shot DSC-S730 Annexe 2
Sony Cyber-shot DSC-S730 Annexe 4

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony Cyber-shot DSC-S730About Sony Cyber-shot DSC-S730
Here you can find all about Sony Cyber-shot DSC-S730 like manual and other informations. For example: review, driver, digital camera.

Sony Cyber-shot DSC-S730 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Sony Cyber-shot DSC-S730 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Sony Cyber-shot DSC-S730 photo ]

Video review

Sony Cyber Shot DSC S730

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 6. Page 1 of 1. Average Rating:
Harshad Patel 6:29am on Wednesday, November 3rd, 2010 
Last less than 8 months... Do not buy this piece of crap! my second sony camera and no positive results whatsoever, bottom line sony sucks. Sony of Yesteryear Product works well but would not have purchased had I been aware that this model was discontinued
ccooper 9:48pm on Friday, September 10th, 2010 
Sony Camera Takes a lot of juice, a bit bulky but quality is good and very sturdy. Good buy but I think better versions are available. sony cybershot The best little camara i have ever had the pleasure using excelent pictures good all round camara It is not really good enough I also own a Sony DSC-H2 so when I needed a small pocket-size camera to take to function.
sfb 1:32am on Friday, August 6th, 2010 
"The camera started off ok, but over time many of the pictures turned out blurry. I tried different settings, reading, and rereading the manual.
Budulaj 4:19am on Monday, July 19th, 2010 
This is a great camera for just about everything. I took this on a trip to Europe, and the pictures came out excellent. I bought this camera for my Mom. It was a great camera for her as she is a beginner in the use of digital cameras. Comfortable Controls, Easy Setup. NOT GOOD at all it takes to long for the flash by the time it does everyones change their expression i definantly do not recommend.
marksimon 11:49pm on Friday, May 7th, 2010 
I purchased my Sony Cybershot DSC-S730 about a year ago, before a trip back east to see family and friends in New Jersey. As those who have read my recent reviews will know, I have a lot of experience in photography and have used and owned a great many digital cameras. The Sony Cyber-shot DSC-S730 Digital Camera, at 7,1 Mega-Pixels, is a great point and shoot digital camera for the price. Coming in at $129.
redsun 6:15am on Tuesday, April 6th, 2010 
Sony Cybershot S730 has the form of light, compact, and easy to use,. You like. If you use Sony numerical code picture printer *2, Memory in the StickTM insertion printer.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

White circular spots

This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are accentuated by the cameras flash, they appear as white circular spots.
Camera Subject Particles (dust, pollen, etc.) in the air
How can the White circular spots be reduced? Light the room and shoot the subject without a flash. Select (High Sensitivity mode)* in Scene Selection. (The flash is turned off automatically.) * Even though you selected (High Sensitivity mode) in Scene Selection, the shutter speed might be slower under low-light conditions, or in a dark place. In that case, use a tripod or hold your arms firmly at your side after pressing the shutter button.

Identifying parts

See the pages in parentheses for details of operation.

Bottom

A Shutter button (21) B Self-timer lamp (23) C Microphone D Lens E POWER button F POWER lamp G Flash (22) H Buzzer I (USB) A/V OUT terminal (side)

qf qd qa qs

A For shooting: Zoom (W/T) button (22) For viewing: / (Playback zoom) button/ (Index) button (28, 29) B LCD screen (18) C (Playback) button (28) D Hook for strap E Mode dial (20) F MENU button (30)
Press MENU longer to display the (Setup) screen.
G Control button Menu on: v/V/b/B/z (30) Menu off: DISP/ / / (18, 22-23) H For shooting: (24) For viewing: (Image Size) button (Delete) button (28)
I AC adaptor cord cover When using an AC-LS5K AC Adaptor (not supplied)
Do not pinch the cord when you close the cover. You cannot charge the Nickel-Metal Hydride batteries by the AC-LS5K AC Adaptor. Use the battery charger to charge the Nickel-Metal Hydride batteries.
J Access lamp K Tripod receptacle
Use a tripod with a screw less than 5.5 mm (7/32 inch) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.
L Battery/Memory Stick Duo cover M Memory Stick Duo slot N Batteries insertion slot

Indicators on the screen

Each time you press v (DISP) on the control button, the display changes (page 18). See the pages in parentheses for details of operation. A

Display Indication

Battery remaining z
AE/AF lock (21) Recording mode (21, 39) White balance (37) Standby/Recording a movie Mode dial (Scene Selection) (25) Mode dial (Program Auto) (20) Camera mode
When shooting still images

STBY REC

Flash mode (22) Flash charging Zoom scaling (22, 49)

When shooting movies

Red-eye reduction (50) Sharpness (40) Metering mode (36) RICH NATURAL SEPIA B&W Color mode (32)
Macro (23) AF range finder frame indicator (34) 1.0 m Focus preset distance (34)

Display

7M 3M 3:2 5M
Indication Display Indication

Image size (24)

Histogram (18)

VGA 16:9

Recording folder (52)
This does not appear when using internal memory.
125 F2.8 +2.0EV (not displayed on the screen on the previous page)
Shutter speed Aperture value Exposure Value (33) Menu (30)
Remaining internal memory capacity Remaining Memory Stick capacity 0:12 [00:00:40] 12 Recording time [maximum recordable time] Remaining number of recordable images Self-timer (23) ISO number (38)

Vibration warning

Indicates vibration may prevent you from shooting clear images due to insufficient lighting. Even if the vibration warning appears, you can still shoot images. However, we recommend that you use the flash for better lighting or using a tripod or other means to stabilize the camera (page 7).
Low battery warning (92) Spot metering cross hairs (36) AF range finder frame (34)
When playing back still images
Battery remaining Recording mode (21)
Playback mode Protect (42) Print order (DPOF) mark (80) Changing folder (41)

When playing back movies

Zoom scaling (28) Playback (28)

101-0012

Folder-file number (41) Playback bar
PictBridge connecting (77)
appears when histogram display is disabled.

Playback folder (41)

1 9:30 AM
Recorded date/time of the playback image Menu (30) Selecting images
Remaining internal memory capacity Remaining Memory Stick capacity 8/8 12/12 Image number/Number of images recorded in selected folder Counter

BACK/ NEXT

00:00:12
PictBridge connecting (78)
Do not disconnect the dedicated USB cable while the icon is displayed.

+2.0EV

Exposure Value (33) ISO number (38) Metering mode (36) Flash
White balance (37) Shutter speed Aperture value

500 F2.8

Changing the screen display
v DISP (Screen display) button
If you view images in bright outside light, adjust the brightness of the LCD backlight up. However, the battery power may decrease faster under such condition. The histogram does not appear in the following situations: While shooting When the menu is displayed. When recording movies. During playback When the menu is displayed. In index mode. When you are using playback zoom. When you are rotating still images. During playback of movies. A large difference in the histogram displayed during shooting and playback may occur when: The flash strobes. The shutter speed is slow or fast. The histogram may not appear for images recorded using other cameras. z Adjusting EV (Exposure Value) by displaying a histogram

Press T to zoom, press W to undo the zoom.
When the zoom scale exceeds 3, the camera uses the Digital Zoom function. For details on the [Digital Zoom] settings and the image quality, see page 49. You cannot change the zoom scale while shooting a movie.
Flash (Selecting a flash mode for still images)
Press B ( ) on the control button repeatedly until the desired mode is selected.
(No indicator): Flash Auto Strobes when there is insufficient light (default setting) : Flash forced on SL : Slow synchro (Flash forced on) The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light. : Flash forced off The flash strobes twice. The first flash adjusts the light quantity. While charging the flash, is displayed.
Macro (Shooting close-up)
Press b ( ) on the control button repeatedly until the desired mode is selected.
(No indicator): Macro Off : Macro On (W side: Approx. 5 cm or farther (2 inches or farther), T side: Approx. 35 cm or farther (13 7/8 inches or farther) from the front of the lens) Setting the zoom all the way to the W side is recommended. The in-focus range becomes narrow, and the subject may not be entirely in focus. The Auto Focus speed drops when you shoot images in the Macro.

Using the self-timer

Press V ( ) on the control button repeatedly until the desired mode is selected.
(No indicator): Not using the self-timer : Setting the 10-second delay self-timer : Setting the 2-second delay self-timer
When you press the shutter button, the self-timer lamp flashes and a beep sounds until the shutter operates.

Self-timer lamp

To cancel, press V (

) again.

Use the 2-second delay self-timer to prevent blur of an image. The shutter is released 2 seconds after you press the shutter button, which reduces camera shake when the shutter button is pressed.
To change the still image size
Press (Image Size), and then press v/V to select the size. For details on the image size, see page 10. The default setting is marked with.
Image size 7M (30722304) 3:2*1 (30722048) 5M (25921944) 3M (20481536) VGA (640480) Guidelines Up to A3/1117" print Match 3:2 Aspect Ratio Up to A4/810" print Up to 1318cm /57" print For E-mail More 16:9*2 (19201080)

To cancel protection of all images in the folder
Select [All In This Folder] in step 4 of To protect images in index mode, and press z. Select [Off] with B, then press z.
Note that formatting the internal memory or Memory Stick Duo erases all the data stored on the recording media, even if the images are protected, and these images cannot be restored. It may take some time to protect an image.
DPOF: Adding a Print order mark
Adds a (Print order) mark to images you want to print (page 80).
(Print): Printing images using a printer
Printing images shot with the camera. See page 76.
(Slide): Playing back a series of images
Plays back recorded images in order (Slide show).

Interval

3 sec 5 sec 10 sec 30 sec 1 min
Sets the slide show interval.

Repeat

On Off
Plays back images in a continuous loop. After all the images have been played back, the slide show ends.
You can select only when you use a Memory Stick Duo (not supplied).

Folder All

Plays back all the images in the selected folder. Plays back all the images in a Memory Stick Duo in order.

Start Cancel

See the following procedure. Cancels the slide show.
1 Select [Interval], [Repeat] and [Image] with v/V/b/B on the control button. 2 Select [Start] with V/B, then press z. The slide show starts. To end the slide show, press z to pause the slide show. Select [Exit] with V, then press z.
When pausing during the slide show, you can display the previous/next image with b/B.
(Resize): Changing the image size of a recorded image

Large size

Small size
You can change the image size of a recorded image (Resize), and save it as a new file. The original image is retained even after resizing.

7M 5M 3M VGA Cancel

Cancels resizing. For details on guidelines for selecting the image size, see page 24.
1 Display the image you want to resize. 2 Press MENU to display the menu. 3 Select [Resize] with b/B on the control button, then press z. 4 Select the desired size with v/V, then press z. The resized image is recorded in the recording folder as the newest file.

Recommended environment for copying images
OS (pre-installed): Microsoft Windows 2000 Professional SP4, Windows XP* SP2/Windows Vista*
Operation is not assured in an environment based on an upgrade of the operating systems described above or in a multi-boot environment.
USB jack: Provided as standard
Recommended environment for using Picture Motion Browser
OS (pre-installed): Microsoft Windows 2000 Professional SP4, Windows XP* SP2/Windows Vista* CPU/Memory: Pentium III 500 MHz or faster, 256 MB of RAM or more (Recommended: Pentium III 800 MHz or faster and 512 MB of RAM or more) Hard Disk: Disk space required for installation approximately 200 MB Display: Screen resolution: 1,dots or more Colors: High Color (16-bit color) or more
* 64-bit editions and Starter (Edition) is not supported.
Installing the software (supplied)
You can install the software (supplied) using the following procedure.

Log in as Administrator.

4 Select the [Region] and [Country/
Area], then click [Next]. When the [Welcome to the InstallShield Wizard for SonyPicture Utility] appears, click [Next]. The License Agreement screen appears. Read the agreement carefully. If you accept the terms of the agreement, click the radio button next to [I accept the terms of the license agreement] and then click [Next].
1 Turn on your computer, and insert
the CD-ROM (supplied) into the CD-ROM drive. The installation menu screen appears.
5 Follow the instructions on the
If it does not appear, double-click (My Computer) t (SONYPICTUTIL). Under Windows Vista, the AutoPlay screen may appear. Select Run Install.exe. and follow the instructions that appear on the screen to proceed with the installation.
screen to complete the installation.
When the restarting confirmation message appears, restart the computer following the instructions on the screen. DirectX may be installed depending on the system environment of your computer.

2 Click [Install].

The Choose Setup Language screen appears.

Image files are named as follows: Still image files: DSC0ssss.JPG Movie files: MOV0ssss.AVI Index image files that are recorded when you record movies: MOV0ssss.THM ssss stands for any number within the range from 0001 to 9999. The numerical portions of the name of a movie file recorded in movie mode and its corresponding index image file are the same. For more information about folders, see pages 41 and 52.
Copying images to a computer without Picture Motion Browser
You can copy images to your computer without Picture Motion Browser as follows.
Copying images to a computer -Windows XP/Vista
This section describes an example of copying images to a My Documents (For Windows Vista: Documents).
For a computer with a Memory Stick slot
Remove the Memory Stick Duo from the camera and insert it in the Memory Stick Duo Adaptor. Insert the Memory Stick Duo Adaptor in the computer and copy the images.
Even when you are using Windows 95/98/98 SecondEdition/NT/Me, you can copy images by inserting the Memory Stick Duo into the Memory Stick slot on your computer. If the Memory Stick PRO Duo is not recognized, see page 87.
1 Prepare the camera and a
computer. Perform the same procedure as described in Preparing the camera and the computer on page 65.
For a computer without a Memory Stick slot
Make a USB connection and follow Stages to copy images.
The screen displays shown in this section are the examples for copying images from Memory Stick Duo. The camera is not compatible with Windows 95/ 98/98 SecondEdition/NT/Me of the Windows operating system. When you use a computer without a Memory Stick slot, use a commercially available Memory Stick Reader/Writer to copy images from a Memory Stick Duo to your computer. To copy images in the internal memory to your computer, copy the images to a Memory Stick Duo first, then copy them to your computer.
2 Connect the camera to your
computer with the dedicated USB cable. Perform the same procedure as described in Connecting the camera to your computer on page 65.
If Picture Motion Browser is already installed, then [Import Media Files] automatically starts on Picture Motion Browser. Select [Cancel] to finish.

Using your Macintosh computer
You can copy images to your Macintosh computer.
Picture Motion Browser is not compatible with Macintosh computers.
Copying and viewing images on a computer
Macintosh computer. Perform the same procedure as described in Preparing the camera and the computer on page 65.
OS (pre-installed): Mac OS 9.1/9.2/ Mac OS X(v10.1 to v10.4) USB jack: Provided as standard
2 Connect the dedicated USB cable.
Perform the same procedure as described in Connecting the camera to your computer on page 65.
Notes on connecting your camera to a computer
Operations are not guaranteed for all the recommended computer environments mentioned above. If you connect two or more USB devices to a single computer at the same time, some devices, including your camera, may not operate depending on the types of USB devices you are using. Operations are not guaranteed when using a USB hub. Connecting the camera using a USB interface that is compatible with Hi-Speed USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as the camera is compatible with HiSpeed USB (USB 2.0 compliant). There are two modes for a USB connection when connecting a computer, [Mass Storage] (default setting) and [PTP] modes. This section describes [Mass Storage] as an example. For details on [PTP], see page 56. When your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time.
3 Copy image files to the Macintosh

computer.

1Double-click the newly recognized icon t [DCIM] t the folder where the images you want to copy are stored. 2Drag and drop the image files to the hard disk icon. The image files are copied to the hard disk.
For details on the storage location of the images and file names, see page 67.
4 View images on the computer.
Double-click the hard disk icon t the desired image file in the folder containing the copied files to open that image file.
Drag and drop the drive icon or the icon of the Memory Stick Duo to the Trash icon beforehand when you perform the procedures listed below, or the camera is disconnected from the computer.
Disconnecting the dedicated USB cable Removing a Memory Stick Duo Inserting a Memory Stick Duo into the camera after copying images from the internal memory Turning off the camera

3 Select
(Setup2) with V, then select [USB Connect] with v/V/B.
4 Select [PictBridge] with B/v, then

press z.

An index print function may not be provided depending on the printer. The quantity of images that can be printed as an index image differ depending on the printer. You cannot print movies. If the indicator flashes on the screen of the camera for about five seconds (error notification), check the connected printer.

The USB mode is set.

Stage 2: Connecting the camera to the printer

Stage 3: Printing

Regardless of what the mode dial is set to, the print menu appears when you complete Stage 2.
1 Connect the camera to the printer.
1 To the (USB) A/V OUT terminal Dedicated USB cable 2 To the USB jack
1 Select the desired printing
method with v/V on the control button, then press z. [All In This Folder] Prints all the images in the folder. [DPOF image] Prints all the images with a (Print order) mark (page 80) regardless of the displayed image. [Select] Selects images and prints all the selected images.
1Select the image you want to print with b/B, then press z. The mark appears on the selected image.
To select other images, repeat this procedure.
2 Turn on your camera and the

printer.

After the connection is made, the indicator appears.
2Select [Print] with V, then press z.
[This image] Prints a displayed image.
If you select [This image] and set [Index] to [On] in step 2, you can print a set of the same images as an index image.
The camera is set to playback mode, then an image and the print menu appear on the screen.
2 Select print settings with v/V/b/B.
3 Select [OK] with V/B, then press

z. The image is printed.

Do not disconnect the dedicated USB cable while the (PictBridge Connecting) indicator appears on the screen.
[Index] Select [On] to print as an index image. [Size] Select the size of the printing sheet. [Date] Select [Day&Time] or [Date] to insert the date and time on images.
When you choose [Date], the date will be inserted in the order you select (page 57). This function may not be provided depending on the printer.

indicator

To print other images
After step 3, select [Select] and the desired image with v/V, then perform from step 1.
[Quantity] When [Index] is set to [Off]: Select the number of sheets of an image that you want to print. The image will be printed as a single image. When [Index] is set to [On]: Select the number of sets of images that you want to print as an index image. If you selected [This image] in step 1, select the number of the same image you want to print side by side on a sheet as an index image.

The designated number of images may not all fit onto a single sheet depending on the quantity of images.
To print images on the index screen
Perform Stage 1: Preparing the camera (page 76) and Stage 2: Connecting the camera to the printer (page 77), then proceed with the following. When you connect the camera to a printer, the print menu appears. Select [Cancel] to turn off the print menu, then proceed as follows.
1 Press (Index). The index screen appears. 2 Press MENU to display the menu. 3 Select (Print) with B, then press z. 4 Select the desired printing method with v/ V, then press z.

[Select]

Selects images and prints all the selected images. Select the image you want to print with v/ V/b/B, then press z to display the mark. (Repeat this procedure to select other images.) Then, press MENU.

[DPOF image]

Prints all the images with a (Print order) mark regardless of the displayed image.

[All In This Folder]

Prints all the images in the folder. 5 Perform steps 2 and 3 of Stage 3: Printing (page 77).

Printing at a shop

You can take a Memory Stick Duo containing images shot with your camera to a photo printing service shop. As long as the shop supports photo printing services conforming to the DPOF, you can make a (Print order) mark on images in advance so that you do not need to reselect them when you print them out at the shop.
You cannot print images stored in the internal memory at a print shop directly from the camera. Copy the images to a Memory Stick Duo, then take the Memory Stick Duo to the print shop.
Marking in single image mode
MENU button Control button
1 Display the image you want to

print.

What is DPOF?
DPOF (Digital Print Order Format) is a (Print function allowing you to make a order) mark on images of Memory Stick Duo that you want to print out later.
You can also print the images with the (Print order) mark using a printer that conforms to the DPOF (Digital Print Order Format) standard or using a PictBridge compliant printer. You cannot mark movies.

The subject is not visible on the screen.
Your camera is set to the Playback mode. Press
(Playback) to change to the recording

mode (page 28).

The image is out of focus.
The subject is too close. Shoot in
(Macro) recording mode. Make sure to position the lens farther away from the subject than the shortest shooting distance, approximately 5 cm (2 inches) (W)/35 cm (13 7/8 inches) (T) from the front of the lens, when shooting (page 23). (Twilight mode) or (Landscape mode) is selected in the Scene mode when shooting still images. The Focus preset function is selected. Select the auto focus mode (page 34). Refer to If the subject is out of focus on page 35.

Zoom does not work.

You cannot use the smart zoom when the image size is set to [7M] or [3:2]. You cannot use the digital zoom while shooting movies. You cannot change the zoom scale while shooting movies.

The flash does not work.

The flash is set to (Flash forced off) (page 22). You cannot use the flash when: [REC Mode] is set to [Burst] (page 39). (High Sensitivity mode) or (Twilight mode) is selected in the Scene mode (page 27). Shooting movies. Set the flash to (Flash forced on) when (Landscape mode), (Beach mode), or
(Snow mode) is selected in the Scene mode (page 22).
Fuzzy specks appear in images shot using the flash.
Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This
is not a malfunction (page 11).
The close-up shoot function (Macro) does not work.

(Twilight mode) or

(Landscape mode) is selected in the Scene mode (page 27).
The date and time are not displayed.
While shooting, the date and time are not displayed. They are displayed only during playback.
Cannot insert dates on images.
This camera does not have a feature for superimposing dates on images (page 89).
By using Picture Motion Browser, you can print or save images with the date (page 64).
The F value and shutter speed flash when you press and hold the shutter button halfway down.
The exposure is incorrect. Correct the exposure (page 33).
The screen is too dark or too bright.
Select the brightness of the LCD backlight (page 18).

The image is too dark.

You are shooting a subject with a light source behind the subject. Select the metering mode
(page 36) or adjust the exposure (page 33).

The image is too bright.

Adjust the exposure (page 33).
The image colors are not correct.
Set [Color Mode] to [Normal] (page 32).
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring and white, black, red, purple, or other streaks appear on
the image. This phenomenon is not a malfunction.
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] in the (Setup) menu to [On] (page 50). Shoot the subject at a distance closer than the flash range using the flash. Light the room and shoot the subject.
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded (page 2).
Cannot shoot images in succession.
The internal memory or Memory Stick Duo is full. Delete unnecessary images (page 28). The battery level is low. Insert new batteries or charged Nickel-Metal Hydride batteries (not

supplied).

Cannot play back images.
Press (Playback) (page 28). The folder/file name has been changed on your computer (page 71). Sony does not guarantee playback of image files on the camera if the files have been
processed using a computer or recorded with another camera.
The camera is in USB mode. Delete the USB connection (page 67).
The display indicators are turned off. Show the display indicators by pressing v (DISP) on the
control button (page 18).
The image appears rough right after playback starts.
This may happen due to image processing. This is not a malfunction.
The image does not appear on the TV.
Check [Video Out] to see if the video output signal of your camera is set to the color system of

your TV (page 56).

Check whether the connection is correct (page 58).

Cannot delete an image.

Cancel the protection (page 43).
The resizing function does not work.
You cannot resize movies.
Computer OS compatibility with camera is unknown.
Check Recommended computer environment on page 61 for Windows, and page 72 for

Memory Stick type Recording/ Playback Data may be corrupted in the following cases: When the Memory Stick Duo is removed or the camera is turned off during a read or write operation. When the Memory Stick Duo is used in locations subject to static electricity or electrical noise. We recommend backing up important data on a hard disk of your computer. Do not press down hard when you write down on the memo area. Do not attach a label on the Memory Stick Duo itself nor on a Memory Stick Duo Adaptor. When you carry or store the Memory Stick Duo, put it in the case supplied with it. Do not touch the terminal section of the Memory Stick Duo with your hand or a metal object. Do not strike, bend or drop the Memory Stick Duo. Do not disassemble or modify the Memory Stick Duo. Do not expose the Memory Stick Duo to water. Do not leave the Memory Stick Duo within the reach of small children. They might accidentally swallow it. Do not insert anything other than a Memory Stick Duo into the Memory Stick Duo slot. Otherwise, a malfunction may result. Do not use or store the Memory Stick Duo under the following conditions: High temperature locations such as the hot interior of a car parked in direct sunlight Locations exposed to direct sunlight Humid locations or locations with corrosive substances present
Memory Stick Duo (with MagicGate) Memory Stick Duo (without MagicGate) MagicGate Memory Stick Duo Memory Stick PRO Duo Memory Stick PRO-HG Duo

*1) Memory

a*1 a*2 a*1*2 a*1 a*1*3
Stick Duo, MagicGate Memory Stick Duo and Memory Stick PRO Duo are equipped with MagicGate functions. MagicGate is copyright protection technology that uses encryption technology. Data recording/playback that requires MagicGate functions cannot be performed with the camera. *2) The camera is not compatible with high-speed data transfer using a parallel interface. *3) The camera is not compatible with 8-bit parallel data transfer. Supports 4-bit parallel data transfer equivalent to Memory Stick PRO Duo. This product is compatible with Memory Stick Micro (M2). M2 is an abbreviation for Memory Stick Micro. A Memory Stick Duo formatted with a computer is not guaranteed to operate with the camera. Data read/write speeds differ depending on the combination of the Memory Stick Duo and the equipment used. Do not remove the Memory Stick Duo while reading or writing data.

Notes on using the Memory Stick Duo Adaptor (not supplied)
To use a Memory Stick Duo with a Memory Stick compliant device, be sure to insert the Memory Stick Duo into a Memory Stick Duo Adaptor. If you insert a Memory Stick Duo into a Memory Stick compliant device without a Memory Stick Duo Adaptor, you might not be able to remove it from the device. When inserting a Memory Stick Duo into a Memory Stick Duo Adaptor, make sure the Memory Stick Duo is inserted facing in the correct direction, then insert it all the way in. Incorrect insertion may result in a malfunction. When using a Memory Stick Duo inserted into a Memory Stick Duo Adaptor with a Memory Stick compliant device, make sure that the Memory Stick Duo Adaptor is inserted facing the correct direction. Note that improper use may damage the equipment. Do not insert a Memory Stick Duo Adaptor into a Memory Stick compliant device without a Memory Stick Duo attached. Doing so may result in malfunction of the unit.
Notes on using Memory Stick PRO Duo (not supplied)
Memory Stick PRO Duo with a capacity up to 8 GB have been confirmed to operate properly with the camera.
Notes on using Memory Stick Micro (not supplied)
To use a Memory Stick Micro with the camera, be sure to insert the Memory Stick Micro into a Duo-sized M2 Adaptor. If you insert a Memory Stick Micro into the camera without a Duo-sized M2 Adaptor, you might not be able to remove it from the camera. Do not leave the Memory Stick Micro within the reach of small children. They might accidentally swallow it.

On the batteries

Batteries you can and cannot use with your camera
Battery type A B C Due to characteristics of alkaline batteries/Oxy Nickel Primary Battery, there is a large difference between the available shooting time and the available playback time. For this reason, the camera may turn off with the lens portion extended when you switch the mode dial. In this case, replace the batteries with new ones. Using the Nickel-Metal Hydride batteries allows you to shoot for longer periods of time.
LR6 (size AA) alkaline batteries* HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries* ZR6 (size AA) Oxy Nickel Primary Battery* Lithium batteries Manganese batteries Ni-Cd batteries
On Nickel-Metal Hydride batteries (not supplied)
Do not peel off the external seals or damage the batteries. Never use batteries from which the seals have been partially or completely removed, or batteries that have been split in any way. These may cause leakage, explosion, or heat-up of the battery, and personal scald or injury may be caused. These may cause a malfunction of the battery charger. Do not carry or store the Nickel-Metal Hydride batteries with metallic objects. Since metallic objects may short the + and ends, resulting in the risk of heating or fire. If the poles of the Nickel-Metal Hydride batteries are dirty, the batteries may not charge properly. Wipe them with a dry cloth, etc. At the time of purchase, or when the NickelMetal Hydride batteries have not been used for a long time, they may not full charge. This is typical of this type of battery, and is not a malfunction. If this happens, repeatedly using up the batteries fully, and then recharging them should correct the problem. If you recharge Nickel-Metal Hydride batteries before fully using up the existing charge, the low battery warning may be displayed sooner than expected. This is called the memory effect.* If this problem occurs, charging the batteries only after using up the existing charge will correct it. * The memory effect - the situation in which the capacity of the battery is temporarily lowered. To use up the batteries completely, put the camera in the slide show mode (page 44) and leave it that way until the batteries are used up. Do not mix new and used batteries. Do not expose the battery to water. The battery is not water-resistant.

 

Tags

Deskjet 656C NV-GS10 Articule ESF6132 FS-85USB 32A558p3F Kodak CD82 BF62ccst Sport 500 PV-GS55 3985 WPS Sbcru252-00H Dzmv100E Liquid MIX SF-555P 6317dwde REX RL40 Thruxton FS-9100DN RB216acrs Samsung 913V Moto Z6W Printer GR-642bepf KX-TS2365RUW Electronics MXT RC-5000I TX-32PS1F Dvdr3355-55 DSC-F717 Scanner LBT-GTZ4I AWF5120W LBP3360 VR-5505 KX-TG6413 Muratec F560 Acapulco CD51 MS9047 C Rd 168 Motorola K1M LN55C650 Festina 6433 DGX-210 DN360 ECV100-120 Driver Travelmate 230 2 6 WMB54G EC-01 4 5 Digital Camera HK3270 DCR-SX83 K700I Gaufrier Dmcfs30 Cgla23-4H 5 19 EV LX300 LI 3410 AR-235 GS500ET Euro-PRO Ep91 MP 161 LN40B530 D100E E13320 MP-200FM PMD430 Projector DCD-485 Asus W1J Pqg20 Slide SPR-4416 DCR-DVD508 LE46A656 CGC4009W SH-32 MP370 Xterra-2003 SC-AK600 FX-350ES CT700 29CC9RL CQ-DFX201N DCR-HC36 NAD 510 Review DCP-117C A785GM-le 128M Vector HR ZOB 460 KDL-52XBR9 AL2017 X4500 SD252 Eldorado 1993 SX230-2004 ICF-M770L Kxtga750

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101