0-360 Panoramic Optic Setup for Sony DCS-F717

Jog Dial

(wheel on top-front)
A note about Aperture, Depth of Field, and Field of View
Mode Dial Power Control Button Menu

Focus Adjust

Focus Switch Zoom
1) Mount Camera to tripod, with lens pointing vertically. 2) Thread 0-360 Panoramic Optic (with thread adapter) to camera. (Do not overtighten.) 3) Adjust tripod until Optic is vertical (refer to bubble level on top of Optic). 4) Turn Power on. 5) First time setup: Press "MENU". Then use Control Button to set: ---ISO (Sensitivity) to "100" or "AUTO" ---IMAGE SIZE to "2560x1920" ---P.QUALITY ( ) to "FINE" Press "MENU" again to continue. 6) Turn Mode Dial to "A" (Aperture Priority) 7) Rotate Jog Dial to access Aperture (F-number on right of screen). Press Jog Dial down and rotate until "F8.0" appears on screen. This is your Aperture (F-stop). 8) Set Focus Switch to "MANUAL". 9) Rotate Focus Adjust until " 0.20m" appears on screen. 10) Adjust Zoom until image of mirror just fills frame. (NOTE: Depending on your camera's
threads, the image may be slightly off-center. This is normal. A trick is to use a thin piece of paper or tape as a shim to align to center.)
Aperture- a mechanism behind the camera lens similar to the iris of your eye, opening and closing to adjust the amount of light entering the camera. The aperture opening also determines the Depth of Field of the image. Depth of Field- describes the objects in the image which are in focus, in terms of their distance from the camera. For example, a camera focused at 30m, with a Depth of Field of 8m, will have objects from 26-34m from the camera in focus. Objects closer than 26m or further than 34m will start to become blurry. Field of View- the vertical Field of View (vFOV) of the 0-360 attachment. The 0-360 has a vFOV of 100+ degrees, meaning it will see from 50+ above the horizon to 50+ below the horizon. A smaller Aperture opening (higher F-Stop number) allows less light to enter the camera, but yields a higher Depth of Field. With a high F-Stop, the shutter speed needs to be slowed down to allow more light (else a dark photo), but will have more Depth of Field in focus. A larger Aperture opening (lower F-Stop number) allows more light to enter the camera, but a lower Depth of Field. This means the shutter speed can be faster, but fewer objects will be in focus. (With slower shutter speeds, moving objects may blur.) The 0-360 is designed to operate with a camera F-Stop of F8.0 or higher (preferably 9 or 10). This provides a high enough Depth of Field to allow the entire mirror to be in focus. With lower F-stops, the shutter speed can be increased, but the upper or lower portions (or both) of the mirror may not be entirely in focus. This means the image far above or far below the horizon may not be sharply focused. This may not be a problem, as many times the sky or the ground may not need to be sharply focused. With the Sony DSC-F717, you should be able to get a vFOV of approximately 100 degrees, with good focus across the entire image. For best results, shoot a well-lit scene! With high F-Stops, you need good lighting, or longer exposure times.
11) Press Control Button Up to turn flash off. (A
will appear on the screen) will appear on the screen)
12) Press Control Button Down to turn timer on. (A
13) Press the shutter release. You have 10 seconds to hide! 14) Advanced Users: To adjust exposures, use Manual setting, instead of Aperture Priority. Keep the Aperture at F8.0, but experiment with the exposure times. Also experiment with Sharpening, Noise Reduction, ISO and other advanced settings.
hank you for purchasing the 0-360 Panoramic Optic! With proper care and handling, he Optic should give you years of service. Here are a few important handling nstructions: ) Do not touch, handle, or polish the mirror! While the mirror does have a protective oating, touching or rubbing on its surface can cause scratches. Use the dust blower rovided to remove dust before shooting. Use lens cleaning paper or lens cloth only if bsolutely necessary, and rub gently. NEVER use a paper towel or other material to clean. ) Avoid dropping or mishandling the unit, as it is a sensitive glass optical device. ) Store the unit in its carrying case when not in use, in an upright position and in a ool, dry environment. ) Use care in threading the Optic into your camera, avoiding cross-threading.

he 0-360 Panoramic Optic is warranted against defects in material and workmanship or a period of one year from date of purchase. This warranty does not cover damage aused by accident, abuse, misuse, exposure to the elements, or scratches to the irror surface. If a defect in workmanship or material is discovered, 0-360.com will, at ts option, repair or replace the Optic free of charge. Purchaser must first obtain a eturn Authorization from 0-360.com, and return the unit properly packaged and reight prepaid. 0-360.com's liability is limited to repair or replacement of the Optic nly. This warranty supersedes all other warranties, express or implied.
div. of Bellissimo, Inc. 2483 Simons Ct. Carson City, NV 89703 sales@0-360.com
IMPORTANT! Care Instructions WARRANTY ENJOY!
Please read the Care Instructions on back page.
Instructions for use with Sony Cybershot DSC-F717

Quick Start Guide

IMPORTANT!

Adapter : None Egg Adapter Ring : 58 to 49mm & 49 to 46mm Sensor : 5 Megapixels
Elements in bold correlate with the controls on your camera. Please see the Sony Digital Still Camera manual for the specific location of controls.
Sony Cybershot DSC - F717
1. 2. 3. 4. Turn camera on. Select Aperture Priority Mode by rotating the Mode Dial to A. Press the MENU button on the backside of the digital camera. Using the arrows on the Control button to select: ISO menu and highlight Auto IMAGE SIZE menu and highlight 2048x1536 or higher P.QUALITY menu and select FINE REC MODE menu and select NORMAL SHARPNESS menu and select +1 5. 6. Press the MENU button to close the menu window. Turn the Jog Dial on the aperture (F7.1 on the LCD screen), press it, and turn it again to select the proper F-Stop. We recommend an f-stop between F7.1. Interior shots or other low light situations will require the use of a tripod. 7. Turn the Jog Dial on the EV (Above the F 7.1), press it, and turn it again to select the shutter speed until the EV number above turns to 0 EV (Above the F7.1). 8. Press the Control button center of the LCD screen. 9. Press the Focus button to Manual and move the cylinder on the camera to adjust the focus length of.20 M. The icon will appear on the upper left of the LCD screen. to select the Self Timer. The icon will appear on the upper

Page 1 of 2

Compatibility : Tested / Approved *
10. Press the Control button left of the LCD screen.
twice to turn the Flash Off
. The icon will appear in the upper
11. Make sure the NIGHTSHOT/NIGHTFRAMING switch is off
12. Use the Zoom button to just fill the LCD screen with the EGG image. The image may not be centered this is normal. 13. Make sure the Mode Dial is still set to A. Press and hold down the shutter button until the Self-Timer begins counting down.
You may need to adjust White Balance, or other settings dependent upon the requirements of the situation. Some settings will remain selected when the camera is shut off, others will need to be reset each time the camera is turned on. All other settings are factory default.

Page 2 of 2